aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/qlogic/qlcnic
AgeCommit message (Collapse)Author
2020-06-03qlcnic: fix missing release in qlcnic_83xx_interrupt_test.Qiushi Wu
commit 15c973858903009e995b2037683de29dfe968621 upstream. In function qlcnic_83xx_interrupt_test(), function qlcnic_83xx_diag_alloc_res() is not handled by function qlcnic_83xx_diag_free_res() after a call of the function qlcnic_alloc_mbx_args() failed. Fix this issue by adding a jump target "fail_mbx_args", and jump to this new target when qlcnic_alloc_mbx_args() failed. Fixes: b6b4316c8b2f ("qlcnic: Handle qlcnic_alloc_mbx_args() failure") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26qlcnic: Fix bad kzalloc null testXu Wang
In qlcnic_83xx_get_reset_instruction_template, the variable of null test is bad, so correct it. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23qlcnic: Fix CPU soft lockup while collecting firmware dumpManish Chopra
Driver while collecting firmware dump takes longer time to collect/process some of the firmware dump entries/memories. Bigger capture masks makes it worse as it results in larger amount of data being collected and results in CPU soft lockup. Place cond_resched() in some of the driver flows that are expectedly time consuming to relinquish the CPU to avoid CPU soft lockup panic. Signed-off-by: Shahed Shaikh <shshaikh@marvell.com> Tested-by: Yonggen Xu <Yonggen.Xu@dell.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-12netdev: pass the stuck queue to the timeout handlerMichael S. Tsirkin
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09treewide: Use sizeof_field() macroPankaj Bharadiya
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
2019-07-22net: Use skb accessors in network driversMatthew Wilcox (Oracle)
In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03qlcnic: remove redundant assignment to variable errColin Ian King
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-02drivers: use in_dev_for_each_ifa_rtnl/rcuFlorian Westphal
Like previous patches, use the new iterator macros to avoid sparse warnings once proper __rcu annotations are added. Compile tested only. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constantMichael Zhivich
qlcnic driver uses u16 to store SPEED_UKNOWN ethtool constant, which is defined as -1, resulting in value truncation and thus incorrect test results against SPEED_UNKNOWN. For example, the following test will print "False": u16 speed = SPEED_UNKNOWN; if (speed == SPEED_UNKNOWN) printf("True"); else printf("False"); Change storage of speed to use u32 to avoid this issue. Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-15qlcnic: Avoid potential NULL pointer dereferenceAditya Pakki
netdev_alloc_skb can fail and return a NULL pointer which is dereferenced without a check. The patch avoids such a scenario. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17net: Add extack argument to ndo_fdb_add()Petr Machata
Drivers may not be able to support certain FDB entries, and an error code is insufficient to give clear hints as to the reasons of rejection. In order to make it possible to communicate the rejection reason, extend ndo_fdb_add() with an extack argument. Adapt the existing implementations of ndo_fdb_add() to take the parameter (and ignore it). Pass the extack parameter when invoking ndo_fdb_add() from rtnl_fdb_add(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-18qlcnic: remove set but not used variables 'op, cmd_op'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1070:5: warning: variable 'op' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1342:5: warning: variable 'cmd_op' set but not used [-Wunused-but-set-variable] 'op' never used since introduction in commit 7cb03b2347d5 ("qlcnic: Support VF-PF communication channel commands.") 'cmd_op' not used since commit 6226204bcf20 ("qlcnic: Fix operation type and command type.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-28qlcnic: remove set but not used variables 'cur_rings, max_hw_rings, ↵YueHaibing
tx_desc_info' Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:4011:5: warning: variable 'max_hw_rings' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:4013:6: warning: variable 'cur_rings' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:2996:25: warning: variable 'tx_desc_info' set but not used [-Wunused-but-set-variable] 'cur_rings, max_hw_rings' never used since introduction in commit 34e8c406fda5 ("qlcnic: refactor Tx/SDS ring calculation and validation in driver.") 'tx_desc_info' never used since commit 95b3890ae39f ("qlcnic: Enhance Tx timeout debugging.") Also 'queue_type' only can be QLCNIC_RX_QUEUE/QLCNIC_TX_QUEUE, so make a trival cleanup on if statement. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07qlcnic: remove assumption that vlan_tci != 0Michał Mirosław
VLAN.TCI == 0 is perfectly valid (802.1p), so allow it to be accelerated. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-25Merge tag 'pci-v4.20-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
2018-10-22qlcnic: fix a return in qlcnic_dcb_get_capability()Dan Carpenter
These functions are supposed to return one on failure and zero on success. Returning a zero here could cause uninitialized variable bugs in several of the callers. For example: drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:1660 get_iscsi_dcb_priority() error: uninitialized symbol 'caps'. Fixes: 48365e485275 ("qlcnic: dcb: Add support for CEE Netlink interface.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net' overlapped the renaming of a netlink attribute in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() callsOza Pawandeep
After bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices"), AER errors are always cleared by the PCI core and drivers don't need to do it themselves. Remove calls to pci_cleanup_aer_uncorrect_error_status() from device driver error recovery functions. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog, remove PCI core changes, remove unused variables] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-09-29qlcnic: fix Tx descriptor corruption on 82xx devicesShahed Shaikh
In regular NIC transmission flow, driver always configures MAC using Tx queue zero descriptor as a part of MAC learning flow. But with multi Tx queue supported NIC, regular transmission can occur on any non-zero Tx queue and from that context it uses Tx queue zero descriptor to configure MAC, at the same time TX queue zero could be used by another CPU for regular transmission which could lead to Tx queue zero descriptor corruption and cause FW abort. This patch fixes this in such a way that driver always configures learned MAC address from the same Tx queue which is used for regular transmission. Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism") Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28qlcnic: remove ndo_poll_controllerEric Dumazet
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. qlcnic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Harish Patil <harish.patil@cavium.com> Cc: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12qlcnic: Remove set but not used variables 'fw_mbx' and 'hdr_size'Yue Haibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c: In function 'qlcnic_sriov_pull_bc_msg': drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c:907:6: warning: variable 'fw_mbx' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c: In function 'qlcnic_sriov_issue_bc_post': drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c:939:16: warning: variable 'hdr_size' set but not used [-Wunused-but-set-variable] Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09ethernet/qlogic: remove unused array msi_tgt_statusColin Ian King
Array msi_tgt_status is defined but never used, hence it is redundant and can be removed. Cleans up clang warning: warning: 'msi_tgt_status' defined but not used [-Wunused-const-variable=] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07qlcnic: Mark expected switch fall-througsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1410181 ("Missing break in switch") Addresses-Coverity-ID: 1410184 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-13qlogic: check kstrtoul() for errorsDan Carpenter
We accidentally left out the error handling for kstrtoul(). Fixes: a520030e326a ("qlcnic: Implement flash sysfs callback for 83xx adapter") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-23net: drivers/net: Convert random_ether_addr to eth_random_addrJoe Perches
random_ether_addr is a #define for eth_random_addr which is generally preferred in kernel code by ~3:1 Convert the uses of random_ether_addr to enable removing the #define Miscellanea: o Convert &vfmac[0] to equivalent vfmac and avoid unnecessary line wrap Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-03-26qlcnic: Eliminate duplicate barriers on weakly-ordered archsSinan Kaya
Code includes wmb() followed by writel(). writel() already has a barrier on some architectures like arm64. This ends up CPU observing two barriers back to back before executing the register write. Since code already has an explicit barrier call, changing writel() to writel_relaxed(). Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Acked-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26ethernet: Use octal not symbolic permissionsJoe Perches
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29qlcnic: fix deadlock bugJunxiao Bi
The following soft lockup was caught. This is a deadlock caused by recusive locking. Process kworker/u40:1:28016 was holding spin lock "mbx->queue_lock" in qlcnic_83xx_mailbox_worker(), while a softirq came in and ask the same spin lock in qlcnic_83xx_enqueue_mbx_cmd(). This lock should be hold by disable bh.. [161846.962125] NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [kworker/u40:1:28016] [161846.962367] Modules linked in: tun ocfs2 xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn xenfs xen_privcmd autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc sunrpc 8021q mrp garp bridge stp llc bonding dm_round_robin dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 shpchp lpc_ich mfd_core ioatdma ipmi_devintf ipmi_si ipmi_msghandler sg ext4 jbd2 mbcache2 sr_mod cdrom sd_mod igb i2c_algo_bit i2c_core ahci libahci megaraid_sas ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel qla2xxx scsi_transport_fc qlcnic crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod [161846.962454] [161846.962460] CPU: 1 PID: 28016 Comm: kworker/u40:1 Not tainted 4.1.12-94.5.9.el6uek.x86_64 #2 [161846.962463] Hardware name: Oracle Corporation SUN SERVER X4-2L /ASSY,MB,X4-2L , BIOS 26050100 09/19/2017 [161846.962489] Workqueue: qlcnic_mailbox qlcnic_83xx_mailbox_worker [qlcnic] [161846.962493] task: ffff8801f2e34600 ti: ffff88004ca5c000 task.ti: ffff88004ca5c000 [161846.962496] RIP: e030:[<ffffffff810013aa>] [<ffffffff810013aa>] xen_hypercall_sched_op+0xa/0x20 [161846.962506] RSP: e02b:ffff880202e43388 EFLAGS: 00000206 [161846.962509] RAX: 0000000000000000 RBX: ffff8801f6996b70 RCX: ffffffff810013aa [161846.962511] RDX: ffff880202e433cc RSI: ffff880202e433b0 RDI: 0000000000000003 [161846.962513] RBP: ffff880202e433d0 R08: 0000000000000000 R09: ffff8801fe893200 [161846.962516] R10: ffff8801fe400538 R11: 0000000000000206 R12: ffff880202e4b000 [161846.962518] R13: 0000000000000050 R14: 0000000000000001 R15: 000000000000020d [161846.962528] FS: 0000000000000000(0000) GS:ffff880202e40000(0000) knlGS:ffff880202e40000 [161846.962531] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [161846.962533] CR2: 0000000002612640 CR3: 00000001bb796000 CR4: 0000000000042660 [161846.962536] Stack: [161846.962538] ffff880202e43608 0000000000000000 ffffffff813f0442 ffff880202e433b0 [161846.962543] 0000000000000000 ffff880202e433cc ffffffff00000001 0000000000000000 [161846.962547] 00000009813f03d6 ffff880202e433e0 ffffffff813f0460 ffff880202e43440 [161846.962552] Call Trace: [161846.962555] <IRQ> [161846.962565] [<ffffffff813f0442>] ? xen_poll_irq_timeout+0x42/0x50 [161846.962570] [<ffffffff813f0460>] xen_poll_irq+0x10/0x20 [161846.962578] [<ffffffff81014222>] xen_lock_spinning+0xe2/0x110 [161846.962583] [<ffffffff81013f01>] __raw_callee_save_xen_lock_spinning+0x11/0x20 [161846.962592] [<ffffffff816e5c57>] ? _raw_spin_lock+0x57/0x80 [161846.962609] [<ffffffffa028acfc>] qlcnic_83xx_enqueue_mbx_cmd+0x7c/0xe0 [qlcnic] [161846.962623] [<ffffffffa028e008>] qlcnic_83xx_issue_cmd+0x58/0x210 [qlcnic] [161846.962636] [<ffffffffa028caf2>] qlcnic_83xx_sre_macaddr_change+0x162/0x1d0 [qlcnic] [161846.962649] [<ffffffffa028cb8b>] qlcnic_83xx_change_l2_filter+0x2b/0x30 [qlcnic] [161846.962657] [<ffffffff8160248b>] ? __skb_flow_dissect+0x18b/0x650 [161846.962670] [<ffffffffa02856e5>] qlcnic_send_filter+0x205/0x250 [qlcnic] [161846.962682] [<ffffffffa0285c77>] qlcnic_xmit_frame+0x547/0x7b0 [qlcnic] [161846.962691] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962696] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962701] [<ffffffff81630112>] sch_direct_xmit+0x112/0x220 [161846.962706] [<ffffffff8160b80f>] __dev_queue_xmit+0x1df/0x5e0 [161846.962710] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962721] [<ffffffffa0575bd5>] bond_dev_queue_xmit+0x35/0x80 [bonding] [161846.962729] [<ffffffffa05769fb>] __bond_start_xmit+0x1cb/0x210 [bonding] [161846.962736] [<ffffffffa0576a71>] bond_start_xmit+0x31/0x60 [bonding] [161846.962740] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962745] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962749] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962754] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962760] [<ffffffffa05cfa72>] vlan_dev_hard_start_xmit+0xb2/0x150 [8021q] [161846.962764] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962769] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962773] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962777] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962789] [<ffffffffa05adf74>] br_dev_queue_push_xmit+0x54/0xa0 [bridge] [161846.962797] [<ffffffffa05ae4ff>] br_forward_finish+0x2f/0x90 [bridge] [161846.962807] [<ffffffff810b0dad>] ? ttwu_do_wakeup+0x1d/0x100 [161846.962811] [<ffffffff815f929b>] ? __alloc_skb+0x8b/0x1f0 [161846.962818] [<ffffffffa05ae04d>] __br_forward+0x8d/0x120 [bridge] [161846.962822] [<ffffffff815f613b>] ? __kmalloc_reserve+0x3b/0xa0 [161846.962829] [<ffffffff810be55e>] ? update_rq_runnable_avg+0xee/0x230 [161846.962836] [<ffffffffa05ae176>] br_forward+0x96/0xb0 [bridge] [161846.962845] [<ffffffffa05af85e>] br_handle_frame_finish+0x1ae/0x420 [bridge] [161846.962853] [<ffffffffa05afc4f>] br_handle_frame+0x17f/0x260 [bridge] [161846.962862] [<ffffffffa05afad0>] ? br_handle_frame_finish+0x420/0x420 [bridge] [161846.962867] [<ffffffff8160d057>] __netif_receive_skb_core+0x1f7/0x870 [161846.962872] [<ffffffff8160d6f2>] __netif_receive_skb+0x22/0x70 [161846.962877] [<ffffffff8160d913>] netif_receive_skb_internal+0x23/0x90 [161846.962884] [<ffffffffa07512ea>] ? xenvif_idx_release+0xea/0x100 [xen_netback] [161846.962889] [<ffffffff816e5a10>] ? _raw_spin_unlock_irqrestore+0x20/0x50 [161846.962893] [<ffffffff8160e624>] netif_receive_skb_sk+0x24/0x90 [161846.962899] [<ffffffffa075269a>] xenvif_tx_submit+0x2ca/0x3f0 [xen_netback] [161846.962906] [<ffffffffa0753f0c>] xenvif_tx_action+0x9c/0xd0 [xen_netback] [161846.962915] [<ffffffffa07567f5>] xenvif_poll+0x35/0x70 [xen_netback] [161846.962920] [<ffffffff8160e01b>] napi_poll+0xcb/0x1e0 [161846.962925] [<ffffffff8160e1c0>] net_rx_action+0x90/0x1c0 [161846.962931] [<ffffffff8108aaba>] __do_softirq+0x10a/0x350 [161846.962938] [<ffffffff8108ae75>] irq_exit+0x125/0x130 [161846.962943] [<ffffffff813f03a9>] xen_evtchn_do_upcall+0x39/0x50 [161846.962950] [<ffffffff816e7ffe>] xen_do_hypervisor_callback+0x1e/0x40 [161846.962952] <EOI> [161846.962959] [<ffffffff816e5c4a>] ? _raw_spin_lock+0x4a/0x80 [161846.962964] [<ffffffff816e5b1e>] ? _raw_spin_lock_irqsave+0x1e/0xa0 [161846.962978] [<ffffffffa028e279>] ? qlcnic_83xx_mailbox_worker+0xb9/0x2a0 [qlcnic] [161846.962991] [<ffffffff810a14e1>] ? process_one_work+0x151/0x4b0 [161846.962995] [<ffffffff8100c3f2>] ? check_events+0x12/0x20 [161846.963001] [<ffffffff810a1960>] ? worker_thread+0x120/0x480 [161846.963005] [<ffffffff816e187b>] ? __schedule+0x30b/0x890 [161846.963010] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963015] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963021] [<ffffffff810a6b3e>] ? kthread+0xce/0xf0 [161846.963025] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963031] [<ffffffff816e6522>] ? ret_from_fork+0x42/0x70 [161846.963035] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963037] Code: cc 51 41 53 b8 1c 00 00 00 0f 05 41 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 51 41 53 b8 1d 00 00 00 0f 05 <41> 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-01qlcnic: remove redundant zero check on retries counterColin Ian King
At the end of the do while loop the integer counter retries will always be zero and so the subsequent check to see if it is zero is always true and therefore redundant. Remove the redundant check and always return -EIO on this return path. Also unbreak the literal string in dev_err message to clean up a checkpatch warning. Detected by CoverityScan, CID#744279 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-21qlogic: make device_attribute constBhumika Goyal
Make these const as they are only passed as an argument to the function device_create_file and device_remove_file and the corresponding arguments are of type const. Done using Coccinelle Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03qlcnic: add const to bin_attribute structureBhumika Goyal
Add const to bin_attribute structure as it is only passed to the functions sysfs_{remove/create}_bin_file. The corresponding arguments are of type const, so declare the structure to be const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19qlcnic: remove unnecessary static in qlcnic_dump_fw()Gustavo A. R. Silva
Remove unnecessary static on local variable fw_dump_ops. Such variable is initialized before being used, on every execution path throughout the function. The static has no benefit and, removing it reduces the object file size. This issue was detected using Coccinelle and the following semantic patch: @bad exists@ position p; identifier x; type T; @@ static T x@p; ... x = <+...x...+> @@ identifier x; expression e; type T; position p != bad.p; @@ -static T x@p; ... when != x when strict ?x = e; In the following log you can see a difference in the object file size. This log is the output of the size command, before and after the code change: before: text data bss dec hex filename 19032 2136 64 21232 52f0 drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.o after: text data bss dec hex filename 19020 2048 0 21068 524c drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.o Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02qlcnic: Fix tunnel offload for 82xx adaptersChopra, Manish
Qlogic's 82xx series adapter doesn't support tunnel offloads, driver incorrectly assumes that it is supported and causes firmware hang while running tunnel IO. This patch fixes this by not advertising tunnel offloads for 82xx adapters. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01qlcnic: Fix a sleep-in-atomic bug in qlcnic_82xx_hw_write_wx_2M and ↵Jia-Ju Bai
qlcnic_82xx_hw_read_wx_2M The driver may sleep under a write spin lock, and the function call path is: qlcnic_82xx_hw_write_wx_2M (acquire the lock by write_lock_irqsave) crb_win_lock qlcnic_pcie_sem_lock usleep_range qlcnic_82xx_hw_read_wx_2M (acquire the lock by write_lock_irqsave) crb_win_lock qlcnic_pcie_sem_lock usleep_range To fix it, the usleep_range is replaced with udelay. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11qlcnic: Update version to 5.3.66Chopra, Manish
Bumping up the version as couple of fixes added after 5.3.65 Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11qlcnic: Fix link configuration with autoneg disabledChopra, Manish
Currently driver returns error on speed configurations for 83xx adapter's non XGBE ports, due to this link doesn't come up on the ports using 1000Base-T as a connector with autoneg disabled. This patch fixes this with initializing appropriate port type based on queried module/connector types from hardware before any speed/autoneg configuration. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24qlcnic: fix unchecked return valuePan Bian
Function pci_find_ext_capability() may return 0, which is an invalid address. In function qlcnic_sriov_virtid_fn(), its return value is used without validation. This may result in invalid memory access bugs. This patch fixes the bug. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-27scripts/spelling.txt: add "partiton" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: partiton||partition Link: http://lkml.kernel.org/r/1481573103-11329-7-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22qlogic: qlcnic_sysfs: constify bin_attribute structuresBhumika Goyal
Declare bin_attribute structures as const as they are only passed as an arguments to the functions device_remove_bin_file and device_create_bin_file. These function arguments are of type const, so bin_attribute structures having this property can be made const too. Done using Coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct bin_attribute i@p = {...}; @ok1@ identifier r1.i; position p,p1; @@ ( device_remove_bin_file(...,&i@p) | device_create_bin_file(..., &i@p1) ) @bad@ position p!={r1.p,ok1.p,ok1.p1}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct bin_attribute i; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: qlogic: qlcnic: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qlcnic: Fix a memory leak in error handling pathChristophe Jaillet
If 'dma_alloc_coherent()' fails, we should release resources allocated so far, just as done in all other cases in this function. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net-next: treewide use is_vlan_dev() helper function.Parav Pandit
This patch makes use of is_vlan_dev() function instead of flag comparison which is exactly done by is_vlan_dev() helper function. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jon Maxwell <jmaxwell37@gmail.com> Acked-by: Johannes Thumshirn <jth@kernel.org> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-08 19:18:07 +0000