summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/pinctrl-single.c
AgeCommit message (Collapse)Author
2021-09-18pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry()Zhen Lei
[ Upstream commit d789a490d32fdf0465275e3607f8a3bc87d3f3ba ] Fix to return -ENOTSUPP instead of 0 when PCS_HAS_PINCONF is true, which is the same as that returned in pcs_parse_pinconf(). Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210722033930.4034-2-thunder.leizhen@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-07pinctrl: single: config: enable the pin's inputDario Binacchi
It enables / disables the input buffer. As explained in the description of 'enum pin_config_param' this does not affect the pin's ability to drive output. Signed-off-by: Dario Binacchi <dariobin@libero.it> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210602150420.18202-1-dariobin@libero.it Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-28pinctrl: Fix kernel-docYang Li
Fix function name in pinctrl-single.c kernel-doc comment to remove a warning found by clang_w1. drivers/pinctrl/pinctrl-single.c:1523: warning: expecting prototype for pcs_irq_handle(). Prototype was for pcs_irq_chain_handler() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1621998464-10918-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-22pinctrl: Introduce MODE group in enum pin_config_paramAndy Shevchenko
Better to have a MODE group of settings to keep them together when ordered alphabetically. Hence, rename PIN_CONFIG_LOW_POWER_MODE to PIN_CONFIG_MODE_LOW_POWER. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210412140741.39946-2-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-25pinctrl: pinctrl-single: fix pcs_pin_dbg_show() when bits_per_mux is not zeroHanna Hawa
A System Error (SError, followed by kernel panic) was detected when trying to print the supported pins in a pinctrl device which supports multiple pins per register. This change fixes the pcs_pin_dbg_show() in pinctrl-single driver when bits_per_mux is not zero. In addition move offset calculation and pin offset in register to common function. Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules") Signed-off-by: Hanna Hawa <hhhawa@amazon.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Drew Fustini <drew@beagleboard.org> Link: https://lore.kernel.org/r/20210319152133.28705-4-hhhawa@amazon.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-25pinctrl: pinctrl-single: remove unused parameterHanna Hawa
Remove unused parameter 'pin_pos' from pcs_add_pin(). Signed-off-by: Hanna Hawa <hhhawa@amazon.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Drew Fustini <drew@beagleboard.org> Link: https://lore.kernel.org/r/20210319152133.28705-3-hhhawa@amazon.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-25pinctrl: pinctrl-single: remove unused variableHanna Hawa
Remove unused parameter 'num_pins_in_register' from pcs_allocate_pin_table(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Hanna Hawa <hhhawa@amazon.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Drew Fustini <drew@beagleboard.org> Link: https://lore.kernel.org/r/20210319152133.28705-2-hhhawa@amazon.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-12pinctrl: single: set function name when adding functionDrew Fustini
pcs_add_function() fails to set the function name in struct pcs_function when adding a new function. As a result this line in pcs_set_mux(): dev_dbg(pcs->dev, "enabling %s function%i\n", func->name, fselector); prints "(null)" for the function: pinctrl-single 44e10800.pinmux: enabling (null) function0 pinctrl-single 44e10800.pinmux: enabling (null) function1 pinctrl-single 44e10800.pinmux: enabling (null) function2 pinctrl-single 44e10800.pinmux: enabling (null) function3 With this fix, the output is now: pinctrl-single 44e10800.pinmux: enabling pinmux-uart0-pins function0 pinctrl-single 44e10800.pinmux: enabling pinmux-mmc0-pins function1 pinctrl-single 44e10800.pinmux: enabling pinmux-i2c0-pins function2 pinctrl-single 44e10800.pinmux: enabling pinmux-mmc0-pins function3 Cc: Jason Kridner <jkridner@beagleboard.org> Cc: Robert Nelson <robertcnelson@beagleboard.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Drew Fustini <drew@beagleboard.org> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210125203542.51513-1-drew@beagleboard.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-01pinctrl: single: fix debug output when #pinctrl-cells = 2Drew Fustini
The debug output in pcs_parse_one_pinctrl_entry() needs to be updated to print the correct pinctrl register value when #pinctrl-cells is 2. Fixes: a13395418888 ("pinctrl: single: parse #pinctrl-cells = 2") Reported-by: Trent Piepho <tpiepho@gmail.com> Signed-off-by: Drew Fustini <drew@beagleboard.org> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/linux-omap/3139716.CMS8C0sQ7x@zen.local/ Link: https://lore.kernel.org/r/20200913230306.2061645-1-drew@beagleboard.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-01pinctrl: single: fix pinctrl_spec.args_count bounds checkDrew Fustini
The property #pinctrl-cells can either be 1 or 2: - if #pinctrl-cells = <1>, then pinctrl_spec.args_count = 2 - if #pinctrl-cells = <2>, then pinctrl_spec.args_count = 3 All other values of pinctrl_spec.args_count are incorrect. This fix checks the upper bound instead of just the lower bound. Fixes: a13395418888 ("pinctrl: single: parse #pinctrl-cells = 2") Reported-by: Trent Piepho <tpiepho@gmail.com> Signed-off-by: Drew Fustini <drew@beagleboard.org> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/linux-omap/3139716.CMS8C0sQ7x@zen.local/ Link: https://lore.kernel.org/r/20200930174839.1308344-1-drew@beagleboard.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-20pinctrl: single: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200716212317.GA17754@embeddedor Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: pinctrl-single: Fix struct/function documentation blocksLee Jones
Add some missing attributes/parameter descriptions, remove other superfluous ones, add struct header titles and fix misspellings. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-single.c:50: warning: Function parameter or member 'mask' not described in 'pcs_func_vals' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'conf' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'nconfs' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:659: warning: Function parameter or member 'pin_pos' not described in 'pcs_add_pin' drivers/pinctrl/pinctrl-single.c:985: warning: Excess function parameter 'pctldev' description in 'pcs_parse_one_pinctrl_entry' drivers/pinctrl/pinctrl-single.c:1357: warning: Cannot understand * @reg: virtual address of interrupt register drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'irq' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'enable' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1458: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1458: warning: Excess function parameter 'pcs_irq' description in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1506: warning: Excess function parameter 'irq' description in 'pcs_irq_chain_handler' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: linux-omap@vger.kernel.org Link: https://lore.kernel.org/r/20200713144930.1034632-22-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-07pinctrl: single: fix function name in documentationDrew Fustini
Use the correct the function name in the documentation for "pcs_parse_one_pinctrl_entry()". "smux_parse_one_pinctrl_entry()" appears to be an artifact from the development of a prior patch series ("simple pinmux driver") which transformed into pinctrl-single. Fixes: 8b8b091bf07f ("pinctrl: Add one-register-per-pin type device tree based pinctrl driver") Signed-off-by: Drew Fustini <drew@beagleboard.org> Link: https://lore.kernel.org/r/20200617180543.GA4186054@x1 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-07pinctrl: single: parse #pinctrl-cells = 2Drew Fustini
If "pinctrl-single,pins" has 3 arguments (offset, conf, mux), then pcs_parse_one_pinctrl_entry() does an OR operation on conf and mux to get the value to store in the register. Signed-off-by: Drew Fustini <drew@beagleboard.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org> Link: https://lore.kernel.org/r/20200701013320.130441-2-drew@beagleboard.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-16pinctrl-single: fix pcs_parse_pinconf() return valueDrew Fustini
This patch causes pcs_parse_pinconf() to return -ENOTSUPP when no pinctrl_map is added. The current behavior is to return 0 when !PCS_HAS_PINCONF or !nconfs. Thus pcs_parse_one_pinctrl_entry() incorrectly assumes that a map was added and sets num_maps = 2. Analysis: ========= The function pcs_parse_one_pinctrl_entry() calls pcs_parse_pinconf() if PCS_HAS_PINCONF is enabled. The function pcs_parse_pinconf() returns 0 to indicate there was no error and num_maps is then set to 2: 980 static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs, 981 struct device_node *np, 982 struct pinctrl_map **map, 983 unsigned *num_maps, 984 const char **pgnames) 985 { <snip> 1053 (*map)->type = PIN_MAP_TYPE_MUX_GROUP; 1054 (*map)->data.mux.group = np->name; 1055 (*map)->data.mux.function = np->name; 1056 1057 if (PCS_HAS_PINCONF && function) { 1058 res = pcs_parse_pinconf(pcs, np, function, map); 1059 if (res) 1060 goto free_pingroups; 1061 *num_maps = 2; 1062 } else { 1063 *num_maps = 1; 1064 } However, pcs_parse_pinconf() will also return 0 if !PCS_HAS_PINCONF or !nconfs. I believe these conditions should indicate that no map was added by returning -ENOTSUPP. Otherwise pcs_parse_one_pinctrl_entry() will set num_maps = 2 even though no maps were successfully added, as it does not reach "m++" on line 940: 895 static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np, 896 struct pcs_function *func, 897 struct pinctrl_map **map) 898 899 { 900 struct pinctrl_map *m = *map; <snip> 917 /* If pinconf isn't supported, don't parse properties in below. */ 918 if (!PCS_HAS_PINCONF) 919 return 0; 920 921 /* cacluate how much properties are supported in current node */ 922 for (i = 0; i < ARRAY_SIZE(prop2); i++) { 923 if (of_find_property(np, prop2[i].name, NULL)) 924 nconfs++; 925 } 926 for (i = 0; i < ARRAY_SIZE(prop4); i++) { 927 if (of_find_property(np, prop4[i].name, NULL)) 928 nconfs++; 929 } 930 if (!nconfs) 919 return 0; 932 933 func->conf = devm_kcalloc(pcs->dev, 934 nconfs, sizeof(struct pcs_conf_vals), 935 GFP_KERNEL); 936 if (!func->conf) 937 return -ENOMEM; 938 func->nconfs = nconfs; 939 conf = &(func->conf[0]); 940 m++; This situtation will cause a boot failure [0] on the BeagleBone Black (AM3358) when am33xx_pinmux node in arch/arm/boot/dts/am33xx-l4.dtsi has compatible = "pinconf-single" instead of "pinctrl-single". The patch fixes this issue by returning -ENOSUPP when !PCS_HAS_PINCONF or !nconfs, so that pcs_parse_one_pinctrl_entry() will know that no map was added. Logic is also added to pcs_parse_one_pinctrl_entry() to distinguish between -ENOSUPP and other errors. In the case of -ENOSUPP, num_maps is set to 1 as it is valid for pinconf to be enabled and a given pin group to not any pinconf properties. [0] https://lore.kernel.org/linux-omap/20200529175544.GA3766151@x1/ Fixes: 9dddb4df90d1 ("pinctrl: single: support generic pinconf") Signed-off-by: Drew Fustini <drew@beagleboard.org> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200608125143.GA2789203@x1 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-29pinctrl: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Barry Song <baohua@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-omap@vger.kernel.org Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-14Merge tag 'pinctrl-v4.19-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for v4.19: Core changes: - Augment pinctrl_generic_add_group() and pinmux_generic_add_function() to return the selector for the added group/function to the caller and augment (hopefully) all drivers to handle this New subdrivers: - Qualcomm PM8998 and PM8005 are supported in the SPMI pin control and GPIO driver - Intel Ice Lake PCH (platform controller hub) support - NXP (ex Freescale) i.MX8MQ support - Berlin AS370 support Improvements to drivers: - Support interrupts on the Ocelot pin controller - Add SPI pins to the Uniphier driver - Define a GPIO compatible per SoC in the Tegra driver - Push Tegra initialization down in the initlevels - Support external wakeup interrupts on the Exynos - Add generic clocks pins to the meson driver - Add USB and HSCIF pins for some Renesas PFC chips - Suspend/resume support in the armada-37xx - Interrupt support for the Actions Semiconductor S900 also known as "owl" - Correct the pin ordering in Cedarfork - Debugfs output for INTF in the mcp23s08 driver - Avoid divisions in context save/restore in pinctrl-single The rest is minor bug fixes or cleanups" * tag 'pinctrl-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (69 commits) pinctrl: nomadik: silence uninitialized variable warning pinctrl: axp209: Fix NULL pointer dereference after allocation pinctrl: samsung: Remove duplicated "wakeup" in printk pinctrl: ocelot: add support for interrupt controller pinctrl: intel: Don't shadow error code of gpiochip_lock_as_irq() pinctrl: berlin: fix 'pctrl->functions' allocation in berlin_pinctrl_build_state gpio: tegra: Move driver registration to subsys_init level pinctrl: tegra: Move drivers registration to arch_init level pinctrl: baytrail: actually print the apparently misconfigured pin MAINTAINERS: Replace Heikki as maintainer of Intel pinctrl pinctrl: freescale: off by one in imx1_pinconf_group_dbg_show() pinctrl: uniphier: add spi pin-mux settings pinctrl: cannonlake: Fix community ordering for H variant pinctrl: tegra: define GPIO compatible node per SoC pinctrl: intel: Do pin translation when lock IRQ pinctrl: imx: off by one in imx_pinconf_group_dbg_show() pinctrl: mediatek: include chained_irq.h header pinctrl/amd: only handle irq if it is pending and unmasked pinctrl/amd: fix gpio irq level in debugfs pinctrl: stm32: add syscfg mask parameter ...
2018-07-17pinctrl: single: Fix missing unlock on error pathWei Yongjun
Add the missing unlock before return from function in the error handling case. Fixes: 0f5972033509 ("pinctrl: single: Fix group and function selector use") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-17pinctrl: single: Fix group and function selector useTony Lindgren
We must use a mutex around the generic_add functions and save the function and group selector in case we need to remove them. Otherwise the selector use will be racy for deferred probe at least. Note that struct device_node *np is unused in pcs_add_function() we remove that too and fix a checkpatch warning for bare unsigned while at it. Fixes: 571aec4df5b7 ("pinctrl: single: Use generic pinmux helpers for managing functions") Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: Christ van Willegen <cvwillegen@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Jacopo Mondi <jacopo+renesas@jmondi.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-By: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-18pinctrl: pinctrl-single: Avoid divisions in context save/restoreGeert Uytterhoeven
The divisions (and multiplications) can be avoided by changing the loops to use increments of mux_bytes instead of 1. While at it, remove the unneeded casts when assigning void pointers. This saves +100 bytes of kernel size on arm32/arm64. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-18pinctrl: single: Add allocation failure checking of saved_valsColin Ian King
Currently saved_vals is being allocated and there is no check for failed allocation (which is more likely than normal when using GFP_ATOMIC). Fix this by checking for a failed allocation and propagating this error return down the the caller chain. Detected by CoverityScan, CID#1469841 ("Dereference null return value") Fixes: 88a1dbdec682 ("pinctrl: pinctrl-single: Add functions to save and restore pinctrl context") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Johan Hovold <johan@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-23pinctrl: pinctrl-single: Add functions to save and restore pinctrl contextKeerthy
This adds a pair of context save/restore functions to save/restore the state of a set of pinctrl registers. The context is lost during rtc only suspend with ddr in self-refresh on am43xx. Currently the save/restore is being done unconditionally. This will be optimized later with a pdata-quirk function which will allow is to save/restore only when doing the rtc only mode with ddr in self refresh. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-26pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0David Lechner
This fixes pcs_request_gpio() in the pinctrl-single driver when bits_per_mux != 0. It appears this was overlooked when the multiple pins per register feature was added. Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules") Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-02Merge tag 'pinctrl-v4.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.16 kernel cycle. Like with GPIO it is actually a bit calm this time. Core changes: - After lengthy discussions and partly due to my ignorance, we have merged a patch making pinctrl_force_default() and pinctrl_force_sleep() reprogram the states into the hardware of any hogged pins, even if they are already in the desired state. This only apply to hogged pins since groups of pins owned by drivers need to be managed by each driver, lest they could not do things like runtime PM and put pins to sleeping state even if the system as a whole is not in sleep. New drivers: - New driver for the Microsemi Ocelot SoC. This is used in ethernet switches. - The X-Powers AXP209 GPIO driver was extended to also deal with pin control and moved over from the GPIO subsystem. This circuit is a mixed-mode integrated circuit which is part of AllWinner designs. - New subdriver for the Qualcomm MSM8998 SoC, core of a high end mobile devices (phones) chipset. - New subdriver for the ST Microelectronics STM32MP157 MPU and STM32F769 MCU from the STM32 family. - New subdriver for the MediaTek MT7622 SoC. This is used for routers, repeater, gateways and such network infrastructure. - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has multimedia features and target "smart devices", I guess in-car entertainment, in-flight entertainment, industrial control panels etc. General improvements: - Incremental improvements on the SH-PFC subdrivers for things like the CAN bus. - Enable the glitch filter on Baytrail GPIOs used for interrupts. - Proper handling of pins to GPIO ranges on the Semtec SX150X - An IRQ setup ordering fix on MCP23S08. - A good set of janitorial coding style fixes" * tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits) pinctrl: mcp23s08: fix irq setup order pinctrl: Forward declare struct device pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding pinctrl: stm32: add STM32F769 MCU support pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping pinctrl: sx150x: Register pinctrl before adding the gpiochip pinctrl: sx150x: Unregister the pinctrl on release pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe() pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show() pinctrl: pinmux: Use seq_putc() in pinmux_pins_show() pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show() pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call pinctrl: mediatek: mt7622: fix potential uninitialized value being returned pinctrl: uniphier: refactor drive strength get/set functions pinctrl: imx7ulp: constify struct imx_cfg_params_decode pinctrl: imx: constify struct imx_pinctrl_soc_info pinctrl: imx7d: simplify imx7d_pinctrl_probe pinctrl: imx: use struct imx_pinctrl_soc_info as a const pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly. pinctrl: qcom: Add msm8998 pinctrl driver ...
2018-01-03pinctrl: single: Delete an unnecessary return statement in ↵Markus Elfring
pcs_irq_chain_handler() The script "checkpatch.pl" pointed information out like the following. WARNING: void function return statements are not generally useful Thus remove such a statement in the affected function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-03pinctrl: single: Delete an error message for a failed memory allocation in ↵Markus Elfring
pcs_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-28kernel/irq: Extend lockdep class for request mutexAndrew Lunn
The IRQ code already has support for lockdep class for the lock mutex in an interrupt descriptor. Extend this to add a second class for the request mutex in the descriptor. Not having a class is resulting in false positive splats in some code paths. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: linus.walleij@linaro.org Cc: grygorii.strashko@ti.com Cc: f.fainelli@gmail.com Link: https://lkml.kernel.org/r/1512234664-21555-1-git-send-email-andrew@lunn.ch
2017-12-20pinctrl: single: Remove invalid messageTony Lindgren
Pinctrl single should just show how many pins were found, the physical address is already in the dev information. So let's remove the wrong information that claims to show the physical address but really prints a virtual address that is now hashed. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-21pinctrl: single: make two arrays static const, reduces object code sizeColin Ian King
Don't populate the read-only arrays prop2 and prop4 on the stack, instead make them static const. Makes the object code smaller by over 230 bytes: Before: text data bss dec hex filename 28235 5820 192 34247 85c7 drivers/pinctrl/pinctrl-single.o After: text data bss dec hex filename 27839 5980 192 34011 84db drivers/pinctrl/pinctrl-single.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: single: use of_device_get_match_data() to get soc dataMasahiro Yamada
Use of_device_get_match_data() instead of of_match_device(). It allows us to remove the forward declaration of pcs_of_match. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-07pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()Tony Lindgren
Recent pinctrl changes to allow dynamic allocation of pins exposed one more issue with the pinctrl pins claimed early by the controller itself. This caused a regression for IMX6 pinctrl hogs. Before enabling the pin controller driver we need to wait until it has been properly initialized, then claim the hogs, and only then enable it. To fix the regression, split the code into pinctrl_claim_hogs() and pinctrl_enable(). And then let's require that pinctrl_enable() is always called by the pin controller driver when ready after calling pinctrl_register_and_init(). Depends-on: 950b0d91dc10 ("pinctrl: core: Fix regression caused by delayed work for hogs") Fixes: df61b366af26 ("pinctrl: core: Use delayed work for hogs") Fixes: e566fc11ea76 ("pinctrl: imx: use generic pinctrl helpers for managing groups") Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Nishanth Menon <nm@ti.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Gary Bisson <gary.bisson@boundarydevices.com> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26Merge branch 'ib-pinctrl-genprops' into develLinus Walleij
2017-01-26pinctrl: Widen the generic pinconf argument from 16 to 24 bitsMika Westerberg
The current pinconf packed format allows only 16-bit argument limiting the maximum value 65535. For most types this is enough. However, debounce time can be in range of hundreths of milliseconds in case of mechanical switches so we cannot represent the worst case using the current format. In order to support larger values change the packed format so that the lower 8 bits are used as type which leaves 24 bits for the argument. This allows representing values up to 16777215 and debounce times up to 16 seconds. We also convert the existing users to use 32-bit integer when extracting argument from the packed configuration value. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-13pinctrl: core: Fix regression caused by delayed work for hogsTony Lindgren
Commit df61b366af26 ("pinctrl: core: Use delayed work for hogs") caused a regression at least with sh-pfc that is also a GPIO controller as noted by Geert Uytterhoeven <geert@linux-m68k.org>. As the original pinctrl_register() has issues calling pin controller driver functions early before the controller has finished registering, we can't just revert commit df61b366af26. That would break the drivers using GENERIC_PINCTRL_GROUPS or GENERIC_PINMUX_FUNCTIONS. So let's fix the issue with the following steps as a single patch: 1. Revert the late_init parts of commit df61b366af26. The late_init clearly won't work and we have to just give up on fixing pinctrl_register() for GENERIC_PINCTRL_GROUPS and GENERIC_PINMUX_FUNCTIONS. 2. Split pinctrl_register() into two parts By splitting pinctrl_register() into pinctrl_init_controller() and pinctrl_create_and_start() we have better control over when it's safe to call pinctrl_create(). 3. Introduce a new pinctrl_register_and_init() function As suggested by Linus Walleij <linus.walleij@linaro.org>, we can just introduce a new function for the controllers that need pinctrl_create() called later. 4. Convert the four known problem cases to use new function Let's convert pinctrl-imx, pinctrl-single, sh-pfc and ti-iodelay to use the new function to fix the issues. The rest of the drivers can be converted later. Let's also update Documentation/pinctrl.txt accordingly because of the known issues with pinctrl_register(). Fixes: df61b366af26 ("pinctrl: core: Use delayed work for hogs") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-03pinctrl: single: Use generic pinmux helpers for managing functionsTony Lindgren
We can now drop the driver specific code for managing functions. Signed-off-by: Tony Lindgren <tony@atomide.com> [Replaces GENERIC_PINMUX with GENERIC_PINMUX_FUNCTIONS] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-03pinctrl: single: Use generic pinctrl helpers for managing groupsTony Lindgren
We can now drop the driver specific code for managing groups. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-30pinctrl: single: fix spelling mistakes on "Ivalid"Colin Ian King
Trivial fixe to spelling mistake "Ivalid" to "Invalid" in dev_err error message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-16pinctrl: single: Fix a couple error codesDan Carpenter
We should return -ENOMEM instead of success if pcs_add_function() fails. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-11pinctrl: single: search for the bits property when parsing bitsAxel Haslam
The pcs_parse_bits_in_pinctrl_entry function should search for the "pinctrl-single,bits" and not "pinctrl-single,pins" Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-11pinctrl: single: check for any error when getting rowsAxel Haslam
pinctrl_count_index_with_args returns -ENOENT not -EINVAL. The return check would pass, and we would try to kzalloc with a negative error size throwing a warning. Instead of checking for -EINVAL specifically, lets check for any error and avoid negative size allocations. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-04pinctrl: single: Use generic parser and #pinctrl-cells for pinctrl-single,bitsTony Lindgren
We can now use generic parser and keep things compatible with the old binding. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-04pinctrl: single: Use generic parser and #pinctrl-cells for pinctrl-single,pinsTony Lindgren
We can now use generic parser. To support the legacy binding without #pinctrl-cells, add pcs_quirk_missing_pinctrl_cells() and warn about missing #pinctrl-cells. Let's also update the documentation for struct pcs_soc_data while at it as that seems to be out of date. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-28pinctrl: single: Drop pointless macroTony Lindgren
This is left over from initial experiments with more properties. It's only used in one place, so let's just get rid of it to make the code more readable. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-28pinctrl: single: Drop custom namesTony Lindgren
>From tony Mon Sep 17 00:00:00 2001 From: Tony Lindgren <tony@atomide.com> Date: Tue, 25 Oct 2016 08:33:34 -0700 Subject: [PATCHv2] pinctrl: single: Drop custom names We no longer need to allocate custom names as those are dynamically generated in pinctrl_register_one_pin() if no name is passed to pinctrl_register_pins(). Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-22pinctrl: single: Fix missing flush of posted write for a wakeirqTony Lindgren
With many repeated suspend resume cycles, the pin specific wakeirq may not always work on omaps. This is because the write to enable the pin interrupt may not have reached the device over the interconnect before suspend happens. Let's fix the issue with a flush of posted write with a readback. Cc: stable@vger.kernel.org Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-15pinctrl: single: Fix pcs_parse_bits_in_pinctrl_entry to use __ffs than ffsKeerthy
pcs_parse_bits_in_pinctrl_entry uses ffs which gives bit indices ranging from 1 to MAX. This leads to a corner case where we try to request the pin number = MAX and fails. bit_pos value is being calculted using ffs. pin_num_from_lsb uses bit_pos value. pins array is populated with: pin + pin_num_from_lsb. The above is 1 more than usual bit indices as bit_pos uses ffs to compute first set bit. Hence the last of the pins array is populated with the MAX value and not MAX - 1 which causes error when we call pin_request. mask_pos is rightly calculated as ((pcs->fmask) << (bit_pos - 1)) Consequently val_pos and submask are correct. Hence use __ffs which gives (ffs(x) - 1) as the first bit set. fixes: 4e7e8017a8 ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules") Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-11pinctrl: single: Use a separate lockdep classSudeep Holla
The single pinmux controller can be cascaded to the other interrupt controllers. Hence when propagating wake-up settings to its parent interrupt controller, there's possiblity of detecting possible recursive locking and getting lockdep warning. This patch avoids this false positive by using a separate lockdep class for this single pinctrl interrupts. Cc: linux-gpio@vger.kernel.org Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-17pinctrl: Delete unnecessary checksMarkus Elfring
The pinctrl_unregister() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-02 07:47:11 +0000