aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2020-10-29scsi: ufs: ufs-qcom: Fix race conditions caused by ufs_qcom_testbus_config()Can Guo
[ Upstream commit 89dd87acd40a44de8ff3358138aedf8f73f4efc6 ] If ufs_qcom_dump_dbg_regs() calls ufs_qcom_testbus_config() from ufshcd_suspend/resume and/or clk gate/ungate context, pm_runtime_get_sync() and ufshcd_hold() will cause a race condition. Fix this by removing the unnecessary calls of pm_runtime_get_sync() and ufshcd_hold(). Link: https://lore.kernel.org/r/1596975355-39813-3-git-send-email-cang@codeaurora.org Reviewed-by: Hongwu Su <hongwus@codeaurora.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: smartpqi: Avoid crashing kernel for controller issuesKevin Barnett
[ Upstream commit 9e68cccc8ef7206f0bccd590378d0dca8f9b4f57 ] Eliminate kernel panics when getting invalid responses from controller. Take controller offline instead of causing kernel panics. Link: https://lore.kernel.org/r/159622929306.30579.16523318707596752828.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Prasad Munirathnam <Prasad.Munirathnam@microsemi.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: qedi: Fix list_del corruption while removing active I/ONilesh Javali
[ Upstream commit 28b35d17f9f8573d4646dd8df08917a4076a6b63 ] While aborting the I/O, the firmware cleanup task timed out and driver deleted the I/O from active command list. Some time later the firmware sent the cleanup task response and driver again deleted the I/O from active command list causing firmware to send completion for non-existent I/O and list_del corruption of active command list. Add fix to check if I/O is present before deleting it from the active command list to ensure firmware sends valid I/O completion and protect against list_del corruption. Link: https://lore.kernel.org/r/20200908095657.26821-4-mrangankar@marvell.com Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: qedi: Protect active command list to avoid list corruptionNilesh Javali
[ Upstream commit c0650e28448d606c84f76c34333dba30f61de993 ] Protect active command list for non-I/O commands like login response, logout response, text response, and recovery cleanup of active list to avoid list corruption. Link: https://lore.kernel.org/r/20200908095657.26821-5-mrangankar@marvell.com Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: qedi: Mark all connections for recovery on link down eventNilesh Javali
[ Upstream commit 4118879be3755b38171063dfd4a57611d4b20a83 ] For short time cable pulls, the in-flight I/O to the firmware is never cleaned up, resulting in the behaviour of stale I/O completion causing list_del corruption and soft lockup of the system. On link down event, mark all the connections for recovery, causing cleanup of all the in-flight I/O immediately. Link: https://lore.kernel.org/r/20200908095657.26821-7-mrangankar@marvell.com Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: qedf: Return SUCCESS if stale rport is encounteredSaurav Kashyap
[ Upstream commit 10aff62fab263ad7661780816551420cea956ebb ] If SUCCESS is not returned, error handling will escalate. Return SUCCESS similar to other conditions in this function. Link: https://lore.kernel.org/r/20200907121443.5150-6-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: qla2xxx: Warn if done() or free() are called on an already freed srbDaniel Wagner
[ Upstream commit c0014f94218ea3a312f6235febea0d626c5f2154 ] Emit a warning when ->done or ->free are called on an already freed srb. There is a hidden use-after-free bug in the driver which corrupts the srb memory pool which originates from the cleanup callbacks. An extensive search didn't bring any lights on the real problem. The initial fix was to set both pointers to NULL and try to catch invalid accesses. But instead the memory corruption was gone and the driver didn't crash. Since not all calling places check for NULL pointer, add explicitly default handlers. With this we workaround the memory corruption and add a debug help. Link: https://lore.kernel.org/r/20200908081516.8561-2-dwagner@suse.de Reviewed-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: ibmvfc: Fix error return in ibmvfc_probe()Jing Xiangfeng
[ Upstream commit 5e48a084f4e824e1b624d3fd7ddcf53d2ba69e53 ] Fix to return error code PTR_ERR() from the error handling case instead of 0. Link: https://lore.kernel.org/r/20200907083949.154251-1-jingxiangfeng@huawei.com Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: mvumi: Fix error return in mvumi_io_attach()Jing Xiangfeng
[ Upstream commit 055f15ab2cb4a5cbc4c0a775ef3d0066e0fa9b34 ] Return PTR_ERR() from the error handling case instead of 0. Link: https://lore.kernel.org/r/20200910123848.93649-1-jingxiangfeng@huawei.com Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: bfa: Fix error return in bfad_pci_init()Jing Xiangfeng
[ Upstream commit f0f6c3a4fcb80fcbcce4ff6739996dd98c228afd ] Fix to return error code -ENODEV from the error handling case instead of 0. Link: https://lore.kernel.org/r/20200925062423.161504-1-jingxiangfeng@huawei.com Fixes: 11ea3824140c ("scsi: bfa: fix calls to dma_set_mask_and_coherent()") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()Dan Carpenter
[ Upstream commit 38b2db564d9ab7797192ef15d7aade30633ceeae ] The be_fill_queue() function can only fail when "eq_vaddress" is NULL and since it's non-NULL here that means the function call can't fail. But imagine if it could, then in that situation we would want to store the "paddr" so that dma memory can be released. Link: https://lore.kernel.org/r/20200928091300.GD377727@mwanda Fixes: bfead3b2cb46 ("[SCSI] be2iscsi: Adding msix and mcc_rings V3") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: mpt3sas: Fix sync irqsTomas Henzl
[ Upstream commit 45181eab8ba79ed7a41b549f00500c0093828521 ] _base_process_reply_queue() called from _base_interrupt() may schedule a new irq poll. Fix this by calling synchronize_irq() first. Also ensure that enable_irq() is called only when necessary to avoid "Unbalanced enable for IRQ..." errors. Link: https://lore.kernel.org/r/20200910142126.8147-1-thenzl@redhat.com Fixes: 320e77acb327 ("scsi: mpt3sas: Irq poll to avoid CPU hard lockups") Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: ufs: ufs-mediatek: Fix HOST_PA_TACTIVATE quirkStanley Chu
[ Upstream commit a3e40b80dc951057033dce86f0e675b2b822b513 ] Simply add HOST_PA_TACTIVATE quirk back since it was incorrectly removed before. Link: https://lore.kernel.org/r/20200908064507.30774-3-stanley.chu@mediatek.com Fixes: 47d054580a75 ("scsi: ufs-mediatek: fix HOST_PA_TACTIVATE quirk for Samsung UFS Devices") Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: ufs: Make ufshcd_print_trs() consider UFSHCD_QUIRK_PRDT_BYTE_GRANEric Biggers
[ Upstream commit cc770ce34aeeff21991f162f0db1a758ea672727 ] Fix ufshcd_print_trs() to consider UFSHCD_QUIRK_PRDT_BYTE_GRAN when using utp_transfer_req_desc::prd_table_length, so that it doesn't treat the number of bytes as the number of entries. Originally from Kiwoong Kim (https://lkml.kernel.org/r/20200218233115.8185-1-kwmad.kim@samsung.com). Link: https://lore.kernel.org/r/20200826021040.152148-1-ebiggers@kernel.org Fixes: 26f968d7de82 ("scsi: ufs: Introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk") Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: csiostor: Fix wrong return value in csio_hw_prep_fw()Tianjia Zhang
[ Upstream commit 44f4daf8678ae5f08c93bbe70792f90cd88e4649 ] On an error exit path, a negative error code should be returned instead of a positive return value. Link: https://lore.kernel.org/r/20200802111531.5065-1-tianjia.zhang@linux.alibaba.com Fixes: f40e74ffa3de ("csiostor:firmware upgrade fix") Cc: Praveen Madhavan <praveenm@chelsio.com> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: qla2xxx: Fix wrong return value in qla_nvme_register_hba()Tianjia Zhang
[ Upstream commit ca4fb89a3d714a770e9c73c649da830f3f4a5326 ] On an error exit path, a negative error code should be returned instead of a positive return value. Link: https://lore.kernel.org/r/20200802111530.5020-1-tianjia.zhang@linux.alibaba.com Fixes: 8777e4314d39 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine") Cc: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: qla2xxx: Fix wrong return value in qlt_chk_unresolv_exchg()Tianjia Zhang
[ Upstream commit bbf2d06a9d767718bfe6028d6288c03edb98554a ] In the case of a failed retry, a positive value EIO is returned here. I think this is a typo error. It is necessary to return an error value. [mkp: caller checks != 0 but the rest of the file uses -Exxx so fix this up to be consistent] Link: https://lore.kernel.org/r/20200802111528.4974-1-tianjia.zhang@linux.alibaba.com Fixes: 0691094ff3f2 ("scsi: qla2xxx: Add logic to detect ABTS hang and response completion") Cc: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: qla2xxx: Fix the size used in a 'dma_free_coherent()' callChristophe JAILLET
[ Upstream commit 650b323c8e7c3ac4830a20895b1d444fd68dd787 ] Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()'. [mkp: removed memset() hunk that has already been addressed] Link: https://lore.kernel.org/r/20200802110721.677707-1-christophe.jaillet@wanadoo.fr Fixes: 4161cee52df8 ("[SCSI] qla4xxx: Add host statistics support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29scsi: qla4xxx: Fix an error handling path in 'qla4xxx_get_host_stats()'Christophe JAILLET
[ Upstream commit 574918e69720fe62ab3eb42ec3750230c8d16b06 ] Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()'. Link: https://lore.kernel.org/r/20200802101527.676054-1-christophe.jaillet@wanadoo.fr Fixes: 4161cee52df8 ("[SCSI] qla4xxx: Add host statistics support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-07scsi: sd: sd_zbc: Fix ZBC disk initializationDamien Le Moal
commit 6c5dee18756b4721ac8518c69b22ee8ac0c9c442 upstream. Make sure to call sd_zbc_init_disk() when the sdkp->zoned field is known, that is, once sd_read_block_characteristics() is executed in sd_revalidate_disk(), so that host-aware disks also get initialized. To do so, move sd_zbc_init_disk() call in sd_zbc_revalidate_zones() and make sure to execute it for all zoned disks, including for host-aware disks used as regular disks as these disk zoned model may be changed back to BLK_ZONED_HA when partitions are deleted. Link: https://lore.kernel.org/r/20200915073347.832424-3-damien.lemoal@wdc.com Fixes: 5795eb443060 ("scsi: sd_zbc: emulate ZONE_APPEND commands") Cc: <stable@vger.kernel.org> # v5.8+ Reported-by: Borislav Petkov <bp@alien8.de> Tested-by: Borislav Petkov <bp@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07scsi: sd: sd_zbc: Fix handling of host-aware ZBC disksDamien Le Moal
commit 27ba3e8ff3ab86449e63d38a8d623053591e65fa upstream. When CONFIG_BLK_DEV_ZONED is disabled, allow using host-aware ZBC disks as regular disks. In this case, ensure that command completion is correctly executed by changing sd_zbc_complete() to return good_bytes instead of 0 and causing a hang during device probe (endless retries). When CONFIG_BLK_DEV_ZONED is enabled and a host-aware disk is detected to have partitions, it will be used as a regular disk. In this case, make sure to not do anything in sd_zbc_revalidate_zones() as that triggers warnings. Since all these different cases result in subtle settings of the disk queue zoned model, introduce the block layer helper function blk_queue_set_zoned() to generically implement setting up the effective zoned model according to the disk type, the presence of partitions on the disk and CONFIG_BLK_DEV_ZONED configuration. Link: https://lore.kernel.org/r/20200915073347.832424-2-damien.lemoal@wdc.com Fixes: b72053072c0b ("block: allow partitions on host aware zone devices") Cc: <stable@vger.kernel.org> Reported-by: Borislav Petkov <bp@alien8.de> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()Mark Mielke
commit bcf3a2953d36bbfb9bd44ccb3db0897d935cc485 upstream. The kernel may fail to boot or devices may fail to come up when initializing iscsi_tcp devices starting with Linux 5.8. Commit a79af8a64d39 ("[SCSI] iscsi_tcp: use iscsi_conn_get_addr_param libiscsi function") introduced getpeername() within the session spinlock. Commit 1b66d253610c ("bpf: Add get{peer, sock}name attach types for sock_addr") introduced BPF_CGROUP_RUN_SA_PROG_LOCK() within getpeername(), which acquires a mutex and when used from iscsi_tcp devices can now lead to "BUG: scheduling while atomic:" and subsequent damage. Ensure that the spinlock is released before calling getpeername() or getsockname(). sock_hold() and sock_put() are used to ensure that the socket reference is preserved until after the getpeername() or getsockname() complete. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1877345 Link: https://lkml.org/lkml/2020/7/28/1085 Link: https://lkml.org/lkml/2020/8/31/459 Link: https://lore.kernel.org/r/20200928043329.606781-1-mark.mielke@gmail.com Fixes: a79af8a64d39 ("[SCSI] iscsi_tcp: use iscsi_conn_get_addr_param libiscsi function") Fixes: 1b66d253610c ("bpf: Add get{peer, sock}name attach types for sock_addr") Cc: stable@vger.kernel.org Reported-by: Marc Dionne <marc.c.dionne@gmail.com> Tested-by: Marc Dionne <marc.c.dionne@gmail.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Mark Mielke <mark.mielke@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01scsi: lpfc: Fix initial FLOGI failure due to BBSCN not supportedJames Smart
commit 7f04839ec4483563f38062b4dd90253e45447198 upstream. Initial FLOGIs are failing with the following message: lpfc 0000:13:00.1: 1:(0):0820 FLOGI Failed (x300). BBCredit Not Supported In a prior patch, the READ_SPARAM command was re-ordered to post after CONFIG_LINK as the driver is expected to update the driver's copy of the service parameters for the FLOGI payload. If the bb-credit recovery feature is enabled, this is fine. But on adapters were bb-credit recovery isn't enabled, it would cause the FLOGI to fail. Fix by restoring the original command order (READ_SPARAM before CONFIG_LINK), and after issuing CONFIG_LINK, detect bb-credit recovery support and reissuing READ_SPARAM to obtain the updated service parameters (effectively adding in the fix command order). [mkp: corrected SHA] Link: https://lore.kernel.org/r/20200911200147.110826-1-james.smart@broadcom.com Fixes: 835214f5d5f5 ("scsi: lpfc: Fix broken Credit Recovery after driver load") CC: <stable@vger.kernel.org> # v5.7+ Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-23scsi: libsas: Fix error path in sas_notify_lldd_dev_found()Dan Carpenter
[ Upstream commit 244359c99fd90f1c61c3944f93250f8219435c75 ] In sas_notify_lldd_dev_found(), if we can't allocate the necessary resources, then it seems like the wrong thing to mark the device as found and to increment the reference count. None of the callers ever drop the reference in that situation. [mkp: tweaked commit desc based on feedback from John] Link: https://lore.kernel.org/r/20200905125836.GF183976@mwanda Fixes: 735f7d2fedf5 ("[SCSI] libsas: fix domain_device leak") Reviewed-by: Jason Yan <yanaijie@huawei.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23scsi: lpfc: Extend the RDF FPIN Registration descriptor for additional eventsJames Smart
[ Upstream commit 441f6b5b097d74a8aa72ec0d8992ef820e2b3773 ] Currently the driver registers for Link Integrity events only. This patch adds registration for the following FPIN types: - Delivery Notifications - Congestion Notification - Peer Congestion Notification Link: https://lore.kernel.org/r/20200828175332.130300-4-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discoveryJames Smart
[ Upstream commit 7b08e89f98cee9907895fabb64cf437bc505ce9a ] The driver is unable to successfully login with remote device. During pt2pt login, the driver completes its FLOGI request with the remote device having WWN precedence. The remote device issues its own (delayed) FLOGI after accepting the driver's and, upon transmitting the FLOGI, immediately recognizes it has already processed the driver's FLOGI thus it transitions to sending a PLOGI before waiting for an ACC to its FLOGI. In the driver, the FLOGI is received and an ACC sent, followed by the PLOGI being received and an ACC sent. The issue is that the PLOGI reception occurs before the response from the adapter from the FLOGI ACC is received. Processing of the PLOGI sets state flags to perform the REG_RPI mailbox command and proceed with the rest of discovery on the port. The same completion routine used by both FLOGI and PLOGI is generic in nature. One of the things it does is clear flags, and those flags happen to drive the rest of discovery. So what happened was the PLOGI processing set the flags, the FLOGI ACC completion cleared them, thus when the PLOGI ACC completes it doesn't see the flags and stops. Fix by modifying the generic completion routine to not clear the rest of discovery flag (NLP_ACC_REGLOGIN) unless the completion is also associated with performing a mailbox command as part of its handling. For things such as FLOGI ACC, there isn't a subsequent action to perform with the adapter, thus there is no mailbox cmd ptr. PLOGI ACC though will perform REG_RPI upon completion, thus there is a mailbox cmd ptr. Link: https://lore.kernel.org/r/20200828175332.130300-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23scsi: libfc: Fix for double free()Javed Hasan
[ Upstream commit 5a5b80f98534416b3b253859897e2ba1dc241e70 ] Fix for '&fp->skb' double free. Link: https://lore.kernel.org/r/20200825093940.19612-1-jhasan@marvell.com Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abortDinghao Liu
[ Upstream commit ea403fde7552bd61bad6ea45e3feb99db77cb31e ] When pm8001_tag_alloc() fails, task should be freed just like it is done in the subsequent error paths. Link: https://lore.kernel.org/r/20200823091453.4782-1-dinghao.liu@zju.edu.cn Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-17scsi: lpfc: Fix setting IRQ affinity with an empty CPU maskJames Smart
commit 7ac836ebcb1509845fe7d66314f469f8e709da93 upstream. Some systems are reporting the following log message during driver unload or system shutdown: ics_rtas_set_affinity: No online cpus in the mask A prior commit introduced the writing of an empty affinity mask in calls to irq_set_affinity_hint() when disabling interrupts or when there are no remaining online CPUs to service an eq interrupt. At least some ppc64 systems are checking whether affinity masks are empty or not. Do not call irq_set_affinity_hint() with an empty CPU mask. Fixes: dcaa21367938 ("scsi: lpfc: Change default IRQ model on AMD architectures") Link: https://lore.kernel.org/r/20200828175332.130300-2-james.smart@broadcom.com Cc: <stable@vger.kernel.org> # v5.5+ Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-17scsi: qedf: Fix null ptr reference in qedf_stag_change_workYe Bin
[ Upstream commit f308a35f547cd7c1d8a901c12b3ac508e96df665 ] Link: https://lore.kernel.org/r/20200824033436.45570-1-yebin10@huawei.com Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-17scsi: mpt3sas: Don't call disable_irq from IRQ poll handlerTomas Henzl
[ Upstream commit b614d55b970d08bcac5b0bc15a5526181b3e4459 ] disable_irq() might sleep, replace it with disable_irq_nosync(). For synchronisation 'irq_poll_scheduled' is sufficient Fixes: 320e77acb3 scsi: mpt3sas: Irq poll to avoid CPU hard lockups Link: https://lore.kernel.org/r/20200901145026.12174-1-thenzl@redhat.com Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-17scsi: megaraid_sas: Don't call disable_irq from process IRQ pollTomas Henzl
[ Upstream commit d2af39141eea34ef651961e885f49d96781a1016 ] disable_irq() might sleep. Replace it with disable_irq_nosync() which is sufficient as irq_poll_scheduled protects against concurrently running complete_cmd_fusion() from megasas_irqpoll() and megasas_isr_fusion(). Link: https://lore.kernel.org/r/20200827165332.8432-1-thenzl@redhat.com Fixes: a6ffd5bf681 scsi: megaraid_sas: Call disable_irq from process IRQ poll Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-17scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATALuo Jiaxing
[ Upstream commit 53de092f47ff40e8d4d78d590d95819d391bf2e0 ] It was discovered that sdparm will fail when attempting to disable write cache on a SATA disk connected via libsas. In the ATA command set the write cache state is controlled through the SET FEATURES operation. This is roughly corresponds to MODE SELECT in SCSI and the latter command is what is used in the SCSI-ATA translation layer. A subtle difference is that a MODE SELECT carries data whereas SET FEATURES is defined as a non-data command in ATA. Set the DMA data direction to DMA_NONE if the requested ATA command is identified as non-data. [mkp: commit desc] Fixes: fa1c1e8f1ece ("[SCSI] Add SATA support to libsas") Link: https://lore.kernel.org/r/1598426666-54544-1-git-send-email-luojiaxing@huawei.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-17scsi: qla2xxx: Fix regression on sparc64René Rebe
[ Upstream commit 2a87d485c4cb4d1b34be6c278a1c6ce3e15c8b8a ] Commit 98aee70d19a7 ("qla2xxx: Add endianizer to max_payload_size modifier.") in 2014 broke qla2xxx on sparc64, e.g. as in the Sun Blade 1000 / 2000. Unbreak by partial revert to fix endianness in nvram firmware default initialization. Also mark the second frame_payload_size in nvram_t __le16 to avoid new sparse warnings. Link: https://lore.kernel.org/r/20200827.222729.1875148247374704975.rene@exactcode.com Fixes: 98aee70d19a7 ("qla2xxx: Add endianizer to max_payload_size modifier.") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Arun Easi <aeasi@marvell.com> Signed-off-by: René Rebe <rene@exactcode.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command"Saurav Kashyap
[ Upstream commit de7e6194301ad31c4ce95395eb678e51a1b907e5 ] FCoE adapter initialization failed for ISP8021 with the following patch applied. In addition, reproduction of the issue the patch originally tried to address has been unsuccessful. This reverts commit 3cb182b3fa8b7a61f05c671525494697cba39c6a. Link: https://lore.kernel.org/r/20200806111014.28434-11-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03scsi: qla2xxx: Fix null pointer access during disconnect from subsystemQuinn Tran
[ Upstream commit 83949613fac61e8e37eadf8275bf072342302f4e ] NVMEAsync command is being submitted to QLA while the same NVMe controller is in the middle of reset. The reset path has deleted the association and freed aen_op->fcp_req.private. Add a check for this private pointer before issuing the command. ... 6 [ffffb656ca11fce0] page_fault at ffffffff8c00114e [exception RIP: qla_nvme_post_cmd+394] RIP: ffffffffc0d012ba RSP: ffffb656ca11fd98 RFLAGS: 00010206 RAX: ffff8fb039eda228 RBX: ffff8fb039eda200 RCX: 00000000000da161 RDX: ffffffffc0d4d0f0 RSI: ffffffffc0d26c9b RDI: ffff8fb039eda220 RBP: 0000000000000013 R8: ffff8fb47ff6aa80 R9: 0000000000000002 R10: 0000000000000000 R11: ffffb656ca11fdc8 R12: ffff8fb27d04a3b0 R13: ffff8fc46dd98a58 R14: 0000000000000000 R15: ffff8fc4540f0000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffffb656ca11fe08] nvme_fc_start_fcp_op at ffffffffc0241568 [nvme_fc] 8 [ffffb656ca11fe50] nvme_fc_submit_async_event at ffffffffc0241901 [nvme_fc] 9 [ffffb656ca11fe68] nvme_async_event_work at ffffffffc014543d [nvme_core] 10 [ffffb656ca11fe98] process_one_work at ffffffff8b6cd437 11 [ffffb656ca11fed8] worker_thread at ffffffff8b6cdcef 12 [ffffb656ca11ff10] kthread at ffffffff8b6d3402 13 [ffffb656ca11ff50] ret_from_fork at ffffffff8c000255 -- PID: 37824 TASK: ffff8fb033063d80 CPU: 20 COMMAND: "kworker/u97:451" 0 [ffffb656ce1abc28] __schedule at ffffffff8be629e3 1 [ffffb656ce1abcc8] schedule at ffffffff8be62fe8 2 [ffffb656ce1abcd0] schedule_timeout at ffffffff8be671ed 3 [ffffb656ce1abd70] wait_for_completion at ffffffff8be639cf 4 [ffffb656ce1abdd0] flush_work at ffffffff8b6ce2d5 5 [ffffb656ce1abe70] nvme_stop_ctrl at ffffffffc0144900 [nvme_core] 6 [ffffb656ce1abe80] nvme_fc_reset_ctrl_work at ffffffffc0243445 [nvme_fc] 7 [ffffb656ce1abe98] process_one_work at ffffffff8b6cd437 8 [ffffb656ce1abed8] worker_thread at ffffffff8b6cdb50 9 [ffffb656ce1abf10] kthread at ffffffff8b6d3402 10 [ffffb656ce1abf50] ret_from_fork at ffffffff8c000255 Link: https://lore.kernel.org/r/20200806111014.28434-10-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03scsi: qla2xxx: Check if FW supports MQ before enablingSaurav Kashyap
[ Upstream commit dffa11453313a115157b19021cc2e27ea98e624c ] OS boot during Boot from SAN was stuck at dracut emergency shell after enabling NVMe driver parameter. For non-MQ support the driver was enabling MQ. Add a check to confirm if FW supports MQ. Link: https://lore.kernel.org/r/20200806111014.28434-9-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03scsi: qla2xxx: Fix login timeoutQuinn Tran
[ Upstream commit abb31aeaa9b20680b0620b23fea5475ea4591e31 ] Multipath errors were seen during failback due to login timeout. The remote device sent LOGO, the local host tore down the session and did relogin. The RSCN arrived indicates remote device is going through failover after which the relogin is in a 20s timeout phase. At this point the driver is stuck in the relogin process. Add a fix to delete the session as part of abort/flush the login. Link: https://lore.kernel.org/r/20200806111014.28434-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03scsi: qla2xxx: Indicate correct supported speeds for Mezz cardQuinn Tran
[ Upstream commit 4709272f6327cc4a8ee1dc55771bcf9718346980 ] Correct the supported speeds for 16G Mezz card. Link: https://lore.kernel.org/r/20200806111014.28434-4-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03scsi: qla2xxx: Flush I/O on zone disableQuinn Tran
[ Upstream commit a117579d0205b5a0592a3a98493e2b875e4da236 ] Perform implicit logout to flush I/O on zone disable. Link: https://lore.kernel.org/r/20200806111014.28434-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03scsi: qla2xxx: Flush all sessions on zone disableQuinn Tran
[ Upstream commit 10ae30ba664822f62de169a61628e31c999c7cc8 ] On Zone Disable, certain switches would ignore all commands. This causes timeout for both switch scan command and abort of that command. On detection of this condition, all sessions will be shutdown. Link: https://lore.kernel.org/r/20200806111014.28434-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03scsi: scsi_debug: Fix scp is NULL errorsDouglas Gilbert
[ Upstream commit 223f91b48079227f914657f07d2d686f7b60aa26 ] John Garry reported 'sdebug_q_cmd_complete: scp is NULL' failures that were mainly seen on aarch64 machines (e.g. RPi 4 with four A72 CPUs). The problem was tracked down to a missing critical section on a "short circuit" path. Namely, the time to process the current command so far has already exceeded the requested command duration (i.e. the number of nanoseconds in the ndelay parameter). The random=1 parameter setting was pivotal in finding this error. The failure scenario involved first taking that "short circuit" path (due to a very short command duration) and then taking the more likely hrtimer_start() path (due to a longer command duration). With random=1 each command's duration is taken from the uniformly distributed [0..ndelay) interval. The fio utility also helped by reliably generating the error scenario at about once per minute on a RPi 4 (64 bit OS). Link: https://lore.kernel.org/r/20200813155738.109298-1-dgilbert@interlog.com Reported-by: John Garry <john.garry@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03scsi: ufs: Clean up completed request without interrupt notificationStanley Chu
[ Upstream commit b10178ee7fa88b68a9e8adc06534d2605cb0ec23 ] If somehow no interrupt notification is raised for a completed request and its doorbell bit is cleared by host, UFS driver needs to cleanup its outstanding bit in ufshcd_abort(). Otherwise, system may behave abnormally in the following scenario: After ufshcd_abort() returns, this request will be requeued by SCSI layer with its outstanding bit set. Any future completed request will trigger ufshcd_transfer_req_compl() to handle all "completed outstanding bits". At this time the "abnormal outstanding bit" will be detected and the "requeued request" will be chosen to execute request post-processing flow. This is wrong because this request is still "alive". Link: https://lore.kernel.org/r/20200811141859.27399-2-huobean@gmail.com Reviewed-by: Can Guo <cang@codeaurora.org> Acked-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03scsi: ufs: Improve interrupt handling for shared interruptsAdrian Hunter
[ Upstream commit 127d5f7c4b653b8be5eb3b2c7bbe13728f9003ff ] For shared interrupts, the interrupt status might be zero, so check that first. Link: https://lore.kernel.org/r/20200811133936.19171-2-adrian.hunter@intel.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03scsi: ufs: Fix possible infinite loop in ufshcd_holdStanley Chu
[ Upstream commit 93b6c5db06028a3b55122bbb74d0715dd8ca4ae0 ] In ufshcd_suspend(), after clk-gating is suspended and link is set as Hibern8 state, ufshcd_hold() is still possibly invoked before ufshcd_suspend() returns. For example, MediaTek's suspend vops may issue UIC commands which would call ufshcd_hold() during the command issuing flow. Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled, then ufshcd_hold() may enter infinite loops because there is no clk-ungating work scheduled or pending. In this case, ufshcd_hold() shall just bypass, and keep the link as Hibern8 state. Link: https://lore.kernel.org/r/20200809050734.18740-1-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Co-developed-by: Andy Teng <andy.teng@mediatek.com> Signed-off-by: Andy Teng <andy.teng@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03scsi: fcoe: Memory leak fix in fcoe_sysfs_fcf_del()Javed Hasan
[ Upstream commit e95b4789ff4380733006836d28e554dc296b2298 ] In fcoe_sysfs_fcf_del(), we first deleted the fcf from the list and then freed it if ctlr_dev was not NULL. This was causing a memory leak. Free the fcf even if ctlr_dev is NULL. Link: https://lore.kernel.org/r/20200729081824.30996-3-jhasan@marvell.com Reviewed-by: Girish Basrur <gbasrur@marvell.com> Reviewed-by: Santosh Vernekar <svernekar@marvell.com> Reviewed-by: Saurav Kashyap <skashyap@marvell.com> Reviewed-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03scsi: iscsi: Do not put host in iscsi_set_flashnode_param()Jing Xiangfeng
[ Upstream commit 68e12e5f61354eb42cfffbc20a693153fc39738e ] If scsi_host_lookup() fails we will jump to put_host which may cause a panic. Jump to exit_set_fnode instead. Link: https://lore.kernel.org/r/20200615081226.183068-1-jingxiangfeng@huawei.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03scsi: lpfc: Fix shost refcount mismatch when deleting vportDick Kennedy
[ Upstream commit 03dbfe0668e6692917ac278883e0586cd7f7d753 ] When vports are deleted, it is observed that there is memory/kthread leakage as the vport isn't fully being released. There is a shost reference taken in scsi_add_host_dma that is not released during scsi_remove_host. It was noticed that other drivers resolve this by doing a scsi_host_put after calling scsi_remove_host. The vport_delete routine is taking two references one that corresponds to an access to the scsi_host in the vport_delete routine and another that is released after the adapter mailbox command completes that destroys the VPI that corresponds to the vport. Remove one of the references taken such that the second reference that is put will complete the missing scsi_add_host_dma reference and the shost will be terminated. Link: https://lore.kernel.org/r/20200630215001.70793-8-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"Quinn Tran
[ Upstream commit dca93232b361d260413933903cd4bdbd92ebcc7f ] FCP T10-PI and NVMe features are independent of each other. This patch allows both features to co-exist. This reverts commit 5da05a26b8305a625bc9d537671b981795b46dab. Link: https://lore.kernel.org/r/20200806111014.28434-12-njavali@marvell.com Fixes: 5da05a26b830 ("scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26scsi: ufs: Fix interrupt error message for shared interruptsAdrian Hunter
[ Upstream commit 6337f58cec030b34ced435b3d9d7d29d63c96e36 ] The interrupt might be shared, in which case it is not an error for the interrupt handler to be called when the interrupt status is zero, so don't print the message unless there was enabled interrupt status. Link: https://lore.kernel.org/r/20200811133936.19171-1-adrian.hunter@intel.com Fixes: 9333d7757348 ("scsi: ufs: Fix irq return code") Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-07-03 22:24:36 +0000