aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/qlogic
AgeCommit message (Collapse)Author
2024-01-15net/qla3xxx: fix potential memleak in ql_alloc_buffer_queuesDinghao Liu
[ Upstream commit 89f45c30172c80e55c887f32f1af8e184124577b ] When dma_alloc_coherent() fails, we should free qdev->lrg_buf to prevent potential memleak. Fixes: 1357bfcf7106 ("qla3xxx: Dynamically size the rx buffer queue based on the MTU.") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20231227070227.10527-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-15net/qla3xxx: switch from 'pci_' to 'dma_' APIChristophe JAILLET
[ Upstream commit 41fb4c1ba7478fe34c7e094e124e4ee4513b9763 ] The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'ql_alloc_net_req_rsp_queues()' GFP_KERNEL can be used because it is only called from 'ql_alloc_mem_resources()' which already calls 'ql_alloc_buffer_queues()' which uses GFP_KERNEL. (see below) When memory is allocated in 'ql_alloc_buffer_queues()' GFP_KERNEL can be used because this flag is already used just a few line above. When memory is allocated in 'ql_alloc_small_buffers()' GFP_KERNEL can be used because it is only called from 'ql_alloc_mem_resources()' which already calls 'ql_alloc_buffer_queues()' which uses GFP_KERNEL. (see above) When memory is allocated in 'ql_alloc_mem_resources()' GFP_KERNEL can be used because this function already calls 'ql_alloc_buffer_queues()' which uses GFP_KERNEL. (see above) While at it, use 'dma_set_mask_and_coherent()' instead of 'dma_set_mask()/ dma_set_coherent_mask()' in order to slightly simplify code. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20210117081542.560021-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 89f45c30172c ("net/qla3xxx: fix potential memleak in ql_alloc_buffer_queues") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20qed: Fix a potential use-after-free in qed_cxt_tables_allocDinghao Liu
[ Upstream commit b65d52ac9c085c0c52dee012a210d4e2f352611b ] qed_ilt_shadow_alloc() will call qed_ilt_shadow_free() to free p_hwfn->p_cxt_mngr->ilt_shadow on error. However, qed_cxt_tables_alloc() accesses the freed pointer on failure of qed_ilt_shadow_alloc() through calling qed_cxt_mngr_free(), which may lead to use-after-free. Fix this issue by setting p_mngr->ilt_shadow to NULL in qed_ilt_shadow_free(). Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20231210045255.21383-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25qed: fix LL2 RX buffer allocationManish Chopra
commit 2f3389c73832ad90b63208c0fc281ad080114c7a upstream. Driver allocates the LL2 rx buffers from kmalloc() area to construct the skb using slab_build_skb() The required size allocation seems to have overlooked for accounting both skb_shared_info size and device placement padding bytes which results into the below panic when doing skb_put() for a standard MTU sized frame. skbuff: skb_over_panic: text:ffffffffc0b0225f len:1514 put:1514 head:ff3dabceaf39c000 data:ff3dabceaf39c042 tail:0x62c end:0x566 dev:<NULL> … skb_panic+0x48/0x4a skb_put.cold+0x10/0x10 qed_ll2b_complete_rx_packet+0x14f/0x260 [qed] qed_ll2_rxq_handle_completion.constprop.0+0x169/0x200 [qed] qed_ll2_rxq_completion+0xba/0x320 [qed] qed_int_sp_dpc+0x1a7/0x1e0 [qed] This patch fixes this by accouting skb_shared_info and device placement padding size bytes when allocating the buffers. Cc: David S. Miller <davem@davemloft.net> Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-10qed/red_ll2: Fix undefined behavior bug in struct qed_ll2_infoGustavo A. R. Silva
commit eea03d18af9c44235865a4bc9bec4d780ef6cf21 upstream. The flexible structure (a structure that contains a flexible-array member at the end) `qed_ll2_tx_packet` is nested within the second layer of `struct qed_ll2_info`: struct qed_ll2_tx_packet { ... /* Flexible Array of bds_set determined by max_bds_per_packet */ struct { struct core_tx_bd *txq_bd; dma_addr_t tx_frag; u16 frag_len; } bds_set[]; }; struct qed_ll2_tx_queue { ... struct qed_ll2_tx_packet cur_completing_packet; }; struct qed_ll2_info { ... struct qed_ll2_tx_queue tx_queue; struct qed_ll2_cbs cbs; }; The problem is that member `cbs` in `struct qed_ll2_info` is placed just after an object of type `struct qed_ll2_tx_queue`, which is in itself an implicit flexible structure, which by definition ends in a flexible array member, in this case `bds_set`. This causes an undefined behavior bug at run-time when dynamic memory is allocated for `bds_set`, which could lead to a serious issue if `cbs` in `struct qed_ll2_info` is overwritten by the contents of `bds_set`. Notice that the type of `cbs` is a structure full of function pointers (and a cookie :) ): include/linux/qed/qed_ll2_if.h: 107 typedef 108 void (*qed_ll2_complete_rx_packet_cb)(void *cxt, 109 struct qed_ll2_comp_rx_data *data); 110 111 typedef 112 void (*qed_ll2_release_rx_packet_cb)(void *cxt, 113 u8 connection_handle, 114 void *cookie, 115 dma_addr_t rx_buf_addr, 116 bool b_last_packet); 117 118 typedef 119 void (*qed_ll2_complete_tx_packet_cb)(void *cxt, 120 u8 connection_handle, 121 void *cookie, 122 dma_addr_t first_frag_addr, 123 bool b_last_fragment, 124 bool b_last_packet); 125 126 typedef 127 void (*qed_ll2_release_tx_packet_cb)(void *cxt, 128 u8 connection_handle, 129 void *cookie, 130 dma_addr_t first_frag_addr, 131 bool b_last_fragment, bool b_last_packet); 132 133 typedef 134 void (*qed_ll2_slowpath_cb)(void *cxt, u8 connection_handle, 135 u32 opaque_data_0, u32 opaque_data_1); 136 137 struct qed_ll2_cbs { 138 qed_ll2_complete_rx_packet_cb rx_comp_cb; 139 qed_ll2_release_rx_packet_cb rx_release_cb; 140 qed_ll2_complete_tx_packet_cb tx_comp_cb; 141 qed_ll2_release_tx_packet_cb tx_release_cb; 142 qed_ll2_slowpath_cb slowpath_cb; 143 void *cookie; 144 }; Fix this by moving the declaration of `cbs` to the middle of its containing structure `qed_ll2_info`, preventing it from being overwritten by the contents of `bds_set` at run-time. This bug was introduced in 2017, when `bds_set` was converted to a one-element array, and started to be used as a Variable Length Object (VLO) at run-time. Fixes: f5823fe6897c ("qed: Add ll2 option to limit the number of bds per packet") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/ZQ+Nz8DfPg56pIzr@work Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-09treewide: Remove uninitialized_var() usageKees Cook
commit 3f649ab728cda8038259d8f14492fe400fbab911 upstream. Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20qlcnic: check pci_reset_function resultDenis Plotnikov
[ Upstream commit 7573099e10ca69c3be33995c1fcd0d241226816d ] Static code analyzer complains to unchecked return value. The result of pci_reset_function() is unchecked. Despite, the issue is on the FLR supported code path and in that case reset can be done with pcie_flr(), the patch uses less invasive approach by adding the result check of pci_reset_function(). Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism") Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-05qed/qed_sriov: guard against NULL derefs from qed_iov_get_vf_infoDaniil Tatianin
[ Upstream commit 25143b6a01d0cc5319edd3de22ffa2578b045550 ] We have to make sure that the info returned by the helper is valid before using it. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: f990c82c385b ("qed*: Add support for ndo_set_vf_trust") Fixes: 733def6a04bf ("qed*: IOV link control") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22qed/qed_dev: guard against a possible division by zeroDaniil Tatianin
[ Upstream commit 1a9dc5610ef89d807acdcfbff93a558f341a44da ] Previously we would divide total_left_rate by zero if num_vports happened to be 1 because non_requested_count is calculated as num_vports - req_count. Guard against this by validating num_vports at the beginning and returning an error otherwise. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: bcd197c81f63 ("qed: Add vport WFQ configuration APIs") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230309201556.191392-1-d-tatianin@yandex-team.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18qlcnic: prevent ->dcb use-after-free on qlcnic_dcb_enable() failureDaniil Tatianin
[ Upstream commit 13a7c8964afcd8ca43c0b6001ebb0127baa95362 ] adapter->dcb would get silently freed inside qlcnic_dcb_enable() in case qlcnic_dcb_attach() would return an error, which always happens under OOM conditions. This would lead to use-after-free because both of the existing callers invoke qlcnic_dcb_get_info() on the obtained pointer, which is potentially freed at that point. Propagate errors from qlcnic_dcb_enable(), and instead free the dcb pointer at callsite using qlcnic_dcb_free(). This also removes the now unused qlcnic_clear_dcb_ops() helper, which was a simple wrapper around kfree() also causing memory leaks for partially initialized dcb. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: 3c44bba1d270 ("qlcnic: Disable DCB operations from SR-IOV VFs") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()Yuan Can
[ Upstream commit 01de1123322e4fe1bbd0fcdf0982511b55519c03 ] If vp alloc failed in qlcnic_sriov_init(), all previously allocated vp needs to be freed. Fixes: f197a7aa6288 ("qlcnic: VF-PF communication channel implementation") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08qlcnic: fix sleep-in-atomic-context bugs caused by msleepDuoming Zhou
[ Upstream commit 8dbd6e4ce1b9c527921643d9e34f188a10d4e893 ] The watchdog timer is used to monitor whether the process of transmitting data is timeout. If we use qlcnic driver, the dev_watchdog() that is the timer handler of watchdog timer will call qlcnic_tx_timeout() to process the timeout. But the qlcnic_tx_timeout() calls msleep(), as a result, the sleep-in-atomic-context bugs will happen. The processes are shown below: (atomic context) dev_watchdog qlcnic_tx_timeout qlcnic_83xx_idc_request_reset qlcnic_83xx_lock_driver msleep --------------------------- (atomic context) dev_watchdog qlcnic_tx_timeout qlcnic_83xx_idc_request_reset qlcnic_83xx_lock_driver qlcnic_83xx_recover_driver_lock msleep Fix by changing msleep() to mdelay(), the mdelay() is busy-waiting and the bugs could be mitigated. Fixes: 629263acaea3 ("qlcnic: 83xx CNA inter driver communication mechanism") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08net/qla3xxx: fix potential memleak in ql3xxx_send()Zhang Changzhong
[ Upstream commit 62a7311fb96c61d281da9852dbee4712fc8c3277 ] The ql3xxx_send() returns NETDEV_TX_OK without freeing skb in error handling case, add dev_kfree_skb_any() to fix it. Fixes: bd36b0ac5d06 ("qla3xxx: Add support for Qlogic 4032 chip.") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1668675039-21138-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25net/qla3xxx: Fix a test in ql_reset_work()Christophe JAILLET
[ Upstream commit 5361448e45fac6fb96738df748229432a62d78b6 ] test_bit() tests if one bit is set or not. Here the logic seems to check of bit QL_RESET_PER_SCSI (i.e. 4) OR bit QL_RESET_START (i.e. 3) is set. In fact, it checks if bit 7 (4 | 3 = 7) is set, that is to say QL_ADAPTER_UP. This looks harmless, because this bit is likely be set, and when the ql_reset_work() delayed work is scheduled in ql3xxx_isr() (the only place that schedule this work), QL_RESET_START or QL_RESET_PER_SCSI is set. This has been spotted by smatch. Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/80e73e33f390001d9c0140ffa9baddf6466a41a2.1652637337.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15qede: confirm skb is allocated before usingJamie Bainbridge
[ Upstream commit 4e910dbe36508654a896d5735b318c0b88172570 ] qede_build_skb() assumes build_skb() always works and goes straight to skb_reserve(). However, build_skb() can fail under memory pressure. This results in a kernel panic because the skb to reserve is NULL. Add a check in case build_skb() failed to allocate and return NULL. The NULL return is handled correctly in callers to qede_build_skb(). Fixes: 8a8633978b842 ("qede: Add build_skb() support.") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15qlcnic: dcb: default to returning -EOPNOTSUPPTom Rix
[ Upstream commit 1521db37f0d42334a88e8ff28198a27d1ed5cd7b ] Clang static analysis reports this issue qlcnic_dcb.c:382:10: warning: Assigned value is garbage or undefined mbx_out = *val; ^ ~~~~ val is set in the qlcnic_dcb_query_hw_capability() wrapper. If there is no query_hw_capability op in dcp, success is returned without setting the val. For this and similar wrappers, return -EOPNOTSUPP. Fixes: 14d385b99059 ("qlcnic: dcb: Query adapter DCB capabilities.") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15qed: validate and restrict untrusted VFs vlan promisc modeManish Chopra
commit cbcc44db2cf7b836896733acc0e5ea966136ed22 upstream. Today when VFs are put in promiscuous mode, they can request PF to configure device for them to receive all VLANs traffic regardless of what vlan is configured by the PF (via ip link) and PF allows this config request regardless of whether VF is trusted or not. From security POV, when VLAN is configured for VF through PF (via ip link), honour such config requests from VF only when they are configured to be trusted, otherwise restrict such VFs vlan promisc mode config. Cc: stable@vger.kernel.org Fixes: f990c82c385b ("qed*: Add support for ndo_set_vf_trust") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15qed: display VF trust configManish Chopra
commit 4e6e6bec7440b9b76f312f28b1f4e944eebb3abc upstream. Driver does support SR-IOV VFs trust configuration but it does not display it when queried via ip link utility. Cc: stable@vger.kernel.org Fixes: f990c82c385b ("qed*: Add support for ndo_set_vf_trust") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16qed: return status of qed_iov_get_linkTom Rix
[ Upstream commit d9dc0c84ad2d4cc911ba252c973d1bf18d5eb9cf ] Clang static analysis reports this issue qed_sriov.c:4727:19: warning: Assigned value is garbage or undefined ivi->max_tx_rate = tx_rate ? tx_rate : link.speed; ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ link is only sometimes set by the call to qed_iov_get_link() qed_iov_get_link fails without setting link or returning status. So change the decl to return status. Fixes: 73390ac9d82b ("qed*: support ndo_get_vf_config") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16net: qlogic: check the return value of dma_alloc_coherent() in ↵Jia-Ju Bai
qed_vf_hw_prepare() [ Upstream commit e0058f0fa80f6e09c4d363779c241c45a3c56b94 ] The function dma_alloc_coherent() in qed_vf_hw_prepare() can fail, so its return value should be checked. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29qlcnic: potential dereference null pointer of rx_queue->page_ringJiasheng Jiang
[ Upstream commit 60ec7fcfe76892a1479afab51ff17a4281923156 ] The return value of kcalloc() needs to be checked. To avoid dereference of null pointer in case of the failure of alloc. Therefore, it might be better to change the return type of qlcnic_sriov_alloc_vlans() and return -ENOMEM when alloc fails and return 0 the others. Also, qlcnic_sriov_set_guest_vlan_mode() and __qlcnic_pci_sriov_enable() should deal with the return value of qlcnic_sriov_alloc_vlans(). Fixes: 154d0c810c53 ("qlcnic: VLAN enhancement for 84XX adapters") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-14net/qla3xxx: fix an error code in ql_adapter_up()Dan Carpenter
commit d17b9737c2bc09b4ac6caf469826e5a7ce3ffab7 upstream. The ql_wait_for_drvr_lock() fails and returns false, then this function should return an error code instead of returning success. The other problem is that the success path prints an error message netdev_err(ndev, "Releasing driver lock\n"); Delete that and re-order the code a little to make it more clear. Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211207082416.GA16110@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14qede: validate non LSO skb lengthManish Chopra
commit 8e227b198a55859bf790dc7f4b1e30c0859c6756 upstream. Although it is unlikely that stack could transmit a non LSO skb with length > MTU, however in some cases or environment such occurrences actually resulted into firmware asserts due to packet length being greater than the max supported by the device (~9700B). This patch adds the safeguard for such odd cases to avoid firmware asserts. v2: Added "Fixes" tag with one of the initial driver commit which enabled the TX traffic actually (as this was probably day1 issue which was discovered recently by some customer environment) Fixes: a2ec6172d29c ("qede: Add support for link") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20211203174413.13090-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()Zhou Qingyang
commit e2dabc4f7e7b60299c20a36d6a7b24ed9bf8e572 upstream. In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20qed: Fix missing error code in qed_slowpath_start()chongjiapeng
commit a5a14ea7b4e55604acb0dc9d88fdb4cb6945bc77 upstream. The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'rc'. Eliminate the follow smatch warning: drivers/net/ethernet/qlogic/qed/qed_main.c:1298 qed_slowpath_start() warn: missing error code 'rc'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: d51e4af5c209 ("qed: aRFS infrastructure support") Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-30qed: rdma - don't wait for resources under hw error recovery flowShai Malin
[ Upstream commit 1ea7812326004afd2803cc968a4776ae5120a597 ] If the HW device is during recovery, the HW resources will never return, hence we shouldn't wait for the CID (HW context ID) bitmaps to clear. This fix speeds up the error recovery flow. Fixes: 64515dc899df ("qed: Add infrastructure for error detection and recovery") Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22qlcnic: Remove redundant unlock in qlcnic_pinit_from_romDinghao Liu
[ Upstream commit 9ddbc2a00d7f63fa9748f4278643193dac985f2d ] Previous commit 68233c583ab4 removes the qlcnic_rom_lock() in qlcnic_pinit_from_rom(), but remains its corresponding unlock function, which is odd. I'm not very sure whether the lock is missing, or the unlock is redundant. This bug is suggested by a static analysis tool, please advise. Fixes: 68233c583ab4 ("qlcnic: updated reset sequence") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22qed: Handle management FW errorShai Malin
commit 20e100f52730cd0db609e559799c1712b5f27582 upstream. Handle MFW (management FW) error response in order to avoid a crash during recovery flows. Changes from v1: - Add "Fixes tag". Fixes: tag 5e7ba042fd05 ("qed: Fix reading stale configuration information") Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-12qede: Fix memset corruptionShai Malin
[ Upstream commit e543468869e2532f5d7926e8f417782b48eca3dc ] Thanks to Kees Cook who detected the problem of memset that starting from not the first member, but sized for the whole struct. The better change will be to remove the redundant memset and to clear only the msix_cnt member. Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Reported-by: Kees Cook <keescook@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-12qed: Fix the VF msix vectors flowShai Malin
[ Upstream commit b0cd08537db8d2fbb227cdb2e5835209db295a24 ] For VFs we should return with an error in case we didn't get the exact number of msix vectors as we requested. Not doing that will lead to a crash when starting queues for this VF. Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03qed: Fix null-pointer dereference in qed_rdma_create_qp()Shai Malin
[ Upstream commit d33d19d313d3466abdf8b0428be7837aff767802 ] Fix a possible null-pointer dereference in qed_rdma_create_qp(). Changes from V2: - Revert checkpatch fixes. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03qed: qed ll2 race condition fixesShai Malin
[ Upstream commit 37110237f31105d679fc0aa7b11cdec867750ea7 ] Avoiding qed ll2 race condition and NULL pointer dereference as part of the remove and recovery flows. Changes form V1: - Change (!p_rx->set_prod_addr). - qed_ll2.c checkpatch fixes. Change from V2: - Revert "qed_ll2.c checkpatch fixes". Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32Dinghao Liu
[ Upstream commit 0a298d133893c72c96e2156ed7cb0f0c4a306a3e ] qlcnic_83xx_unlock_flash() is called on all paths after we call qlcnic_83xx_lock_flash(), except for one error path on failure of QLCRD32(), which may cause a deadlock. This bug is suggested by a static analysis tool, please advise. Fixes: 81d0aeb0a4fff ("qlcnic: flash template based firmware reset recovery") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20210816131405.24024-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ↵Letu Ren
ql_adapter_reset [ Upstream commit 92766c4628ea349c8ddab0cd7bd0488f36e5c4ce ] When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. Reported-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()Jia He
[ Upstream commit 6206b7981a36476f4695d661ae139f7db36a802d ] Liajian reported a bug_on hit on a ThunderX2 arm64 server with FastLinQ QL41000 ethernet controller: BUG: scheduling while atomic: kworker/0:4/531/0x00000200 [qed_probe:488()]hw prepare failed kernel BUG at mm/vmalloc.c:2355! Internal error: Oops - BUG: 0 [#1] SMP CPU: 0 PID: 531 Comm: kworker/0:4 Tainted: G W 5.4.0-77-generic #86-Ubuntu pstate: 00400009 (nzcv daif +PAN -UAO) Call trace: vunmap+0x4c/0x50 iounmap+0x48/0x58 qed_free_pci+0x60/0x80 [qed] qed_probe+0x35c/0x688 [qed] __qede_probe+0x88/0x5c8 [qede] qede_probe+0x60/0xe0 [qede] local_pci_probe+0x48/0xa0 work_for_cpu_fn+0x24/0x38 process_one_work+0x1d0/0x468 worker_thread+0x238/0x4e0 kthread+0xf0/0x118 ret_from_fork+0x10/0x18 In this case, qed_hw_prepare() returns error due to hw/fw error, but in theory work queue should be in process context instead of interrupt. The root cause might be the unpaired spin_{un}lock_bh() in _qed_mcp_cmd_and_union(), which causes botton half is disabled incorrectly. Reported-by: Lijian Zhang <Lijian.Zhang@arm.com> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-30net: qed: Fix memcpy() overflow of qed_dcbx_params()Kees Cook
[ Upstream commit 1c200f832e14420fa770193f9871f4ce2df00d07 ] The source (&dcbx_info->operational.params) and dest (&p_hwfn->p_dcbx_info->set.config.params) are both struct qed_dcbx_params (560 bytes), not struct qed_dcbx_admin_params (564 bytes), which is used as the memcpy() size. However it seems that struct qed_dcbx_operational_params (dcbx_info->operational)'s layout matches struct qed_dcbx_admin_params (p_hwfn->p_dcbx_info->set.config)'s 4 byte difference (3 padding, 1 byte for "valid"). On the assumption that the size is wrong (rather than the source structure type), adjust the memcpy() size argument to be 4 bytes smaller and add a BUILD_BUG_ON() to validate any changes to the structure sizes. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23netxen_nic: Fix an error handling path in 'netxen_nic_probe()'Christophe JAILLET
[ Upstream commit 49a10c7b176295f8fafb338911cf028e97f65f4d ] If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: e87ad5539343 ("netxen: support pci error handlers") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23qlcnic: Fix an error handling path in 'qlcnic_probe()'Christophe JAILLET
[ Upstream commit cb3376604a676e0302258b01893911bdd7aa5278 ] If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 451724c821c1 ("qlcnic: aer support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16net/qla3xxx: fix schedule while atomic in ql_sem_spinlockZheyu Ma
[ Upstream commit 13a6f3153922391e90036ba2267d34eed63196fc ] When calling the 'ql_sem_spinlock', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. The KASAN's log reveals it: [ 3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002 [ 3.238748 ] 2 locks held by swapper/0/1: [ 3.239151 ] #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x41/0x60 [ 3.240026 ] #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at: ql3xxx_probe+0x2aa/0xea0 [ 3.240873 ] Modules linked in: [ 3.241187 ] irq event stamp: 460854 [ 3.241541 ] hardirqs last enabled at (460853): [<ffffffff843051bf>] _raw_spin_unlock_irqrestore+0x4f/0x70 [ 3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>] _raw_spin_lock_irqsave+0x2a/0x70 [ 3.242245 ] softirqs last enabled at (446076): [<ffffffff846002e4>] __do_softirq+0x2e4/0x4b1 [ 3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>] irq_exit_rcu+0x100/0x110 [ 3.242245 ] Preemption disabled at: [ 3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] Kernel panic - not syncing: scheduling while atomic [ 3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00145 -gee7dc339169-dirty #16 [ 3.242245 ] Call Trace: [ 3.242245 ] dump_stack+0xba/0xf5 [ 3.242245 ] ? ql3xxx_probe+0x1f0/0xea0 [ 3.242245 ] panic+0x15a/0x3f2 [ 3.242245 ] ? vprintk+0x76/0x150 [ 3.242245 ] ? ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] __schedule_bug+0xae/0xe0 [ 3.242245 ] __schedule+0x72e/0xa00 [ 3.242245 ] schedule+0x43/0xf0 [ 3.242245 ] schedule_timeout+0x28b/0x500 [ 3.242245 ] ? del_timer_sync+0xf0/0xf0 [ 3.242245 ] ? msleep+0x2f/0x70 [ 3.242245 ] msleep+0x59/0x70 [ 3.242245 ] ql3xxx_probe+0x307/0xea0 [ 3.242245 ] ? _raw_spin_unlock_irqrestore+0x3a/0x70 [ 3.242245 ] ? pci_device_remove+0x110/0x110 [ 3.242245 ] local_pci_probe+0x45/0xa0 [ 3.242245 ] pci_device_probe+0x12b/0x1d0 [ 3.242245 ] really_probe+0x2a9/0x610 [ 3.242245 ] driver_probe_device+0x90/0x1d0 [ 3.242245 ] ? mutex_lock_nested+0x1b/0x20 [ 3.242245 ] device_driver_attach+0x68/0x70 [ 3.242245 ] __driver_attach+0x124/0x1b0 [ 3.242245 ] ? device_driver_attach+0x70/0x70 [ 3.242245 ] bus_for_each_dev+0xbb/0x110 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] driver_attach+0x27/0x30 [ 3.242245 ] bus_add_driver+0x1eb/0x2a0 [ 3.242245 ] driver_register+0xa9/0x180 [ 3.242245 ] __pci_register_driver+0x82/0x90 [ 3.242245 ] ? yellowfin_init+0x25/0x25 [ 3.242245 ] ql3xxx_driver_init+0x23/0x25 [ 3.242245 ] do_one_initcall+0x7f/0x3d0 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.242245 ] kernel_init_freeable+0x2aa/0x301 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] kernel_init+0x18/0x190 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ret_from_fork+0x1f/0x30 [ 3.242245 ] Dumping ftrace buffer: [ 3.242245 ] (ftrace buffer empty) [ 3.242245 ] Kernel Offset: disabled [ 3.242245 ] Rebooting in 1 seconds. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26qlcnic: Add null check after calling netdev_alloc_skbTom Seewald
commit 84460f01cba382553199bc1361f69a872d5abed4 upstream. The function qlcnic_dl_lb_test() currently calls netdev_alloc_skb() without checking afterwards that the allocation succeeded. Fix this by checking if the skb is NULL and returning an error in such a case. Breaking out of the loop if the skb is NULL is not correct as no error would be reported to the caller and no message would be printed for the user. Cc: David S. Miller <davem@davemloft.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Tom Seewald <tseewald@gmail.com> Link: https://lore.kernel.org/r/20210503115736.2104747-26-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26Revert "qlcnic: Avoid potential NULL pointer dereference"Greg Kroah-Hartman
commit b95b57dfe7a142bf2446548eb7f49340fd73e78b upstream. This reverts commit 5bf7295fe34a5251b1d241b9736af4697b590670. Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not. Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change. This commit does not properly detect if an error happens because the logic after this loop will not detect that there was a failed allocation. Cc: Aditya Pakki <pakki001@umn.edu> Cc: David S. Miller <davem@davemloft.net> Fixes: 5bf7295fe34a ("qlcnic: Avoid potential NULL pointer dereference") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-25-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30net/qlcnic: Fix a use after free in qlcnic_83xx_get_minidump_templateLv Yunlong
[ Upstream commit db74623a3850db99cb9692fda9e836a56b74198d ] In qlcnic_83xx_get_minidump_template, fw_dump->tmpl_hdr was freed by vfree(). But unfortunately, it is used when extended is true. Fixes: 7061b2bdd620e ("qlogic: Deletion of unnecessary checks before two function calls") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-23netxen_nic: fix MSI/MSI-x interruptsManish Chopra
[ Upstream commit a2bc221b972db91e4be1970e776e98f16aa87904 ] For all PCI functions on the netxen_nic adapter, interrupt mode (INTx or MSI) configuration is dependent on what has been configured by the PCI function zero in the shared interrupt register, as these adapters do not support mixed mode interrupts among the functions of a given adapter. Logic for setting MSI/MSI-x interrupt mode in the shared interrupt register based on PCI function id zero check is not appropriate for all family of netxen adapters, as for some of the netxen family adapters PCI function zero is not really meant to be probed/loaded in the host but rather just act as a management function on the device, which caused all the other PCI functions on the adapter to always use legacy interrupt (INTx) mode instead of choosing MSI/MSI-x interrupt mode. This patch replaces that check with port number so that for all type of adapters driver attempts for MSI/MSI-x interrupt modes. Fixes: b37eb210c076 ("netxen_nic: Avoid mixed mode interrupts") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20210107101520.6735-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17qed: select CONFIG_CRC32Arnd Bergmann
commit 2860d45a589818dd8ffd90cdc4bcf77f36a5a6be upstream. Without this, the driver fails to link: lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_grc_dump': qed_debug.c:(.text+0x4068): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_idle_chk_dump': qed_debug.c:(.text+0x51fc): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_mcp_trace_dump': qed_debug.c:(.text+0x6000): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_dbg_reg_fifo_dump': qed_debug.c:(.text+0x66cc): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o:qed_debug.c:(.text+0x6aa4): more undefined references to `crc32_le' follow Fixes: 7a4b21b7d1f0 ("qed: Add nvram selftest") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12qede: fix offload for IPIP tunnel packetsManish Chopra
[ Upstream commit 5d5647dad259bb416fd5d3d87012760386d97530 ] IPIP tunnels packets are unknown to device, hence these packets are incorrectly parsed and caused the packet corruption, so disable offlods for such packets at run time. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20201221145530.7771-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30qlcnic: Fix error code in probeDan Carpenter
[ Upstream commit 0d52848632a357948028eab67ff9b7cc0c12a0fb ] Return -EINVAL if we can't find the correct device. Currently it returns success. Fixes: 13159183ec7a ("qlcnic: 83xx base driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X9nHbMqEyI/xPfGd@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-24qlcnic: fix error return code in qlcnic_83xx_restart_hw()Zhang Changzhong
[ Upstream commit 3beb9be165083c2964eba1923601c3bfac0b02d4 ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 3ced0a88cd4c ("qlcnic: Add support to run firmware POST") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605248186-16013-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24qed: fix error return code in qed_iwarp_ll2_start()Zhang Changzhong
[ Upstream commit cb47d16ea21045c66eebbf5ed792e74a8537e27a ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 469981b17a4f ("qed: Add unaligned and packed packet processing") Fixes: fcb39f6c10b2 ("qed: Add mpa buffer descriptors for storing and processing mpa fpdus") Fixes: 1e28eaad07ea ("qed: Add iWARP support for fpdu spanned over more than two tcp packets") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Link: https://lore.kernel.org/r/1605532033-27373-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01net: qed: RDMA personality shouldn't fail VF loadDmitry Bogdanov
[ Upstream commit ce1cf9e5025f4e2d2198728391f1847b3e168bc6 ] Fix the assert during VF driver installation when the personality is iWARP Fixes: 1fe614d10f45 ("qed: Relax VF firmware requirements") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01net: qede: Disable aRFS for NPAR and 100GDmitry Bogdanov
[ Upstream commit 0367f05885b9f21d062447bd2ba1302ba3cc7392 ] In some configurations ARFS cannot be used, so disable it if device is not capable. Fixes: e4917d46a653 ("qede: Add aRFS support") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-22 19:29:23 +0000