summaryrefslogtreecommitdiffstats
path: root/drivers/media/rc
AgeCommit message (Collapse)Author
2021-03-11media: rc: compile rc-cec.c into rc-coreHans Verkuil
The rc-cec keymap is unusual in that it can't be built as a module, instead it is registered directly in rc-main.c if CONFIG_MEDIA_CEC_RC is set. This is because it can be called from drm_dp_cec_set_edid() via cec_register_adapter() in an asynchronous context, and it is not allowed to use request_module() to load rc-cec.ko in that case. Trying to do so results in a 'WARN_ON_ONCE(wait && current_is_async())'. Since this keymap is only used if CONFIG_MEDIA_CEC_RC is set, we just compile this keymap into the rc-core module and never as a separate module. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 2c6d1fffa1d9 (drm: add support for DisplayPort CEC-Tunneling-over-AUX) Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-01Merge tag 'v5.11-rc6' into patchworkMauro Carvalho Chehab
Linux 5.11-rc6 * tag 'v5.11-rc6': (1466 commits) Linux 5.11-rc6 leds: rt8515: Add Richtek RT8515 LED driver dt-bindings: leds: Add DT binding for Richtek RT8515 leds: trigger: fix potential deadlock with libata leds: leds-ariel: convert comma to semicolon leds: leds-lm3533: convert comma to semicolon dt-bindings: Cleanup standard unit properties soc: litex: Properly depend on HAS_IOMEM tty: avoid using vfs_iocb_iter_write() for redirected console writes null_blk: cleanup zoned mode initialization cifs: fix dfs domain referrals drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors drm/nouveau/kms/nv50-: Report max cursor size to userspace drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices drm/nouveau/dispnv50: Restore pushing of all data. io_uring: reinforce cancel on flush during exit cifs: returning mount parm processing errors correctly rxrpc: Fix memory leak in rxrpc_lookup_local mlxsw: spectrum_span: Do not overwrite policer configuration ...
2021-01-27media: rc: select CONFIG_BITREVERSE where neededArnd Bergmann
A number of remote control drivers require the bitreverse helper, and run into a link error when it is disabled: arm-linux-gnueabi-ld: drivers/media/rc/img-ir/img-ir-nec.o: in function `img_ir_nec_scancode': img-ir-nec.c:(.text+0x10c): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: drivers/media/rc/img-ir/img-ir-nec.o: in function `img_ir_nec_filter': img-ir-nec.c:(.text+0x2dc): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: drivers/media/usb/cx231xx/cx231xx-input.o: in function `get_key_isdbt': cx231xx-input.c:(.text+0x38c): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: drivers/media/usb/em28xx/em28xx-input.o: in function `em28xx_get_key_em_haup': em28xx-input.c:(.text+0x1704): undefined reference to `byte_rev_table' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27media: mceusb: sanity check for prescaler valueSean Young
prescaler larger than 8 would mean the carrier is at most 152Hz, which does not make sense for IR carriers. Reported-by: syzbot+6d31bf169a8265204b8d@syzkaller.appspotmail.com Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27media: sunxi-cir: Implement suspend/resume/shutdown callbacksSamuel Holland
To save power, gate/reset the hardware block while the system is asleep or powered off. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27media: sunxi-cir: Factor out hardware initializationSamuel Holland
In preparation for adding suspend/resume hooks, factor out the hardware initialization from the driver probe/remove functions. The timeout programmed during init is taken from the `struct rc_dev` so it is maintained across an exit/init cycle. This resolves some trivial issues with the probe function: throwing away the error from clk_prepare_enable and using the wrong type for the temporary register value. It also fixes the order of the remove function to unregister the RC device before turning off the hardware. This prevents userspace from triggering register writes (via LIRC_SET_REC_TIMEOUT) while the hardware is disabled. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27media: sunxi-cir: Remove unnecessary spinlockSamuel Holland
Only one register, SUNXI_IR_CIR_REG, is accessed from outside the interrupt handler, and that register is not accessed from inside it. As there is no overlap between different contexts, no lock is needed. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27media: sunxi-cir: Clean up dead register writesSamuel Holland
The register writes during driver removal occur after the device is already put back in reset, so they never had any effect. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-14media: mceusb: Fix potential out-of-bounds shiftJames Reynolds
When processing a MCE_RSP_GETPORTSTATUS command, the bit index to set in ir->txports_cabled comes from response data, and isn't validated. As ir->txports_cabled is a u8, nothing should be done if the bit index is greater than 7. Cc: stable@vger.kernel.org Reported-by: syzbot+ec3b3128c576e109171d@syzkaller.appspotmail.com Signed-off-by: James Reynolds <jr@memlen.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-14media: ir_toy: add another IR Droid deviceSean Young
This device is also supported. Cc: stable@vger.kernel.org Tested-by: Georgi Bakalski <georgi.bakalski@gmail.com> Reported-by: Georgi Bakalski <georgi.bakalski@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: rc: ite-cir: fix min_timeout calculationMatthias Reichl
Commit 528222d853f92 ("media: rc: harmonize infrared durations to microseconds") missed to switch the min_timeout calculation from ns to us. This resulted in a minimum timeout of 1.2 seconds instead of 1.2ms, leading to large delays and long key repeats. Fix this by applying proper ns->us conversion. Cc: stable@vger.kernel.org Fixes: 528222d853f92 ("media: rc: harmonize infrared durations to microseconds") Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-11media: rc: fix timeout handling after switch to microsecond durationsMatthias Reichl
Commit 528222d853f92 ("media: rc: harmonize infrared durations to microseconds") missed to switch some timeout calculations from nanoseconds to microseconds. This resulted in spurious key_up+key_down events at the last scancode if the rc device uses a long timeout (eg 100ms on nuvoton-cir) as the device timeout wasn't properly accounted for in the keyup timeout calculation. Fix this by applying the proper conversion functions. Cc: stable@vger.kernel.org Fixes: 528222d853f92 ("media: rc: harmonize infrared durations to microseconds") Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-04media: rc: ensure that uevent can be read directly after rc device registerSean Young
There is a race condition where if the /sys/class/rc0/uevent file is read before rc_dev->registered is set to true, -ENODEV will be returned. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901089 Cc: stable@vger.kernel.org Fixes: a2e2d73fa281 ("media: rc: do not access device via sysfs after rc_unregister_device()") Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-14Merge tag 'media/v5.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - some rework at the uAPI pixel format docs - the smiapp driver has started to gain support for MIPI CSS camera sensors and was renamed - two new sensor drivers: ov02a10 and ov9734 - Meson gained a driver for the 2D acceleration unit - Rockchip rkisp1 driver was promoted from staging - Cedrus driver gained support for VP8 - two new remote controller keymaps were added - the usual set of fixes cleanups and driver improvements * tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (447 commits) media: ccs: Add support for obtaining C-PHY configuration from firmware media: ccs-pll: Print pixel rates media: ccs: Print written register values media: ccs: Add support for DDR OP SYS and OP PIX clocks media: ccs-pll: Add support for DDR OP system and pixel clocks media: ccs: Dual PLL support media: ccs-pll: Add trivial dual PLL support media: ccs-pll: Separate VT divisor limit calculation from the rest media: ccs-pll: Fix VT post-PLL divisor calculation media: ccs-pll: Make VT divisors 16-bit media: ccs-pll: Rework bounds checks media: ccs-pll: Print relevant information on PLL tree media: ccs-pll: Better separate OP and VT sub-tree calculation media: ccs-pll: Check for derating and overrating, support non-derating sensors media: ccs-pll: Split off VT subtree calculation media: ccs-pll: Add C-PHY support media: ccs-pll: Add sanity checks media: ccs-pll: Add support flexible OP PLL pixel clock divider media: ccs-pll: Support two cycles per pixel on OP domain media: ccs-pll: Add support for extended input PLL clock divider ...
2020-12-07media: rc: add keymap for pine64 remoteJonas Karlman
Add a keymap for the pine64 IR remote [0]. The mouse key has been mapped to KEY_EPG to provide a more useful remote. [0] http://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-01media: mtk-cir: fix calculation of chk periodSean Young
Since commit 528222d853f9 ("media: rc: harmonize infrared durations to microseconds"), the calculation of the chk period is wrong. As a result, all reported IR will have incorrect timings. Now that the calculations are done in microseconds rather than nanoseconds, we can fold the calculations in a simpler form with less rounding error. Tested-by: Frank Wunderlich <frank-w@public-files.de> Fixes: 528222d853f9 ("media: rc: harmonize infrared durations to microseconds") Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-26media: rc: add keymap for KHAMSIN remoteChristian Hewitt
This remote ships with the Amlogic SML-5442TW IPTV/VOD Set-Top Box used by O2.cz. This keymap adds support for the default IR controls. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-25media: sunxi-cir: allow timeout to be set at runtimeSean Young
This allows the timeout to be set with the LIRC_SET_REC_TIMEOUT ioctl. The timeout was hardcoded at just over 20ms, but returned 120ms when queried with the LIRC_GET_REC_TIMEOUT ioctl. This also ensures the idle threshold is set correctly with a base clock other than 8Mhz. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-25media: sunxi-cir: ensure IR is handled when it is continuousSean Young
If a user holds a button down on a remote, then no ir idle interrupt will be generated until the user releases the button, depending on how quickly the remote repeats. No IR is processed until that point, which means that holding down a button may not do anything. This also resolves an issue on a Cubieboard 1 where the IR receiver is picking up ambient infrared as IR and spews out endless "rc rc0: IR event FIFO is full!" messages unless you choose to live in the dark. Cc: stable@vger.kernel.org Tested-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Maxime Ripard <mripard@kernel.org> Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-17media: rc: validate that "rc_proto" is reasonableDan Carpenter
Smatch complains that "rc_proto" comes from the user and it can result in shift wrapping in ir_raw_encode_scancode() drivers/media/rc/rc-ir-raw.c:526 ir_raw_encode_scancode() error: undefined (user controlled) shift '1 << protocol' This is true, but I reviewed the surrounding code and it appears harmless. Anyway, let's verify that "rc_proto" is valid as a kernel hardening measure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-27media: rc: gpio-ir-recv: add QoS support for cpuidle systemJoakim Zhang
GPIO IR receive is much rely on interrupt response, uneven interrupt latency will lead to incorrect timing, so the decoder fails to decode it. The issue is particularly acute on some systems which support cpuidle, not all, dynamically disable and enable cpuidle can solve this problem to a great extent. However, there is a downside to this approach, the measurement of header on the first frame may incorrect. Test on i.MX8M serials, when enable cpuidle, interrupt latency could be about 500us. With this patch: 1. has no side effect on non-cpuidle system, even runtime pm api won't be invoked to avoid a bunch of pm busy work for devices that do not need it, including spinlocks, ktime, etc. 2. latency is still much longer for the first gpio interrupt on cpuidle system, so the first frame may not be decoded. Generally, RC would transmit multiple frames at once press, we can sacrifice the first frame. 3. add "linux,autosuspend-period" property in device tree if you also suffer this cpuidle issue. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-27media: ati_remote: sanity check for both endpointsOliver Neukum
If you do sanity checks, you should do them for both endpoints. Hence introduce checking for endpoint type for the output endpoint, too. Reported-by: syzbot+998261c2ae5932458f6c@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-07Merge tag 'v5.9-rc4' into patchworkMauro Carvalho Chehab
Linux 5.9-rc4 * tag 'v5.9-rc4': (1001 commits) Linux 5.9-rc4 io_uring: fix linked deferred ->files cancellation io_uring: fix cancel of deferred reqs with ->files include/linux/log2.h: add missing () around n in roundup_pow_of_two() mm/khugepaged.c: fix khugepaged's request size in collapse_file mm/hugetlb: fix a race between hugetlb sysctl handlers mm/hugetlb: try preferred node first when alloc gigantic page from cma mm/migrate: preserve soft dirty in remove_migration_pte() mm/migrate: remove unnecessary is_zone_device_page() check mm/rmap: fixup copying of soft dirty and uffd ptes mm/migrate: fixup setting UFFD_WP flag mm: madvise: fix vma user-after-free checkpatch: fix the usage of capture group ( ... ) fork: adjust sysctl_max_threads definition to match prototype ipc: adjust proc_ipc_sem_dointvec definition to match prototype mm: track page table modifications in __apply_to_page_range() MAINTAINERS: IA64: mark Status as Odd Fixes only MAINTAINERS: add LLVM maintainers MAINTAINERS: update Cavium/Marvell entries mm: slub: fix conversion of freelist_corrupted() ...
2020-09-03Merge tag 'media/v5.9-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a compilation fix issue with ti-vpe on arm 32 bits - two Kconfig fixes for imx214 and max9286 drivers - a kernel information leak at v4l2-core on time32 compat ioctls - some fixes at rc core unbind logic - a fix at mceusb driver for it to not use GFP_ATOMIC - fixes at cedrus and vicodec drivers at the control handling logic - a fix at gpio-ir-tx to avoid disabling interruts on a spinlock * tag 'media/v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: mceusb: Avoid GFP_ATOMIC where it is not needed media: gpio-ir-tx: spinlock is not needed to disable interrupts media: rc: do not access device via sysfs after rc_unregister_device() media: rc: uevent sysfs file races with rc_unregister_device() media: max9286: Depend on OF_GPIO media: i2c: imx214: select V4L2_FWNODE media: cedrus: Add missing v4l2_ctrl_request_hdl_put() media: vicodec: add missing v4l2_ctrl_request_hdl_put() media: media/v4l2-core: Fix kernel-infoleak in video_put_user() media: ti-vpe: cal: Fix compilation on 32-bit ARM
2020-09-03media: rc: rename ir_lirc_* functions to lirc_*Sean Young
Remove pointless ir_ prefix. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-03media: rc: harmonize infrared durations to microsecondsSean Young
rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-03media: rc: rename lirc char dev region to "lirc"Sean Young
BaseRemoteCtl is not descriptive. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-03media: serial_ir: use the right type for a dma addressMauro Carvalho Chehab
As warned by smatch: drivers/media/rc/serial_ir.c:550 serial_ir_probe() warn: should '8 << ioshift' be a 64 bit type? the "8" constant should be unsigned long. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-29media: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-28media: mceusb: Avoid GFP_ATOMIC where it is not neededChristophe JAILLET
There is no point in using GFP_ATOMIC here. It is a probe function, and GFP_KERNEL is already used the line before and the line after. Use GFP_KERNEL instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-28media: gpio-ir-tx: spinlock is not needed to disable interruptsSean Young
During bit-banging the IR on a gpio pin, we cannot be scheduled or have anything interrupt us, else the generated signal will be incorrect. Therefore, we need to disable interrupts on the local cpu. This also disables preemption. local_irq_disable() does exactly what we need and does not require a spinlock. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-28media: rc: do not access device via sysfs after rc_unregister_device()Sean Young
Device drivers do not expect to have change_protocol or wakeup re-programming to be accesed after rc_unregister_device(). This can cause the device driver to access deallocated resources. Cc: <stable@vger.kernel.org> # 4.16+ Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-28media: rc: uevent sysfs file races with rc_unregister_device()Sean Young
Only report uevent file contents if device still registered, else we might read freed memory. Reported-by: syzbot+ceef16277388d6f24898@syzkaller.appspotmail.com Cc: Hillf Danton <hdanton@sina.com> Cc: <stable@vger.kernel.org> # 4.16+ Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-19media: imon: Replace http links with https onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-04media: rc: return proper error code on error handling path in initEvgeny Novikov
If lirc_dev_init() fails during module initialization, rc_core_init() returns 0 denoting success. This can cause different issues during further operation of the module. The patch fixes the return value of rc_core_init() on the corresponding error handling path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-04media: fintek-cir: remove unused function fintek_clear_reg_bitSean Young
Found with clang: drivers/media/rc/fintek-cir.c:55:20: warning: unused function 'fintek_clear_reg_bit' [-Wunused-function] static inline void fintek_clear_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg) Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-04media: nuvoton-cir: remove setting tx carrier functionsSean Young
Since this driver could never transmit IR, setting the tx carrier makes no sense. Fixes: 87284271b73b8 ("media: rc: nuvoton: remove rudimentary transmit functionality") Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-06-23media: rc: add support for Infrared Toy and IR Droid devicesSean Young
http://dangerousprototypes.com/docs/USB_Infrared_Toy https://www.irdroid.com/irdroid-usb-ir-transceiver/ Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-06-03Merge tag 'media/v5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Media documentation is now split into admin-guide, driver-api and userspace-api books (a longstanding request from Jon); - The media Kconfig was reorganized, in order to make easier to select drivers and their dependencies; - The testing drivers now has a separate directory; - added a new driver for Rockchip Video Decoder IP; - The atomisp staging driver was resurrected. It is meant to work with 4 generations of cameras on Atom-based laptops, tablets and cell phones. So, it seems worth investing time to cleanup this driver and making it in good shape. - Added some V4L2 core ancillary routines to help with h264 codecs; - Added an ov2740 image sensor driver; - The si2157 gained support for Analog TV, which, in turn, added support for some cx231xx and cx23885 boards to also support analog standards; - Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera is located at the device; - VIDIOC_ENUM_FMT was extended to support MC-centric devices; - Lots of drivers improvements and cleanups. * tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits) media: Documentation: media: Refer to mbus format documentation from CSI-2 docs media: s5k5baf: Replace zero-length array with flexible-array media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h> media: i2c: Add ov2740 image sensor driver media: ov8856: Implement sensor module revision identification media: ov8856: Add devicetree support media: dt-bindings: ov8856: Document YAML bindings media: dvb-usb: Add Cinergy S2 PCIe Dual Port support media: dvbdev: Fix tuner->demod media controller link media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property media: atomisp: unify the version for isp2401 a0 and b0 versions media: atomisp: update TODO with the current data media: atomisp: adjust some code at sh_css that could be broken media: atomisp: don't produce errs for ignored IRQs media: atomisp: print IRQ when debugging media: atomisp: isp_mmu: don't use kmem_cache media: atomisp: add a notice about possible leak resources media: atomisp: disable the dynamic and reserved pools media: atomisp: turn on camera before setting it ...
2020-05-15bpf: Implement CAP_BPFAlexei Starovoitov
Implement permissions as stated in uapi/linux/capability.h In order to do that the verifier allow_ptr_leaks flag is split into four flags and they are set as: env->allow_ptr_leaks = bpf_allow_ptr_leaks(); env->bypass_spec_v1 = bpf_bypass_spec_v1(); env->bypass_spec_v4 = bpf_bypass_spec_v4(); env->bpf_capable = bpf_capable(); The first three currently equivalent to perfmon_capable(), since leaking kernel pointers and reading kernel memory via side channel attacks is roughly equivalent to reading kernel memory with cap_perfmon. 'bpf_capable' enables bounded loops, precision tracking, bpf to bpf calls and other verifier features. 'allow_ptr_leaks' enable ptr leaks, ptr conversions, subtraction of pointers. 'bypass_spec_v1' disables speculative analysis in the verifier, run time mitigations in bpf array, and enables indirect variable access in bpf programs. 'bypass_spec_v4' disables emission of sanitation code by the verifier. That means that the networking BPF program loaded with CAP_BPF + CAP_NET_ADMIN will have speculative checks done by the verifier and other spectre mitigation applied. Such networking BPF program will not be able to leak kernel pointers and will not be able to access arbitrary kernel memory. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200513230355.7858-3-alexei.starovoitov@gmail.com
2020-05-12media: gpio-ir-tx: allow transmission without carrierSean Young
Some IR protocols do not use a carrier. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-12media: gpio-ir-tx: improve precision of transmitted signal due to schedulingSean Young
usleep_range() may take longer than the max argument due to scheduling, especially under load. This is causing random errors in the transmitted IR. Remove the usleep_range() in favour of busy-looping with udelay(). Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-29media: rc: no need for decoder state if decoder not enabledSean Young
One struct ir_raw_event_ctrl is allocated per raw IR device; reduce the amount allocated if not all decoders are enabled. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-26bpf: add bpf_ktime_get_boot_ns()Maciej Żenczykowski
On a device like a cellphone which is constantly suspending and resuming CLOCK_MONOTONIC is not particularly useful for keeping track of or reacting to external network events. Instead you want to use CLOCK_BOOTTIME. Hence add bpf_ktime_get_boot_ns() as a mirror of bpf_ktime_get_ns() based around CLOCK_BOOTTIME instead of CLOCK_MONOTONIC. Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-04-21media: iguanair: rc drivers no longer need to do lockingSean Young
Since commit 4957133fe32f ("media: lirc: improve locking"), drivers do not need to do any of their own locking. During suspend and resume, no processes are running so no locking is needed. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-21media: ir-rx51: Use 64-bit division macroGuru Das Srinagesh
Since the PWM framework is switching struct pwm_state.period's datatype to u64, prepare for this transition by using DIV_ROUND_CLOSEST_ULL to handle a 64-bit dividend. Cc: Richard Fontana <rfontana@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Allison Randal <allison@lohutok.net> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-20media: rc: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: rc: make scancodes 64 bitSean Young
There are many protocols that encode more than 32 bit. We want 64 bit support so that BPF IR decoders can decode more than 32 bit. None of the existing kernel IR decoders/encoders support 64 bit, for now. The MSC_SCAN event can only contain 32 bit scancodes, so we only generate MSC_SCAN events if the scancode fits into 32 bits. The full 64 bit scancode can be read from the lirc chardev. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-02media: rc: iguanair: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-23 20:00:59 +0000