aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/usb/lan78xx.c
AgeCommit message (Collapse)Author
2019-01-14lan78xx: Resolve issue with changing MAC addressJason Martinsen
commit 15515aaaa69659c502003926a2067ee76176148a upstream. Current state for the lan78xx driver does not allow for changing the MAC address of the interface, without either removing the module (if you compiled it that way) or rebooting the machine. If you attempt to change the MAC address, ifconfig will show the new address, however, the system/interface will not respond to any traffic using that configuration. A few short-term options to work around this are to unload the module and reload it with the new MAC address, change the interface to "promisc", or reboot with the correct configuration to change the MAC. This patch enables the ability to change the MAC address via fairly normal means... ifdown <interface> modify entry in /etc/network/interfaces OR a similar method ifup <interface> Then test via any network communication, such as ICMP requests to gateway. My only test platform for this patch has been a raspberry pi model 3b+. Signed-off-by: Jason Martinsen <jasonmartinsen@msn.com> ----- Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2018-11-04lan78xx: Check for supported Wake-on-LAN modesFlorian Fainelli
[ Upstream commit eb9ad088f96653a26b340f7c447c44cf023d5cdc ] The driver supports a fair amount of Wake-on-LAN modes, but is not checking that the user specified one that is supported. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Woojung Huh <Woojung.Huh@Microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-07-28net: lan78xx: fix rx handling before first packet is sendStefan Wahren
As long the bh tasklet isn't scheduled once, no packet from the rx path will be handled. Since the tx path also schedule the same tasklet this situation only persits until the first packet transmission. So fix this issue by scheduling the tasklet after link reset. Link: https://github.com/raspberrypi/linux/issues/2617 Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Suggested-by: Floris Bos <bos@je-eigen-domein.nl> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: lan78xx: Fix race in tx pending skb size calculationStefan Wahren
The skb size calculation in lan78xx_tx_bh is in race with the start_xmit, which could lead to rare kernel oopses. So protect the whole skb walk with a spin lock. As a benefit we can unlink the skb directly. This patch was tested on Raspberry Pi 3B+ Link: https://github.com/raspberrypi/linux/issues/2608 Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Cc: stable <stable@vger.kernel.org> Signed-off-by: Floris Bos <bos@je-eigen-domein.nl> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26net: lan78xx: Use s/w csum check on VLANs without tag strippingDave Stevenson
Observations of VLANs dropping packets due to invalid checksums when not offloading VLAN tag receive. With VLAN tag stripping enabled no issue is observed. Drop back to s/w checksums if VLAN offload is disabled. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26net: lan78xx: Add support for VLAN tag stripping.Dave Stevenson
The chip supports stripping the VLAN tag and reporting it in metadata. Complete the support for this. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26net: lan78xx: Add support for VLAN filtering.Dave Stevenson
HW_VLAN_CTAG_FILTER was partially implemented, but not advertised to Linux. Complete the implementation of this. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26net: lan78xx: Allow for VLAN headers in timeout calcsDave Stevenson
The frame abort timeout being set by lan78xx_set_rx_max_frame_length didn't account for any VLAN headers, resulting in very low throughput if used with tagged VLANs. Use VLAN_ETH_HLEN instead of ETH_HLEN to correct for this. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16drivers: net: Remove device_node checks with of_mdiobus_register()Florian Fainelli
A number of drivers have the following pattern: if (np) of_mdiobus_register() else mdiobus_register() which the implementation of of_mdiobus_register() now takes care of. Remove that pattern in drivers that strictly adhere to it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Reviewed-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-29lan78xx: Modify error messagesRaghuram Chary J
Modify the error messages when phy registration fails. Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-29lan78xx: Remove DRIVER_VERSION for lan78xx driverRaghuram Chary J
Remove driver version info from the lan78xx driver. Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-29lan78xx: Lan7801 Support for Fixed PHYRaghuram Chary J
Adding Fixed PHY support to the lan78xx driver. Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-20lan78xx: Add support to dump lan78xx registersRaghuram Chary J
In order to dump lan78xx family registers using ethtool, add support at lan78xx driver level. Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-20lan78xx: Read LED states from Device TreePhil Elwell
Add support for DT property "microchip,led-modes", a vector of zero to four cells (u32s) in the range 0-15, each of which sets the mode for one of the LEDs. Some possible values are: 0=link/activity 1=link1000/activity 2=link100/activity 3=link10/activity 4=link100/1000/activity 5=link10/1000/activity 6=link10/100/activity 14=off 15=on These values are given symbolic constants in a dt-bindings header. Also use the presence of the DT property to indicate that the LEDs should be enabled - necessary in the event that no valid OTP or EEPROM is available. Signed-off-by: Phil Elwell <phil@raspberrypi.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-20lan78xx: Read MAC address from DT if presentPhil Elwell
There is a standard mechanism for locating and using a MAC address from the Device Tree. Use this facility in the lan78xx driver to support applications without programmed EEPROM or OTP. At the same time, regularise the handling of the different address sources. Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11lan78xx: Don't reset the interface on openPhil Elwell
Commit 92571a1aae40 ("lan78xx: Connect phy early") moves the PHY initialisation into lan78xx_probe, but lan78xx_open subsequently calls lan78xx_reset. As well as forcing a second round of link negotiation, this reset frequently prevents the phy interrupt from being generated (even though the link is up), rendering the interface unusable. Fix this issue by removing the lan78xx_reset call from lan78xx_open. Fixes: 92571a1aae40 ("lan78xx: Connect phy early") Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11lan78xx: Avoid spurious kevent 4 "error"Phil Elwell
lan78xx_defer_event generates an error message whenever the work item is already scheduled. lan78xx_open defers three events - EVENT_STAT_UPDATE, EVENT_DEV_OPEN and EVENT_LINK_RESET. Being aware of the likelihood (or certainty) of an error message, the DEV_OPEN event is added to the set of pending events directly, relying on the subsequent deferral of the EVENT_LINK_RESET call to schedule the work. Take the same precaution with EVENT_STAT_UPDATE to avoid a totally unnecessary error message. Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11lan78xx: Correctly indicate invalid OTPPhil Elwell
lan78xx_read_otp tries to return -EINVAL in the event of invalid OTP content, but the value gets overwritten before it is returned and the read goes ahead anyway. Make the read conditional as it should be and preserve the error code. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04lan78xx: Connect phy earlyAlexander Graf
When using wicked with a lan78xx device attached to the system, we end up with ethtool commands issued on the device before an ifup got issued. That lead to the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000039c pgd = ffff800035b30000 [0000039c] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] SMP Modules linked in: [...] Supported: Yes CPU: 3 PID: 638 Comm: wickedd Tainted: G E 4.12.14-0-default #1 Hardware name: raspberrypi rpi/rpi, BIOS 2018.03-rc2 02/21/2018 task: ffff800035e74180 task.stack: ffff800036718000 PC is at phy_ethtool_ksettings_get+0x20/0x98 LR is at lan78xx_get_link_ksettings+0x44/0x60 [lan78xx] pc : [<ffff0000086f7f30>] lr : [<ffff000000dcca84>] pstate: 20000005 sp : ffff80003671bb20 x29: ffff80003671bb20 x28: ffff800035e74180 x27: ffff000008912000 x26: 000000000000001d x25: 0000000000000124 x24: ffff000008f74d00 x23: 0000004000114809 x22: 0000000000000000 x21: ffff80003671bbd0 x20: 0000000000000000 x19: ffff80003671bbd0 x18: 000000000000040d x17: 0000000000000001 x16: 0000000000000000 x15: 0000000000000000 x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000000000020 x11: 0101010101010101 x10: fefefefefefefeff x9 : 7f7f7f7f7f7f7f7f x8 : fefefeff31677364 x7 : 0000000080808080 x6 : ffff80003671bc9c x5 : ffff80003671b9f8 x4 : ffff80002c296190 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff80003671bbd0 x0 : ffff80003671bc00 Process wickedd (pid: 638, stack limit = 0xffff800036718000) Call trace: Exception stack(0xffff80003671b9e0 to 0xffff80003671bb20) b9e0: ffff80003671bc00 ffff80003671bbd0 0000000000000000 0000000000000000 ba00: ffff80002c296190 ffff80003671b9f8 ffff80003671bc9c 0000000080808080 ba20: fefefeff31677364 7f7f7f7f7f7f7f7f fefefefefefefeff 0101010101010101 ba40: 0000000000000020 0000000000000000 ffffffffffffffff 0000000000000000 ba60: 0000000000000000 0000000000000001 000000000000040d ffff80003671bbd0 ba80: 0000000000000000 ffff80003671bbd0 0000000000000000 0000004000114809 baa0: ffff000008f74d00 0000000000000124 000000000000001d ffff000008912000 bac0: ffff800035e74180 ffff80003671bb20 ffff000000dcca84 ffff80003671bb20 bae0: ffff0000086f7f30 0000000020000005 ffff80002c296000 ffff800035223900 bb00: 0000ffffffffffff 0000000000000000 ffff80003671bb20 ffff0000086f7f30 [<ffff0000086f7f30>] phy_ethtool_ksettings_get+0x20/0x98 [<ffff000000dcca84>] lan78xx_get_link_ksettings+0x44/0x60 [lan78xx] [<ffff0000087cbc40>] ethtool_get_settings+0x68/0x210 [<ffff0000087cc0d4>] dev_ethtool+0x214/0x2180 [<ffff0000087e5008>] dev_ioctl+0x400/0x630 [<ffff00000879dd00>] sock_do_ioctl+0x70/0x88 [<ffff00000879f5f8>] sock_ioctl+0x208/0x368 [<ffff0000082cde10>] do_vfs_ioctl+0xb0/0x848 [<ffff0000082ce634>] SyS_ioctl+0x8c/0xa8 Exception stack(0xffff80003671bec0 to 0xffff80003671c000) bec0: 0000000000000009 0000000000008946 0000fffff4e841d0 0000aa0032687465 bee0: 0000aaaafa2319d4 0000fffff4e841d4 0000000032687465 0000000032687465 bf00: 000000000000001d 7f7fff7f7f7f7f7f 72606b622e71ff4c 7f7f7f7f7f7f7f7f bf20: 0101010101010101 0000000000000020 ffffffffffffffff 0000ffff7f510c68 bf40: 0000ffff7f6a9d18 0000ffff7f44ce30 000000000000040d 0000ffff7f6f98f0 bf60: 0000fffff4e842c0 0000000000000001 0000aaaafa2c2e00 0000ffff7f6ab000 bf80: 0000fffff4e842c0 0000ffff7f62a000 0000aaaafa2b9f20 0000aaaafa2c2e00 bfa0: 0000fffff4e84818 0000fffff4e841a0 0000ffff7f5ad0cc 0000fffff4e841a0 bfc0: 0000ffff7f44ce3c 0000000080000000 0000000000000009 000000000000001d bfe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 The culprit is quite simple: The driver tries to access the phy left and right, but only actually has a working reference to it when the device is up. The fix thus is quite simple too: Get a reference to the phy on probe already and keep it even when the device is going down. With this patch applied, I can successfully run wicked on my system and bring the interface up and down as many times as I want, without getting NULL pointer dereferences in between. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29lan78xx: Crash in lan78xx_writ_reg (Workqueue: events ↵Raghuram Chary J
lan78xx_deferred_multicast_write) Description: Crash was reported with syzkaller pointing to lan78xx_write_reg routine. Root-cause: Proper cleanup of workqueues and init/setup routines was not happening in failure conditions. Fix: Handled the error conditions by cleaning up the queues and init/setup routines. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-25lan78xx: Set ASD in MAC_CR when EEE is enabled.Raghuram Chary J
Description: EEE does not work with lan7800 when AutoSpeed is not set. (This can happen when EEPROM is not populated or configured incorrectly) Root-Cause: When EEE is enabled, the mac config register ASD is not set i.e. in default state, causing EEE fail. Fix: Set the register when eeprom is not present. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-01lan78xx: remove redundant initialization of pointer 'phydev'Colin Ian King
Pointer phydev is initialized and this value is never read, phydev is immediately updated to a new value, hence this initialization is redundant and can be removed Cleans up clang warning: drivers/net/usb/lan78xx.c:2009:21: warning: Value stored to 'phydev' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16lan78xx: Fix failure in USB Full SpeedYuiko Oshino
Fix initialize the uninitialized tx_qlen to an appropriate value when USB Full Speed is used. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18net: usb: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Philippe Reynes <tremyfr@gmail.com> Cc: Jarod Wilson <jarod@redhat.com> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: "Bjørn Mork" <bjorn@mork.no> Cc: "Stefan Brüns" <stefan.bruens@rwth-aachen.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21lan78xx: Use default values loaded from EEPROM/OTP after resetNisar Sayed
Use default value of auto duplex and auto speed values loaded from EEPROM/OTP after reset. The LAN78xx allows platform configurations to be loaded from EEPROM/OTP. Ex: When external phy is connected, the MAC can be configured to have correct auto speed, auto duplex, auto polarity configured from the EEPROM/OTP. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZENisar Sayed
Allow EEPROM write for less than MAX_EEPROM_SIZE Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21lan78xx: Fix for eeprom read/write when device auto suspendNisar Sayed
Fix for eeprom read/write when device auto suspend Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02lan78xx: Fix to handle hard_header_len updateNisar Sayed
Fix to handle hard_header_len update When ifconfig up/down sequence is initiated hard_header_len get updated incrementally for each ifconfig up /down sequence, this leads invalid hard_header_len, moving to lan78xx_bind to have one time update of hard_header_len addresses the issue. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02lan78xx: USB fast connect/disconnect crash fixNisar Sayed
USB fast connect/disconnect crash fix When USB plugged/unplugged at fast rate, lan78xx_mdio_init() in lan78xx_bind() failing case is not handled. Whenever lan78xx_mdio_init() failed, dev->mdiobus will be freed, however since lan78xx_bind() not consider as error and try to proceed for further initialization in lan78xx_probe() which leads system hung/crash. Also when register_netdev() failed, netdev is freed without calling lan78xx_unbind(). Hence halting the failed cases right manner fixes the system crash/hung issue. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: phy: Make phy_ethtool_ksettings_get return voidyuval.shaia@oracle.com
Make return value void since function never return meaningfull value Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Both conflict were simple overlapping changes. In the kaweth case, Eric Dumazet's skb_cow() bug fix overlapped the conversion of the driver in net-next to use in-netdev stats. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21lan78xx: use skb_cow_head() to deal with cloned skbsEric Dumazet
We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Hughes <james.hughes@raspberrypi.org> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28net: break include loop netdevice.h, dsa.h, devlink.hAndrew Lunn
There is an include loop between netdevice.h, dsa.h, devlink.h because of NETDEV_ALIGN, making it impossible to use devlink structures in dsa.h. Break this loop by taking dsa.h out of netdevice.h, add a forward declaration of dsa_switch_tree and netdev_set_default_ethtool_ops() function, which is what netdevice.h requires. No longer having dsa.h in netdevice.h means the includes in dsa.h no longer get included. This breaks a few other files which depend on these includes. Add these directly in the affected file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22net: lan78xx: update for phy_(read|write)_mmd_indirect() removalRussell King
lan78xx appears to use phylib in a rather weird way, accessing the PHY partly through phylib, and partly by making direct accesses to it, including to the Clause 45 registers. As the indirect MMD accessors are going away, update this driver to use the plain phy_(read|write)_mmd() accessors instead. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10net: lan78xx: fix build errors when linux/phy*.h is removed from net/dsa.hRussell King
drivers/net/usb/lan78xx.c:394:33: sparse: expected ; at end of declaration drivers/net/usb/lan78xx.c:394:33: sparse: Expected } at end of struct-union-enum-specifier drivers/net/usb/lan78xx.c:394:33: sparse: got interface drivers/net/usb/lan78xx.c:403:1: sparse: Expected ; at the end of type declaration drivers/net/usb/lan78xx.c:403:1: sparse: got } Add linux/phy.h to lan78xx.c Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08lan78xx: add LAN7801 MAC only supportWoojung Huh
Add LAN7801 MAC only support with phy fixup functions. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2016-12-05net: usb: set error code when usb_alloc_urb failsPan Bian
In function lan78xx_probe(), variable ret takes the errno code on failures. However, when the call to usb_alloc_urb() fails, its value will keeps 0. 0 indicates success in the context, which is inconsistent with the execution result. This patch fixes the bug, assigning "-ENOMEM" to ret when usb_alloc_urb() returns a NULL pointer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188771 Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18lan78xx: relocate mdix setting to phy driverWoojung Huh
Relocate mdix code to phy driver to be called at config_init(). Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15net: usb: lan78xx: Utilize phy_ethtool_nway_resetFlorian Fainelli
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-02lan78xx: Use irq_domain for phy interrupt from USB Int. EPWoojung Huh
To utilize phylib with interrupt fully than handling some of phy stuff in the MAC driver, create irq_domain for USB interrupt EP of phy interrupt and pass the irq number to phy_connect_direct() instead of PHY_IGNORE_INTERRUPT. Idea comes from drivers/gpio/gpio-dl2.c Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in USB NIC driversJarod Wilson
usbnet: - Remove stale new_mtu <= 0 check in usbnet.c - Set min_mtu = 0, max_mtu = 65535 (sub-drivers must set their own max_mtu and/or min_mtu as needed) r8152: - Set appropriate max_mtu for different variants (1500 or 9194) lan78xx: - Set max_mtu = 9000 asix_driver: - max_mtu = 16384 for ax88178 variant ax88179: - max_mtu = 4088 cdc_ncm: - max_mtu from hardware cdc-phonet: - min_mtu = 6, max_mtu = 65541 sierra_net: - max_mtu = 1500, call usbnet_change_mtu directly - sierra_net_change_mtu checked for MTU > 1500, then called usbnet_change_mtu, but if we set max_mtu to let the network core handle the range check, then we can simply call usbnet_change_mtu directly smsc75xx: - max_mtu = 9000 CC: netdev@vger.kernel.org CC: Woojung Huh <woojung.huh@microchip.com> CC: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> CC: Hayes Wang <hayeswang@realtek.com> CC: Oliver Neukum <oneukum@suse.com> CC: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-12net: usb: lan78xx: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06lan78xx: mark symbols static where possibleBaoyou Xie
We get a few warnings when building kernel with W=1: drivers/net/usb/lan78xx.c:1182:6: warning: no previous prototype for 'lan78xx_defer_kevent' [-Wmissing-prototypes] drivers/net/usb/lan78xx.c:1409:5: warning: no previous prototype for 'lan78xx_nway_reset' [-Wmissing-prototypes] drivers/net/usb/lan78xx.c:2000:5: warning: no previous prototype for 'lan78xx_set_mac_addr' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: usb: lan78xx: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Acked-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28lan78xx: workaround of forced 100 Full/Half duplex mode errorWoojung Huh
At forced 100 Full & Half duplex mode, chip may fail to set mode correctly when cable is switched between long(~50+m) and short one. As workaround, set to 10 before setting to 100 at forced 100 F/H mode. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28lan78xx: fix statistics counter errorWoojung Huh
Fix rx_bytes, tx_bytes and tx_frames error in netdev.stats. - rx_bytes counted bytes excluding size of struct ethhdr. - tx_packets didn't count multiple packets in a single urb - tx_bytes included 8 bytes of extra commands. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20Revert "lan78xx: add ndo_get_stats64"David S. Miller
This reverts commit a59f8c5b048dc938fb958c91c282c865cd845705. There are several bugs in this new code, for example: 1) Uses sleeping locks in get_stats64, which is not allowed, as the operation can be invoked in an atomic context. 2) Uses PM fields without CONFIG_PM or similar guards. 3) Does not synchronize HW stats when the device runtime suspends. Therefore this is being reverted until a correct version is implemented. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18lan78xx: add ndo_get_stats64Woojung Huh
Add lan78xx_get_stats64 of ndo_get_stats64 to report all statistics counters including errors from HW statistics. Read from HW when auto suspend is disabled, use saved counter when auto suspend is enabled because periodic call to ndo_get_stats64 prevents USB auto suspend. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-22 13:32:36 +0000