summaryrefslogtreecommitdiffstats
path: root/drivers/phy/cadence
AgeCommit message (Collapse)Author
2020-06-24phy: cadence: sierra: Fix for USB3 U1/U2 stateSanket Parmar
[ Upstream commit 2bcf14ca1a2f3202954f812f380c7fa8127fbd7f ] Updated values of USB3 related Sierra PHY registers. This change fixes USB3 device disconnect issue observed while enternig U1/U2 state. Signed-off-by: Sanket Parmar <sparmar@cadence.com> Link: https://lore.kernel.org/r/1589804053-14302-1-git-send-email-sparmar@cadence.com Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-20phy: cadence-torrent: Add support for subnode bindingsSwapnil Jakhade
Implement single link subnode support to the phy driver. Add reset support including PHY reset and individual lane reset. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Add platform dependent initialization structureSwapnil Jakhade
Add platform dependent initialization data for Torrent PHY used in TI's J721E SoC. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Use regmap to read and write DPTX PHY registersSwapnil Jakhade
Use regmap to read and write DPTX specific PHY registers. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Use regmap to read and write Torrent PHY registersSwapnil Jakhade
Use regmap for accessing Torrent PHY registers. Modify register offsets as defined in Torrent PHY user guide. Abstract address calculation using regmap APIs. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Implement PHY configure APIsSwapnil Jakhade
Add support for PHY configuration APIs. These will mainly reconfigure link rate, number of lanes, voltage swing and pre-emphasis values. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Add 19.2 MHz reference clock supportSwapnil Jakhade
Add configuration functions for 19.2 MHz refclock support. Add register configurations for SSC support. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Refactor code for reusabilitySwapnil Jakhade
Add a separate function to set different power state values. Use uniform polling timeout value. Also check return values of functions for proper error handling. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Add wrapper for DPTX register accessSwapnil Jakhade
Add wrapper functions to read, write DisplayPort specific PHY registers to improve code readability. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Add wrapper for PHY register accessSwapnil Jakhade
Add a wrapper function to write Torrent PHY registers to improve code readability. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Adopt Torrent nomenclatureSwapnil Jakhade
- Change private data struct cdns_dp_phy to cdns_torrent_phy - Change module description and registration accordingly - Generic torrent functions have prefix cdns_torrent_phy_* - Functions specific to Torrent phy for DisplayPort are prefixed as cdns_torrent_dp_* Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-dp: Rename to phy-cadence-torrentYuti Amonkar
Rename Cadence DP PHY driver from phy-cadence-dp to phy-cadence-torrent to make it more generic for future use. Modifiy Makefile and Kconfig accordingly. Also, change driver compatible from "cdns,dp-phy" to "cdns,torrent-phy".This will not affect ABI as the driver has never been functional, and therefore do not exist in any active use case. Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-14phy: cadence: Sierra: add phy_reset hookRoger Quadros
Some platforms e.g. J721e need lane swap register to be programmed before reset is deasserted. This patch ensures that we propagate the phy_reset back to the reset controller driver. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-14phy: cadence: Sierra: remove redundant initialization of pointer regmapColin Ian King
The pointer regmap is being initialized with a value that is never read and it is being updated later with a new value from phy->regmap_common_cdb. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: cadence: Sierra: Use correct dev pointer in cdns_sierra_phy_remove()Kishon Vijay Abraham I
commit 44d30d622821d3b ("phy: cadence: Add driver for Sierra PHY"), incorrectly used parent device pointer to get driver data. Fix it here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: cadence: Sierra: Set cmn_refclk_dig_div/cmn_refclk1_dig_div frequency ↵Kishon Vijay Abraham I
to 25MHz Set cmn_refclk_dig_div/cmn_refclk1_dig_div frequency to 25MHz as specified in "Common Module Clock Configurations" of the Cadence Sierra 16FFC Multi-Protocol PHY PMA Specification. It is set to 25MHz since the only user of Cadence Sierra SERDES, TI J721E SoC provides input clock frequency of 100MHz. For other frequencies, cmn_refclk_dig_div/cmn_refclk1_dig_div should be configured based on the "Common Module Clock Configurations". Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: cadence: Sierra: Change MAX_LANES of Sierra to 16Kishon Vijay Abraham I
Sierra SERDES IP supports upto 16 lanes (though not all of it will be enabled in a platform). Allow Sierra driver to support a maximum of upto 16 lanes. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: cadence: Sierra: Check for PLL lock during PHY power onKishon Vijay Abraham I
Check for PLL lock during PHY power on. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: cadence: Sierra: Get reset control "array" for each linkKishon Vijay Abraham I
A link may have multiple lanes each with a separate reset. Get reset control "array" in order to reset all the lanes associated with the link. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: cadence: Sierra: Configure both lane cdb and common cdb registers for ↵Anil Varughese
external SSC The existing configuration done in Cadence Sierra driver is only for reference and is not used in any platforms. Remove them and configure both lane cdb and common cdb registers to be used with external SSC configuration. This is validated in TI J721E platform. Signed-off-by: Anil Varughese <aniljoy@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: cadence: Sierra: Modify register macro names to be in sync with Sierra ↵Kishon Vijay Abraham I
user guide No functional change. Modify register offset macro names to be in sync with Sierra user guide. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: cadence: Sierra: Make cdns_sierra_phy_init() as phy_opsKishon Vijay Abraham I
Instead of invoking cdns_sierra_phy_init() from probe, add it in phy_ops so that it's initialized when the PHY consumer invokes phy_init() Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: cadence: Sierra: Add support for SERDES_16G used in J721E SoCKishon Vijay Abraham I
SERDES_16G in TI's J721E SoC uses Cadence Sierra PHY. Add support to use Cadence Sierra driver in J721E SoC. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: cadence: Sierra: Use "regmap" for read and write to Sierra registersKishon Vijay Abraham I
Use "regmap" for read and write to Sierra registers. This is in perparation for adding SERDES_16G support present in TI's J721E SoC. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: cadence: Sierra: Make "phy_clk" and "sierra_apb" optional resourcesKishon Vijay Abraham I
Certain platforms like TI J721E using Cadence Sierra Serdes doesn't provide explicit phy_clk and reset (APB reset) control. Make them optional here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07phy: Add Cadence D-PHY supportMaxime Ripard
Cadence has designed a D-PHY that can be used by the, currently in tree, DSI bridge (DRM), CSI Transceiver and CSI Receiver (v4l2) drivers. Only the DSI driver has an ad-hoc driver for that phy at the moment, while the v4l2 drivers are completely missing any phy support. In order to make that phy support available to all these drivers, without having to duplicate that code three times, let's create a generic phy framework driver. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: cadence: Add driver for Sierra PHYAlan Douglas
Add a Sierra PHY driver with PCIe and USB support. The PHY has multiple lanes, which can be configured into groups, and a generic PHY device is created for each group. There are two resets controlling the overall PHY block, one to enable the APB interface for programming registers, and another to enable the PHY itself. Additionally there are resets for each PHY lane. The PHY can be configured in hardware to read register settings from ROM, or they can be written by the driver. The sequence of operation on startup is to enable the APB bus, write the PHY registers (if required) for each lane group, and then enable the PHY. Each group of lanes can then be individually controlled using the power_on()/ power_off() function for that generic PHY Signed-off-by: Alan Douglas <adouglas@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-10phy: Add driver for Cadence MHDP DisplayPort SD0801 PHYScott Telford
Add driver for the Cadence SD0801 "Torrent" PHY used with the Cadence MHDP DisplayPort Tx controller. Integration with the MHDP driver will be the subject of another commit. Signed-off-by: Scott Telford <stelford@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-29 19:06:11 +0000