aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
AgeCommit message (Collapse)Author
2024-02-23ixgbe: Refactor returning internal error codesJedrzej Jagielski
[ Upstream commit 5795f533f30a80aa0473652876296ebc9129e33a ] Change returning codes to the kernel ones instead of the internal ones for the entire ixgbe driver. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: bbc404d20d1b ("ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17ixgbe: Enable setting RSS table to default valuesJoe Damato
[ Upstream commit e85d3d55875f7a1079edfbc4e4e98d6f8aea9ac7 ] ethtool uses `ETHTOOL_GRXRINGS` to compute how many queues are supported by RSS. The driver should return the smaller of either: - The maximum number of RSS queues the device supports, OR - The number of RX queues configured Prior to this change, running `ethtool -X $iface default` fails if the number of queues configured is larger than the number supported by RSS, even though changing the queue count correctly resets the flowhash to use all supported queues. Other drivers (for example, i40e) will succeed but the flow hash will reset to support the maximum number of queues supported by RSS, even if that amount is smaller than the configured amount. Prior to this change: $ sudo ethtool -L eth1 combined 20 $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 20 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 24: 8 9 10 11 12 13 14 15 32: 0 1 2 3 4 5 6 7 ... You can see that the flowhash was correctly set to use the maximum number of queues supported by the driver (16). However, asking the NIC to reset to "default" fails: $ sudo ethtool -X eth1 default Cannot set RX flow hash configuration: Invalid argument After this change, the flowhash can be reset to default which will use all of the available RSS queues (16) or the configured queue count, whichever is smaller. Starting with eth1 which has 10 queues and a flowhash distributing to all 10 queues: $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 10 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 0 1 2 3 4 5 16: 6 7 8 9 0 1 2 3 ... Increasing the queue count to 48 resets the flowhash to distribute to 16 queues, as it did before this patch: $ sudo ethtool -L eth1 combined 48 $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 16 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 ... Due to the other bugfix in this series, the flowhash can be set to use queues 0-5: $ sudo ethtool -X eth1 equal 5 $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 16 RX ring(s): 0: 0 1 2 3 4 0 1 2 8: 3 4 0 1 2 3 4 0 16: 1 2 3 4 0 1 2 3 ... Due to this bugfix, the flowhash can be reset to default and use 16 queues: $ sudo ethtool -X eth1 default $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 16 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 ... Fixes: 91cd94bfe4f0 ("ixgbe: add basic support for setting and getting nfc controls") Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17ixgbe: Allow flow hash to be set via ethtoolJoe Damato
[ Upstream commit 4f3ed1293feb9502dc254b05802faf1ad3317ac6 ] ixgbe currently returns `EINVAL` whenever the flowhash it set by ethtool because the ethtool code in the kernel passes a non-zero value for hfunc that ixgbe should allow. When ethtool is called with `ETHTOOL_SRXFHINDIR`, `ethtool_set_rxfh_indir` will call ixgbe's set_rxfh function with `ETH_RSS_HASH_NO_CHANGE`. This value should be accepted. When ethtool is called with `ETHTOOL_SRSSH`, `ethtool_set_rxfh` will call ixgbe's set_rxfh function with `rxfh.hfunc`, which appears to be hardcoded in ixgbe to always be `ETH_RSS_HASH_TOP`. This value should also be accepted. Before this patch: $ sudo ethtool -L eth1 combined 10 $ sudo ethtool -X eth1 default Cannot set RX flow hash configuration: Invalid argument After this patch: $ sudo ethtool -L eth1 combined 10 $ sudo ethtool -X eth1 default $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 10 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 0 1 2 3 4 5 16: 6 7 8 9 0 1 2 3 24: 4 5 6 7 8 9 0 1 ... Fixes: 1c7cf0784e4d ("ixgbe: support for ethtool set_rxfh") Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-26ixgbe: Check DDM existence in transceiver before accessMauro S. M. Rodrigues
Some transceivers may comply with SFF-8472 but not implement the Digital Diagnostic Monitoring (DDM) interface described in it. The existence of such area is specified by bit 6 of byte 92, set to 1 if implemented. Currently, due to not checking this bit ixgbe fails trying to read SFP module's eeprom with the follow message: ethtool -m enP51p1s0f0 Cannot get Module EEPROM data: Input/output error Because it fails to read the additional 256 bytes in which it was assumed to exist the DDM data. This issue was noticed using a Mellanox Passive DAC PN 01FT738. The eeprom data was confirmed by Mellanox as correct and present in other Passive DACs in from other manufacturers. Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07i40e/ixgbe/igb: fail on new WoL flag setting WAKE_MAGICSECURETodd Fujinaka
There's a new flag for setting WoL filters that is only enabled on one manufacturer's NICs, and it's not ours. Fail with EOPNOTSUPP. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-28ixgbe: add VF IPsec offload enable flagShannon Nelson
Add a private flag to expressly enable support for VF IPsec offload. The VF will have to be "trusted" in order to use the hardware offload, but because of the general concerns of managing VF access, we want to be sure the user specifically is enabling the feature. This is likely a candidate for becoming a netdev feature flag. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-07-26ixgbe: Refactor queue disable logic to take completion time into accountAlexander Duyck
This change is meant to allow us to take completion time into account when disabling queues. Previously we were just working with hard coded values for how long we should wait. This worked fine for the standard case where completion timeout was operating in the 50us to 50ms range, however on platforms that have higher completion timeout times this was resulting in Rx queues disable messages being displayed as we weren't waiting long enough for outstanding Rx DMA completions. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Don Buchholz <donald.buchholz@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-07-26ixgbe: add ipsec security registers into ethtool register dumpShannon Nelson
Add the ixgbe's security configuration registers into the register dump. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-12ixgbe: Add receive length error counterTonghao Zhang
ixgbe enabled rlec counter and the rx_error used it. We can export the counter directly via ethtool -S ethX. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26ixgbe: Avoid to write the RETA table when unnecessaryTonghao Zhang
If indir == 0 in the ixgbe_set_rxfh(), it is unnecessary to write the HW. Because redirection table is not changed. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbe: Don't report unsupported timestamping filters for X550Miroslav Lichvar
The current code enables on X550 timestamping of all packets for any filter, which means ethtool should not report any PTP-specific filters as unsupported. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: ipsec offload statsShannon Nelson
Add a simple statistic to count the ipsec offloads. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-12ixgbe: Don't assume dev->num_tc is equal to hardware TC configAlexander Duyck
The code throughout ixgbe was assuming that dev->num_tc was populated and configured with the driver, when in fact this can be configured via mqprio without any hardware coordination other than restricting us to the real number of Tx queues we advertise. Instead of handling things this way we need to keep a local copy of the number of TCs in use so that we don't accidentally pull in the TC configuration from mqprio when it is configured in software mode. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-09ixgbe: extend firmware version supportPaul Greenwalt
Extend FW version reporting by displaying information from the iSCSI or OEM block in the EEPROM. This will allow us to more accurately identify the FW. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-05ixgbe: setup xdp_rxq_infoJesper Dangaard Brouer
Driver hook points for xdp_rxq_info: * reg : ixgbe_setup_rx_resources() * unreg: ixgbe_free_rx_resources() Tested on actual hardware. V2: Fix ixgbe_set_ringparam, clear xdp_rxq_info in temp_ring Cc: intel-wired-lan@lists.osuosl.org Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-10-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-10-09ixgbe: add counter for times Rx pages gets allocated, not recycledJesper Dangaard Brouer
The ixgbe driver have page recycle scheme based around the RX-ring queue, where a RX page is shared between two packets. Based on the refcnt, the driver can determine if the RX-page is currently only used by a single packet, if so it can then directly refill/recycle the RX-slot by with the opposite "side" of the page. While this is a clever trick, it is hard to determine when this recycling is successful and when it fails. Adding a counter, which is available via ethtool --statistics as 'alloc_rx_page'. Which counts the number of times the recycle fails and the real page allocator is invoked. When interpreting the stats, do remember that every alloc will serve two packets. The counter is collected per rx_ring, but is summed and ethtool exported as 'alloc_rx_page'. It would be relevant to know what rx_ring that cannot keep up, but that can be exported later if someone experience a need for this. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-09ixgbe: split Tx/Rx ring clearing for ethtool loopback testEmil Tantilov
Commit: fed21bcee7a5 ("ixgbe: Don't bother clearing buffer memory for descriptor rings) exposed some issues with the logic in the current implementation of ixgbe_clean_test_rings() that are being addressed in this patch: - Split the clearing of the Tx and Rx rings in separate loops. Previously both Tx and Rx rings were cleared in a rx_desc->wb.upper.length based loop which could lead to issues if for w/e reason packets were received outside of the frames transmitted for the loopback test. - Add check for IXGBE_TXD_STAT_DD to avoid clearing the rings if the transmits have not comlpeted by the time we enter ixgbe_clean_test_rings() - Exit early on ixgbe_check_lbtest_frame() failure. This change fixes a crash during ethtool diagnostic (ethtool -t). Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-09ixgbe: incorrect XDP ring accounting in ethtool tx_frame paramJohn Fastabend
Changing the TX ring parameters with an XDP program attached may cause the XDP queues to be cleared and the TX rings to be incorrectly configured. Fix by doing correct ring accounting in setup call. Fixes: 33fdc82f0883 ("ixgbe: add support for XDP_TX action") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-13ixgbe: Resolve cppcheck format string warningTony Nguyen
cppcheck warns that the format string is incorrect in the function ixgbe_get_strings(). Since the value cannot be negative, change the variable to unsigned which matches the format specifier. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-13ixgbe: add statistic indicating number of skipped Tx timestampsJacob Keller
The ixgbe driver can only handle one Tx timestamp request at a time. This means it is possible for an application timestamp request to be ignored. There is no easy way for an administrator to determine if this occurred. Add a new statistic which tracks this, tx_hwtstamp_skipped. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: Resolve warnings for -Wimplicit-fallthroughTony Nguyen
This patch adds/changes fall through comments to address new warnings produced by gcc 7. Fixed formatting on a couple of comments in the function. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: Remove MAC X550EM_X 1Gbase-t led_[on|off] supportPaul Greenwalt
Since FW configures the PHY and MAC X550EM_X has no PHY access, led_[on|off] is not supported with the 1Gbase-t design. Removed MAC X550EM_X 1Gbase-t led_[on|off] support by setting function pointers to NULL and added NULL pointer checks. Also set init_led_link_act to NULL and added NULL pointer check. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbe: Check for RSS key before setting valueTony Nguyen
The RSS key is being repopulated every time the interface is brought up regardless of whether there is an existing value. If the user sets the RSS key and the interface is brought up (e.g. reset), the user specified RSS key will be overwritten. This patch changes the rss_key to a pointer so we can check to see if the key has been populated and preserve it accordingly. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbe: add support for XDP_TX actionJohn Fastabend
A couple design choices were made here. First I use a new ring pointer structure xdp_ring[] in the adapter struct instead of pushing the newly allocated XDP TX rings into the tx_ring[] structure. This means we have to duplicate loops around rings in places we want to initialize both TX rings and XDP rings. But by making it explicit it is obvious when we are using XDP rings and when we are using TX rings. Further we don't have to do ring arithmatic which is error prone. As a proof point for doing this my first patches used only a single ring structure and introduced bugs in FCoE code and macvlan code paths. Second I am aware this is not the most optimized version of this code possible. I want to get baseline support in using the most readable format possible and then once this series is included I will optimize the TX path in another series of patches. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbe: add XDP support for pass and drop actionsJohn Fastabend
Basic XDP drop support for ixgbe. Uses READ_ONCE/xchg semantics on XDP programs instead of RCU primitives as suggested by Daniel Borkmann and Alex Duyck. v2: fix the build issues seen w/ XDP when page sizes are larger than 4K and made minor fixes based on feedback from Jakub Kicinski Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-18ixgbe: Add X552 XFI backplane supportDon Skidmore
This patch add support for X552 XFI backplane interface. The XFI backplane requires a custom tuned link. HW/FW owns the link config for XF backplane and SW must not interfere with it. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-12net: intel: ixgbe: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-02ixgbe: update the rss key on h/w, when ethtool ask for itPaolo Abeni
Currently ixgbe_set_rxfh() updates the rss_key copy in the driver memory, but does not push the new value into the h/w. This commit add a new helper for the latter operation and call it in ixgbe_set_rxfh(), so that the h/w rss key value can be really updated via ethtool. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Don't bother clearing buffer memory for descriptor ringsAlexander Duyck
This patch makes it so that we don't need to bother with clearing the memory out for the descriptor rings. The general idea is to only free buffers associated with buffers in use which are located between the next_to_clean and next_to_use or next_to_alloc values. Everything outside of those regions can be safely ignored since they should have no buffers associated with them. The advantage to doing things this way is that is should speed up bring-up and tear-down of the rings. Specifically we can avoid the 512 or more cycles required to memset the rings in tear-down. In the bring-up phase we then clear the memory as a part of initialization. The general idea is that the clearing in initialization can act as a prefetch of sorts for the buffer info structures so they are in the local CPU when we go to populate them. This should help to improve overall time needed to perform a suspend/resume. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Add private flag to control buffer modeAlexander Duyck
Since there are potential drawbacks to the new Rx allocation approach I thought it best to add a "chicken bit" so that we can turn the feature off if in the event that a problem is found. It also provides a means of validating the legacy Rx path in the event that we are forced to fall back. At some point in the future when we are convinced we don't need it anymore we might be able to drop the legacy-rx flag. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Use length to determine if descriptor is doneAlexander Duyck
This change makes it so that we use the length of the packet instead of the DD status bit to determine if a new descriptor is ready to be processed. The obvious advantage is that it cuts down on reads as we don't really even need the DD bit if going from a 0 to a non-zero value on size is enough to inform us that the packet has been completed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-16ixgbe: Support 2.5Gb and 5Gb speedTony Nguyen
Though not advertised through ethtool, if the link partner advertises a 2.5Gb or 5Gb connection, and the adapter supports it, allow the speed to be used. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-03ixgbe: get rid of custom busy polling codeEric Dumazet
In linux-4.5, busy polling was implemented in core NAPI stack, meaning that all custom implementation can be removed from drivers. Not only we remove lot's of code, we also remove one lock operation in fast path, and allow GRO to do its job. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03ixgbe: Implement support for firmware-controlled PHYsMark Rustad
Implement support for devices that have firmware-controlled PHYs. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Fix reporting of 100Mb capabilityTony Nguyen
BaseT adapters that are capable of supporting 100Mb are not reporting this capability. This patch corrects the reporting so that 100Mb is shown as supported on those adapters. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-11-04ixgbe: Add support to retrieve and store LED link activeDon Skidmore
This patch adds support to get the LED link active via the LEDCTL register. If the LEDCTL register does not have LED link active (LED mode field = 0x0100) set then default LED link active returned. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-23ixgbe: Limit reporting of redirection table if SR-IOV is enabledAlexander Duyck
The hardware redirection table can support more queues then the PF currently has when SR-IOV is enabled. In order to account for this use the RSS mask to trim of the bits that are not used. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-23ixgbe: Allow setting multiple queues when SR-IOV is enabledAlexander Duyck
The maximum queue count reported was 1, however support for multiple queues with SR-IOV was added some time ago so we should report support for it to the user so that they can select multiple queues if they so desire. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-23ixgbe: Indicate support for pause frames in all casesMark Rustad
All the MACs supported by ixgbe support pause frames, so indicate that support in ethtool. Also set advertising according to requested mode. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-20ixgbe: report correct media type for KR, KX and KX4 interfacesVeola Nazareth
ethtool reports backplane type interfaces as 1000/10000baseT link modes. This has been corrected to report the media as KR, KX or KX4 based on the backplane interface present. Signed-off-by: Veola Nazareth <veola.nazareth@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: Correct parameter sent to LED functionDon Skidmore
The second parameter of these functions is the index to the led we are interested in affecting. However we were mistakenly passing the offset in the register. This patch corrects that and adds some bonds checking which would hopefully make bugs like this more noticeable in the future. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-29ixgbe: Correct reporting of timestamping for x550Tony Nguyen
Update ixgbe_ethtool_get_ts_info() to show that x550 supports hardware timestamping of all packets. Reported-by: Guy Harris <guy@alum.mit.edu> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: Revise populating few registers and macro definitionsPreethi Banala
Revise populating few registers in ixgbe_get_regs() and macro definitions. Before applying patch: $ du -k objs/drivers/net/ethernet/intel/ixgbe/ixgbe.ko 8572 objs/drivers/net/ethernet/intel/ixgbe/ixgbe.ko After applying patch: $ du -k objs/drivers/net/ethernet/intel/ixgbe/ixgbe.ko 8568 objs/drivers/net/ethernet/intel/ixgbe/ixgbe.ko Signed-off-by: Preethi Banala <preethi.banala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-04ixgbe: Return 64 bit stats valuesPreethi Banala
The code was ignoring higher 32 bits of stats registers. This patch correctly fills out 64 bit value in two 32 bit words. Signed-off-by: Preethi Banala <preethi.banala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: use BIT() macroJacob Keller
Several areas of ixgbe were written before widespread usage of the BIT(n) macro. With the impending release of GCC 6 and its associated new warnings, some usages such as (1 << 31) have been noted within the ixgbe driver source. Fix these wholesale and prevent future issues by simply using BIT macro instead of hand coded bit shifts. Also fix a few shifts that are shifting values into place by using the 'u' prefix to indicate unsigned. It doesn't strictly matter in these cases because we're not shifting by too large a value, but these are all unsigned values and should be indicated as such. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07ixgbe: Add support for x550em_a 10G MAC typeMark Rustad
Add support for x550em_a 10G MAC type to the ixgbe driver. The new MAC includes new firmware commands that need to be used to control PHY and IOSF access, so that support is also added. The interface supported is a native SFP+ interface. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-17 13:51:27 +0000