aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2020-06-17net/mlx5: Disable reload while removing the deviceParav Pandit
[ Upstream commit 60904cd349abc98cb888fc28d1ca55a8e2cf87b3 ] While unregistration is in progress, user might be reloading the interface. This can race with unregistration in below flow which uses the resources which are getting disabled by reload flow. Hence, disable the devlink reloading first when removing the device. CPU0 CPU1 ---- ---- local_pci_remove() devlink_mutex remove_one() devlink_nl_cmd_reload() mlx5_unregister_device() devlink_reload() ops->reload_down() mlx5_unload_one() Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-17net: macb: Only disable NAPI on the actual error pathCharles Keepax
[ Upstream commit 939a5bf7c9b7a1ad9c5d3481c93766a522773531 ] A recent change added a disable to NAPI into macb_open, this was intended to only happen on the error path but accidentally applies to all paths. This causes NAPI to be disabled on the success path, which leads to the network to no longer functioning. Fixes: 014406babc1f ("net: cadence: macb: disable NAPI on error") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-17net: cadence: macb: disable NAPI on errorCorentin Labbe
[ Upstream commit 014406babc1f5f887a08737566b5b356c7018242 ] When the PHY is not working, the macb driver crash on a second try to setup it. [ 78.545994] macb e000b000.ethernet eth0: Could not attach PHY (-19) ifconfig: SIOCSIFFLAGS: No such device [ 78.655457] ------------[ cut here ]------------ [ 78.656014] kernel BUG at /linux-next/include/linux/netdevice.h:521! [ 78.656504] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 78.657079] Modules linked in: [ 78.657795] CPU: 0 PID: 122 Comm: ifconfig Not tainted 5.7.0-next-20200609 #1 [ 78.658202] Hardware name: Xilinx Zynq Platform [ 78.659632] PC is at macb_open+0x220/0x294 [ 78.660160] LR is at 0x0 [ 78.660373] pc : [<c0b0a634>] lr : [<00000000>] psr: 60000013 [ 78.660716] sp : c89ffd70 ip : c8a28800 fp : c199bac0 [ 78.661040] r10: 00000000 r9 : c8838540 r8 : c8838568 [ 78.661362] r7 : 00000001 r6 : c8838000 r5 : c883c000 r4 : 00000000 [ 78.661724] r3 : 00000010 r2 : 00000000 r1 : 00000000 r0 : 00000000 [ 78.662187] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 78.662635] Control: 10c5387d Table: 08b64059 DAC: 00000051 [ 78.663035] Process ifconfig (pid: 122, stack limit = 0x(ptrval)) [ 78.663476] Stack: (0xc89ffd70 to 0xc8a00000) [ 78.664121] fd60: 00000000 c89fe000 c8838000 c89fe000 [ 78.664866] fd80: 00000000 c11ff9ac c8838028 00000000 00000000 c0de6f2c 00000001 c1804eec [ 78.665579] fda0: c19b8178 c8838000 00000000 ca760866 c8838000 00000001 00001043 c89fe000 [ 78.666355] fdc0: 00001002 c0de72f4 c89fe000 c0de8dc0 00008914 c89fe000 c199bac0 ca760866 [ 78.667111] fde0: c89ffddc c8838000 00001002 00000000 c8838138 c881010c 00008914 c0de7364 [ 78.667862] fe00: 00000000 c89ffe70 c89fe000 ffffffff c881010c c0e8bd48 00000003 00000000 [ 78.668601] fe20: c8838000 c8810100 39c1118f 00039c11 c89a0960 00001043 00000000 000a26d0 [ 78.669343] fe40: b6f43000 ca760866 c89a0960 00000051 befe6c50 00008914 c8b2a3c0 befe6c50 [ 78.670086] fe60: 00000003 ee610500 00000000 c0e8ef58 30687465 00000000 00000000 00000000 [ 78.670865] fe80: 00001043 00000000 000a26d0 b6f43000 c89a0600 ee40ae7c c8870d00 c0ddabf4 [ 78.671593] fea0: c89ffeec c0ddabf4 c89ffeec c199bac0 00008913 c0ddac48 c89ffeec c89fe000 [ 78.672324] fec0: befe6c50 ca760866 befe6c50 00008914 c89fe000 befe6c50 c8b2a3c0 c0dc00e4 [ 78.673088] fee0: c89a0480 00000201 00000cc0 30687465 00000000 00000000 00000000 00001002 [ 78.673822] ff00: 00000000 000a26d0 b6f43000 ca760866 00008914 c8b2a3c0 000a0ec4 c8b2a3c0 [ 78.674576] ff20: befe6c50 c04b21bc 000d5004 00000817 c89a0480 c0315f94 00000000 00000003 [ 78.675415] ff40: c19a2bc8 c8a3cc00 c89fe000 00000255 00000000 00000000 00000000 000d5000 [ 78.676182] ff60: 000f6000 c180b2a0 00000817 c0315e64 000d5004 c89fffb0 b6ec0c30 ca760866 [ 78.676928] ff80: 00000000 000b609b befe6c50 000a0ec4 00000036 c03002c4 c89fe000 00000036 [ 78.677673] ffa0: 00000000 c03000c0 000b609b befe6c50 00000003 00008914 befe6c50 000b609b [ 78.678415] ffc0: 000b609b befe6c50 000a0ec4 00000036 befe6e0c befe6f1a 000d5150 00000000 [ 78.679154] ffe0: 000d41e4 befe6bf4 00019648 b6e4509c 20000010 00000003 00000000 00000000 [ 78.681059] [<c0b0a634>] (macb_open) from [<c0de6f2c>] (__dev_open+0xd0/0x154) [ 78.681571] [<c0de6f2c>] (__dev_open) from [<c0de72f4>] (__dev_change_flags+0x16c/0x1c4) [ 78.682015] [<c0de72f4>] (__dev_change_flags) from [<c0de7364>] (dev_change_flags+0x18/0x48) [ 78.682493] [<c0de7364>] (dev_change_flags) from [<c0e8bd48>] (devinet_ioctl+0x5e4/0x75c) [ 78.682945] [<c0e8bd48>] (devinet_ioctl) from [<c0e8ef58>] (inet_ioctl+0x1f0/0x3b4) [ 78.683381] [<c0e8ef58>] (inet_ioctl) from [<c0dc00e4>] (sock_ioctl+0x39c/0x664) [ 78.683818] [<c0dc00e4>] (sock_ioctl) from [<c04b21bc>] (ksys_ioctl+0x2d8/0x9c0) [ 78.684343] [<c04b21bc>] (ksys_ioctl) from [<c03000c0>] (ret_fast_syscall+0x0/0x54) [ 78.684789] Exception stack(0xc89fffa8 to 0xc89ffff0) [ 78.685346] ffa0: 000b609b befe6c50 00000003 00008914 befe6c50 000b609b [ 78.686106] ffc0: 000b609b befe6c50 000a0ec4 00000036 befe6e0c befe6f1a 000d5150 00000000 [ 78.686710] ffe0: 000d41e4 befe6bf4 00019648 b6e4509c [ 78.687582] Code: 9a000003 e5983078 e3130001 1affffef (e7f001f2) [ 78.688788] ---[ end trace e3f2f6ab69754eae ]--- This is due to NAPI left enabled if macb_phylink_connect() fail. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-17net/mlx5e: Fix repeated XSK usage on one channelMaxim Mikityanskiy
[ Upstream commit 36d45fb9d2fdf348d778bfe73f0427db1c6f9bc7 ] After an XSK is closed, the relevant structures in the channel are not zeroed. If an XSK is opened the second time on the same channel without recreating channels, the stray values in the structures will lead to incorrect operation of queues, which causes CQE errors, and the new socket doesn't work at all. This patch fixes the issue by explicitly zeroing XSK-related structs in the channel on XSK close. Note that those structs are zeroed on channel creation, and usually a configuration change (XDP program is set) happens on XSK open, which leads to recreating channels, so typical XSK usecases don't suffer from this issue. However, if XSKs are opened and closed on the same channel without removing the XDP program, this bug reproduces. Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-17net/mlx5: Fix fatal error handling during device loadShay Drory
[ Upstream commit b6e0b6bebe0732d5cac51f0791f269d2413b8980 ] Currently, in case of fatal error during mlx5_load_one(), we cannot enter error state until mlx5_load_one() is finished, what can take several minutes until commands will get timeouts, because these commands can't be processed due to the fatal error. Fix it by setting dev->state as MLX5_DEVICE_STATE_INTERNAL_ERROR before requesting the lock. Fixes: c1d4d2e92ad6 ("net/mlx5: Avoid calling sleeping function by the health poll thread") Signed-off-by: Shay Drory <shayd@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-17net/mlx5: drain health workqueue in case of driver load errorShay Drory
[ Upstream commit 42ea9f1b5c625fad225d4ac96a7e757dd4199d9c ] In case there is a work in the health WQ when we teardown the driver, in driver load error flow, the health work will try to read dev->iseg, which was already unmap in mlx5_pci_close(). Fix it by draining the health workqueue first thing in mlx5_pci_close(). Trace of the error: BUG: unable to handle page fault for address: ffffb5b141c18014 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 1fe95d067 P4D 1fe95d067 PUD 1fe95e067 PMD 1b7823067 PTE 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 6755 Comm: kworker/u128:2 Not tainted 5.2.0-net-next-mlx5-hv_stats-over-last-worked-hyperv #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016 Workqueue: mlx5_healtha050:00:02.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] RIP: 0010:ioread32be+0x30/0x40 Code: 00 77 27 48 81 ff 00 00 01 00 76 07 0f b7 d7 ed 0f c8 c3 55 48 c7 c6 3b ee d5 9f 48 89 e5 e8 67 fc ff ff b8 ff ff ff ff 5d c3 <8b> 07 0f c8 c3 66 66 2e 0f 1f 84 00 00 00 00 00 48 81 fe ff ff 03 RSP: 0018:ffffb5b14c56fd78 EFLAGS: 00010292 RAX: ffffb5b141c18000 RBX: ffff8e9f78a801c0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8e9f7ecd7628 RDI: ffffb5b141c18014 RBP: ffffb5b14c56fd90 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8e9f372a2c30 R11: ffff8e9f87f4bc40 R12: ffff8e9f372a1fc0 R13: ffff8e9f78a80000 R14: ffffffffc07136a0 R15: ffff8e9f78ae6f20 FS: 0000000000000000(0000) GS:ffff8e9f7ecc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffb5b141c18014 CR3: 00000001c8f82006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? mlx5_health_try_recover+0x4d/0x270 [mlx5_core] mlx5_fw_fatal_reporter_recover+0x16/0x20 [mlx5_core] devlink_health_reporter_recover+0x1c/0x50 devlink_health_report+0xfb/0x240 mlx5_fw_fatal_reporter_err_work+0x65/0xd0 [mlx5_core] process_one_work+0x1fb/0x4e0 ? process_one_work+0x16b/0x4e0 worker_thread+0x4f/0x3d0 kthread+0x10d/0x140 ? process_one_work+0x4e0/0x4e0 ? kthread_cancel_delayed_work_sync+0x20/0x20 ret_from_fork+0x1f/0x30 Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 nfs fscache 8021q garp mrp stp llc ipmi_devintf ipmi_msghandler rpcrdma rdma_ucm ib_iser rdma_cm ib_umad iw_cm ib_ipoib libiscsi scsi_transport_iscsi ib_cm mlx5_ib ib_uverbs ib_core mlx5_core sb_edac crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 mlxfw crypto_simd cryptd glue_helper input_leds hyperv_fb intel_rapl_perf joydev serio_raw pci_hyperv pci_hyperv_mini mac_hid hv_balloon nfsd auth_rpcgss nfs_acl lockd grace sunrpc sch_fq_codel ip_tables x_tables autofs4 hv_utils hid_generic hv_storvsc ptp hid_hyperv hid hv_netvsc hyperv_keyboard pps_core scsi_transport_fc psmouse hv_vmbus i2c_piix4 floppy pata_acpi CR2: ffffb5b141c18014 ---[ end trace b12c5503157cad24 ]--- RIP: 0010:ioread32be+0x30/0x40 Code: 00 77 27 48 81 ff 00 00 01 00 76 07 0f b7 d7 ed 0f c8 c3 55 48 c7 c6 3b ee d5 9f 48 89 e5 e8 67 fc ff ff b8 ff ff ff ff 5d c3 <8b> 07 0f c8 c3 66 66 2e 0f 1f 84 00 00 00 00 00 48 81 fe ff ff 03 RSP: 0018:ffffb5b14c56fd78 EFLAGS: 00010292 RAX: ffffb5b141c18000 RBX: ffff8e9f78a801c0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8e9f7ecd7628 RDI: ffffb5b141c18014 RBP: ffffb5b14c56fd90 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8e9f372a2c30 R11: ffff8e9f87f4bc40 R12: ffff8e9f372a1fc0 R13: ffff8e9f78a80000 R14: ffffffffc07136a0 R15: ffff8e9f78ae6f20 FS: 0000000000000000(0000) GS:ffff8e9f7ecc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffb5b141c18014 CR3: 00000001c8f82006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 BUG: sleeping function called from invalid context at ./include/linux/percpu-rwsem.h:38 in_atomic(): 0, irqs_disabled(): 1, pid: 6755, name: kworker/u128:2 INFO: lockdep is turned off. CPU: 3 PID: 6755 Comm: kworker/u128:2 Tainted: G D 5.2.0-net-next-mlx5-hv_stats-over-last-worked-hyperv #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016 Workqueue: mlx5_healtha050:00:02.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] Call Trace: dump_stack+0x63/0x88 ___might_sleep+0x10a/0x130 __might_sleep+0x4a/0x80 exit_signals+0x33/0x230 ? blocking_notifier_call_chain+0x16/0x20 do_exit+0xb1/0xc30 ? kthread+0x10d/0x140 ? process_one_work+0x4e0/0x4e0 Fixes: 52c368dc3da7 ("net/mlx5: Move health and page alloc init to mdev_init") Signed-off-by: Shay Drory <shayd@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-17net: mvneta: do not redirect frames during reconfigurationLorenzo Bianconi
[ Upstream commit 62a502cc91f97e3ffd312d9b42e8d01a137c63ff ] Disable frames injection in mvneta_xdp_xmit routine during hw re-configuration in order to avoid hardware hangs Fixes: b0a43db9087a ("net: mvneta: add XDP_TX support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-17drivers/net/ibmvnic: Update VNIC protocol version reportingThomas Falcon
[ Upstream commit 784688993ebac34dffe44a9f2fabbe126ebfd4db ] VNIC protocol version is reported in big-endian format, but it is not byteswapped before logging. Fix that, and remove version comparison as only one protocol version exists at this time. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-17net: ena: xdp: update napi budget for DROP and ABORTEDSameeh Jubran
[ Upstream commit 3921a81c31df6057183aeb7f7d204003bf699d6f ] This patch fixes two issues with XDP: 1. If the XDP verdict is XDP_ABORTED we break the loop, which results in us handling one buffer per napi cycle instead of the total budget (usually 64). To overcome this simply change the xdp_verdict check to != XDP_PASS. When the verdict is XDP_PASS, the skb is not expected to be NULL. 2. Update the residual budget for XDP_DROP and XDP_ABORTED, since packets are handled in these cases. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-17net: ena: xdp: XDP_TX: fix memory leakSameeh Jubran
[ Upstream commit cd07ecccba13b8bd5023ffe7be57363d07e3105f ] When sending very high packet rate, the XDP tx queues can get full and start dropping packets. In this case we don't free the pages which results in ena driver draining the system memory. Fix: Simply free the pages when necessary. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-17mlxsw: core: Use different get_trend() callbacks for different thermal zonesVadim Pasternak
[ Upstream commit 2dc2f760052da4925482ecdcdc5c94d4a599153c ] The driver registers three different types of thermal zones: For the ASIC itself, for port modules and for gearboxes. Currently, all three types use the same get_trend() callback which does not work correctly for the ASIC thermal zone. The callback assumes that the device data is of type 'struct mlxsw_thermal_module', whereas for the ASIC thermal zone 'struct mlxsw_thermal' is passed as device data. Fix this by using one get_trend() callback for the ASIC thermal zone and another for the other two types. Fixes: 6f73862fabd9 ("mlxsw: core: Add the hottest thermal zone detection") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-10Revert "net/mlx5: Annotate mutex destroy for root ns"Greg Kroah-Hartman
This reverts commit 9b035b08e7e5fe7b2e75636324edf41ee30c5f94 which is commit 9ca415399dae133b00273a4283ef31d003a6818d upstream. It was backported incorrectly, Paul writes at: https://lore.kernel.org/r/20200607203425.GD23662@windriver.com I happened to notice this commit: 9ca415399dae - "net/mlx5: Annotate mutex destroy for root ns" ...was backported to 4.19 and 5.4 and v5.6 in linux-stable. It patches del_sw_root_ns() - which only exists after v5.7-rc7 from: 6eb7a268a99b - "net/mlx5: Don't maintain a case of del_sw_func being null" which creates the one line del_sw_root_ns stub function around kfree(node) by breaking it out of tree_put_node(). In the absense of del_sw_root_ns - the backport finds an identical one line kfree stub fcn - named del_sw_prio from this earlier commit: 139ed6c6c46a - "net/mlx5: Fix steering memory leak" [in v4.15-rc5] and then puts the mutex_destroy() into that (wrong) function, instead of putting it into tree_put_node where the root ns case used to be hand Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Roi Dayan <roid@mellanox.com> Cc: Mark Bloch <markb@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-10net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()Pablo Neira Ayuso
[ Upstream commit a683012a8e77675a1947cc8f11f97cdc1d5bb769 ] The drivers reports EINVAL to userspace through netlink on invalid meta match. This is confusing since EINVAL is usually reserved for malformed netlink messages. Replace it by more meaningful codes. Fixes: 6d65bc64e232 ("net/mlx5e: Add mlx5e_flower_parse_meta support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-10nfp: flower: fix used time of merge flow statisticsHeinrich Kuhn
[ Upstream commit 5b186cd60f033110960a3db424ffbd6de4cee528 ] Prior to this change the correct value for the used counter is calculated but not stored nor, therefore, propagated to user-space. In use-cases such as OVS use-case at least this results in active flows being removed from the hardware datapath. Which results in both unnecessary flow tear-down and setup, and packet processing on the host. This patch addresses the problem by saving the calculated used value which allows the value to propagate to user-space. Found by inspection. Fixes: aa6ce2ea0c93 ("nfp: flower: support stats update for merge flows") Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-10net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10aFugang Duan
[ Upstream commit f2fb6b6275eba9d312957ca44c487bd780da6169 ] For rx filter 'HWTSTAMP_FILTER_PTP_V2_EVENT', it should be PTP v2/802.AS1, any layer, any kind of event packet, but HW only take timestamp snapshot for below PTP message: sync, Pdelay_req, Pdelay_resp. Then it causes below issue when test E2E case: ptp4l[2479.534]: port 1: received DELAY_REQ without timestamp ptp4l[2481.423]: port 1: received DELAY_REQ without timestamp ptp4l[2481.758]: port 1: received DELAY_REQ without timestamp ptp4l[2483.524]: port 1: received DELAY_REQ without timestamp ptp4l[2484.233]: port 1: received DELAY_REQ without timestamp ptp4l[2485.750]: port 1: received DELAY_REQ without timestamp ptp4l[2486.888]: port 1: received DELAY_REQ without timestamp ptp4l[2487.265]: port 1: received DELAY_REQ without timestamp ptp4l[2487.316]: port 1: received DELAY_REQ without timestamp Timestamp snapshot dependency on register bits in received path: SNAPTYPSEL TSMSTRENA TSEVNTENA PTP_Messages 01 x 0 SYNC, Follow_Up, Delay_Req, Delay_Resp, Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up 01 0 1 SYNC, Pdelay_Req, Pdelay_Resp For dwmac v5.10a, enabling all events by setting register DWC_EQOS_TIME_STAMPING[SNAPTYPSEL] to 2’b01, clearing bit [TSEVNTENA] to 0’b0, which can support all required events. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-10net/mlx5: Fix crash upon suspend/resumeMark Bloch
[ Upstream commit 8fc3e29be9248048f449793502c15af329f35c6e ] Currently a Linux system with the mlx5 NIC always crashes upon hibernation - suspend/resume. Add basic callbacks so the NIC could be suspended and resumed. Fixes: 9603b61de1ee ("mlx5: Move pci device handling from mlx5_ib to mlx5_core") Tested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-07net: smsc911x: Fix runtime PM imbalance on errorDinghao Liu
[ Upstream commit 539d39ad0c61b35f69565a037d7586deaf6d6166 ] Remove runtime PM usage counter decrement when the increment function has not been called to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-07net: Fix return value about devm_platform_ioremap_resource()Tiezhu Yang
[ Upstream commit ef24d6c3d6965158dfe23ae961d87e9a343e18a2 ] When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-07net: ethernet: stmmac: Enable interface clocks on probe for IPQ806xJonathan McDowell
[ Upstream commit a96ac8a0045e3cbe3e5af6d1b3c78c6c2065dec5 ] The ipq806x_gmac_probe() function enables the PTP clock but not the appropriate interface clocks. This means that if the bootloader hasn't done so attempting to bring up the interface will fail with an error like: [ 59.028131] ipq806x-gmac-dwmac 37600000.ethernet: Failed to reset the dma [ 59.028196] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed [ 59.034056] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_open: Hw setup failed This patch, a slightly cleaned up version of one posted by Sergey Sergeev in: https://forum.openwrt.org/t/support-for-mikrotik-rb3011uias-rm/4064/257 correctly enables the clock; we have already configured the source just before this. Tested on a MikroTik RB3011. Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-07net/ethernet/freescale: rework quiesce/activate for ucc_gethValentin Longchamp
[ Upstream commit 79dde73cf9bcf1dd317a2667f78b758e9fe139ed ] ugeth_quiesce/activate are used to halt the controller when there is a link change that requires to reconfigure the mac. The previous implementation called netif_device_detach(). This however causes the initial activation of the netdevice to fail precisely because it's detached. For details, see [1]. A possible workaround was the revert of commit net: linkwatch: add check for netdevice being present to linkwatch_do_dev However, the check introduced in the above commit is correct and shall be kept. The netif_device_detach() is thus replaced with netif_tx_stop_all_queues() that prevents any tranmission. This allows to perform mac config change required by the link change, without detaching the corresponding netdevice and thus not preventing its initial activation. [1] https://lists.openwall.net/netdev/2020/01/08/201 Signed-off-by: Valentin Longchamp <valentin@longchamp.me> Acked-by: Matteo Ghidoni <matteo.ghidoni@ch.abb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-07net: ethernet: ti: fix some return value check of cpsw_ale_create()Wei Yongjun
[ Upstream commit 3469660d1b15ccfdf7b33295c306b6298ca730aa ] cpsw_ale_create() can return both NULL and PTR_ERR(), but all of the caller only check NULL for error handling. This patch convert it to only return PTR_ERR() in all error cases, and the caller using IS_ERR() instead of NULL test. Fixes: 4b41d3436796 ("net: ethernet: ti: cpsw: allow untagged traffic on host port") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-07net: bmac: Fix read of MAC address from ROMJeremy Kerr
[ Upstream commit ef01cee2ee1b369c57a936166483d40942bcc3e3 ] In bmac_get_station_address, We're reading two bytes at a time from ROM, but we do that six times, resulting in 12 bytes of read & writes. This means we will write off the end of the six-byte destination buffer. This change fixes the for-loop to only read/write six bytes. Based on a proposed fix from Finn Thain <fthain@telegraphics.com.au>. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Reported-by: Stan Johnson <userm57@yahoo.com> Tested-by: Stan Johnson <userm57@yahoo.com> Reported-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03qlcnic: fix missing release in qlcnic_83xx_interrupt_test.Qiushi Wu
commit 15c973858903009e995b2037683de29dfe968621 upstream. In function qlcnic_83xx_interrupt_test(), function qlcnic_83xx_diag_alloc_res() is not handled by function qlcnic_83xx_diag_free_res() after a call of the function qlcnic_alloc_mbx_args() failed. Fix this issue by adding a jump target "fail_mbx_args", and jump to this new target when qlcnic_alloc_mbx_args() failed. Fixes: b6b4316c8b2f ("qlcnic: Handle qlcnic_alloc_mbx_args() failure") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03bnxt_en: fix firmware message length endiannessEdwin Peer
commit 2a5a8800fa915bd9bc272c91ca64728e6aa84c0a upstream. The explicit mask and shift is not the appropriate way to parse fields out of a little endian struct. The length field is internally __le16 and the strategy employed only happens to work on little endian machines because the offset used is actually incorrect (length is at offset 6). Also remove the related and no longer used definitions from bnxt.h. Fixes: 845adfe40c2a ("bnxt_en: Improve valid bit checking in firmware response message.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03bnxt_en: Fix accumulation of bp->net_stats_prev.Michael Chan
commit b8056e8434b037fdab08158fea99ed7bc8ef3a74 upstream. We have logic to maintain network counters across resets by storing the counters in bp->net_stats_prev before reset. But not all resets will clear the counters. Certain resets that don't need to change the number of rings do not clear the counters. The current logic accumulates the counters before all resets, causing big jumps in the counters after some resets, such as ethtool -G. Fix it by only accumulating the counters during reset if the irq_re_init parameter is set. The parameter signifies that all rings and interrupts will be reset and that means that the counters will also be reset. Reported-by: Vijayendra Suman <vijayendra.suman@oracle.com> Fixes: b8875ca356f1 ("bnxt_en: Save ring statistics before reset.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net: freescale: select CONFIG_FIXED_PHY where neededArnd Bergmann
[ Upstream commit 99352c79af3e5f2e4724abf37fa5a2a3299b1c81 ] I ran into a randconfig build failure with CONFIG_FIXED_PHY=m and CONFIG_GIANFAR=y: x86_64-linux-ld: drivers/net/ethernet/freescale/gianfar.o:(.rodata+0x418): undefined reference to `fixed_phy_change_carrier' It seems the same thing can happen with dpaa and ucc_geth, so change all three to do an explicit 'select FIXED_PHY'. The fixed-phy driver actually has an alternative stub function that theoretically allows building network drivers when fixed-phy is disabled, but I don't see how that would help here, as the drivers presumably would not work then. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03net: microchip: encx24j600: add missed kthread_stopChuhong Yuan
[ Upstream commit ff8ce319e9c25e920d994cc35236f0bb32dfc8f3 ] This driver calls kthread_run() in probe, but forgets to call kthread_stop() in probe failure and remove. Add the missed kthread_stop() to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03net: mscc: ocelot: fix address ageing time (again)Vladimir Oltean
commit bf655ba212dfd10d1c86afeee3f3372dbd731d46 upstream. ocelot_set_ageing_time has 2 callers: - felix_set_ageing_time: from drivers/net/dsa/ocelot/felix.c - ocelot_port_attr_ageing_set: from drivers/net/ethernet/mscc/ocelot.c The issue described in the fixed commit below actually happened for the felix_set_ageing_time code path only, since ocelot_port_attr_ageing_set was already dividing by 1000. So to make both paths symmetrical (and to fix addresses getting aged way too fast on Ocelot), stop dividing by 1000 at caller side altogether. Fixes: c0d7eccbc761 ("net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03mlxsw: spectrum: Fix use-after-free of split/unsplit/type_set in case reload ↵Jiri Pirko
fails commit 4340f42f207eacb81e7a6b6bb1e3b6afad9a2e26 upstream. In case of reload fail, the mlxsw_sp->ports contains a pointer to a freed memory (either by reload_down() or reload_up() error path). Fix this by initializing the pointer to NULL and checking it before dereferencing in split/unsplit/type_set callpaths. Fixes: 24cc68ad6c46 ("mlxsw: core: Add support for reload") Reported-by: Danielle Ratson <danieller@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net: sgi: ioc3-eth: Fix return value check in ioc3eth_probe()Tang Bin
commit a7654211d0ffeaa8eb0545ea00f8445242cbce05 upstream. In the function devm_platform_ioremap_resource(), if get resource failed, the return value is ERR_PTR() not NULL. Thus it must be replaced by IS_ERR(), or else it may result in crashes if a critical error path is encountered. Fixes: 0ce5ebd24d25 ("mfd: ioc3: Add driver for SGI IOC3 chip") Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net/mlx4_core: fix a memory leak bug.Qiushi Wu
commit febfd9d3c7f74063e8e630b15413ca91b567f963 upstream. In function mlx4_opreq_action(), pointer "mailbox" is not released, when mlx4_cmd_box() return and error, causing a memory leak bug. Fix this issue by going to "out" label, mlx4_free_cmd_mailbox() can free this pointer. Fixes: fe6f700d6cbb ("net/mlx4_core: Respond to operation request by firmware") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net: sun: fix missing release regions in cas_init_one().Qiushi Wu
commit 5a730153984dd13f82ffae93d7170d76eba204e9 upstream. In cas_init_one(), "pdev" is requested by "pci_request_regions", but it was not released after a call of the function “pci_write_config_byte” failed. Thus replace the jump target “err_write_cacheline” by "err_out_free_res". Fixes: 1f26dac32057 ("[NET]: Add Sun Cassini driver.") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net/mlx5: Annotate mutex destroy for root nsRoi Dayan
commit 9ca415399dae133b00273a4283ef31d003a6818d upstream. Invoke mutex_destroy() to catch any errors. Fixes: 2cc43b494a6c ("net/mlx5_core: Managing root flow table") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net/mlx5: Avoid processing commands before cmdif is readyEran Ben Elisha
commit f7936ddd35d8b849daf0372770c7c9dbe7910fca upstream. When driver is reloading during recovery flow, it can't get new commands till command interface is up again. Otherwise we may get to null pointer trying to access non initialized command structures. Add cmdif state to avoid processing commands while cmdif is not ready. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net/mlx5: Fix cleaning unmanaged flow tablesRoi Dayan
[ Upstream commit aee37f3d940ca732df71c3df49347bccaafc0b24 ] Unmanaged flow tables doesn't have a parent and tree_put_node() assume there is always a parent if cleaning is needed. fix that. Fixes: 5281a0c90919 ("net/mlx5: fs_core: Introduce unmanaged flow tables") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net/mlx5: Fix a race when moving command interface to events modeEran Ben Elisha
[ Upstream commit d43b7007dbd1195a5b6b83213e49b1516aaf6f5e ] After driver creates (via FW command) an EQ for commands, the driver will be informed on new commands completion by EQE. However, due to a race in driver's internal command mode metadata update, some new commands will still be miss-handled by driver as if we are in polling mode. Such commands can get two non forced completion, leading to already freed command entry access. CREATE_EQ command, that maps EQ to the command queue must be posted to the command queue while it is empty and no other command should be posted. Add SW mechanism that once the CREATE_EQ command is about to be executed, all other commands will return error without being sent to the FW. Allow sending other commands only after successfully changing the driver's internal command mode metadata. We can safely return error to all other commands while creating the command EQ, as all other commands might be sent from the user/application during driver load. Application can rerun them later after driver's load was finished. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03r8169: fix OCP access on RTL8117Heiner Kallweit
[ Upstream commit 561535b0f23961ced071b82575d5e83e6351a814 ] According to r8168 vendor driver DASHv3 chips like RTL8168fp/RTL8117 need a special addressing for OCP access. Fix is compile-tested only due to missing test hardware. Fixes: 1287723aa139 ("r8169: add support for RTL8117") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net/mlx5: Fix error flow in case of function_setup failureShay Drory
[ Upstream commit 4f7400d5cbaef676e00cdffb0565bf731c6bb09e ] Currently, if an error occurred during mlx5_function_setup(), we keep dev->state as DEVICE_STATE_UP. Fixing it by adding a goto label. Fixes: e161105e58da ("net/mlx5: Function setup/teardown procedures") Signed-off-by: Shay Drory <shayd@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net/mlx5e: Update netdev txq on completions during closureMoshe Shemesh
[ Upstream commit 5e911e2c06bd8c17df29147a5e2d4b17fafda024 ] On sq closure when we free its descriptors, we should also update netdev txq on completions which would not arrive. Otherwise if we reopen sqs and attach them back, for example on fw fatal recovery flow, we may get tx timeout. Fixes: 29429f3300a3 ("net/mlx5e: Timeout if SQ doesn't flush during close") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net/mlx5: Fix memory leak in mlx5_events_initMoshe Shemesh
[ Upstream commit df14ad1eccb04a4a28c90389214dbacab085b244 ] Fix memory leak in mlx5_events_init(), in case create_single_thread_workqueue() fails, events struct should be freed. Fixes: 5d3c537f9070 ("net/mlx5: Handle event of power detection in the PCIE slot") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net/mlx5e: Fix inner tirs handlingRoi Dayan
[ Upstream commit a16b8e0dcf7043bee46174bed0553cc9e36b63a5 ] In the cited commit inner_tirs argument was added to create and destroy inner tirs, and no indication was added to mlx5e_modify_tirs_hash() function. In order to have a consistent handling, use inner_indir_tir[0].tirn in tirs destroy/modify function as an indication to whether inner tirs are created. Inner tirs are not created for representors and before this commit, a call to mlx5e_modify_tirs_hash() was sending HW commands to modify non-existent inner tirs. Fixes: 46dc933cee82 ("net/mlx5e: Provide explicit directive if to create inner indirect tirs") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net/mlx5e: kTLS, Destroy key object after destroying the TISTariq Toukan
[ Upstream commit 16736e11f43b80a38f98f6add54fab3b8c297df3 ] The TLS TIS object contains the dek/key ID. By destroying the key first, the TIS would contain an invalid non-existing key ID. Reverse the destroy order, this also acheives the desired assymetry between the destroy and the create flows. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net: mvpp2: fix RX hashing for non-10G portsRussell King
[ Upstream commit 3138a07ce219acde4c0d7ea0b6d54ba64153328b ] When rxhash is enabled on any ethernet port except the first in each CP block, traffic flow is prevented. The analysis is below: I've been investigating this afternoon, and what I've found, comparing a kernel without 895586d5dc32 and with 895586d5dc32 applied is: - The table programmed into the hardware via mvpp22_rss_fill_table() appears to be identical with or without the commit. - When rxhash is enabled on eth2, mvpp2_rss_port_c2_enable() reports that c2.attr[0] and c2.attr[2] are written back containing: - with 895586d5dc32, failing: 00200000 40000000 - without 895586d5dc32, working: 04000000 40000000 - When disabling rxhash, c2.attr[0] and c2.attr[2] are written back as: 04000000 00000000 The second value represents the MVPP22_CLS_C2_ATTR2_RSS_EN bit, the first value is the queue number, which comprises two fields. The high 5 bits are 24:29 and the low three are 21:23 inclusive. This comes from: c2.attr[0] = MVPP22_CLS_C2_ATTR0_QHIGH(qh) | MVPP22_CLS_C2_ATTR0_QLOW(ql); So, the working case gives eth2 a queue id of 4.0, or 32 as per port->first_rxq, and the non-working case a queue id of 0.1, or 1. The allocation of queue IDs seems to be in mvpp2_port_probe(): if (priv->hw_version == MVPP21) port->first_rxq = port->id * port->nrxqs; else port->first_rxq = port->id * priv->max_port_rxqs; Where: if (priv->hw_version == MVPP21) priv->max_port_rxqs = 8; else priv->max_port_rxqs = 32; Making the port 0 (eth0 / eth1) have port->first_rxq = 0, and port 1 (eth2) be 32. It seems the idea is that the first 32 queues belong to port 0, the second 32 queues belong to port 1, etc. mvpp2_rss_port_c2_enable() gets the queue number from it's parameter, 'ctx', which comes from mvpp22_rss_ctx(port, 0). This returns port->rss_ctx[0]. mvpp22_rss_context_create() is responsible for allocating that, which it does by looking for an unallocated priv->rss_tables[] pointer. This table is shared amongst all ports on the CP silicon. When we write the tables in mvpp22_rss_fill_table(), the RSS table entry is defined by: u32 sel = MVPP22_RSS_INDEX_TABLE(rss_ctx) | MVPP22_RSS_INDEX_TABLE_ENTRY(i); where rss_ctx is the context ID (queue number) and i is the index in the table. If we look at what is written: - The first table to be written has "sel" values of 00000000..0000001f, containing values 0..3. This appears to be for eth1. This is table 0, RX queue number 0. - The second table has "sel" values of 00000100..0000011f, and appears to be for eth2. These contain values 0x20..0x23. This is table 1, RX queue number 0. - The third table has "sel" values of 00000200..0000021f, and appears to be for eth3. These contain values 0x40..0x43. This is table 2, RX queue number 0. How do queue numbers translate to the RSS table? There is another table - the RXQ2RSS table, indexed by the MVPP22_RSS_INDEX_QUEUE field of MVPP22_RSS_INDEX and accessed through the MVPP22_RXQ2RSS_TABLE register. Before 895586d5dc32, it was: mvpp2_write(priv, MVPP22_RSS_INDEX, MVPP22_RSS_INDEX_QUEUE(port->first_rxq)); mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE, MVPP22_RSS_TABLE_POINTER(port->id)); and after: mvpp2_write(priv, MVPP22_RSS_INDEX, MVPP22_RSS_INDEX_QUEUE(ctx)); mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE, MVPP22_RSS_TABLE_POINTER(ctx)); Before the commit, for eth2, that would've contained '32' for the index and '1' for the table pointer - mapping queue 32 to table 1. Remember that this is queue-high.queue-low of 4.0. After the commit, we appear to map queue 1 to table 1. That again looks fine on the face of it. Section 9.3.1 of the A8040 manual seems indicate the reason that the queue number is separated. queue-low seems to always come from the classifier, whereas queue-high can be from the ingress physical port number or the classifier depending on the MVPP2_CLS_SWFWD_PCTRL_REG. We set the port bit in MVPP2_CLS_SWFWD_PCTRL_REG, meaning that queue-high comes from the MVPP2_CLS_SWFWD_P2HQ_REG() register... and this seems to be where our bug comes from. mvpp2_cls_oversize_rxq_set() sets this up as: mvpp2_write(port->priv, MVPP2_CLS_SWFWD_P2HQ_REG(port->id), (port->first_rxq >> MVPP2_CLS_OVERSIZE_RXQ_LOW_BITS)); val = mvpp2_read(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG); val |= MVPP2_CLS_SWFWD_PCTRL_MASK(port->id); mvpp2_write(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG, val); Setting the MVPP2_CLS_SWFWD_PCTRL_MASK bit means that the queue-high for eth2 is _always_ 4, so only queues 32 through 39 inclusive are available to eth2. Yet, we're trying to tell the classifier to set queue-high, which will be ignored, to zero. Hence, the queue-high field (MVPP22_CLS_C2_ATTR0_QHIGH()) from the classifier will be ignored. This means we end up directing traffic from eth2 not to queue 1, but to queue 33, and then we tell it to look up queue 33 in the RSS table. However, RSS table has not been programmed for queue 33, and so it ends up (presumably) dropping the packets. It seems that mvpp22_rss_context_create() doesn't take account of the fact that the upper 5 bits of the queue ID can't actually be changed due to the settings in mvpp2_cls_oversize_rxq_set(), _or_ it seems that mvpp2_cls_oversize_rxq_set() has been missed in this commit. Either way, these two functions mutually disagree with what queue number should be used. Looking deeper into what mvpp2_cls_oversize_rxq_set() and the MTU validation is doing, it seems that MVPP2_CLS_SWFWD_P2HQ_REG() is used for over-sized packets attempting to egress through this port. With the classifier having had RSS enabled and directing eth2 traffic to queue 1, we may still have packets appearing on queue 32 for this port. However, the only way we may end up with over-sized packets attempting to egress through eth2 - is if the A8040 forwards frames between its ports. From what I can see, we don't support that feature, and the kernel restricts the egress packet size to the MTU. In any case, if we were to attempt to transmit an oversized packet, we have no support in the kernel to deal with that appearing in the port's receive queue. So, this patch attempts to solve the issue by clearing the MVPP2_CLS_SWFWD_PCTRL_MASK() bit, allowing MVPP22_CLS_C2_ATTR0_QHIGH() from the classifier to define the queue-high field of the queue number. My testing seems to confirm my findings above - clearing this bit means that if I enable rxhash on eth2, the interface can then pass traffic, as we are now directing traffic to RX queue 1 rather than queue 33. Traffic still seems to work with rxhash off as well. Reported-by: Matteo Croce <mcroce@redhat.com> Tested-by: Matteo Croce <mcroce@redhat.com> Fixes: 895586d5dc32 ("net: mvpp2: cls: Use RSS contexts to handle RSS tables") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net/mlx5: Add command entry handling completionMoshe Shemesh
[ Upstream commit 17d00e839d3b592da9659c1977d45f85b77f986a ] When FW response to commands is very slow and all command entries in use are waiting for completion we can have a race where commands can get timeout before they get out of the queue and handled. Timeout completion on uninitialized command will cause releasing command's buffers before accessing it for initialization and then we will get NULL pointer exception while trying access it. It may also cause releasing buffers of another command since we may have timeout completion before even allocating entry index for this command. Add entry handling completion to avoid this race. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspendGrygorii Strashko
[ Upstream commit 4c64b83d03f4aafcdf710caad994cbc855802e74 ] vlan_for_each() are required to be called with rtnl_lock taken, otherwise ASSERT_RTNL() warning will be triggered - which happens now during System resume from suspend: cpsw_suspend() |- cpsw_ndo_stop() |- __hw_addr_ref_unsync_dev() |- cpsw_purge_all_mc() |- vlan_for_each() |- ASSERT_RTNL(); Hence, fix it by surrounding cpsw_ndo_stop() by rtnl_lock/unlock() calls. Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03dpaa_eth: fix usage as DSA master, try 3Vladimir Oltean
[ Upstream commit 5d14c304bfc14b4fd052dc83d5224376b48f52f0 ] The dpaa-eth driver probes on compatible string for the MAC node, and the fman/mac.c driver allocates a dpaa-ethernet platform device that triggers the probing of the dpaa-eth net device driver. All of this is fine, but the problem is that the struct device of the dpaa_eth net_device is 2 parents away from the MAC which can be referenced via of_node. So of_find_net_device_by_node can't find it, and DSA switches won't be able to probe on top of FMan ports. It would be a bit silly to modify a core function (of_find_net_device_by_node) to look for dev->parent->parent->of_node just for one driver. We're just 1 step away from implementing full recursion. Actually there have already been at least 2 previous attempts to make this work: - Commit a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node") - One or more of the patches in "[v3,0/6] adapt DPAA drivers for DSA": https://patchwork.ozlabs.org/project/netdev/cover/1508178970-28945-1-git-send-email-madalin.bucur@nxp.com/ (I couldn't really figure out which one was supposed to solve the problem and how). Point being, it looks like this is still pretty much a problem today. On T1040, the /sys/class/net/eth0 symlink currently points to ../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/dpaa-ethernet.0/net/eth0 which pretty much illustrates the problem. The closest of_node we've got is the "fsl,fman-memac" at /soc@ffe000000/fman@400000/ethernet@e6000, which is what we'd like to be able to reference from DSA as host port. For of_find_net_device_by_node to find the eth0 port, we would need the parent of the eth0 net_device to not be the "dpaa-ethernet" platform device, but to point 1 level higher, aka the "fsl,fman-memac" node directly. The new sysfs path would look like this: ../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/net/eth0 And this is exactly what SET_NETDEV_DEV does. It sets the parent of the net_device. The new parent has an of_node associated with it, and of_dev_node_match already checks for the of_node of the device or of its parent. Fixes: a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node") Fixes: c6e26ea8c893 ("dpaa_eth: change device used") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27stmmac: fix pointer check after utilization in stmmac_interruptMaxim Petrov
[ Upstream commit f42234ffd531ca6b13d9da02faa60b72eccf8334 ] The paranoidal pointer check in IRQ handler looks very strange - it really protects us only against bogus drivers which request IRQ line with null pointer dev_id. However, the code fragment is incorrect because the dev pointer is used before the actual check which leads to undefined behavior. Remove the check to avoid confusing people with incorrect code. Signed-off-by: Maxim Petrov <mmrmaximuzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27ibmvnic: Skip fatal error reset after passive initJuliet Kim
[ Upstream commit f9c6cea0b38518741c8dcf26ac056d26ee2fd61d ] During MTU change, the following events may happen. Client-driven CRQ initialization fails due to partner’s CRQ closed, causing client to enqueue a reset task for FATAL_ERROR. Then passive (server-driven) CRQ initialization succeeds, causing client to release CRQ and enqueue a reset task for failover. If the passive CRQ initialization occurs before the FATAL reset task is processed, the FATAL error reset task would try to access a CRQ message queue that was freed, causing an oops. The problem may be most likely to occur during DLPAR add vNIC with a non-default MTU, because the DLPAR process will automatically issue a change MTU request. Fix this by not processing fatal error reset if CRQ is passively initialized after client-driven CRQ initialization fails. Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27net/ena: Fix build warning in ena_xdp_set()Gavin Shan
[ Upstream commit caec66198d137c26f0d234abc498866a58c64150 ] This fixes the following build warning in ena_xdp_set(), which is observed on aarch64 with 64KB page size. In file included from ./include/net/inet_sock.h:19, from ./include/net/ip.h:27, from drivers/net/ethernet/amazon/ena/ena_netdev.c:46: drivers/net/ethernet/amazon/ena/ena_netdev.c: In function \ ‘ena_xdp_set’: \ drivers/net/ethernet/amazon/ena/ena_netdev.c:557:6: warning: \ format ‘%lu’ \ expects argument of type ‘long unsigned int’, but argument 4 \ has type ‘int’ \ [-Wformat=] "Failed to set xdp program, the current MTU (%d) is \ larger than the maximum allowed MTU (%lu) while xdp is on", Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27aquantia: Fix the media type of AQC100 ethernet controller in the driverRichard Clark
[ Upstream commit 6de556c31061e3b9c36546ffaaac5fdb679a2f14 ] The Aquantia AQC100 controller enables a SFP+ port, so the driver should configure the media type as '_TYPE_FIBRE' instead of '_TYPE_TP'. Signed-off-by: Richard Clark <richard.xnu.clark@gmail.com> Cc: Igor Russkikh <irusskikh@marvell.com> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-07-01 12:13:01 +0000