| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit f9f0a46141e2e39bedb4779c88380d1b5f018c14 ]
When myrb_probe() fails the callback might not be set, so we need to
validate the 'disable_intr' callback in myrb_cleanup() to not cause a null
pointer exception. And while at it do not call myrb_cleanup() if we cannot
enable the PCI device at all.
Link: https://lore.kernel.org/r/20220523120244.99515-1-hare@suse.de
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 05fbde3a77a4f1d62e4c4428f384288c1f1a0be5 ]
If sd_probe() sees an early error before sdkp->device is initialized,
sd_zbc_release_disk() is called. This causes a NULL pointer dereference
when sd_is_zoned() is called inside that function. Avoid this by removing
the call to sd_zbc_release_disk() in sd_probe() error path.
This change is safe and does not result in zone information memory leakage
because the zone information for a zoned disk is allocated only when
sd_revalidate_disk() is called, at which point sdkp->disk_dev is fully set,
resulting in sd_disk_release() being called when needed to cleanup a disk
zone information using sd_zbc_release_disk().
Link: https://lore.kernel.org/r/20220601062544.905141-2-damien.lemoal@opensource.wdc.com
Fixes: 89d947561077 ("sd: Implement support for ZBC devices")
Reported-by: Dongliang Mu <mudongliangabcd@gmail.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8eecddfca30e1651dc1c74531ed5eef21dcce7e3 upstream.
In ufs_qcom_dev_ref_clk_ctrl(), it was noted that the ref_clk needs to be
stable for at least 1us. Even though there is wmb() to make sure the write
gets "completed", there is no guarantee that the write actually reached the
UFS device. There is a good chance that the write could be stored in a
Write Buffer (WB). In that case, even though the CPU waits for 1us, the
ref_clk might not be stable for that period.
So lets do a readl() to make sure that the previous write has reached the
UFS device before udelay().
Also, the wmb() after writel_relaxed() is not really needed. Both writel()
and readl() are ordered on all architectures and the CPU won't speculate
instructions after readl() due to the in-built control dependency with read
value on weakly ordered architectures. So it can be safely removed.
Link: https://lore.kernel.org/r/20220504084212.11605-4-manivannan.sadhasivam@linaro.org
Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Cc: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 036a45aa587a10fa2abbd50fbd0f6c4cfc44f69f upstream.
The bug is here:
p->target_id, p->target_lun);
The list iterator 'p' will point to a bogus position containing HEAD if the
list is empty or no element is found. This case must be checked before any
use of the iterator, otherwise it will lead to an invalid memory access.
To fix this bug, add a check. Use a new variable 'iter' as the list
iterator, and use the original variable 'p' as a dedicated pointer to point
to the found element.
Link: https://lore.kernel.org/r/20220414040231.2662-1-xiam0nd.tong@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 54db804d5d7d36709d1ce70bde3b9a6c61b290b6 ]
Fix the following Wstringop-overflow warnings when building with GCC-11:
drivers/scsi/fcoe/fcoe.c: In function ‘fcoe_netdev_config’:
drivers/scsi/fcoe/fcoe.c:744:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
744 | wwnn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, 1, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/fcoe/fcoe.c:744:32: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/fcoe/fcoe.c:36:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
drivers/scsi/fcoe/fcoe.c:747:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
747 | wwpn = fcoe_wwn_from_mac(ctlr->ctl_src_addr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
748 | 2, 0);
| ~~~~~
drivers/scsi/fcoe/fcoe.c:747:32: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/fcoe/fcoe.c:36:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
CC drivers/scsi/bnx2fc/bnx2fc_io.o
In function ‘bnx2fc_net_config’,
inlined from ‘bnx2fc_if_create’ at drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1543:7:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:833:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
833 | wwnn = fcoe_wwn_from_mac(ctlr->ctl_src_addr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
834 | 1, 0);
| ~~~~~
drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function ‘bnx2fc_if_create’:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:833:32: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/bnx2fc/bnx2fc.h:53,
from drivers/scsi/bnx2fc/bnx2fc_fcoe.c:17:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
In function ‘bnx2fc_net_config’,
inlined from ‘bnx2fc_if_create’ at drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1543:7:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:839:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
839 | wwpn = fcoe_wwn_from_mac(ctlr->ctl_src_addr,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
840 | 2, 0);
| ~~~~~
drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function ‘bnx2fc_if_create’:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:839:32: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/bnx2fc/bnx2fc.h:53,
from drivers/scsi/bnx2fc/bnx2fc_fcoe.c:17:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
drivers/scsi/qedf/qedf_main.c: In function ‘__qedf_probe’:
drivers/scsi/qedf/qedf_main.c:3520:30: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
3520 | qedf->wwnn = fcoe_wwn_from_mac(qedf->mac, 1, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qedf/qedf_main.c:3520:30: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/qedf/qedf.h:9,
from drivers/scsi/qedf/qedf_main.c:23:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
drivers/scsi/qedf/qedf_main.c:3521:30: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=]
3521 | qedf->wwpn = fcoe_wwn_from_mac(qedf->mac, 2, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/qedf/qedf_main.c:3521:30: note: referencing argument 1 of type ‘unsigned char *’
In file included from drivers/scsi/qedf/qedf.h:9,
from drivers/scsi/qedf/qedf_main.c:23:
./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’
252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int);
| ^~~~~~~~~~~~~~~~~
by changing the array size to the correct value of ETH_ALEN in the
argument declaration.
Also, fix a couple of checkpatch warnings:
WARNING: function definition argument 'unsigned int' should also have an identifier name
This helps with the ongoing efforts to globally enable
-Wstringop-overflow.
Link: https://github.com/KSPP/linux/issues/181
Fixes: 85b4aa4926a5 ("[SCSI] fcoe: Fibre Channel over Ethernet")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef60031022eb6d972aac86ca26c98c33e1289436 ]
Some devices may return invalid or zeroed data during an UIC error
condition. In addition, reading these SFRs will clear them. This means the
subsequent error handling will not be able to see them and therefore no
error handling will be scheduled.
Skip reading these SFRs in ufshcd_dump_regs().
Link: https://lore.kernel.org/r/1648689845-33521-1-git-send-email-kwmad.kim@samsung.com
Fixes: d67247566450 ("scsi: ufs: Use explicit access size in ufshcd_dump_regs")
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bee40dc167da159ea5b939c074e1da258610a3d6 ]
Clearing hba->is_sys_suspended if ufs_qcom_resume() succeeds is wrong. That
variable must only be cleared if all actions involved in a resume succeed.
Hence remove the statement that clears hba->is_sys_suspended from
ufs_qcom_resume().
Link: https://lore.kernel.org/r/20220419225811.4127248-23-bvanassche@acm.org
Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e6f51041450282a8668af3a8fc5c7744e81a447c ]
When configuring CMF management based on signals instead of FPINs, FPIN
alarm and warning statistics are not tracked.
Change the behavior so that FPIN alarms and warnings are always tracked
regardless of the configured mode.
Similar changes are made in the CMF signal stat accounting logic. Upon
receipt of a signal, only track signaled alarms and warnings. FPIN stats
should not be incremented upon receipt of a signal.
Link: https://lore.kernel.org/r/20220506035519.50908-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 646db1a560f44236b7278b822ca99a1d3b6ea72c ]
If no handler is found in lpfc_complete_unsol_iocb() to match the rctl of a
received frame, the frame is dropped and resources are leaked.
Fix by returning resources when discarding an unhandled frame type. Update
lpfc_fc_frame_check() handling of NOP basic link service.
Link: https://lore.kernel.org/r/20220426181419.9154-1-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 75b8715e20a20bc7b4844835e4035543a2674200 ]
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync() and
pm_runtime_put_noidle(). This change is just to simplify the code, no
actual functional changes.
Link: https://lore.kernel.org/r/20220420090353.2588804-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c5acd61dbb32b6bda0f3a354108f2b8dcb788985 ]
If major equals 0, register_chrdev() returns an error code when it fails.
This function dynamically allocates a major and returns its number on
success, so we should use "< 0" to check it instead of "!".
Link: https://lore.kernel.org/r/20220418105755.2558828-1-lv.ruyi@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d6d45f67a11136cb88a70a29ab22ea6db8ae6bd5 ]
The following was seen with CMF enabled:
BUG: using smp_processor_id() in preemptible
code: systemd-udevd/31711
kernel: caller is lpfc_update_cmf_cmd+0x214/0x420 [lpfc]
kernel: CPU: 12 PID: 31711 Comm: systemd-udevd
kernel: Call Trace:
kernel: <TASK>
kernel: dump_stack_lvl+0x44/0x57
kernel: check_preemption_disabled+0xbf/0xe0
kernel: lpfc_update_cmf_cmd+0x214/0x420 [lpfc]
kernel: lpfc_nvme_fcp_io_submit+0x23b4/0x4df0 [lpfc]
this_cpu_ptr() calls smp_processor_id() in a preemptible context.
Fix by using per_cpu_ptr() with raw_smp_processor_id() instead.
Link: https://lore.kernel.org/r/20220412222008.126521-16-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03cbbd7c2f5ee288f648f4aeedc765a181188553 ]
During stress I/O tests with 500+ vports, hard LOCKUP call traces are
observed.
CPU A:
native_queued_spin_lock_slowpath+0x192
_raw_spin_lock_irqsave+0x32
lpfc_handle_fcp_err+0x4c6
lpfc_fcp_io_cmd_wqe_cmpl+0x964
lpfc_sli4_fp_handle_cqe+0x266
__lpfc_sli4_process_cq+0x105
__lpfc_sli4_hba_process_cq+0x3c
lpfc_cq_poll_hdler+0x16
irq_poll_softirq+0x76
__softirqentry_text_start+0xe4
irq_exit+0xf7
do_IRQ+0x7f
CPU B:
native_queued_spin_lock_slowpath+0x5b
_raw_spin_lock+0x1c
lpfc_abort_handler+0x13e
scmd_eh_abort_handler+0x85
process_one_work+0x1a7
worker_thread+0x30
kthread+0x112
ret_from_fork+0x1f
Diagram of lockup:
CPUA CPUB
---- ----
lpfc_cmd->buf_lock
phba->hbalock
lpfc_cmd->buf_lock
phba->hbalock
Fix by reordering the taking of the lpfc_cmd->buf_lock and phba->hbalock in
lpfc_abort_handler routine so that it tries to take the lpfc_cmd->buf_lock
first before phba->hbalock.
Link: https://lore.kernel.org/r/20220412222008.126521-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e294647b1aed4247fe52851f3a3b2b19ae906228 ]
In an attempt to log message 0126 with LOG_TRACE_EVENT, the following hard
lockup call trace hangs the system.
Call Trace:
_raw_spin_lock_irqsave+0x32/0x40
lpfc_dmp_dbg.part.32+0x28/0x220 [lpfc]
lpfc_cmpl_els_fdisc+0x145/0x460 [lpfc]
lpfc_sli_cancel_jobs+0x92/0xd0 [lpfc]
lpfc_els_flush_cmd+0x43c/0x670 [lpfc]
lpfc_els_flush_all_cmd+0x37/0x60 [lpfc]
lpfc_sli4_async_event_proc+0x956/0x1720 [lpfc]
lpfc_do_work+0x1485/0x1d70 [lpfc]
kthread+0x112/0x130
ret_from_fork+0x1f/0x40
Kernel panic - not syncing: Hard LOCKUP
The same CPU tries to claim the phba->port_list_lock twice.
Move the cfg_log_verbose checks as part of the lpfc_printf_vlog() and
lpfc_printf_log() macros before calling lpfc_dmp_dbg(). There is no need
to take the phba->port_list_lock within lpfc_dmp_dbg().
Link: https://lore.kernel.org/r/20220412222008.126521-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 26f9ce53817a8fd84b69a73473a7de852a24c897 ]
Aborting commands that have already been sent to the firmware can
cause BUG in qlt_free_cmd(): BUG_ON(cmd->sg_mapped)
For instance:
- Command passes rdx_to_xfer state, maps sgl, sends to the firmware
- Reset occurs, qla2xxx performs ISP error recovery, aborts the command
- Target stack calls qlt_abort_cmd() and then qlt_free_cmd()
- BUG_ON(cmd->sg_mapped) in qlt_free_cmd() occurs because sgl was not
unmapped
Thus, unmap sgl in qlt_abort_cmd() for commands with the aborted flag set.
Link: https://lore.kernel.org/r/AS8PR10MB4952D545F84B6B1DFD39EC1E9DEE9@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COM
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6056a92ceb2a7705d61df7ec5370548e96aee258 ]
The handling of the ALUA transitioning state is currently broken. When a
target goes into this state, it is expected that the target is allowed to
stay in this state for the implicit transition timeout without a path
failure. The handler has this logic, but it gets skipped currently.
When the target transitions, there is in-flight I/O from the initiator. The
first of these responses from the target will be a unit attention letting
the initiator know that the ALUA state has changed. The remaining
in-flight I/Os, before the initiator finds out that the portal state has
changed, will return not ready, ALUA state is transitioning. The portal
state will change to SCSI_ACCESS_STATE_TRANSITIONING. This will lead to all
new I/O immediately failing the path unexpectedly. The path failure happens
in less than a second instead of the expected successes until the
transition timer is exceeded.
Allow I/Os to continue while the path is in the ALUA transitioning
state. The handler already takes care of a target that stays in the
transitioning state for too long by changing the state to ALUA state
standby once the transition timeout is exceeded at which point the path
will fail.
Link: https://lore.kernel.org/r/CAHZQxy+4sTPz9+pY3=7VJH+CLUJsDct81KtnR2be8ycN5mhqTg@mail.gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Krishna Kant <krishna.kant@purestorage.com>
Acked-by: Seamus Connor <sconnor@purestorage.com>
Signed-off-by: Brian Bunker <brian@purestorage.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d5d92b64408443e113b9742f8f1c35278910dd4d ]
Fix referencing sense data when it is invalid. When the length of the data
segment is 0, there is no valid information in the rsp field, so
ufshpb_rsp_upiu() is returned without additional operation.
Link: https://lore.kernel.org/r/252651381.41652940482659.JavaMail.epsvc@epcpadp4
Fixes: 4b5f49079c52 ("scsi: ufs: ufshpb: L2P map management for HPB read")
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit faad6cebded8e0fd902b672f220449b93db479eb ]
sr_ioctl.c uses this pattern:
result = sr_do_ioctl(cd, &cgc);
to-user = buffer[];
kfree(buffer);
return result;
Use of a buffer without checking leaks information. Check result and jump
over the use of buffer if there is an error.
result = sr_do_ioctl(cd, &cgc);
if (result)
goto err;
to-user = buffer[];
err:
kfree(buffer);
return result;
Additionally, initialize the buffer to zero.
This problem can be seen in the 2.4.0 kernel.
Link: https://lore.kernel.org/r/20220411174756.2418435-1-trix@redhat.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 857b06527f707f5df634b854898a191b5c1d0272 ]
We set the qedi_ep state to EP_STATE_OFLDCONN_START when the ep is
created. Then in qedi_set_path we kick off the offload work. If userspace
times out the connection and calls ep_disconnect, qedi will only flush the
offload work if the qedi_ep state has transitioned away from
EP_STATE_OFLDCONN_START. If we can't connect we will not have transitioned
state and will leave the offload work running, and we will free the qedi_ep
from under it.
This patch just has us init the work when we create the ep, then always
flush it.
Link: https://lore.kernel.org/r/20220408001314.5014-10-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 44ac97109e42f87b1a34954704b81b6c8eca80c4 ]
If a offload driver doesn't use the xmit workqueue, then when we are doing
ep_disconnect libiscsi can still inject PDUs to the driver. This adds a
check for if the connection is bound before trying to inject PDUs.
Link: https://lore.kernel.org/r/20220408001314.5014-9-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5bd856256f8c03e329f8ff36d8c8efcb111fe6df ]
Move the tx and rx suspend fields into one flags field.
Link: https://lore.kernel.org/r/20220408001314.5014-8-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c6ae371b8a1ffba1fc415989fd581ebf841ed0a ]
We can't release the endpoint ID until all references to the endpoint have
been dropped or it could be allocated while in use. This has us use an idr
instead of looping over all conns to find a free ID and then free the ID
when all references have been dropped instead of when the device is only
deleted.
Link: https://lore.kernel.org/r/20220408001314.5014-4-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2bd3b6b75946db2ace06e145d53988e10ed7e99a upstream.
When ufs initializes without scmd->device->sector_size set, scsi_get_lba()
will get a wrong shift number and trigger an ubsan error. The shift
exponent 4294967286 is too large for the 64-bit type 'sector_t' (aka
'unsigned long long').
Call scsi_get_lba() only when opcode is READ_10/WRITE_10/UNMAP.
Link: https://lore.kernel.org/r/20220307111752.10465-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 56495f295d8e021f77d065b890fc0100e3f9f6d8 ]
The megaraid_sas driver supports single LUN for RAID devices. That is LUN
0. All other LUNs are unsupported. When a device scan on a logical target
with invalid LUN number is invoked through sysfs, that target ends up
getting removed.
Add LUN ID validation in the slave destroy function to avoid the target
deletion.
Link: https://lore.kernel.org/r/20220324094711.48833-1-chandrakanth.patil@broadcom.com
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f2bce1e222028dc1c15f130109a17aa654ae6e8 ]
The HighPoint RocketRaid 2640 is a low-cost SAS controller based on Marvell
chip. The chip in question was already supported by the kernel, just the
PCI ID of this particular board was missing.
Link: https://lore.kernel.org/r/20220309212535.402987-1-agalakhov@gmail.com
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f61eb1216c959f93ffabd3b8781fa5b2b22f8907 ]
As part of controller reset operation the driver issues a config request
command. If this command gets times out, then fail the controller reset
operation instead of retrying it.
Link: https://lore.kernel.org/r/20220405120637.20528-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0bade8e53279157c7cc9dd95d573b7e82223d78a ]
The adapter request_limit is hardcoded to be INITIAL_SRP_LIMIT which is
currently an arbitrary value of 800. Increase this value to 1024 which
better matches the characteristics of the typical IBMi Initiator that
supports 32 LUNs and a queue depth of 32.
This change also has the secondary benefit of being a power of two as
required by the kfifo API. Since, Commit ab9bb6318b09 ("Partially revert
"kfifo: fix kfifo_alloc() and kfifo_init()"") the size of IU pool for each
target has been rounded down to 512 when attempting to kfifo_init() those
pools with the current request_limit size of 800.
Link: https://lore.kernel.org/r/20220322194443.678433-1-tyreld@linux.ibm.com
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit df0101197c4d9596682901631f3ee193ed354873 ]
When recovering from a pci-parity error the driver is failing to re-create
queues, causing recovery to fail. Looking deeper, it was found that the
interrupt vector count allocated on the recovery was fewer than the vectors
originally allocated. This disparity resulted in CPU map entries with stale
information. When the driver tries to re-create the queues, it attempts to
use the stale information which indicates an eq/interrupt vector that was
no longer created.
Fix by clearng the cpup map array before enabling and requesting the IRQs
in the lpfc_sli_reset_slot_s4 routine().
Link: https://lore.kernel.org/r/20220317032737.45308-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03690d81974535f228e892a14f0d2d44404fe555 ]
If a driver raises a connection error before the connection is bound, we
can leave a cleanup_work queued that can later run and disconnect/stop a
connection that is logged in. The problem is that drivers can call
iscsi_conn_error_event for endpoints that are connected but not yet bound
when something like the network port they are using is brought down.
iscsi_cleanup_conn_work_fn will check for this and exit early, but if the
cleanup_work is stuck behind other works, it might not get run until after
userspace has done ep_disconnect. Because the endpoint is not yet bound
there was no way for ep_disconnect to flush the work.
The bug of leaving stop_conns queued was added in:
Commit 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling")
and:
Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in
kernel space")
was supposed to fix it, but left this case.
This patch moves the conn state check to before we even queue the work so
we can avoid queueing.
Link: https://lore.kernel.org/r/20220408001314.5014-7-michael.christie@oracle.com
Fixes: 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space")
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c6e99c18167ed89729bf167ccb4a7e3ab3115ba ]
If iscsid is doing a stop_conn at the same time the kernel is starting
error recovery we can hit a race that allows the cleanup work to run on a
valid connection. In the race, iscsi_if_stop_conn sees the cleanup bit set,
but it calls flush_work on the clean_work before iscsi_conn_error_event has
queued it. The flush then returns before the queueing and so the
cleanup_work can run later and disconnect/stop a conn while it's in a
connected state.
The patch:
Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in
kernel space")
added the late stop_conn call bug originally, and the patch:
Commit 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling")
attempted to fix it but only fixed the normal EH case and left the above
race for the iscsid restart case. For the normal EH case we don't hit the
race because we only signal userspace to start recovery after we have done
the queueing, so the flush will always catch the queued work or see it
completed.
For iscsid restart cases like boot, we can hit the race because iscsid will
call down to the kernel before the kernel has signaled any error, so both
code paths can be running at the same time. This adds a lock around the
setting of the cleanup bit and queueing so they happen together.
Link: https://lore.kernel.org/r/20220408001314.5014-6-michael.christie@oracle.com
Fixes: 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space")
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0aadafb5c34403a7cced1a8d61877048dc059f70 ]
This patch fixes a bug where when using iSCSI offload we can free an
endpoint while userspace still thinks it's active. That then causes the
endpoint ID to be reused for a new connection's endpoint while userspace
still thinks the ID is for the original connection. Userspace will then end
up disconnecting a running connection's endpoint or trying to bind to
another connection's endpoint.
This bug is a regression added in:
Commit 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling")
where we added a in kernel ep_disconnect call to fix a bug in:
Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in
kernel space")
where we would call stop_conn without having done ep_disconnect. This early
ep_disconnect call will then free the endpoint and it's ID while userspace
still thinks the ID is valid.
Fix the early release of the ID by having the in kernel recovery code keep
a reference to the endpoint until userspace has called into the kernel to
finish cleaning up the endpoint/connection. It requires the previous commit
"scsi: iscsi: Release endpoint ID when its freed" which moved the freeing
of the ID until when the endpoint is released.
Link: https://lore.kernel.org/r/20220408001314.5014-5-michael.christie@oracle.com
Fixes: 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling")
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cbd2283aaf47fef4ded4b29124b1ef3beb515f3a ]
When userspace restarts during boot or upgrades it won't know about the
offload driver's endpoint and connection mappings. iscsid will start by
cleaning up the old session by doing a stop_conn call. Later, if we are
able to create a new connection, we clean up the old endpoint during the
binding stage. The problem is that if we do stop_conn before doing the
ep_disconnect call offload, drivers can still be executing I/O. We then
might free tasks from the under the card/driver.
This moves the ep_disconnect call to before we do the stop_conn call for
this case. It will then work and look like a normal recovery/cleanup
procedure from the driver's point of view.
Link: https://lore.kernel.org/r/20220408001314.5014-3-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c34f95e98d8fb750eefd4f3fe58b4f8b5e89253b ]
This patch moves iscsi_ep_disconnect() so it can be called earlier in the
next patch.
Link: https://lore.kernel.org/r/20220408001314.5014-2-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bcd8a45223470e00b5f254018174d64a75db4bbe ]
Executing driver on servers with more than 32 CPUs were faced with command
timeouts. This is because we were not geting completions for commands
submitted on IQ32 - IQ63.
Set E64Q bit to enable upper inbound and outbound queues 32 to 63 in the
MPI main configuration table.
Added 500ms delay after successful MPI initialization as mentioned in
controller datasheet.
Link: https://lore.kernel.org/r/20220411064603.668448-3-Ajish.Koshy@microchip.com
Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 294080eacf92a0781e6d43663448a55001ec8c64 ]
When upper inbound and outbound queues 32-63 are enabled, we see upper
vectors 32-63 in interrupt service routine. We need corresponding registers
to handle masking and unmasking of these upper interrupts.
To achieve this, we use registers MSGU_ODMR_U(0x34) to mask and
MSGU_ODMR_CLR_U(0x3C) to unmask the interrupts. In these registers bit 0-31
represents interrupt vectors 32-63.
Link: https://lore.kernel.org/r/20220411064603.668448-2-Ajish.Koshy@microchip.com
Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4049f7acef3eb37c1ea0df45f3ffc29404f4e708 upstream.
Add PCI ID and callbacks to support Intel Meteor Lake (MTL).
Link: https://lore.kernel.org/r/20220404055038.2208051-1-adrian.hunter@intel.com
Cc: stable@vger.kernel.org # v5.15+
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 87d663d40801dffc99a5ad3b0188ad3e2b4d1557 upstream.
The function mpt3sas_transport_port_remove() called in
_scsih_expander_node_remove() frees the port field of the sas_expander
structure, leading to the following use-after-free splat from KASAN when
the ioc_info() call following that function is executed (e.g. when doing
rmmod of the driver module):
[ 3479.371167] ==================================================================
[ 3479.378496] BUG: KASAN: use-after-free in _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.386936] Read of size 1 at addr ffff8881c037691c by task rmmod/1531
[ 3479.393524]
[ 3479.395035] CPU: 18 PID: 1531 Comm: rmmod Not tainted 5.17.0-rc8+ #1436
[ 3479.401712] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.1 06/02/2021
[ 3479.409263] Call Trace:
[ 3479.411743] <TASK>
[ 3479.413875] dump_stack_lvl+0x45/0x59
[ 3479.417582] print_address_description.constprop.0+0x1f/0x120
[ 3479.423389] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.429469] kasan_report.cold+0x83/0xdf
[ 3479.433438] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.439514] _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.445411] ? _raw_spin_unlock_irqrestore+0x2d/0x40
[ 3479.452032] scsih_remove+0x525/0xc90 [mpt3sas]
[ 3479.458212] ? mpt3sas_expander_remove+0x1d0/0x1d0 [mpt3sas]
[ 3479.465529] ? down_write+0xde/0x150
[ 3479.470746] ? up_write+0x14d/0x460
[ 3479.475840] ? kernfs_find_ns+0x137/0x310
[ 3479.481438] pci_device_remove+0x65/0x110
[ 3479.487013] __device_release_driver+0x316/0x680
[ 3479.493180] driver_detach+0x1ec/0x2d0
[ 3479.498499] bus_remove_driver+0xe7/0x2d0
[ 3479.504081] pci_unregister_driver+0x26/0x250
[ 3479.510033] _mpt3sas_exit+0x2b/0x6cf [mpt3sas]
[ 3479.516144] __x64_sys_delete_module+0x2fd/0x510
[ 3479.522315] ? free_module+0xaa0/0xaa0
[ 3479.527593] ? __cond_resched+0x1c/0x90
[ 3479.532951] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 3479.539607] ? syscall_enter_from_user_mode+0x21/0x70
[ 3479.546161] ? trace_hardirqs_on+0x1c/0x110
[ 3479.551828] do_syscall_64+0x35/0x80
[ 3479.556884] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 3479.563402] RIP: 0033:0x7f1fc482483b
...
[ 3479.943087] ==================================================================
Fix this by introducing the local variable port_id to store the port ID
value before executing mpt3sas_transport_port_remove(). This local variable
is then used in the call to ioc_info() instead of dereferencing the freed
port structure.
Link: https://lore.kernel.org/r/20220322055702.95276-1-damien.lemoal@opensource.wdc.com
Fixes: 7d310f241001 ("scsi: mpt3sas: Get device objects using sas_address & portID")
Cc: stable@vger.kernel.org
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bfb7789bcbd901caead43861461bc8f334c90d3b ]
The list iterator is always non-NULL so the check 'if (!rgn)' is always
false and the dev_err() is never called. Move the check outside the loop
and determine if 'victim_rgn' is NULL, to fix this bug.
Link: https://lore.kernel.org/r/20220320150733.21824-1-xiam0nd.tong@gmail.com
Fixes: 4b5f49079c52 ("scsi: ufs: ufshpb: L2P map management for HPB read")
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 16ed828b872d12ccba8f07bcc446ae89ba662f9c ]
The error handling path of the probe releases a resource that is not freed
in the remove function. In some cases, a ioremap() must be undone.
Add the missing iounmap() call in the remove function.
Link: https://lore.kernel.org/r/247066a3104d25f9a05de8b3270fc3c848763bcc.1647673264.git.christophe.jaillet@wanadoo.fr
Fixes: 45804fbb00ee ("[SCSI] 53c700: Amiga Zorro NCR53c710 SCSI")
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eaba83b5b8506bbc9ee7ca2f10aeab3fff3719e7 ]
In commit edb854a3680b ("scsi: core: Reallocate device's budget map on
queue depth change"), the sbitmap for the device budget map may be
reallocated after the slave device depth is configured.
When the sbitmap is reallocated we use the result from
scsi_device_max_queue_depth() for the sbitmap size, but don't resize to
match the actual device queue depth.
Fix by resizing the sbitmap after reallocating the budget sbitmap. We do
this instead of init'ing the sbitmap to the device queue depth as the user
may want to change the queue depth later via sysfs or other.
Link: https://lore.kernel.org/r/1647423870-143867-1-git-send-email-john.garry@huawei.com
Fixes: edb854a3680b ("scsi: core: Reallocate device's budget map on queue depth change")
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bc5519c18a32ce855bb51b9f5eceb77a9489d080 ]
Commit 2e27f576abc6 ("scsi: scsi_ioctl: Call scsi_cmd_ioctl() from
scsi_ioctl()") seems to have a typo as it is checking ret instead of cmd in
the if statement checking for CDROMCLOSETRAY and CDROMEJECT. This changes
the behaviour of these ioctls as the cdrom_ioctl handling of these is more
restrictive than the scsi_ioctl version.
Link: https://lore.kernel.org/r/20220323002242.21157-1-kgroeneveld@lenbrook.com
Fixes: 2e27f576abc6 ("scsi: scsi_ioctl: Call scsi_cmd_ioctl() from scsi_ioctl()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 271add11994ba1a334859069367e04d2be2ebdd4 ]
fc_exch_release(ep) will decrease the ep's reference count. When the
reference count reaches zero, it is freed. But ep is still used in the
following code, which will lead to a use after free.
Return after the fc_exch_release() call to avoid use after free.
Link: https://lore.kernel.org/r/20220303015115.459778-1-niejianglei2021@163.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 286ce4c65fbdf5eb9d4d5f4e4997c4e32bf1b073 ]
Add a file operation for "cnt" file under bist directory, so users can only
read "cnt" or clear "cnt" to zero, but cannot randomly modify.
Link: https://lore.kernel.org/r/1645703489-87194-6-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 554fb72ee34f4732c7f694f56c3c6e67790352a0 ]
If the driver probe fails to request the channel IRQ or fatal IRQ, the
driver will free the IRQ vectors before freeing the IRQs in free_irq(),
and this will cause a kernel BUG like this:
------------[ cut here ]------------
kernel BUG at drivers/pci/msi.c:369!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Call trace:
free_msi_irqs+0x118/0x13c
pci_disable_msi+0xfc/0x120
pci_free_irq_vectors+0x24/0x3c
hisi_sas_v3_probe+0x360/0x9d0 [hisi_sas_v3_hw]
local_pci_probe+0x44/0xb0
work_for_cpu_fn+0x20/0x34
process_one_work+0x1d0/0x340
worker_thread+0x2e0/0x460
kthread+0x180/0x190
ret_from_fork+0x10/0x20
---[ end trace b88990335b610c11 ]---
So we use devm_add_action() to control the order in which we free the
vectors.
Link: https://lore.kernel.org/r/1645703489-87194-4-git-send-email-john.garry@huawei.com
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cc8294ec4738d25e2bb2d71f7d82a9bf7f4a157b ]
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; doing so just pollutes init's
environment with strings that are not init arguments/parameters).
Return 1 from aha152x_setup() to indicate that the boot option has been
handled.
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lore.kernel.org/r/20220223000623.5920-1-rdunlap@infradead.org
Cc: "Juergen E. Fischer" <fischer@norbit.de>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f792a3629f4c4aa4c3703d66b43ce1edcc3ec09a ]
In pm8001_chip_fw_flash_update_build(), if
pm8001_chip_fw_flash_update_build() fails, the struct fw_control_ex
allocated must be freed.
Link: https://lore.kernel.org/r/20220220031810.738362-23-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4c8f04b1905cd4b776d0b720463c091545478ef7 ]
In pm8001_chip_set_dev_state_req(), pm8001_chip_fw_flash_update_req(),
pm80xx_chip_phy_ctl_req() and pm8001_chip_reg_dev_req() add missing calls
to pm8001_tag_free() to free the allocated tag when pm8001_mpi_build_cmd()
fails.
Similarly, in pm8001_exec_internal_task_abort(), if the chip ->task_abort
method fails, the tag allocated for the abort request task must be
freed. Add the missing call to pm8001_tag_free().
Link: https://lore.kernel.org/r/20220220031810.738362-22-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f90a74892f3acf0cdec5844e90fc8686ca13e7d7 ]
In pm8001_send_abort_all(), make sure to free the allocated sas task
if pm8001_tag_alloc() or pm8001_mpi_build_cmd() fail.
Link: https://lore.kernel.org/r/20220220031810.738362-21-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7e6b7e740addcea450041b5be8e42f0a4ceece0f ]
The call to pm8001_ccb_task_free() at the end of
pm8001_mpi_task_abort_resp() already frees the ccb tag. So when the device
NCQ_ABORT_ALL_FLAG is set, the tag should not be freed again. Also change
the hardcoded 0xBFFFFFFF value to ~NCQ_ABORT_ALL_FLAG as it ought to be.
Link: https://lore.kernel.org/r/20220220031810.738362-19-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3762d8f6edcdb03994c919f9487fd6d336c06561 ]
The declaration of the local variable destination1 in pm80xx_pci_mem_copy()
as a pointer to a u32 results in the sparse warning:
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype]
got restricted __le32 [usertype]
Furthermore, the destination" argument of pm80xx_pci_mem_copy() is wrongly
declared with the const attribute.
Fix both problems by changing the type of the "destination" argument to
"__le32 *" and use this argument directly inside the pm80xx_pci_mem_copy()
function, thus removing the need for the destination1 local variable.
Link: https://lore.kernel.org/r/20220220031810.738362-6-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
Hannes Reinecke
Damien Le Moal
Manivannan Sadhasivam
Xiaomeng Tong
Gustavo A. R. Silva
Kiwoong Kim
Bart Van Assche
James Smart
Minghao Chi
Lv Ruyi
Gleb Chesnokov
Brian Bunker
Daejun Park
Tom Rix
Mike Christie
Peter Wang
Chandrakanth patil
Alexey Galakhov
Sreekanth Reddy
Tyrel Datwyler
Ajish Koshy
Adrian Hunter
Christophe JAILLET
John Garry
Kevin Groeneveld
Jianglei Nie
Xiang Chen
Qi Liu
Randy Dunlap