aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)Author
2024-03-26igb: Fix missing time sync eventsVinicius Costa Gomes
[ Upstream commit ee14cc9ea19ba9678177e2224a9c58cce5937c73 ] Fix "double" clearing of interrupts, which can cause external events or timestamps to be missed. The E1000_TSIRC Time Sync Interrupt Cause register can be cleared in two ways, by either reading it or by writing '1' into the specific cause bit. This is documented in section 8.16.1. The following flow was used: 1. read E1000_TSIRC into 'tsicr'; 2. handle the interrupts present into 'tsirc' and mark them in 'ack'; 3. write 'ack' into E1000_TSICR; As both (1) and (3) will clear the interrupt cause, if the same interrupt happens again between (1) and (3) it will be ignored, causing events to be missed. Remove the extra clear in (3). Fixes: 00c65578b47b ("igb: enable internal PPS for the i210") Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-26igb: move PEROUT and EXTTS isr logic to separate functionsRuud Bos
[ Upstream commit cf99c1dd7b7729091043374b90807c7a5f9fd9b1 ] Remove code duplication in the tsync interrupt handler function by moving this logic to separate functions. This keeps the interrupt handler readable and allows the new functions to be extended for adapter types other than i210. Signed-off-by: Ruud Bos <kernel.hbk@gmail.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: ee14cc9ea19b ("igb: Fix missing time sync events") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15net: ice: Fix potential NULL pointer dereference in ice_bridge_setlink()Rand Deeb
[ Upstream commit 06e456a05d669ca30b224b8ed962421770c1496c ] The function ice_bridge_setlink() may encounter a NULL pointer dereference if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently in nla_for_each_nested(). To address this issue, add a check to ensure that br_spec is not NULL before proceeding with the nested attribute iteration. Fixes: b1edc14a3fbf ("ice: Implement ice_bridge_getlink and ice_bridge_setlink") Signed-off-by: Rand Deeb <rand.sec96@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-15ixgbe: {dis, en}able irqs in ixgbe_txrx_ring_{dis, en}ableMaciej Fijalkowski
[ Upstream commit cbf996f52c4e658b3fb4349a869a62fd2d4c3c1c ] Currently routines that are supposed to toggle state of ring pair do not take care of associated interrupt with queue vector that these rings belong to. This causes funky issues such as dead interface due to irq misconfiguration, as per Pavel's report from Closes: tag. Add a function responsible for disabling single IRQ in EIMC register and call this as a very first thing when disabling ring pair during xsk_pool setup. For enable let's reuse ixgbe_irq_enable_queues(). Besides this, disable/enable NAPI as first/last thing when dealing with closing or opening ring pair that xsk_pool is being configured on. Reported-by: Pavel Vazharov <pavel@x3me.net> Closes: https://lore.kernel.org/netdev/CAJEV1ijxNyPTwASJER1bcZzS9nMoZJqfR86nu_3jFFVXzZQ4NA@mail.gmail.com/ Fixes: 024aa5800f32 ("ixgbe: added Rx/Tx ring disable/enable functions") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23i40e: Fix waiting for queues of all VSIs to be disabledIvan Vecera
[ Upstream commit c73729b64bb692186da080602cd13612783f52ac ] The function i40e_pf_wait_queues_disabled() iterates all PF's VSIs up to 'pf->hw.func_caps.num_vsis' but this is incorrect because the real number of VSIs can be up to 'pf->num_alloc_vsi' that can be higher. Fix this loop. Fixes: 69129dc39fac ("i40e: Modify Tx disable wait flow in case of DCB reconfiguration") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()Christophe JAILLET
[ Upstream commit bbc404d20d1b46d89b461918bc44587620eda200 ] All error handling paths, except this one, go to 'out' where release_swfw_sync() is called. This call balances the acquire_swfw_sync() call done at the beginning of the function. Branch to the error handling path in order to correctly release some resources in case of error. Fixes: ae14a1d8e104 ("ixgbe: Fix IOSF SB access issues") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23ixgbe: Refactor overtemp event handlingJedrzej Jagielski
[ Upstream commit 6c1b4af8c1b20c70dde01e58381685d6a4a1d2c8 ] Currently ixgbe driver is notified of overheating events via internal IXGBE_ERR_OVERTEMP error code. Change the approach for handle_lasi() to use freshly introduced is_overtemp function parameter which set when such event occurs. Change check_overtemp() to bool and return true if overtemp event occurs. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23ixgbe: Refactor returning internal error codesJedrzej Jagielski
[ Upstream commit 5795f533f30a80aa0473652876296ebc9129e33a ] Change returning codes to the kernel ones instead of the internal ones for the entire ixgbe driver. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: bbc404d20d1b ("ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23ixgbe: Remove non-inclusive languagePiotr Skajewski
[ Upstream commit 93b067f154b3edfd3d75a272fd9433bf787e2e1d ] Remove non-inclusive language from the driver. Additionally correct the duplication "from from" reported by checkpatch after the changes above. Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: bbc404d20d1b ("ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23net: remove unneeded breakTom Rix
[ Upstream commit 7ebb9db011088f9bd357791f49cb7012e66f29e2 ] A break is not needed if it is preceded by a return or goto Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201019172607.31622-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: bbc404d20d1b ("ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-15i40e: Restore VF MSI-X state during PCI resetAndrii Staikov
[ Upstream commit 371e576ff3e8580d91d49026e5d5faebf5565558 ] During a PCI FLR the MSI-X Enable flag in the VF PCI MSI-X capability register will be cleared. This can lead to issues when a VF is assigned to a VM because in these cases the VF driver receives no indication of the PF PCI error/reset and additionally it is incapable of restoring the cleared flag in the hypervisor configuration space without fully reinitializing the driver interrupt functionality. Since the VF driver is unable to easily resolve this condition on its own, restore the VF MSI-X flag during the PF PCI reset handling. Fixes: 19b7960b2da1 ("i40e: implement split PCI error reset handler") Co-developed-by: Karen Ostrowska <karen.ostrowska@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Co-developed-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-15i40e: fix use-after-free in i40e_aqc_add_filters()Ke Xiao
[ Upstream commit 6a15584e99db8918b60e507539c7446375dcf366 ] Commit 3116f59c12bd ("i40e: fix use-after-free in i40e_sync_filters_subtask()") avoided use-after-free issues, by increasing refcount during update the VSI filter list to the HW. However, it missed the unicast situation. When deleting an unicast FDB entry, the i40e driver will release the mac_filter, and i40e_service_task will concurrently request firmware to add the mac_filter, which will lead to the following use-after-free issue. Fix again for both netdev->uc and netdev->mc. BUG: KASAN: use-after-free in i40e_aqc_add_filters+0x55c/0x5b0 [i40e] Read of size 2 at addr ffff888eb3452d60 by task kworker/8:7/6379 CPU: 8 PID: 6379 Comm: kworker/8:7 Kdump: loaded Tainted: G Workqueue: i40e i40e_service_task [i40e] Call Trace: dump_stack+0x71/0xab print_address_description+0x6b/0x290 kasan_report+0x14a/0x2b0 i40e_aqc_add_filters+0x55c/0x5b0 [i40e] i40e_sync_vsi_filters+0x1676/0x39c0 [i40e] i40e_service_task+0x1397/0x2bb0 [i40e] process_one_work+0x56a/0x11f0 worker_thread+0x8f/0xf40 kthread+0x2a0/0x390 ret_from_fork+0x1f/0x40 Allocated by task 21948: kasan_kmalloc+0xa6/0xd0 kmem_cache_alloc_trace+0xdb/0x1c0 i40e_add_filter+0x11e/0x520 [i40e] i40e_addr_sync+0x37/0x60 [i40e] __hw_addr_sync_dev+0x1f5/0x2f0 i40e_set_rx_mode+0x61/0x1e0 [i40e] dev_uc_add_excl+0x137/0x190 i40e_ndo_fdb_add+0x161/0x260 [i40e] rtnl_fdb_add+0x567/0x950 rtnetlink_rcv_msg+0x5db/0x880 netlink_rcv_skb+0x254/0x380 netlink_unicast+0x454/0x610 netlink_sendmsg+0x747/0xb00 sock_sendmsg+0xe2/0x120 __sys_sendto+0x1ae/0x290 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0xa0/0x370 entry_SYSCALL_64_after_hwframe+0x65/0xca Freed by task 21948: __kasan_slab_free+0x137/0x190 kfree+0x8b/0x1b0 __i40e_del_filter+0x116/0x1e0 [i40e] i40e_del_mac_filter+0x16c/0x300 [i40e] i40e_addr_unsync+0x134/0x1b0 [i40e] __hw_addr_sync_dev+0xff/0x2f0 i40e_set_rx_mode+0x61/0x1e0 [i40e] dev_uc_del+0x77/0x90 rtnl_fdb_del+0x6a5/0x860 rtnetlink_rcv_msg+0x5db/0x880 netlink_rcv_skb+0x254/0x380 netlink_unicast+0x454/0x610 netlink_sendmsg+0x747/0xb00 sock_sendmsg+0xe2/0x120 __sys_sendto+0x1ae/0x290 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0xa0/0x370 entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 3116f59c12bd ("i40e: fix use-after-free in i40e_sync_filters_subtask()") Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Ke Xiao <xiaoke@sangfor.com.cn> Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Cc: Di Zhu <zhudi2@huawei.com> Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-15i40e: Fix filter input checks to prevent config with invalid valuesSudheer Mogilappagari
[ Upstream commit 3e48041d9820c17e0a51599d12e66c6e12a8d08d ] Prevent VF from configuring filters with unsupported actions or use REDIRECT action with invalid tc number. Current checks could cause out of bounds access on PF side. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20i40e: fix potential memory leaks in i40e_remove()Andrii Staikov
[ Upstream commit 5ca636d927a106780451d957734f02589b972e2b ] Instead of freeing memory of a single VSI, make sure the memory for all VSIs is cleared before releasing VSIs. Add releasing of their resources in a loop with the iteration number equal to the number of allocated VSIs. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-08i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITRIvan Vecera
[ Upstream commit 77a8c982ff0d4c3a14022c6fe9e3dbfb327552ec ] The I40E_TXR_FLAGS_WB_ON_ITR is i40e_ring flag and not i40e_pf one. Fixes: 8e0764b4d6be42 ("i40e/i40evf: Add support for writeback on ITR feature for X722") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231023212714.178032-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-08igc: Fix ambiguity in the ethtool advertisingSasha Neftin
[ Upstream commit e7684d29efdf37304c62bb337ea55b3428ca118e ] The 'ethtool_convert_link_mode_to_legacy_u32' method does not allow us to advertise 2500M speed support and TP (twisted pair) properly. Convert to 'ethtool_link_ksettings_test_link_mode' to advertise supported speed and eliminate ambiguity. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231019203641.3661960-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-08igb: Fix potential memory leak in igb_add_ethtool_nfc_entryMateusz Palczewski
[ Upstream commit 8c0b48e01daba5ca58f939a8425855d3f4f2ed14 ] Add check for return of igb_update_ethtool_nfc_entry so that in case of any potential errors the memory alocated for input will be freed. Fixes: 0e71def25281 ("igb: add support of RX network flow classification") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25i40e: prevent crash on probe if hw registers have invalid valuesMichal Schmidt
commit fc6f716a5069180c40a8c9b63631e97da34f64a3 upstream. The hardware provides the indexes of the first and the last available queue and VF. From the indexes, the driver calculates the numbers of queues and VFs. In theory, a faulty device might say the last index is smaller than the first index. In that case, the driver's calculation would underflow, it would attempt to write to non-existent registers outside of the ioremapped range and crash. I ran into this not by having a faulty device, but by an operator error. I accidentally ran a QE test meant for i40e devices on an ice device. The test used 'echo i40e > /sys/...ice PCI device.../driver_override', bound the driver to the device and crashed in one of the wr32 calls in i40e_clear_hw. Add checks to prevent underflows in the calculations of num_queues and num_vfs. With this fix, the wrong device probing reports errors and returns a failure without crashing. Fixes: 838d41d92a90 ("i40e: clear all queues and interrupts") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Link: https://lore.kernel.org/r/20231011233334.336092-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25ice: fix over-shifted variableJesse Brandeburg
commit 242e34500a32631f85c2b4eb6cb42a368a39e54f upstream. Since the introduction of the ice driver the code has been double-shifting the RSS enabling field, because the define already has shifts in it and can't have the regular pattern of "a << shiftval & mask" applied. Most places in the code got it right, but one line was still wrong. Fix this one location for easy backports to stable. An in-progress patch fixes the defines to "standard" and will be applied as part of the regular -next process sometime after this one. Fixes: d76a60ba7afb ("ice: Add support for VLANs and offloads") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> CC: stable@vger.kernel.org Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231010203101.406248-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25ixgbe: fix crash with empty VF macvlan listDan Carpenter
[ Upstream commit 7b5add9af567c44e12196107f0fe106e194034fd ] The adapter->vf_mvs.l list needs to be initialized even if the list is empty. Otherwise it will lead to crashes. Fixes: a1cbb15c1397 ("ixgbe: Add macvlan support for VF") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/ZSADNdIw8zFx1xw2@kadam Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10i40e: fix return of uninitialized aq_ret in i40e_set_vsi_promiscStefan Assmann
[ Upstream commit e1e1b5356eb48dce4307f5cae10e4d6d5bd3df74 ] drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c: In function ‘i40e_set_vsi_promisc’: drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:1176:14: error: ‘aq_ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized] i40e_status aq_ret; In case the code inside the if statement and the for loop does not get executed aq_ret will be uninitialized when the variable gets returned at the end of the function. Avoid this by changing num_vlans from int to u16, so aq_ret always gets set. Making this change in additional places as num_vlans should never be negative. Fixes: 37d318d7805f ("i40e: Remove scheduling while atomic possibility") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Acked-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10i40e: always propagate error value in i40e_set_vsi_promisc()Stefan Assmann
[ Upstream commit b6f23d3817b965bcd6d72aab1f438ff6d16a0691 ] The for loop in i40e_set_vsi_promisc() reports errors via dev_err() but does not propagate the error up the call chain. Instead it continues the loop and potentially overwrites the reported error value. This results in the error being recorded in the log buffer, but the caller might never know anything went the wrong way. To avoid this situation i40e_set_vsi_promisc() needs to temporarily store the error after reporting it. This is still not optimal as multiple different errors may occur, so store the first error and hope that's the main issue. Fixes: 37d318d7805f (i40e: Remove scheduling while atomic possibility) Reported-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10i40e: improve locking of mac_filter_hashStefan Assmann
[ Upstream commit 8b4b06919fd66caf49fdf4fe59f9d6312cf7956d ] i40e_config_vf_promiscuous_mode() calls i40e_getnum_vf_vsi_vlan_filters() without acquiring the mac_filter_hash_lock spinlock. This is unsafe because mac_filter_hash may get altered in another thread while i40e_getnum_vf_vsi_vlan_filters() traverses the hashes. Simply adding the spinlock in i40e_getnum_vf_vsi_vlan_filters() is not possible as it already gets called in i40e_get_vlan_list_sync() with the spinlock held. Therefore adding a wrapper that acquires the spinlock and call the correct function where appropriate. Fixes: 37d318d7805f ("i40e: Remove scheduling while atomic possibility") Fix-suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10i40e: Fix VF VLAN offloading when port VLAN is configuredIvan Vecera
[ Upstream commit d0d362ffa33da4acdcf7aee2116ceef8c8fef658 ] If port VLAN is configured on a VF then any other VLANs on top of this VF are broken. During i40e_ndo_set_vf_port_vlan() call the i40e driver reset the VF and iavf driver asks PF (using VIRTCHNL_OP_GET_VF_RESOURCES) for VF capabilities but this reset occurs too early, prior setting of vf->info.pvid field and because this field can be zero during i40e_vc_get_vf_resources_msg() then VIRTCHNL_VF_OFFLOAD_VLAN capability is reported to iavf driver. This is wrong because iavf driver should not report VLAN offloading capability when port VLAN is configured as i40e does not support QinQ offloading. Fix the issue by moving VF reset after setting of vf->port_vlan_id field. Without this patch: $ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs $ ip link set enp2s0f0 vf 0 vlan 3 $ ip link set enp2s0f0v0 up $ ip link add link enp2s0f0v0 name vlan4 type vlan id 4 $ ip link set vlan4 up ... $ ethtool -k enp2s0f0v0 | grep vlan-offload rx-vlan-offload: on tx-vlan-offload: on $ dmesg -l err | grep iavf [1292500.742914] iavf 0000:02:02.0: Failed to add VLAN filter, error IAVF_ERR_INVALID_QP_ID With this patch: $ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs $ ip link set enp2s0f0 vf 0 vlan 3 $ ip link set enp2s0f0v0 up $ ip link add link enp2s0f0v0 name vlan4 type vlan id 4 $ ip link set vlan4 up ... $ ethtool -k enp2s0f0v0 | grep vlan-offload rx-vlan-offload: off [requested on] tx-vlan-offload: off [requested on] $ dmesg -l err | grep iavf Fixes: f9b4b6278d51 ("i40e: Reset the VF upon conflicting VLAN configuration") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10i40e: Fix warning message and call stack during rmmod i40e driverKaren Sornek
[ Upstream commit 3a3b311e3881172fc8e019b6508f04bc40c92d9d ] Restore part of reset functionality used when reset is called from the VF to reset itself. Without this fix warning message is displayed when VF is being removed via sysfs. Fix the crash of the VF during reset by ensuring that the PF receives the reset message successfully. Refactor code to use one function instead of two. Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: d0d362ffa33d ("i40e: Fix VF VLAN offloading when port VLAN is configured") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10i40e: Remove scheduling while atomic possibilityAleksandr Loktionov
[ Upstream commit 37d318d7805f25b672bfd74fc694f19a2ee9665d ] In some occasions task held spinlock (mac_filter_hash_lock), while being rescheduled due to admin queue mutex_lock. The struct i40e_spinlock asq_spinlock, which later expands to struct mutex spinlock. Moved i40e_aq_set_vsi_multicast_promiscuous(), i40e_aq_set_vsi_unicast_promiscuous(), i40e_aq_set_vsi_mc_promisc_on_vlan(), and i40e_aq_set_vsi_uc_promisc_on_vlan() outside of atomic context. Without this patch there is a race condition, which might result in scheduling while in atomic context. The race condition is between the thread, which holds mac_filter_hash_lock, while trying to acquire an admin queue mutex and a thread, which already has said admin queue mutex. The thread, which holds spinlock, fails to acquire the mutex, which causes this thread to sleep. Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Stable-dep-of: d0d362ffa33d ("i40e: Fix VF VLAN offloading when port VLAN is configured") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-10i40e: Fix for persistent lldp supportSylwia Wnuczko
[ Upstream commit ff9246571a2e79944d6d4d22de4f717081beb5d3 ] This patch fixes function to read NVM module data and uses it to read current LLDP agent configuration from NVM API version 1.8. Signed-off-by: Sylwia Wnuczko <sylwia.wnuczko@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Stable-dep-of: d0d362ffa33d ("i40e: Fix VF VLAN offloading when port VLAN is configured") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23ixgbe: fix timestamp configuration codeVadim Fedorenko
[ Upstream commit 3c44191dd76cf9c0cc49adaf34384cbd42ef8ad2 ] The commit in fixes introduced flags to control the status of hardware configuration while processing packets. At the same time another structure is used to provide configuration of timestamper to user-space applications. The way it was coded makes this structures go out of sync easily. The repro is easy for 82599 chips: [root@hostname ~]# hwstamp_ctl -i eth0 -r 12 -t 1 current settings: tx_type 0 rx_filter 0 new settings: tx_type 1 rx_filter 12 The eth0 device is properly configured to timestamp any PTPv2 events. [root@hostname ~]# hwstamp_ctl -i eth0 -r 1 -t 1 current settings: tx_type 1 rx_filter 12 SIOCSHWTSTAMP failed: Numerical result out of range The requested time stamping mode is not supported by the hardware. The error is properly returned because HW doesn't support all packets timestamping. But the adapter->flags is cleared of timestamp flags even though no HW configuration was done. From that point no RX timestamps are received by user-space application. But configuration shows good values: [root@hostname ~]# hwstamp_ctl -i eth0 current settings: tx_type 1 rx_filter 12 Fix the issue by applying new flags only when the HW was actually configured. Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23igb: Change IGB_MIN to allow set rx/tx value between 64 and 80Olga Zaborska
[ Upstream commit 6319685bdc8ad5310890add907b7c42f89302886 ] Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx value between 64 and 80. All igb devices can use as low as 64 descriptors. This change will unify igb with other drivers. Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64") Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Olga Zaborska <olga.zaborska@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23igbvf: Change IGBVF_MIN to allow set rx/tx value between 64 and 80Olga Zaborska
[ Upstream commit 8360717524a24a421c36ef8eb512406dbd42160a ] Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx value between 64 and 80. All igbvf devices can use as low as 64 descriptors. This change will unify igbvf with other drivers. Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64") Fixes: d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions") Signed-off-by: Olga Zaborska <olga.zaborska@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23igc: Change IGC_MIN to allow set rx/tx value between 64 and 80Olga Zaborska
[ Upstream commit 5aa48279712e1f134aac908acde4df798955a955 ] Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx value between 64 and 80. All igc devices can use as low as 64 descriptors. This change will unify igc with other drivers. Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64") Fixes: 0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers") Signed-off-by: Olga Zaborska <olga.zaborska@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23igb: disable virtualization features on 82580Corinna Vinschen
[ Upstream commit fa09bc40b21a33937872c4c4cf0f266ec9fa4869 ] Disable virtualization features on 82580 just as on i210/i211. This avoids that virt functions are acidentally called on 82850. Fixes: 55cac248caa4 ("igb: Add full support for 82580 devices") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23igb: set max size RX buffer when store bad packet is enabledRadoslaw Tyl
commit bb5ed01cd2428cd25b1c88a3a9cba87055eb289f upstream. Increase the RX buffer size to 3K when the SBP bit is on. The size of the RX buffer determines the number of pages allocated which may not be sufficient for receive frames larger than the set MTU size. Cc: stable@vger.kernel.org Fixes: 89eaefb61dc9 ("igb: Support RX-ALL feature flag.") Reported-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com> Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30igb: Avoid starting unnecessary workqueuesAlessio Igor Bogani
[ Upstream commit b888c510f7b3d64ca75fc0f43b4a4bd1a611312f ] If ptp_clock_register() fails or CONFIG_PTP isn't enabled, avoid starting PTP related workqueues. In this way we can fix this: BUG: unable to handle page fault for address: ffffc9000440b6f8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 100000067 P4D 100000067 PUD 1001e0067 PMD 107dc5067 PTE 0 Oops: 0000 [#1] PREEMPT SMP [...] Workqueue: events igb_ptp_overflow_check RIP: 0010:igb_rd32+0x1f/0x60 [...] Call Trace: igb_ptp_read_82580+0x20/0x50 timecounter_read+0x15/0x60 igb_ptp_overflow_check+0x1a/0x50 process_one_work+0x1cb/0x3c0 worker_thread+0x53/0x3f0 ? rescuer_thread+0x370/0x370 kthread+0x142/0x160 ? kthread_associate_blkcg+0xc0/0xc0 ret_from_fork+0x1f/0x30 Fixes: 1f6e8178d685 ("igb: Prevent dropped Tx timestamps via work items and interrupts.") Fixes: d339b1331616 ("igb: add PTP Hardware Clock code") Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230821171927.2203644-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30i40e: fix misleading debug logsAndrii Staikov
[ Upstream commit 2f2beb8874cb0844e84ad26e990f05f4f13ff63f ] Change "write" into the actual "read" word. Change parameters description. Fixes: 7073f46e443e ("i40e: Add AQ commands for NVM Update for X722") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11vxlan: calculate correct header length for GPEJiri Benc
[ Upstream commit 94d166c5318c6edd1e079df8552233443e909c33 ] VXLAN-GPE does not add an extra inner Ethernet header. Take that into account when calculating header length. This causes problems in skb_tunnel_check_pmtu, where incorrect PMTU is cached. In the collect_md mode (which is the only mode that VXLAN-GPE supports), there's no magic auto-setting of the tunnel interface MTU. It can't be, since the destination and thus the underlying interface may be different for each packet. So, the administrator is responsible for setting the correct tunnel interface MTU. Apparently, the administrators are capable enough to calculate that the maximum MTU for VXLAN-GPE is (their_lower_MTU - 36). They set the tunnel interface MTU to 1464. If you run a TCP stream over such interface, it's then segmented according to the MTU 1464, i.e. producing 1514 bytes frames. Which is okay, this still fits the lower MTU. However, skb_tunnel_check_pmtu (called from vxlan_xmit_one) uses 50 as the header size and thus incorrectly calculates the frame size to be 1528. This leads to ICMP too big message being generated (locally), PMTU of 1450 to be cached and the TCP stream to be resegmented. The fix is to use the correct actual header size, especially for skb_tunnel_check_pmtu calculation. Fixes: e1e5314de08ba ("vxlan: implement GPE") Signed-off-by: Jiri Benc <jbenc@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11i40e: Fix an NULL vs IS_ERR() bug for debugfs_create_dir()Wang Ming
[ Upstream commit 043b1f185fb0f3939b7427f634787706f45411c4 ] The debugfs_create_dir() function returns error pointers. It never returns NULL. Most incorrect error checks were fixed, but the one in i40e_dbg_init() was forgotten. Fix the remaining error check. Fixes: 02e9c290814c ("i40e: debugfs interface") Signed-off-by: Wang Ming <machel@vivo.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27iavf: Fix use-after-free in free_netdevDing Hui
[ Upstream commit 5f4fa1672d98fe99d2297b03add35346f1685d6b ] We do netif_napi_add() for all allocated q_vectors[], but potentially do netif_napi_del() for part of them, then kfree q_vectors and leave invalid pointers at dev->napi_list. Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) wait Result: [ 4093.900222] ================================================================== [ 4093.900230] BUG: KASAN: use-after-free in free_netdev+0x308/0x390 [ 4093.900232] Read of size 8 at addr ffff88b4dc145640 by task repro.sh/6699 [ 4093.900233] [ 4093.900236] CPU: 10 PID: 6699 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 4093.900238] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021 [ 4093.900239] Call Trace: [ 4093.900244] dump_stack+0x71/0xab [ 4093.900249] print_address_description+0x6b/0x290 [ 4093.900251] ? free_netdev+0x308/0x390 [ 4093.900252] kasan_report+0x14a/0x2b0 [ 4093.900254] free_netdev+0x308/0x390 [ 4093.900261] iavf_remove+0x825/0xd20 [iavf] [ 4093.900265] pci_device_remove+0xa8/0x1f0 [ 4093.900268] device_release_driver_internal+0x1c6/0x460 [ 4093.900271] pci_stop_bus_device+0x101/0x150 [ 4093.900273] pci_stop_and_remove_bus_device+0xe/0x20 [ 4093.900275] pci_iov_remove_virtfn+0x187/0x420 [ 4093.900277] ? pci_iov_add_virtfn+0xe10/0xe10 [ 4093.900278] ? pci_get_subsys+0x90/0x90 [ 4093.900280] sriov_disable+0xed/0x3e0 [ 4093.900282] ? bus_find_device+0x12d/0x1a0 [ 4093.900290] i40e_free_vfs+0x754/0x1210 [i40e] [ 4093.900298] ? i40e_reset_all_vfs+0x880/0x880 [i40e] [ 4093.900299] ? pci_get_device+0x7c/0x90 [ 4093.900300] ? pci_get_subsys+0x90/0x90 [ 4093.900306] ? pci_vfs_assigned.part.7+0x144/0x210 [ 4093.900309] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900315] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 4093.900318] sriov_numvfs_store+0x214/0x290 [ 4093.900320] ? sriov_totalvfs_show+0x30/0x30 [ 4093.900321] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900323] ? __check_object_size+0x15a/0x350 [ 4093.900326] kernfs_fop_write+0x280/0x3f0 [ 4093.900329] vfs_write+0x145/0x440 [ 4093.900330] ksys_write+0xab/0x160 [ 4093.900332] ? __ia32_sys_read+0xb0/0xb0 [ 4093.900334] ? fput_many+0x1a/0x120 [ 4093.900335] ? filp_close+0xf0/0x130 [ 4093.900338] do_syscall_64+0xa0/0x370 [ 4093.900339] ? page_fault+0x8/0x30 [ 4093.900341] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 4093.900357] RIP: 0033:0x7f16ad4d22c0 [ 4093.900359] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24 [ 4093.900360] RSP: 002b:00007ffd6491b7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 4093.900362] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f16ad4d22c0 [ 4093.900363] RDX: 0000000000000002 RSI: 0000000001a41408 RDI: 0000000000000001 [ 4093.900364] RBP: 0000000001a41408 R08: 00007f16ad7a1780 R09: 00007f16ae1f2700 [ 4093.900364] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002 [ 4093.900365] R13: 0000000000000001 R14: 00007f16ad7a0620 R15: 0000000000000001 [ 4093.900367] [ 4093.900368] Allocated by task 820: [ 4093.900371] kasan_kmalloc+0xa6/0xd0 [ 4093.900373] __kmalloc+0xfb/0x200 [ 4093.900376] iavf_init_interrupt_scheme+0x63b/0x1320 [iavf] [ 4093.900380] iavf_watchdog_task+0x3d51/0x52c0 [iavf] [ 4093.900382] process_one_work+0x56a/0x11f0 [ 4093.900383] worker_thread+0x8f/0xf40 [ 4093.900384] kthread+0x2a0/0x390 [ 4093.900385] ret_from_fork+0x1f/0x40 [ 4093.900387] 0xffffffffffffffff [ 4093.900387] [ 4093.900388] Freed by task 6699: [ 4093.900390] __kasan_slab_free+0x137/0x190 [ 4093.900391] kfree+0x8b/0x1b0 [ 4093.900394] iavf_free_q_vectors+0x11d/0x1a0 [iavf] [ 4093.900397] iavf_remove+0x35a/0xd20 [iavf] [ 4093.900399] pci_device_remove+0xa8/0x1f0 [ 4093.900400] device_release_driver_internal+0x1c6/0x460 [ 4093.900401] pci_stop_bus_device+0x101/0x150 [ 4093.900402] pci_stop_and_remove_bus_device+0xe/0x20 [ 4093.900403] pci_iov_remove_virtfn+0x187/0x420 [ 4093.900404] sriov_disable+0xed/0x3e0 [ 4093.900409] i40e_free_vfs+0x754/0x1210 [i40e] [ 4093.900415] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 4093.900416] sriov_numvfs_store+0x214/0x290 [ 4093.900417] kernfs_fop_write+0x280/0x3f0 [ 4093.900418] vfs_write+0x145/0x440 [ 4093.900419] ksys_write+0xab/0x160 [ 4093.900420] do_syscall_64+0xa0/0x370 [ 4093.900421] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 4093.900422] 0xffffffffffffffff [ 4093.900422] [ 4093.900424] The buggy address belongs to the object at ffff88b4dc144200 which belongs to the cache kmalloc-8k of size 8192 [ 4093.900425] The buggy address is located 5184 bytes inside of 8192-byte region [ffff88b4dc144200, ffff88b4dc146200) [ 4093.900425] The buggy address belongs to the page: [ 4093.900427] page:ffffea00d3705000 refcount:1 mapcount:0 mapping:ffff88bf04415c80 index:0x0 compound_mapcount: 0 [ 4093.900430] flags: 0x10000000008100(slab|head) [ 4093.900433] raw: 0010000000008100 dead000000000100 dead000000000200 ffff88bf04415c80 [ 4093.900434] raw: 0000000000000000 0000000000030003 00000001ffffffff 0000000000000000 [ 4093.900434] page dumped because: kasan: bad access detected [ 4093.900435] [ 4093.900435] Memory state around the buggy address: [ 4093.900436] ffff88b4dc145500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900437] ffff88b4dc145580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900438] >ffff88b4dc145600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900438] ^ [ 4093.900439] ffff88b4dc145680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900440] ffff88b4dc145700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900440] ================================================================== Although the patch #2 (of 2) can avoid the issue triggered by this repro.sh, there still are other potential risks that if num_active_queues is changed to less than allocated q_vectors[] by unexpected, the mismatched netif_napi_add/del() can also cause UAF. Since we actually call netif_napi_add() for all allocated q_vectors unconditionally in iavf_alloc_q_vectors(), so we should fix it by letting netif_napi_del() match to netif_napi_add(). Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Cc: Donglin Peng <pengdonglin@sangfor.com.cn> Cc: Huang Cun <huangcun@sangfor.com.cn> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27igb: Fix igb_down hung on surprise removalYing Hsu
[ Upstream commit 004d25060c78fc31f66da0fa439c544dda1ac9d5 ] In a setup where a Thunderbolt hub connects to Ethernet and a display through USB Type-C, users may experience a hung task timeout when they remove the cable between the PC and the Thunderbolt hub. This is because the igb_down function is called multiple times when the Thunderbolt hub is unplugged. For example, the igb_io_error_detected triggers the first call, and the igb_remove triggers the second call. The second call to igb_down will block at napi_synchronize. Here's the call trace: __schedule+0x3b0/0xddb ? __mod_timer+0x164/0x5d3 schedule+0x44/0xa8 schedule_timeout+0xb2/0x2a4 ? run_local_timers+0x4e/0x4e msleep+0x31/0x38 igb_down+0x12c/0x22a [igb 6615058754948bfde0bf01429257eb59f13030d4] __igb_close+0x6f/0x9c [igb 6615058754948bfde0bf01429257eb59f13030d4] igb_close+0x23/0x2b [igb 6615058754948bfde0bf01429257eb59f13030d4] __dev_close_many+0x95/0xec dev_close_many+0x6e/0x103 unregister_netdevice_many+0x105/0x5b1 unregister_netdevice_queue+0xc2/0x10d unregister_netdev+0x1c/0x23 igb_remove+0xa7/0x11c [igb 6615058754948bfde0bf01429257eb59f13030d4] pci_device_remove+0x3f/0x9c device_release_driver_internal+0xfe/0x1b4 pci_stop_bus_device+0x5b/0x7f pci_stop_bus_device+0x30/0x7f pci_stop_bus_device+0x30/0x7f pci_stop_and_remove_bus_device+0x12/0x19 pciehp_unconfigure_device+0x76/0xe9 pciehp_disable_slot+0x6e/0x131 pciehp_handle_presence_or_link_change+0x7a/0x3f7 pciehp_ist+0xbe/0x194 irq_thread_fn+0x22/0x4d ? irq_thread+0x1fd/0x1fd irq_thread+0x17b/0x1fd ? irq_forced_thread_fn+0x5f/0x5f kthread+0x142/0x153 ? __irq_get_irqchip_state+0x46/0x46 ? kthread_associate_blkcg+0x71/0x71 ret_from_fork+0x1f/0x30 In this case, igb_io_error_detected detaches the network interface and requests a PCIE slot reset, however, the PCIE reset callback is not being invoked and thus the Ethernet connection breaks down. As the PCIE error in this case is a non-fatal one, requesting a slot reset can be avoided. This patch fixes the task hung issue and preserves Ethernet connection by ignoring non-fatal PCIE errors. Signed-off-by: Ying Hsu <yinghsu@chromium.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230620174732.4145155-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27igc: set TP bit in 'supported' and 'advertising' fields of ↵Prasad Koya
ethtool_link_ksettings [ Upstream commit 9ac3fc2f42e5ffa1e927dcbffb71b15fa81459e2 ] set TP bit in the 'supported' and 'advertising' fields. i225/226 parts only support twisted pair copper. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Prasad Koya <prasad@arista.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-27igc: Remove delay during TX ring configurationMuhammad Husaini Zulkifli
[ Upstream commit cca28ceac7c7857bc2d313777017585aef00bcc4 ] Remove unnecessary delay during the TX ring configuration. This will cause delay, especially during link down and link up activity. Furthermore, old SKUs like as I225 will call the reset_adapter to reset the controller during TSN mode Gate Control List (GCL) setting. This will add more time to the configuration of the real-time use case. It doesn't mentioned about this delay in the Software User Manual. It might have been ported from legacy code I210 in the past. Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21igb: fix nvm.ops.read() error handlingAleksandr Loktionov
[ Upstream commit 48a821fd58837800750ec1b3962f0f799630a844 ] Add error handling into igb_set_eeprom() function, in case nvm.ops.read() fails just quit with error code asap. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21iavf: remove mask from iavf_irq_enable_queues()Ahmed Zaki
[ Upstream commit c37cf54c12cfaa51e7aaf88708167b0d3259e64e ] Enable more than 32 IRQs by removing the u32 bit mask in iavf_irq_enable_queues(). There is no need for the mask as there are no callers that select individual IRQs through the bitmask. Also, if the PF allocates more than 32 IRQs, this mask will prevent us from using all of them. Modify the comment in iavf_register.h to show that the maximum number allowed for the IRQ index is 63 as per the iAVF standard 1.0 [1]. link: [1] https://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ethernet-adaptive-virtual-function-hardware-spec.pdf Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230608200226.451861-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14i40e: fix build warnings in i40e_alloc.hGreg Kroah-Hartman
Not upstream as it was fixed in a much larger api change in newer kernels. gcc-13 rightfully complains that enum is not the same as an int, so fix up the function prototypes in i40e_alloc.h to be correct, solving a bunch of build warnings. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30igb: fix bit_shift to be in [1..8] rangeAleksandr Loktionov
[ Upstream commit 60d758659f1fb49e0d5b6ac2691ede8c0958795b ] In igb_hash_mc_addr() the expression: "mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]" shift by more than 7 bits always yields zero, so hash becomes not so different. Add initialization with bit_shift = 1 and add a loop condition to ensure bit_shift will be always in [1..8] range. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17ixgbe: Enable setting RSS table to default valuesJoe Damato
[ Upstream commit e85d3d55875f7a1079edfbc4e4e98d6f8aea9ac7 ] ethtool uses `ETHTOOL_GRXRINGS` to compute how many queues are supported by RSS. The driver should return the smaller of either: - The maximum number of RSS queues the device supports, OR - The number of RX queues configured Prior to this change, running `ethtool -X $iface default` fails if the number of queues configured is larger than the number supported by RSS, even though changing the queue count correctly resets the flowhash to use all supported queues. Other drivers (for example, i40e) will succeed but the flow hash will reset to support the maximum number of queues supported by RSS, even if that amount is smaller than the configured amount. Prior to this change: $ sudo ethtool -L eth1 combined 20 $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 20 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 24: 8 9 10 11 12 13 14 15 32: 0 1 2 3 4 5 6 7 ... You can see that the flowhash was correctly set to use the maximum number of queues supported by the driver (16). However, asking the NIC to reset to "default" fails: $ sudo ethtool -X eth1 default Cannot set RX flow hash configuration: Invalid argument After this change, the flowhash can be reset to default which will use all of the available RSS queues (16) or the configured queue count, whichever is smaller. Starting with eth1 which has 10 queues and a flowhash distributing to all 10 queues: $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 10 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 0 1 2 3 4 5 16: 6 7 8 9 0 1 2 3 ... Increasing the queue count to 48 resets the flowhash to distribute to 16 queues, as it did before this patch: $ sudo ethtool -L eth1 combined 48 $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 16 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 ... Due to the other bugfix in this series, the flowhash can be set to use queues 0-5: $ sudo ethtool -X eth1 equal 5 $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 16 RX ring(s): 0: 0 1 2 3 4 0 1 2 8: 3 4 0 1 2 3 4 0 16: 1 2 3 4 0 1 2 3 ... Due to this bugfix, the flowhash can be reset to default and use 16 queues: $ sudo ethtool -X eth1 default $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 16 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 ... Fixes: 91cd94bfe4f0 ("ixgbe: add basic support for setting and getting nfc controls") Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17ixgbe: Allow flow hash to be set via ethtoolJoe Damato
[ Upstream commit 4f3ed1293feb9502dc254b05802faf1ad3317ac6 ] ixgbe currently returns `EINVAL` whenever the flowhash it set by ethtool because the ethtool code in the kernel passes a non-zero value for hfunc that ixgbe should allow. When ethtool is called with `ETHTOOL_SRXFHINDIR`, `ethtool_set_rxfh_indir` will call ixgbe's set_rxfh function with `ETH_RSS_HASH_NO_CHANGE`. This value should be accepted. When ethtool is called with `ETHTOOL_SRSSH`, `ethtool_set_rxfh` will call ixgbe's set_rxfh function with `rxfh.hfunc`, which appears to be hardcoded in ixgbe to always be `ETH_RSS_HASH_TOP`. This value should also be accepted. Before this patch: $ sudo ethtool -L eth1 combined 10 $ sudo ethtool -X eth1 default Cannot set RX flow hash configuration: Invalid argument After this patch: $ sudo ethtool -L eth1 combined 10 $ sudo ethtool -X eth1 default $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 10 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 0 1 2 3 4 5 16: 6 7 8 9 0 1 2 3 24: 4 5 6 7 8 9 0 1 ... Fixes: 1c7cf0784e4d ("ixgbe: support for ethtool set_rxfh") Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-26e1000e: Disable TSO on i219-LM card to increase speedSebastian Basierski
[ Upstream commit 67d47b95119ad589b0a0b16b88b1dd9a04061ced ] While using i219-LM card currently it was only possible to achieve about 60% of maximum speed due to regression introduced in Linux 5.8. This was caused by TSO not being disabled by default despite commit f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround"). Fix that by disabling TSO during driver probe. Fixes: f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround") Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230417205345.1030801-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-26i40e: fix i40e_setup_misc_vector() error handlingAleksandr Loktionov
[ Upstream commit c86c00c6935505929cc9adb29ddb85e48c71f828 ] Add error handling of i40e_setup_misc_vector() in i40e_rebuild(). In case interrupt vectors setup fails do not re-open vsi-s and do not bring up vf-s, we have no interrupts to serve a traffic anyway. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-26i40e: fix accessing vsi->active_filters without holding lockAleksandr Loktionov
[ Upstream commit 8485d093b076e59baff424552e8aecfc5bd2d261 ] Fix accessing vsi->active_filters without holding the mac_filter_hash_lock. Move vsi->active_filters = 0 inside critical section and move clear_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state) after the critical section to ensure the new filters from other threads can be added only after filters cleaning in the critical section is finished. Fixes: 278e7d0b9d68 ("i40e: store MAC/VLAN filters in a hash with the MAC Address as key") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-07-06 10:41:07 +0000