| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit a052b5118f13febac1bd901fe0b7a807b9d6b51c ]
Fix the following make W=1 kernel build warning:
drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8946187ab57ffd02088e50256c73dd31f49db06d ]
The fixed value of 157 used in the calculations are only correct for
M3-W, on other Gen3 SoC it should be 167. The constant can be derived
correctly from the static TJ_3 constant and the SoC specific TJ_1 value.
Update the calculation be correct on all Gen3 SoCs.
Fixes: 4eb39f79ef44 ("thermal: rcar_gen3_thermal: Update value of Tj_1")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210605085211.564909-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fe6a6de6692e7f7159c1ff42b07ecd737df712b4 upstream.
The following fixes are done for tcc sysfs interface:
- TCC is 6 bits only from bit 29-24
- TCC of 0 is valid
- When BIT(31) is set, this register is read only
- Check for invalid tcc value
- Error for negative values
Fixes: fdf4f2fb8e899 ("drivers: thermal: processor_thermal_device: Export sysfs interface for TCC offset")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210628215803.75038-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb8500b874cf295971a6a2a04e14eb0854197a3c upstream.
After commit 81ad4276b505 ("Thermal: Ignore invalid trip points") all
user_space governor notifications via RW trip point is broken in intel
thermal drivers. This commits marks trip_points with value of 0 during
call to thermal_zone_device_register() as invalid. RW trip points can be
0 as user space will set the correct trip temperature later.
During driver init, x86_package_temp and all int340x drivers sets RW trip
temperature as 0. This results in all these trips marked as invalid by
the thermal core.
To fix this initialize RW trips to THERMAL_TEMP_INVALID instead of 0.
Cc: <stable@vger.kernel.org>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210430122343.1789899-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fef05776eb02238dcad8d5514e666a42572c3f32 upstream.
The tz->lock must be hold during the looping over the instances in that
thermal zone. This lock was missing in the governor code since the
beginning, so it's hard to point into a particular commit.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210422153624.6074-2-lukasz.luba@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 45c7eaeb29d67224db4ba935deb575586a1fda09 ]
When kcalloc() returns NULL to __tcbp or of_count_phandle_with_args()
returns zero or -ENOENT to count, no error return code of
thermal_of_populate_bind_params() is assigned.
To fix these bugs, ret is assigned with -ENOMEM and -ENOENT in these
cases, respectively.
Fixes: a92bab8919e3 ("of: thermal: Allow multiple devices to share cooling map")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210310122423.3266-1-baijiaju1990@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2046a24ae121cd107929655a6aaf3b8c5beea01f ]
There is a possible chance that some cooling device stats buffer
allocation fails due to very high cooling device max state value.
Later cooling device update sysfs can try to access stats data
for the same cooling device. It will lead to NULL pointer
dereference issue.
Add a NULL pointer check before accessing thermal cooling device
stats data. It fixes the following bug
[ 26.812833] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
[ 27.122960] Call trace:
[ 27.122963] do_raw_spin_lock+0x18/0xe8
[ 27.122966] _raw_spin_lock+0x24/0x30
[ 27.128157] thermal_cooling_device_stats_update+0x24/0x98
[ 27.128162] cur_state_store+0x88/0xb8
[ 27.128166] dev_attr_store+0x40/0x58
[ 27.128169] sysfs_kf_write+0x50/0x68
[ 27.133358] kernfs_fop_write+0x12c/0x1c8
[ 27.133362] __vfs_write+0x54/0x160
[ 27.152297] vfs_write+0xcc/0x188
[ 27.157132] ksys_write+0x78/0x108
[ 27.162050] ksys_write+0xf8/0x108
[ 27.166968] __arm_smccc_hvc+0x158/0x4b0
[ 27.166973] __arm_smccc_hvc+0x9c/0x4b0
[ 27.186005] el0_svc+0x8/0xc
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1607367181-24589-1-git-send-email-manafm@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 236761f19a4f373354f1dcf399b57753f1f4b871 upstream.
If state has not changed successfully and we updated cpufreq_state,
next time when the new state is equal to cpufreq_state (not changed
successfully last time), we will return directly and miss a
freq_qos_update_request() that should have been.
Fixes: 5130802ddbb1 ("thermal: cpu_cooling: Switch to QoS requests for freq limits")
Cc: v5.4+ <stable@vger.kernel.org> # v5.4+
Signed-off-by: Zhuguangqing <zhuguangqing@xiaomi.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201106092243.15574-1-zhuguangqing83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 39056e8a989ef52486e063e34b4822b341e47b0e ]
If the common register memory resource is not available the driver needs
to fail gracefully to disable PM. Instead of returning the error
directly store it in ret and use the already existing error path.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200310114709.1483860-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ffdab6f2dea9e23ec33230de24e492ff0b186d9 ]
Currently driver is suppressing the negative temperature
readings from the vadc. Consumers of the thermal zones need
to read the negative temperature too. Don't suppress the
readings.
Fixes: c610afaa21d3c6e ("thermal: Add QPNP PMIC temperature alarm driver")
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/944856eb819081268fab783236a916257de120e4.1596040416.git.gurus@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 30d24faba0532d6972df79a1bf060601994b5873 ]
We can sometimes get bogus thermal shutdowns on omap4430 at least with
droid4 running idle with a battery charger connected:
thermal thermal_zone0: critical temperature reached (143 C), shutting down
Dumping out the register values shows we can occasionally get a 0x7f value
that is outside the TRM listed values in the ADC conversion table. And then
we get a normal value when reading again after that. Reading the register
multiple times does not seem help avoiding the bogus values as they stay
until the next sample is ready.
Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we
should have values from 13 to 107 listed with a total of 95 values. But
looking at the omap4430_adc_to_temp array, the values are off, and the
end values are missing. And it seems that the 4430 ADC table is similar
to omap3630 rather than omap4460.
Let's fix the issue by using values based on the omap3630 table and just
ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has
the missing values added while the TRM table only shows every second
value.
Note that sometimes the ADC register values within the valid table can
also be way off for about 1 out of 10 values. But it seems that those
just show about 25 C too low values rather than too high values. So those
do not cause a bogus thermal shutdown.
Fixes: 1a31270e54d7 ("staging: omap-thermal: add OMAP4 data structures")
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0f348db01fdf128813fdd659fcc339038fb421a4 ]
This condition is reversed and will cause breakage.
Fixes: 7440f518dad9 ("thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200616091949.GA11940@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 371a3bc79c11b707d7a1b7a2c938dc3cc042fffb upstream.
The function cpu_power_to_freq is used to find a frequency and set the
cooling device to consume at most the power to be converted. For example,
if the power to be converted is 80mW, and the em table is as follow.
struct em_cap_state table[] = {
/* KHz mW */
{ 1008000, 36, 0 },
{ 1200000, 49, 0 },
{ 1296000, 59, 0 },
{ 1416000, 72, 0 },
{ 1512000, 86, 0 },
};
The target frequency should be 1416000KHz, not 1512000KHz.
Fixes: 349d39dc5739 ("thermal: cpu_cooling: merge frequency and power tables")
Cc: <stable@vger.kernel.org> # v4.13+
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200619090825.32747-1-finley.xiao@rock-chips.com
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f3d7fb38976b1b0a8462ba1c7cbd404ddfaad086 upstream.
Downgrade "Unsupported event" message from dev_err to dev_dbg to avoid
flooding with this message on some platforms.
Cc: stable@vger.kernel.org # v5.4+
Suggested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Alex Hung <alex.hung@canonical.com>
[ rzhang: fix typo in changelog ]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20200615223957.183153-1-alex.hung@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a8f62f183021be389561570ab5f8c701a5e70298 ]
This reverts commit eb9aecd90d1a39601e91cd08b90d5fee51d321a6
The above patch is supposed to fix a register index error on mt2701. It
is not clear if the problem solved is a hang or just an invalid value
returned, my guess is the second. The patch introduces, though, a new
hang on MT8173 device making them unusable. So, seems reasonable, revert
the patch because introduces a worst issue.
The reason I send a revert instead of trying to fix the issue for MT8173
is because the information needed to fix the issue is in the datasheet
and is not public. So I am not really able to fix it.
Fixes the following bug when CONFIG_MTK_THERMAL is set on MT8173
devices.
[ 2.222488] Unable to handle kernel paging request at virtual address ffff8000125f5001
[ 2.230421] Mem abort info:
[ 2.233207] ESR = 0x96000021
[ 2.236261] EC = 0x25: DABT (current EL), IL = 32 bits
[ 2.241571] SET = 0, FnV = 0
[ 2.244623] EA = 0, S1PTW = 0
[ 2.247762] Data abort info:
[ 2.250640] ISV = 0, ISS = 0x00000021
[ 2.254473] CM = 0, WnR = 0
[ 2.257544] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041850000
[ 2.264251] [ffff8000125f5001] pgd=000000013ffff003, pud=000000013fffe003, pmd=000000013fff9003, pte=006800001100b707
[ 2.274867] Internal error: Oops: 96000021 [#1] PREEMPT SMP
[ 2.280432] Modules linked in:
[ 2.283483] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc6+ #162
[ 2.289914] Hardware name: Google Elm (DT)
[ 2.294003] pstate: 20000005 (nzCv daif -PAN -UAO)
[ 2.298792] pc : mtk_read_temp+0xb8/0x1c8
[ 2.302793] lr : mtk_read_temp+0x7c/0x1c8
[ 2.306794] sp : ffff80001003b930
[ 2.310100] x29: ffff80001003b930 x28: 0000000000000000
[ 2.315404] x27: 0000000000000002 x26: ffff0000f9550b10
[ 2.320709] x25: ffff0000f9550a80 x24: 0000000000000090
[ 2.326014] x23: ffff80001003ba24 x22: 00000000610344c0
[ 2.331318] x21: 0000000000002710 x20: 00000000000001f4
[ 2.336622] x19: 0000000000030d40 x18: ffff800011742ec0
[ 2.341926] x17: 0000000000000001 x16: 0000000000000001
[ 2.347230] x15: ffffffffffffffff x14: ffffff0000000000
[ 2.352535] x13: ffffffffffffffff x12: 0000000000000028
[ 2.357839] x11: 0000000000000003 x10: ffff800011295ec8
[ 2.363143] x9 : 000000000000291b x8 : 0000000000000002
[ 2.368447] x7 : 00000000000000a8 x6 : 0000000000000004
[ 2.373751] x5 : 0000000000000000 x4 : ffff800011295cb0
[ 2.379055] x3 : 0000000000000002 x2 : ffff8000125f5001
[ 2.384359] x1 : 0000000000000001 x0 : ffff0000f9550a80
[ 2.389665] Call trace:
[ 2.392105] mtk_read_temp+0xb8/0x1c8
[ 2.395760] of_thermal_get_temp+0x2c/0x40
[ 2.399849] thermal_zone_get_temp+0x78/0x160
[ 2.404198] thermal_zone_device_update.part.0+0x3c/0x1f8
[ 2.409589] thermal_zone_device_update+0x34/0x48
[ 2.414286] of_thermal_set_mode+0x58/0x88
[ 2.418375] thermal_zone_of_sensor_register+0x1a8/0x1d8
[ 2.423679] devm_thermal_zone_of_sensor_register+0x64/0xb0
[ 2.429242] mtk_thermal_probe+0x690/0x7d0
[ 2.433333] platform_drv_probe+0x5c/0xb0
[ 2.437335] really_probe+0xe4/0x448
[ 2.440901] driver_probe_device+0xe8/0x140
[ 2.445077] device_driver_attach+0x7c/0x88
[ 2.449252] __driver_attach+0xac/0x178
[ 2.453082] bus_for_each_dev+0x78/0xc8
[ 2.456909] driver_attach+0x2c/0x38
[ 2.460476] bus_add_driver+0x14c/0x230
[ 2.464304] driver_register+0x6c/0x128
[ 2.468131] __platform_driver_register+0x50/0x60
[ 2.472831] mtk_thermal_driver_init+0x24/0x30
[ 2.477268] do_one_initcall+0x50/0x298
[ 2.481098] kernel_init_freeable+0x1ec/0x264
[ 2.485450] kernel_init+0x1c/0x110
[ 2.488931] ret_from_fork+0x10/0x1c
[ 2.492502] Code: f9401081 f9400402 b8a67821 8b010042 (b9400042)
[ 2.498599] ---[ end trace e43e3105ed27dc99 ]---
[ 2.503367] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 2.511020] SMP: stopping secondary CPUs
[ 2.514941] Kernel Offset: disabled
[ 2.518421] CPU features: 0x090002,25006005
[ 2.522595] Memory Limit: none
[ 2.525644] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--
Cc: Michael Kao <michael.kao@mediatek.com>
Fixes: eb9aecd90d1a ("thermal: mediatek: fix register index error")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200707103412.1010823-1-enric.balletbo@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b45fd13be340e4ed0a2a9673ba299eb2a71ba829 ]
After finishing using cpu node got from of_get_cpu_node(), of_node_put()
needs to be called.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1585232945-23368-1-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f8f06425a0dcdad7bedbb77e67f5c65ab4dacfc ]
As description for DIV_ROUND_CLOSEST in file include/linux/kernel.h.
"Result is undefined for negative divisors if the dividend variable
type is unsigned and for negative dividends if the divisor variable
type is unsigned."
In current code, the FIXPT_DIV uses DIV_ROUND_CLOSEST but has not
checked sign of divisor before using. It makes undefined temperature
value in case the value is negative.
This patch fixes to satisfy DIV_ROUND_CLOSEST description
and fix bug too. Note that the variable name "reg" is not good
because it should be the same type as rcar_gen3_thermal_read().
However, it's better to rename the "reg" in a further patch as
cleanup.
Signed-off-by: Van Do <van.do.xw@renesas.com>
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
[shimoda: minor fixes, add Fixes tag]
Fixes: 564e73d283af ("thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Soderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Soderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1593085099-2057-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 14533a5a6c12e8d7de79d309d4085bf186058fe1 ]
MT8183_NUM_ZONES should be set to 1
because MT8183 doesn't have multiple banks.
Fixes: a4ffe6b52d27 ("thermal: mediatek: add support for MT8183")
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200323121537.22697-6-michael.kao@mediatek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7440f518dad9d861d76c64956641eeddd3586f75 ]
On error the function ti_bandgap_get_sensor_data() returns the error
code in ERR_PTR() but we only checked if the return value is NULL or
not. And, so we can dereference an error code inside ERR_PTR.
While at it, convert a check to IS_ERR_OR_NULL.
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200424161944.6044-1-sudipm.mukherjee@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e1ff6fc22f19e2af8adbad618526b80067911d40 upstream.
At the time the brcmstb_thermal driver and its binding were merged, the
DT binding did not make the coefficients properties a mandatory one,
therefore all users of the brcmstb_thermal driver out there have a non
functional implementation with zero coefficients. Even if these
properties were provided, the formula used for computation is incorrect.
The coefficients are entirely process specific (right now, only 28nm is
supported) and not board or SoC specific, it is therefore appropriate to
hard code them in the driver given the compatibility string we are
probed with which has to be updated whenever a new process is
introduced.
We remove the existing coefficients definition since subsequent patches
are going to add support for a new process and will introduce new
coefficients as well.
Fixes: 9e03cf1b2dd5 ("thermal: add brcmstb AVS TMON driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200114190607.29339-2-f.fainelli@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c56dcfa3d4d0f49f0c37cd24886aa86db7aa7f30 upstream.
We are not interested in getting this debug print on our
console all the time.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Fixes: 6c375eccded4 ("thermal: db8500: Rewrite to be a pure OF sensor")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191119074650.2664-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 163b00cde7cf2206e248789d2780121ad5e6a70b upstream.
1851799e1d29 ("thermal: Fix use-after-free when unregistering thermal zone
device") changed cancel_delayed_work to cancel_delayed_work_sync to avoid
a use-after-free issue. However, cancel_delayed_work_sync could be called
insides the WQ causing deadlock.
[54109.642398] c0 1162 kworker/u17:1 D 0 11030 2 0x00000000
[54109.642437] c0 1162 Workqueue: thermal_passive_wq thermal_zone_device_check
[54109.642447] c0 1162 Call trace:
[54109.642456] c0 1162 __switch_to+0x138/0x158
[54109.642467] c0 1162 __schedule+0xba4/0x1434
[54109.642480] c0 1162 schedule_timeout+0xa0/0xb28
[54109.642492] c0 1162 wait_for_common+0x138/0x2e8
[54109.642511] c0 1162 flush_work+0x348/0x40c
[54109.642522] c0 1162 __cancel_work_timer+0x180/0x218
[54109.642544] c0 1162 handle_thermal_trip+0x2c4/0x5a4
[54109.642553] c0 1162 thermal_zone_device_update+0x1b4/0x25c
[54109.642563] c0 1162 thermal_zone_device_check+0x18/0x24
[54109.642574] c0 1162 process_one_work+0x3cc/0x69c
[54109.642583] c0 1162 worker_thread+0x49c/0x7c0
[54109.642593] c0 1162 kthread+0x17c/0x1b0
[54109.642602] c0 1162 ret_from_fork+0x10/0x18
[54109.643051] c0 1162 kworker/u17:2 D 0 16245 2 0x00000000
[54109.643067] c0 1162 Workqueue: thermal_passive_wq thermal_zone_device_check
[54109.643077] c0 1162 Call trace:
[54109.643085] c0 1162 __switch_to+0x138/0x158
[54109.643095] c0 1162 __schedule+0xba4/0x1434
[54109.643104] c0 1162 schedule_timeout+0xa0/0xb28
[54109.643114] c0 1162 wait_for_common+0x138/0x2e8
[54109.643122] c0 1162 flush_work+0x348/0x40c
[54109.643131] c0 1162 __cancel_work_timer+0x180/0x218
[54109.643141] c0 1162 handle_thermal_trip+0x2c4/0x5a4
[54109.643150] c0 1162 thermal_zone_device_update+0x1b4/0x25c
[54109.643159] c0 1162 thermal_zone_device_check+0x18/0x24
[54109.643167] c0 1162 process_one_work+0x3cc/0x69c
[54109.643177] c0 1162 worker_thread+0x49c/0x7c0
[54109.643186] c0 1162 kthread+0x17c/0x1b0
[54109.643195] c0 1162 ret_from_fork+0x10/0x18
[54109.644500] c0 1162 cat D 0 7766 1 0x00000001
[54109.644515] c0 1162 Call trace:
[54109.644524] c0 1162 __switch_to+0x138/0x158
[54109.644536] c0 1162 __schedule+0xba4/0x1434
[54109.644546] c0 1162 schedule_preempt_disabled+0x80/0xb0
[54109.644555] c0 1162 __mutex_lock+0x3a8/0x7f0
[54109.644563] c0 1162 __mutex_lock_slowpath+0x14/0x20
[54109.644575] c0 1162 thermal_zone_get_temp+0x84/0x360
[54109.644586] c0 1162 temp_show+0x30/0x78
[54109.644609] c0 1162 dev_attr_show+0x5c/0xf0
[54109.644628] c0 1162 sysfs_kf_seq_show+0xcc/0x1a4
[54109.644636] c0 1162 kernfs_seq_show+0x48/0x88
[54109.644656] c0 1162 seq_read+0x1f4/0x73c
[54109.644664] c0 1162 kernfs_fop_read+0x84/0x318
[54109.644683] c0 1162 __vfs_read+0x50/0x1bc
[54109.644692] c0 1162 vfs_read+0xa4/0x140
[54109.644701] c0 1162 SyS_read+0xbc/0x144
[54109.644708] c0 1162 el0_svc_naked+0x34/0x38
[54109.845800] c0 1162 D 720.000s 1->7766->7766 cat [panic]
Fixes: 1851799e1d29 ("thermal: Fix use-after-free when unregistering thermal zone device")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Wang <wvw@google.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the CPU device PM QoS used for the management of min and max
frequency constraints in cpufreq (and its users) with per-policy
frequency QoS to avoid problems with cpufreq policies covering
more then one CPU.
Namely, a cpufreq driver is registered with the subsys interface
which calls cpufreq_add_dev() for each CPU, starting from CPU0, so
currently the PM QoS notifiers are added to the first CPU in the
policy (i.e. CPU0 in the majority of cases).
In turn, when the cpufreq driver is unregistered, the subsys interface
doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0,
and the PM QoS notifiers are only removed when cpufreq_remove_dev() is
called for the last CPU in the policy, say CPUx, which as a rule is
not CPU0 if the policy covers more than one CPU. Then, the PM QoS
notifiers cannot be removed, because CPUx does not have them, and
they are still there in the device PM QoS notifiers list of CPU0,
which prevents new PM QoS notifiers from being registered for CPU0
on the next attempt to register the cpufreq driver.
The same issue occurs when the first CPU in the policy goes offline
before unregistering the driver.
After this change it does not matter which CPU is the policy CPU at
the driver registration time and whether or not it is online all the
time, because the frequency QoS is per policy and not per CPU.
Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Diagnosed-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f
Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29b
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal SoC updates from Eduardo Valentin:
"This is a really small pull in the midst of a lot of pending patches.
We are in the middle of restructuring how we are maintaining the
thermal subsystem, as per discussion in our last LPC. For now, I am
sending just some changes that were pending in my tree. Looking
forward to get a more streamlined process in the next merge window"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: db8500: Rewrite to be a pure OF sensor
thermal: db8500: Use dev helper variable
thermal: db8500: Finalize device tree conversion
thermal: thermal_mmio: remove some dead code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
- Add Amit Kucheria as thermal subsystem Reviewer (Amit Kucheria)
- Fix a use after free bug when unregistering thermal zone devices (Ido
Schimmel)
- Fix thermal core framework to use put_device() when device_register()
fails (Yue Hu)
- Enable intel_pch_thermal and MMIO RAPL support for Intel Icelake
platform (Srinivas Pandruvada)
- Add clock operations in qorip thermal driver, for some platforms with
clock control like i.MX8MQ (Anson Huang)
- A couple of trivial fixes and cleanups for thermal core and different
soc thermal drivers (Amit Kucheria, Christophe JAILLET, Chuhong Yuan,
Fuqian Huang, Kelsey Skunberg, Nathan Huckleberry, Rishi Gupta,
Srinivas Kandagatla)
* 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
MAINTAINERS: Add Amit Kucheria as reviewer for thermal
thermal: Add some error messages
thermal: Fix use-after-free when unregistering thermal zone device
thermal/drivers/core: Use put_device() if device_register() fails
thermal_hwmon: Sanitize thermal_zone type
thermal: intel: Use dev_get_drvdata
thermal: intel: int3403: replace printk(KERN_WARN...) with pr_warn(...)
thermal: intel: int340x_thermal: Remove unnecessary acpi_has_method() uses
thermal: int340x: processor_thermal: Add Ice Lake support
drivers: thermal: qcom: tsens: Fix memory leak from qfprom read
thermal: tegra: Fix a typo
thermal: rcar_gen3_thermal: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()
thermal: armada: Fix -Wshift-negative-value
dt-bindings: thermal: qoriq: Add optional clocks property
thermal: qoriq: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
thermal: qoriq: Use devm_platform_ioremap_resource() instead of of_iomap()
thermal: qoriq: Fix error path of calling qoriq_tmu_register_tmu_zone fail
thermal: qoriq: Add clock operations
drivers: thermal: processor_thermal_device: Export sysfs interface for TCC offset
|
|
This patch rewrites the DB8500 thermal sensor to be a
pure OF sensor, so that it can be used with thermal zones
defined in the device tree.
This driver was initially merged before we had generic
thermal zone device tree bindings, and now it gets
modernized to the way we do things these days.
The old driver depended on a set of trigger points
provided in the device tree or platform data to
interpolate the current temperature between trigger
points depending on whether the trend was rising or
falling. This was bad because the trigger points should
be used for defining temperature zone policies and
bind to cooling devices.
As the PRCMU (power reset control management unit) can
only issue IRQs when we pass temperature trigger points
upward or downward We instead define a number of
temperature points inside the driver ranging from
15 to 100 degrees celsius. The effect is that when
we register the device we quickly trigger 15, 20 ... up
to the room temperature in succession and then we
get continous event IRQs also under normal operating
conditions, and the temperature of the system is now
reported more accurately (+/- 2.5 degrees celsius)
while in the past the first trigger point was at 70
degrees and the average temperature was simply reported
as 35 degrees celsius (between 70 degrees and 0) until
we passed 70 degrees which didn't accurately represent
the temperature of the system.
As a result of dropping all the trigger points from the
driver and reusing the core DT thermal zone management
code we reduce the code footprint quite a bit.
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
The code gets easier to read like this.
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
At some point there was an attempt to convert the DB8500
thermal sensor to device tree: a probe path was added
and the device tree was augmented for the Snowball board.
The switchover was never completed: instead the thermal
devices came from from the PRCMU MFD device and the probe
on the Snowball was confused as another set of configuration
appeared from the device tree.
Move over to a device-tree only approach, as we fixed up
the device trees.
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
|
|
When registering a thermal zone device, we currently return -EINVAL in
four cases. This makes it a little hard to debug the real cause of the
failure.
Print some error messages to make it easier for developer to figure out
what happened.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
thermal_zone_device_unregister() cancels the delayed work that polls the
thermal zone, but it does not wait for it to finish. This is racy with
respect to the freeing of the thermal zone device, which can result in a
use-after-free [1].
Fix this by waiting for the delayed work to finish before freeing the
thermal zone device. Note that thermal_zone_device_set_polling() is
never invoked from an atomic context, so it is safe to call
cancel_delayed_work_sync() that can block.
[1]
[ +0.002221] ==================================================================
[ +0.000064] BUG: KASAN: use-after-free in __mutex_lock+0x1076/0x11c0
[ +0.000016] Read of size 8 at addr ffff8881e48e0450 by task kworker/1:0/17
[ +0.000023] CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.2.0-rc6-custom-02495-g8e73ca3be4af #1701
[ +0.000010] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[ +0.000016] Workqueue: events_freezable_power_ thermal_zone_device_check
[ +0.000012] Call Trace:
[ +0.000021] dump_stack+0xa9/0x10e
[ +0.000020] print_address_description.cold.2+0x9/0x25e
[ +0.000018] __kasan_report.cold.3+0x78/0x9d
[ +0.000016] kasan_report+0xe/0x20
[ +0.000016] __mutex_lock+0x1076/0x11c0
[ +0.000014] step_wise_throttle+0x72/0x150
[ +0.000018] handle_thermal_trip+0x167/0x760
[ +0.000019] thermal_zone_device_update+0x19e/0x5f0
[ +0.000019] process_one_work+0x969/0x16f0
[ +0.000017] worker_thread+0x91/0xc40
[ +0.000014] kthread+0x33d/0x400
[ +0.000015] ret_from_fork+0x3a/0x50
[ +0.000020] Allocated by task 1:
[ +0.000015] save_stack+0x19/0x80
[ +0.000015] __kasan_kmalloc.constprop.4+0xc1/0xd0
[ +0.000014] kmem_cache_alloc_trace+0x152/0x320
[ +0.000015] thermal_zone_device_register+0x1b4/0x13a0
[ +0.000015] mlxsw_thermal_init+0xc92/0x23d0
[ +0.000014] __mlxsw_core_bus_device_register+0x659/0x11b0
[ +0.000013] mlxsw_core_bus_device_register+0x3d/0x90
[ +0.000013] mlxsw_pci_probe+0x355/0x4b0
[ +0.000014] local_pci_probe+0xc3/0x150
[ +0.000013] pci_device_probe+0x280/0x410
[ +0.000013] really_probe+0x26a/0xbb0
[ +0.000013] driver_probe_device+0x208/0x2e0
[ +0.000013] device_driver_attach+0xfe/0x140
[ +0.000013] __driver_attach+0x110/0x310
[ +0.000013] bus_for_each_dev+0x14b/0x1d0
[ +0.000013] driver_register+0x1c0/0x400
[ +0.000015] mlxsw_sp_module_init+0x5d/0xd3
[ +0.000014] do_one_initcall+0x239/0x4dd
[ +0.000013] kernel_init_freeable+0x42b/0x4e8
[ +0.000012] kernel_init+0x11/0x18b
[ +0.000013] ret_from_fork+0x3a/0x50
[ +0.000015] Freed by task 581:
[ +0.000013] save_stack+0x19/0x80
[ +0.000014] __kasan_slab_free+0x125/0x170
[ +0.000013] kfree+0xf3/0x310
[ +0.000013] thermal_release+0xc7/0xf0
[ +0.000014] device_release+0x77/0x200
[ +0.000014] kobject_put+0x1a8/0x4c0
[ +0.000014] device_unregister+0x38/0xc0
[ +0.000014] thermal_zone_device_unregister+0x54e/0x6a0
[ +0.000014] mlxsw_thermal_fini+0x184/0x35a
[ +0.000014] mlxsw_core_bus_device_unregister+0x10a/0x640
[ +0.000013] mlxsw_devlink_core_bus_device_reload+0x92/0x210
[ +0.000015] devlink_nl_cmd_reload+0x113/0x1f0
[ +0.000014] genl_family_rcv_msg+0x700/0xee0
[ +0.000013] genl_rcv_msg+0xca/0x170
[ +0.000013] netlink_rcv_skb+0x137/0x3a0
[ +0.000012] genl_rcv+0x29/0x40
[ +0.000013] netlink_unicast+0x49b/0x660
[ +0.000013] netlink_sendmsg+0x755/0xc90
[ +0.000013] __sys_sendto+0x3de/0x430
[ +0.000013] __x64_sys_sendto+0xe2/0x1b0
[ +0.000013] do_syscall_64+0xa4/0x4d0
[ +0.000013] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ +0.000017] The buggy address belongs to the object at ffff8881e48e0008
which belongs to the cache kmalloc-2k of size 2048
[ +0.000012] The buggy address is located 1096 bytes inside of
2048-byte region [ffff8881e48e0008, ffff8881e48e0808)
[ +0.000007] The buggy address belongs to the page:
[ +0.000012] page:ffffea0007923800 refcount:1 mapcount:0 mapping:ffff88823680d0c0 index:0x0 compound_mapcount: 0
[ +0.000020] flags: 0x200000000010200(slab|head)
[ +0.000019] raw: 0200000000010200 ffffea0007682008 ffffea00076ab808 ffff88823680d0c0
[ +0.000016] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[ +0.000007] page dumped because: kasan: bad access detected
[ +0.000012] Memory state around the buggy address:
[ +0.000012] ffff8881e48e0300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000012] ffff8881e48e0380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000012] >ffff8881e48e0400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000008] ^
[ +0.000012] ffff8881e48e0480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000012] ffff8881e48e0500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ==================================================================
Fixes: b1569e99c795 ("ACPI: move thermal trip handling to generic thermal layer")
Reported-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Never directly free @dev after calling device_register(), even if it
returned an error! Always use put_device() to give up the reference
initialized. Clean up the rollback block also.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
When calling thermal_add_hwmon_sysfs(), the device type is sanitized by
replacing '-' with '_'. However tz->type remains unsanitized. Thus
calling thermal_hwmon_lookup_by_type() returns no device. And if there is
no device, thermal_remove_hwmon_sysfs() fails with "hwmon device lookup
failed!".
The result is unregisted hwmon devices in the sysfs.
Fixes: 409ef0bacacf ("thermal_hwmon: Sanitize attribute name passed to hwmon")
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Direct invocation of printk() is not preferred to emit logs.
This commit replaces printk(KERN_WARNING) with corresponding
pr_warn() function call.
Signed-off-by: Rishi Gupta <gupt21@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
acpi_evaluate_object() will already return in error if the method does not
exist. Checking if the method is absent before the acpi_evaluate_object()
call is not needed. Remove acpi_has_method() calls to avoid additional
work.
Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Add new PCI id for Ice lake processor thermal device. Also enabled
the RAPL mmio interface. The MMIO offsets match Skylake.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
The platform_get_resource() function doesn't return error pointers, it
returns NULL. The way this is normally done, is that we pass the NULL
resource to devm_ioremap_resource() and then check for errors from that.
See the comment in front of devm_ioremap_resource() for more details.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Talel Shenhar <talel@amazon.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
* pm-cpufreq: (36 commits)
cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
cpufreq: qcom: Add support for qcs404 on nvmem driver
cpufreq: qcom: Refactor the driver to make it easier to extend
cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
Documentation: cpufreq: Update policy notifier documentation
cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
sched/cpufreq: Align trace event behavior of fast switching
ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier
video: pxafb: Remove cpufreq policy notifier
video: sa1100fb: Remove cpufreq policy notifier
arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY
cpufreq: powerpc_cbe: Switch to QoS requests for freq limits
cpufreq: powerpc: macintosh: Switch to QoS requests for freq limits
cpufreq: Print driver name if cpufreq_suspend() fails
cpufreq: mediatek: Add support for mt8183
cpufreq: mediatek: change to regulator_get_optional
cpufreq: imx-cpufreq-dt: Add i.MX8MN support
cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading
...
|
|
The play_idle resolution is 1ms. The intel_powerclamp bases the idle
duration on jiffies. The idle injection API is also using msec based
duration but has no user yet.
Unfortunately, msec based time does not fit well when we want to
inject idle cycle precisely with shallow idle state.
In order to set the scene for the incoming idle injection user, move
the precision up to usec when calling play_idle.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
memory returned as part of nvmem_read via qfprom_read should be
freed by the consumer once done.
Existing code is not doing it so fix it.
Below memory leak detected by kmemleak
[<ffffff80088b7658>] kmemleak_alloc+0x50/0x84
[<ffffff80081df120>] __kmalloc+0xe8/0x168
[<ffffff80086db350>] nvmem_cell_read+0x30/0x80
[<ffffff8008632790>] qfprom_read+0x4c/0x7c
[<ffffff80086335a4>] calibrate_v1+0x34/0x204
[<ffffff8008632518>] tsens_probe+0x164/0x258
[<ffffff80084e0a1c>] platform_drv_probe+0x80/0xa0
[<ffffff80084de4f4>] really_probe+0x208/0x248
[<ffffff80084de2c4>] driver_probe_device+0x98/0xc0
[<ffffff80084dec54>] __device_attach_driver+0x9c/0xac
[<ffffff80084dca74>] bus_for_each_drv+0x60/0x8c
[<ffffff80084de634>] __device_attach+0x8c/0x100
[<ffffff80084de6c8>] device_initial_probe+0x20/0x28
[<ffffff80084dcbb8>] bus_probe_device+0x34/0x7c
[<ffffff80084deb08>] deferred_probe_work_func+0x6c/0x98
[<ffffff80080c3da8>] process_one_work+0x160/0x2f8
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
s/sochterm/soctherm/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
action with devm_add_action_or_reset()
devm_add_action_or_reset() is introduced as a helper function which
internally calls devm_add_action(). If devm_add_action() fails
then it will execute the action mentioned and return the error code.
This reduce source code size (avoid writing the action twice)
and reduce the likelyhood of bugs.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Clang produces the following warning
drivers/thermal/armada_thermal.c:270:33: warning: shifting a negative
signed value is undefined [-Wshift-negative-value]
1 warning reg &= ~CONTROL1_TSEN_AVG_MASK <<
CONTROL1_TSEN_AVG_SHIFT; generated
.
~~~~~~~~~~~~~~~~~~~~~~~ ^
CONTROL1_TSEN_AVG_SHIFT is defined to be zero.
Since shifting by zero does nothing this variable can be removed.
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/532
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Use __maybe_unused for power management related functions
instead of #if CONFIG_PM_SLEEP to simply the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Use devm_platform_ioremap_resource() instead of of_iomap() to
save the iounmap() call in error handle path;
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
When registering tmu zone failed, the error path should be err_tmu
instead of err_iomap, as iounmap() needs to be called.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Some platforms like i.MX8MQ has clock control for this module,
need to add clock operations to make sure the driver is working
properly.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
offset
This change exports an interface to read tcc offset and allow writing if
the platform is not locked.
Refer to Intel SDM for details on the MSR: MSR_TEMPERATURE_TARGET.
Here TCC Activation Offset (R/W) bits allow temperature offset in degrees
in relation to TjMAX.
This change will be useful for improving performance from user space for
some platforms, if the current offset is not optimal.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
Yang Yingliang
Niklas Söderlund
Srinivas Pandruvada
Lukasz Luba
Jia-Ju Bai
Manaf Meethalavalappu Pallikunhi
Zhuguangqing
Veera Vegivada
Tony Lindgren
Dan Carpenter
Finley Xiao
Alex Hung
Enric Balletbo i Serra
Anson Huang
Dien Pham
Michael Kao
Sudip Mukherjee
Florian Fainelli
Linus Walleij
Wei Wang
Rafael J. Wysocki
Linus Torvalds
Zhang Rui
Amit Kucheria
Ido Schimmel
Yue Hu
Stefan Mavrodiev
Chuhong Yuan
Rishi Gupta
Kelsey Skunberg
Daniel Lezcano
Srinivas Kandagatla
Christophe JAILLET
Fuqian Huang
Nathan Huckleberry