| Age | Commit message (Collapse) | Author |
|---|
|
|
|
commit c0689e46be23160d925dca95dfc411f1a0462708 upstream.
Commit effa453168a7 ("i2c: i801: Don't silently correct invalid transfer
size") revealed that ee1004_eeprom_read() did not properly limit how
many bytes to read at once.
In particular, i2c_smbus_read_i2c_block_data_or_emulated() takes the
length to read as an u8. If count == 256 after taking into account the
offset and page boundary, the cast to u8 overflows. And this is common
when user space tries to read the entire EEPROM at once.
To fix it, limit each read to I2C_SMBUS_BLOCK_MAX (32) bytes, already
the maximum length i2c_smbus_read_i2c_block_data_or_emulated() allows.
Fixes: effa453168a7 ("i2c: i801: Don't silently correct invalid transfer size")
Cc: stable@vger.kernel.org
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jonas Malaco <jonas@protocubo.io>
Link: https://lore.kernel.org/r/20220203165024.47767-1-jonas@protocubo.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 46963e2e0629cb31c96b1d47ddd89dc3d8990b34 ]
If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF
ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact,
dma_buf_fd() called fd_install() before, i.e. "consumed" one reference,
leaving us with none.
Calling dma_buf_put() will therefore put a reference we no longer own,
leading to a valid file descritor table entry for an already released
'file' object which is a straight use-after-free.
Simply avoid calling dma_buf_put() and rely on the process exit code to
do the necessary cleanup, if needed, i.e. if the file descriptor is
still valid.
Fixes: 6cffd79504ce ("misc: fastrpc: Add support for dmabuf exporter")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20220127130218.809261-1-minipli@grsecurity.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
[ Upstream commit fcee5ce50bdb21116711e38635e3865594af907e ]
When firmware load failed, kernel report task hung as follows:
INFO: task xrun:5191 blocked for more than 147 seconds.
Tainted: G W 5.16.0-rc5-next-20211220+ #11
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:xrun state:D stack: 0 pid: 5191 ppid: 270 flags:0x00000004
Call Trace:
__schedule+0xc12/0x4b50 kernel/sched/core.c:4986
schedule+0xd7/0x260 kernel/sched/core.c:6369 (discriminator 1)
schedule_timeout+0x7aa/0xa80 kernel/time/timer.c:1857
wait_for_completion+0x181/0x290 kernel/sched/completion.c:85
lattice_ecp3_remove+0x32/0x40 drivers/misc/lattice-ecp3-config.c:221
spi_remove+0x72/0xb0 drivers/spi/spi.c:409
lattice_ecp3_remove() wait for signals from firmware loading, but when
load failed, firmware_load() does not send this signal. This cause
device remove hung. Fix it by sending signal even if load failed.
Fixes: 781551df57c7 ("misc: Add Lattice ECP3 FPGA configuration via SPI")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20211228125522.3122284-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit bc93a22a19eb2b68a16ecf04cdf4b2ed65aaf398 upstream.
On a kernel without CONFIG_STRICT_KERNEL_RWX, running EXEC_RODATA
test leads to "Illegal instruction" failure.
Looking at the content of rodata_objcopy.o, we see that the
function content zeroes only:
Disassembly of section .rodata:
0000000000000000 <.lkdtm_rodata_do_nothing>:
0: 00 00 00 00 .long 0x0
Add the contents flag in order to keep the content of the section
while renaming it.
Disassembly of section .rodata:
0000000000000000 <.lkdtm_rodata_do_nothing>:
0: 4e 80 00 20 blr
Fixes: e9e08a07385e ("lkdtm: support llvm-objcopy")
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/8900731fbc05fb8b0de18af7133a8fc07c3c53a1.1633712176.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
commit 3a1bf591e9a410f220b7405a142a47407394a1d5 upstream.
The buffer list is sorted and this is not being considered while
calculating packet size. This would lead to improper copy length
calculation for non-dmaheap buffers which would eventually cause
sending improper buffers to DSP.
Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Jeya R <jeyr@codeaurora.org>
Link: https://lore.kernel.org/r/1637771481-4299-1-git-send-email-jeyr@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
commit 42641042c10c757fe10cc09088cf3f436cec5007 upstream.
clang-14 complains about an unusual way of converting a pointer to
an integer:
drivers/misc/cb710/sgbuf2.c:50:15: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction]
return ((ptr - NULL) & 3) != 0;
Replace this with a normal cast to uintptr_t.
Fixes: 5f5bac8272be ("mmc: Driver for CB710/720 memory card reader (MMC part)")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210927121408.939246-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 75c10c5e7a715550afdd51ef8cfd1d975f48f9e1 upstream.
Add Ice Lake-N device ID.
The device can be found on MacBookPro16,2 [1].
[1]: https://linux-hardware.org/?probe=f1c5cf0c43
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211001173644.16068-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
commit a30dc6cf0dc51419021550152e435736aaef8799 upstream.
I got a NULL pointer dereference report when doing fuzz test:
Call Trace:
qp_release_pages+0xae/0x130
qp_host_unregister_user_memory.isra.25+0x2d/0x80
vmci_qp_broker_unmap+0x191/0x320
? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
vmci_host_unlocked_ioctl+0x59f/0xd50
? do_vfs_ioctl+0x14b/0xa10
? tomoyo_file_ioctl+0x28/0x30
? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
__x64_sys_ioctl+0xea/0x120
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
When a queue pair is created by the following call, it will not
register the user memory if the page_store is NULL, and the
entry->state will be set to VMCIQPB_CREATED_NO_MEM.
vmci_host_unlocked_ioctl
vmci_host_do_alloc_queuepair
vmci_qp_broker_alloc
qp_broker_alloc
qp_broker_create // set entry->state = VMCIQPB_CREATED_NO_MEM;
When unmapping this queue pair, qp_host_unregister_user_memory() will
be called to unregister the non-existent user memory, which will
result in a null pointer reference. It will also change
VMCIQPB_CREATED_NO_MEM to VMCIQPB_CREATED_MEM, which should not be
present in this operation.
Only when the qp broker has mem, it can unregister the user
memory when unmapping the qp broker.
Only when the qp broker has no mem, it can register the user
memory when mapping the qp broker.
Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.")
Cc: stable <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20210818124845.488312-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
commit 281e468446994a7672733af2bf941f4110d4a895 upstream.
This patch fixes a trivial mistake that I made in the previous attempt
in fixing the null bridge issue. The branch condition is inverted and we
should call alcor_pci_find_cap_offset() only if bridge is not null.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 3ce3e45cc333 ("misc: alcor_pci: fix null-ptr-deref when there is no PCI bridge")
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210522043725.602179-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3ce3e45cc333da707d4d6eb433574b990bcc26f5 ]
There is an issue with the ASPM(optional) capability checking function.
A device might be attached to root complex directly, in this case,
bus->self(bridge) will be NULL, thus priv->parent_pdev is NULL.
Since alcor_pci_init_check_aspm(priv->parent_pdev) checks the PCI link's
ASPM capability and populate parent_cap_off, which will be used later by
alcor_pci_aspm_ctrl() to dynamically turn on/off device, what we can do
here is to avoid checking the capability if we are on the root complex.
This will make pdev_cap_off 0 and alcor_pci_aspm_ctrl() will simply
return when bring called, effectively disable ASPM for the device.
[ 1.246492] BUG: kernel NULL pointer dereference, address: 00000000000000c0
[ 1.248731] RIP: 0010:pci_read_config_byte+0x5/0x40
[ 1.253998] Call Trace:
[ 1.254131] ? alcor_pci_find_cap_offset.isra.0+0x3a/0x100 [alcor_pci]
[ 1.254476] alcor_pci_probe+0x169/0x2d5 [alcor_pci]
Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210513040732.1310159-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7272b591c4cb9327c43443f67b8fbae7657dd9ae ]
In ibmasm_init_one, it calls ibmasm_init_remote_input_dev().
Inside ibmasm_init_remote_input_dev, mouse_dev and keybd_dev are
allocated by input_allocate_device(), and assigned to
sp->remote.mouse_dev and sp->remote.keybd_dev respectively.
In the err_free_devices error branch of ibmasm_init_one,
mouse_dev and keybd_dev are freed by input_free_device(), and return
error. Then the execution runs into error_send_message error branch
of ibmasm_init_one, where ibmasm_free_remote_input_dev(sp) is called
to unregister the freed sp->remote.mouse_dev and sp->remote.keybd_dev.
My patch add a "error_init_remote" label to handle the error of
ibmasm_init_remote_input_dev(), to avoid the uaf bugs.
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Link: https://lore.kernel.org/r/20210426170620.10546-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
[ Upstream commit e0db3deea73ba418bf5dc21f5a4e32ca87d16dde ]
When iterating over child firmware nodes restore printing the name of ones
that are not supported.
While at it, refactor loop body to clearly show that we stop at the first match.
Fixes: db15d73e5f0e ("eeprom: idt_89hpesx: Support both ACPI and OF probing")
Cc: Huy Duong <qhuyduong@hotmail.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210607221757.81465-2-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3f6ee1c095156a74ab2df605af13020f1ce3e600 ]
device_get_next_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.
Fixes: db15d73e5f0e ("eeprom: idt_89hpesx: Support both ACPI and OF probing")
Cc: Huy Duong <qhuyduong@hotmail.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210607221757.81465-1-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
[ Upstream commit 79d341e26ebcdbc622348aaaab6f8f89b6fdb25f ]
hp_accel can take almost two seconds to resume on some HP laptops.
The bottleneck is on evaluating _INI, which is only needed to run once.
Resolve the issue by only invoking _INI when it's necessary. Namely, on
probe and on hibernation restore.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Éric Piel <eric.piel@trempplin-utc.net>
Link: https://lore.kernel.org/r/20210430060736.590321-1-kai.heng.feng@canonical.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit bbf0a94744edfeee298e4a9ab6fd694d639a5cdf upstream.
A rx flow control waiting in the control queue may block autosuspend.
Re-request autosuspend after flow control been sent to unblock
the transition to the low power state.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210526193334.445759-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bda7d3ab06f19c02dcef61fefcb9dd954dfd5e4f upstream.
40cc3a80bb42 ("kgdb: fix gcc-11 warning on indentation") tried to fix up
the gcc-11 complaints in this file by just reformatting the #defines.
That worked for gcc 11.1.0, but in gcc 11.1.1 as shipped by Fedora 34,
the warning came back for one of the #defines.
Fix this up again by putting { } around the if statement, now it is
quiet again.
Fixes: 40cc3a80bb42 ("kgdb: fix gcc-11 warning on indentation")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: https://lore.kernel.org/r/20210520130839.51987-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
|
|
commit a73b6a3b4109ce2ed01dbc51a6c1551a6431b53c upstream.
In commit b05ae01fdb89, someone tried to make the driver handle i2c read
errors by simply zeroing out the register contents, but for some reason
left unaltered the code that sets the cached register value the function
call return value.
The original patch was authored by a member of the Underhanded
Mangle-happy Nerds, I'm not terribly surprised. I don't have the
hardware anymore so I can't test this, but it seems like a pretty
obvious API usage fix to me...
Fixes: b05ae01fdb89 ("misc/ics932s401: Add a missing check to i2c_smbus_read_word_data")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210428222534.GJ3122264@magnolia
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 40cc3a80bb42587db1e6ae21d6f3090582d33e89 upstream.
gcc-11 starts warning about misleading indentation inside of macros:
drivers/misc/kgdbts.c: In function ‘kgdbts_break_test’:
drivers/misc/kgdbts.c:103:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
103 | if (verbose > 1) \
| ^~
drivers/misc/kgdbts.c:200:9: note: in expansion of macro ‘v2printk’
200 | v2printk("kgdbts: breakpoint complete\n");
| ^~~~~~~~
drivers/misc/kgdbts.c:105:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
105 | touch_nmi_watchdog(); \
| ^~~~~~~~~~~~~~~~~~
The code looks correct to me, so just reindent it for readability.
Fixes: e8d31c204e36 ("kgdb: add kgdb internal test suite")
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210322164308.827846-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
commit b2192cfeba8481224da0a4ec3b4a7ccd80b1623b upstream.
KMSAN complains that vmci_check_host_caps() left the payload part of
check_msg uninitialized.
=====================================================
BUG: KMSAN: uninit-value in kmsan_check_memory+0xd/0x10
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G B 5.11.0-rc7+ #4
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
Call Trace:
dump_stack+0x21c/0x280
kmsan_report+0xfb/0x1e0
kmsan_internal_check_memory+0x202/0x520
kmsan_check_memory+0xd/0x10
iowrite8_rep+0x86/0x380
vmci_guest_probe_device+0xf0b/0x1e70
pci_device_probe+0xab3/0xe70
really_probe+0xd16/0x24d0
driver_probe_device+0x29d/0x3a0
device_driver_attach+0x25a/0x490
__driver_attach+0x78c/0x840
bus_for_each_dev+0x210/0x340
driver_attach+0x89/0xb0
bus_add_driver+0x677/0xc40
driver_register+0x485/0x8e0
__pci_register_driver+0x1ff/0x350
vmci_guest_init+0x3e/0x41
vmci_drv_init+0x1d6/0x43f
do_one_initcall+0x39c/0x9a0
do_initcall_level+0x1d7/0x259
do_initcalls+0x127/0x1cb
do_basic_setup+0x33/0x36
kernel_init_freeable+0x29a/0x3ed
kernel_init+0x1f/0x840
ret_from_fork+0x1f/0x30
Uninit was created at:
kmsan_internal_poison_shadow+0x5c/0xf0
kmsan_slab_alloc+0x8d/0xe0
kmem_cache_alloc+0x84f/0xe30
vmci_guest_probe_device+0xd11/0x1e70
pci_device_probe+0xab3/0xe70
really_probe+0xd16/0x24d0
driver_probe_device+0x29d/0x3a0
device_driver_attach+0x25a/0x490
__driver_attach+0x78c/0x840
bus_for_each_dev+0x210/0x340
driver_attach+0x89/0xb0
bus_add_driver+0x677/0xc40
driver_register+0x485/0x8e0
__pci_register_driver+0x1ff/0x350
vmci_guest_init+0x3e/0x41
vmci_drv_init+0x1d6/0x43f
do_one_initcall+0x39c/0x9a0
do_initcall_level+0x1d7/0x259
do_initcalls+0x127/0x1cb
do_basic_setup+0x33/0x36
kernel_init_freeable+0x29a/0x3ed
kernel_init+0x1f/0x840
ret_from_fork+0x1f/0x30
Bytes 28-31 of 36 are uninitialized
Memory access of size 36 starts at ffff8881675e5f00
=====================================================
Fixes: 1f166439917b69d3 ("VMCI: guest side driver implementation.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/20210402121742.3917-2-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 376565b9717c30cd58ad33860fa42697615fa2e4 upstream.
KMSAN complains that the vmci_use_ppn64() == false path in
vmci_dbell_register_notification_bitmap() left upper 32bits of
bitmap_set_msg.bitmap_ppn64 member uninitialized.
=====================================================
BUG: KMSAN: uninit-value in kmsan_check_memory+0xd/0x10
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.11.0-rc7+ #4
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
Call Trace:
dump_stack+0x21c/0x280
kmsan_report+0xfb/0x1e0
kmsan_internal_check_memory+0x484/0x520
kmsan_check_memory+0xd/0x10
iowrite8_rep+0x86/0x380
vmci_send_datagram+0x150/0x280
vmci_dbell_register_notification_bitmap+0x133/0x1e0
vmci_guest_probe_device+0xcab/0x1e70
pci_device_probe+0xab3/0xe70
really_probe+0xd16/0x24d0
driver_probe_device+0x29d/0x3a0
device_driver_attach+0x25a/0x490
__driver_attach+0x78c/0x840
bus_for_each_dev+0x210/0x340
driver_attach+0x89/0xb0
bus_add_driver+0x677/0xc40
driver_register+0x485/0x8e0
__pci_register_driver+0x1ff/0x350
vmci_guest_init+0x3e/0x41
vmci_drv_init+0x1d6/0x43f
do_one_initcall+0x39c/0x9a0
do_initcall_level+0x1d7/0x259
do_initcalls+0x127/0x1cb
do_basic_setup+0x33/0x36
kernel_init_freeable+0x29a/0x3ed
kernel_init+0x1f/0x840
ret_from_fork+0x1f/0x30
Local variable ----bitmap_set_msg@vmci_dbell_register_notification_bitmap created at:
vmci_dbell_register_notification_bitmap+0x50/0x1e0
vmci_dbell_register_notification_bitmap+0x50/0x1e0
Bytes 28-31 of 32 are uninitialized
Memory access of size 32 starts at ffff88810098f570
=====================================================
Fixes: 83e2ec765be03e8a ("VMCI: doorbell implementation.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/20210402121742.3917-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3641762c1c9c7cfd84a7061a0a73054f09b412e3 upstream.
Before this commit lis3lv02d_get_pwron_wait() had a WARN_ONCE() to catch
a potential divide by 0. WARN macros should only be used to catch internal
kernel bugs and that is not the case here. We have been receiving a lot of
bug reports about kernel backtraces caused by this WARN.
The div value being checked comes from the lis3->odrs[] array. Which
is sized to be a power-of-2 matching the number of bits in lis3->odr_mask.
The only lis3 model where this array is not entirely filled with non zero
values. IOW the only model where we can hit the div == 0 check is the
3dc ("8 bits 3DC sensor") model:
int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000};
Note the 0 value at index 0, according to the datasheet an odr index of 0
means "Power-down mode". HP typically uses a lis3 accelerometer for HDD
fall protection. What I believe is happening here is that on newer
HP devices, which only contain a SDD, the BIOS is leaving the lis3 device
powered-down since it is not used for HDD fall protection.
Note that the lis3_3dc_rates array initializer only specifies 10 values,
which matches the datasheet. So it also contains 6 zero values at the end.
Replace the WARN with a normal check, which treats an odr index of 0
as power-down and uses a normal dev_err() to report the error in case
odr index point past the initialized part of the array.
Fixes: 1510dd5954be ("lis3lv02d: avoid divide by zero due to unchecked")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=785814
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1817027
BugLink: https://bugs.centos.org/view.php?id=10720
Link: https://lore.kernel.org/r/20210217102501.31758-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
[ Upstream commit 27ac5aada024e0821c86540ad18f37edadd77d5e ]
The refcount of the "hl_fpriv" structure is not used for the control
device, and thus hl_hpriv_put() is not called when releasing this
device.
This results with no call to put_pid(), so add it explicitly in
hl_device_release_ctrl().
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
commit 20c40794eb85ea29852d7bc37c55713802a543d6 upstream.
Verify that user applications are not using the kernel RPC message
handle to restrict them from directly attaching to guest OS on the
remote subsystem. This is a port of CVE-2019-2308 fix.
Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210212192658.3476137-1-dmitry.baryshkov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 65527a51c66f4edfa28602643d7dd4fa366eb826 upstream.
Export the module FDT device table to ensure the FDT compatible strings
are listed in the module alias. This help the pvpanic driver can be
loaded on boot automatically not only the ACPI device, but also the FDT
device.
Fixes: 46f934c9a12fc ("misc/pvpanic: add support to get pvpanic device info FDT")
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210218123116.207751-1-shile.zhang@linux.alibaba.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
[ Upstream commit f6f1f8e6e3eea25f539105d48166e91f0ab46dd1 ]
A dummy zero bit is sent preceding the data during a read transfer by the
Microchip 93LC46B eeprom (section 2.7 of[1]). This results in right shift
of data during a read. In order to ignore this bit a quirk can be added to
send an extra zero bit after the read address.
Add a quirk to ignore the zero bit sent before data by adding a zero bit
after the read address.
[1] - https://www.mouser.com/datasheet/2/268/20001749K-277859.pdf
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210105105817.17644-3-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
commit 2fd10bcf0310b9525b2af9e1f7aa9ddd87c3772e upstream.
syzbot found WARNING in qp_broker_alloc[1] in qp_host_alloc_queue()
when num_pages is 0x100001, giving queue_size + queue_page_size
bigger than KMALLOC_MAX_SIZE for kzalloc(), resulting order >= MAX_ORDER
condition.
queue_size + queue_page_size=0x8000d8, where KMALLOC_MAX_SIZE=0x400000.
[1]
Call Trace:
alloc_pages include/linux/gfp.h:547 [inline]
kmalloc_order+0x40/0x130 mm/slab_common.c:837
kmalloc_order_trace+0x15/0x70 mm/slab_common.c:853
kmalloc_large include/linux/slab.h:481 [inline]
__kmalloc+0x257/0x330 mm/slub.c:3959
kmalloc include/linux/slab.h:557 [inline]
kzalloc include/linux/slab.h:682 [inline]
qp_host_alloc_queue drivers/misc/vmw_vmci/vmci_queue_pair.c:540 [inline]
qp_broker_create drivers/misc/vmw_vmci/vmci_queue_pair.c:1351 [inline]
qp_broker_alloc+0x936/0x2740 drivers/misc/vmw_vmci/vmci_queue_pair.c:1739
Reported-by: syzbot+15ec7391f3d6a1a7cc7d@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Link: https://lore.kernel.org/r/20210209102612.2112247-1-snovitoll@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 920fd8a70619074eac7687352c8f1c6f3c2a64a5 upstream.
Power down OCP for power consumption
when no SD/MMC card is present
Cc: stable@vger.kernel.org
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20210204083115.9471-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3a77df62deb2e62de0dc26c1cb763cc152329287 ]
Use mei_set_devstate() wrapper upon hbm stop command response,
to trigger sysfs event.
Fixes: 43b8a7ed4739 ("mei: expose device state in sysfs")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210129120752.850325-3-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5a16c535409f8dcb7568e20737309e3027ae3e49 ]
When the VMCI host support releases guest memory in the case where
the VM was killed, the pinned guest pages aren't locked. Use
set_page_dirty_lock() instead of set_page_dirty().
Testing done: Killed VM while having an active VMCI based vSocket
connection and observed warning from ext4. With this fix, no
warning was observed. Ran various vSocket tests without issues.
Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.")
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/1611160360-30299-1-git-send-email-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
device tree users
[ Upstream commit 4540b9fbd8ebb21bb3735796d300a1589ee5fbf2 ]
Module alias "spi:93xx46" is used by non device tree users like
drivers/misc/eeprom/digsy_mtc_eeprom.c and removing it will
break support for them.
Fix this by adding back the module alias "spi:93xx46".
Fixes: 13613a2246bf ("misc: eeprom_93xx46: Fix module alias to enable module autoprobe")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210113051253.15061-1-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 13613a2246bf531f5fc04e8e62e8f21a3d39bf1c ]
Fix module autoprobe by correcting module alias to match the string from
/sys/class/.../spi1.0/modalias content.
Fixes: 06b4501e88ad ("misc/eeprom: add driver for microwire 93xx46 EEPROMs")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210107163957.28664-2-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
[ Upstream commit 3f618ab3323407ee4c6a6734a37eb6e9663ebfb9 ]
When building with KASAN and LKDTM, clang may implictly generate an
asan.module_ctor function in the LKDTM rodata object. The Makefile moves
the lkdtm_rodata_do_nothing() function into .rodata by renaming the
file's .text section to .rodata, and consequently also moves the ctor
function into .rodata, leading to a boot time crash (splat below) when
the ctor is invoked by do_ctors().
Let's prevent this by marking the function as noinstr rather than
notrace, and renaming the file's .noinstr.text to .rodata. Marking the
function as noinstr will prevent tracing and kprobes, and will inhibit
any undesireable compiler instrumentation.
The ctor function (if any) will be placed in .text and will work
correctly.
Example splat before this patch is applied:
[ 0.916359] Unable to handle kernel execute from non-executable memory at virtual address ffffa0006b60f5ac
[ 0.922088] Mem abort info:
[ 0.922828] ESR = 0x8600000e
[ 0.923635] EC = 0x21: IABT (current EL), IL = 32 bits
[ 0.925036] SET = 0, FnV = 0
[ 0.925838] EA = 0, S1PTW = 0
[ 0.926714] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000427b3000
[ 0.928489] [ffffa0006b60f5ac] pgd=000000023ffff003, p4d=000000023ffff003, pud=000000023fffe003, pmd=0068000042000f01
[ 0.931330] Internal error: Oops: 8600000e [#1] PREEMPT SMP
[ 0.932806] Modules linked in:
[ 0.933617] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-rc7 #2
[ 0.935620] Hardware name: linux,dummy-virt (DT)
[ 0.936924] pstate: 40400005 (nZcv daif +PAN -UAO -TCO BTYPE=--)
[ 0.938609] pc : asan.module_ctor+0x0/0x14
[ 0.939759] lr : do_basic_setup+0x4c/0x70
[ 0.940889] sp : ffff27b600177e30
[ 0.941815] x29: ffff27b600177e30 x28: 0000000000000000
[ 0.943306] x27: 0000000000000000 x26: 0000000000000000
[ 0.944803] x25: 0000000000000000 x24: 0000000000000000
[ 0.946289] x23: 0000000000000001 x22: 0000000000000000
[ 0.947777] x21: ffffa0006bf4a890 x20: ffffa0006befb6c0
[ 0.949271] x19: ffffa0006bef9358 x18: 0000000000000068
[ 0.950756] x17: fffffffffffffff8 x16: 0000000000000000
[ 0.952246] x15: 0000000000000000 x14: 0000000000000000
[ 0.953734] x13: 00000000838a16d5 x12: 0000000000000001
[ 0.955223] x11: ffff94000da74041 x10: dfffa00000000000
[ 0.956715] x9 : 0000000000000000 x8 : ffffa0006b60f5ac
[ 0.958199] x7 : f9f9f9f9f9f9f9f9 x6 : 000000000000003f
[ 0.959683] x5 : 0000000000000040 x4 : 0000000000000000
[ 0.961178] x3 : ffffa0006bdc15a0 x2 : 0000000000000005
[ 0.962662] x1 : 00000000000000f9 x0 : ffffa0006bef9350
[ 0.964155] Call trace:
[ 0.964844] asan.module_ctor+0x0/0x14
[ 0.965895] kernel_init_freeable+0x158/0x198
[ 0.967115] kernel_init+0x14/0x19c
[ 0.968104] ret_from_fork+0x10/0x30
[ 0.969110] Code: 00000003 00000000 00000000 00000000 (00000000)
[ 0.970815] ---[ end trace b5339784e20d015c ]---
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20201207170533.10738-1-mark.rutland@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
[ Upstream commit b000700d6db50c933ce8b661154e26cf4ad06dba ]
When kzalloc() fails, we should execute hl_mmu_fini()
to release the MMU module. It's the same when
hl_ctx_init() fails.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
Bruce Ashfield
Jonas Malaco
Mathias Krause
Wei Yongjun
Christophe Leroy
Jeya R
Arnd Bergmann
Andy Shevchenko
Wang Hai
Tong Zhang
Lv Yunlong
Andy Shevchenko
Kai-Heng Feng
Alexander Usyskin
Greg Kroah-Hartman
Darrick J. Wong
Tetsuo Handa
Hans de Goede
Tomer Tayar
Dmitry Baryshkov
Shile Zhang
Aswath Govindraju
Sabyrzhan Tasbolatov
Ricky Wu
Jorgen Hansen
Mark Rutland
Dinghao Liu