summaryrefslogtreecommitdiffstats
path: root/drivers/regulator
AgeCommit message (Collapse)Author
2021-06-16regulator: max77620: Use device_set_of_node_from_dev()Dmitry Osipenko
commit 6f55c5dd1118b3076d11d9cb17f5c5f4bc3a1162 upstream. The MAX77620 driver fails to re-probe on deferred probe because driver core tries to claim resources that are already claimed by the PINCTRL device. Use device_set_of_node_from_dev() helper which marks OF node as reused, skipping erroneous execution of pinctrl_bind_pins() for the PMIC device on the re-probe. Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210523224243.13219-2-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16regulator: core: resolve supply for boot-on/always-on regulatorsDmitry Baryshkov
commit 98e48cd9283dbac0e1445ee780889f10b3d1db6a upstream. For the boot-on/always-on regulators the set_machine_constrainst() is called before resolving rdev->supply. Thus the code would try to enable rdev before enabling supplying regulator. Enforce resolving supply regulator before enabling rdev. Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210519221224.2868496-1-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14regulator: bd9571mwv: Fix AVS and DVFS voltage rangeGeert Uytterhoeven
[ Upstream commit 3b6e7088afc919f5b52e4d2de8501ad34d35b09b ] According to Table 30 ("DVFS_MoniVDAC [6:0] Setting Table") in the BD9571MWV-M Datasheet Rev. 002, the valid voltage range is 600..1100 mV (settings 0x3c..0x6e). While the lower limit is taken into account (by setting regulator_desc.linear_min_sel to 0x3c), the upper limit is not. Fix this by reducing regulator_desc.n_voltages from 0x80 to 0x6f. Fixes: e85c5a153fe237f2 ("regulator: Add ROHM BD9571MWV-M PMIC regulator driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210312130242.3390038-2-geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04regulator: s5m8767: Drop regulators OF node referenceKrzysztof Kozlowski
[ Upstream commit a5872bd3398d0ff2ce4c77794bc7837899c69024 ] The device node reference obtained with of_get_child_by_name() should be dropped on error paths. Fixes: 26aec009f6b6 ("regulator: add device tree support for s5m8767") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20210121155914.48034-1-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04regulator: axp20x: Fix reference cout leakPan Bian
[ Upstream commit e78bf6be7edaacb39778f3a89416caddfc6c6d70 ] Decrements the reference count of device node and its child node. Fixes: dfe7a1b058bb ("regulator: AXP20x: Add support for regulators subsystem") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210120123313.107640-1-bianpan2016@163.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13regulator: Fix lockdep warning resolving suppliesMark Brown
[ Upstream commit 14a71d509ac809dcf56d7e3ca376b15d17bd0ddd ] With commit eaa7995c529b54 (regulator: core: avoid regulator_resolve_supply() race condition) we started holding the rdev lock while resolving supplies, an operation that requires holding the regulator_list_mutex. This results in lockdep warnings since in other places we take the list mutex then the mutex on an individual rdev. Since the goal is to make sure that we don't call set_supply() twice rather than a concern about the cost of resolution pull the rdev lock and check for duplicate resolution down to immediately before we do the set_supply() and drop it again once the allocation is done. Fixes: eaa7995c529b54 (regulator: core: avoid regulator_resolve_supply() race condition) Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210122132042.10306-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13regulator: core: Clean enabling always-on regulators + their suppliesDouglas Anderson
[ Upstream commit 05f224ca669398b567d09feb6e2ceefcb7d7f945 ] At the end of regulator_resolve_supply() we have historically turned on our supply in some cases. This could be for one of two reasons: 1. If resolving supplies was happening before the call to set_machine_constraints() we needed to predict if set_machine_constraints() was going to turn the regulator on and we needed to preemptively turn the supply on. 2. Maybe set_machine_constraints() happened before we could resolve supplies (because we failed the first time to resolve) and thus we might need to propagate an enable that already happened up to our supply. Historically regulator_resolve_supply() used _regulator_is_enabled() to decide whether to turn on the supply. Let's change things a little bit. Specifically: 1. Let's try to enable the supply and the regulator in the same place, both in set_machine_constraints(). This means that we have exactly the same logic for enabling the supply and the regulator. 2. Let's properly set use_count when we enable always-on or boot-on regulators even for those that don't have supplies. The previous commit 1fc12b05895e ("regulator: core: Avoid propagating to supplies when possible") only did this right for regulators with supplies. 3. Let's make it clear that the only time we need to enable the supply in regulator_resolve_supply() is if the main regulator is currently in use. By using use_count (like the rest of the code) to decide if we're going to enable our supply we keep everything consistent. Overall the new scheme should be cleaner and easier to reason about. In addition to fixing regulator_summary to be more correct (because of the more correct use_count), this change also has the effect of no longer using _regulator_is_enabled() in this code path. _regulator_is_enabled() could return an error code for some regulators at bootup (like RPMh) that can't read their initial state. While one can argue that the design of those regulators is sub-optimal, the new logic sidesteps this brokenness. This fix in particular fixes observed problems on Qualcomm sdm845 boards which use the above-mentioned RPMh regulator. Those problems were made worse by commit 1fc12b05895e ("regulator: core: Avoid propagating to supplies when possible") because now we'd think at bootup that the SD regulators were already enabled and we'd never try them again. Fixes: 1fc12b05895e ("regulator: core: Avoid propagating to supplies when possible") Reported-by: Evan Green <evgreen@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13regulator: core: enable power when setting up constraintsOlliver Schinagl
[ Upstream commit 2bb1666369339f69f227ad060c250afde94d5c69 ] When a regulator is marked as always on, it is enabled early on, when checking and setting up constraints. It makes the assumption that the bootloader properly initialized the regulator, and just in case enables the regulator anyway. Some constraints however currently get missed, such as the soft-start and ramp-delay. This causes the regulator to be enabled, without the soft-start and ramp-delay being applied, which in turn can cause high-currents or other start-up problems. By moving the always-enabled constraints later in the constraints check, we can at least ensure all constraints for the regulator are followed. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13regulator: core: avoid regulator_resolve_supply() race conditionDavid Collins
[ Upstream commit eaa7995c529b54d68d97a30f6344cc6ca2f214a7 ] The final step in regulator_register() is to call regulator_resolve_supply() for each registered regulator (including the one in the process of being registered). The regulator_resolve_supply() function first checks if rdev->supply is NULL, then it performs various steps to try to find the supply. If successful, rdev->supply is set inside of set_supply(). This procedure can encounter a race condition if two concurrent tasks call regulator_register() near to each other on separate CPUs and one of the regulators has rdev->supply_name specified. There is currently nothing guaranteeing atomicity between the rdev->supply check and set steps. Thus, both tasks can observe rdev->supply==NULL in their regulator_resolve_supply() calls. This then results in both creating a struct regulator for the supply. One ends up actually stored in rdev->supply and the other is lost (though still present in the supply's consumer_list). Here is a kernel log snippet showing the issue: [ 12.421768] gpu_cc_gx_gdsc: supplied by pm8350_s5_level [ 12.425854] gpu_cc_gx_gdsc: supplied by pm8350_s5_level [ 12.429064] debugfs: Directory 'regulator.4-SUPPLY' with parent '17a00000.rsc:rpmh-regulator-gfxlvl-pm8350_s5_level' already present! Avoid this race condition by holding the rdev->mutex lock inside of regulator_resolve_supply() while checking and setting rdev->supply. Signed-off-by: David Collins <collinsd@codeaurora.org> Link: https://lore.kernel.org/r/1610068562-4410-1-git-send-email-collinsd@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-24regulator: workaround self-referent regulatorsMichał Mirosław
commit f5c042b23f7429e5c2ac987b01a31c69059a978b upstream. Workaround regulators whose supply name happens to be the same as its own name. This fixes boards that used to work before the early supply resolving was removed. The error message is left in place so that offending drivers can be detected. Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator") Cc: stable@vger.kernel.org Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # stpmic1 Link: https://lore.kernel.org/r/d703acde2a93100c3c7a81059d716c50ad1b1f52.1605226675.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24regulator: avoid resolve_supply() infinite recursionMichał Mirosław
commit 4b639e254d3d4f15ee4ff2b890a447204cfbeea9 upstream. When a regulator's name equals its supply's name the regulator_resolve_supply() recurses indefinitely. Add a check so that debugging the problem is easier. The "fixed" commit just exposed the problem. Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator") Cc: stable@vger.kernel.org Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # stpmic1 Link: https://lore.kernel.org/r/c6171057cfc0896f950c4d8cb82df0f9f1b89ad9.1605226675.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24regulator: fix memory leak with repeated set_machine_constraints()Michał Mirosław
commit 57a6ad482af256b2a13de14194fb8f67c1a65f10 upstream. Fixed commit introduced a possible second call to set_machine_constraints() and that allocates memory for rdev->constraints. Move the allocation to the caller so it's easier to manage and done once. Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator") Cc: stable@vger.kernel.org Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # stpmic1 Link: https://lore.kernel.org/r/78c3d4016cebc08d441aad18cb924b4e4d9cf9df.1605226675.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24regulator: pfuze100: limit pfuze-support-disable-sw to pfuze{100,200}Sean Nyekjaer
commit 365ec8b61689bd64d6a61e129e0319bf71336407 upstream. Limit the fsl,pfuze-support-disable-sw to the pfuze100 and pfuze200 variants. When enabling fsl,pfuze-support-disable-sw and using a pfuze3000 or pfuze3001, the driver would choose pfuze100_sw_disable_regulator_ops instead of the newly introduced and correct pfuze3000_sw_regulator_ops. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Fixes: 6f1cf5257acc ("regualtor: pfuze100: correct sw1a/sw2 on pfuze3000") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201110174113.2066534-1-sean@geanix.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24regulator: ti-abb: Fix array out of bound read access on the first transitionNishanth Menon
[ Upstream commit 2ba546ebe0ce2af47833d8912ced9b4a579f13cb ] At the start of driver initialization, we do not know what bias setting the bootloader has configured the system for and we only know for certain the very first time we do a transition. However, since the initial value of the comparison index is -EINVAL, this negative value results in an array out of bound access on the very first transition. Since we don't know what the setting is, we just set the bias configuration as there is nothing to compare against. This prevents the array out of bound access. NOTE: Even though we could use a more relaxed check of "< 0" the only valid values(ignoring cosmic ray induced bitflips) are -EINVAL, 0+. Fixes: 40b1936efebd ("regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver") Link: https://lore.kernel.org/linux-mm/CA+G9fYuk4imvhyCN7D7T6PMDH6oNp6HDCRiTUKMQ6QXXjBa4ag@mail.gmail.com/ Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20201118145009.10492-1-nm@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18regulator: defer probe when trying to get voltage from unresolved supplyMichał Mirosław
[ Upstream commit cf1ad559a20d1930aa7b47a52f54e1f8718de301 ] regulator_get_voltage_rdev() is called in regulator probe() when applying machine constraints. The "fixed" commit exposed the problem that non-bypassed regulators can forward the request to its parent (like bypassed ones) supply. Return -EPROBE_DEFER when the supply is expected but not resolved yet. Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator") Cc: stable@vger.kernel.org Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reported-by: Ondřej Jirman <megous@megous.com> Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Ondřej Jirman <megous@megous.com> Link: https://lore.kernel.org/r/a9041d68b4d35e4a2dd71629c8a6422662acb5ee.1604351936.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29regulator: resolve supply after creating regulatorMichał Mirosław
[ Upstream commit aea6cb99703e17019e025aa71643b4d3e0a24413 ] When creating a new regulator its supply cannot create the sysfs link because the device is not yet published. Remove early supply resolving since it will be done later anyway. This makes the following error disappear and the symlinks get created instead. DCDC_REG1: supplied by VSYS VSYS: could not add device link regulator.3 err -2 Note: It doesn't fix the problem for bypassed regulators, though. Fixes: 45389c47526d ("regulator: core: Add early supply resolution for regulators") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/ba09e0a8617ffeeb25cb4affffe6f3149319cef8.1601155770.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23regulator: pwm: Fix machine constraints applicationVincent Whitchurch
[ Upstream commit 59ae97a7a9e1499c2070e29841d1c4be4ae2994a ] If the zero duty cycle doesn't correspond to any voltage in the voltage table, the PWM regulator returns an -EINVAL from get_voltage_sel() which results in the core erroring out with a "failed to get the current voltage" and ending up not applying the machine constraints. Instead, return -ENOTRECOVERABLE which makes the core set the voltage since it's at an unknown value. For example, with this device tree: fooregulator { compatible = "pwm-regulator"; pwms = <&foopwm 0 100000>; regulator-min-microvolt = <2250000>; regulator-max-microvolt = <2250000>; regulator-name = "fooregulator"; regulator-always-on; regulator-boot-on; voltage-table = <2250000 30>; }; Before this patch: fooregulator: failed to get the current voltage(-22) After this patch: fooregulator: Setting 2250000-2250000uV fooregulator: 2250 mV Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20200902130952.24880-1-vincent.whitchurch@axis.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-17regulator: push allocation in set_consumer_device_supply() out of lockMichał Mirosław
commit 5c06540165d443c6455123eb48e7f1a9b618ab34 upstream. Pull regulator_list_mutex into set_consumer_device_supply() and keep allocations outside of it. Fourth of the fs_reclaim deadlock case. Fixes: 45389c47526d ("regulator: core: Add early supply resolution for regulators") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/f0380bdb3d60aeefa9693c4e234d2dcda7e56747.1597195321.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-30regualtor: pfuze100: correct sw1a/sw2 on pfuze3000Robin Gong
[ Upstream commit 6f1cf5257acc6e6242ddf2f52bc7912aed77b79f ] PFUZE100_SWB_REG is not proper for sw1a/sw2, because enable_mask/enable_reg is not correct. On PFUZE3000, sw1a/sw2 should be the same as sw1a/sw2 on pfuze100 except that voltages are not linear, so add new PFUZE3000_SW_REG and pfuze3000_sw_regulator_ops which like the non-linear PFUZE100_SW_REG and pfuze100_sw_regulator_ops. Fixes: 1dced996ee70 ("regulator: pfuze100: update voltage setting for pfuze3000 sw1a") Reported-by: Christophe Meynard <Christophe.Meynard@ign.fr> Signed-off-by: Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/1592171648-8752-1-git-send-email-yibin.gong@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24regulator: rk808: Lower log level on optional GPIOs being not availableMiquel Raynal
[ Upstream commit b8a039d37792067c1a380dc710361905724b9b2f ] RK808 can leverage a couple of GPIOs to tweak the ramp rate during DVS (Dynamic Voltage Scaling). These GPIOs are entirely optional but a dev_warn() appeared when cleaning this driver to use a more up-to-date gpiod API. At least reduce the log level to 'info' as it is totally fine to not populate these GPIO on a hardware design. This change is trivial but it is worth not polluting the logs during bringup phase by having real warnings and errors sorted out correctly. Fixes: a13eaf02e2d6 ("regulator: rk808: make better use of the gpiod API") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20191203164709.11127-1-miquel.raynal@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27regulator: tps65086: Fix tps65086_ldoa1_ranges for selector 0xBAxel Lin
[ Upstream commit e69b394703e032e56a140172440ec4f9890b536d ] selector 0xB (1011) should be 2.6V rather than 2.7V, fit ix. Table 5-4. LDOA1 Output Voltage Options VID Bits VOUT VID Bits VOUT VID Bits VOUT VID Bits VOUT 0000 1.35 0100 1.8 1000 2.3 1100 2.85 0001 1.5 0101 1.9 1001 2.4 1101 3.0 0010 1.6 0110 2.0 1010 2.5 1110 3.3 0011 1.7 0111 2.1 1011 2.6 1111 Not Used Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27regulator: lp87565: Fix missing register for LP87565_BUCK_0Axel Lin
[ Upstream commit d1a6cbdf1e597917cb642c655512d91b71a35d22 ] LP87565_BUCK_0 is missed, fix it. Fixes: f0168a9bf ("regulator: lp87565: Add support for lp87565 PMIC regulators") Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27regulator: wm831x-dcdc: Fix list of wm831x_dcdc_ilim from mA to uAAxel Lin
[ Upstream commit c25d47888f0fb3d836d68322d4aea2caf31a75a6 ] The wm831x_dcdc_ilim entries needs to be uA because it is used to compare with min_uA and max_uA. While at it also make the array const and change to use unsigned int. Fixes: e4ee831f949a ("regulator: Add WM831x DC-DC buck convertor support") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27regulator: pv88090: Fix array out-of-bounds accessAxel Lin
[ Upstream commit a5455c9159414748bed4678184bf69989a4f7ba3 ] Fix off-by-one while iterating current_limits array. The valid index should be 0 ~ n_current_limits -1. Fixes: c90456e36d9c ("regulator: pv88090: new regulator driver") Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27regulator: pv88080: Fix array out-of-bounds accessAxel Lin
[ Upstream commit 3c413f594c4f9df40061445667ca11a12bc8ee34 ] Fix off-by-one while iterating current_limits array. The valid index should be 0 ~ n_current_limits -1. Fixes: 99cf3af5e2d5 ("regulator: pv88080: new regulator driver") Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27regulator: pv88060: Fix array out-of-bounds accessAxel Lin
[ Upstream commit 7cd415f875591bc66c5ecb49bf84ef97e80d7b0e ] Fix off-by-one while iterating current_limits array. The valid index should be 0 ~ n_current_limits -1. Fixes: f307a7e9b7af ("regulator: pv88060: new regulator driver") Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12regulator: rn5t618: fix module aliasesAndreas Kemnade
[ Upstream commit 62a1923cc8fe095912e6213ed5de27abbf1de77e ] platform device aliases were missing, preventing autoloading of module. Fixes: 811b700630ff ("regulator: rn5t618: add driver for Ricoh RN5T618 regulators") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20191211221600.29438-1-andreas@kemnade.info Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12regulator: fix use after free issueWen Yang
[ Upstream commit 4affd79a125ac91e6a53be843ea3960a8fc00cbb ] This is caused by dereferencing 'rdev' after put_device() in the _regulator_get()/_regulator_put() functions. This patch just moves the put_device() down a bit to avoid the issue. Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20191124145835.25999-1-wenyang@linux.alibaba.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-09regulator: ab8500: Remove AB8505 USB regulatorStephan Gerhold
commit 99c4f70df3a6446c56ca817c2d0f9c12d85d4e7c upstream. The USB regulator was removed for AB8500 in commit 41a06aa738ad ("regulator: ab8500: Remove USB regulator"). It was then added for AB8505 in commit 547f384f33db ("regulator: ab8500: add support for ab8505"). However, there was never an entry added for it in ab8505_regulator_match. This causes all regulators after it to be initialized with the wrong device tree data, eventually leading to an out-of-bounds array read. Given that it is not used anywhere in the kernel, it seems likely that similar arguments against supporting it exist for AB8505 (it is controlled by hardware). Therefore, simply remove it like for AB8500 instead of adding an entry in ab8505_regulator_match. Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505") Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191106173125.14496-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31regulator: max8907: Fix the usage of uninitialized variable in ↵Yizhuo
max8907_regulator_probe() [ Upstream commit 472b39c3d1bba0616eb0e9a8fa3ad0f56927c7d7 ] Inside function max8907_regulator_probe(), variable val could be uninitialized if regmap_read() fails. However, val is used later in the if statement to decide the content written to "pmic", which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Link: https://lore.kernel.org/r/20191003175813.16415-1-yzhai003@ucr.edu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17regulator: 88pm800: fix warning same module namesAnders Roxell
[ Upstream commit 6f10419187d0d5fe395e2a2f2a64370961bf02a3 ] When building with CONFIG_MFD_88PM800 and CONFIG_REGULATOR_88PM800 enabled as loadable modules, we see the following warning: warning: same module names found: drivers/regulator/88pm800.ko drivers/mfd/88pm800.ko Rework so that the file is named 88pm800-regulator. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05regulator: tps65910: fix a missing check of return valueKangjie Lu
[ Upstream commit cd07e3701fa6a4c68f8493ee1d12caa18d46ec6a ] tps65910_reg_set_bits() may fail. The fix checks if it fails, and if so, returns with its error code. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05drivers/regulator: fix a missing check of return valueKangjie Lu
[ Upstream commit 966e927bf8cc6a44f8b72582a1d6d3ffc73b12ad ] If palmas_smps_read() fails, we should not use the read data in "reg" which may contain random value. The fix inserts a check for the return value of palmas_smps_read(): If it fails, we return the error code upstream and stop using "reg". Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-10regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() ↵Yizhuo
could be uninitialized [ Upstream commit 1252b283141f03c3dffd139292c862cae10e174d ] In function pfuze100_regulator_probe(), variable "val" could be initialized if regmap_read() fails. However, "val" is used to decide the control flow later in the if statement, which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Link: https://lore.kernel.org/r/20190929170957.14775-1-yzhai003@ucr.edu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-10regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdoneAxel Lin
[ Upstream commit f64db548799e0330897c3203680c2ee795ade518 ] ti_abb_wait_txdone() may return -ETIMEDOUT when ti_abb_check_txdone() returns true in the latest iteration of the while loop because the timeout value is abb->settling_time + 1. Similarly, ti_abb_clear_all_txdone() may return -ETIMEDOUT when ti_abb_check_txdone() returns false in the latest iteration of the while loop. Fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20190929095848.21960-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-10regulator: of: fix suspend-min/max-voltage parsingMarco Felsch
[ Upstream commit 131cb1210d4b58acb0695707dad2eb90dcb50a2a ] Currently the regulator-suspend-min/max-microvolt must be within the root regulator node but the dt-bindings specifies it as subnode properties for the regulator-state-[mem/disk/standby] node. The only DT using this bindings currently is the at91-sama5d2_xplained.dts and this DT uses it correctly. I don't know if it isn't tested but it can't work without this fix. Fixes: f7efad10b5c4 ("regulator: add PM suspend and resume hooks") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20190917154021.14693-3-m.felsch@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-05regulator: Defer init completion for a while after late_initcallMark Brown
commit 55576cf1853798e86f620766e23b604c9224c19c upstream. The kernel has no way of knowing when we have finished instantiating drivers, between deferred probe and systems that build key drivers as modules we might be doing this long after userspace has booted. This has always been a bit of an issue with regulator_init_complete since it can power off hardware that's not had it's driver loaded which can result in user visible effects, the main case is powering off displays. Practically speaking it's not been an issue in real systems since most systems that use the regulator API are embedded and build in key drivers anyway but with Arm laptops coming on the market it's becoming more of an issue so let's do something about it. In the absence of any better idea just defer the powering off for 30s after late_initcall(), this is obviously a hack but it should mask the issue for now and it's no more arbitrary than late_initcall() itself. Ideally we'd have some heuristics to detect if we're on an affected system and tune or skip the delay appropriately, and there may be some need for a command line option to be added. Link: https://lore.kernel.org/r/20190904124250.25844-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Tested-by: Lee Jones <lee.jones@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-05regulator: lm363x: Fix off-by-one n_voltages for lm3632 ldo_vpos/ldo_vnegAxel Lin
[ Upstream commit 1e2cc8c5e0745b545d4974788dc606d678b6e564 ] According to the datasheet https://www.ti.com/lit/ds/symlink/lm3632a.pdf Table 20. VPOS Bias Register Field Descriptions VPOS[5:0] Sets the Positive Display Bias (LDO) Voltage (50 mV per step) 000000: 4 V 000001: 4.05 V 000010: 4.1 V .................... 011101: 5.45 V 011110: 5.5 V (Default) 011111: 5.55 V .................... 100111: 5.95 V 101000: 6 V Note: Codes 101001 to 111111 map to 6 V The LM3632_LDO_VSEL_MAX should be 0b101000 (0x28), so the maximum voltage can match the datasheet. Fixes: 3a8d1a73a037 ("regulator: add LM363X driver") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20190626132632.32629-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26regulator: s2mps11: Fix buck7 and buck8 wrong voltagesKrzysztof Kozlowski
commit 16da0eb5ab6ef2dd1d33431199126e63db9997cc upstream. On S2MPS11 device, the buck7 and buck8 regulator voltages start at 750 mV, not 600 mV. Using wrong minimal value caused shifting of these regulator values by 150 mV (e.g. buck7 usually configured to v1.35 V was reported as 1.2 V). On most of the boards these regulators are left in default state so this was only affecting reported voltage. However if any driver wanted to change them, then effectively it would set voltage 150 mV higher than intended. Cc: <stable@vger.kernel.org> Fixes: cb74685ecb39 ("regulator: s2mps11: Add samsung s2mps11 regulator driver") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-05regulator: act8865: Fix act8600_sudcdc_voltage_ranges settingAxel Lin
[ Upstream commit f01a7beb6791f1c419424c1a6958b7d0a289c974 ] The act8600_sudcdc_voltage_ranges setting does not match the datasheet. The problems in below entry: REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000), 1. The off-by-one min_sel causes wrong volatage calculation. The min_sel should be 192. 2. According to the datasheet[1] Table 7. (on page 43): The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V. Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM. [1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf Fixes: df3a950e4e73 ("regulator: act8865: Add act8600 support") Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23regulator: s2mpa01: Fix step values for some LDOsStuart Menefy
commit 28c4f730d2a44f2591cb104091da29a38dac49fe upstream. The step values for some of the LDOs appears to be incorrect, resulting in incorrect voltages (or at least, ones which are different from the Samsung 3.4 vendor kernel). Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23regulator: max77620: Initialize values for DT propertiesMark Zhang
commit 0ab66b3c326ef8f77dae9f528118966365757c0c upstream. If regulator DT node doesn't exist, its of_parse_cb callback function isn't called. Then all values for DT properties are filled with zero. This leads to wrong register update for FPS and POK settings. Signed-off-by: Jinyoung Park <jinyoungp@nvidia.com> Signed-off-by: Mark Zhang <markz@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23regulator: s2mps11: Fix steps for buck7, buck8 and LDO35Krzysztof Kozlowski
commit 56b5d4ea778c1b0989c5cdb5406d4a488144c416 upstream. LDO35 uses 25 mV step, not 50 mV. Bucks 7 and 8 use 12.5 mV step instead of 6.25 mV. Wrong step caused over-voltage (LDO35) or under-voltage (buck7 and 8) if regulators were used (e.g. on Exynos5420 Arndale Octa board). Cc: <stable@vger.kernel.org> Fixes: cb74685ecb39 ("regulator: s2mps11: Add samsung s2mps11 regulator driver") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20regulator: fix crash caused by null driver dataYu Zhao
dev_set_drvdata() needs to be called before device_register() exposes device to userspace. Otherwise kernel crashes after it gets null pointer from dev_get_drvdata() when userspace tries to access sysfs entries. [Removed backtrace for length -- broonie] Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-09-03regulator: Fix 'do-nothing' value for regulators without suspend stateMarek Szyprowski
Some regulators don't have all states defined and in such cases regulator core should not assume anything. However in current implementation of of_get_regulation_constraints() DO_NOTHING_IN_SUSPEND enable value was set only for regulators which had suspend node defined, otherwise the default 0 value was used, what means DISABLE_IN_SUSPEND. This lead to broken system suspend/resume on boards, which had simple regulator constraints definition (without suspend state nodes). To avoid further mismatches between the default and uninitialized values of the suspend enabled/disabled states, change the values of the them, so default '0' means DO_NOTHING_IN_SUSPEND. Fixes: 72069f9957a1: regulator: leave one item to record whether regulator is enabled Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-08-29regulator: bd71837: Disable voltage monitoring for LDO3/4Matti Vaittinen
There is a HW quirk in BD71837. The shutdown sequence timings for bucks/LDOs which are enabled via register interface are changed. At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the beginning of shut-down sequence. This causes LDO5/6 voltage monitoring to detect under voltage and force PMIC to emergency state instead of poweroff. Disable voltage monitoring for LDO5 and LDO6 at probe to avoid this. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-08-20Merge tag 'mfd-next-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver - Add ChromeOS EC CEC driver - Add ROHM BD71837 PMIC driver New Device Support: - Add support for Dialog Semi DA9063L PMIC variant to DA9063 - Add support for Intel Ice Lake to Intel-PLSS-PCI - Add support for X-Powers AXP806 to AXP20x New Functionality: - Add support for USB Charging to the ChromeOS Embedded Controller - Add support for HDMI CEC to the ChromeOS Embedded Controller - Add support for HDMI CEC to Intel HDMI - Add support for accessory detection to Madera devices - Allow individual pins to be configured via DT' wlf,csnaddr-pd - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp Fix-upsL - Trivial renaming/spelling fixes; cros_ec, da9063-* - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc - Transition to helper macros/functions; da9063-* - Constify; kempld-core - Improve error path/messages; wm8994-core - Disable IRQs locally instead of relying on USB subsystem; dln2 - Remove unused code; rave-sp - New exports; sec-core Bug Fixes: - Fix possible false I2C transaction error; arizona-core - Fix declared memory area size; hi655x-pmic - Fix checksum type; rave-sp - Fix incorrect default serial port configuration: rave-sp - Fix incorrect coherent DMA mask for sub-devices; sm501" * tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: madera: Add register definitions for accessory detect mfd: sm501: Set coherent_dma_mask when creating subdevices mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC mfd: bd71837: Core driver for ROHM BD71837 PMIC media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC mfd: sec-core: Export OF module alias table mfd: as3722: Disable auto-power-on when AC OK mfd: axp20x: Support AXP806 in I2C mode mfd: axp20x: Add self-working mode support for AXP806 dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806 mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts mfd: wm8994: Allow to configure Speaker Mode Pullup from dts mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it mfd: rave-sp: Add legacy watchdog ping command translation mfd: rave-sp: Add legacy EEPROM access command translation mfd: rave-sp: Initialize flow control and parity of the port mfd: rave-sp: Fix incorrectly specified checksum type mfd: rave-sp: Remove unused defines mfd: hi655x: Fix regmap area declared size for hi655x mfd: ti_am335x_tscadc: Fix struct clk memory leak ...
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-08-10Merge branch 'regulator-4.19' into regulator-nextMark Brown
2018-08-10Merge branch 'regulator-4.18' into regulator-linusMark Brown
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-14 09:17:54 +0000