aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intel
AgeCommit message (Collapse)Author
2019-04-13Merge tag 'iwlwifi-next-for-kalle-2019-04-03' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Second batch of patches intended for v5.2 * Work on the new debugging infra continues; * Fixes for the 22000 series; * Support for some new FW API changes; * Work on new hardware continues; * Some debugfs cleanups by Greg-KH; * General bugfixes; * Other cleanups;
2019-04-08drivers: Remove explicit invocations of mmiowb()Will Deacon
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-04iwlegacy: remove redundant assignment to *resColin Ian King
Currently 1 is being assigned to *res and then it is immediately updated with the computed result. The first assignment is redundant and can be removed. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-03iwlwifi: remove misconfigured pci ids from 22260 seriesIhab Zhaika
Two of the PCI ID entries for the 22260 series were incorrectly using the subsystem vendor ID (which we ignore) as the PCI device ID. This is obviously wrong and can be simply removed since we already have the correct entries in the list. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: mvm: support HE context cmd API changeSara Sharon
Support API change to pass all mbssid parameters to the firmware. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: set 512 TX queue slots for AX210 devicesShaul Triebitz
AX210 devices support 256 BA (256 MPDUs in an AMPDU). The firmware requires that the number of TFDs will be minimum twice as big as the BA size (2 * 256 = 512). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: mvm: use correct GP2 register address for 22000 familyAvraham Stern
The device time register address has changed for 22000 devices. Add a util function for getting the GP2 time and use the correct register address depending on the device family. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg: fill radio registers data regardless of fifos data dumpingShahar S Matityahu
The driver calculates memory regions dump size, allocate memory and fills the data. The driver fills the radio registers data only if the memory size of the fifos is greater then zero, so in case the user masked out the fifos from the dump, the driver will skip filling the radio register data. Solve this by checking filling radio registers data independently from fifos data. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: pcie: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Intel Linux Wireless <linuxwifi@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: mvm: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Intel Linux Wireless <linuxwifi@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: mvm: remove buggy and unnecessary hw_queue initializationJohannes Berg
After converting the driver to TXQs, it no longer has any reason to initialize vif->hw_queue/vif->cab_queue since it no longer sets the HW_QUEUE_CONTROL flag. Remove the code that initialized those, it was broken due to relying on an uninitialized stack value in used_hw_queues, as Colin reported. Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: apply rx fifo offset after reading the region registersShahar S Matityahu
The region registers comes in abolute value so read the registers before applying the rx fifo offset. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: remove redundant type argument from iwl_dump_ini_memShahar S Matityahu
Since iwl_dump_ini_mem receive struct iwl_fw_ini_region_cfg which holds the region type, there is no point to pass the type separately. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: remove redundant curly brackets from trigger collection flowShahar S Matityahu
remove redundant curly brackets from iwl_fw_ini_dump_trigger and iwl_fw_ini_get_trigger_len Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: mvm: fix pointer reference when setting HE QAM thresLiad Kaufman
Pointer referencing when setting HE QAM thresholds (when nominal packet padding bit is on) caused kernel crash due to bad referencing. Fix that. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: add monitor header to smem monitorShahar S Matityahu
Add write pointer and cycle count registers to smem monitor header. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: fix the dram monitor header sizeShahar S Matityahu
Add sizeof(struct iwl_fw_ini_error_dump_range) to the header of the dram monitor. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: change memory range base address to u64Shahar S Matityahu
AX210 devices will use u64 for the base address to the DRAM monitor buffer. To support this, change the structure for all device families so both address sizes fit. Also move range_data_size to the top of the struct to ease the parsing of the memory range. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: mvm: IBSS: use BE FIFO for multicastJohannes Berg
Back in commit 4d339989acd7 ("iwlwifi: mvm: support ibss in dqa mode") we changed queue selection for IBSS to be: if (ieee80211_is_probe_resp(fc) || ieee80211_is_auth(fc) || ieee80211_is_deauth(fc)) return IWL_MVM_DQA_AP_PROBE_RESP_QUEUE; if (info->hw_queue == info->control.vif->cab_queue) return info->hw_queue; return IWL_MVM_DQA_AP_PROBE_RESP_QUEUE; Clearly, the thought at the time must've been that mac80211 will select the hw_queue as the cab_queue, so that we'll return and use that, where we store the multicast queue for IBSS. This, however, isn't true because mac80211 doesn't implement powersave for IBSS and thus selects the normal IBSS interface AC queue (best effort). This therefore always used the probe response queue, which maps to the BE FIFO. In commit cfbc6c4c5b91 ("iwlwifi: mvm: support mac80211 TXQs model") we rethought this code, and as a consequence now started mapping the multicast traffic to the multicast hardware queue since we no longer relied on mac80211 selecting the queue, doing it ourselves instead. This queue is mapped to the MCAST FIFO. however, this isn't actually enabled/controlled by the firmware in IBSS mode because we don't implement powersave, and frames from this queue can never go out in this case. Therefore, we got queue hang reports such as https://bugzilla.kernel.org/show_bug.cgi?id=201707 Fix this by mapping the multicast queue to the BE FIFO in IBSS so that all the frames can go out. Fixes: cfbc6c4c5b91 ("iwlwifi: mvm: support mac80211 TXQs model") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: add registers addresses in fifo dumpShahar S Matityahu
Add to the fifo dump the registers addresses. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: trust calling functionShaul Triebitz
When initializing or overriding HE band capabilities, no need to check the band validity. Trust the calling function to use a valid band. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: add region id to the region dumpShahar S Matityahu
Add the region id of the collected memory to the header of the memory region. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: add version to dump headerShahar S Matityahu
Add version to dump header to allow future changes of the dump struct, once the ini debug flow becomes operational, without breaking backwards compatibility. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: add memory offset to the base address of a memory regionShahar S Matityahu
Add the offset to the base address of a memory region to show the actual addresses being read. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: fix iwl_dump_ini_dev_mem_iter memory base addressShahar S Matityahu
The driver is using range->start_addr before assigning it a value. Set value into range->start_addr and then use it. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: enforce always on domain checkingShahar S Matityahu
Enforce domain checking before sending host commands and collecting memory regions. Currently the driver supports always on domain only. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: support HW error triggerShahar S Matityahu
Differentiate between SW and HW error interrupts and support ini HW error trigger. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: add support for quz firmwaresLuca Coelho
Add a new configuration with a new firmware name for quz devices. And, since these devices have the same PCI device and subsystem IDs, we need to add some code to switch from a normal qu firmware to the quz firmware. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: mvm: update offloaded rate control on changesJohannes Berg
With offloaded rate control, if the station parameters (rates, NSS, bandwidth) change (sta_rc_update method), call iwl_mvm_rs_rate_init() to propagate those change to the firmware. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: mvm: avoid possible deadlock in TX pathJohannes Berg
iwl_mvm_tx_mpdu() may run from iwl_mvm_add_new_dqa_stream_wk(), where soft-IRQs aren't disabled. In this case, it may hold the station lock and be interrupted by a soft-IRQ that also wants to acquire said lock, leading to a deadlock. Fix it by disabling soft-IRQs in iwl_mvm_add_new_dqa_stream_wk(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-30Merge tag 'iwlwifi-next-for-kalle-2019-03-22' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next First batch of patches intended for v5.2 * Send NO_DATA events so they can be captured in radiotap; * Some channel-switch changes; * Support for multiple BSSID; * Continued work and bugfixes for the new debugging infra; * Support for some new FW API versions; * Some work to support new hardware; * General bugfixes; * Other cleanups;
2019-03-22iwlwifi: dbg_ini: align to FW api version 1Shahar S Matityahu
align to ini debug struct version 1 and enforce version checking. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: remove unnecessary goto out in iwl_parse_nvm_mcc_info()Luca Coelho
This goto out was unnecessary because the out label was immediately below it. Remove it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: Use struct_size() in kzallocYueHaibing
Use struct_size() in kzalloc instead of the 'regd_to_copy' Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: dbg_ini: separate between ini and legacy dump flowsShahar S Matityahu
Separate between ini and legacy dump flows to allow adding ini triggers that are not supported in the legacy flow and to increase readabilty. iwl_fw_dbg_ini_collect function is now called with legacy trigger id and _iwl_fw_dbg_ini_collect is called with ini trigger id. Also make the actual dumping function static so that any dump collection will go through iwl_fw_dbg_collect_sync. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: dbg: add DRAM monitor support for AX210 device familyShahar S Matityahu
Allows to perform monitor dumping on AX210 device family Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: set max amsdu for TLC offloadMordechay Goodstein
mac80211 sets max amsdu to min supported ht vs vht but TLC only works with one mode so we can set to the exact mode used (vht/ht) and enable larger amsdu sizes for vht. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: for AX210 device support radio GF4Shaul Triebitz
Add support for radio gf4 (CDB radio). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: pcie: switch to correct RBD/CD layout for 22560Johannes Berg
The layout of the RBD (receive buffer descriptor) isn't quite right, the hardware ended up being implemented differently. Switch to the correct RBD layout. While at it, remove the now useless extra defines. Also, switch the CD (completion descriptor) to the right format, which is basically just a code cleanup because the only field we really used (rbid) is still in the same place. We may need fragmentation later if we ever want to use it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: use dump worker during restart instead of sync dumpShahar S Matityahu
In restart flow, the driver requests HW restart from mac80211 and then mac80211 uses a worker to do the restart flow. In that flow a sync dump is performed. Instead, schedule the dump worker before requesting HW restart from mac80211. This approach simplifies the restart flow. Also, it is neeeded in order to differentiate between the handling of SW and HW errors in a future commit. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: dbg: use dump mask for tx command dumping lengthShahar S Matityahu
Only add the size of the tx command to the dump file size if it is set in the dump_mask. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: Support new format of SCAN_OFFLOAD_PROFILES_QUERY_RSPIlan Peer
Newer FWs use a new format of the SCAN_OFFLOAD_PROFILES_QUERY_RSP, which now supports indicating match on an higher number of channels. Modify the code to support both the old format and the newer one, based on a FW TLV. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: support new NVM response APIShaul Triebitz
Support REGULATORY_NVM_GET_INFO_RSP_API_S_VER_4. This API adds the new 6-7GHz channels. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: add support for 6-7 GHz channelsShaul Triebitz
Add UHB (ultra high band) channels and use 16 bit variables to fit the new channels. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: be more forgiving if num of channels is too bigShaul Triebitz
If number of channels in the driver is greater than number of scan channels given by firmware TLV, do not fail scan config, but adjust to firmware's number of channels. This is helpful for supporting in driver new channels before it being supported by firmware scan. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: enable HT/VHT IBSSJohannes Berg
For some reason we never enabled it, but it appears to work fine. Enable it now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: support multiple BSSIDSara Sharon
Set the capabilities flags and inform firmware Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: track changes in beacon count during channel switchSara Sharon
There are some buggy APs that keeps changing the count while forcing us to block TX. This eventually results in queue hang, assert, and disconnection. Detect such APs and disconnect gracefully in advance. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: disconnect in case of bad channel switch parametersSara Sharon
In case we receive channel switch announcement with immediate quiet and unknown switching time, we will switch when FW identifies AP left channel. However, if AP remains on channel, we will eventually get TX queue hang. Init a work to disconnect if switch doesn't occur within 1500 milliseconds. Do it also for a too long channel switch. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: notify FW on quiet mode in CSASara Sharon
Let FW know if quiet mode is on or not. This is needed in order to disable it in FW when CSA is complete. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-07-03 21:35:34 +0000