aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/ti
AgeCommit message (Collapse)Author
2021-11-26net: davinci_emac: Fix interrupt pacing disableMaxim Kiselev
[ Upstream commit d52bcb47bdf971a59a2467975d2405fcfcb2fa19 ] This patch allows to use 0 for `coal->rx_coalesce_usecs` param to disable rx irq coalescing. Previously we could enable rx irq coalescing via ethtool (For ex: `ethtool -C eth0 rx-usecs 2000`) but we couldn't disable it because this part rejects 0 value: if (!coal->rx_coalesce_usecs) return -EINVAL; Fixes: 84da2658a619 ("TI DaVinci EMAC : Implement interrupt pacing functionality.") Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20211101152343.4193233-1-bigunclemax@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28net: ti: fix UAF in tlan_remove_onePavel Skripkin
commit 0336f8ffece62f882ab3012820965a786a983f70 upstream. priv is netdev private data and it cannot be used after free_netdev() call. Using priv after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. Fixes: 1e0a8b13d355 ("tlan: cancel work at remove path") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03drivers/net/ethernet: clean up unused assignmentsJesse Brandeburg
commit 7c8c0291f84027558bd5fca5729cbcf288c510f4 upstream. As part of the W=1 compliation series, these lines all created warnings about unused variables that were assigned a value. Most of them are from register reads, but some are just picking up a return value from a function and never doing anything with it. Fixed warnings: .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:512:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:2110:21: warning: variable ‘config0’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1327:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1358:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/media.c:322:8: warning: variable ‘setup’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/de4x5.c:4928:13: warning: variable ‘r3’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:4981:6: warning: variable ‘rx_status’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6510:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6087: warning: cannot understand function prototype: 'struct hw_regs ' .../ethernet/microchip/lan743x_main.c:161:6: warning: variable ‘int_en’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:1702:6: warning: variable ‘int_sts’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:3041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] .../ethernet/marvell/mvneta.c:754:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:33:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:160:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:490:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:2378:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] .../ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/mellanox/mlx4/en_tx.c:858:6: warning: variable ‘ring_cons’ set but not used [-Wunused-but-set-variable] .../ethernet/sis/sis900.c:792:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:878:11: warning: variable ‘rx_ev_pkt_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:23: warning: variable ‘rx_ev_mcast_pkt’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:7: warning: variable ‘rx_ev_hdr_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:876:7: warning: variable ‘rx_ev_other_err’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:1646:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:2535:32: warning: variable ‘spec’ set but not used [-Wunused-but-set-variable] .../ethernet/via/via-velocity.c:880:6: warning: variable ‘curr_status’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/tlan.c:656:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/davinci_emac.c:1230:6: warning: variable ‘num_tx_pkts’ set but not used [-Wunused-but-set-variable] .../ethernet/synopsys/dwc-xlgmac-common.c:516:8: warning: variable ‘str’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/cpsw_new.c:1662:22: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable] The register reads should be OK, because the current implementation of readl and friends will always execute even without an lvalue. When it makes sense, just remove the lvalue assignment and the local. Other times, just remove the offending code, and occasionally, just mark the variable as maybe unused since it could be used in an ifdef or debug scenario. Only compile tested with W=1. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> [fixes gcc-11 build warnings - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03net: netcp: Fix an error messageChristophe JAILLET
[ Upstream commit ddb6e00f8413e885ff826e32521cff7924661de0 ] 'ret' is known to be 0 here. The expected error code is stored in 'tx_pipe->dma_queue', so use it instead. While at it, switch from %d to %pe which is more user friendly. Fixes: 84640e27f230 ("net: netcp: Add Keystone NetCP core ethernet driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22net: davinci_emac: Fix incorrect masking of tx and rx error channelColin Ian King
[ Upstream commit d83b8aa5207d81f9f6daec9888390f079cc5db3f ] The bit-masks used for the TXERRCH and RXERRCH (tx and rx error channels) are incorrect and always lead to a zero result. The mask values are currently the incorrect post-right shifted values, fix this by setting them to the currect values. (I double checked these against the TMS320TCI6482 data sheet, section 5.30, page 127 to ensure I had the correct mask values for the TXERRCH and RXERRCH fields in the MACSTATUS register). Addresses-Coverity: ("Operands don't affect result") Fixes: a6286ee630f6 ("net: Add TI DaVinci EMAC driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-12net: ethernet: ti: cpts: fix ethtool output when no ptp_clock registeredGrygorii Strashko
[ Upstream commit 4614792eebcbf81c60ad3604c1aeeb2b0899cea4 ] The CPTS driver registers PTP PHC clock when first netif is going up and unregister it when all netif are down. Now ethtool will show: - PTP PHC clock index 0 after boot until first netif is up; - the last assigned PTP PHC clock index even if PTP PHC clock is not registered any more after all netifs are down. This patch ensures that -1 is returned by ethtool when PTP PHC clock is not registered any more. Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201224162405.28032-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31net: ethernet: ti: ale: clean ale tbl on init and intf restartGrygorii Strashko
[ Upstream commit 7fe579dfb90fcdf0c7722f33c772d5f0d1bc7cb6 ] Clean CPSW ALE on init and intf restart (up/down) to avoid reading obsolete or garbage entries from ALE table. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-21net: ethernet: ti: cpsw: fix extra rx interruptGrygorii Strashko
[ Upstream commit 51302f77bedab8768b761ed1899c08f89af9e4e2 ] Now RX interrupt is triggered twice every time, because in cpsw_rx_interrupt() it is asked first and then disabled. So there will be pending interrupt always, when RX interrupt is enabled again in NAPI handler. Fix it by first disabling IRQ and then do ask. Fixes: 870915feabdc ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-13net: ethernet: ti: cpts: correct debug for expired txq skbIvan Khoronzhuk
[ Upstream commit d0e14c4d9bcef0d4aa1057d2959adaa6f18d4a17 ] The msgtype and seqid that is smth that belongs to event for comparison but not for staled txq skb. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05net: (cpts) fix a missing check of clk_prepareKangjie Lu
[ Upstream commit 2d822f2dbab7f4c820f72eb8570aacf3f35855bd ] clk_prepare() could fail, so let's check its status, and if it fails, return its error code upstream. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-01net: ethernet: ti: cpsw: unsync mcast entries while switch promisc modeIvan Khoronzhuk
[ Upstream commit 9737cc99dd14b5b8b9d267618a6061feade8ea68 ] After flushing all mcast entries from the table, the ones contained in mc list of ndev are not restored when promisc mode is toggled off, because they are considered as synched with ALE, thus, in order to restore them after promisc mode - reset syncing info. This fix touches only switch mode devices, including single port boards like Beagle Bone. Fixes: commit 5da1948969bc ("net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update") Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-11net: ethernet: ti: cpsw_ethtool: fix ethtool ring param setIvan Khoronzhuk
[ Upstream commit 09faf5a7d7c0bcb07faba072f611937af9dd5788 ] Fix ability to set RX descriptor number, the reason - initially "tx_max_pending" was set incorrectly, but the issue appears after adding sanity check, so fix is for "sanity" patch. Fixes: 37e2d99b59c476 ("ethtool: Ensure new ring parameters are within bounds during SRINGPARAM") Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-04net: ethernet: ti: fix possible object reference leakWen Yang
[ Upstream commit 75eac7b5f68b0a0671e795ac636457ee27cc11d8 ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ti/netcp_ethss.c:3661:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. ./drivers/net/ethernet/ti/netcp_ethss.c:3665:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
2018-09-17net: ethernet: ti: add missing GENERIC_ALLOCATOR dependencyCorentin Labbe
This patch mades TI_DAVINCI_CPDMA select GENERIC_ALLOCATOR. without that, the following sparc64 build failure happen drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_check_free_tx_desc': (.text+0x278): undefined reference to `gen_pool_avail' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_chan_submit': (.text+0x340): undefined reference to `gen_pool_alloc' (.text+0x5c4): undefined reference to `gen_pool_free' drivers/net/ethernet/ti/davinci_cpdma.o: In function `__cpdma_chan_free': davinci_cpdma.c:(.text+0x64c): undefined reference to `gen_pool_free' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_desc_pool_destroy.isra.6': davinci_cpdma.c:(.text+0x17ac): undefined reference to `gen_pool_size' davinci_cpdma.c:(.text+0x17b8): undefined reference to `gen_pool_avail' davinci_cpdma.c:(.text+0x1824): undefined reference to `gen_pool_size' davinci_cpdma.c:(.text+0x1830): undefined reference to `gen_pool_avail' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_ctlr_create': (.text+0x19f8): undefined reference to `devm_gen_pool_create' (.text+0x1a90): undefined reference to `gen_pool_add_virt' Makefile:1011: recipe for target 'vmlinux' failed Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: ethernet: cpsw-phy-sel: prefer phandle for phy selTony Lindgren
The cpsw-phy-sel device is not a child of the cpsw interconnect target module. It lives in the system control module. Let's fix this issue by trying to use cpsw-phy-sel phandle first if it exists and if not fall back to current usage of trying to find the cpsw-phy-sel child. That way the phy sel driver can be a child of the system control module where it belongs in the device tree. Without this fix, we cannot have a proper interconnect target module hierarchy in device tree for things like genpd. Note that deferred probe is mostly not supported by cpsw and this patch does not attempt to fix that. In case deferred probe support is needed, this could be added to cpsw_slave_open() and phy_connect() so they start handling and returning errors. For documenting it, looks like the cpsw-phy-sel is used for all cpsw device tree nodes. It's missing the related binding documentation, so let's also update the binding documentation accordingly. Cc: devicetree@vger.kernel.org Cc: Andrew Lunn <andrew@lunn.ch> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2018-08-11net: ethernet: ti: cpsw: fix runtime_pm while add/kill vlanIvan Khoronzhuk
It's exclusive with normal behaviour but if try to set vlan to one of the reserved values is made, the cpsw runtime pm is broken. Fixes: a6c5d14f5136 ("drivers: net: cpsw: ndev: fix accessing to suspended device") Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11net: ethernet: ti: cpsw: clear all entries when delete vidIvan Khoronzhuk
In cases if some of the entries were not found in forwarding table while killing vlan, the rest not needed entries still left in the table. No need to stop, as entry was deleted anyway. So fix this by returning error only after all was cleaned. To implement this, return -ENOENT in cpsw_ale_del_mcast() as it's supposed to be. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07net: ethernet: ti: cpts: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114813 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07net: tlan: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 141440 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01net: ethernet: ti: cpsw: replace unnecessarily macroses on functionsIvan Khoronzhuk
Replace ugly macroses on functions. Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29net: ethernet: ti: cpsw: add missed RX_CTAG feature for second slaveIvan Khoronzhuk
Seems it was missed while adding for first net dev in dual-emac mode. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: ethernet: ti: cpsw: restore shaper configuration while down/upIvan Khoronzhuk
Need to restore shapers configuration after interface was down/up. This is needed as appropriate configuration is still replicated in kernel settings. This only shapers context restore, so vlan configuration should be restored by user if needed, especially for devices with one port where vlan frames are sent via ALE. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: ethernet: ti: cpsw: add CBS Qdisc offloadIvan Khoronzhuk
The cpsw has up to 4 FIFOs per port and upper 3 FIFOs can feed rate limited queue with shaping. In order to set and enable shaping for those 3 FIFOs queues the network device with CBS qdisc attached is needed. The CBS configuration is added for dual-emac/single port mode only, but potentially can be used in switch mode also, based on switchdev for instance. Despite the FIFO shapers can work w/o cpdma level shapers the base usage must be in combine with cpdma level shapers as described in TRM, that are set as maximum rates for interface queues with sysfs. One of the possible configuration with txq shapers and CBS shapers: Configured with echo RATE > /sys/class/net/eth0/queues/tx-0/tx_maxrate /--------------------------------------------------- / / cpdma level shapers +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----+ | c7 | | c6 | | c5 | | c4 | | c3 | | c2 | | c1 | | c0 | \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ / \/ \/ \/ \/ \/ \/ \/ \/ +---------|------|------|------|-------------------------------------+ | +----+ | | +---+ | | | +----+ | | | | v v v v | | +----+ +----+ +----+ +----+ p p+----+ +----+ +----+ +----+ | | | | | | | | | | o o| | | | | | | | | | | f3 | | f2 | | f1 | | f0 | r CPSW r| f3 | | f2 | | f1 | | f0 | | | | | | | | | | | t t| | | | | | | | | | \ / \ / \ / \ / 0 1\ / \ / \ / \ / | | \ X \ / \ / \ / \ / \ / \ / \ / | | \/ \ \/ \/ \/ \/ \/ \/ \/ | +-------\------------------------------------------------------------+ \ \ FIFO shaper, set with CBS offload added in this patch, \ FIFO0 cannot be rate limited ------------------------------------------------------ CBS shaper configuration is supposed to be used with root MQPRIO Qdisc offload allowing to add sk_prio->tc->txq maps that direct traffic to appropriate tx queue and maps L2 priority to FIFO shaper. The CBS shaper is intended to be used for AVB where L2 priority (pcp field) is used to differentiate class of traffic. So additionally vlan needs to be created with appropriate egress sk_prio->l2 prio map. If CBS has several tx queues assigned to it, the sum of their bandwidth has not overlap bandwidth set for CBS. It's recomended the CBS bandwidth to be a little bit more. The CBS shaper is configured with CBS qdisc offload interface using tc tool from iproute2 packet. For instance: $ tc qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 1 $ tc -g class show dev eth0 +---(100:ffe2) mqprio |    +---(100:3) mqprio |    +---(100:4) mqprio |     +---(100:ffe1) mqprio |    +---(100:2) mqprio |     +---(100:ffe0) mqprio     +---(100:1) mqprio $ tc qdisc add dev eth0 parent 100:1 cbs locredit -1440 \ hicredit 60 sendslope -960000 idleslope 40000 offload 1 $ tc qdisc add dev eth0 parent 100:2 cbs locredit -1470 \ hicredit 62 sendslope -980000 idleslope 20000 offload 1 The above code set CBS shapers for tc0 and tc1, for that txq0 and txq1 is used. Pay attention, the real set bandwidth can differ a bit due to discreteness of configuration parameters. Here parameters like locredit, hicredit and sendslope are ignored internally and are supposed to be set with assumption that maximum frame size for frame - 1500. It's supposed that interface speed is not changed while reconnection, not always is true, so inform user in case speed of interface was changed, as it can impact on dependent shapers configuration. For more examples see Documentation. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: ethernet: ti: cpsw: add MQPRIO Qdisc offloadIvan Khoronzhuk
That's possible to offload vlan to tc priority mapping with assumption sk_prio == L2 prio. Example: $ ethtool -L eth0 rx 1 tx 4 $ qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 1 $ tc -g class show dev eth0 +---(100:ffe2) mqprio |    +---(100:3) mqprio |    +---(100:4) mqprio |     +---(100:ffe1) mqprio |    +---(100:2) mqprio |     +---(100:ffe0) mqprio     +---(100:1) mqprio Here, 100:1 is txq0, 100:2 is txq1, 100:3 is txq2, 100:4 is txq3 txq0 belongs to tc0, txq1 to tc1, txq2 and txq3 to tc2 The offload part only maps L2 prio to classes of traffic, but not to transmit queues, so to direct traffic to traffic class vlan has to be created with appropriate egress map. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: ethernet: ti: cpdma: fit rated channels in backward orderIvan Khoronzhuk
According to TRM tx rated channels should be in 7..0 order, so correct it. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: ethernet: ti: cpsw: use cpdma channels in backward order for txqIvan Khoronzhuk
The cpdma channel highest priority is from hi to lo number. The driver has limited number of descriptors that are shared between number of cpdma channels. Number of queues can be tuned with ethtool, that allows to not spend descriptors on not needed cpdma channels. In AVB usually only 2 tx queues can be enough with rate limitation. The rate limitation can be used only for hi priority queues. Thus, to use only 2 queues the 8 has to be created. It's wasteful. So, in order to allow using only needed number of rate limited tx queues, save resources, and be able to set rate limitation for them, let assign tx cpdma channels in backward order to queues. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12net: ethernet: ti: cpts: break cycle once late ts is matchedIvan Khoronzhuk
The late ts queue can contain a bunch of skbs while hi rate testing, no need to check all of them if timestamp is already matched. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-09net: Add generic ndo_select_queue functionsAlexander Duyck
This patch adds a generic version of the ndo_select_queue functions for either returning 0 or selecting a queue based on the processor ID. This is generally meant to just reduce the number of functions we have to change in the future when we have to deal with ndo_select_queue changes. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-07-07net: ethernet: ti: cpsw: allow PTP 224.0.0.107 to be timestampedIvan Khoronzhuk
Tested on AM572x with cpsw v1.15 for PTP sync and delay_req messages. It doesn't work on cpsw v1.12, so added only for cpsw v > 1.15. Command for testing: ptp4l -P -4 -H -i eth0 -l 6 -m -q -p /dev/ptp0 -f ptp.cfg where ptp.cfg: [global] tx_timestamp_timeout 20 Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: ethernet: ti: cpsw: use BIT macroIvan Khoronzhuk
It's needed to avoid checkpatch warnings for farther changes. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-23net: drivers/net: Convert random_ether_addr to eth_random_addrJoe Perches
random_ether_addr is a #define for eth_random_addr which is generally preferred in kernel code by ~3:1 Convert the uses of random_ether_addr to enable removing the #define Miscellanea: o Convert &vfmac[0] to equivalent vfmac and avoid unnecessary line wrap Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22net: ethernet: ti: davinci_cpdma: make function cpdma_desc_pool_create staticColin Ian King
The function cpdma_desc_pool_create is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'cpdma_desc_pool_create' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-21net: davinci_emac: match the mdio device against its compatible if possibleBartosz Golaszewski
Device tree based systems without of_dev_auxdata will have the mdio device named differently than "davinci_mdio(.0)". In this case use the device's parent's compatible string for matching Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-20net: ethernet: fix suspend/resume in davinci_emacBartosz Golaszewski
This patch reverts commit 3243ff2a05ec ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching") and adds a comment which should stop anyone from reintroducing the same "fix" in the future. We can't use bus_find_device_by_name() here because the device name is not guaranteed to be 'davinci_mdio'. On some systems it can be 'davinci_mdio.0' so we need to use strncmp() against the first part of the string to correctly match it. Fixes: 3243ff2a05ec ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-03net: netcp: ethss: remove unnecessary pointer set to NULLYueHaibing
If statement has make sure the 'slave->phy' is NULL Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Filling in the padding slot in the bpf structure as a bug fix in 'ne' overlapped with actually using that padding area for something in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net: ethernet: davinci_emac: fix error handling in probe()Dan Carpenter
The current error handling code has an issue where it does: if (priv->txchan) cpdma_chan_destroy(priv->txchan); The problem is that ->txchan is either valid or an error pointer (which would lead to an Oops). I've changed it to use multiple error labels so that the test can be removed. Also there were some missing calls to netif_napi_del(). Fixes: 3ef0fdb2342c ("net: davinci_emac: switch to new cpdma layer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net: ti: cpsw: include gpio/consumer.hArnd Bergmann
On platforms that don't always enable CONFIG_GPIOLIB, we run into a build failure: drivers/net/ethernet/ti/cpsw.c: In function 'cpsw_probe': drivers/net/ethernet/ti/cpsw.c:3006:9: error: implicit declaration of function 'devm_gpiod_get_array_optional' [-Werror=implicit-function-declaration] mode = devm_gpiod_get_array_optional(&pdev->dev, "mode", GPIOD_OUT_LOW); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/ti/cpsw.c:3006:59: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'? mode = devm_gpiod_get_array_optional(&pdev->dev, "mode", GPIOD_OUT_LOW); Since we cannot rely on this to be visible from gpio.h, we have to include gpio/consumer.h directly. Fixes: 2652113ff043 ("net: ethernet: ti: Allow most drivers with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30net: davinci: fix building davinci mdio code without CONFIG_OFArnd Bergmann
Test-building this driver on targets without CONFIG_OF revealed a build failure: drivers/net/ethernet/ti/davinci_mdio.c: In function 'davinci_mdio_probe': drivers/net/ethernet/ti/davinci_mdio.c:380:9: error: implicit declaration of function 'davinci_mdio_probe_dt'; did you mean 'davinci_mdio_probe'? [-Werror=implicit-function-declaration] This adjusts the #ifdef logic in the driver to make it build in all configurations. Fixes: 2652113ff043 ("net: ethernet: ti: Allow most drivers with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21ti: ethernet: davinci: Fix cast to int warningsFlorian Fainelli
Now that we can compile test this driver on 64-bit hosts, we get some warnings about how a pointer/address is written/read to/from a register (sw_token). Fix this by doing the appropriate conversions, we cannot possibly have the driver work on 64-bit hosts the way the tokens are managed though, since the registers being written to a 32-bit only. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21net: ethernet: davinci_emac: Fix printing of base addressFlorian Fainelli
Use %pa which is the correct formatter to print a physical address, instead of %p which is just a pointer. Fixes: a6286ee630f6 ("net: Add TI DaVinci EMAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21net: ethernet: ti: cpsw: Fix cpsw_add_ch_strings() printk formatFlorian Fainelli
When building on a 64-bit host we will get the following warning: drivers/net/ethernet/ti/cpsw.c: In function 'cpsw_add_ch_strings': drivers/net/ethernet/ti/cpsw.c:1284:19: warning: format '%d' expects argument of type 'int', but argument 5 has type 'long unsigned int' [-Wformat=] "%s DMA chan %d: %s", rx_dir ? "Rx" : "Tx", ~^ %ld Fix this by using an %ld format and casting to long. Fixes: e05107e6b747 ("net: ethernet: ti: cpsw: add multi queue support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21net: ethernet: ti: cpts: Fix timestamp printFlorian Fainelli
On 64-bit hosts we will get the following warning: drivers/net/ethernet/ti/cpts.c: In function 'cpts_overflow_check': drivers/net/ethernet/ti/cpts.c:297:11: warning: format '%lld' expects argument of type 'long long int', but argument 3 has type '__kernel_time_t {aka long int}' [-Wformat=] pr_debug("cpts overflow check at %lld.%09lu\n", ts.tv_sec, ts.tv_nsec); Fix this by using an appropriate casting that works on all bit sizes. Fixes: a5c79c26e168 ("ptp: cpts: convert to the 64 bit get/set time methods.") Fixes: 87c0e764d43a ("cpts: introduce time stamping code and a PTP hardware clock.") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21ti: ethernet: cpdma: Use correct format for genpool_*Florian Fainelli
Now that we can compile davinci_cpdma.c on 64-bit hosts, we can see that the format used for printing a size_t type is incorrect, use %zd accordingly. Fixes: aeec3021043b ("net: ethernet: ti: cpdma: remove used_desc counter") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17net: ethernet: ti: Allow most drivers with COMPILE_TESTFlorian Fainelli
Most of the TI drivers build just fine with COMPILE_TEST, cpmac (AR7) is the exception because it uses a header file from arch/mips/include/asm/mach-ar7/ar7.h and keystone netcp which requires help from drivers/soc/ti/ for queue management helpers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17net: ethernet: ti: cpsw: disable mq feature for "AM33xx ES1.0" devicesIvan Khoronzhuk
The early versions of am33xx devices, related to ES1.0 SoC revision have errata limiting mq support. That's the same errata as commit 7da1160002f1 ("drivers: net: cpsw: add am335x errata workarround for interrutps") AM33xx Errata [1] Advisory 1.0.9 http://www.ti.com/lit/er/sprz360f/sprz360f.pdf After additional investigation were found that drivers w/a is propagated on all AM33xx SoCs and on DM814x. But the errata exists only for ES1.0 of AM33xx family, limiting mq support for revisions after ES1.0. So, disable mq support only for related SoCs and use separate polls for revisions allowing mq. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16drivers: net: Remove device_node checks with of_mdiobus_register()Florian Fainelli
A number of drivers have the following pattern: if (np) of_mdiobus_register() else mdiobus_register() which the implementation of of_mdiobus_register() now takes care of. Remove that pattern in drivers that strictly adhere to it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Reviewed-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16net: ethernet: ti: cpsw-phy-sel: check bus_find_device() ret valueGrygorii Strashko
This fixes klockworks warnings: Pointer 'dev' returned from call to function 'bus_find_device' at line 179 may be NULL and will be dereferenced at line 181. cpsw-phy-sel.c:179: 'dev' is assigned the return value from function 'bus_find_device'. bus.c:342: 'bus_find_device' explicitly returns a NULL value. cpsw-phy-sel.c:181: 'dev' is dereferenced by passing argument 1 to function 'dev_get_drvdata'. device.h:1024: 'dev' is passed to function 'dev_get_drvdata'. device.h:1026: 'dev' is explicitly dereferenced. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> [nsekhar@ti.com: add an error message, fix return path] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-02 05:18:47 +0000