linux-yocto - Yocto Linux Embedded kernel

Age	Commit message (Collapse)	Author
2020-07-09	iommu/arm-smmu: Mark qcom_smmu_client_of_match as possibly unused	Jordan Crouse
	When CONFIG_OF=n of_match_device() gets pre-processed out of existence leaving qcom-smmu_client_of_match unused. Mark it as possibly unused to keep the compiler from warning in that case. Fixes: 0e764a01015d ("iommu/arm-smmu: Allow client devices to select direct mapping") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200604203905.31964-1-jcrouse@codeaurora.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-18	iommu/arm-smmu-qcom: Request direct mapping for modem device	Sibi Sankar
	The modem remote processor has two access paths to DDR. One path is directly connected to DDR and another path goes through an SMMU. The SMMU path is configured to be a direct mapping because it's used by various peripherals in the modem subsystem. Typically this direct mapping is configured statically at EL2 by QHEE (Qualcomm's Hypervisor Execution Environment) before the kernel is entered. In certain firmware configuration, especially when the kernel is already in full control of the SMMU, defer programming the modem SIDs to the kernel. Let's add compatibles here so that we can have the kernel program the SIDs for the modem in these cases. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200511175532.25874-1-sibis@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2020-05-07	iommu/arm-smmu: Allow client devices to select direct mapping	Jordan Crouse
	Some client devices want to directly map the IOMMU themselves instead of using the DMA domain. Allow those devices to opt in to direct mapping by way of a list of compatible strings. Co-developed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/7cf1f64167b5545b7f42275395be1f1e2ea3a6ac.1587407458.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2020-05-07	iommu: arm-smmu-impl: Convert to a generic reset implementation	Sai Prakash Ranjan
	Currently the QCOM specific smmu reset implementation is very specific to SDM845 SoC and has a wait-for-safe logic which may not be required for other SoCs. So move the SDM845 specific logic to its specific reset function. Also add SC7180 SMMU compatible for calling into QCOM specific implementation. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/d24a0278021bc0b2732636c5728efe55e7318a8b.1587407458.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04	iommu: arm-smmu-impl: Add sdm845 implementation hook	Vivek Gautam
	Add reset hook for sdm845 based platforms to turn off the wait-for-safe sequence. Understanding how wait-for-safe logic affects USB and UFS performance on MTP845 and DB845 boards: Qcom's implementation of arm,mmu-500 adds a WAIT-FOR-SAFE logic to address under-performance issues in real-time clients, such as Display, and Camera. On receiving an invalidation requests, the SMMU forwards SAFE request to these clients and waits for SAFE ack signal from real-time clients. The SAFE signal from such clients is used to qualify the start of invalidation. This logic is controlled by chicken bits, one for each - MDP (display), IFE0, and IFE1 (camera), that can be accessed only from secure software on sdm845. This configuration, however, degrades the performance of non-real time clients, such as USB, and UFS etc. This happens because, with wait-for-safe logic enabled the hardware tries to throttle non-real time clients while waiting for SAFE ack signals from real-time clients. On mtp845 and db845 devices, with wait-for-safe logic enabled by the bootloaders we see degraded performance of USB and UFS when kernel enables the smmu stage-1 translations for these clients. Turn off this wait-for-safe logic from the kernel gets us back the perf of USB and UFS devices until we re-visit this when we start seeing perf issues on display/camera on upstream supported SDM845 platforms. The bootloaders on these boards implement secure monitor callbacks to handle a specific command - QCOM_SCM_SVC_SMMU_PROGRAM with which the logic can be toggled. There are other boards such as cheza whose bootloaders don't enable this logic. Such boards don't implement callbacks to handle the specific SCM call so disabling this logic for such boards will be a no-op. This change is inspired by the downstream change from Patrick Daly to address performance issues with display and camera by handling this wait-for-safe within separte io-pagetable ops to do TLB maintenance. So a big thanks to him for the change and for all the offline discussions. Without this change the UFS reads are pretty slow: $ time dd if=/dev/sda of=/dev/zero bs=1048576 count=10 conv=sync 10+0 records in 10+0 records out 10485760 bytes (10.0MB) copied, 22.394903 seconds, 457.2KB/s real 0m 22.39s user 0m 0.00s sys 0m 0.01s With this change they are back to rock! $ time dd if=/dev/sda of=/dev/zero bs=1048576 count=300 conv=sync 300+0 records in 300+0 records out 314572800 bytes (300.0MB) copied, 1.030541 seconds, 291.1MB/s real 0m 1.03s user 0m 0.00s sys 0m 0.54s Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Will Deacon <will@kernel.org>