aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/scsi_transport_iscsi.c
AgeCommit message (Collapse)Author
2021-12-08scsi: iscsi: Unblock session then wake up error handlerMike Christie
[ Upstream commit a0c2f8b6709a9a4af175497ca65f93804f57b248 ] We can race where iscsi_session_recovery_timedout() has woken up the error handler thread and it's now setting the devices to offline, and session_recovery_timedout()'s call to scsi_target_unblock() is also trying to set the device's state to transport-offline. We can then get a mix of states. For the case where we can't relogin we want the devices to be in transport-offline so when we have repaired the connection __iscsi_unblock_session() can set the state back to running. Set the device state then call into libiscsi to wake up the error handler. Link: https://lore.kernel.org/r/20211105221048.6541-2-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-06scsi: iscsi: Adjust iface sysfs attr detectionBaokun Li
[ Upstream commit 4e28550829258f7dab97383acaa477bd724c0ff4 ] ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call into the driver, we might not match and return that we don't want attr visible in sysfs. Found in code review. Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection") Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28scsi: iscsi: Fix iface sysfs attr detectionMike Christie
[ Upstream commit e746f3451ec7f91dcc9fd67a631239c715850a34 ] A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when iscsi_iface_attr_is_visible tries to figure out the type by just checking the value, we can collide and return the wrong type. When we call into the driver we might not match and return that we don't want attr visible in sysfs. The patch fixes this by setting the type when we figure out what the param is. Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings") Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: iscsi: Add iscsi_cls_conn refcount helpersMike Christie
[ Upstream commit b1d19e8c92cfb0ded180ef3376c20e130414e067 ] There are a couple places where we could free the iscsi_cls_conn while it's still in use. This adds some helpers to get/put a refcount on the struct and converts an exiting user. Subsequent commits will then use the helpers to fix 2 bugs in the eh code. Link: https://lore.kernel.org/r/20210525181821.7617-11-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07scsi: iscsi: Verify lengths on passthrough PDUsChris Leech
commit f9dbdf97a5bd92b1a49cee3d591b55b11fd7a6d5 upstream. Open-iSCSI sends passthrough PDUs over netlink, but the kernel should be verifying that the provided PDU header and data lengths fall within the netlink message to prevent accessing beyond that in memory. Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07scsi: iscsi: Ensure sysfs attributes are limited to PAGE_SIZEChris Leech
commit ec98ea7070e94cc25a422ec97d1421e28d97b7ee upstream. As the iSCSI parameters are exported back through sysfs, it should be enforcing that they never are more than PAGE_SIZE (which should be more than enough) before accepting updates through netlink. Change all iSCSI sysfs attributes to use sysfs_emit(). Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07scsi: iscsi: Restrict sessions and handles to admin capabilitiesLee Duncan
commit 688e8128b7a92df982709a4137ea4588d16f24aa upstream. Protect the iSCSI transport handle, available in sysfs, by requiring CAP_SYS_ADMIN to read it. Also protect the netlink socket by restricting reception of messages to ones sent with CAP_SYS_ADMIN. This disables normal users from being able to end arbitrary iSCSI sessions. Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Chris Leech <cleech@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-03scsi: iscsi: Do not put host in iscsi_set_flashnode_param()Jing Xiangfeng
[ Upstream commit 68e12e5f61354eb42cfffbc20a693153fc39738e ] If scsi_host_lookup() fails we will jump to put_host which may cause a panic. Jump to exit_set_fnode instead. Link: https://lore.kernel.org/r/20200615081226.183068-1-jingxiangfeng@huawei.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-02scsi: iscsi: Report unbind session event when the target has been removedWu Bo
[ Upstream commit 13e60d3ba287d96eeaf1deaadba51f71578119a3 ] If the daemon is restarted or crashes while logging out of a session, the unbind session event sent by the kernel is not processed and is lost. When the daemon starts again, the session can't be unbound because the daemon is waiting for the event message. However, the kernel has already logged out and the event will not be resent. When iscsid restart is complete, logout session reports error: Logging out of session [sid: 6, target: iqn.xxxxx, portal: xx.xx.xx.xx,3260] iscsiadm: Could not logout of [sid: 6, target: iscsiadm -m node iqn.xxxxx, portal: xx.xx.xx.xx,3260]. iscsiadm: initiator reported error (9 - internal error) iscsiadm: Could not logout of all requested sessions Make sure the unbind event is emitted. [mkp: commit desc and applied by hand since patch was mangled] Link: https://lore.kernel.org/r/4eab1771-2cb3-8e79-b31c-923652340e99@huawei.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28scsi: iscsi: Don't destroy session if there are outstanding connectionsNick Black
[ Upstream commit 54155ed4199c7aa3fd20866648024ab63c96d579 ] A faulty userspace that calls destroy_session() before destroying the connections can trigger the failure. This patch prevents the issue by refusing to destroy the session if there are outstanding connections. ------------[ cut here ]------------ kernel BUG at mm/slub.c:306! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 1224 Comm: iscsid Not tainted 5.4.0-rc2.iscsi+ #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:__slab_free+0x181/0x350 [...] [ 1209.686056] RSP: 0018:ffffa93d4074fae0 EFLAGS: 00010246 [ 1209.686694] RAX: ffff934efa5ad800 RBX: 000000008010000a RCX: ffff934efa5ad800 [ 1209.687651] RDX: ffff934efa5ad800 RSI: ffffeb4041e96b00 RDI: ffff934efd402c40 [ 1209.688582] RBP: ffffa93d4074fb80 R08: 0000000000000001 R09: ffffffffbb5dfa26 [ 1209.689425] R10: ffff934efa5ad800 R11: 0000000000000001 R12: ffffeb4041e96b00 [ 1209.690285] R13: ffff934efa5ad800 R14: ffff934efd402c40 R15: 0000000000000000 [ 1209.691213] FS: 00007f7945dfb540(0000) GS:ffff934efda80000(0000) knlGS:0000000000000000 [ 1209.692316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1209.693013] CR2: 000055877fd3da80 CR3: 0000000077384000 CR4: 00000000000006e0 [ 1209.693897] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1209.694773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1209.695631] Call Trace: [ 1209.695957] ? __wake_up_common_lock+0x8a/0xc0 [ 1209.696712] iscsi_pool_free+0x26/0x40 [ 1209.697263] iscsi_session_teardown+0x2f/0xf0 [ 1209.698117] iscsi_sw_tcp_session_destroy+0x45/0x60 [ 1209.698831] iscsi_if_rx+0xd88/0x14e0 [ 1209.699370] netlink_unicast+0x16f/0x200 [ 1209.699932] netlink_sendmsg+0x21a/0x3e0 [ 1209.700446] sock_sendmsg+0x4f/0x60 [ 1209.700902] ___sys_sendmsg+0x2ae/0x320 [ 1209.701451] ? cp_new_stat+0x150/0x180 [ 1209.701922] __sys_sendmsg+0x59/0xa0 [ 1209.702357] do_syscall_64+0x52/0x160 [ 1209.702812] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1209.703419] RIP: 0033:0x7f7946433914 [...] [ 1209.706084] RSP: 002b:00007fffb99f2378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1209.706994] RAX: ffffffffffffffda RBX: 000055bc869eac20 RCX: 00007f7946433914 [ 1209.708082] RDX: 0000000000000000 RSI: 00007fffb99f2390 RDI: 0000000000000005 [ 1209.709120] RBP: 00007fffb99f2390 R08: 000055bc84fe9320 R09: 00007fffb99f1f07 [ 1209.710110] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000038 [ 1209.711085] R13: 000055bc8502306e R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace a2d933ede7f730d8 ]--- Link: https://lore.kernel.org/r/20191226203148.2172200-1-krisman@collabora.com Signed-off-by: Nick Black <nlb@google.com> Co-developed-by: Salman Qazi <sqazi@google.com> Signed-off-by: Salman Qazi <sqazi@google.com> Co-developed-by: Junho Ryu <jayr@google.com> Signed-off-by: Junho Ryu <jayr@google.com> Co-developed-by: Khazhismel Kumykov <khazhy@google.com> Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-29scsi: iscsi: Avoid potential deadlock in iscsi_if_rx funcBo Wu
commit bba340c79bfe3644829db5c852fdfa9e33837d6d upstream. In iscsi_if_rx func, after receiving one request through iscsi_if_recv_msg func, iscsi_if_send_reply will be called to try to reply to the request in a do-while loop. If the iscsi_if_send_reply function keeps returning -EAGAIN, a deadlock will occur. For example, a client only send msg without calling recvmsg func, then it will result in the watchdog soft lockup. The details are given as follows: sock_fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_ISCSI); retval = bind(sock_fd, (struct sock addr*) & src_addr, sizeof(src_addr); while (1) { state_msg = sendmsg(sock_fd, &msg, 0); //Note: recvmsg(sock_fd, &msg, 0) is not processed here. } close(sock_fd); watchdog: BUG: soft lockup - CPU#7 stuck for 22s! [netlink_test:253305] Sample time: 4000897528 ns(HZ: 250) Sample stat: curr: user: 675503481560, nice: 321724050, sys: 448689506750, idle: 4654054240530, iowait: 40885550700, irq: 14161174020, softirq: 8104324140, st: 0 deta: user: 0, nice: 0, sys: 3998210100, idle: 0, iowait: 0, irq: 1547170, softirq: 242870, st: 0 Sample softirq: TIMER: 992 SCHED: 8 Sample irqstat: irq 2: delta 1003, curr: 3103802, arch_timer CPU: 7 PID: 253305 Comm: netlink_test Kdump: loaded Tainted: G OE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO) pc : __alloc_skb+0x104/0x1b0 lr : __alloc_skb+0x9c/0x1b0 sp : ffff000033603a30 x29: ffff000033603a30 x28: 00000000000002dd x27: ffff800b34ced810 x26: ffff800ba7569f00 x25: 00000000ffffffff x24: 0000000000000000 x23: ffff800f7c43f600 x22: 0000000000480020 x21: ffff0000091d9000 x20: ffff800b34eff200 x19: ffff800ba7569f00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0001000101000100 x13: 0000000101010000 x12: 0101000001010100 x11: 0001010101010001 x10: 00000000000002dd x9 : ffff000033603d58 x8 : ffff800b34eff400 x7 : ffff800ba7569200 x6 : ffff800b34eff400 x5 : 0000000000000000 x4 : 00000000ffffffff x3 : 0000000000000000 x2 : 0000000000000001 x1 : ffff800b34eff2c0 x0 : 0000000000000300 Call trace: __alloc_skb+0x104/0x1b0 iscsi_if_rx+0x144/0x12bc [scsi_transport_iscsi] netlink_unicast+0x1e0/0x258 netlink_sendmsg+0x310/0x378 sock_sendmsg+0x4c/0x70 sock_write_iter+0x90/0xf0 __vfs_write+0x11c/0x190 vfs_write+0xac/0x1c0 ksys_write+0x6c/0xd8 __arm64_sys_write+0x24/0x30 el0_svc_common+0x78/0x130 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6915E3D4D2@dggeml505-mbx.china.huawei.com Signed-off-by: Bo Wu <wubo40@huawei.com> Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-20scsi: iscsi: flush running unbind operations when removing a sessionMaurizio Lombardi
[ Upstream commit 165aa2bfb42904b1bec4bf2fa257c8c603c14a06 ] In some cases, the iscsi_remove_session() function is called while an unbind_work operation is still running. This may cause a situation where sysfs objects are removed in an incorrect order, triggering a kernel warning. [ 605.249442] ------------[ cut here ]------------ [ 605.259180] sysfs group 'power' not found for kobject 'target2:0:0' [ 605.321371] WARNING: CPU: 1 PID: 26794 at fs/sysfs/group.c:235 sysfs_remove_group+0x76/0x80 [ 605.341266] Modules linked in: dm_service_time target_core_user target_core_pscsi target_core_file target_core_iblock iscsi_target_mod target_core_mod nls_utf8 isofs ppdev bochs_drm nfit ttm libnvdimm drm_kms_helper syscopyarea sysfillrect sysimgblt joydev pcspkr fb_sys_fops drm i2c_piix4 sg parport_pc parport xfs libcrc32c dm_multipath sr_mod sd_mod cdrom ata_generic 8021q garp mrp ata_piix stp crct10dif_pclmul crc32_pclmul llc libata crc32c_intel virtio_net net_failover ghash_clmulni_intel serio_raw failover sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi [ 605.627479] CPU: 1 PID: 26794 Comm: kworker/u32:2 Not tainted 4.18.0-60.el8.x86_64 #1 [ 605.721401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014 [ 605.823651] Workqueue: scsi_wq_2 __iscsi_unbind_session [scsi_transport_iscsi] [ 605.830940] RIP: 0010:sysfs_remove_group+0x76/0x80 [ 605.922907] Code: 48 89 df 5b 5d 41 5c e9 38 c4 ff ff 48 89 df e8 e0 bf ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 38 73 cb a7 e8 24 77 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 41 56 41 55 41 54 55 [ 606.122304] RSP: 0018:ffffbadcc8d1bda8 EFLAGS: 00010286 [ 606.218492] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 606.326381] RDX: ffff98bdfe85eb40 RSI: ffff98bdfe856818 RDI: ffff98bdfe856818 [ 606.514498] RBP: ffffffffa7ab73e0 R08: 0000000000000268 R09: 0000000000000007 [ 606.529469] R10: 0000000000000000 R11: ffffffffa860d9ad R12: ffff98bdf978e838 [ 606.630535] R13: ffff98bdc2cd4010 R14: ffff98bdc2cd3ff0 R15: ffff98bdc2cd4000 [ 606.824707] FS: 0000000000000000(0000) GS:ffff98bdfe840000(0000) knlGS:0000000000000000 [ 607.018333] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 607.117844] CR2: 00007f84b78ac024 CR3: 000000002c00a003 CR4: 00000000003606e0 [ 607.117844] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 607.420926] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 607.524236] Call Trace: [ 607.530591] device_del+0x56/0x350 [ 607.624393] ? ata_tlink_match+0x30/0x30 [libata] [ 607.727805] ? attribute_container_device_trigger+0xb4/0xf0 [ 607.829911] scsi_target_reap_ref_release+0x39/0x50 [ 607.928572] scsi_remove_target+0x1a2/0x1d0 [ 608.017350] __iscsi_unbind_session+0xb3/0x160 [scsi_transport_iscsi] [ 608.117435] process_one_work+0x1a7/0x360 [ 608.132917] worker_thread+0x30/0x390 [ 608.222900] ? pwq_unbound_release_workfn+0xd0/0xd0 [ 608.323989] kthread+0x112/0x130 [ 608.418318] ? kthread_bind+0x30/0x30 [ 608.513821] ret_from_fork+0x35/0x40 [ 608.613909] ---[ end trace 0b98c310c8a6138c ]--- Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-06-21scsi: iscsi: respond to netlink with unicast when appropriateChris Leech
[ Upstream commit af17092810a887178195276255b7b31f8fbe7dbe ] Instead of always multicasting responses, send a unicast netlink message directed at the correct pid. This will be needed if we ever want to support multiple userspace processes interacting with the kernel over iSCSI netlink simultaneously. Limitations can currently be seen if you attempt to run multiple iscsistart commands in parallel. We've fixed up the userspace issues in iscsistart that prevented multiple instances from running, so now attempts to speed up booting by bringing up multiple iscsi sessions at once in the initramfs are just running into misrouted responses that this fixes. Signed-off-by: Chris Leech <cleech@redhat.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-02scsi: libiscsi: Remove iscsi_destroy_sessionKhazhismel Kumykov
iscsi_session_teardown was the only user of this function. Function currently is just short for iscsi_remove_session + iscsi_free_session. Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Acked-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-09-25scsi: scsi_transport_iscsi: fix the issue that iscsi_if_rx doesn't parse ↵Xin Long
nlmsg properly ChunYu found a kernel crash by syzkaller: [ 651.617875] kasan: CONFIG_KASAN_INLINE enabled [ 651.618217] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 651.618731] general protection fault: 0000 [#1] SMP KASAN [ 651.621543] CPU: 1 PID: 9539 Comm: scsi Not tainted 4.11.0.cov #32 [ 651.621938] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 651.622309] task: ffff880117780000 task.stack: ffff8800a3188000 [ 651.622762] RIP: 0010:skb_release_data+0x26c/0x590 [...] [ 651.627260] Call Trace: [ 651.629156] skb_release_all+0x4f/0x60 [ 651.629450] consume_skb+0x1a5/0x600 [ 651.630705] netlink_unicast+0x505/0x720 [ 651.632345] netlink_sendmsg+0xab2/0xe70 [ 651.633704] sock_sendmsg+0xcf/0x110 [ 651.633942] ___sys_sendmsg+0x833/0x980 [ 651.637117] __sys_sendmsg+0xf3/0x240 [ 651.638820] SyS_sendmsg+0x32/0x50 [ 651.639048] entry_SYSCALL_64_fastpath+0x1f/0xc2 It's caused by skb_shared_info at the end of sk_buff was overwritten by ISCSI_KEVENT_IF_ERROR when parsing nlmsg info from skb in iscsi_if_rx. During the loop if skb->len == nlh->nlmsg_len and both are sizeof(*nlh), ev = nlmsg_data(nlh) will acutally get skb_shinfo(SKB) instead and set a new value to skb_shinfo(SKB)->nr_frags by ev->type. This patch is to fix it by checking nlh->nlmsg_len properly there to avoid over accessing sk_buff. Reported-by: ChunYu Wang <chunwang@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-29scsi: bsg-lib: pass the release callback through bsg_setup_queueChristoph Hellwig
The SAS code will need it. Also mark the name argument const to match bsg_register_queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: make device_type constBhumika Goyal
Make these const as they are only stored in the type field of a device structure, which is const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-27scsi: scsi_transport_iscsi: Use flush_work in iscsi_remove_sessionJitendra Bhivare
scsi_flush_work flushes workqueue for the Scsi_Host. In iSCSI offload enabled host, this would wait for all other sessions under the host. Use flush_work for the session being removed instead. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-27block/bsg: move queue creation into bsg_setup_queueChristoph Hellwig
Simply the boilerplate code needed for bsg nodes a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27scsi: remove __scsi_alloc_queueChristoph Hellwig
Instead do an internal export of __scsi_init_queue for the transport classes that export BSG nodes. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-11scsi_transport_iscsi: Declare local symbols staticBart Van Assche
Avoid that building with W=1 causes gcc to report warnings about symbols that have not been declared. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-11scsi_transport_iscsi: Unexport iscsi_is_flashnode_conn_dev()Bart Van Assche
The output of "git grep -nHw iscsi_is_flashnode_conn_dev" shows that this function is only called from inside source file drivers/scsi/scsi_transport_iscsi.c. Hence unexport this function. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-11scsi_transport_iscsi: Remove set-but-not-used variablesBart Van Assche
Avoid that building with W=1 causes gcc to report warnings about set-but-not-used variables. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-11scsi: disable automatic target scanHannes Reinecke
On larger installations it is useful to disable automatic LUN scanning, and only add the required LUNs via udev rules. This can speed up bootup dramatically. This patch introduces a new scan module parameter value 'manual', which works like 'none', but can be overridden by setting the 'rescan' value from scsi_scan_target to 'SCSI_SCAN_MANUAL'. And it updates all relevant callers to set the 'rescan' value to 'SCSI_SCAN_MANUAL' if invoked via the 'scan' option in sysfs. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_transport_iscsi: Add 25G and 40G speed definitionJitendra Bhivare
iscsi_port_speed and iscsi_port_speed_names have new entries for 25Gbps and 40Gbps link speeds. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-09-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "This includes one new driver: cxlflash plus the usual grab bag of updates for the major drivers: qla2xxx, ipr, storvsc, pm80xx, hptiop, plus a few assorted fixes. There's another tranch coming, but I want to incubate it another few days in the checkers, plus it includes a mpt2sas separated lifetime fix, which Avago won't get done testing until Friday" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (85 commits) aic94xx: set an error code on failure storvsc: Set the error code correctly in failure conditions storvsc: Allow write_same when host is windows 10 storvsc: use storage protocol version to determine storage capabilities storvsc: use correct defaults for values determined by protocol negotiation storvsc: Untangle the storage protocol negotiation from the vmbus protocol negotiation. storvsc: Use a single value to track protocol versions storvsc: Rather than look for sets of specific protocol versions, make decisions based on ranges. cxlflash: Remove unused variable from queuecommand cxlflash: shift wrapping bug in afu_link_reset() cxlflash: off by one bug in cxlflash_show_port_status() cxlflash: Virtual LUN support cxlflash: Superpipe support cxlflash: Base error recovery support qla2xxx: Update driver version to 8.07.00.26-k qla2xxx: Add pci device id 0x2261. qla2xxx: Fix missing device login retries. qla2xxx: do not clear slot in outstanding cmd array qla2xxx: Remove decrement of sp reference count in abort handler. qla2xxx: Add support to show MPI and PEP FW version for ISP27xx. ...
2015-08-07[SCSI] Fix printk typos in drivers/scsiMasanari Iida
This patch fix spme spelling typos in printk within drivers/scsi. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-07-30iSCSI: let session recovery_tmo sysfs writes persist across recoveryChris Leech
The iSCSI session recovery_tmo setting is writeable in sysfs, but it's also set every time a connection is established when parameters are set from iscsid over netlink. That results in the timeout being reset to the default value after every recovery. The DM multipath tools want to use the sysfs interface to lower the default timeout when there are multiple paths to fail over. It has caused confusion that we have a writeable sysfs value that seem to keep resetting itself. This patch adds an in-kernel flag that gets set once a sysfs write occurs, and then ignores netlink parameter setting once it's been modified via the sysfs interface. My thinking here is that the sysfs interface is much simpler for external tools to influence the session timeout, but if we're going to allow it to be modified directly we should ensure that setting is maintained. Signed-off-by: Chris Leech <cleech@redhat.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-02iscsi: Fix iscsi endpoints leakSagi Grimberg
When creating a new endpoint, we look for a free id for the new endpoint. We baisically loop on possible ids and use the first id that class_find_device() returns NULL. However, we are missing a reference put when class_find_device() does find an existing device for a given id. Reported-by: Alex Lyakas <alex@zadarastorage.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2014-08-04iscsi class: Fix freeing of skb in get host error pathMike Christie
If get_host_stats failes we are using kfree to free the skb. We should be using kfree_skb. This patch was made over Christoph's scsi-queue drivers-for-3.17 branch. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-01iscsi class: fix get_host_stats return code when not supportedMike Christie
When the get_host_stats call was not supported we were returing EINVAL. This has us return ENOSYS, because for software iscsi drivers where there is no host it is ok to not have this callout. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-01iscsi class: fix get_host_stats error handlingMike Christie
iscsi_get_host_stats was dropping the error code returned by drivers like qla4xxx. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25iscsi: kill redundant castsNick Black' via open-iscsi
Remove two redundant casts from char * to char *. Signed-off-by: Nick Black <nlb@google.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-17scsi: use 64-bit LUNsHannes Reinecke
The SCSI standard defines 64-bit values for LUNs, and large arrays employing large or hierarchical LUN numbers become more and more common. So update the linux SCSI stack to use 64-bit LUN numbers. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-02-20Merge branch 'master' into for-nextJiri Kosina
2014-02-19treewide: Fix typo in Documentation/DocBookMasanari Iida
This patch fix spelling typo in Documentation/DocBook. It is because .html and .xml files are generated by make htmldocs, I have to fix a typo within the source files. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-19[SCSI] scsi_transport_iscsi: Export ISCSI_PARAM_LOCAL_IPADDR attr for ↵Adheer Chandravanshi
iscsi_connection This attribute specifies the local IP address used to establish connection. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] scsi_transport_iscsi: Add host statistics supportLalit Chandivade
Add transport_iscsi hooks to get aggregate host statistics. The statistics include MAC, TCP/IP & iSCSI statistics. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-16[SCSI] iscsi_transport: Additional parameters for network settingsHarish Zunjarrao
Added support to display and update additional network parameters through iscsiadm. Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] scsi_transport_iscsi: Add support to set CHAP entriesAdheer Chandravanshi
For offload iSCSI like qla4xxx, CHAP entries are stored in adapter's flash. This patch adds support to add/update CHAP entries in adapter's flash using iscsi tools, like Open-iSCSI. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] scsi_transport_iscsi: Exporting new attrs for iscsi session and ↵Adheer Chandravanshi
connection in sysfs Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-26[SCSI] libiscsi: Added new boot entries in the session sysfsEddie Wai
This is the kernel part of the modification to extract the net params from the ibft sysfs to the iface struct used for the connection request upon sync_session in the open-iscsi util. Three new session sysfs params are defined: boot_root - holds the name of the /sys/firmware/ibft or iscsi_rootN boot_nic - holds the ethernetN name boot_target - holds the targetN name Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are usedMike Christie
This fixes a bug where the iscsi class/driver did not do a put_device when a sess/conn device was found. This also simplifies the interface by not having to pass in some arguments that were duplicated and did not need to be exported. Reported-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] scsi_transport_iscsi: fix error return code in iscsi_transport_init()Wei Yongjun
Fix to return -ENOMEM in the create workqueue error case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights (1721 non-merge commits, this has to be a record of some sort): 1) Add 'random' mode to team driver, from Jiri Pirko and Eric Dumazet. 2) Make it so that any driver that supports configuration of multiple MAC addresses can provide the forwarding database add and del calls by providing a default implementation and hooking that up if the driver doesn't have an explicit set of handlers. From Vlad Yasevich. 3) Support GSO segmentation over tunnels and other encapsulating devices such as VXLAN, from Pravin B Shelar. 4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton. 5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita Dukkipati. 6) In the PHY layer, allow supporting wake-on-lan in situations where the PHY registers have to be written for it to be configured. Use it to support wake-on-lan in mv643xx_eth. From Michael Stapelberg. 7) Significantly improve firewire IPV6 support, from YOSHIFUJI Hideaki. 8) Allow multiple packets to be sent in a single transmission using network coding in batman-adv, from Martin Hundebøll. 9) Add support for T5 cxgb4 chips, from Santosh Rastapur. 10) Generalize the VXLAN forwarding tables so that there is more flexibility in configurating various aspects of the endpoints. From David Stevens. 11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver, from Dmitry Kravkov. 12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo Neira Ayuso. 13) Start adding networking selftests. 14) In situations of overload on the same AF_PACKET fanout socket, or per-cpu packet receive queue, minimize drop by distributing the load to other cpus/fanouts. From Willem de Bruijn and Eric Dumazet. 15) Add support for new payload offset BPF instruction, from Daniel Borkmann. 16) Convert several drivers over to mdoule_platform_driver(), from Sachin Kamat. 17) Provide a minimal BPF JIT image disassembler userspace tool, from Daniel Borkmann. 18) Rewrite F-RTO implementation in TCP to match the final specification of it in RFC4138 and RFC5682. From Yuchung Cheng. 19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear you like netlink, so I implemented netlink dumping of netlink sockets.") From Andrey Vagin. 20) Remove ugly passing of rtnetlink attributes into rtnl_doit functions, from Thomas Graf. 21) Allow userspace to be able to see if a configuration change occurs in the middle of an address or device list dump, from Nicolas Dichtel. 22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes Frederic Sowa. 23) Increase accuracy of packet length used by packet scheduler, from Jason Wang. 24) Beginning set of changes to make ipv4/ipv6 fragment handling more scalable and less susceptible to overload and locking contention, from Jesper Dangaard Brouer. 25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*() instead. From Hong Zhiguo. 26) Optimize route usage in IPVS by avoiding reference counting where possible, from Julian Anastasov. 27) Convert IPVS schedulers to RCU, also from Julian Anastasov. 28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger Eitzenberger. 29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG, nfnetlink_log, and nfnetlink_queue. From Gao feng. 30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa. 31) Support several new r8169 chips, from Hayes Wang. 32) Support tokenized interface identifiers in ipv6, from Daniel Borkmann. 33) Use usbnet_link_change() helper in USB net driver, from Ming Lei. 34) Add 802.1ad vlan offload support, from Patrick McHardy. 35) Support mmap() based netlink communication, also from Patrick McHardy. 36) Support HW timestamping in mlx4 driver, from Amir Vadai. 37) Rationalize AF_PACKET packet timestamping when transmitting, from Willem de Bruijn and Daniel Borkmann. 38) Bring parity to what's provided by /proc/net/packet socket dumping and the info provided by netlink socket dumping of AF_PACKET sockets. From Nicolas Dichtel. 39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin Poirier" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) filter: fix va_list build error af_unix: fix a fatal race with bit fields bnx2x: Prevent memory leak when cnic is absent bnx2x: correct reading of speed capabilities net: sctp: attribute printl with __printf for gcc fmt checks netlink: kconfig: move mmap i/o into netlink kconfig netpoll: convert mutex into a semaphore netlink: Fix skb ref counting. net_sched: act_ipt forward compat with xtables mlx4_en: fix a build error on 32bit arches Revert "bnx2x: allow nvram test to run when device is down" bridge: avoid OOPS if root port not found drivers: net: cpsw: fix kernel warn on cpsw irq enable sh_eth: use random MAC address if no valid one supplied 3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA) tg3: fix to append hardware time stamping flags unix/stream: fix peeking with an offset larger than data in queue unix/dgram: fix peeking with an offset larger than data in queue unix/dgram: peek beyond 0-sized skbs openvswitch: Remove unneeded ovs_netdev_get_ifindex() ...
2013-04-11[SCSI] scsi_transport_iscsi: Add flash node mgmt supportAdheer Chandravanshi
This patch allows iscsiadm to manage iSCSI target information stored on adapter flash on per host basis. The sysfs entries will look as cited below: /sys/bus/iscsi_flashnode/devices/flashnode_sess-<host_no>:<flashnode_id>/<session attrs> /sys/bus/iscsi_flashnode/devices/flashnode_conn-<host_no>:<flashnode_id>:<conn_id>/<conn attrs> Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-03-28scsi: replace obsolete NLMSG_* with type safe nlmsg_*Hong zhi guo
Signed-off-by: Hong Zhiguo <honkiko@gmail.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "The patch set is mostly driver updates (bnx2fc, ipr, lpfc, qla4) and a few bug fixes" Pull delayed because google hates James, and sneakily considers his pull requests spam. Why, google, why? * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (60 commits) [SCSI] aacraid: 1024 max outstanding command support for Series 7 and above [SCSI] bnx2fc: adjust duplicate test [SCSI] qla4xxx: Update driver version to 5.03.00-k4 [SCSI] qla4xxx: Fix return code for qla4xxx_session_get_param. [SCSI] qla4xxx: wait for boot target login response during probe. [SCSI] qla4xxx: Added support for force firmware dump [SCSI] qla4xxx: Re-register IRQ handler while retrying initialize of adapter [SCSI] qla4xxx: Throttle active IOCBs to firmware limits [SCSI] qla4xxx: Remove unnecessary code from qla4xxx_init_local_data [SCSI] qla4xxx: Quiesce driver activities while loopback [SCSI] qla4xxx: Rename MBOX_ASTS_IDC_NOTIFY to MBOX_ASTS_IDC_REQUEST_NOTIFICATION [SCSI] qla4xxx: Add spurious interrupt messages under debug level 2 [SCSI] cxgb4i: Remove the scsi host device when removing device [SCSI] bfa: fix strncpy() limiter in bfad_start_ops() [SCSI] qla4xxx: Update driver version to 5.03.00-k3 [SCSI] qla4xxx: Correct the validation to check in get_sys_info mailbox [SCSI] qla4xxx: Pass correct function param to qla4_8xxx_rd_direct [SCSI] lpfc 8.3.37: Update lpfc version for 8.3.37 driver release [SCSI] lpfc 8.3.37: Fixed infinite loop in lpfc_sli4_fcf_rr_next_index_get. [SCSI] lpfc 8.3.37: Fixed crash due to SLI Port invalid resource count ...
2013-02-06driver-core: constify data for class_find_device()Michał Mirosław
All in-kernel users of class_find_device() don't really need mutable data for match callback. In two places (kernel/power/suspend_test.c, drivers/scsi/osd/osd_uld.c) this patch changes match callbacks to use const search data. The const is propagated to rtc_class_open() and power_supply_get_by_name() parameters. Note that there's a dev reference leak in suspend_test.c that's not touched in this patch. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-29[SCSI] scsi_transport_iscsi: export iscsi class session's target_id in sysfs.Manish Rangankar
Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-18 03:20:48 +0000