aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2021-11-26pinctrl: core: fix possible memory leak in pinctrl_enable()Yang Yingliang
commit c7892ae13e461ed20154321eb792e07ebe38f5b3 upstream. I got memory leak as follows when doing fault injection test: unreferenced object 0xffff888020a7a680 (size 64): comm "i2c-mcp23018-41", pid 23090, jiffies 4295160544 (age 8.680s) hex dump (first 32 bytes): 00 48 d3 1e 80 88 ff ff 00 1a 56 c1 ff ff ff ff .H........V..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000083c79b35>] kmem_cache_alloc_trace+0x16d/0x360 [<0000000051803c95>] pinctrl_init_controller+0x6ed/0xb70 [<0000000064346707>] pinctrl_register+0x27/0x80 [<0000000029b0e186>] devm_pinctrl_register+0x5b/0xe0 [<00000000391f5a3e>] mcp23s08_probe_one+0x968/0x118a [pinctrl_mcp23s08] [<000000006112c039>] mcp230xx_probe+0x266/0x560 [pinctrl_mcp23s08_i2c] If pinctrl_claim_hogs() fails, the 'pindesc' allocated in pinctrl_register_one_pin() need be freed. Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 950b0d91dc10 ("pinctrl: core: Fix regression caused by delayed work for hogs") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211022014323.1156924-1-yangyingliang@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry()Zhen Lei
[ Upstream commit d789a490d32fdf0465275e3607f8a3bc87d3f3ba ] Fix to return -ENOTSUPP instead of 0 when PCS_HAS_PINCONF is true, which is the same as that returned in pcs_parse_pinconf(). Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210722033930.4034-2-thunder.leizhen@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22pinctrl: samsung: Fix pinctrl bank pin countJaehyoung Choi
[ Upstream commit 70115558ab02fe8d28a6634350b3491a542aaa02 ] Commit 1abd18d1a51a ("pinctrl: samsung: Register pinctrl before GPIO") changes the order of GPIO and pinctrl registration: now pinctrl is registered before GPIO. That means gpio_chip->ngpio is not set when samsung_pinctrl_register() called, and one cannot rely on that value anymore. Use `pin_bank->nr_pins' instead of `pin_bank->gpio_chip.ngpio' to fix mentioned inconsistency. Fixes: 1abd18d1a51a ("pinctrl: samsung: Register pinctrl before GPIO") Signed-off-by: Jaehyoung Choi <jkkkkk.choi@samsung.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20210730192905.7173-1-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20pinctrl/amd: Add device HID for new AMD GPIO controllerMaximilian Luz
commit 1ca46d3e43569186bd1decfb02a6b4c4ddb4304b upstream. Add device HID AMDI0031 to the AMD GPIO controller driver match table. This controller can be found on Microsoft Surface Laptop 4 devices and seems similar enough that we can just copy the existing AMDI0030 entry. Cc: <stable@vger.kernel.org> # 5.10+ Tested-by: Sachi King <nakato@nakato.io> Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20210512210316.1982416-1-luzmaximilian@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-30pinctrl: stm32: fix the reported number of GPIO lines per bankFabien Dessenne
[ Upstream commit 67e2996f72c71ebe4ac2fcbcf77e54479bb7aa11 ] Each GPIO bank supports a variable number of lines which is usually 16, but is less in some cases : this is specified by the last argument of the "gpio-ranges" bank node property. Report to the framework, the actual number of lines, so the libgpiod gpioinfo command lists the actually existing GPIO lines. Fixes: 1dc9d289154b ("pinctrl: stm32: add possibility to use gpio-ranges to declare bank range") Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com> Link: https://lore.kernel.org/r/20210617144629.2557693-1-fabien.dessenne@foss.st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22pinctrl: samsung: use 'int' for register masks in ExynosKrzysztof Kozlowski
[ Upstream commit fa0c10a5f3a49130dd11281aa27e7e1c8654abc7 ] The Special Function Registers on all Exynos SoC, including ARM64, are 32-bit wide, so entire driver uses matching functions like readl() or writel(). On 64-bit ARM using unsigned long for register masks: 1. makes little sense as immediately after bitwise operation it will be cast to 32-bit value when calling writel(), 2. is actually error-prone because it might promote other operands to 64-bit. Addresses-Coverity: Unintentional integer overflow Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20210408195029.69974-1-krzysztof.kozlowski@canonical.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-28pinctrl: lewisburg: Update number of pins in communityYuanyuan Zhong
[ Upstream commit 196d941753297d0ca73c563ccd7d00be049ec226 ] When updating pin names for Intel Lewisburg, the numbers of pins were left behind. Update them accordingly. Fixes: e66ff71fd0db ("pinctrl: lewisburg: Update pin list according to v1.1v6") Signed-off-by: Yuanyuan Zhong <yzhong@purestorage.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-07pinctrl: rockchip: fix restore error in resumeWang Panzhenzhuan
commit c971af25cda94afe71617790826a86253e88eab0 upstream. The restore in resume should match to suspend which only set for RK3288 SoCs pinctrl. Fixes: 8dca933127024 ("pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume") Reviewed-by: Jianqun Xu <jay.xu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Wang Panzhenzhuan <randy.wang@rock-chips.com> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20210223100725.269240-1-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-29pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe()Yu Kuai
[ Upstream commit 89cce2b3f247a434ee174ab6803698041df98014 ] if of_find_device_by_node() succeed, pinctrl_falcon_probe() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation. Fixes: e316cb2b16bb ("OF: pinctrl: MIPS: lantiq: adds support for FALCON SoC") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20201119011219.2248232-1-yukuai3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29pinctrl: baytrail: Avoid clearing debounce value when turning it offAndy Shevchenko
[ Upstream commit 0b74e40a4e41f3cbad76dff4c50850d47b525b26 ] Baytrail pin control has a common register to set up debounce timeout. When a pin configuration requested debounce to be disabled, the rest of the pins may still want to have debounce enabled and thus rely on the common timeout value. Avoid clearing debounce value when turning it off for one pin while others may still use it. Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration") Depends-on: 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") Depends-on: 827e1579e1d5 ("pinctrl: baytrail: Rectify debounce support (part 2)") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29pinctrl: merrifield: Set default bias in case no particular value givenAndy Shevchenko
[ Upstream commit 0fa86fc2e28227f1e64f13867e73cf864c6d25ad ] When GPIO library asks pin control to set the bias, it doesn't pass any value of it and argument is considered boolean (and this is true for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual drivers must behave well, when they got the resistance value of 1 Ohm, i.e. transforming it to sane default. In case of Intel Merrifield pin control hardware the 20 kOhm sounds plausible because it gives a good trade off between weakness and minimization of leakage current (will be only 50 uA with the above choice). Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Depends-on: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29pinctrl: amd: remove debounce filter setting in IRQ type settingCoiby Xu
commit 47a0001436352c9853d72bf2071e85b316d688a2 upstream. Debounce filter setting should be independent from IRQ type setting because according to the ACPI specs, there are separate arguments for specifying debounce timeout and IRQ type in GpioIo() and GpioInt(). Together with commit 06abe8291bc31839950f7d0362d9979edc88a666 ("pinctrl: amd: fix incorrect way to disable debounce filter") and Andy's patch "gpiolib: acpi: Take into account debounce settings" [1], this will fix broken touchpads for laptops whose BIOS set the debounce timeout to a relatively large value. For example, the BIOS of Lenovo AMD gaming laptops including Legion-5 15ARH05 (R7000), Legion-5P (R7000P) and IdeaPad Gaming 3 15ARH05, set the debounce timeout to 124.8ms. This led to the kernel receiving only ~7 HID reports per second from the Synaptics touchpad (MSFT0001:00 06CB:7F28). Existing touchpads like [2][3] are not troubled by this bug because the debounce timeout has been set to 0 by the BIOS before enabling the debounce filter in setting IRQ type. [1] https://lore.kernel.org/linux-gpio/20201111222008.39993-11-andriy.shevchenko@linux.intel.com/ 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings") [2] https://github.com/Syniurge/i2c-amd-mp2/issues/11#issuecomment-721331582 [3] https://forum.manjaro.org/t/random-short-touchpad-freezes/30832/28 Signed-off-by: Coiby Xu <coiby.xu@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-gpio/CAHp75VcwiGREBUJ0A06EEw-SyabqYsp%2Bdqs2DpSrhaY-2GVdAA%40mail.gmail.com/ BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1887190 Link: https://lore.kernel.org/r/20201125130320.311059-1-coiby.xu@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., ↵Hans de Goede
GPIOD_OUT_HIGH) commit 156abe2961601d60a8c2a60c6dc8dd6ce7adcdaf upstream The pins on the Bay Trail SoC have separate input-buffer and output-buffer enable bits and a read of the level bit of the value register will always return the value from the input-buffer. The BIOS of a device may configure a pin in output-only mode, only enabling the output buffer, and write 1 to the level bit to drive the pin high. This 1 written to the level bit will be stored inside the data-latch of the output buffer. But a subsequent read of the value register will return 0 for the level bit because the input-buffer is disabled. This causes a read-modify-write as done by byt_gpio_set_direction() to write 0 to the level bit, driving the pin low! Before this commit byt_gpio_direction_output() relied on pinctrl_gpio_direction_output() to set the direction, followed by a call to byt_gpio_set() to apply the selected value. This causes the pin to go low between the pinctrl_gpio_direction_output() and byt_gpio_set() calls. Change byt_gpio_direction_output() to directly make the register modifications itself instead. Replacing the 2 subsequent writes to the value register with a single write. Note that the pinctrl code does not keep track internally of the direction, so not going through pinctrl_gpio_direction_output() is not an issue. This issue was noticed on a Trekstor SurfTab Twin 10.1. When the panel is already on at boot (no external monitor connected), then the i915 driver does a gpiod_get(..., GPIOD_OUT_HIGH) for the panel-enable GPIO. The temporarily going low of that GPIO was causing the panel to reset itself after which it would not show an image until it was turned off and back on again (until a full modeset was done on it). This commit fixes this. This commit also updates the byt_gpio_direction_input() to use direct register accesses instead of going through pinctrl_gpio_direction_input(), to keep it consistent with byt_gpio_direction_output(). Note for backporting, this commit depends on: commit e2b74419e5cc ("pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output") Cc: stable@vger.kernel.org Fixes: 86e3ef812fe3 ("pinctrl: baytrail: Update gpio chip operations") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [sudip: use byt_gpio and vg->pdev->dev for dev_info()] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-11pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq ↵Hans de Goede
pin to output commit e2b74419e5cc7cfc58f3e785849f73f8fa0af5b3 upstream Suspending Goodix touchscreens requires changing the interrupt pin to output before sending them a power-down command. Followed by wiggling the interrupt pin to wake the device up, after which it is put back in input mode. On Cherry Trail device the interrupt pin is listed as a GpioInt ACPI resource so we can do this without problems as long as we release the IRQ before changing the pin to output mode. On Bay Trail devices with a Goodix touchscreen direct-irq mode is used in combination with listing the pin as a normal GpioIo resource. This works fine, but this triggers the WARN in byt_gpio_set_direction-s output path because direct-irq support is enabled on the pin. This commit replaces the WARN call with a dev_info_once call, fixing a bunch of WARN splats in dmesg on each suspend/resume cycle. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-24pinctrl: rockchip: enable gpio pclk for rockchip_gpio_to_irqJianqun Xu
[ Upstream commit 63fbf8013b2f6430754526ef9594f229c7219b1f ] There need to enable pclk_gpio when do irq_create_mapping, since it will do access to gpio controller. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang<kever.yang@rock-chips.com> Link: https://lore.kernel.org/r/20201013063731.3618-3-jay.xu@rock-chips.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18pinctrl: amd: fix incorrect way to disable debounce filterCoiby Xu
commit 06abe8291bc31839950f7d0362d9979edc88a666 upstream. The correct way to disable debounce filter is to clear bit 5 and 6 of the register. Cc: stable@vger.kerne.org Signed-off-by: Coiby Xu <coiby.xu@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/linux-gpio/df2c008b-e7b5-4fdd-42ea-4d1c62b52139@redhat.com/ Link: https://lore.kernel.org/r/20201105231912.69527-2-coiby.xu@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18pinctrl: amd: use higher precision for 512 RtcClkCoiby Xu
commit c64a6a0d4a928c63e5bc3b485552a8903a506c36 upstream. RTC is 32.768kHz thus 512 RtcClk equals 15625 usec. The documentation likely has dropped precision and that's why the driver mistakenly took the slightly deviated value. Cc: stable@vger.kernel.org Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Coiby Xu <coiby.xu@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/linux-gpio/2f4706a1-502f-75f0-9596-cc25b4933b6c@redhat.com/ Link: https://lore.kernel.org/r/20201105231912.69527-3-coiby.xu@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18pinctrl: aspeed: Fix GPI only function problem.Billy Tsai
[ Upstream commit 9b92f5c51e9a41352d665f6f956bd95085a56a83 ] Some gpio pin at aspeed soc is input only and the prefix name of these pin is "GPI" only. This patch fine-tune the condition of GPIO check from "GPIO" to "GPI" and it will fix the usage error of banks D and E in the AST2400/AST2500 and banks T and U in the AST2600. Fixes: 4d3d0e4272d8 ("pinctrl: Add core support for Aspeed SoCs") Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20201030055450.29613-1-billy_tsai@aspeedtech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18pinctrl: intel: Set default bias in case no particular value givenAndy Shevchenko
[ Upstream commit f3c75e7a9349d1d33eb53ddc1b31640994969f73 ] When GPIO library asks pin control to set the bias, it doesn't pass any value of it and argument is considered boolean (and this is true for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual drivers must behave well, when they got the resistance value of 1 Ohm, i.e. transforming it to sane default. In case of Intel pin control hardware the 5 kOhm sounds plausible because on one hand it's a minimum of resistors present in all hardware generations and at the same time it's high enough to minimize leakage current (will be only 200 uA with the above choice). Fixes: e57725eabf87 ("pinctrl: intel: Add support for hardware debouncer") Reported-by: Jamie McClymont <jamie@kwiius.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29pinctrl: mcp23s08: Fix mcp23x17 precious rangeThomas Preston
[ Upstream commit b9b7fb29433b906635231d0a111224efa009198c ] On page 23 of the datasheet [0] it says "The register remains unchanged until the interrupt is cleared via a read of INTCAP or GPIO." Include INTCAPA and INTCAPB registers in precious range, so that they aren't accidentally cleared when we read via debugfs. [0] https://ww1.microchip.com/downloads/en/DeviceDoc/20001952C.pdf Fixes: 8f38910ba4f6 ("pinctrl: mcp23s08: switch to regmap caching") Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200828213226.1734264-3-thomas.preston@codethink.co.uk Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29pinctrl: mcp23s08: Fix mcp23x17_regmap initialiserThomas Preston
[ Upstream commit b445f6237744df5e8d4f56f8733b2108c611220a ] The mcp23x17_regmap is initialised with structs named "mcp23x16". However, the mcp23s08 driver doesn't support the MCP23016 device yet, so this appears to be a typo. Fixes: 8f38910ba4f6 ("pinctrl: mcp23s08: switch to regmap caching") Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200828213226.1734264-2-thomas.preston@codethink.co.uk Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14pinctrl: mvebu: Fix i2c sda definition for 98DX3236Chris Packham
[ Upstream commit 63c3212e7a37d68c89a13bdaebce869f4e064e67 ] Per the datasheet the i2c functions use MPP_Sel=0x1. They are documented as using MPP_Sel=0x4 as well but mixing 0x1 and 0x4 is clearly wrong. On the board tested 0x4 resulted in a non-functioning i2c bus so stick with 0x1 which works. Fixes: d7ae8f8dee7f ("pinctrl: mvebu: pinctrl driver for 98DX3236 SoC") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20200907211712.9697-2-chris.packham@alliedtelesis.co.nz Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21pinctrl-single: fix pcs_parse_pinconf() return valueDrew Fustini
[ Upstream commit f46fe79ff1b65692a65266a5bec6dbe2bf7fc70f ] This patch causes pcs_parse_pinconf() to return -ENOTSUPP when no pinctrl_map is added. The current behavior is to return 0 when !PCS_HAS_PINCONF or !nconfs. Thus pcs_parse_one_pinctrl_entry() incorrectly assumes that a map was added and sets num_maps = 2. Analysis: ========= The function pcs_parse_one_pinctrl_entry() calls pcs_parse_pinconf() if PCS_HAS_PINCONF is enabled. The function pcs_parse_pinconf() returns 0 to indicate there was no error and num_maps is then set to 2: 980 static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs, 981 struct device_node *np, 982 struct pinctrl_map **map, 983 unsigned *num_maps, 984 const char **pgnames) 985 { <snip> 1053 (*map)->type = PIN_MAP_TYPE_MUX_GROUP; 1054 (*map)->data.mux.group = np->name; 1055 (*map)->data.mux.function = np->name; 1056 1057 if (PCS_HAS_PINCONF && function) { 1058 res = pcs_parse_pinconf(pcs, np, function, map); 1059 if (res) 1060 goto free_pingroups; 1061 *num_maps = 2; 1062 } else { 1063 *num_maps = 1; 1064 } However, pcs_parse_pinconf() will also return 0 if !PCS_HAS_PINCONF or !nconfs. I believe these conditions should indicate that no map was added by returning -ENOTSUPP. Otherwise pcs_parse_one_pinctrl_entry() will set num_maps = 2 even though no maps were successfully added, as it does not reach "m++" on line 940: 895 static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np, 896 struct pcs_function *func, 897 struct pinctrl_map **map) 898 899 { 900 struct pinctrl_map *m = *map; <snip> 917 /* If pinconf isn't supported, don't parse properties in below. */ 918 if (!PCS_HAS_PINCONF) 919 return 0; 920 921 /* cacluate how much properties are supported in current node */ 922 for (i = 0; i < ARRAY_SIZE(prop2); i++) { 923 if (of_find_property(np, prop2[i].name, NULL)) 924 nconfs++; 925 } 926 for (i = 0; i < ARRAY_SIZE(prop4); i++) { 927 if (of_find_property(np, prop4[i].name, NULL)) 928 nconfs++; 929 } 930 if (!nconfs) 919 return 0; 932 933 func->conf = devm_kcalloc(pcs->dev, 934 nconfs, sizeof(struct pcs_conf_vals), 935 GFP_KERNEL); 936 if (!func->conf) 937 return -ENOMEM; 938 func->nconfs = nconfs; 939 conf = &(func->conf[0]); 940 m++; This situtation will cause a boot failure [0] on the BeagleBone Black (AM3358) when am33xx_pinmux node in arch/arm/boot/dts/am33xx-l4.dtsi has compatible = "pinconf-single" instead of "pinctrl-single". The patch fixes this issue by returning -ENOSUPP when !PCS_HAS_PINCONF or !nconfs, so that pcs_parse_one_pinctrl_entry() will know that no map was added. Logic is also added to pcs_parse_one_pinctrl_entry() to distinguish between -ENOSUPP and other errors. In the case of -ENOSUPP, num_maps is set to 1 as it is valid for pinconf to be enabled and a given pin group to not any pinconf properties. [0] https://lore.kernel.org/linux-omap/20200529175544.GA3766151@x1/ Fixes: 9dddb4df90d1 ("pinctrl: single: support generic pinconf") Signed-off-by: Drew Fustini <drew@beagleboard.org> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200608125143.GA2789203@x1 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-29pinctrl: amd: fix npins for uart0 in kerncz_groupsJacky Hu
[ Upstream commit 69339d083dfb7786b0e0b3fc19eaddcf11fabdfb ] uart0_pins is defined as: static const unsigned uart0_pins[] = {135, 136, 137, 138, 139}; which npins is wronly specified as 9 later { .name = "uart0", .pins = uart0_pins, .npins = 9, }, npins should be 5 instead of 9 according to the definition. Signed-off-by: Jacky Hu <hengqing.hu@gmail.com> Link: https://lore.kernel.org/r/20200616015024.287683-1-hengqing.hu@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-25pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()'Christophe JAILLET
[ Upstream commit 11d8da5cabf7c6c3263ba2cd9c00260395867048 ] 'pinctrl_unregister()' should not be called to undo 'devm_pinctrl_register_and_init()', it is already handled by the framework. This simplifies the error handling paths of the probe function. The 'imx_free_resources()' can be removed as well. Fixes: a51c158bf0f7 ("pinctrl: imx: use radix trees for groups and functions") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/20200530204955.588962-1-christophe.jaillet@wanadoo.fr Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-25pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()'Christophe JAILLET
[ Upstream commit 9eb728321286c4b31e964d2377fca2368526d408 ] When 'pinctrl_register()' has been turned into 'devm_pinctrl_register()', an error handling path has not been updated. Axe a now unneeded 'pinctrl_unregister()'. Fixes: e55e025d1687 ("pinctrl: imxl: Use devm_pinctrl_register() for pinctrl registration") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200530201952.585798-1-christophe.jaillet@wanadoo.fr Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-20pinctrl: samsung: Save/restore eint_mask over suspend for EINT_TYPE GPIOsJonathan Bakker
commit f354157a7d184db430c1a564c506434e33b1bec5 upstream. Currently, for EINT_TYPE GPIOs, the CON and FLTCON registers are saved and restored over a suspend/resume cycle. However, the EINT_MASK registers are not. On S5PV210 at the very least, these registers are not retained over suspend, leading to the interrupts remaining masked upon resume and therefore no interrupts being triggered for the device. There should be no effect on any SoCs that do retain these registers as theoretically we would just be re-writing what was already there. Fixes: 7ccbc60cd9c2 ("pinctrl: exynos: Handle suspend/resume of GPIO EINT registers") Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20pinctrl: cherryview: Add missing spinlock usage in chv_gpio_irq_handlerGrace Kao
[ Upstream commit 69388e15f5078c961b9e5319e22baea4c57deff1 ] According to Braswell NDA Specification Update (#557593), concurrent read accesses may result in returning 0xffffffff and write instructions may be dropped. We have an established format for the commit references, i.e. cdca06e4e859 ("pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handler") Fixes: 0bd50d719b00 ("pinctrl: cherryview: prevent concurrent access to GPIO controllers") Signed-off-by: Grace Kao <grace.kao@intel.com> Reported-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20pinctrl: baytrail: Enable pin configuration setting for GPIO chipAndy Shevchenko
[ Upstream commit ccd025eaddaeb99e982029446197c544252108e2 ] It appears that pin configuration for GPIO chip hasn't been enabled yet due to absence of ->set_config() callback. Enable it here for Intel Baytrail. Fixes: c501d0b149de ("pinctrl: baytrail: Add pin control operations") Depends-on: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-20pinctrl: core: Remove extra kref_get which blocks hogs being freedCharles Keepax
commit aafd56fc79041bf36f97712d4b35208cbe07db90 upstream. kref_init starts with the reference count at 1, which will be balanced by the pinctrl_put in pinctrl_unregister. The additional kref_get in pinctrl_claim_hogs will increase this count to 2 and cause the hogs to not get freed when pinctrl_unregister is called. Fixes: 6118714275f0 ("pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200228154142.13860-1-ckeepax@opensource.cirrus.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-20pinctrl: meson-gxl: fix GPIOX sdio pinsNicolas Belin
commit dc7a06b0dbbafac8623c2b7657e61362f2f479a7 upstream. In the gxl driver, the sdio cmd and clk pins are inverted. It has not caused any issue so far because devices using these pins always take both pins so the resulting configuration is OK. Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions") Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Nicolas Belin <nbelin@baylibre.com> Link: https://lore.kernel.org/r/1582204512-7582-1-git-send-email-nbelin@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28pinctrl: sh-pfc: sh7269: Fix CAN function GPIOsGeert Uytterhoeven
[ Upstream commit 02aeb2f21530c98fc3ca51028eda742a3fafbd9f ] pinmux_func_gpios[] contains a hole due to the missing function GPIO definition for the "CTX0&CTX1" signal, which is the logical "AND" of the first two CAN outputs. A closer look reveals other issues: - Some functionality is available on alternative pins, but the PINMUX_DATA() entries is using the wrong marks, - Several configurations are missing. Fix this by: - Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK, resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the corresponding enum IDs, - Adding all missing enum IDs and marks, - Use the right (*_PJ2x) variants for alternative pins, - Adding all missing configurations to pinmux_data[], - Adding all missing function GPIO definitions to pinmux_func_gpios[]. See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00: [1] Table 1.4 List of Pins [2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel (32 Mailboxes × 1 Channel), [3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as One Channel (96 Mailboxes × 1 Channel), [4] Table 48.3 Multiplexed Pins (Port B), [5] Table 48.4 Multiplexed Pins (Port C), [6] Table 48.10 Multiplexed Pins (Port J), [7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-5-geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pinsHans de Goede
[ Upstream commit a23680594da7a9e2696dbcf4f023e9273e2fa40b ] Suspending Goodix touchscreens requires changing the interrupt pin to output before sending them a power-down command. Followed by wiggling the interrupt pin to wake the device up, after which it is put back in input mode. On Bay Trail devices with a Goodix touchscreen direct-irq mode is used in combination with listing the pin as a normal GpioIo resource. This works fine, until the goodix driver gets rmmod-ed and then insmod-ed again. In this case byt_gpio_disable_free() calls byt_gpio_clear_triggering() which clears the IRQ flags and after that the (direct) IRQ no longer triggers. This commit fixes this by adding a check for the BYT_DIRECT_IRQ_EN flag to byt_gpio_clear_triggering(). Note that byt_gpio_clear_triggering() only gets called from byt_gpio_disable_free() for direct-irq enabled pins, as these are excluded from the irq_valid mask by byt_init_irq_valid_mask(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28pinctrl: sh-pfc: sh7264: Fix CAN function GPIOsGeert Uytterhoeven
[ Upstream commit 55b1cb1f03ad5eea39897d0c74035e02deddcff2 ] pinmux_func_gpios[] contains a hole due to the missing function GPIO definition for the "CTX0&CTX1" signal, which is the logical "AND" of the two CAN outputs. Fix this by: - Renaming CRX0_CRX1_MARK to CTX0_CTX1_MARK, as PJ2MD[2:0]=010 configures the combined "CTX0&CTX1" output signal, - Renaming CRX0X1_MARK to CRX0_CRX1_MARK, as PJ3MD[1:0]=10 configures the shared "CRX0/CRX1" input signal, which is fed to both CAN inputs, - Adding the missing function GPIO definition for "CTX0&CTX1" to pinmux_func_gpios[], - Moving all CAN enums next to each other. See SH7262 Group, SH7264 Group User's Manual: Hardware, Rev. 4.00: [1] Figure 1.2 (3) (Pin Assignment for the SH7264 Group (1-Mbyte Version), [2] Figure 1.2 (4) Pin Assignment for the SH7264 Group (640-Kbyte Version, [3] Table 1.4 List of Pins, [4] Figure 20.29 Connection Example when Using This Module as 1-Channel Module (64 Mailboxes x 1 Channel), [5] Table 32.10 Multiplexed Pins (Port J), [6] Section 32.2.30 (3) Port J Control Register 0 (PJCR0). Note that the last 2 disagree about PJ2MD[2:0], which is probably the root cause of this bug. But considering [4], "CTx0&CTx1" in [5] must be correct, and "CRx0&CRx1" in [6] must be wrong. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-4-geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-14pinctrl: sh-pfc: r8a7778: Fix duplicate SDSELF_B and SD1_CLK_BGeert Uytterhoeven
commit 805f635703b2562b5ddd822c62fc9124087e5dd5 upstream. The FN_SDSELF_B and FN_SD1_CLK_B enum IDs are used twice, which means one set of users must be wrong. Replace them by the correct enum IDs. Fixes: 87f8c988636db0d4 ("sh-pfc: Add r8a7778 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-2-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-27pinctrl: iproc-gpio: Fix incorrect pinconf configurationsLi Jin
[ Upstream commit 398a1f50e3c731586182fd52b834103b0aa2f826 ] Fix drive strength for AON/CRMU controller; fix pull-up/down setting for CCM/CDRU controller. Fixes: 616043d58a89 ("pinctrl: Rename gpio driver from cygnus to iproc") Signed-off-by: Li Jin <li.jin@broadcom.com> Link: https://lore.kernel.org/r/1567054348-19685-2-git-send-email-srinath.mannam@broadcom.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groupsGeert Uytterhoeven
[ Upstream commit 0e6e448bdcf896d001a289a6112a704542d51516 ] There are two pin groups for the FSIC SPDIF signal, but the FSIC pin group array lists only one, and it refers to a nonexistent group. Fixes: 2ecd4154c906b7d6 ("sh-pfc: sh73a0: Add FSI pin groups and functions") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin groupGeert Uytterhoeven
[ Upstream commit b9fd50488b4939ce5b3a026d29e752e17c2d1800 ] The vin1_data18_b pin group itself is present, but it is not listed in the VIN1 pin group array, and thus cannot be selected. Fixes: 7dd74bb1f058786e ("pinctrl: sh-pfc: r8a7792: Add VIN pin groups") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin groupGeert Uytterhoeven
[ Upstream commit a4b0350047f1b10207e25e72d7cd3f7826e93769 ] The entry for "scifb2_data_c" in the SCIFB2 pin group array contains a typo, thus the group cannot be selected. Fixes: 5088451962389924 ("pinctrl: sh-pfc: r8a7791 PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27pinctrl: sh-pfc: emev2: Add missing pinmux functionsGeert Uytterhoeven
[ Upstream commit 1ecd8c9cb899ae277e6986ae134635cb1a50f5de ] The err_rst_reqb, ext_clki, lowpwr, and ref_clko pin groups are present, but no pinmux functions refer to them, hence they can not be selected. Fixes: 1e7d5d849cf4f0c5 ("sh-pfc: Add emev2 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27pinctrl: sh-pfc: sh7734: Remove bogus IPSR10 valueGeert Uytterhoeven
[ Upstream commit 4d374bacd7c9665179f9752a52d5d602c45d8190 ] The IP10[5:3] field in Peripheral Function Select Register 10 has a width of 3 bits, i.e. it allows programming one out of 8 different configurations. However, 9 values are provided instead of 8, overflowing into the subsequent field in the register, and thus breaking the configuration of the latter. Fix this by dropping a bogus zero value. Fixes: ac1ebc2190f575fc ("sh-pfc: Add sh7734 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27pinctrl: sh-pfc: sh7269: Add missing PCIOR0 fieldGeert Uytterhoeven
[ Upstream commit 9540cbdfcd861caf67a6f0e4bb7f46d41c4aad86 ] The Port C I/O Register 0 contains 7 reserved bits, but the descriptor contains only dummy configuration values for 6 reserved bits, thus breaking the configuration of all subsequent fields in the register. Fix this by adding the two missing configuration values. Fixes: f5e811f2a43117b2 ("sh-pfc: Add sh7269 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27pinctrl: sh-pfc: r8a77995: Remove bogus SEL_PWM[0-3]_3 configurationsGeert Uytterhoeven
[ Upstream commit e28dc3f09c9d2555a9bd982f0847988591052226 ] While the SEL_PWM[0-3] fields in the Module Select Register 0 support 4 possible configurations per PWM pin, only the first 3 are valid. Replace the invalid and unused configurations for SEL_PWM[0-3]_3 by dummies. Fixes: 794a6711764658a1 ("pinctrl: sh-pfc: Initial R8A77995 PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27pinctrl: sh-pfc: sh7734: Add missing IPSR11 fieldGeert Uytterhoeven
[ Upstream commit 94482af7055e1ffa211c1135256b85590ebcac99 ] The Peripheral Function Select Register 11 contains 3 reserved bits and 15 variable-width fields, but the variable field descriptor does not contain the 3-bit field IP11[25:23]. Fixes: 856cb4bb337ee504 ("sh: Add support pinmux for SH7734") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27pinctrl: sh-pfc: r8a7794: Remove bogus IPSR9 fieldGeert Uytterhoeven
[ Upstream commit 6a6c195d98a1a5e70faa87f594d7564af1dd1bed ] The Peripheral Function Select Register 9 contains 12 fields, but the variable field descriptor contains a 13th bogus field of 3 bits. Fixes: 43c4436e2f1890a7 ("pinctrl: sh-pfc: add R8A7794 PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27pinctrl: sh-pfc: sh73a0: Add missing TO pin to tpu4_to3 groupGeert Uytterhoeven
[ Upstream commit 124cde98f856b6206b804acbdec3b7c80f8c3427 ] The tpu4_to3_mux[] array contains the TPU4TO3 pin mark, but the tpu4_to3_pins[] array lacks the corresponding pin number. Add the missing pin number, for non-GPIO pin F26. Fixes: 5da4eb049de803c7 ("sh-pfc: sh73a0: Add TPU pin groups and functions") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27pinctrl: sh-pfc: r8a7791: Remove bogus marks from vin1_b_data18 groupGeert Uytterhoeven
[ Upstream commit 0d6256cb880166a4111bebce35790019e56b6e1b ] The vin1_b_data18_mux[] arrays contains pin marks for the 2 LSB bits of the color components. The vin1_b_data18_pins[] array rightfully does not include the corresponding pin numbers, as RGB18 is subset of RGB24, containing only the 6 MSB bits of each component. Fixes: 8e32c9671f84acd8 ("pinctrl: sh-pfc: r8a7791: Add VIN pins") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27pinctrl: sh-pfc: r8a7791: Remove bogus ctrl marks from qspi_data4_b groupGeert Uytterhoeven
[ Upstream commit 884fa25fb6e5e63ab970d612a628313bb68f37cc ] The qspi_data4_b_mux[] array contains pin marks for the clock and chip select pins. The qspi_data4_b_pins[] array rightfully does not contain the corresponding pin numbers, as the control pins are provided by a separate group (qspi_ctrl_b). Fixes: 2d0c386f135e4186 ("pinctrl: sh-pfc: r8a7791: Add QSPI pin groups") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27pinctrl: sh-pfc: r8a7740: Add missing LCD0 marks to lcd0_data24_1 groupGeert Uytterhoeven
[ Upstream commit 96bb2a6ab4eca10e5b6490b3f0738e9f7ec22c2b ] The lcd0_data24_1_pins[] array contains the LCD0 D1[2-5] pin numbers, but the lcd0_data24_1_mux[] array lacks the corresponding pin marks. Fixes: 06c7dd866da70f6c ("sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27pinctrl: sh-pfc: r8a7740: Add missing REF125CK pin to gether_gmii groupGeert Uytterhoeven
[ Upstream commit 1ebc589a7786f17f97b9e87b44e0fb4d0290d8f8 ] The gether_gmii_mux[] array contains the REF125CK pin mark, but the gether_gmii_pins[] array lacks the corresponding pin number. Fixes: bae11d30d0cafdc5 ("sh-pfc: r8a7740: Add GETHER pin groups and functions") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-20 10:51:24 +0000