| Age | Commit message (Collapse) | Author |
|---|
|
Refer to the MDK as GMP MDK.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Currently, AP performs unipro_reset if SVC fails to response to its
ping. While this error recovery is best suited for the end-user
experience, errors in the UniPro network could potentially go unnoticed
by the QA and fishfooders in the development phase of the project. This
patch adds an option to trigger a kernel panic so logs can be collected
for analysis.
Testing Done:
- Reproduce issue and observe kernel panic when
watchdob_control is changed to 'panic'
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Reword the power_state attribute documentation to make it clear that an
attempt to boot and possibly enumerate an interface is made when writing
"on" to the file, and that on errors the interface will again be powered
down.
Drop the incorrect claim that writing the currently read value has no
effect, since no such guarantees can be made (e.g. several writers may
be sleeping on the interface mutex).
Also fix some minor language issues.
Reviewed-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
User space needs the capability of powering ON or OFF an Interface for
multiple use cases. For example, userspace may want an Interface
currently in its S3 boot stage, to boot into its S2 Loader stage to
update the bridge SPI flash. Or the Interface is running its S2 Loader
stage and updated the SPI flash with the new S2 Loader firmware and
wants to boot into the new S2 Loader firmware.
Another use case can be, Android wants to disable (not eject) a
misbehaving module.
Add a 'power_state' sysfs file within the interface directory. It can be
read to know the current power state of the Interface and can be written
to power ON or power OFF an Interface. Possible values that can be
written or read from it are: "on" and "off".
Testing Done: Tested by enabling/disabling camera module on EVT 2.0.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
CC: David Lin <dtwlin@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
[johan: drop es3-quirk duplication, add to power attribute group, fix
return value, drop tags ]
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sandeep Patil <sspatil@google.com>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add an interface-type string attribute that represents the detected
interface type as either "dummy", "unipro", "greybus", or "unknown".
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sandeep Patil <sspatil@google.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Update the documentation (sysfs-bus-greybus) for recent conversion of
bridged-phy drivers to real drivers.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This reverts commit b957ade7b3e4ab8c149c53346dbf02e977b7f3a7.
The interface version is now managed as part of the firmware-management
protocol. This operation is already removed from the greybus
specifications.
Drop interface version support from greybus.
Tested with gbsim (sysfs file not available after this patch).
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Acked-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
correct sysfs paths typo. (s/device/devices).
Signed-off-by: Sandeep Patil <sspatil@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add description for greybus host device bus_id attribute
Signed-off-by: Sandeep Patil <sspatil@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Implement controlled module removal through a new module attribute
"eject".
When a non-zero argument is written to the attribute, all interfaces of
the module are disabled (e.g. bundles are deregistered) and deactivated
(e.g. powered off) before instructing the SVC to physically eject the
module.
Note that the module device is not deregistered until the SVC has
reported the physical removal of all of its interfaces.
A new interface mutex is added to enforce interface state-change
serialisation.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add Greybus module abstraction that will be used to implement controlled
module removal (eject) and represent module geometry.
Greybus module devices correspond to physical modules and have one or
more interfaces. Modules have an id that is identical to the id of their
primary interface, which in turn is the interface with lowest numbered
id. The module name is constructed from the bus and module id:
<bus_id>-<module_id>
Interfaces, bundles, and control devices are consequently renamed as
<bus_id>-<module_id>.<interface_id>
<bus_id>-<module_id>.<interface_id>.<bundle_id>
<bus_id>-<module_id>.<interface_id>.ctrl
As before, interface ids (and therefore in a sense now also module ids)
correspond to physical interface positions on the frame.
Modules have the following attributes:
module_id
num_interfaces
where module_id is the id of the module and num_interface the number of
interfaces the module has.
Note that until SVC module-size detection has been implemented, all
interfaces are considered to be part of 1x2 modules. Specifically, the
two interfaces of a 2x2 module will be presented as two 1x2 modules for
now.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
The attribute entries have been kept mostly sorted within each device
type. Let's move the three more-recently added interface attributes
that were not.
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add an entry for the recently added interface control device.
Also move the bundle-device entry below the control-device entries.
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
The control device is an abstraction of the control connection over
which a greybus manifest is retrieved. As interfaces switch modes (e.g.
after boot-over-unipro) they expose new manifests, which can contain
different vendor and product strings.
Eventually control devices will be deregistered and recreated after an
interface mode switch, while the interface itself remains registered.
Note that only interfaces of type greybus will have control devices.
Specifically, dummy interfaces will not.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Move the interface power attributes after the other interface attributes
to keep the attributes grouped by device type.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This change implements the AP Power Monitor functions for obtaining
current/voltage/power on a specific rail of an Interface.
Testing Done:
$ cat /sys/bus/greybus/devices/1-3/current_now
103
$ cat /sys/bus/greybus/devices/1-3/power_now
303
$ cat /sys/bus/greybus/devices/1-3/voltage_now
203
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Remove unimplemented svc unique_id attribute from the documentation.
This attribute made more sense when we thought we'd have an AP-module,
unlike now when the AP and SVC are both part of the same frame.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Sometimes you want to disable the SVC watchdog without having to patch
your kernel, so provide a sysfs file to do this. This can let us do
power measurements, and let the firmware developers not go crazy
worrying that the kernel is going to reset their chips with no notice.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add a new write-only svc attribute to send an eject request to the svc
giving the interface number.
So, doing:
echo 3 > /sys/bus/greybus/devices/1-svc/intf_eject
will force eject the module on interface 3 (module slot 1 on EVT1).
This can take some seconds as the pulse width for module release is
large.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
|
|
The version of the currently running firmware on the module is useful
for userspace as it can be used to find if an update is available or
not. This patch fetches interface's version with a new control operation
and exposes the same in userspace.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Two exactly same modules can be uniquely identified using module's
serial-number. This patch updates the interface hotplug event to also
receive the serial-number of the module.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
These ids are already fetched from the SVC, but were never exposed to
sysfs. Userspace may be interested in using these values and hence these
must be exposed to it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
The order of entries in sysfs-bus-greybus file doesn't match the order
files/directories in sysfs on a real board. More specifically, N-svc
comes at last and ap_interface_id comes before endo_id within the svc.
Fix that.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
endo_id was present in place of the directory N-svc, fix it.
Fixes: 4f7b1833e78f ("Documentation/sysfs-bus-greybus: update the bus ABI documentation")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add a bundle_id attribute for the interface-unique id of a bundle that
user space can use for matching.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Update the ABI documentation to match the new device model.
Note that the SVC unique_id and version attributes are not yet
implemented.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Remove the unimplemented interface unique-id.
There will eventually be an interface-serial-number attribute provided,
but let's not export it or commit to a name for this attribute until we
need it.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
We don't want this in the driver core, as nothing will be binding to it,
that's the job of a bundle. So remove the struct device and use a kref
to handle reference counting instead.
Note, I don't think we really need a kref, but it keeps the lifetime the
same as before, and is the simplest change for now. In the future it
might be easier to just attach all connections to the bundle and clean
them up when the bundle is removed.
Also remove the cport sysfs documentation as it's no longer relevant.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
|
|
The file names here weren't in sync with what we have today and the
updates give a better picture of the same.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Its a very useful piece of information, i.e. the cport id of the AP to
which the cport of the module is connected, and is required lots of
times. It isn't known in advance as it is allocated at runtime.
This patch creates another file 'ap_cport_id', only for the connection
directories, which will give the cport id of the AP.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
While introducing bundles, the device_id also got moved to the bundle,
whereas it identifies an interface block to the AP.
Move it back to interface instead of bundle.
Calls to gb_bundle(s)_init() are dropped as connections will be
initialized while they are created now, as device_id will be valid.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
With the Endo "id" attribute in place, there's no need to encode
the ID of an Endo in its sysfs path. So get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This commit:
7e761e2 endo: rework some attributes
added a new "endo_id" attribute, located under a new "Endo"
directory in sysfs. The resulting path looks like:
Documentation/sysfs/endo-TYPE/Endo/endo_id
There's no need to have a separate "Endo" subdirectory to contain
Endo-specific attributes.
That commit also added "svc_" to some other paths related to the
SVC, like:
Documentation/sysfs/endo-TYPE/SVC/svc_version
The additional "svc_" is redundant.
This patch retouches those paths a bit, mainly to remove some
redundancy. It also makes the pathname components all lower case.
As a result, the above two paths now look like:
Documentation/sysfs/endo-TYPE/id
Documentation/sysfs/endo-TYPE/svc/version
All other Endo sysfs files are updated similarly.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Impose a few editorial conventions on the Greybus-related sysfs
files under "Documentation".
- Capitalize "Endo" (except in path names)
- Capitalize "ID" (except in path names)
- Use "..." to indicate unspecified path components (because
".." means something else).
- Add the "0x" prior to the "XXXX" representing the Endo ID.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Update the files documenting Greybus-related sysfs files under
Documentation/ to reflect the addition of the two recently-added
Endo attributes.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
A bundle has a state file, that is managed by the endo userspace
process. This file can be written to and any process that is polling on
the file will be woken up and can read the new value. It's a "cheap"
IPC for programs that are not allowed to do anything other than
read/write to kernel sysfs files.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This documents the module slot sysfs files "epm", "power_control", and
"present".
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
|
|
This documents the endo device, and the SVC specific files that are
present in the sysfs device tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
|
|
The kernel is now on the 4.XX numbering scheme, and it's going to be a
while before we merge this code, so pick a date sometime in the future
to be safe.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
|
|
Rename struct gb_interface to struct gb_bundle
It's a lot of renaming, some structures got renamed and also some
fields, but the goal was to rename things to make sense with the new
naming of how the system is put together in the 'driver model' view.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
|
|
Yes, an interface has a device id sysfs file, so we need to document it.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
|
|
Document what the sysfs files are for connections, so that people have a
chance to understand what they can be used for.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
|
|
Documentation, what, really?
Yes.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
|
Johan Hovold
David Lin
Viresh Kumar
Vaibhav Hiremath
Sandeep Patil
Greg Kroah-Hartman
Rui Miguel Silva
Alex Elder
Greg Kroah-Hartman