aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/marvell/mwifiex
AgeCommit message (Collapse)Author
2019-12-01mwifiex: Fix NL80211_TX_POWER_LIMITEDAdrian Bunk
[ Upstream commit 65a576e27309120e0621f54d5c81eb9128bd56be ] NL80211_TX_POWER_LIMITED was treated as NL80211_TX_POWER_AUTOMATIC, which is the opposite of what should happen and can cause nasty regulatory problems. if/else converted to a switch without default to make gcc warn on unhandled enum values. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-20mwifex: free rx_cmd skb in suspended stateGanapathi Bhat
[ Upstream commit 33a164fa8a4c91408e0b7738f754cb1a7827c5f2 ] USB suspend handler will kill the presubmitted rx_cmd URB. This triggers a call to the corresponding URB complete handler, which will free the rx_cmd skb, associated with rx_cmd URB. Due to a possible race betwen suspend handler and main thread, depicted in 'commit bfcacac6c84b ("mwifiex: do no submit URB in suspended state")', it is possible that the rx_cmd skb will fail to get freed. This causes a memory leak, since the resume handler will always allocate a new rx_cmd skb. To fix this, free the rx_cmd skb in mwifiex_usb_submit_rx_urb, if the device is in suspended state. Signed-off-by: Vidya Dharmaraju <vidyad@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-20mwifiex: do no submit URB in suspended stateGanapathi Bhat
[ Upstream commit 7bd4628c2f31c51254aa39628ecae521d00d0b90 ] There is a possible race between USB suspend and main thread: 1. After processing the command response, main thread will submit rx_cmd URB back so as to process next command response, by calling mwifiex_usb_submit_rx_urb. 2. During USB suspend, the suspend handler will check if rx_cmd URB is pending(submitted) and if true, kill this URB. There is a possible race between #1 and #2, where rx_cmd URB will be submitted by main thread(#1) after the suspend handler check in #2. To fix this, check if device is already suspended in mwifiex_usb_submit_rx_urb, in which case do not submit the URB. Signed-off-by: Vidya Dharmaraju <vidyad@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-21mwifiex: Fix three heap overflow at parsing element in cfg80211_ap_settingsWen Huang
commit 7caac62ed598a196d6ddf8d9c121e12e082cac3a upstream. mwifiex_update_vs_ie(),mwifiex_set_uap_rates() and mwifiex_set_wmm_params() call memcpy() without checking the destination size.Since the source is given from user-space, this may trigger a heap buffer overflow. Fix them by putting the length check before performing memcpy(). This fix addresses CVE-2019-14814,CVE-2019-14815,CVE-2019-14816. Signed-off-by: Wen Huang <huangwenabc@gmail.com> Acked-by: Ganapathi Bhat <gbhat@marvell.comg> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16mwifiex: fix 802.11n/WPA detectionBrian Norris
commit df612421fe2566654047769c6852ffae1a31df16 upstream. Commit 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant vendor IEs") adjusted the ieee_types_vendor_header struct, which inadvertently messed up the offsets used in mwifiex_is_wpa_oui_present(). Add that offset back in, mirroring mwifiex_is_rsn_oui_present(). As it stands, commit 63d7ef36103d breaks compatibility with WPA (not WPA2) 802.11n networks, since we hit the "info: Disable 11n if AES is not supported by AP" case in mwifiex_is_network_compatible(). Fixes: 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant vendor IEs") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14mwifiex: Don't abort on small, spec-compliant vendor IEsBrian Norris
commit 63d7ef36103d26f20325a921ecc96a3288560146 upstream. Per the 802.11 specification, vendor IEs are (at minimum) only required to contain an OUI. A type field is also included in ieee80211.h (struct ieee80211_vendor_ie) but doesn't appear in the specification. The remaining fields (subtype, version) are a convention used in WMM headers. Thus, we should not reject vendor-specific IEs that have only the minimum length (3 bytes) -- we should skip over them (since we only want to match longer IEs, that match either WMM or WPA formats). We can reject elements that don't have the minimum-required 3 byte OUI. While we're at it, move the non-standard subtype and version fields into the WMM structs, to avoid this confusion in the future about generic "vendor header" attributes. Fixes: 685c9b7750bf ("mwifiex: Abort at too short BSS descriptor element") Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14mwifiex: Abort at too short BSS descriptor elementTakashi Iwai
commit 685c9b7750bfacd6fc1db50d86579980593b7869 upstream. Currently mwifiex_update_bss_desc_with_ie() implicitly assumes that the source descriptor entries contain the enough size for each type and performs copying without checking the source size. This may lead to read over boundary. Fix this by putting the source size check in appropriate places. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies()Takashi Iwai
[ Upstream commit 69ae4f6aac1578575126319d3f55550e7e440449 ] A few places in mwifiex_uap_parse_tail_ies() perform memcpy() unconditionally, which may lead to either buffer overflow or read over boundary. This patch addresses the issues by checking the read size and the destination size at each place more properly. Along with the fixes, the patch cleans up the code slightly by introducing a temporary variable for the token size, and unifies the error path with the standard goto statement. Reported-by: huangwen <huangwen@venustech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-14mwifiex: Fix possible buffer overflows at parsing bss descriptorTakashi Iwai
[ Upstream commit 13ec7f10b87f5fc04c4ccbd491c94c7980236a74 ] mwifiex_update_bss_desc_with_ie() calls memcpy() unconditionally in a couple places without checking the destination size. Since the source is given from user-space, this may trigger a heap buffer overflow. Fix it by putting the length check before performing memcpy(). This fix addresses CVE-2019-3846. Reported-by: huangwen <huangwen@venustech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31mwifiex: Fix mem leak in mwifiex_tm_cmdYueHaibing
[ Upstream commit 003b686ace820ce2d635a83f10f2d7f9c147dabc ] 'hostcmd' is alloced by kzalloc, should be freed before leaving from the error handling cases, otherwise it will cause mem leak. Fixes: 3935ccc14d2c ("mwifiex: add cfg80211 testmode support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31mwifiex: prevent an array overflowDan Carpenter
[ Upstream commit b4c35c17227fe437ded17ce683a6927845f8c4a4 ] The "rate_index" is only used as an index into the phist_data->rx_rate[] array in the mwifiex_hist_data_set() function. That array has MWIFIEX_MAX_AC_RX_RATES (74) elements and it's used to generate some debugfs information. The "rate_index" variable comes from the network skb->data[] and it is a u8 so it's in the 0-255 range. We need to cap it to prevent an array overflow. Fixes: cbf6e05527a7 ("mwifiex: add rx histogram statistics support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-08mwifiex: Make resume actually do something useful again on SDIO cardsDouglas Anderson
commit b82d6c1f8f8288f744a9dcc16cd3085d535decca upstream. The commit fc3a2fcaa1ba ("mwifiex: use atomic bitops to represent adapter status variables") had a fairly straightforward bug in it. It contained this bit of diff: - if (!adapter->is_suspended) { + if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) { As you can see the patch missed the "!" when converting to the atomic bitops. This meant that the resume hasn't done anything at all since that commit landed and suspend/resume for mwifiex SDIO cards has been totally broken. After fixing this mwifiex suspend/resume appears to work again, at least with the simple testing I've done. Fixes: fc3a2fcaa1ba ("mwifiex: use atomic bitops to represent adapter status variables") Cc: <stable@vger.kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-05mwifiex: don't advertise IBSS features without FW supportBrian Norris
[ Upstream commit 6f21ab30469d670de620f758330aca9f3433f693 ] As it is, doing something like # iw phy phy0 interface add foobar type ibss on a firmware that doesn't have ad-hoc support just yields failures of HostCmd_CMD_SET_BSS_MODE, which happened to return a '-1' error code (-EPERM? not really right...) and sometimes may even crash the firmware along the way. Let's parse the firmware capability flag while registering the wiphy, so we don't allow attempting IBSS at all, and we get a proper -EOPNOTSUPP from nl80211 instead. Fixes: e267e71e68ae ("mwifiex: Disable adhoc feature based on firmware capability") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-29Revert "mwifiex: restructure rx_reorder_tbl_lock usage"Brian Norris
commit 1aa48f088615ebfa5e139951a0d3e7dc2c2af4ec upstream. This reverts commit 5188d5453bc9380ccd4ae1086138dd485d13aef2, because it introduced lock recursion: BUG: spinlock recursion on CPU#2, kworker/u13:1/395 lock: 0xffffffc0e28a47f0, .magic: dead4ead, .owner: kworker/u13:1/395, .owner_cpu: 2 CPU: 2 PID: 395 Comm: kworker/u13:1 Not tainted 4.20.0-rc4+ #2 Hardware name: Google Kevin (DT) Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex] Call trace: dump_backtrace+0x0/0x140 show_stack+0x20/0x28 dump_stack+0x84/0xa4 spin_bug+0x98/0xa4 do_raw_spin_lock+0x5c/0xdc _raw_spin_lock_irqsave+0x38/0x48 mwifiex_flush_data+0x2c/0xa4 [mwifiex] call_timer_fn+0xcc/0x1c4 run_timer_softirq+0x264/0x4f0 __do_softirq+0x1a8/0x35c do_softirq+0x54/0x64 netif_rx_ni+0xe8/0x120 mwifiex_recv_packet+0xfc/0x10c [mwifiex] mwifiex_process_rx_packet+0x1d4/0x238 [mwifiex] mwifiex_11n_dispatch_pkt+0x190/0x1ac [mwifiex] mwifiex_11n_rx_reorder_pkt+0x28c/0x354 [mwifiex] mwifiex_process_sta_rx_packet+0x204/0x26c [mwifiex] mwifiex_handle_rx_packet+0x15c/0x16c [mwifiex] mwifiex_rx_work_queue+0x104/0x134 [mwifiex] worker_thread+0x4cc/0x72c kthread+0x134/0x13c ret_from_fork+0x10/0x18 This was clearly not tested well at all. I simply performed 'wget' in a loop and it fell over within a few seconds. Fixes: 5188d5453bc9 ("mwifiex: restructure rx_reorder_tbl_lock usage") Cc: <stable@vger.kernel.org> Cc: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-31mwifiex: Fix skipped vendor specific IEsRoman Stratiienko
Mwifiex firmware inserts only Microsoft information element Allow other vendor specific IEs to pass from userspace Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31mwifiex: use atomic bitops to represent adapter status variablesGanapathi Bhat
Driver is using boolean variables to maintain vairous status information of adapter. These status variables are accessed by multiple threads and there is a possibility of a race. To avoid this, convert these variables to a set of bitops flags, to be operated atomically. Below variables of mwifiex_adapter are converted to bitop flags: surprise_removed is_cmd_timedout is_suspended is_hs_configured hs_enabling Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31mwifiex: restructure rx_reorder_tbl_lock usageGanapathi Bhat
Driver must ensure that whenever it holds a pointer to the list entry mwifiex_rx_reorder_tbl, it must protect the same with rx_reorder_tbl_lock. At present there are many places where driver does not ensure this. To cover all cases, spinlocks in below funcions are moved out and made sure that the caller will hold the spinlock: mwifiex_11n_dispatch_pkt_until_start_win() mwifiex_11n_scan_and_dispatch() mwifiex_del_rx_reorder_entry() mwifiex_11n_get_rx_reorder_tbl() mwifiex_11n_find_last_seq_num() Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-31mwifiex: replace rx_pkt_lock by rx_reorder_tbl_lockGanapathi Bhat
At present driver spinlock protects iteration of list rx_reorder_tbl_ptr with rx_reorder_tbl_lock. To protect the individual items in this list, it uses rx_pkt_lock. But, we can use a single rx_reorder_tbl_lock for both purposes. This patch replaces rx_pkt_lock by rx_reorder_tbl_lock. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-23Merge tag 'wireless-drivers-next-for-davem-2018-07-23' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.19 The first set of patches for 4.19. Only smaller features and bug fixes, not really anything major. Also included are changes to include/linux/bitfield.h, we agreed with Johannes that it makes sense to apply them via wireless-drivers-next. Major changes: ath10k * support channel 173 * fix spectral scan for QCA9984 and QCA9888 chipsets ath6kl * add support for Dell Wireless 1537 ti wlcore * add support for runtime PM * enable runtime PM autosuspend support qtnfmac * support changing MAC address * enable source MAC address randomization support libertas * fix suspend and resume for SDIO cards mt76 * add software DFS radar pattern detector for mt76x2 based devices ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-09net: allow ndo_select_queue to pass netdevAlexander Duyck
This patch makes it so that instead of passing a void pointer as the accel_priv we instead pass a net_device pointer as sb_dev. Making this change allows us to pass the subordinate device through to the fallback function eventually so that we can keep the actual code in the ndo_select_queue call as focused on possible on the exception cases. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-27wireless-drivers: use BIT_ULL for NL80211_STA_INFO_ attribute typesOmer Efrat
The BIT macro uses unsigned long which some architectures handle as 32 bit and therefore might cause macro's shift to overflow when used on a value equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards). Since 'filled' member in station_info changed to u64, BIT_ULL macro should be used with all NL80211_STA_INFO_* attribute types instead of BIT to prevent future possible bugs when one will use BIT macro for higher attributes by mistake. This commit cleans up all usages of BIT macro with the above field in wireless-drivers by changing it to BIT_ULL instead. In addition, there are some places which don't use BIT nor BIT_ULL macros so align those as well. Signed-off-by: Omer Efrat <omer.efrat@tandemg.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-27mwifiex: uap: do not chok ethernet header in bridge pathXinming Hu
Do not chock ethernet header for uap bridge data path, as it is still needed to send skb to dest station. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-24mwifiex: handle race during mwifiex_usb_disconnectGanapathi Bhat
Race condition is observed during rmmod of mwifiex_usb: 1. The rmmod thread will call mwifiex_usb_disconnect(), download SHUTDOWN command and do wait_event_interruptible_timeout(), waiting for response. 2. The main thread will handle the response and will do a wake_up_interruptible(), unblocking rmmod thread. 3. On getting unblocked, rmmod thread will make rx_cmd.urb = NULL in mwifiex_usb_free(). 4. The main thread will try to resubmit rx_cmd.urb in mwifiex_usb_submit_rx_urb(), which is NULL. To fix this, move mwifiex_usb_free() from mwifiex_usb_disconnect to mwifiex_unregister_dev(). Function mwifiex_unregister_dev() is called after flushing the command and RX work queues. Suggested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-24Revert "mwifiex: handle race during mwifiex_usb_disconnect"Ganapathi Bhat
This reverts commit b817047ae70c0bd67b677b65d0d69d72cd6e9728. We have a better fix for this issue, which will be sent on top of this revert. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-29mwifiex: reserve passive scan time for radar channelXinming Hu
Active scan is not allowed on radar channel, instead using passvie scan with more time. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29mwifiex: increase log level for internal scan fail resultXinming Hu
Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29mwifiex: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29mwifiex: skip sending GT_REKEY_OFFLOAD_CFG if firmware has no supportGanapathi Bhat
If firmware does not support embedded supplicant, then it in turn will not support GT rekey offloading. If this is the case, then driver must not advertise WOWLAN flags related to GTK rekey and it must also skip sending the GT_REKEY_OFFLOAD_CFG command. Signed-off-by: Shrenik Shikhare <shrenik@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29mwifiex: handle race during mwifiex_usb_disconnectGanapathi Bhat
Race condition is observed during rmmod of mwifiex_usb: 1. The rmmod thread will call mwifiex_usb_disconnect(), download SHUTDOWN command and do wait_event_interruptible_timeout(), waiting for response. 2. The main thread will handle the response and will do a wake_up_interruptible(), unblocking rmmod thread. 3. On getting unblocked, rmmod thread will make rx_cmd.urb = NULL in mwifiex_usb_free(). 4. The main thread will try to resubmit rx_cmd.urb in mwifiex_usb_submit_rx_urb(), which is NULL. To fix, wait for main thread to complete before calling mwifiex_usb_free(). Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29mwifiex: avoid exporting mwifiex_send_cmdGanapathi Bhat
This is a follow-up patch for commit 21c5c83ce833 ("mwifiex: support sysfs initiated device coredump"). Let us avoid exporting mwifiex_send_cmd and instead use a utility function mwifiex_fw_dump_event to achive the work. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mwifiex: support sysfs initiated device coredumpArend Van Spriel
Since commit 3c47d19ff4dc ("drivers: base: add coredump driver ops") it is possible to initiate a device coredump from user-space. This patch adds support for it adding the .coredump() driver callback. As there is no longer a need to initiate it through debugfs remove that code. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mwifiex: correct histogram data with appropriate indexXinming Hu
Correct snr/nr/rssi data index to avoid possible buffer underflow. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wireless-drivers: Dynamically allocate struct station_infoToke Høiland-Jørgensen
Since the addition of the TXQ stats to cfg80211, the station_info struct has grown to be quite large, which results in warnings when allocated on the stack. Fix the affected places to do dynamic allocations instead. Fixes: 52539ca89f36 ("cfg80211: Expose TXQ stats and parameters to userspace") Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-09mwifiex: increase TX threashold to avoid TX timeout during ED MAC testGanapathi Bhat
While carrying energy detection(ED) tests, the chip will stop transmission upon detecting an energy in the connected channel. As a feedback, driver will stop dequeuing TX packets and due to which wmm_tx_pending keep incremeting. Once wmm_tx_pending reaches 100, driver calls netif_tx_stop_queue(). If TX ques is not restarted within 5(watchdog_timeo) seconds, it will result in TX timeout. The ED test is carried out for one minute and the current threshold of 100 is easily overcome by the traffic, cuasing TX timeouts. To fix this increase the threshold to 400. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-09mwifiex: delete unneeded includeJulia Lawall
Nothing that is defined in 11ac.h is referenced in cmdevt.c. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mwifiex: keep user configured mac address during changing virtual interfaceXinming Hu
During changing virtual interface, keep using previous net device mac address. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mwifiex: always configure firmware mac address during changing virtual interfaceXinming Hu
When interface type changed, firmware using a new connction pointer. We need Re-configure the mac address. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mwifiex: make firmware mac address consistent with host configurationXinming Hu
For user configurated mac address, directly set to firmware with no change. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mwifiex: fix mwifiex_hard_start_xmit()'s return typeLuc Van Oostenryck
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-25mwifiex: pcie: tighten a check in mwifiex_pcie_process_event_ready()Dan Carpenter
If "evt_len" is 1 then we try to memcpy() negative 3 bytes and it would cause memory corruption. Fixes: d930faee141b ("mwifiex: add support for Marvell pcie8766 chipset") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-25mwifiex: uap: support cfg80211 ignore_broadcast_ssid=2Xinming Hu
Firmware already support hidden ssid and keep ssid length, Open the capability in driver. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-25mwifiex: uap: filter duplicate ERP IEXinming Hu
Firmware parse and attach ERP IE from bss configuration, do not set again from tail IE. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27mwifiex: remove warnings in mwifiex_cmd_append_11n_tlv()Ganapathi Bhat
Fix the following sparse warning in mwifiex_cmd_append_11n_tlv: drivers/net/wireless/marvell/mwifiex/11n.c:358:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:358:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:358:65: right side has type int drivers/net/wireless/marvell/mwifiex/11n.c:360:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:360:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:360:65: right side has type int drivers/net/wireless/marvell/mwifiex/11n.c:366:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:366:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:366:65: right side has type int drivers/net/wireless/marvell/mwifiex/11n.c:368:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:368:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:368:65: right side has type int Fixes: 77423fa73927 ("mwifiex: fix incorrect ht capability problem") Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13mwifiex: get_channel from firmwareGanapathi Bhat
At present driver gets chan_type by referring to IEEE80211_HT_PARAM_CHA_SEC_OFFSET, in ASSOC response. Sometimes AP shows IEEE80211_HT_PARAM_CHA_SEC_OFFSET as above/below in assoc response, even if the association is done on HT20 channel only. So, it will be accurate to get econdary channel offset from firmware. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13mwifiex: fix incorrect ht capability problemGanapathi Bhat
IEEE80211_CHAN_NO_HT40PLUS and IEEE80211_CHAN_NO_HT40PLUS channel flags tell if HT40 operation is allowed on a channel or not. This patch ensures ht_capability information is modified accordingly so that we don't end up creating a HT40 connection when it's not allowed for current regulatory domain. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13Revert "mwifiex: fix incorrect ht capability problem"Ganapathi Bhat
This reverts commit bcc920e8f08336cbbdcdba7c4449c27137e6b4b9. Drivers gets hardware info and updates ht_cap field of wiphy->bands during initialization. Once updated during init, ht_cap must not be modified as it reflects the capability supported by hardwawre. Above patch tries to modify the ht_cap field and this results in wrongly advertising capabilities during association. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13mwifiex: correct antenna number with high bits reservedXinming Hu
High bits of antenna number are reserved in hardware spec, using low 4 bits represent supported antenna. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-21 03:05:17 +0000