aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
AgeCommit message (Expand)Author
2022-05-09Merge branch 'v5.4/standard/base' into v5.4/standard/ti-j72xBruce Ashfield
2022-05-09serial: 8250: Correct the clock for EndRun PTP/1588 PCIe deviceMaciej W. Rozycki
2022-05-09serial: 8250: Also set sticky MCR bits in console restorationMaciej W. Rozycki
2022-05-09serial: imx: fix overrun interrupts in DMA modeJohan Hovold
2022-04-20Merge branch 'v5.4/standard/base' into v5.4/standard/ti-j72xBruce Ashfield
2022-04-15serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()Jiri Slaby
2022-04-15kgdboc: fix return value of __setup handlerRandy Dunlap
2022-04-15serial: 8250: Fix race condition in RTS-after-send handlingUwe Kleine-König
2022-04-15serial: 8250_mid: Balance reference count for PCI DMA deviceAndy Shevchenko
2022-03-02Merge branch 'v5.4/standard/base' into v5.4/standard/ti-j72xBruce Ashfield
2022-02-23serial: parisc: GSC: fix build when IOSAPIC is not setRandy Dunlap
2022-02-03Merge branch 'v5.4/standard/base' into v5.4/standard/ti-j72xBruce Ashfield
2022-02-01tty: Add support for Brainboxes UC cards.Cameron Williams
2022-02-01serial: stm32: fix software flow control transferValentin Caron
2022-02-01serial: 8250: of: Fix mapped region size when using reg-offset propertyRobert Hancock
2022-01-27serial: Fix incorrect rs485 polarity on uart openLukas Wunner
2022-01-27serial: core: Keep mctrl register state and cached copy in syncLukas Wunner
2022-01-27serial: pl010: Drop CR register reset on set_termiosLukas Wunner
2022-01-27serial: amba-pl011: do not request memory region twiceLino Sanfilippo
2022-01-27tty: serial: uartlite: allow 64 bit addressLizhi Hou
2022-01-27tty: serial: atmel: Call dma_async_issue_pending()Tudor Ambarus
2022-01-27tty: serial: atmel: Check return code of dmaengine_submit()Tudor Ambarus
2021-12-30Merge branch 'v5.4/standard/base' into v5.4/standard/ti-j72xBruce Ashfield
2021-12-29serial: 8250_fintek: Fix garbled text for consoleJi-Ze Hong (Peter Hong)
2021-12-14Merge branch 'v5.4/standard/base' into v5.4/standard/ti-j72xBruce Ashfield
2021-12-14serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30Patrik John
2021-12-08serial: 8250_pci: rewrite pericom_do_set_divisor()Jay Dolan
2021-12-08serial: 8250_pci: Fix ACCES entries in pci_serial_quirks arrayJay Dolan
2021-12-08serial: core: fix transmit-buffer reset and memleakJohan Hovold
2021-12-08serial: pl011: Add ACPI SBSA UART match idPierre Gondois
2021-12-08tty: serial: msm_serial: Deactivate RX DMA for polling supportSven Eckelmann
2021-11-29Merge branch 'v5.4/standard/base' into v5.4/standard/ti-j72xBruce Ashfield
2021-11-17serial: xilinx_uartps: Fix race condition causing stuck TXAnssi Hannula
2021-11-17serial: 8250_dw: Drop wrong use of ACPI_PTR()Andy Shevchenko
2021-11-17serial: core: Fix initializing and restoring termios speedPali Rohár
2021-10-03Merge branch 'v5.4/standard/base' into v5.4/standard/ti-j72xBruce Ashfield
2021-09-30serial: mvebu-uart: fix driver's tx_empty callbackPali Rohár
2021-09-27Merge branch 'v5.4/standard/base' into v5.4/standard/ti-j72xBruce Ashfield
2021-09-27Merge branch 'v5.4/standard/base' into v5.4/standard/ti-j72xBruce Ashfield
2021-09-22serial: sh-sci: fix break handling for sysrqUlrich Hecht
2021-09-22serial: 8250_pci: make setup_port() parameters explicitly unsignedGreg Kroah-Hartman
2021-09-22serial: 8250: Define RX trigger levels for OxSemi 950 devicesMaciej W. Rozycki
2021-09-22tty: serial: jsm: hold port lock when reporting modem line changesZheyu Ma
2021-09-15tty: serial: fsl_lpuart: fix the wrong mapbase valueAndy Duan
2021-08-17Merge branch 'v5.4/standard/base' into v5.4/standard/ti-j72xBruce Ashfield
2021-08-12serial: 8250_pci: Avoid irq sharing for MSI(-X) interrupts.Mario Kleiner
2021-08-12serial: 8250_pci: Enumerate Elkhart Lake UARTs via dedicated driverAndy Shevchenko
2021-08-12serial: 8250: Mask out floating 16/32-bit bus bitsMaciej W. Rozycki
2021-08-12serial: 8250_mtk: fix uart corruption issue when rx power offZhiyong Tao
2021-08-12serial: tegra: Only print FIFO error message when an error occursJon Hunter