aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pci
AgeCommit message (Collapse)Author
2024-03-01PCI/MSI: Prevent MSI hardware interrupt number truncationVidya Sagar
commit db744ddd59be798c2627efbfc71f707f5a935a40 upstream. While calculating the hardware interrupt number for a MSI interrupt, the higher bits (i.e. from bit-5 onwards a.k.a domain_nr >= 32) of the PCI domain number gets truncated because of the shifted value casting to return type of pci_domain_nr() which is 'int'. This for example is resulting in same hardware interrupt number for devices 0019:00:00.0 and 0039:00:00.0. To address this cast the PCI domain number to 'irq_hw_number_t' before left shifting it to calculate the hardware interrupt number. Please note that this fixes the issue only on 64-bit systems and doesn't change the behavior for 32-bit systems i.e. the 32-bit systems continue to have the issue. Since the issue surfaces only if there are too many PCIe controllers in the system which usually is the case in modern server systems and they don't tend to run 32-bit kernels. Fixes: 3878eaefb89a ("PCI/MSI: Enhance core to support hierarchy irqdomain") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240115135649.708536-1-vidyas@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01PCI: dwc: Fix a 64bit bug in dw_pcie_ep_raise_msix_irq()Dan Carpenter
commit b5d1b4b46f856da1473c7ba9a5cdfcb55c9b2478 upstream. The "msg_addr" variable is u64. However, the "aligned_offset" is an unsigned int. This means that when the code does: msg_addr &= ~aligned_offset; it will unintentionally zero out the high 32 bits. Use ALIGN_DOWN() to do the alignment instead. Fixes: 2217fffcd63f ("PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support") Link: https://lore.kernel.org/r/af59c7ad-ab93-40f7-ad4a-7ac0b14d37f5@moroto.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23PCI/AER: Decode Requester ID when no error info foundBjorn Helgaas
[ Upstream commit 1291b716bbf969e101d517bfb8ba18d958f758b8 ] When a device with AER detects an error, it logs error information in its own AER Error Status registers. It may send an Error Message to the Root Port (RCEC in the case of an RCiEP), which logs the fact that an Error Message was received (Root Error Status) and the Requester ID of the message source (Error Source Identification). aer_print_port_info() prints the Requester ID from the Root Port Error Source in the usual Linux "bb:dd.f" format, but when find_source_device() finds no error details in the hierarchy below the Root Port, it printed the raw Requester ID without decoding it. Decode the Requester ID in the usual Linux format so it matches other messages. Sample message changes: - pcieport 0000:00:1c.5: AER: Correctable error received: 0000:00:1c.5 - pcieport 0000:00:1c.5: AER: can't find device of ID00e5 + pcieport 0000:00:1c.5: AER: Correctable error message received from 0000:00:1c.5 + pcieport 0000:00:1c.5: AER: found no error details for 0000:00:1c.5 Link: https://lore.kernel.org/r/20231206224231.732765-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23PCI: Fix 64GT/s effective data rate calculationIlpo Järvinen
[ Upstream commit ac4f1897fa5433a1b07a625503a91b6aa9d7e643 ] Unlike the lower rates, the PCIe 64GT/s Data Rate uses 1b/1b encoding, not 128b/130b (PCIe r6.1 sec 1.2, Table 1-1). Correct the PCIE_SPEED2MBS_ENC() calculation to reflect that. Link: https://lore.kernel.org/r/20240102172701.65501-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23PCI: switchtec: Fix stdev_release() crash after surprise hot removeDaniel Stodden
[ Upstream commit df25461119d987b8c81d232cfe4411e91dcabe66 ] A PCI device hot removal may occur while stdev->cdev is held open. The call to stdev_release() then happens during close or exit, at a point way past switchtec_pci_remove(). Otherwise the last ref would vanish with the trailing put_device(), just before return. At that later point in time, the devm cleanup has already removed the stdev->mmio_mrpc mapping. Also, the stdev->pdev reference was not a counted one. Therefore, in DMA mode, the iowrite32() in stdev_release() will cause a fatal page fault, and the subsequent dma_free_coherent(), if reached, would pass a stale &stdev->pdev->dev pointer. Fix by moving MRPC DMA shutdown into switchtec_pci_remove(), after stdev_kill(). Counting the stdev->pdev ref is now optional, but may prevent future accidents. Reproducible via the script at https://lore.kernel.org/r/20231113212150.96410-1-dns@arista.com Link: https://lore.kernel.org/r/20231122042316.91208-2-dns@arista.com Signed-off-by: Daniel Stodden <dns@arista.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23PCI: Only override AMD USB controller if requiredGuilherme G. Piccoli
[ Upstream commit e585a37e5061f6d5060517aed1ca4ccb2e56a34c ] By running a Van Gogh device (Steam Deck), the following message was noticed in the kernel log: pci 0000:04:00.3: PCI class overridden (0x0c03fe -> 0x0c03fe) so dwc3 driver can claim this instead of xhci Effectively this means the quirk executed but changed nothing, since the class of this device was already the proper one (likely adjusted by newer firmware versions). Check and perform the override only if necessary. Link: https://lore.kernel.org/r/20231120160531.361552-1-gpiccoli@igalia.com Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Vicki Pfau <vi@endrift.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23PCI: Add no PM reset quirk for NVIDIA Spectrum devicesIdo Schimmel
[ Upstream commit 3ed48c80b28d8dcd584d6ddaf00c75b7673e1a05 ] Spectrum-{1,2,3,4} devices report that a D3hot->D0 transition causes a reset (i.e., they advertise NoSoftRst-). However, this transition does not have any effect on the device: It continues to be operational and network ports remain up. Advertising this support makes it seem as if a PM reset is viable for these devices. Mark it as unavailable to skip it when testing reset methods. Before: # cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method pm bus After: # cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method bus Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25PCI: keystone: Fix race condition when initializing PHYsSiddharth Vadapalli
[ Upstream commit c12ca110c613a81cb0f0099019c839d078cd0f38 ] The PCI driver invokes the PHY APIs using the ks_pcie_enable_phy() function. The PHY in this case is the Serdes. It is possible that the PCI instance is configured for two lane operation across two different Serdes instances, using one lane of each Serdes. In such a configuration, if the reference clock for one Serdes is provided by the other Serdes, it results in a race condition. After the Serdes providing the reference clock is initialized by the PCI driver by invoking its PHY APIs, it is not guaranteed that this Serdes remains powered on long enough for the PHY APIs based initialization of the dependent Serdes. In such cases, the PLL of the dependent Serdes fails to lock due to the absence of the reference clock from the former Serdes which has been powered off by the PM Core. Fix this by obtaining reference to the PHYs before invoking the PHY initialization APIs and releasing reference after the initialization is complete. Link: https://lore.kernel.org/linux-pci/20230927041845.1222080-1-s-vadapalli@ti.com Fixes: 49229238ab47 ("PCI: keystone: Cleanup PHY handling") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Acked-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25PCI: mediatek: Clear interrupt status before dispatching handlerqizhong cheng
commit 4e11c29873a8a296a20f99b3e03095e65ebf897d upstream. We found a failure when using the iperf tool during WiFi performance testing, where some MSIs were received while clearing the interrupt status, and these MSIs cannot be serviced. The interrupt status can be cleared even if the MSI status remains pending. As such, given the edge-triggered interrupt type, its status should be cleared before being dispatched to the handler of the underling device. [kwilczynski: commit log, code comment wording] Link: https://lore.kernel.org/linux-pci/20231211094923.31967-1-jianjun.wang@mediatek.com Fixes: 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and MT7622") Signed-off-by: qizhong cheng <qizhong.cheng@mediatek.com> Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: rewrap comment] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-25PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment supportNiklas Cassel
commit 2217fffcd63f86776c985d42e76daa43a56abdf1 upstream. Commit 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address") modified dw_pcie_ep_raise_msix_irq() to support iATUs which require a specific alignment. However, this support cannot have been properly tested. The whole point is for the iATU to map an address that is aligned, using dw_pcie_ep_map_addr(), and then let the writel() write to ep->msi_mem + aligned_offset. Thus, modify the address that is mapped such that it is aligned. With this change, dw_pcie_ep_raise_msix_irq() matches the logic in dw_pcie_ep_raise_msi_irq(). Link: https://lore.kernel.org/linux-pci/20231128132231.2221614-1-nks@flawful.org Fixes: 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: stable@vger.kernel.org # 5.7 Cc: Kishon Vijay Abraham I <kishon@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-25PCI: Add ACS quirk for more Zhaoxin Root PortsLeoLiuoc
commit e367e3c765f5477b2e79da0f1399aed49e2d1e37 upstream. Add more Root Port Device IDs to pci_quirk_zhaoxin_pcie_ports_acs() for some new Zhaoxin platforms. Fixes: 299bd044a6f3 ("PCI: Add ACS quirk for Zhaoxin Root/Downstream Ports") Link: https://lore.kernel.org/r/20231211091543.735903-1-LeoLiu-oc@zhaoxin.com Signed-off-by: LeoLiuoc <LeoLiu-oc@zhaoxin.com> [bhelgaas: update subject, drop changelog, add Fixes, add stable tag, fix whitespace, wrap code comment] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 5.7 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-15Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"Bjorn Helgaas
commit f93e71aea6c60ebff8adbd8941e678302d377869 upstream. This reverts commit 08d0cc5f34265d1a1e3031f319f594bd1970976c. Michael reported that when attempting to resume from suspend to RAM on ASUS mini PC PN51-BB757MDE1 (DMI model: MINIPC PN51-E1), 08d0cc5f3426 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()") caused a 12-second delay with no output, followed by a reboot. Workarounds include: - Reverting 08d0cc5f3426 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()") - Booting with "pcie_aspm=off" - Booting with "pcie_aspm.policy=performance" - "echo 0 | sudo tee /sys/bus/pci/devices/0000:03:00.0/link/l1_aspm" before suspending - Connecting a USB flash drive Link: https://lore.kernel.org/r/20240102232550.1751655-1-helgaas@kernel.org Fixes: 08d0cc5f3426 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()") Reported-by: Michael Schaller <michael@5challer.de> Link: https://lore.kernel.org/r/76c61361-b8b4-435f-a9f1-32b716763d62@5challer.de Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20PCI: loongson: Limit MRRS to 256Jiaxun Yang
commit ef61a0405742a9f7f6051bc6fd2f017d87d07911 upstream. This is a partial revert of 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS increases") for MIPS-based Loongson. Some MIPS Loongson systems don't support arbitrary Max_Read_Request_Size (MRRS) settings. 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS increases") worked around that by (1) assuming that firmware configured MRRS to the maximum supported value and (2) preventing the PCI core from increasing MRRS. Unfortunately, some firmware doesn't set that maximum MRRS correctly, which results in devices not being initialized correctly. One symptom, from the Debian report below, is this: ata4.00: exception Emask 0x0 SAct 0x20000000 SErr 0x0 action 0x6 frozen ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/20:e8:00:f0:e1/00:00:00:00:00/40 tag 29 ncq dma 16384 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link Limit MRRS to 256 because MIPS Loongson with higher MRRS support is considered rare. This must be done at device enablement stage because the MRRS setting may get lost if PCI_COMMAND_MASTER on the parent bridge is cleared, and we are only sure parent bridge is enabled at this point. Fixes: 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS increases") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217680 Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1035587 Link: https://lore.kernel.org/r/20231201115028.84351-1-jiaxun.yang@flygoat.com Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Huacai Chen <chenhuacai@loongson.cn> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20Revert "PCI: acpiphp: Reassign resources on bridge if necessary"Bjorn Helgaas
commit 5df12742b7e3aae2594a30a9d14d5d6e9e7699f4 upstream. This reverts commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 and the subsequent fix to it: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") 40613da52b13 fixed a problem where hot-adding a device with large BARs failed if the bridge windows programmed by firmware were not large enough. cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") fixed a problem with 40613da52b13: an ACPI hot-add of a device on a PCI root bus (common in the virt world) or firmware sending ACPI Bus Check to non-existent Root Ports (e.g., on Dell Inspiron 7352/0W6WV0) caused a NULL pointer dereference and suspend/resume hangs. Unfortunately the combination of 40613da52b13 and cc22522fd55e caused other problems: - Fiona reported that hot-add of SCSI disks in QEMU virtual machine fails sometimes. - Dongli reported a similar problem with hot-add of SCSI disks. - Jonathan reported a console freeze during boot on bare metal due to an error in radeon GPU initialization. Revert both patches to avoid adding these problems. This means we will again see the problems with hot-adding devices with large BARs and the NULL pointer dereferences and suspend/resume issues that 40613da52b13 and cc22522fd55e were intended to fix. Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") Fixes: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") Reported-by: Fiona Ebner <f.ebner@proxmox.com> Closes: https://lore.kernel.org/r/9eb669c0-d8f2-431d-a700-6da13053ae54@proxmox.com Reported-by: Dongli Zhang <dongli.zhang@oracle.com> Closes: https://lore.kernel.org/r/3c4a446a-b167-11b8-f36f-d3c1b49b42e9@oracle.com Reported-by: Jonathan Woithe <jwoithe@just42.net> Closes: https://lore.kernel.org/r/ZXpaNCLiDM+Kv38H@marvin.atrad.com.au Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28PCI: keystone: Don't discard .probe() callbackUwe Kleine-König
commit 7994db905c0fd692cf04c527585f08a91b560144 upstream. The __init annotation makes the ks_pcie_probe() function disappear after booting completes. However a device can also be bound later. In that case, we try to call ks_pcie_probe(), but the backing memory is likely already overwritten. The right thing to do is do always have the probe callback available. Note that the (wrong) __refdata annotation prevented this issue to be noticed by modpost. Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver") Link: https://lore.kernel.org/r/20231001170254.2506508-5-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28PCI: keystone: Don't discard .remove() callbackUwe Kleine-König
commit 200bddbb3f5202bbce96444fdc416305de14f547 upstream. With CONFIG_PCIE_KEYSTONE=y and ks_pcie_remove() marked with __exit, the function is discarded from the driver. In this case a bound device can still get unbound, e.g via sysfs. Then no cleanup code is run resulting in resource leaks or worse. The right thing to do is do always have the remove callback available. Note that this driver cannot be compiled as a module, so ks_pcie_remove() was always discarded before this change and modpost couldn't warn about this issue. Furthermore the __ref annotation also prevents a warning. Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver") Link: https://lore.kernel.org/r/20231001170254.2506508-4-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28PCI: exynos: Don't discard .remove() callbackUwe Kleine-König
commit 83a939f0fdc208ff3639dd3d42ac9b3c35607fd2 upstream. With CONFIG_PCI_EXYNOS=y and exynos_pcie_remove() marked with __exit, the function is discarded from the driver. In this case a bound device can still get unbound, e.g via sysfs. Then no cleanup code is run resulting in resource leaks or worse. The right thing to do is do always have the remove callback available. This fixes the following warning by modpost: WARNING: modpost: drivers/pci/controller/dwc/pci-exynos: section mismatch in reference: exynos_pcie_driver+0x8 (section: .data) -> exynos_pcie_remove (section: .exit.text) (with ARCH=x86_64 W=1 allmodconfig). Fixes: 340cba6092c2 ("pci: Add PCIe driver for Samsung Exynos") Link: https://lore.kernel.org/r/20231001170254.2506508-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()Heiner Kallweit
commit 8e37372ad0bea4c9b4712d9943f6ae96cff9491f upstream. aspm_attr_store_common(), which handles sysfs control of ASPM, has the same problem as fb097dcd5a28 ("PCI/ASPM: Disable only ASPM_STATE_L1 when driver disables L1"): disabling L1 adds only ASPM_L1 (but not any of the L1.x substates) to the "aspm_disable" mask. Enabling one substate, e.g., L1.1, via sysfs removes ASPM_L1 from the disable mask. Since disabling L1 via sysfs doesn't add any of the substates to the disable mask, enabling L1.1 actually enables *all* the substates. In this scenario: - Write 0 to "l1_aspm" to disable L1 - Write 1 to "l1_1_aspm" to enable L1.1 the intention is to disable L1 and all L1.x substates, then enable just L1.1, but in fact, *all* L1.x substates are enabled. Fix this by explicitly disabling all the L1.x substates when disabling L1. Fixes: 72ea91afbfb0 ("PCI/ASPM: Add sysfs attributes for controlling ASPM link states") Link: https://lore.kernel.org/r/6ba7dd79-9cfe-4ed0-a002-d99cb842f361@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28PCI/sysfs: Protect driver's D3cold preference from user spaceLukas Wunner
commit 70b70a4307cccebe91388337b1c85735ce4de6ff upstream. struct pci_dev contains two flags which govern whether the device may suspend to D3cold: * no_d3cold provides an opt-out for drivers (e.g. if a device is known to not wake from D3cold) * d3cold_allowed provides an opt-out for user space (default is true, user space may set to false) Since commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend"), the user space setting overwrites the driver setting. Essentially user space is trusted to know better than the driver whether D3cold is working. That feels unsafe and wrong. Assume that the change was introduced inadvertently and do not overwrite no_d3cold when d3cold_allowed is modified. Instead, consider d3cold_allowed in addition to no_d3cold when choosing a suspend state for the device. That way, user space may opt out of D3cold if the driver hasn't, but it may no longer force an opt in if the driver has opted out. Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") Link: https://lore.kernel.org/r/b8a7f4af2b73f6b506ad8ddee59d747cbf834606.1695025365.git.lukas@wunner.de Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirkBjorn Helgaas
[ Upstream commit 04e82fa5951ca66495d7b05665eff673aa3852b4 ] Use FIELD_GET() to remove dependences on the field position, i.e., the shift value. No functional change intended. Separate because this isn't as trivial as the other FIELD_GET() changes. See 907830b0fc9e ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse") Link: https://lore.kernel.org/r/20231010204436.1000644-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28PCI: Disable ATS for specific Intel IPU E2000 devicesBartosz Pawlowski
[ Upstream commit a18615b1cfc04f00548c60eb9a77e0ce56e848fd ] Due to a hardware issue in A and B steppings of Intel IPU E2000, it expects wrong endianness in ATS invalidation message body. This problem can lead to outdated translations being returned as valid and finally cause system instability. To prevent such issues, add quirk_intel_e2000_no_ats() to disable ATS for vulnerable IPU E2000 devices. Link: https://lore.kernel.org/r/20230908143606.685930-3-bartosz.pawlowski@intel.com Signed-off-by: Bartosz Pawlowski <bartosz.pawlowski@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28PCI: Extract ATS disabling to a helper functionBartosz Pawlowski
[ Upstream commit f18b1137d38c091cc8c16365219f0a1d4a30b3d1 ] Introduce quirk_no_ats() helper function to provide a standard way to disable ATS capability in PCI quirks. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230908143606.685930-2-bartosz.pawlowski@intel.com Signed-off-by: Bartosz Pawlowski <bartosz.pawlowski@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28PCI: Use FIELD_GET() to extract Link WidthIlpo Järvinen
[ Upstream commit d1f9b39da4a5347150246871325190018cda8cb3 ] Use FIELD_GET() to extract PCIe Negotiated and Maximum Link Width fields instead of custom masking and shifting. Link: https://lore.kernel.org/r/20230919125648.1920-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: drop duplicate include of <linux/bitfield.h>] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fieldsIlpo Järvinen
[ Upstream commit 759574abd78e3b47ec45bbd31a64e8832cf73f97 ] Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of custom masking and shifting. Similarly, change custom code that misleadingly used PCI_EXP_LNKSTA_NLW_SHIFT to prepare value for PCI_EXP_LNKCAP write to use FIELD_PREP() with correct field define (PCI_EXP_LNKCAP_MLW). Link: https://lore.kernel.org/r/20230919125648.1920-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-08PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD deviceVicki Pfau
commit 7e6f3b6d2c352b5fde37ce3fed83bdf6172eebd4 upstream. The AMD VanGogh SoC contains a DesignWare USB3 Dual-Role Device that can be operated as either a USB Host or a USB Device, similar to on the AMD Nolan platform. be6646bfbaec ("PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD device") added a quirk to let the dwc3 driver claim the Nolan device since it provides more specific support. Extend that quirk to include the VanGogh SoC USB3 device. Link: https://lore.kernel.org/r/20230927202212.2388216-1-vi@endrift.com Signed-off-by: Vicki Pfau <vi@endrift.com> [bhelgaas: include be6646bfbaec reference, add stable tag] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-23PCI: fu740: Set the number of MSI vectorsYong-Xuan Wang
[ Upstream commit 551a60e1225e71fff8efd9390204c505b0870e0f ] The iMSI-RX module of the DW PCIe controller provides multiple sets of MSI_CTRL_INT_i_* registers, and each set is capable of handling 32 MSI interrupts. However, the fu740 PCIe controller driver only enabled one set of MSI_CTRL_INT_i_* registers, as the total number of supported interrupts was not specified. Set the supported number of MSI vectors to enable all the MSI_CTRL_INT_i_* registers on the fu740 PCIe core, allowing the system to fully utilize the available MSI interrupts. Link: https://lore.kernel.org/r/20230807055621.2431-1-yongxuan.wang@sifive.com Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset"Bjorn Helgaas
commit 5260bd6d36c83c5b269c33baaaf8c78e520908b0 upstream. This reverts commit d5af729dc2071273f14cbb94abbc60608142fd83. d5af729dc207 ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided Secondary Bus Reset on the T4 because the reset seemed to not work when the T4 was directly attached to a Root Port. But NVIDIA thinks the issue is probably related to some issue with the Root Port, not with the T4. The T4 provides neither PM nor FLR reset, so masking bus reset compromises this device for assignment scenarios. Revert d5af729dc207 as requested by Wu Zongyong. This will leave SBR broken in the specific configuration Wu tested, as it was in v6.5, so Wu will debug that further. Link: https://lore.kernel.org/r/ZPqMCDWvITlOLHgJ@wuzongyong-alibaba Link: https://lore.kernel.org/r/20230908201104.GA305023@bhelgaas Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-19PCI: rockchip: Use 64-bit mask on MSI 64-bit PCI addressRick Wertenbroek
commit cdb50033dd6dfcf02ae3d4ee56bc1a9555be6d36 upstream. A 32-bit mask was used on the 64-bit PCI address used for mapping MSIs. This would result in the upper 32 bits being unintentionally zeroed and MSIs getting mapped to incorrect PCI addresses if the address had any of the upper bits set. Replace 32-bit mask by appropriate 64-bit mask. [kwilczynski: use GENMASK_ULL() over GENMASK() for 32-bit compatibility] Fixes: dc73ed0f1b8b ("PCI: rockchip: Fix window mapping and address translation for endpoint") Closes: https://lore.kernel.org/linux-pci/8d19e5b7-8fa0-44a4-90e2-9bb06f5eb694@moroto.mountain Link: https://lore.kernel.org/linux-pci/20230703085845.2052008-1-rick.wertenbroek@gmail.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-19PCI: layerscape: Add workaround for lost link capabilities during resetXiaowei Bao
[ Upstream commit 17cf8661ee0f065c08152e611a568dd1fb0285f1 ] The endpoint controller loses the Maximum Link Width and Supported Link Speed value from the Link Capabilities Register - initially configured by the Reset Configuration Word (RCW) - during a link-down or hot reset event. Address this issue in the endpoint event handler. Link: https://lore.kernel.org/r/20230720135834.1977616-2-Frank.Li@nxp.com Fixes: a805770d8a22 ("PCI: layerscape: Add EP mode support") Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Acked-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19PCI: layerscape: Add the endpoint linkup notifier supportFrank Li
[ Upstream commit 061cbfab09fb35898f2907d42f936cf9ae271d93 ] Layerscape has PME interrupt, which can be used as linkup notifier. Set CFG_READY bit of PEX_PF0_CONFIG to enable accesses from root complex when linkup detected. Link: https://lore.kernel.org/r/20230515151049.2797105-1-Frank.Li@nxp.com Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Stable-dep-of: 17cf8661ee0f ("PCI: layerscape: Add workaround for lost link capabilities during reset") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19PCI: dwc: Add start_link/stop_link inlinesSerge Semin
[ Upstream commit a37beefbde8802a4eab2545fee1b1780a03f2aa0 ] Factor out this pattern: if (!pci->ops || !pci->ops->start_link) return -EINVAL; return pci->ops->start_link(pci); into a new dw_pcie_start_link() wrapper and do the same for the stop_link() method. Note that dw_pcie_ep_start() previously returned -EINVAL if there was no platform start_link() method, which didn't make much sense since that is not an error. It will now return 0 in that case. As a side-effect, drop the empty start_link() and dummy dw_pcie_ops instances from the generic DW PCIe and Layerscape EP platform drivers. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-14-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Stable-dep-of: 17cf8661ee0f ("PCI: layerscape: Add workaround for lost link capabilities during reset") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19PCI/ASPM: Use RMW accessors for changing LNKCTLIlpo Järvinen
[ Upstream commit e09060b3b6b4661278ff8e1b7b81a37d5ea86eae ] Don't assume that the device is fully under the control of ASPM and use RMW capability accessors which do proper locking to avoid losing concurrent updates to the register values. If configuration fails in pcie_aspm_configure_common_clock(), the function attempts to restore the old PCI_EXP_LNKCTL_CCC settings. Store only the old PCI_EXP_LNKCTL_CCC bit for the relevant devices rather than the content of the whole LNKCTL registers. It aligns better with how pcie_lnkctl_clear_and_set() expects its parameter and makes the code more obvious to understand. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: 2a42d9dba784 ("PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch") Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Link: https://lore.kernel.org/r/20230717120503.15276-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19PCI: pciehp: Use RMW accessors for changing LNKCTLIlpo Järvinen
[ Upstream commit 5f75f96c61039151c193775d776fde42477eace1 ] As hotplug is not the only driver touching LNKCTL, use the RMW capability accessor which handles concurrent changes correctly. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: 7f822999e12a ("PCI: pciehp: Add Disable/enable link functions") Link: https://lore.kernel.org/r/20230717120503.15276-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19PCI: Mark NVIDIA T4 GPUs to avoid bus resetWu Zongyong
[ Upstream commit d5af729dc2071273f14cbb94abbc60608142fd83 ] NVIDIA T4 GPUs do not work with SBR. This problem is found when the T4 card is direct attached to a Root Port only. Avoid bus reset by marking T4 GPUs PCI_DEV_FLAGS_NO_BUS_RESET. Fixes: 4c207e7121fa ("PCI: Mark some NVIDIA GPUs to avoid bus reset") Link: https://lore.kernel.org/r/2dcebea53a6eb9bd212ec6d8974af2e5e0333ef6.1681129861.git.wuzongyong@linux.alibaba.com Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19PCI: microchip: Correct the DED and SEC interrupt bit offsetsDaire McNamara
[ Upstream commit 6d473a5a26136edf55c435a1c433e52910e03926 ] The SEC and DED interrupt bits are laid out the wrong way round so the SEC interrupt handler attempts to mask, unmask, and clear the DED interrupt and vice versa. Correct the bit offsets so that each interrupt handler operates properly. Link: https://lore.kernel.org/r/20230728131401.1615724-2-daire.mcnamara@microchip.com Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver") Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root busIgor Mammedov
commit cc22522fd55e257c86d340ae9aedc122e705a435 upstream. 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") changed acpiphp hotplug to use pci_assign_unassigned_bridge_resources() which depends on bridge being available, however enable_slot() can be called without bridge associated: 1. Legitimate case of hotplug on root bus (widely used in virt world) 2. A (misbehaving) firmware, that sends ACPI Bus Check notifications to non existing root ports (Dell Inspiron 7352/0W6WV0), which end up at enable_slot(..., bridge = 0) where bus has no bridge assigned to it. acpihp doesn't know that it's a bridge, and bus specific 'PCI subsystem' can't augment ACPI context with bridge information since the PCI device to get this data from is/was not available. Issue is easy to reproduce with QEMU's 'pc' machine, which supports PCI hotplug on hostbridge slots. To reproduce, boot kernel at commit 40613da52b13 in VM started with following CLI (assuming guest root fs is installed on sda1 partition): # qemu-system-x86_64 -M pc -m 1G -enable-kvm -cpu host \ -monitor stdio -serial file:serial.log \ -kernel arch/x86/boot/bzImage \ -append "root=/dev/sda1 console=ttyS0" \ guest_disk.img Once guest OS is fully booted at qemu prompt: (qemu) device_add e1000 (check serial.log) it will cause NULL pointer dereference at: void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) { struct pci_bus *parent = bridge->subordinate; BUG: kernel NULL pointer dereference, address: 0000000000000018 ? pci_assign_unassigned_bridge_resources+0x1f/0x260 enable_slot+0x21f/0x3e0 acpiphp_hotplug_notify+0x13d/0x260 acpi_device_hotplug+0xbc/0x540 acpi_hotplug_work_fn+0x15/0x20 process_one_work+0x1f7/0x370 worker_thread+0x45/0x3b0 The issue was discovered on Dell Inspiron 7352/0W6WV0 laptop with following sequence: 1. Suspend to RAM 2. Wake up with the same backtrace being observed: 3. 2nd suspend to RAM attempt makes laptop freeze Fix it by using __pci_bus_assign_resources() instead of pci_assign_unassigned_bridge_resources() as we used to do, but only in case when bus doesn't have a bridge associated (to cover for the case of ACPI event on hostbridge or non existing root port). That lets us keep hotplug on root bus working like it used to and at the same time keeps resource reassignment usable on root ports (and other 1st level bridges) that was fixed by 40613da52b13. Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") Link: https://lore.kernel.org/r/20230726123518.2361181-2-imammedo@redhat.com Reported-by: Woody Suwalski <terraluna977@gmail.com> Tested-by: Woody Suwalski <terraluna977@gmail.com> Tested-by: Michal Koutný <mkoutny@suse.com> Link: https://lore.kernel.org/r/11fc981c-af49-ce64-6b43-3e282728bd1a@gmail.com Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30PCI: acpiphp: Reassign resources on bridge if necessaryIgor Mammedov
[ Upstream commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 ] When using ACPI PCI hotplug, hotplugging a device with large BARs may fail if bridge windows programmed by firmware are not large enough. Reproducer: $ qemu-kvm -monitor stdio -M q35 -m 4G \ -global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=on \ -device id=rp1,pcie-root-port,bus=pcie.0,chassis=4 \ disk_image wait till linux guest boots, then hotplug device: (qemu) device_add qxl,bus=rp1 hotplug on guest side fails with: pci 0000:01:00.0: [1b36:0100] type 00 class 0x038000 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x03ffffff] pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x03ffffff] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00001fff] pci 0000:01:00.0: reg 0x1c: [io 0x0000-0x001f] pci 0000:01:00.0: BAR 0: no space for [mem size 0x04000000] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x04000000] pci 0000:01:00.0: BAR 1: no space for [mem size 0x04000000] pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x04000000] pci 0000:01:00.0: BAR 2: assigned [mem 0xfe800000-0xfe801fff] pci 0000:01:00.0: BAR 3: assigned [io 0x1000-0x101f] qxl 0000:01:00.0: enabling device (0000 -> 0003) Unable to create vram_mapping qxl: probe of 0000:01:00.0 failed with error -12 However when using native PCIe hotplug '-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off' it works fine, since kernel attempts to reassign unused resources. Use the same machinery as native PCIe hotplug to (re)assign resources. Link: https://lore.kernel.org/r/20230424191557.2464760-1-imammedo@redhat.com Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-26PCI: tegra194: Fix possible array out of bounds accessSumit Gupta
[ Upstream commit 205b3d02d57ce6dce96f6d2b9c230f56a9bf9817 ] Add check to fix the possible array out of bounds violation by making speed equal to GEN1_CORE_CLK_FREQ when its value is more than the size of "pcie_gen_freq" array. This array has size of four but possible speed (CLS) values are from "0 to 0xF". So, "speed - 1" values are "-1 to 0xE". Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Link: https://lore.kernel.org/lkml/72b9168b-d4d6-4312-32ea-69358df2f2d0@nvidia.com/ Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03PCI: rockchip: Don't advertise MSI-X in PCIe capabilitiesRick Wertenbroek
[ Upstream commit a52587e0bee14cbeeadf48a24013828cb04b8df8 ] The RK3399 PCIe endpoint controller cannot generate MSI-X IRQs. This is documented in the RK3399 technical reference manual (TRM) section 17.5.9 "Interrupt Support". MSI-X capability should therefore not be advertised. Remove the MSI-X capability by editing the capability linked-list. The previous entry is the MSI capability, therefore get the next entry from the MSI-X capability entry and set it as next entry for the MSI capability. This in effect removes MSI-X from the list. Linked list before : MSI cap -> MSI-X cap -> PCIe Device cap -> ... Linked list now : MSI cap -> PCIe Device cap -> ... Link: https://lore.kernel.org/r/20230418074700.1083505-11-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03PCI: rockchip: Fix window mapping and address translation for endpointRick Wertenbroek
[ Upstream commit dc73ed0f1b8bddd7f2bf70d123e68ffc99ad71ce ] The RK3399 PCI endpoint core has 33 windows for PCIe space, now in the driver up to 32 fixed size (1M) windows are used and pages are allocated and mapped accordingly. The driver first used a single window and allocated space inside which caused translation issues (between CPU space and PCI space) because a window can only have a single translation at a given time, which if multiple pages are allocated inside will cause conflicts. Now each window is a single region of 1M which will always guarantee that the translation is not in conflict. Set the translation register addresses for physical function. As documented in the technical reference manual (TRM) section 17.5.5 "PCIe Address Translation" and section 17.6.8 "Address Translation Registers Description" Link: https://lore.kernel.org/r/20230418074700.1083505-9-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03PCI: rockchip: Remove writes to unused registersRick Wertenbroek
[ Upstream commit 92a9c57c325dd51682d428ba960d961fec3c8a08 ] Remove write accesses to registers that are marked "unused" (and therefore read-only) in the technical reference manual (TRM) (see RK3399 TRM 17.6.8.1) Link: https://lore.kernel.org/r/20230418074700.1083505-2-rick.wertenbroek@gmail.com Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Stable-dep-of: dc73ed0f1b8b ("PCI: rockchip: Fix window mapping and address translation for endpoint") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03PCI/ASPM: Avoid link retraining raceIlpo Järvinen
[ Upstream commit e7e39756363ad5bd83ddeae1063193d0f13870fd ] PCIe r6.0.1, sec 7.5.3.7, recommends setting the link control parameters, then waiting for the Link Training bit to be clear before setting the Retrain Link bit. This avoids a race where the LTSSM may not use the updated parameters if it is already in the midst of link training because of other normal link activity. Wait for the Link Training bit to be clear before toggling the Retrain Link bit to ensure that the LTSSM uses the updated link control parameters. [bhelgaas: commit log, return 0 (success)/-ETIMEDOUT instead of bool for both pcie_wait_for_retrain() and the existing pcie_retrain_link()] Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Link: https://lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03PCI/ASPM: Factor out pcie_wait_for_retrain()Ilpo Järvinen
[ Upstream commit 9c7f136433d26592cb4d9cd00b4e15c33d9797c6 ] Factor pcie_wait_for_retrain() out from pcie_retrain_link(). No functional change intended. [bhelgaas: split out from https: //lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com] Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Stable-dep-of: e7e39756363a ("PCI/ASPM: Avoid link retraining race") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03PCI/ASPM: Return 0 or -ETIMEDOUT from pcie_retrain_link()Bjorn Helgaas
[ Upstream commit f5297a01ee805d7fa569d288ed65fc0f9ac9b03d ] "pcie_retrain_link" is not a question with a true/false answer, so "bool" isn't quite the right return type. Return 0 for success or -ETIMEDOUT if the retrain failed. No functional change intended. [bhelgaas: based on Ilpo's patch below] Link: https://lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Stable-dep-of: e7e39756363a ("PCI/ASPM: Avoid link retraining race") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23PCI: rockchip: Set address alignment for endpoint modeDamien Le Moal
commit 7e6689b34a815bd379dfdbe9855d36f395ef056c upstream. The address translation unit of the rockchip EP controller does not use the lower 8 bits of a PCIe-space address to map local memory. Thus we must set the align feature field to 256 to let the user know about this constraint. Link: https://lore.kernel.org/r/20230418074700.1083505-12-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Use u32 variable to access 32-bit registersRick Wertenbroek
commit 8962b2cb39119cbda4fc69a1f83957824f102f81 upstream. Previously u16 variables were used to access 32-bit registers, this resulted in not all of the data being read from the registers. Also the left shift of more than 16-bits would result in moving data out of the variable. Use u32 variables to access 32-bit registers Link: https://lore.kernel.org/r/20230418074700.1083505-10-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Fix legacy IRQ generation for RK3399 PCIe endpoint coreRick Wertenbroek
commit 166e89d99dd85a856343cca51eee781b793801f2 upstream. Fix legacy IRQ generation for RK3399 PCIe endpoint core according to the technical reference manual (TRM). Assert and deassert legacy interrupt (INTx) through the legacy interrupt control register ("PCIE_CLIENT_LEGACY_INT_CTRL") instead of manually generating a PCIe message. The generation of the legacy interrupt was tested and validated with the PCIe endpoint test driver. Link: https://lore.kernel.org/r/20230418074700.1083505-8-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be lockedRick Wertenbroek
commit 9dd3c7c4c8c3f7f010d9cdb7c3f42506d93c9527 upstream. The RK3399 PCIe controller should wait until the PHY PLLs are locked. Add poll and timeout to wait for PHY PLLs to be locked. If they cannot be locked generate error message and jump to error handler. Accessing registers in the PHY clock domain when PLLs are not locked causes hang The PHY PLLs status is checked through a side channel register. This is documented in the TRM section 17.5.8.1 "PCIe Initialization Sequence". Link: https://lore.kernel.org/r/20230418074700.1083505-5-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Write PCI Device ID to correct registerRick Wertenbroek
commit 1f1c42ece18de365c976a060f3c8eb481b038e3a upstream. Write PCI Device ID (DID) to the correct register. The Device ID was not updated through the correct register. Device ID was written to a read-only register and therefore did not work. The Device ID is now set through the correct register. This is documented in the RK3399 TRM section 17.6.6.1.1 Link: https://lore.kernel.org/r/20230418074700.1083505-3-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Assert PCI Configuration Enable bit after probeRick Wertenbroek
commit f397fd4ac1fa3afcabd8cee030f953ccaed2a364 upstream. Assert PCI Configuration Enable bit after probe. When this bit is left to 0 in the endpoint mode, the RK3399 PCIe endpoint core will generate configuration request retry status (CRS) messages back to the root complex. Assert this bit after probe to allow the RK3399 PCIe endpoint core to reply to configuration requests from the root complex. This is documented in section 17.5.8.1.2 of the RK3399 TRM. Link: https://lore.kernel.org/r/20230418074700.1083505-4-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-07-06 11:27:06 +0000