aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/intel/iwlwifi/mvm
AgeCommit message (Collapse)Author
2023-11-28wifi: iwlwifi: Use FW rate for non-data framesMiri Korenblit
[ Upstream commit 499d02790495958506a64f37ceda7e97345a50a8 ] Currently we are setting the rate in the tx cmd for mgmt frames (e.g. during connection establishment). This was problematic when sending mgmt frames in eSR mode, as we don't know what link this frame will be sent on (This is decided by the FW), so we don't know what is the lowest rate. Fix this by not setting the rate in tx cmd and rely on FW to choose the right one. Set rate only for injected frames with fixed rate, or when no sta is given. Also set for important frames (EAPOL etc.) the High Priority flag. Fixes: 055b22e770dd ("iwlwifi: mvm: Set Tx rate and flags when there is not station") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230913145231.6c7e59620ee0.I6eaed3ccdd6dd62b9e664facc484081fc5275843@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27wifi: iwlwifi: mvm: avoid baid size integer overflowJohannes Berg
[ Upstream commit 1a528ab1da324d078ec60283c34c17848580df24 ] Roee reported various hard-to-debug crashes with pings in EHT aggregation scenarios. Enabling KASAN showed that we access the BAID allocation out of bounds, and looking at the code a bit shows that since the reorder buffer entry (struct iwl_mvm_reorder_buf_entry) is 128 bytes if debug such as lockdep is enabled, then staring from an agg size 512 we overflow the size calculation, and allocate a much smaller structure than we should, causing slab corruption once we initialize this. Fix this by simply using u32 instead of u16. Reported-by: Roee Goldfiner <roee.h.goldfiner@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.f428c856030d.I2c2bb808e945adb71bc15f5b2bac2d8957ea90eb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27wifi: iwlwifi: pull from TXQs with softirqs disabledJohannes Berg
[ Upstream commit 96fb6f47db24a712d650b0a9b9074873f273fb0e ] In mac80211, it's required that we pull from TXQs by calling ieee80211_tx_dequeue() only with softirqs disabled. However, in iwl_mvm_queue_state_change() we're often called with them enabled, e.g. from flush if anything was flushed, triggering a mac80211 warning. Fix that by disabling the softirqs across the TX call. Fixes: cfbc6c4c5b91 ("iwlwifi: mvm: support mac80211 TXQs model") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.0feef7fa81db.I4dd62542d955b40dd8f0af34fa4accb9d0d17c7e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-30wifi: iwlwifi: mvm: don't trust firmware n_channelsJohannes Berg
[ Upstream commit 682b6dc29d98e857e6ca4bbc077c7dc2899b7473 ] If the firmware sends us a corrupted MCC response with n_channels much larger than the command response can be, we might copy far too much (uninitialized) memory and even crash if the n_channels is large enough to make it run out of the one page allocated for the FW response. Fix that by checking the lengths. Doing a < comparison would be sufficient, but the firmware should be doing it correctly, so check more strictly. Fixes: dcaf9f5ecb6f ("iwlwifi: mvm: add MCC update FW API") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.d7b233139eb4.I51fd319df8e9d41881fc8450e83d78049518a79a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17wifi: iwlwifi: mvm: check firmware response sizeJohannes Berg
[ Upstream commit 13513cec93ac9902d0b896976d8bab3758a9881c ] Check the firmware response size for responses to the memory read/write command in debugfs before using it. Fixes: 2b55f43f8e47 ("iwlwifi: mvm: Add mem debugfs entry") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230417113648.0d56fcaf68ee.I70e9571f3ed7263929b04f8fabad23c9b999e4ea@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18wifi: iwlwifi: mvm: fix double free on tx path.Ben Greear
[ Upstream commit 0473cbae2137b963bd0eaa74336131cb1d3bc6c3 ] We see kernel crashes and lockups and KASAN errors related to ax210 firmware crashes. One of the KASAN dumps pointed at the tx path, and it appears there is indeed a way to double-free an skb. If iwl_mvm_tx_skb_sta returns non-zero, then the 'skb' sent into the method will be freed. But, in case where we build TSO skb buffer, the skb may also be freed in error case. So, return 0 in that particular error case and do cleanup manually. BUG: KASAN: use-after-free in __list_del_entry_valid+0x12/0x90 iwlwifi 0000:06:00.0: 0x00000000 | tsf hi Read of size 8 at addr ffff88813cfa4ba0 by task btserver/9650 CPU: 4 PID: 9650 Comm: btserver Tainted: G W 5.19.8+ #5 iwlwifi 0000:06:00.0: 0x00000000 | time gp1 Hardware name: Default string Default string/SKYBAY, BIOS 5.12 02/19/2019 Call Trace: <TASK> dump_stack_lvl+0x55/0x6d print_report.cold.12+0xf2/0x684 iwlwifi 0000:06:00.0: 0x1D0915A8 | time gp2 ? __list_del_entry_valid+0x12/0x90 kasan_report+0x8b/0x180 iwlwifi 0000:06:00.0: 0x00000001 | uCode revision type ? __list_del_entry_valid+0x12/0x90 __list_del_entry_valid+0x12/0x90 iwlwifi 0000:06:00.0: 0x00000048 | uCode version major tcp_update_skb_after_send+0x5d/0x170 __tcp_transmit_skb+0xb61/0x15c0 iwlwifi 0000:06:00.0: 0xDAA05125 | uCode version minor ? __tcp_select_window+0x490/0x490 iwlwifi 0000:06:00.0: 0x00000420 | hw version ? trace_kmalloc_node+0x29/0xd0 ? __kmalloc_node_track_caller+0x12a/0x260 ? memset+0x1f/0x40 ? __build_skb_around+0x125/0x150 ? __alloc_skb+0x1d4/0x220 ? skb_zerocopy_clone+0x55/0x230 iwlwifi 0000:06:00.0: 0x00489002 | board version ? kmalloc_reserve+0x80/0x80 ? rcu_read_lock_bh_held+0x60/0xb0 tcp_write_xmit+0x3f1/0x24d0 iwlwifi 0000:06:00.0: 0x034E001C | hcmd ? __check_object_size+0x180/0x350 iwlwifi 0000:06:00.0: 0x24020000 | isr0 tcp_sendmsg_locked+0x8a9/0x1520 iwlwifi 0000:06:00.0: 0x01400000 | isr1 ? tcp_sendpage+0x50/0x50 iwlwifi 0000:06:00.0: 0x48F0000A | isr2 ? lock_release+0xb9/0x400 ? tcp_sendmsg+0x14/0x40 iwlwifi 0000:06:00.0: 0x00C3080C | isr3 ? lock_downgrade+0x390/0x390 ? do_raw_spin_lock+0x114/0x1d0 iwlwifi 0000:06:00.0: 0x00200000 | isr4 ? rwlock_bug.part.2+0x50/0x50 iwlwifi 0000:06:00.0: 0x034A001C | last cmd Id ? rwlock_bug.part.2+0x50/0x50 ? lockdep_hardirqs_on_prepare+0xe/0x200 iwlwifi 0000:06:00.0: 0x0000C2F0 | wait_event ? __local_bh_enable_ip+0x87/0xe0 ? inet_send_prepare+0x220/0x220 iwlwifi 0000:06:00.0: 0x000000C4 | l2p_control tcp_sendmsg+0x22/0x40 sock_sendmsg+0x5f/0x70 iwlwifi 0000:06:00.0: 0x00010034 | l2p_duration __sys_sendto+0x19d/0x250 iwlwifi 0000:06:00.0: 0x00000007 | l2p_mhvalid ? __ia32_sys_getpeername+0x40/0x40 iwlwifi 0000:06:00.0: 0x00000000 | l2p_addr_match ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_sched_held+0x5a/0xd0 ? lock_release+0xb9/0x400 ? lock_downgrade+0x390/0x390 ? ktime_get+0x64/0x130 ? ktime_get+0x8d/0x130 ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? rcu_read_lock_bh_held+0xb0/0xb0 __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f1d126e4531 Code: 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 35 80 0c 00 41 89 ca 8b 00 85 c0 75 1c 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 67 c3 66 0f 1f 44 00 00 55 48 83 ec 20 48 89 RSP: 002b:00007ffe21a679d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000000000000ffdc RCX: 00007f1d126e4531 RDX: 0000000000010000 RSI: 000000000374acf0 RDI: 0000000000000014 RBP: 00007ffe21a67ac0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000010 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 </TASK> Allocated by task 9650: kasan_save_stack+0x1c/0x40 __kasan_slab_alloc+0x6d/0x90 kmem_cache_alloc_node+0xf3/0x2b0 __alloc_skb+0x191/0x220 tcp_stream_alloc_skb+0x3f/0x330 tcp_sendmsg_locked+0x67c/0x1520 tcp_sendmsg+0x22/0x40 sock_sendmsg+0x5f/0x70 __sys_sendto+0x19d/0x250 __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 9650: kasan_save_stack+0x1c/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0x102/0x170 kmem_cache_free+0xc8/0x3e0 iwl_mvm_mac_itxq_xmit+0x124/0x270 [iwlmvm] ieee80211_queue_skb+0x874/0xd10 [mac80211] ieee80211_xmit_fast+0xf80/0x1180 [mac80211] __ieee80211_subif_start_xmit+0x287/0x680 [mac80211] ieee80211_subif_start_xmit+0xcd/0x730 [mac80211] dev_hard_start_xmit+0xf6/0x420 __dev_queue_xmit+0x165b/0x1b50 ip_finish_output2+0x66e/0xfb0 __ip_finish_output+0x487/0x6d0 ip_output+0x11c/0x350 __ip_queue_xmit+0x36b/0x9d0 __tcp_transmit_skb+0xb35/0x15c0 tcp_write_xmit+0x3f1/0x24d0 tcp_sendmsg_locked+0x8a9/0x1520 tcp_sendmsg+0x22/0x40 sock_sendmsg+0x5f/0x70 __sys_sendto+0x19d/0x250 __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff88813cfa4b40 which belongs to the cache skbuff_fclone_cache of size 472 The buggy address is located 96 bytes inside of 472-byte region [ffff88813cfa4b40, ffff88813cfa4d18) The buggy address belongs to the physical page: page:ffffea0004f3e900 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813cfa6c40 pfn:0x13cfa4 head:ffffea0004f3e900 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x5fff8000010200(slab|head|node=0|zone=2|lastcpupid=0x3fff) raw: 005fff8000010200 ffffea0004656b08 ffffea0008e8cf08 ffff8881081a5240 raw: ffff88813cfa6c40 0000000000170015 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88813cfa4a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88813cfa4b00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb >ffff88813cfa4b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88813cfa4c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88813cfa4c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 08f7d8b69aaf ("iwlwifi: mvm: bring back mvm GSO code") Link: https://lore.kernel.org/linux-wireless/20220928193057.16132-1-greearb@candelatech.com/ Tested-by: Amol Jawale <amol.jawale@candelatech.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20221123225313.21b1ee31d666.I3b3ba184433dd2a544d91eeeda29b467021824ae@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queueJose Ignacio Tornos Martinez
[ Upstream commit 14a3aacf517a9de725dd3219dbbcf741e31763c4 ] After successfull station association, if station queues are disabled for some reason, the related lists are not emptied. So if some new element is added to the list in iwl_mvm_mac_wake_tx_queue, it can match with the old one and produce a BUG like this: [ 46.535263] list_add corruption. prev->next should be next (ffff94c1c318a360), but was 0000000000000000. (prev=ffff94c1d02d3388). [ 46.535283] ------------[ cut here ]------------ [ 46.535284] kernel BUG at lib/list_debug.c:26! [ 46.535290] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 46.585304] CPU: 0 PID: 623 Comm: wpa_supplicant Not tainted 5.19.0-rc3+ #1 [ 46.592380] Hardware name: Dell Inc. Inspiron 660s/0478VN , BIOS A07 08/24/2012 [ 46.600336] RIP: 0010:__list_add_valid.cold+0x3d/0x3f [ 46.605475] Code: f2 4c 89 c1 48 89 fe 48 c7 c7 c8 40 67 93 e8 20 cc fd ff 0f 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 70 40 67 93 e8 09 cc fd ff <0f> 0b 48 89 fe 48 c7 c7 00 41 67 93 e8 f8 cb fd ff 0f 0b 48 89 d1 [ 46.624469] RSP: 0018:ffffb20800ab76d8 EFLAGS: 00010286 [ 46.629854] RAX: 0000000000000075 RBX: ffff94c1c318a0e0 RCX: 0000000000000000 [ 46.637105] RDX: 0000000000000201 RSI: ffffffff9365e100 RDI: 00000000ffffffff [ 46.644356] RBP: ffff94c1c5f43370 R08: 0000000000000075 R09: 3064316334396666 [ 46.651607] R10: 3364323064316334 R11: 39666666663d7665 R12: ffff94c1c5f43388 [ 46.658857] R13: ffff94c1d02d3388 R14: ffff94c1c318a360 R15: ffff94c1cf2289c0 [ 46.666108] FS: 00007f65634ff7c0(0000) GS:ffff94c1da200000(0000) knlGS:0000000000000000 [ 46.674331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 46.680170] CR2: 00007f7dfe984460 CR3: 000000010e894003 CR4: 00000000000606f0 [ 46.687422] Call Trace: [ 46.689906] <TASK> [ 46.691950] iwl_mvm_mac_wake_tx_queue+0xec/0x15c [iwlmvm] [ 46.697601] ieee80211_queue_skb+0x4b3/0x720 [mac80211] [ 46.702973] ? sta_info_get+0x46/0x60 [mac80211] [ 46.707703] ieee80211_tx+0xad/0x110 [mac80211] [ 46.712355] __ieee80211_tx_skb_tid_band+0x71/0x90 [mac80211] ... In order to avoid this problem, we must also remove the related lists when station queues are disabled. Fixes: cfbc6c4c5b91c ("iwlwifi: mvm: support mac80211 TXQs model") Reported-by: Takayuki Nagata <tnagata@redhat.com> Reported-by: Petr Stourac <pstourac@redhat.com> Tested-by: Petr Stourac <pstourac@redhat.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220719153542.81466-1-jtornosm@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14iwlwifi: mvm: fix assert 1F04 upon reconfigEmmanuel Grumbach
commit 9d096e3d3061dbf4ee10e2b59fc2c06e05bdb997 upstream. When we reconfig we must not send the MAC_POWER command that relates to a MAC that was not yet added to the firmware. Ignore those in the iterator. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20220517120044.ed2ffc8ce732.If786e19512d0da4334a6382ea6148703422c7d7b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15iwlwifi: mvm: Fix an error code in iwl_mvm_up()Dan Carpenter
[ Upstream commit 583d18336abdfb1b355270289ff8f6a2608ba905 ] Return -ENODEV instead of success on this error path. Fixes: dd36a507c806 ("iwlwifi: mvm: look for the first supported channel when add/remove phy ctxt") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210816183930.GA2068@kili Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-19iwlwifi: don't advertise TWT supportGolan Ben Ami
[ Upstream commit 1db5fcbba2631277b78d7f8aff99c9607d29f6d8 ] Some APs misbehave when TWT is used and cause our firmware to crash. We don't know a reasonable way to detect and work around this problem in the FW yet. To prevent these crashes, disable TWT in the driver by stopping to advertise TWT support. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215523 Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> [reworded the commit message] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20220301072926.153969-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27iwlwifi: mvm: Increase the scan timeout guard to 30 secondsIlan Peer
commit ced50f1133af12f7521bb777fcf4046ca908fb77 upstream. With the introduction of 6GHz channels the scan guard timeout should be adjusted to account for the following extreme case: - All 6GHz channels are scanned passively: 58 channels. - The scan is fragmented with the following parameters: 3 fragments, 95 TUs suspend time, 44 TUs maximal out of channel time. The above would result with scan time of more than 24 seconds. Thus, set the timeout to 30 seconds. Cc: stable@vger.kernel.org Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210090244.3c851b93aef5.I346fa2e1d79220a6770496e773c6f87a2ad9e6c4@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27iwlwifi: mvm: Fix calculation of frame lengthIlan Peer
[ Upstream commit 40a0b38d7a7f91a6027287e0df54f5f547e8d27e ] The RADA might include in the Rx frame the MIC and CRC bytes. These bytes should be removed for non monitor interfaces and should not be passed to mac80211. Fix the Rx processing to remove the extra bytes on non monitor cases. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.098be12c801e.I1d81733d8a75b84c3b20eb6e0d14ab3405ca6a86@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27iwlwifi: mvm: synchronize with FW after multicast commandsJohannes Berg
[ Upstream commit db66abeea3aefed481391ecc564fb7b7fb31d742 ] If userspace installs a lot of multicast groups very quickly, then we may run out of command queue space as we send the updates in an asynchronous fashion (due to locking concerns), and the CPU can create them faster than the firmware can process them. This is true even when mac80211 has a work struct that gets scheduled. Fix this by synchronizing with the firmware after sending all those commands - outside of the iteration we can send a synchronous echo command that just has the effect of the CPU waiting for the prior asynchronous commands to finish. This also will cause fewer of the commands to be sent to the firmware overall, because the work will only run once when rescheduled multiple times while it's running. Link: https://bugzilla.kernel.org/show_bug.cgi?id=213649 Suggested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reported-by: Maximilian Ernestus <maximilian@ernestus.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.51aea5b79ea4.I88a44798efda16e9fe480fb3e94224931d311b29@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08iwlwifi: mvm: retry init flow if failedMordechay Goodstein
commit 5283dd677e52af9db6fe6ad11b2f12220d519d0c upstream. In some very rare cases the init flow may fail. In many cases, this is recoverable, so we can retry. Implement a loop to retry two more times after the first attempt failed. This can happen in two different situations, namely during probe and during mac80211 start. For the first case, a simple loop is enough. For the second case, we need to add a flag to prevent mac80211 from trying to restart it as well, leaving full control with the driver. Cc: <stable@vger.kernel.org> Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20211110150132.57514296ecab.I52a0411774b700bdc7dedb124d8b59bf99456eb2@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17iwlwifi: mvm: disable RX-diversity in powersaveJohannes Berg
[ Upstream commit e5322b9ab5f63536c41301150b7ce64605ce52cc ] Just like we have default SMPS mode as dynamic in powersave, we should not enable RX-diversity in powersave, to reduce power consumption when connected to a non-MIMO AP. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.fc896bc5cdaa.I1d11da71b8a5cbe921a37058d5f578f1b14a2023@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22iwlwifi: mvm: fix access to BSS elementsJohannes Berg
[ Upstream commit 6c608cd6962ebdf84fd3de6d42f88ed64d2f4e1b ] BSS elements are protected using RCU, so we need to use RCU properly to access them, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210805130823.fd8b5791ab44.Iba26800a6301078d3782fb249c476dd8ac2bf3c6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22iwlwifi: mvm: avoid static queue number aliasingJohannes Berg
[ Upstream commit c6ce1c74ef2923b8ffd85f7f8b486f804f343b39 ] When TVQM is enabled (iwl_mvm_has_new_tx_api() is true), then queue numbers are just sequentially assigned 0, 1, 2, ... Prior to TVQM, in DQA, there were some statically allocated queue numbers: * IWL_MVM_DQA_AUX_QUEUE == 1, * both IWL_MVM_DQA_INJECT_MONITOR_QUEUE and IWL_MVM_DQA_P2P_DEVICE_QUEUE == 2, and * IWL_MVM_DQA_AP_PROBE_RESP_QUEUE == 9. Now, these values are assigned to the members mvm->aux_queue, mvm->snif_queue, mvm->probe_queue and mvm->p2p_dev_queue by default. Normally, this doesn't really matter, and if TVQM is in fact available we override them to the real values after allocating a queue for use there. However, this allocation doesn't always happen. For example, for mvm->p2p_dev_queue (== 2) it only happens when the P2P Device interface is started, if any. If it's not started, the value in mvm->p2p_dev_queue remains 2. This wouldn't really matter all that much if it weren't for iwl_mvm_is_static_queue() which checks a queue number against one of those four static numbers. Now, if no P2P Device or monitor interface is added then queue 2 may be dynamically allocated, yet alias mvm->p2p_dev_queue or mvm->snif_queue, and thus iwl_mvm_is_static_queue() erroneously returns true for it. If it then gets full, all interface queues are stopped, instead of just backpressuring against the one TXQ that's really the only affected one. This clearly can lead to issues, as everything is stopped even if just a single TXQ filled its corresponding HW queue, if it happens to have an appropriate number (2 or 9, AUX is always reassigned.) Due to a mac80211 bug, this also led to a situation in which the queues remained stopped across a deauthentication and then attempts to connect to a new AP started failing, but that's fixed separately. Fix all of this by simply initializing the queue numbers to the invalid value until they're used, if TVQM is enabled, and also setting them back to that value when the queues are later freed again. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802172232.2e47e623f9e2.I9b0830dafbb68ef35b7b8f0f46160abec02ac7d0@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22iwlwifi: mvm: fix a memory leak in iwl_mvm_mac_ctxt_beacon_changedZhang Qilong
[ Upstream commit 0f5d44ac6e55551798dd3da0ff847c8df5990822 ] If beacon_inject_active is true, we will return without freeing beacon. Fid that by freeing it before returning. Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> [reworded the commit message] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210802172232.d16206ca60fc.I9984a9b442c84814c307cee3213044e24d26f38a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19iwlwifi: mvm: don't change band on bound PHY contextsJohannes Berg
[ Upstream commit 8835a64f74c46baebfc946cd5a2c861b866ebcee ] When we have a P2P Device active, we attempt to only change the PHY context it uses when we get a new remain-on-channel, if the P2P Device is the only user of the PHY context. This is fine if we're switching within a band, but if we're switching bands then the switch implies a removal and re-add of the PHY context, which isn't permitted by the firmware while it's bound to an interface. Fix the code to skip the unbind/release/... cycle only if the band doesn't change (or we have old devices that can switch the band on the fly as well.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210612142637.e9ac313f70f3.I713b9d109957df7e7d9ed0861d5377ce3f8fccd3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14mac80211: remove iwlwifi specific workaround that broke sta NDP txFelix Fietkau
commit e41eb3e408de27982a5f8f50b2dd8002bed96908 upstream. Sending nulldata packets is important for sw AP link probing and detecting 4-address mode links. The checks that dropped these packets were apparently added to work around an iwlwifi firmware bug with multi-TID aggregation. Fixes: 41cbb0f5a295 ("mac80211: add support for HE") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210619101517.90806-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-13iwlwifi: mvm: guard against device removal in reprobeJohannes Berg
[ Upstream commit 7a21b1d4a728a483f07c638ccd8610d4b4f12684 ] If we get into a problem severe enough to attempt a reprobe, we schedule a worker to do that. However, if the problem gets more severe and the device is actually destroyed before this worker has a chance to run, we use a free device. Bump up the reference count of the device until the worker runs to avoid this situation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.871f0892e4b2.I94819e11afd68d875f3e242b98bef724b8236f1e@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13iwlwifi: mvm: invalidate IDs of internal stations at mvm startGregory Greenman
[ Upstream commit e223e42aac30bf81f9302c676cdf58cf2bf36950 ] Having sta_id not set for aux_sta and snif_sta can potentially lead to a hard to debug issue in case remove station is called without an add. In this case sta_id 0, an unrelated regular station, will be removed. In fact, we do have a FW assert that occures rarely and from the debug data analysis it looks like sta_id 0 is removed by mistake, though it's hard to pinpoint the exact flow. The WARN_ON in this patch should help to find it. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.5dc6dd9b22d5.I2add1b5ad24d0d0a221de79d439c09f88fcaf15d@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13iwlwifi: mvm: take mutex for calling iwl_mvm_get_sync_time()Johannes Berg
[ Upstream commit 5c56d862c749669d45c256f581eac4244be00d4d ] We need to take the mutex to call iwl_mvm_get_sync_time(), do it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.4bb5ccf881a6.I62973cbb081e80aa5b0447a5c3b9c3251a65cf6b@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13iwlwifi: mvm: skip power command when unbinding vif during CSASara Sharon
[ Upstream commit bf544e9aa570034e094a8a40d5f9e1e2c4916d18 ] In the new CSA flow, we remain associated during CSA, but still do a unbind-bind to the vif. However, sending the power command right after when vif is unbound but still associated causes FW to assert (0x3400) since it cannot tell the LMAC id. Just skip this command, we will send it again in a bit, when assigning the new context. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.64a2254ac5c3.Iaa3a9050bf3d7c9cd5beaf561e932e6defc12ec3@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-10iwlwifi: mvm: don't send RFH_QUEUE_CONFIG_CMD with no queuesLuca Coelho
commit 64f55156f7adedb1ac5bb9cdbcbc9ac05ff5a724 upstream. If we have only a single RX queue, such as when MSI-X is not available, we should not send the RFH_QUEUEU_CONFIG_CMD, because our only queue is the same as the command queue and will be configured as part of the context info. Our code was actually trying to send the command with 0 queues, which caused UMAC assert 0x1D04. Fix that by not sending the command when we have a single queue. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.c35eeb3299f8.I08f79a6ebe150a7d180b7005b24504bfdba6d8b5@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30iwlwifi: mvm: hook up missing RX handlersJohannes Berg
[ Upstream commit 8a59d39033c35bb484f6bd91891db86ebe07fdc2 ] The RX handlers for probe response data and channel switch weren't hooked up properly, fix that. Fixes: 86e177d80ff7 ("iwlwifi: mvm: add NOA and CSA to a probe response") Fixes: d3a108a48dc6 ("iwlwifi: mvm: Support CSA countdown offloading") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.2d07dcee0d35.I07a61b5d734478db57d9434ff303e4c90bf6c32b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-16iwlwifi: mvm: fix kernel panic in case of assert during CSASara Sharon
[ Upstream commit fe56d05ee6c87f6a1a8c7267affd92c9438249cc ] During CSA, we briefly nullify the phy context, in __iwl_mvm_unassign_vif_chanctx. In case we have a FW assert right after it, it remains NULL though. We end up running into endless loop due to mac80211 trying repeatedly to move us to ASSOC state, and we keep returning -EINVAL. Later down the road we hit a kernel panic. Detect and avoid this endless loop. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201107104557.d64de2c17bff.Iedd0d2afa20a2aacba5259a5cae31cb3a119a4eb@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-02iwlwifi: mvm: write queue_sync_state only for syncAvraham Stern
[ Upstream commit 97cc16943f23078535fdbce4f6391b948b4ccc08 ] We use mvm->queue_sync_state to wait for synchronous queue sync messages, but if an async one happens inbetween we shouldn't clear mvm->queue_sync_state after sending the async one, that can run concurrently (at least from the CPU POV) with another synchronous queue sync. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 3c514bf831ac ("iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201107104557.51a3148f2c14.I0772171dbaec87433a11513e9586d98b5d920b5f@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29iwlwifi: mvm: split a print to avoid a WARNING in ROCEmmanuel Grumbach
[ Upstream commit 903b3f9badf1d54f77b468b96706dab679b45b14 ] A print in the remain on channel code was too long and caused a WARNING, split it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: dc28e12f2125 ("iwlwifi: mvm: ROC: Extend the ROC max delay duration & limit ROC duration") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200930102759.58d57c0bdc68.Ib06008665e7bf1199c360aa92691d9c74fb84990@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-29iwlwifi: mvm: don't call iwl_mvm_free_inactive_queue() under RCUJohannes Berg
commit fbb1461ad1d6eacca9beb69a2f3ce1b5398d399b upstream. iwl_mvm_free_inactive_queue() will sleep in synchronize_net() under some circumstances, so don't call it under RCU. There doesn't appear to be a need for RCU protection around this particular call. Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200403112332.0f49448c133d.I17fd308bc4a9491859c9b112f4eb5d2c3fc18d7d@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22iwlwifi: mvm: fix aux station leakSharon
[ Upstream commit f327236df2afc8c3c711e7e070f122c26974f4da ] When mvm is initialized we alloc aux station with aux queue. We later free the station memory when driver is stopped, but we never free the queue's memory, which casues a leak. Add a proper de-initialization of the station. Signed-off-by: Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200529092401.0121c5be55e9.Id7516fbb3482131d0c9dfb51ff20b226617ddb49@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22iwlwifi: avoid debug max amsdu config overwriting itselfMordechay Goodstein
[ Upstream commit a65a5824298b06049dbaceb8a9bd19709dc9507c ] If we set amsdu_len one after another the second one overwrites the orig_amsdu_len so allow only moving from debug to non debug state. Also the TLC update check was wrong: it was checking that also the orig is smaller then the new updated size, which is not the case in debug amsdu mode. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: af2984e9e625 ("iwlwifi: mvm: add a debugfs entry to set a fixed size AMSDU for all TX packets") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200424182644.e565446a4fce.I9729d8c520d8b8bb4de9a5cdc62e01eb85168aac@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-17iwlwifi: mvm: fix NVM check for 3168 devicesLuca Coelho
[ Upstream commit b3f20e098293892388d6a0491d6bbb2efb46fbff ] We had a check on !NVM_EXT and then a check for NVM_SDP in the else block of this if. The else block, obviously, could only be reached if using NVM_EXT, so it would never be NVM_SDP. Fix that by checking whether the nvm_type is IWL_NVM instead of checking for !IWL_NVM_EXT to solve this issue. Reported-by: Stefan Sperling <stsp@stsp.name> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-29iwlwifi: mvm: fix inactive TID removal return value usageJohannes Berg
commit e6d419f943318e2b903e380dfd52a8dda6db3021 upstream. The function iwl_mvm_remove_inactive_tids() returns bool, so we should just check "if (ret)", not "if (ret >= 0)" (which would do nothing useful here). We obviously therefore cannot use the return value of the function for the free_queue, we need to use the queue (i) we're currently dealing with instead. Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.9d862ed72535.I9e27ccc3ee3c8855fc13682592b571581925dfbd@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29iwlwifi: mvm: limit maximum queue appropriatelyJohannes Berg
commit e5b72e3bc4763152e24bf4b8333bae21cc526c56 upstream. Due to some hardware issues, queue 31 isn't usable on devices that have 32 queues (7000, 8000, 9000 families), which is correctly reflected in the configuration and TX queue initialization. However, the firmware API and queue allocation code assumes that there are 32 queues, and if something actually attempts to use #31 this leads to a NULL-pointer dereference since it's not allocated. Fix this by limiting to 31 in the IWL_MVM_DQA_MAX_DATA_QUEUE, and also add some code to catch this earlier in the future, if the configuration changes perhaps. Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.98a79be2db6a.I3a4af6b03b87a6bc18db9b1ff9a812f397bee1fc@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29iwlwifi: mvm: beacon statistics shouldn't go backwardsMordechay Goodstein
commit 290d5e4951832e39d10f4184610dbf09038f8483 upstream. We reset statistics also in case that we didn't reassoc so in this cases keep last beacon counter. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.1f9142751fbc.Ifbfd0f928a0a761110b8f4f2ca5483a61fb21131@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29mac80211: populate debugfs only after cfg80211 initJohannes Berg
commit 6cb5f3ea4654faf8c28b901266e960b1a4787b26 upstream. When fixing the initialization race, we neglected to account for the fact that debugfs is initialized in wiphy_register(), and some debugfs things went missing (or rather were rerooted to the global debugfs root). Fix this by adding debugfs entries only after wiphy_register(). This requires some changes in the rate control code since it currently adds debugfs at alloc time, which can no longer be done after the reordering. Reported-by: Jouni Malinen <j@w1.fi> Reported-by: kernel test robot <rong.a.chen@intel.com> Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Felix Fietkau <nbd@nbd.name> Cc: stable@vger.kernel.org Fixes: 52e04b4ce5d0 ("mac80211: fix race in ieee80211_register_hw()") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/20200423111344.0e00d3346f12.Iadc76a03a55093d94391fc672e996a458702875d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17iwlwifi: mvm: Fix rate scale NSS configurationIlan Peer
[ Upstream commit ce19801ba75a902ab515dda03b57738c708d0781 ] The TLC configuration did not take into consideration the station's SMPS configuration, and thus configured rates for 2 NSS even if static SMPS was reported by the station. Fix this. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200306151129.b4f940d13eca.Ieebfa889d08205a3a961ae0138fb5832e8a0f9c1@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-08iwlwifi: consider HE capability when setting LDPCMordechay Goodstein
commit cb377dfda1755b3bc01436755d866c8e5336a762 upstream. The AP may set the LDPC capability only in HE (IEEE80211_HE_PHY_CAP1), but we were checking it only in the HT capabilities. If we don't use this capability when required, the DSP gets the wrong configuration in HE and doesn't work properly. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: befebbb30af0 ("iwlwifi: rs: consider LDPC capability in case of HE") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200306151128.492d167c1a25.I1ad1353dbbf6c99ae57814be750f41a1c9f7f4ac@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01iwlwifi: mvm: fix non-ACPI functionJohannes Berg
commit 7937fd3227055892e169f4b34d21157e57d919e2 upstream. The code now compiles without ACPI, but there's a warning since iwl_mvm_get_ppag_table() isn't used, and iwl_mvm_ppag_init() must not unconditionally fail but return success instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [Drop hunk removing iwl_mvm_get_ppag_table() since it doesn't exist in 5.4] Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18iwlwifi: mvm: Do not require PHY_SKU NVM section for 3168 devicesDan Moulding
commit a9149d243f259ad8f02b1e23dfe8ba06128f15e1 upstream. The logic for checking required NVM sections was recently fixed in commit b3f20e098293 ("iwlwifi: mvm: fix NVM check for 3168 devices"). However, with that fixed the else is now taken for 3168 devices and within the else clause there is a mandatory check for the PHY_SKU section. This causes the parsing to fail for 3168 devices. The PHY_SKU section is really only mandatory for the IWL_NVM_EXT layout (the phy_sku parameter of iwl_parse_nvm_data is only used when the NVM type is IWL_NVM_EXT). So this changes the PHY_SKU section check so that it's only mandatory for IWL_NVM_EXT. Fixes: b3f20e098293 ("iwlwifi: mvm: fix NVM check for 3168 devices") Signed-off-by: Dan Moulding <dmoulding@me.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-24iwlwifi: mvm: Check the sta is not NULL in iwl_mvm_cfg_he_sta()Andrei Otcheretianski
[ Upstream commit 12d47f0ea5e0aa63f19ba618da55a7c67850ca10 ] Fix a kernel panic by checking that the sta is not NULL. This could happen during a reconfig flow, as mac80211 moves the sta between all the states without really checking if the previous state was successfully set. So, if for some reason we failed to add back the station, subsequent calls to sta_state() callback will be done when the station is NULL. This would result in a following panic: BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 IP: iwl_mvm_cfg_he_sta+0xfc/0x690 [iwlmvm] [..] Call Trace: iwl_mvm_mac_sta_state+0x629/0x6f0 [iwlmvm] drv_sta_state+0xf4/0x950 [mac80211] ieee80211_reconfig+0xa12/0x2180 [mac80211] ieee80211_restart_work+0xbb/0xe0 [mac80211] process_one_work+0x1e2/0x610 worker_thread+0x4d/0x3e0 [..] Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24iwlwifi: mvm: Fix thermal zone registrationAndrei Otcheretianski
[ Upstream commit baa6cf8450b72dcab11f37c47efce7c5b9b8ad0f ] Use a unique name when registering a thermal zone. Otherwise, with multiple NICS, we hit the following warning during the unregistration. WARNING: CPU: 2 PID: 3525 at fs/sysfs/group.c:255 RIP: 0010:sysfs_remove_group+0x80/0x90 Call Trace: dpm_sysfs_remove+0x57/0x60 device_del+0x5a/0x350 ? sscanf+0x4e/0x70 device_unregister+0x1a/0x60 hwmon_device_unregister+0x4a/0xa0 thermal_remove_hwmon_sysfs+0x175/0x1d0 thermal_zone_device_unregister+0x188/0x1e0 iwl_mvm_thermal_exit+0xe7/0x100 [iwlmvm] iwl_op_mode_mvm_stop+0x27/0x180 [iwlmvm] _iwl_op_mode_stop.isra.3+0x2b/0x50 [iwlwifi] iwl_opmode_deregister+0x90/0xa0 [iwlwifi] __exit_compat+0x10/0x2c7 [iwlmvm] __x64_sys_delete_module+0x13f/0x270 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-14iwlwifi: mvm: avoid use after free for pmsr requestAvraham Stern
commit cc4255eff523f25187bb95561642941de0e57497 upstream. When a FTM request is aborted, the driver sends the abort command to the fw and waits for a response. When the response arrives, the driver calls cfg80211_pmsr_complete() for that request. However, cfg80211 frees the requested data immediately after sending the abort command, so this may lead to use after free. Fix it by clearing the request data in the driver when the abort command arrives and ignoring the fw notification that will come afterwards. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Fixes: fc36ffda3267 ("iwlwifi: mvm: support FTM initiator") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11iwlwifi: don't throw error when trying to remove IGTKLuca Coelho
commit 197288d5ba8a5289f22d3aeb4fca3824bfd9b4af upstream. The IGTK keys are only removed by mac80211 after it has already removed the AP station. This causes the driver to throw an error because mac80211 is trying to remove the IGTK when the station doesn't exist anymore. The firmware is aware that the station has been removed and can deal with it the next time we try to add an IGTK for a station, so we shouldn't try to remove the key if the station ID is IWL_MVM_INVALID_STA. Do this by removing the check for mvm_sta before calling iwl_mvm_send_sta_igtk() and check return from that function gracefully if the station ID is invalid. Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-05iwlwifi: Don't ignore the cap field upon mcc updateHaim Dreyfuss
[ Upstream commit 2763bba6328c53c455d8f7f5302b80030551c31b ] When receiving a new MCC driver get all the data about the new country code and its regulatory information. Mistakenly, we ignored the cap field, which includes global regulatory information which should be applies to every channel. Fix it. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-05iwlwifi: pcie: allocate smaller dev_cmd for TX headersJohannes Berg
[ Upstream commit a89c72ffd07369f5ccc74f0332d2785a7077241d ] As noted in the previous commit, due to the way we allocate the dev_cmd headers with 324 byte size, and 4/8 byte alignment, the part we use of them (bytes 20..40-68) could still cross a page and thus 2^32 boundary. Address this by using alignment to ensure that the allocation cannot cross a page boundary, on hardware that's affected. To make that not cause more memory consumption, reduce the size of the allocations to the necessary size - we go from 324 bytes in each allocation to 60/68 on gen2 depending on family, and ~120 or so on gen1 (so on gen1 it's a pure reduction in size, since we don't need alignment there). To avoid size and clearing issues, add a new structure that's just the header, and use kmem_cache_zalloc(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-29iwlwifi: mvm: fix potential SKB leak on TXQ TXJohannes Berg
commit df2378ab0f2a9dd4cf4501268af1902cc4ebacd8 upstream. When we transmit after TXQ dequeue, we aren't paying attention to the return value of the transmit functions, leading to a potential SKB leak. Refactor the code a bit (and rename ..._tx to ..._tx_sta) to check for this happening. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: cfbc6c4c5b91 ("iwlwifi: mvm: support mac80211 TXQs model") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29iwlwifi: mvm: fix SKB leak on invalid queueJohannes Berg
commit b9f726c94224e863d4d3458dfec2e7e1284a39ce upstream. It used to be the case that if we got here, we wouldn't warn but instead allocate the queue (DQA). With using the mac80211 TXQs model this changed, and we really have nothing to do with the frame here anymore, hence the warning now. However, clearly we missed in coding & review that this is now a pure error path and leaks the SKB if we return 0 instead of an indication that the SKB needs to be freed. Fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: cfbc6c4c5b91 ("iwlwifi: mvm: support mac80211 TXQs model") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29iwlwifi: mvm: don't send the IWL_MVM_RXQ_NSSN_SYNC notif to Rx queuesEmmanuel Grumbach
commit d829229e35f302fd49c052b5c5906c90ecf9911d upstream. The purpose of this was to keep all the queues updated with the Rx sequence numbers because unlikely yet possible situations where queues can't understand if a specific packet needs to be dropped or not. Unfortunately, it was reported that this caused issues in our DMA engine. We don't fully understand how this is related, but this is being currently debugged. For now, just don't send this notification to the Rx queues. This de-facto reverts my commit 3c514bf831ac12356b695ff054bef641b9e99593: iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues This issue was reported here: https://bugzilla.kernel.org/show_bug.cgi?id=204873 https://bugzilla.kernel.org/show_bug.cgi?id=205001 and others maybe. Fixes: 3c514bf831ac ("iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues") CC: <stable@vger.kernel.org> # 5.3+ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-27 04:59:44 +0000