summaryrefslogtreecommitdiffstats
path: root/drivers/tty/hvc
AgeCommit message (Collapse)Author
2020-10-29tty: hvcs: Don't NULL tty->driver_data until hvcs_cleanup()Tyrel Datwyler
[ Upstream commit 63ffcbdad738e3d1c857027789a2273df3337624 ] The code currently NULLs tty->driver_data in hvcs_close() with the intent of informing the next call to hvcs_open() that device needs to be reconfigured. However, when hvcs_cleanup() is called we copy hvcsd from tty->driver_data which was previoulsy NULLed by hvcs_close() and our call to tty_port_put(&hvcsd->port) doesn't actually do anything since &hvcsd->port ends up translating to NULL by chance. This has the side effect that when hvcs_remove() is called we have one too many port references preventing hvcs_destuct_port() from ever being called. This also prevents us from reusing the /dev/hvcsX node in a future hvcs_probe() and we can eventually run out of /dev/hvcsX devices. Fix this by waiting to NULL tty->driver_data in hvcs_cleanup(). Fixes: 27bf7c43a19c ("TTY: hvcs, add tty install") Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Link: https://lore.kernel.org/r/20200820234643.70412-1-tyreld@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30Revert "tty: hvc: Fix data abort due to race in hvc_open"Greg Kroah-Hartman
commit cf9c94456ebafc6d75a834e58dfdc8ae71a3acbc upstream. This reverts commit e2bd1dcbe1aa34ff5570b3427c530e4332ecf0fe. In discussion on the mailing list, it has been determined that this is not the correct type of fix for this issue. Revert it so that we can do this correctly. Reported-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200428032601.22127-1-rananta@codeaurora.org Cc: Raghavendra Rao Ananta <rananta@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-25tty: hvc: Fix data abort due to race in hvc_openRaghavendra Rao Ananta
[ Upstream commit e2bd1dcbe1aa34ff5570b3427c530e4332ecf0fe ] Potentially, hvc_open() can be called in parallel when two tasks calls open() on /dev/hvcX. In such a scenario, if the hp->ops->notifier_add() callback in the function fails, where it sets the tty->driver_data to NULL, the parallel hvc_open() can see this NULL and cause a memory abort. Hence, serialize hvc_open and check if tty->private_data is NULL before proceeding ahead. The issue can be easily reproduced by launching two tasks simultaneously that does nothing but open() and close() on /dev/hvcX. For example: $ ./simple_open_close /dev/hvc0 & ./simple_open_close /dev/hvc0 & Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org> Link: https://lore.kernel.org/r/20200428032601.22127-1-rananta@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-10tty: hvc_console, fix crashes on parallel open/closeJiri Slaby
commit 24eb2377f977fe06d84fca558f891f95bc28a449 upstream. hvc_open sets tty->driver_data to NULL when open fails at some point. Typically, the failure happens in hp->ops->notifier_add(). If there is a racing process which tries to open such mangled tty, which was not closed yet, the process will crash in hvc_open as tty->driver_data is NULL. All this happens because close wants to know whether open failed or not. But ->open should not NULL this and other tty fields for ->close to be happy. ->open should call tty_port_set_initialized(true) and close should check by tty_port_initialized() instead. So do this properly in this driver. So this patch removes these from ->open: * tty_port_tty_set(&hp->port, NULL). This happens on last close. * tty->driver_data = NULL. Dtto. * tty_port_put(&hp->port). This happens in shutdown and until now, this must have been causing a reference underflow, if I am not missing something. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Reported-and-tested-by: Raghavendra <rananta@codeaurora.org> Link: https://lore.kernel.org/r/20200526145632.13879-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29tty: hvc: fix buffer overflow during hvc_alloc().Andrew Melnychenko
commit 9a9fc42b86c06120744555fea43fdcabe297c656 upstream. If there is a lot(more then 16) of virtio-console devices or virtio_console module is reloaded - buffers 'vtermnos' and 'cons_ops' are overflowed. In older kernels it overruns spinlock which leads to kernel freezing: https://bugzilla.redhat.com/show_bug.cgi?id=1786239 To reproduce the issue, you can try simple script that loads/unloads module. Something like this: while [ 1 ] do modprobe virtio_console sleep 2 modprobe -r virtio_console sleep 2 done Description of problem: Guest get 'Call Trace' when loading module "virtio_console" and unloading it frequently - clearly reproduced on kernel-4.18.0: [ 81.498208] ------------[ cut here ]------------ [ 81.499263] pvqspinlock: lock 0xffffffff92080020 has corrupted value 0xc0774ca0! [ 81.501000] WARNING: CPU: 0 PID: 785 at kernel/locking/qspinlock_paravirt.h:500 __pv_queued_spin_unlock_slowpath+0xc0/0xd0 [ 81.503173] Modules linked in: virtio_console fuse xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nft_counter nf_nat_tftp nft_objref nf_conntrack_tftp tun bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 nft_chain_route_ipv6 nft_chain_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack nft_chain_route_ipv4 ip6_tables nft_compat ip_set nf_tables nfnetlink sunrpc bochs_drm drm_vram_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm i2c_piix4 pcspkr crct10dif_pclmul crc32_pclmul joydev ghash_clmulni_intel ip_tables xfs libcrc32c sd_mod sg ata_generic ata_piix virtio_net libata crc32c_intel net_failover failover serio_raw virtio_scsi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: virtio_console] [ 81.517019] CPU: 0 PID: 785 Comm: kworker/0:2 Kdump: loaded Not tainted 4.18.0-167.el8.x86_64 #1 [ 81.518639] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014 [ 81.520205] Workqueue: events control_work_handler [virtio_console] [ 81.521354] RIP: 0010:__pv_queued_spin_unlock_slowpath+0xc0/0xd0 [ 81.522450] Code: 07 00 48 63 7a 10 e8 bf 64 f5 ff 66 90 c3 8b 05 e6 cf d6 01 85 c0 74 01 c3 8b 17 48 89 fe 48 c7 c7 38 4b 29 91 e8 3a 6c fa ff <0f> 0b c3 0f 0b 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 [ 81.525830] RSP: 0018:ffffb51a01ffbd70 EFLAGS: 00010282 [ 81.526798] RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000000 [ 81.528110] RDX: ffff9e66f1826480 RSI: ffff9e66f1816a08 RDI: ffff9e66f1816a08 [ 81.529437] RBP: ffffffff9153ff10 R08: 000000000000026c R09: 0000000000000053 [ 81.530732] R10: 0000000000000000 R11: ffffb51a01ffbc18 R12: ffff9e66cd682200 [ 81.532133] R13: ffffffff9153ff10 R14: ffff9e6685569500 R15: ffff9e66cd682000 [ 81.533442] FS: 0000000000000000(0000) GS:ffff9e66f1800000(0000) knlGS:0000000000000000 [ 81.534914] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 81.535971] CR2: 00005624c55b14d0 CR3: 00000003a023c000 CR4: 00000000003406f0 [ 81.537283] Call Trace: [ 81.537763] __raw_callee_save___pv_queued_spin_unlock_slowpath+0x11/0x20 [ 81.539011] .slowpath+0x9/0xe [ 81.539585] hvc_alloc+0x25e/0x300 [ 81.540237] init_port_console+0x28/0x100 [virtio_console] [ 81.541251] handle_control_message.constprop.27+0x1c4/0x310 [virtio_console] [ 81.542546] control_work_handler+0x70/0x10c [virtio_console] [ 81.543601] process_one_work+0x1a7/0x3b0 [ 81.544356] worker_thread+0x30/0x390 [ 81.545025] ? create_worker+0x1a0/0x1a0 [ 81.545749] kthread+0x112/0x130 [ 81.546358] ? kthread_flush_work_fn+0x10/0x10 [ 81.547183] ret_from_fork+0x22/0x40 [ 81.547842] ---[ end trace aa97649bd16c8655 ]--- [ 83.546539] general protection fault: 0000 [#1] SMP NOPTI [ 83.547422] CPU: 5 PID: 3225 Comm: modprobe Kdump: loaded Tainted: G W --------- - - 4.18.0-167.el8.x86_64 #1 [ 83.549191] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014 [ 83.550544] RIP: 0010:__pv_queued_spin_lock_slowpath+0x19a/0x2a0 [ 83.551504] Code: c4 c1 ea 12 41 be 01 00 00 00 4c 8d 6d 14 41 83 e4 03 8d 42 ff 49 c1 e4 05 48 98 49 81 c4 40 a5 02 00 4c 03 24 c5 60 48 34 91 <49> 89 2c 24 b8 00 80 00 00 eb 15 84 c0 75 0a 41 0f b6 54 24 14 84 [ 83.554449] RSP: 0018:ffffb51a0323fdb0 EFLAGS: 00010202 [ 83.555290] RAX: 000000000000301c RBX: ffffffff92080020 RCX: 0000000000000001 [ 83.556426] RDX: 000000000000301d RSI: 0000000000000000 RDI: 0000000000000000 [ 83.557556] RBP: ffff9e66f196a540 R08: 000000000000028a R09: ffff9e66d2757788 [ 83.558688] R10: 0000000000000000 R11: 0000000000000000 R12: 646e61725f770b07 [ 83.559821] R13: ffff9e66f196a554 R14: 0000000000000001 R15: 0000000000180000 [ 83.560958] FS: 00007fd5032e8740(0000) GS:ffff9e66f1940000(0000) knlGS:0000000000000000 [ 83.562233] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 83.563149] CR2: 00007fd5022b0da0 CR3: 000000038c334000 CR4: 00000000003406e0 Signed-off-by: Andrew Melnychenko <andrew@daynix.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200414191503.3471783-1-andrew@daynix.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09powerpc/pseries/hvconsole: Fix stack overread via udbgDaniel Axtens
[ Upstream commit 934bda59f286d0221f1a3ebab7f5156a996cc37d ] While developing KASAN for 64-bit book3s, I hit the following stack over-read. It occurs because the hypercall to put characters onto the terminal takes 2 longs (128 bits/16 bytes) of characters at a time, and so hvc_put_chars() would unconditionally copy 16 bytes from the argument buffer, regardless of supplied length. However, udbg_hvc_putc() can call hvc_put_chars() with a single-byte buffer, leading to the error. ================================================================== BUG: KASAN: stack-out-of-bounds in hvc_put_chars+0xdc/0x110 Read of size 8 at addr c0000000023e7a90 by task swapper/0 CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc2-next-20190528-02824-g048a6ab4835b #113 Call Trace: dump_stack+0x104/0x154 (unreliable) print_address_description+0xa0/0x30c __kasan_report+0x20c/0x224 kasan_report+0x18/0x30 __asan_report_load8_noabort+0x24/0x40 hvc_put_chars+0xdc/0x110 hvterm_raw_put_chars+0x9c/0x110 udbg_hvc_putc+0x154/0x200 udbg_write+0xf0/0x240 console_unlock+0x868/0xd30 register_console+0x970/0xe90 register_early_udbg_console+0xf8/0x114 setup_arch+0x108/0x790 start_kernel+0x104/0x784 start_here_common+0x1c/0x534 Memory state around the buggy address: c0000000023e7980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0000000023e7a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 >c0000000023e7a80: f1 f1 01 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 ^ c0000000023e7b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0000000023e7b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Document that a 16-byte buffer is requred, and provide it in udbg. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-22tty: Don't force RISCV SBI console as preferred consoleAnup Patel
commit f91253a3d005796404ae0e578b3394459b5f9b71 upstream. The Linux kernel will auto-disables all boot consoles whenever it gets a preferred real console. Currently on RISC-V systems, if we have a real console which is not RISCV SBI console then boot consoles (such as earlycon=sbi) are not auto-disabled when a real console (ttyS0 or ttySIF0) is available. This results in duplicate prints at boot-time after kernel starts using real console (i.e. ttyS0 or ttySIF0) if "earlycon=" kernel parameter was passed by bootloader. The reason for above issue is that RISCV SBI console always adds itself as preferred console which is causing other real consoles to be not used as preferred console. Ideally "console=" kernel parameter passed by bootloaders should be the one selecting a preferred real console. This patch fixes above issue by not forcing RISCV SBI console as preferred console. Fixes: afa6b1ccfad5 ("tty: New RISC-V SBI console driver") Cc: stable@vger.kernel.org Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10tty: hvc: hvc_write() fix break conditionNicholas Piggin
Commit 550ddadcc758 ("tty: hvc: hvc_write() may sleep") broke the termination condition in case the driver stops accepting characters. This can result in unnecessary polling of the busy driver. Restore it by testing the hvc_push return code. Tested-by: Matteo Croce <mcroce@redhat.com> Tested-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10tty: hvc: hvc_poll() fix read loop batchingNicholas Piggin
Commit ec97eaad1383 ("tty: hvc: hvc_poll() break hv read loop") removes get_chars batching entirely, which slows down large console operations like paste -- virtio console "feels worse than a 9600 baud serial line," reports Matteo. This adds back batching in a more latency friendly way. If the caller can sleep then we try to fill the entire flip buffer, releasing the lock and scheduling between each iteration. If it can not sleep, then batches are limited to 128 bytes. Matteo confirms this fixes the performance problem. Latency testing the powerpc OPAL console with OpenBMC UART with a large paste shows about 0.25ms latency, which seems reasonable. 10ms latencies were typical for this case before the latency breaking work, so we still see most of the benefit. kopald-1204 0d.h. 5us : hvc_poll <-hvc_handle_interrupt kopald-1204 0d.h. 5us : __hvc_poll <-hvc_handle_interrupt kopald-1204 0d.h. 5us : _raw_spin_lock_irqsave <-__hvc_poll kopald-1204 0d.h. 5us : tty_port_tty_get <-__hvc_poll kopald-1204 0d.h. 6us : _raw_spin_lock_irqsave <-tty_port_tty_get kopald-1204 0d.h. 6us : _raw_spin_unlock_irqrestore <-tty_port_tty_get kopald-1204 0d.h. 6us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 7us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 7us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 36us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 36us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 36us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 65us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 65us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 66us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 94us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 95us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 95us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 124us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 124us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 125us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 154us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 154us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 154us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 183us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 184us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 184us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 213us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 213us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 213us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 242us : _raw_spin_unlock_irqrestore <-__hvc_poll kopald-1204 0d.h. 242us : tty_flip_buffer_push <-__hvc_poll kopald-1204 0d.h. 243us : queue_work_on <-tty_flip_buffer_push kopald-1204 0d.h. 243us : tty_kref_put <-__hvc_poll kopald-1204 0d.h. 243us : hvc_kick <-hvc_handle_interrupt kopald-1204 0d.h. 243us : wake_up_process <-hvc_kick kopald-1204 0d.h. 244us : try_to_wake_up <-hvc_kick kopald-1204 0d.h. 244us : _raw_spin_lock_irqsave <-try_to_wake_up kopald-1204 0d.h. 244us : _raw_spin_unlock_irqrestore <-try_to_wake_up Reported-by: Matteo Croce <mcroce@redhat.com> Tested-by: Matteo Croce <mcroce@redhat.com> Tested-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10tty: hvc: hvc_poll() fix read loop hangNicholas Piggin
Commit ec97eaad1383 ("tty: hvc: hvc_poll() break hv read loop") causes the virtio console to hang at times (e.g., if you paste a bunch of characters to it. The reason is that get_chars must return 0 before we can be sure the driver will kick or poll input again, but this change only scheduled a poll if get_chars had returned a full count. Change this to poll on any > 0 count. Reported-by: Matteo Croce <mcroce@redhat.com> Reported-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Matteo Croce <mcroce@redhat.com> Tested-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-20powerpc/powernv: provide a console flush operation for opal hvc driverNicholas Piggin
Provide the flush hv_op for the opal hvc driver. This will flush the firmware console buffers without spinning with interrupts disabled. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-13Merge branch 'topic/hvc' into nextMichael Ellerman
This branch held some hvc related commits (Hypervisor Virtual Console) so that they could get some wider testing in linux-next before merging.
2018-07-24tty: hvc: remove unexplained "just in case" spin delayNicholas Piggin
This delay was in the very first OPAL console commit 6.5 years ago, and came from the vio hvc driver. The firmware console has hardened sufficiently to remove it. Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-24powerpc/powernv: implement opal_put_chars_atomicNicholas Piggin
The RAW console does not need writes to be atomic, so relax opal_put_chars to be able to do partial writes, and implement an _atomic variant which does not take a spinlock. This API is used in xmon, so the less locking that is used, the better chance there is that a crash can be debugged. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-24powerpc/powernv: move opal console flushing to udbgNicholas Piggin
OPAL console writes do not have to synchronously flush firmware / hardware buffers unless they are going through the udbg path. Remove the unconditional flushing from opal_put_chars. Flush if there was no space in the buffer as an optimisation (callers loop waiting for success in that case). udbg flushing is moved to udbg_opal_putc. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-23tty: hvc: introduce the hv_ops.flush operation for hvc driversNicholas Piggin
Use .flush to wait for drivers to flush their console outside of the spinlock, to reduce lock/irq latencies. Flush the hvc console driver after each write, which can help messages make it out to the console after a crash. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-23tty: hvc: hvc_write() may sleepNicholas Piggin
Rework the hvc_write loop to drop and re-take the spinlock on each iteration, add a cond_resched. Don't bother with an initial hvc_push initially, which makes the logic simpler -- just do a hvc_push on each time around the loop. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-23tty: hvc: hvc_poll() may sleepNicholas Piggin
Introduce points where hvc_poll drops the lock, enables interrupts, and reschedules. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-23tty: hvc: hvc_poll() break hv read loopNicholas Piggin
Avoid looping with the spinlock held while there is read data being returned from the hv driver. Instead note if the entire size returned by tty_buffer_request_room was read, and request another read poll. This limits the critical section lengths, and provides more even service to other consoles in case there is a pathological condition. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-23tty: hvc: use mutex instead of spinlock for hvc_structs lockNicholas Piggin
This allows hvc operations to sleep under the lock. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-03hvc_opal: don't set tb_ticks_per_usec in udbg_init_opal_common()Stewart Smith
time_init() will set up tb_ticks_per_usec based on reality. time_init() is called *after* udbg_init_opal_common() during boot. from arch/powerpc/kernel/time.c: unsigned long tb_ticks_per_usec = 100; /* sane default */ Currently, all powernv systems have a timebase frequency of 512mhz (512000000/1000000 == 0x200) - although there's nothing written down anywhere that I can find saying that we couldn't make that different based on the requirements in the ISA. So, we've been (accidentally) thwacking the (currently) correct (for powernv at least) value for tb_ticks_per_usec earlier than we otherwise would have. The "sane default" seems to be adequate for our purposes between udbg_init_opal_common() and time_init() being called, and if it isn't, then we should probably be setting it somewhere that isn't hvc_opal.c! Signed-off-by: Stewart Smith <stewart@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-04Merge tag 'tty-4.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver patches for 4.17-rc1 Not all that big really, most are just small fixes and additions to existing drivers. There's a bunch of work on the imx serial driver recently for some reason, and a new embedded serial driver added as well. Full details are in the shortlog. All of these have been in the linux-next tree for a while with no reported issues" * tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits) serial: expose buf_overrun count through proc interface serial: mvebu-uart: fix tx lost characters tty: serial: msm_geni_serial: Fix return value check in qcom_geni_serial_probe() tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP 8250-men-mcb: add support for 16z025 and 16z057 powerpc: Mark the variable earlycon_acpi_spcr_enable maybe_unused serial: stm32: fix initialization of RS485 mode ARM: dts: STi: Remove "console=ttyASN" from bootargs for STi boards vt: change SGR 21 to follow the standards serdev: Fix typo in serdev_device_alloc ARM: dts: STi: Fix aliases property name for STi boards tty: st-asc: Update tty alias serial: stm32: add support for RS485 hardware control mode dt-bindings: serial: stm32: add RS485 optional properties selftests: add devpts selftests devpts: comment devpts_mntget() devpts: resolve devpts bind-mounts devpts: hoist out check for DEVPTS_SUPER_MAGIC serial: 8250: Add Nuvoton NPCM UART serial: mxs-auart: disable clks of Alphascale ASM9260 ...
2018-03-26tty: hvc: remove tile driverArnd Bergmann
The Tile architecture is obsolete and getting removed from the kernel, this removes the corresponding console driver as well. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26tty: remove bfin_jtag_comm and hvc_bfin_jtag driversArnd Bergmann
The blackfin architecture is getting removed, so these drivers are not needed any more. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-09tty: New RISC-V SBI console driverPalmer Dabbelt
The RISC-V ISA defines a simple console that is availiable via SBI calls on all systems. The SBI console is designed to be availiable at all times, so while it's most natural to use this as an early printk target it's also possible to use this as the system console when there isn't a better one availiable. This patch adds support for the RISC-V SBI console via the HVC infastructure. It's entirely independent from our early printk support, which results in early boot messages appearing twice over the SBI console. As far as I can tell that's the fault of our early printk support (we should support earlycon) as opposed to this driver. There is one checkpatch.pl warning here: to check the MAINTAINERS file. They're all matched by the "K: riscv" line. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-13Merge tag 'tty-4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big tty/serial driver pull request for 4.15-rc1. Lots of serial driver updates in here, some small vt cleanups, and a raft of SPDX and license boilerplate cleanups, messing up the diffstat a bit. Nothing major, with no realy functional changes except better hardware support for some platforms. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (110 commits) tty: ehv_bytechan: fix spelling mistake tty: serial: meson: allow baud-rates lower than 9600 serial: 8250_fintek: Fix crash with baud rate B0 serial: 8250_fintek: Disable delays for ports != 0 serial: 8250_fintek: Return -EINVAL on invalid configuration tty: Remove redundant license text tty: serdev: Remove redundant license text tty: hvc: Remove redundant license text tty: serial: Remove redundant license text tty: add SPDX identifiers to all remaining files in drivers/tty/ tty: serial: jsm: remove redundant pointer ts tty: serial: jsm: add space before the open parenthesis '(' tty: serial: jsm: fix coding style tty: serial: jsm: delete space between function name and '(' tty: serial: jsm: add blank line after declarations tty: serial: jsm: change the type of local variable tty: serial: imx: remove dead code imx_dma_rxint tty: serial: imx: disable ageing timer interrupt if dma in use serial: 8250: fix potential deadlock in rs485-mode serial: m32r_sio: Drop redundant .data assignment ...
2017-11-08tty: hvc: Remove redundant license textGreg Kroah-Hartman
Now that the SPDX tag is in all tty files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Jiri Slaby <jslaby@suse.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Metcalf <cmetcalf@mellanox.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08tty: add SPDX identifiers to all remaining files in drivers/tty/Greg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/tty files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Jiri Slaby <jslaby@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: James Hogan <jhogan@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: "Uwe Kleine-König" <kernel@pengutronix.de> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-07Merge tag 'powerpc-4.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Nothing really major this release, despite quite a lot of activity. Just lots of things all over the place. Some things of note include: - Access via perf to a new type of PMU (IMC) on Power9, which can count both core events as well as nest unit events (Memory controller etc). - Optimisations to the radix MMU TLB flushing, mostly to avoid unnecessary Page Walk Cache (PWC) flushes when the structure of the tree is not changing. - Reworks/cleanups of do_page_fault() to modernise it and bring it closer to other architectures where possible. - Rework of our page table walking so that THP updates only need to send IPIs to CPUs where the affected mm has run, rather than all CPUs. - The size of our vmalloc area is increased to 56T on 64-bit hash MMU systems. This avoids problems with the percpu allocator on systems with very sparse NUMA layouts. - STRICT_KERNEL_RWX support on PPC32. - A new sched domain topology for Power9, to capture the fact that pairs of cores may share an L2 cache. - Power9 support for VAS, which is a new mechanism for accessing coprocessors, and initial support for using it with the NX compression accelerator. - Major work on the instruction emulation support, adding support for many new instructions, and reworking it so it can be used to implement the emulation needed to fixup alignment faults. - Support for guests under PowerVM to use the Power9 XIVE interrupt controller. And probably that many things again that are almost as interesting, but I had to keep the list short. Plus the usual fixes and cleanups as always. Thanks to: Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Arvind Yadav, Balbir Singh, Benjamin Herrenschmidt, Bhumika Goyal, Breno Leitao, Bryant G. Ly, Christophe Leroy, Cédric Le Goater, Dan Carpenter, Dou Liyang, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Hannes Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall, LABBE Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring, Masahiro Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Rashmica Gupta, Rob Herring, Rui Teng, Sam Bobroff, Santosh Sivaraj, Scott Wood, Shilpasri G Bhat, Sukadev Bhattiprolu, Suraj Jitindar Singh, Tobin C. Harding, Victor Aoqui" * tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (321 commits) powerpc/xive: Fix section __init warning powerpc: Fix kernel crash in emulation of vector loads and stores powerpc/xive: improve debugging macros powerpc/xive: add XIVE Exploitation Mode to CAS powerpc/xive: introduce H_INT_ESB hcall powerpc/xive: add the HW IRQ number under xive_irq_data powerpc/xive: introduce xive_esb_write() powerpc/xive: rename xive_poke_esb() in xive_esb_read() powerpc/xive: guest exploitation of the XIVE interrupt controller powerpc/xive: introduce a common routine xive_queue_page_alloc() powerpc/sstep: Avoid used uninitialized error axonram: Return directly after a failed kzalloc() in axon_ram_probe() axonram: Improve a size determination in axon_ram_probe() axonram: Delete an error message for a failed memory allocation in axon_ram_probe() powerpc/powernv/npu: Move tlb flush before launching ATSD powerpc/macintosh: constify wf_sensor_ops structures powerpc/iommu: Use permission-specific DEVICE_ATTR variants powerpc/eeh: Delete an error out of memory message at init time powerpc/mm: Use seq_putc() in two functions macintosh: Convert to using %pOF instead of full_name ...
2017-09-05Merge tag 'tty-4.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big tty/serial driver update for 4.14-rc1. Well, not all that big, just a number of small serial driver fixes, and a new serial driver. Also in here are some much needed goldfish tty driver (emulator) fixes to try to get that codebase under control. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (94 commits) tty: goldfish: Implement support for kernel 'earlycon' parameter tty: goldfish: Use streaming DMA for r/w operations on Ranchu platforms tty: goldfish: Refactor constants to better reflect their nature serial: 8250_port: Remove useless NULL checks earlycon: initialise baud field of earlycon device structure tty: hvcs: make ktermios const pty: show associative slave of ptmx in fdinfo tty: n_gsm: Add compat_ioctl tty: hvcs: constify vio_device_id tty: hvc_vio: constify vio_device_id tty: mips_ejtag_fdc: constify mips_cdmm_device_id Introduce 8250_men_mcb mcb: introduce mcb_get_resource() serial: imx: Avoid post-PIO cleanup if TX DMA is started tty: serial: imx: disable irq after suspend serial: 8250_uniphier: add suspend/resume support serial: 8250_uniphier: use CHAR register for canary to detect power-off serial: 8250_uniphier: fix serial port index in private data serial: 8250: of: Add new port type for MediaTek BTIF controller on MT7622/23 SoC dt-bindings: serial: 8250: Add MediaTek BTIF controller bindings ...
2017-08-29tty: hvcs: make ktermios constBhumika Goyal
Make this const as it is not modified anywhere. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28tty: hvcs: constify vio_device_idArvind Yadav
vio_device_id are not supposed to change at runtime. All functions working with vio_device_id provided by <asm/vio.h> work with const vio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28tty: hvc_vio: constify vio_device_idArvind Yadav
vio_device_id are not supposed to change at runtime. All functions working with vio_device_id provided by <asm/vio.h> work with const vio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-24x86/lguest: Remove lguest supportJuergen Gross
Lguest seems to be rather unused these days. It has seen only patches ensuring it still builds the last two years and its official state is "Odd Fixes". Remove it in order to be able to clean up the paravirt code. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: boris.ostrovsky@oracle.com Cc: lguest@lists.ozlabs.org Cc: rusty@rustcorp.com.au Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20170816173157.8633-3-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-31powerpc/udbg: Reduce the footgun potential of EARLY_DEBUG_LPAR(_HVSI)Michael Ellerman
For debugging very early boot problems we have CONFIG_PPC_EARLY_DEBUG, which allows configuring the kernel such that it unconditionally writes to a particular type of console, regardless of whether that console exists or not. This is useful sometimes when the kernel crashes before it can even determine what platform it's on, and therefore what consoles exist. However if you boot a kernel built this way on a different platform, it will generally crash because it writes to a console that doesn't exist. A particularly nasty instance of this is if you enable the hypervisor console early debug, and then boot that kernel on bare metal. The result is that the kernel calls "the hypervisor" very early in boot, but the kernel *is* the hypervisor, so we jump to the system call handler and start executing all sorts of code that isn't ready to be run. This may lead to a machine check or check stop depending on how lucky you are. Luckily there is an easy way to avoid this particular case. We simply read the MSR before installing the hooks, and if we see MSR_HV is set then we are the hypervisor and we definitely should not use the hypervisor console. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-30tty: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Jiri Slaby <jslaby@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-serial@vger.kernel.org Cc: sparclinux@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-03Merge tag 'driver-core-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core update for 4.13-rc1. The large majority of this is a lot of cleanup of old fields in the driver core structures and their remaining usages in random drivers. All of those fixes have been reviewed by the various subsystem maintainers. There's also some small firmware updates in here, a new kobject uevent api interface that makes userspace interaction easier, and a few other minor things. All of these have been in linux-next for a long while with no reported issues" * tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (56 commits) arm: mach-rpc: ecard: fix build error zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO() driver-core: remove struct bus_type.dev_attrs powerpc: vio_cmo: use dev_groups and not dev_attrs for bus_type powerpc: vio: use dev_groups and not dev_attrs for bus_type USB: usbip: convert to use DRIVER_ATTR_RW s390: drivers: convert to use DRIVER_ATTR_RO/WO platform: thinkpad_acpi: convert to use DRIVER_ATTR_RO/RW pcmcia: ds: convert to use DRIVER_ATTR_RO wireless: ipw2x00: convert to use DRIVER_ATTR_RW net: ehea: convert to use DRIVER_ATTR_RO net: caif: convert to use DRIVER_ATTR_RO TTY: hvc: convert to use DRIVER_ATTR_RW PCI: pci-driver: convert to use DRIVER_ATTR_WO IB: nes: convert to use DRIVER_ATTR_RW HID: hid-core: convert to use DRIVER_ATTR_RO and drv_groups arm: ecard: fix dev_groups patch typo tty: serdev: use dev_groups and not dev_attrs for bus_type sparc: vio: use dev_groups and not dev_attrs for bus_type hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_type ...
2017-07-03Merge tag 'tty-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the large tty/serial patchset for 4.13-rc1. A lot of tty and serial driver updates are in here, along with some fixups for some __get/put_user usages that were reported. Nothing huge, just lots of development by a number of different developers, full details in the shortlog. All of these have been in linux-next for a while" * tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits) tty: serial: lpuart: add a more accurate baud rate calculation method tty: serial: lpuart: add earlycon support for imx7ulp tty: serial: lpuart: add imx7ulp support dt-bindings: serial: fsl-lpuart: add i.MX7ULP support tty: serial: lpuart: add little endian 32 bit register support tty: serial: lpuart: refactor lpuart32_{read|write} prototype tty: serial: lpuart: introduce lpuart_soc_data to represent SoC property serial: imx-serial - move DMA buffer configuration to DT serial: imx: Enable RTSD only when needed serial: imx: Remove unused members from imx_port struct serial: 8250: 8250_omap: Fix race b/w dma completion and RX timeout serial: 8250: Fix THRE flag usage for CAP_MINI tty/serial: meson_uart: update to stable bindings dt-bindings: serial: Add bindings for the Amlogic Meson UARTs serial: Delete dead code for CIR serial ports serial: sirf: make of_device_ids const serial/mpsc: switch to dma_alloc_attrs tty: serial: Add Actions Semi Owl UART earlycon dt-bindings: serial: Document Actions Semi Owl UARTs tty/serial: atmel: make the driver DT only ...
2017-06-12s390/hvc_iucv: fix broken Kconfig select statementHeiko Carstens
Select statements in Kconfig do not necessarily enable all required dependencies and can lead to broken configs. This is also the case for the "select IUCV" statement within HVC_IUCV: warning: (HVC_IUCV) selects IUCV which has unmet direct dependencies (NET && S390) Just add the missing "depends on NET" to avoid broken configs. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-06-12TTY: hvc: convert to use DRIVER_ATTR_RWGreg Kroah-Hartman
We are trying to get rid of DRIVER_ATTR(), and the hvc driver's attribute can be trivially changed to use DRIVER_ATTR_RW(). Cc: Jiri Slaby <jslaby@suse.com> Cc: <linuxppc-dev@lists.ozlabs.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18drivers/tty/hvc: fix spelling mistake: "missmanaged" -> "mismanaged"Colin Ian King
Trivial fix to spelling mistake in printk message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31tty/hvc_console: fix console lock ordering with spinlockDenis Kirjanov
hvc_remove() takes a spin lock first then acquires the console semaphore. This situation can easily lead to a deadlock scenario where we call scheduler with spin lock held. Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17drivers/tty: Convert remaining uses of pr_warning to pr_warnJoe Perches
To enable eventual removal of pr_warning This makes pr_warn use consistent for drivers/tty Prior to this patch, there were 2 uses of pr_warning and 23 uses of pr_warn in drivers/tty Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10tty: Remove extra include in HVC console tty frameworkSergio Valverde
An extra "init.h" include is found in the HVC console code. As such, the extra line is deleted. Signed-off-by: Sergio Valverde <vlvrdv@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27tty/hvc: Use opal irqchip interface if availableSam Mendoza-Jonas
Update the hvc driver to use the OPAL irqchip if made available by the running firmware. If it is not present, the driver falls back to the existing OPAL event number. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-27tty/hvc: Use IRQF_SHARED for OPAL hvc consolesSam Mendoza-Jonas
Commit 2def86a7200c ("hvc: Convert to using interrupts instead of opal events") enabled the use of interrupts in the hvc_driver for OPAL platforms. However on machines with more than one hvc console, any console after the first will fail to register an interrupt handler in notifier_add_irq() since all consoles share the same IRQ number but do not set the IRQF_SHARED flag: genirq: Flags mismatch irq 31. 00000000 (hvc_console) vs. 00000000 (hvc_console) hvc_open: request_irq failed with rc -16. This error propagates up to hvc_open() and the console is closed, but OPAL will still generate interrupts that are not handled, leading to rcu_sched stall warnings. Set IRQF_SHARED when calling request_irq(), allowing additional consoles to start properly. This is only set for consoles handled by hvc_opal_probe(), leaving other types unaffected. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-09 02:50:04 +0000