| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit 367c820ef08082e68df8a3bc12e62393af21e4b5.
lockup_detector_init() makes heavy use of per-cpu variables and must be
called with preemption disabled. Usually, it's handled early during boot
in kernel_init_freeable(), before SMP has been initialised.
Since we do not know whether or not our PMU interrupt can be signalled
as an NMI until considerably later in the boot process, the Arm PMU
driver attempts to re-initialise the lockup detector off the back of a
device_initcall(). Unfortunately, this is called from preemptible
context and results in the following splat:
| BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
| caller is debug_smp_processor_id+0x20/0x2c
| CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.10.0+ #276
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0x0/0x3c0
| show_stack+0x20/0x6c
| dump_stack+0x2f0/0x42c
| check_preemption_disabled+0x1cc/0x1dc
| debug_smp_processor_id+0x20/0x2c
| hardlockup_detector_event_create+0x34/0x18c
| hardlockup_detector_perf_init+0x2c/0x134
| watchdog_nmi_probe+0x18/0x24
| lockup_detector_init+0x44/0xa8
| armv8_pmu_driver_init+0x54/0x78
| do_one_initcall+0x184/0x43c
| kernel_init_freeable+0x368/0x380
| kernel_init+0x1c/0x1cc
| ret_from_fork+0x10/0x30
Rather than bodge this with raw_smp_processor_id() or randomly disabling
preemption, simply revert the culprit for now until we figure out how to
do this properly.
Reported-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20201221162249.3119-1-lecopzer.chen@mediatek.com
Link: https://lore.kernel.org/r/20210112221855.10666-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The DDR Perf for i.MX8 is a system PMU whose AXI ID would different from
SoC to SoC. Need expose system PMU identifier for userspace which refer
to /sys/bus/event_source/devices/<PMU DEVICE>/identifier.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20201130114202.26057-3-qiangqing.zhang@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
With the recent feature added to enable perf events to use pseudo NMIs
as interrupts on platforms which support GICv3 or later, its now been
possible to enable hard lockup detector (or NMI watchdog) on arm64
platforms. So enable corresponding support.
One thing to note here is that normally lockup detector is initialized
just after the early initcalls but PMU on arm64 comes up much later as
device_initcall(). So we need to re-initialize lockup detection once
PMU has been initialized.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/1602060704-10921-1-git-send-email-sumit.garg@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
DDR Perf driver only supports free-running event counters(counter1/2/3)
now, this patch adds support for stop event counters.
Legacy SoCs:
Cycle counter(counter0) is a special counter, only count cycles. When
cycle counter overflow, it will lock all counters and generate an
interrupt. In ddr_perf_irq_handler, disable cycle counter then all
counters would stop at the same time, update all counters' count, then
enable cycle counter that all counters count again. During this process,
only clear cycle counter, no need to clear event counters since they are
free-running counters. They would continue counting after overflow and
do/while loop from ddr_perf_event_update can handle event counters
overflow case.
i.MX8MP:
Almost all is the same as legacy SoCs, the only difference is that, event
counters are not free-running any more. Like cycle counter, when event
counters overflow, they would stop counting unless clear the counter,
and no interrupt generate for event counters. So we should clear event
counters that let them re-count when cycle counter overflow, which ensure
event counters will not lose data.
This patch adds stop event counters support which would be compatible to
free-running event counters. We use the cycle counter to stop overflow
of the event counters.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20201027104451.15434-1-qiangqing.zhang@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
SMMU_PMCG_IIDR was added in the SMMUv3.3 spec.
For the perf tool to know the specific HW implementation, expose the
PMCG_IIDR contents only when set.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1602149181-237415-5-git-send-email-john.garry@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
To allow userspace to identify the specific implementation of the device,
add an "identifier" sysfs file.
Encoding is as follows (same for all uncore drivers):
hi1620: 0x0
hi1630: 0x30
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1602149181-237415-2-git-send-email-john.garry@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
fwnode is checked IS_ERR_OR_NULL in following check by
is_of_node() or is_acpi_device_node(), remove duplicate check.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1604644902-29655-1-git-send-email-wangqing@vivo.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
DMC-620 PMU supports total 10 counters which each is
independently programmable to different events and can
be started and stopped individually.
Currently, it only supports ACPI. Other platforms feel free to test and add
support for device tree.
Usage example:
#perf stat -e arm_dmc620_10008c000/clk_cycle_count/ -C 0
Get perf event for clk_cycle_count counter.
#perf stat -e arm_dmc620_10008c000/clkdiv2_allocate,mask=0x1f,match=0x2f,
incr=2,invert=1/ -C 0
The above example shows how to specify mask, match, incr,
invert parameters for clkdiv2_allocate event.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/1604518246-6198-1-git-send-email-tuanphan@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The node type field is an enum type, so print it as a 32-bit quantity
rather than as an unsigned short.
Link: https://lore.kernel.org/r/202009302350.QIzfkx62-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Ensure that the 'irq' field of 'struct arm_cmn_dtc' is a signed int
so that it can be compared '< 0'.
Link: https://lore.kernel.org/r/20200929170835.GA15956@embeddedor
Addresses-Coverity-ID: 1497488 ("Unsigned compared against 0")
Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add required PMU interrupt operations for NMIs. Request interrupt lines as
NMIs when possible, otherwise fall back to normal interrupts.
NMIs are only supported on the arm64 architecture with a GICv3 irqchip.
[Alexandru E.: Added that NMIs only work on arm64 + GICv3, print message
when PMU is using NMIs]
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org> (Developerbox)
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200924110706.254996-8-alexandru.elisei@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently the PMU interrupt can either be a normal irq or a percpu irq.
Supporting NMI will introduce two cases for each existing one. It becomes
a mess of 'if's when managing the interrupt.
Define sets of callbacks for operations commonly done on the interrupt. The
appropriate set of callbacks is selected at interrupt request time and
simplifies interrupt enabling/disabling and freeing.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org> (Developerbox)
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200924110706.254996-7-alexandru.elisei@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Initial driver for PMU event counting on the Arm CMN-600 interconnect.
CMN sports an obnoxiously complex distributed PMU system as part of
its debug and trace features, which can do all manner of things like
sampling, cross-triggering and generating CoreSight trace. This driver
covers the PMU functionality, plus the relevant aspects of watchpoints
for simply counting matching flits.
Tested-by: Tsahi Zidenberg <tsahee@amazon.com>
Tested-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In tx2_uncore_pmu_init_dev(), a call to acpi_dev_get_resources() is used
to create a list _CRS resources which is searched for the device base
address. There is an error check following this:
if (!rentry->res)
return NULL
In no case, will rentry->res be NULL, so the test is useless. Even
if the test worked, it comes before the resource list memory is
freed. None of this really matters as long as the ACPI table has
the memory resource. Let's clean it up so that it makes sense and
will give a meaningful error should firmware leave out the memory
resource.
Fixes: 69c32972d593 ("drivers/perf: Add Cavium ThunderX2 SoC UNCORE PMU driver")
Signed-off-by: Mark Salter <msalter@redhat.com>
Link: https://lore.kernel.org/r/20200915204110.326138-2-msalter@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This splat was reported on newer Fedora kernels booting on certain
X-gene based machines:
xgene-pmu APMC0D83:00: X-Gene PMU version 3
Unable to handle kernel read from unreadable memory at virtual \
address 0000000000004006
...
Call trace:
string+0x50/0x100
vsnprintf+0x160/0x750
devm_kvasprintf+0x5c/0xb4
devm_kasprintf+0x54/0x60
__devm_ioremap_resource+0xdc/0x1a0
devm_ioremap_resource+0x14/0x20
acpi_get_pmu_hw_inf.isra.0+0x84/0x15c
acpi_pmu_dev_add+0xbc/0x21c
acpi_ns_walk_namespace+0x16c/0x1e4
acpi_walk_namespace+0xb4/0xfc
xgene_pmu_probe_pmu_dev+0x7c/0xe0
xgene_pmu_probe.part.0+0x2c0/0x310
xgene_pmu_probe+0x54/0x64
platform_drv_probe+0x60/0xb4
really_probe+0xe8/0x4a0
driver_probe_device+0xe4/0x100
device_driver_attach+0xcc/0xd4
__driver_attach+0xb0/0x17c
bus_for_each_dev+0x6c/0xb0
driver_attach+0x30/0x40
bus_add_driver+0x154/0x250
driver_register+0x84/0x140
__platform_driver_register+0x54/0x60
xgene_pmu_driver_init+0x28/0x34
do_one_initcall+0x40/0x204
do_initcalls+0x104/0x144
kernel_init_freeable+0x198/0x210
kernel_init+0x20/0x12c
ret_from_fork+0x10/0x18
Code: 91000400 110004e1 eb08009f 540000c0 (38646846)
---[ end trace f08c10566496a703 ]---
This is due to use of an uninitialized local resource struct in the xgene
pmu driver. The thunderx2_pmu driver avoids this by using the resource list
constructed by acpi_dev_get_resources() rather than using a callback from
that function. The callback in the xgene driver didn't fully initialize
the resource. So get rid of the callback and search the resource list as
done by thunderx2.
Fixes: 832c927d119b ("perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver")
Signed-off-by: Mark Salter <msalter@redhat.com>
Link: https://lore.kernel.org/r/20200915204110.326138-1-msalter@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add support for probing device from ACPI node.
Each DSU ACPI node and its associated cpus are inside a cluster node.
Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1600106656-9542-1-git-send-email-tuanphan@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
MODULE_*** is used in HiSilicon uncore PMU drivers and is provided by
linux/module.h, but the header file is not directly included. Add the
missing include.
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1599186097-18599-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"It looks like a smaller batch of clk updates this time around.
In the core framework we just have some minor tweaks and a debugfs
feature, so not much to see there. The driver updates are fairly well
split between AT91 and Qualcomm clk support. Adding those two drivers
together equals about 50% of the diffstat.
Otherwise, the big amount of work this time was on supporting
Broadcom's Raspberry Pi firmware clks.
Highlights:
Core:
- Document clk_hw_round_rate() so it gets some more use
- Remove unused __clk_get_flags()
- Add a prepare/enable debugfs feature similar to rate setting
New Drivers:
- Add support for SAMA7G5 SoC clks
- Enable CPU clks on Qualcomm IPQ6018 SoCs
- Enable CPU clks on Qualcomm MSM8996 SoCs
- GPU clk support for Qualcomm SM8150 and SM8250 SoCs
- Audio clks on Qualcomm SC7180 SoCs
- Microchip Sparx5 DPLL clk
- Add support for the new Renesas RZ/G2H (R8A774E1) SoC
Updates:
- Make defines for bcm63xx-gate clks to use in DT
- Support BCM2711 SoC firmware clks
- Add HDMI clks for BCM2711 SoCs
- Add RTC related clks on Ingenic SoCs
- Support USB PHY clks on Ingenic SoCs
- Support gate clks on BCM6318 SoCs
- RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
- Use poll_timeout functions in Rockchip clk driver
- Support Rockchip rk3288w SoC variant
- Mark mac_lbtest critical on Rockchip rk3188
- Add CAAM clock support for i.MX vf610 driver
- Add MU root clock support for i.MX imx8mp driver
- Amlogic g12: add neural network accelerator clock sources
- Amlogic meson8: remove critical flag for main PLL divider
- Amlogic meson8: add video decoder clock gates
- Convert one more Renesas DT binding to json-schema
- Enhance critical clock handling on Renesas platforms to only
consider clocks that were enabled at boot time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits)
clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845
ipq806x: gcc: add support for child probe
clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static
clk: qcom: ipq8074: Add correct index for PCIe clocks
clk: <linux/clk-provider.h>: drop a duplicated word
clk: renesas: cpg-mssr: Add r8a774e1 support
dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1
clk: Drop duplicate selection in Kconfig
clk: qcom: smd: Add support for MSM8992/4 rpm clocks
clk: qcom: ipq8074: Add missing clocks for pcie
dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe
Replace HTTP links with HTTPS ones: Common CLK framework
clk: qcom: Add CPU clock driver for msm8996
dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
soc: qcom: Separate kryo l2 accessors from PMU driver
clk: meson: meson8b: add the vclk2_en gate clock
clk: meson: meson8b: add the vclk_en gate clock
clk: qcom: Fix return value check in apss_ipq6018_probe()
clk: bcm: dvp: Add missing module informations
clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 and cross-arch updates from Catalin Marinas:
"Here's a slightly wider-spread set of updates for 5.9.
Going outside the usual arch/arm64/ area is the removal of
read_barrier_depends() series from Will and the MSI/IOMMU ID
translation series from Lorenzo.
The notable arm64 updates include ARMv8.4 TLBI range operations and
translation level hint, time namespace support, and perf.
Summary:
- Removal of the tremendously unpopular read_barrier_depends()
barrier, which is a NOP on all architectures apart from Alpha, in
favour of allowing architectures to override READ_ONCE() and do
whatever dance they need to do to ensure address dependencies
provide LOAD -> LOAD/STORE ordering.
This work also offers a potential solution if compilers are shown
to convert LOAD -> LOAD address dependencies into control
dependencies (e.g. under LTO), as weakly ordered architectures will
effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at
LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic,
augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the
device ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions
and kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words"
Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org
Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits)
arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
arm64/mm: save memory access in check_and_switch_context() fast switch path
arm64: sigcontext.h: delete duplicated word
arm64: ptrace.h: delete duplicated word
arm64: pgtable-hwdef.h: delete duplicated words
bus: fsl-mc: Add ACPI support for fsl-mc
bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
of/irq: Make of_msi_map_rid() PCI bus agnostic
of/irq: make of_msi_map_get_device_domain() bus agnostic
dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
of/device: Add input id to of_dma_configure()
of/iommu: Make of_map_rid() PCI agnostic
ACPI/IORT: Add an input ID to acpi_dma_configure()
ACPI/IORT: Remove useless PCI bus walk
ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
arm64: enable time namespace support
arm64/vdso: Restrict splitting VVAR VMA
arm64/vdso: Handle faults on timens page
...
|
|
Forcefully unbinding PMU drivers during perf sampling will lead to
a kernel panic, because the perf upper-layer framework call a NULL
pointer in this situation.
To solve this issue, "suppress_bind_attrs" should be set to true, so
that bind/unbind can be disabled via sysfs and prevent unbinding PMU
drivers during perf sampling.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1594975763-32966-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When users try to remove PMU modules during perf sampling, kernel panic
will happen because the pmu->read() is a NULL pointer here.
INFO on HiSilicon hip08 platform as follow:
pc : hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu]
lr : hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu]
sp : ffff800010103e90
x29: ffff800010103e90 x28: ffff0027db0c0e40
x27: ffffa29a76f129d8 x26: ffffa29a77ceb000
x25: ffffa29a773a5000 x24: ffffa29a77392000
x23: ffffddffe5943f08 x22: ffff002784285960
x21: ffff002784285800 x20: ffff0027d2e76c80
x19: ffff0027842859e0 x18: ffff80003498bcc8
x17: ffffa29a76afe910 x16: ffffa29a7583f530
x15: 16151a1512061a1e x14: 0000000000000000
x13: ffffa29a76f1e238 x12: 0000000000000001
x11: 0000000000000400 x10: 00000000000009f0
x9 : ffff8000107b3e70 x8 : ffff0027db0c1890
x7 : ffffa29a773a7000 x6 : 00000007f5131013
x5 : 00000007f5131013 x4 : 09f257d417c00000
x3 : 00000002187bd7ce x2 : ffffa29a38f0f0d8
x1 : ffffa29a38eae268 x0 : ffff0027d2e76c80
Call trace:
hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu]
hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu]
__perf_event_read+0x1a0/0x1f8
flush_smp_call_function_queue+0xa0/0x160
generic_smp_call_function_single_interrupt+0x18/0x20
handle_IPI+0x31c/0x4dc
gic_handle_irq+0x2c8/0x310
el1_irq+0xcc/0x180
arch_cpu_idle+0x4c/0x20c
default_idle_call+0x20/0x30
do_idle+0x1b4/0x270
cpu_startup_entry+0x28/0x30
secondary_start_kernel+0x1a4/0x1fc
To solve the above issue, current module should be registered to kernel,
so that try_module_get() can be invoked when perf sampling starts. This
adds the reference counting of module and could prevent users from removing
modules during sampling.
Reported-by: Haifeng Wang <wang.wanghaifeng@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1594891165-8228-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Use the devm_platform_get_and_ioremap_resource to simplify the code
a bit.
Signed-off-by: Jay Chen <jkchen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20200706112246.92220-2-jkchen@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The driver provides kernel level API for other drivers
to access the MSM8996 L2 cache registers.
Separating the L2 access code from the PMU driver and
making it public to allow other drivers use it.
The accesses must be separated with a single spinlock,
maintained in this driver.
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1593766185-16346-2-git-send-email-loic.poulain@linaro.org
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"arm64 fixes that came in during the merge window.
There will probably be more to come, but it doesn't seem like it's
worth me sitting on these in the meantime.
- Fix SCS debug check to report max stack usage in bytes as advertised
- Fix typo: CONFIG_FTRACE_WITH_REGS => CONFIG_DYNAMIC_FTRACE_WITH_REGS
- Fix incorrect mask in HiSilicon L3C perf PMU driver
- Fix compat vDSO compilation under some toolchain configurations
- Fix false UBSAN warning from ACPI IORT parsing code
- Fix booting under bootloaders that ignore TEXT_OFFSET
- Annotate debug initcall function with '__init'"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: warn on incorrect placement of the kernel by the bootloader
arm64: acpi: fix UBSAN warning
arm64: vdso32: add CONFIG_THUMB2_COMPAT_VDSO
drivers/perf: hisi: Fix wrong value for all counters enable
arm64: ftrace: Change CONFIG_FTRACE_WITH_REGS to CONFIG_DYNAMIC_FTRACE_WITH_REGS
arm64: debug: mark a function as __init to save some memory
scs: Report SCS usage in bytes rather than number of entries
|
|
In L3C uncore PMU drivers, bit16 is used to control all counters enable &
disable. Wrong value is given in the driver and its default value is 1'b1,
it can work because each PMU counter has its own control bits too.
Let's fix the wrong value.
Fixes: 2940bc433370 ("perf: hisi: Add support for HiSilicon SoC L3C PMU driver")
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1591350221-32275-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A sizeable pile of arm64 updates for 5.8.
Summary below, but the big two features are support for Branch Target
Identification and Clang's Shadow Call stack. The latter is currently
arm64-only, but the high-level parts are all in core code so it could
easily be adopted by other architectures pending toolchain support
Branch Target Identification (BTI):
- Support for ARMv8.5-BTI in both user- and kernel-space. This allows
branch targets to limit the types of branch from which they can be
called and additionally prevents branching to arbitrary code,
although kernel support requires a very recent toolchain.
- Function annotation via SYM_FUNC_START() so that assembly functions
are wrapped with the relevant "landing pad" instructions.
- BPF and vDSO updates to use the new instructions.
- Addition of a new HWCAP and exposure of BTI capability to userspace
via ID register emulation, along with ELF loader support for the
BTI feature in .note.gnu.property.
- Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
Shadow Call Stack (SCS):
- Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each task
that holds only return addresses. This protects function return
control flow from buffer overruns on the main stack.
- Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
- Core support for SCS, should other architectures want to use it
too.
- SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
CPU feature detection:
- Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a concern
for KVM, which disabled support for 32-bit guests on such a system.
- Addition of new ID registers and fields as the architecture has
been extended.
Perf and PMU drivers:
- Minor fixes and cleanups to system PMU drivers.
Hardware errata:
- Unify KVM workarounds for VHE and nVHE configurations.
- Sort vendor errata entries in Kconfig.
Secure Monitor Call Calling Convention (SMCCC):
- Update to the latest specification from Arm (v1.2).
- Allow PSCI code to query the SMCCC version.
Software Delegated Exception Interface (SDEI):
- Unexport a bunch of unused symbols.
- Minor fixes to handling of firmware data.
Pointer authentication:
- Add support for dumping the kernel PAC mask in vmcoreinfo so that
the stack can be unwound by tools such as kdump.
- Simplification of key initialisation during CPU bringup.
BPF backend:
- Improve immediate generation for logical and add/sub instructions.
vDSO:
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
ACPI:
- Work around for an ambiguity in the IORT specification relating to
the "num_ids" field.
- Support _DMA method for all named components rather than only PCIe
root complexes.
- Minor other IORT-related fixes.
Miscellaneous:
- Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
- Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h
KVM: arm64: Check advertised Stage-2 page size capability
arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
ACPI/IORT: Remove the unused __get_pci_rid()
arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
arm64/cpufeature: Introduce ID_MMFR5 CPU register
arm64/cpufeature: Introduce ID_DFR1 CPU register
arm64/cpufeature: Introduce ID_PFR2 CPU register
arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
arm64: mm: Add asid_gen_match() helper
firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
arm64: vdso: Fix CFI directives in sigreturn trampoline
arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
...
|
|
Currently when trying to remove the SMMUv3 PMU module we get a
WARN_ON_ONCE from free_irq(), because the affinity hint set during probe
hasn't been properly cleared.
[ 238.878383] WARNING: CPU: 0 PID: 175 at kernel/irq/manage.c:1744 free_irq+0x324/0x358
...
[ 238.897263] Call trace:
[ 238.897998] free_irq+0x324/0x358
[ 238.898792] devm_irq_release+0x18/0x28
[ 238.899189] release_nodes+0x1b0/0x228
[ 238.899984] devres_release_all+0x38/0x60
[ 238.900779] device_release_driver_internal+0x10c/0x1d0
[ 238.901574] driver_detach+0x50/0xe0
[ 238.902368] bus_remove_driver+0x5c/0xd8
[ 238.903448] driver_unregister+0x30/0x60
[ 238.903958] platform_driver_unregister+0x14/0x20
[ 238.905075] arm_smmu_pmu_exit+0x1c/0xecc [arm_smmuv3_pmu]
[ 238.905547] __arm64_sys_delete_module+0x14c/0x260
[ 238.906342] el0_svc_common.constprop.0+0x74/0x178
[ 238.907355] do_el0_svc+0x24/0x90
[ 238.907932] el0_sync_handler+0x11c/0x198
[ 238.908979] el0_sync+0x158/0x180
Just like the other perf drivers, clear the affinity hint before
releasing the device.
Fixes: 7d839b4b9e00 ("perf/smmuv3: Add arm64 smmuv3 pmu driver")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200422084805.237738-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This patch lets HiSilicon uncore PMU driver can be built as modules.
A common module and three specific uncore PMU driver modules will be built.
Export necessary functions in hisi_uncore_pmu module, and change
irq_set_affinity to irq_set_affinity_hint to pass compile.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Tested-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1588820305-174479-1-git-send-email-wangzhou1@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix up one typo: wr_dr_64b -> wr_ddr_64b.
Fixes: 2bab3cf9104c ("perf: hisi: Add support for HiSilicon SoC HHA PMU driver")
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1587643530-34357-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
platform_get_irq() already screams on failure, so the redundant call to
dev_err() can be removed.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200402120330.19468-1-tangbin@cmss.chinamobile.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
platform_get_irq() already screams on failure, so the redundant call to
dev_err() can be removed.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200402115940.4928-1-tangbin@cmss.chinamobile.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Open access to monitoring for CAP_PERFMON privileged process. Providing
the access under CAP_PERFMON capability singly, without the rest of
CAP_SYS_ADMIN credentials, excludes chances to misuse the credentials
and makes operation more secure.
CAP_PERFMON implements the principle of least privilege for performance
monitoring and observability operations (POSIX IEEE 1003.1e 2.2.2.39
principle of least privilege: A security design principle that states
that a process or program be granted only those privileges (e.g.,
capabilities) necessary to accomplish its legitimate function, and only
for the time that such privileges are actually required)
For backward compatibility reasons access to the monitoring remains open
for CAP_SYS_ADMIN privileged processes but CAP_SYS_ADMIN usage for
secure monitoring is discouraged with respect to CAP_PERFMON capability.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-doc@vger.kernel.org
Cc: linux-man@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: selinux@vger.kernel.org
Link: http://lore.kernel.org/lkml/4ec1d6f7-548c-8d1c-f84a-cebeb9674e4e@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The bulk is in-kernel pointer authentication, activity monitors and
lots of asm symbol annotations. I also queued the sys_mremap() patch
commenting the asymmetry in the address untagging.
Summary:
- In-kernel Pointer Authentication support (previously only offered
to user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
PMU init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor,
cpu_do_switch_mm() converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
mm/mremap: Add comment explaining the untagging behaviour of mremap()
arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
arm64: Introduce get_cpu_ops() helper function
arm64: Rename cpu_read_ops() to init_cpu_ops()
arm64: Declare ACPI parking protocol CPU operation if needed
arm64: move kimage_vaddr to .rodata
arm64: use mov_q instead of literal ldr
arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
lkdtm: arm64: test kernel pointer authentication
arm64: compile the kernel with ptrauth return address signing
kconfig: Add support for 'as-option'
arm64: suspend: restore the kernel ptrauth keys
arm64: __show_regs: strip PAC from lr in printk
arm64: unwind: strip PAC from kernel addresses
arm64: mask PAC bits of __builtin_return_address
arm64: initialize ptrauth keys for kernel booting task
arm64: initialize and switch ptrauth kernel keys
arm64: enable ptrauth earlier
arm64: cpufeature: handle conflicts based on capability
arm64: cpufeature: Move cpu capability helpers inside C file
...
|
|
snprintf() is a hard-to-use function, it's especially difficult to use
it for concatenating substrings in a buffer with a limited size.
Since snprintf() returns the would-be-output size, not the actual
size, the subsequent use of snprintf() may point to the incorrect
position easily. Although the current code doesn't actually overflow
the buffer, it's an incorrect usage.
This patch replaces such snprintf() calls with a safer version,
scnprintf().
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix bogus NULL checks on the return value of acpi_cpu_get_madt_gicc()
by checking for a 0 'gicc->performance_interrupt' value instead.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When disabling a counter from ddr_perf_event_stop(), the counter value
is reset to 0 at the same time.
Preserve the counter value by performing a read-modify-write of the
PMU register and clearing only the enable bit.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We already check that the 'nr_pages' is > 2, so there's no need to check
that it's != 0 later on.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Even though a SMMUv3 PMCG implementation may use an MSI as the form of
interrupt source, the kernel would still complain that it does not find
the wired (GSIV) interrupt in this case:
root@(none)$ dmesg | grep arm-smmu-v3-pmcg | grep "not found"
[ 59.237219] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.8.auto: IRQ index 0 not found
[ 59.322841] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.9.auto: IRQ index 0 not found
[ 59.422155] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.10.auto: IRQ index 0 not found
[ 59.539014] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.11.auto: IRQ index 0 not found
[ 59.640329] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.12.auto: IRQ index 0 not found
[ 59.743112] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.13.auto: IRQ index 0 not found
[ 59.880577] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.14.auto: IRQ index 0 not found
[ 60.017528] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.15.auto: IRQ index 0 not found
Use platform_get_irq_optional() to silence the warning.
If neither interrupt source is found, then the driver will still warn that
IRQ setup errored and the probe will fail.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This driver allocates a dynamic cpu hotplug state but never releases it.
If reloaded in a loop it will quickly trigger a WARN message:
"No more dynamic states available for CPU hotplug"
Fix by calling cpuhp_remove_multi_state on remove like several other
perf pmu drivers.
Also fix the cleanup logic on probe error paths: add the missing
cpuhp_remove_multi_state call and properly check the return value from
cpuhp_state_add_instant_nocalls.
Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf")
Acked-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
hisi_read_sccl_and_ccl_id is not readable and its comment is a little
confused, so simplify the function and its comment as Mark's suggestion.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In smmu_pmu_probe(), there is put_cpu() in the error path,
which is wrong because we use raw_smp_processor_id() to
get the cpu ID, not get_cpu(), remove it.
While we are at it, kill 'out_cpuhp_err' altogether and
just return err if we fail to add the hotplug instance.
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
For some HiSilicon platform, the originally designed SCCL_ID and CCL_ID
are not satisfied with much rich topology when the MT is set, so we
extend the SCCL_ID to MPIDR[aff3] and CCL_ID to MPIDR[aff2]. Let's
update this for HiSilicon uncore PMU driver.
Cc: John Garry <john.garry@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
caps/filter indicates whether HW supports AXI ID filter or not.
caps/enhanced_filter indicates whether HW supports enhanced AXI ID filter
or not.
Users can check filter features from userspace with these attributions.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
[will: reworked cap switch to be less error-prone]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add driver for DDR PMU in i.MX8MPlus.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
With DDR_CAP_AXI_ID_FILTER quirk, indicating HW supports AXI ID filter
which only can get bursts from DDR transaction, i.e. DDR read/write
requests.
This patch add DDR_CAP_AXI_ID_ENHANCED_FILTER quirk, indicating HW
supports AXI ID filter which can get bursts and bytes from DDR
transaction at the same time. We hope PMU always return bytes in the
driver due to it is more meaningful for users.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
CCPI2 is a low-latency high-bandwidth serial interface for inter socket
connectivity of ThunderX2 processors.
CCPI2 PMU supports up to 8 counters per socket. Counters are
independently programmable to different events and can be started and
stopped individually. The CCPI2 counters are 64-bit and do not overflow
in normal operation.
Signed-off-by: Ganapatrao Prabhakerrao Kulkarni <gkulkarni@marvell.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add compatible string for the ARM CCN-512 interconnect
Acked-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Marek Bykowski <marek.bykowski@gmail.com>
Signed-off-by: Boleslaw Malecki <boleslaw.malecki@tieto.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
Will Deacon
Joakim Zhang
Sumit Garg
John Garry
Wang Qing
Tuan Phan
Julien Thierry
Robin Murphy
Mark Salter
Shaokun Zhang
Gustavo A. R. Silva
Linus Torvalds
Qi Liu
Jay Chen
Ilia Lin
Jean-Philippe Brucker
Zhou Wang
Tang Bin
Alexey Budankov
Takashi Iwai
luanshi
Leonard Crestez
Hanjun Guo
Ganapatrao Prabhakerrao Kulkarni
Marek Bykowski
YueHaibing