summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)Author
2020-06-24input: i8042 - Remove special PowerPC handlingNathan Chancellor
[ Upstream commit e4f4ffa8a98c24a4ab482669b1e2b4cfce3f52f4 ] This causes a build error with CONFIG_WALNUT because kb_cs and kb_data were removed in commit 917f0af9e5a9 ("powerpc: Remove arch/ppc and include/asm-ppc"). ld.lld: error: undefined symbol: kb_cs > referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a > referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a > referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a ld.lld: error: undefined symbol: kb_data > referenced by i8042.c:309 (drivers/input/serio/i8042.c:309) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a > referenced by i8042-ppcio.h:33 (drivers/input/serio/i8042-ppcio.h:33) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a > referenced by i8042.c:319 (drivers/input/serio/i8042.c:319) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a > referenced 15 more times Presumably since nobody has noticed this for the last 12 years, there is not anyone actually trying to use this driver so we can just remove this special walnut code and use the generic header so it builds for all configurations. Fixes: 917f0af9e5a9 ("powerpc: Remove arch/ppc and include/asm-ppc") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20200518181043.3363953-1-natechancellor@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24Input: edt-ft5x06 - fix get_default register write accessMarco Felsch
[ Upstream commit 255cdaf73412de13608fb776101402dca68bed2b ] Since commit b6eba86030bf ("Input: edt-ft5x06 - add offset support for ev-ft5726") offset-x and offset-y is supported. Devices using those offset parameters don't support the offset parameter so we need to add the NO_REGISTER check for edt_ft5x06_ts_get_defaults(). Fixes: b6eba86030bf ("Input: edt-ft5x06 - add offset support for ev-ft5726") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20200227112819.16754-2-m.felsch@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a few random driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - add a second working PNP_ID for Lenovo T470s Input: applespi - replace zero-length array with flexible-array Input: axp20x-pek - always register interrupt handlers Input: lm8333 - update contact email Input: synaptics-rmi4 - fix error return code in rmi_driver_probe() Input: synaptics-rmi4 - really fix attn_data use-after-free Input: i8042 - add ThinkPad S230u to i8042 reset list Revert "Input: i8042 - add ThinkPad S230u to i8042 nomux list" Input: dlink-dir685-touchkeys - fix a typo in driver name Input: xpad - add custom init packet for Xbox One S controllers Input: evdev - call input_flush_device() on release(), not flush() Input: i8042 - add ThinkPad S230u to i8042 nomux list Input: usbtouchscreen - add support for BonXeon TP Input: cros_ec_keyb - use cros_ec_cmd_xfer_status helper Input: mms114 - fix handling of mms345l Input: elants_i2c - support palm detection
2020-05-26Input: synaptics - add a second working PNP_ID for Lenovo T470sDennis Kadioglu
The Lenovo Thinkpad T470s I own has a different touchpad with "LEN007a" instead of the already included PNP ID "LEN006c". However, my touchpad seems to work well without any problems using RMI. So this patch adds the other PNP ID. Signed-off-by: Dennis Kadioglu <denk@eclipso.email> Link: https://lore.kernel.org/r/ff770543cd53ae818363c0fe86477965@mail.eclipso.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-09Input: applespi - replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200507185347.GA14499@embeddedor Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-05Input: axp20x-pek - always register interrupt handlersHans de Goede
On some X86 devices we do not register an input-device, because the power-button is also handled by the soc_button_array (GPIO) input driver, and we want to avoid reporting power-button presses to userspace twice. Sofar when we did this we also did not register our interrupt handlers, since those were only necessary to report input events. But on at least 2 device models the Medion Akoya E1239T and the GPD win, the GPIO pin used by the soc_button_array driver for the power-button cannot wakeup the system from suspend. Why this does not work is not clear, I've tried comparing the value of all relevant registers on the Cherry Trail SoC, with those from models where this does work. I've checked: PMC registers: FUNC_DIS, FUNC_DIS2, SOIX_WAKE_EN, D3_STS_0, D3_STS_1, D3_STDBY_STS_0, D3_STDBY_STS_1; PMC ACPI I/O regs: PM1_STS_EN, GPE0a_EN and they all have identical contents in the working and non working cases. I suspect that the firmware either sets some unknown register to a value causing this, or that it turns off a power-plane which is necessary for GPIO wakeups to work during suspend. What does work on the Medion Akoya E1239T is letting the AXP288 wakeup the system on a power-button press (the GPD win has a different PMIC). Move the registering of the power-button press/release interrupt-handler from axp20x_pek_probe_input_device() to axp20x_pek_probe() so that the PMIC will wakeup the system on a power-button press, even if we do not register an input device. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200426155757.297087-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-28Input: synaptics-rmi4 - fix error return code in rmi_driver_probe()Wei Yongjun
Fix to return a negative error code from the input_register_device() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200428134948.78343-1-weiyongjun1@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-27Input: synaptics-rmi4 - really fix attn_data use-after-freeEvan Green
Fix a use-after-free noticed by running with KASAN enabled. If rmi_irq_fn() is run twice in a row, then rmi_f11_attention() (among others) will end up reading from drvdata->attn_data.data, which was freed and left dangling in rmi_irq_fn(). Commit 55edde9fff1a ("Input: synaptics-rmi4 - prevent UAF reported by KASAN") correctly identified and analyzed this bug. However the attempted fix only NULLed out a local variable, missing the fact that drvdata->attn_data is a struct, not a pointer. NULL out the correct pointer in the driver data to prevent the attention functions from copying from it. Fixes: 55edde9fff1a ("Input: synaptics-rmi4 - prevent UAF reported by KASAN") Fixes: b908d3cd812a ("Input: synaptics-rmi4 - allow to add attention data") Signed-off-by: Evan Green <evgreen@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200427145537.1.Ic8f898e0147beeee2c005ee7b20f1aebdef1e7eb@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-27Input: i8042 - add ThinkPad S230u to i8042 reset listKevin Locke
On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version "GDETC1WW (1.81 ) 06/27/2019", the keyboard, Synaptics TouchPad, and TrackPoint either do not function or stop functioning a few minutes after boot. This problem has been noted before, perhaps only occurring with BIOS 1.57 and later.[1][2][3][4][5] Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago and although the [BIOS changelog] notes "Fixed an issue of UEFI touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be insufficient. Setting i8042.reset=1 or adding 33474HU to the reset list avoids the issue on my system from either warm or cold boot. [1]: https://bugs.launchpad.net/bugs/1210748 [2]: https://bbs.archlinux.org/viewtopic.php?pid=1360425 [3]: https://forums.linuxmint.com/viewtopic.php?f=46&t=41200 [4]: https://forums.linuxmint.com/viewtopic.php?f=49&t=157115 [5]: https://forums.lenovo.com/topic/findpost/27/1337119 [BIOS changelog]: https://download.lenovo.com/pccbbs/mobiles/gduj33uc.txt Signed-off-by: Kevin Locke <kevin@kevinlocke.name> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/94f384b0f75f90f71425d7dce7ac82c59ddb87a8.1587702636.git.kevin@kevinlocke.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-27Revert "Input: i8042 - add ThinkPad S230u to i8042 nomux list"Dmitry Torokhov
This reverts commit 18931506465a762ffd3f4803d36a18d336a67da9. From Kevin Locke: "... nomux only appeared to fix the issue because the controller continued working after warm reboots. After more thorough testing from both warm and cold start, I now believe the entry should be added to i8042_dmi_reset_table rather than i8042_dmi_nomux_table as i8042.reset=1 alone is sufficient to avoid the issue from both states while i8042.nomux is not."
2020-04-22Input: dlink-dir685-touchkeys - fix a typo in driver nameChristophe JAILLET
According to the file name and Kconfig, a 'k' is missing in this driver name. It should be "dlink-dir685-touchkeys". Fixes: 131b3de7016b ("Input: add D-Link DIR-685 touchkeys driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200412213937.5287-1-christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-22Input: xpad - add custom init packet for Xbox One S controllersŁukasz Patron
Sending [ 0x05, 0x20, 0x00, 0x0f, 0x06 ] packet for Xbox One S controllers fixes an issue where controller is stuck in Bluetooth mode and not sending any inputs. Signed-off-by: Łukasz Patron <priv.luk@gmail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200422075206.18229-1-priv.luk@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-22Input: evdev - call input_flush_device() on release(), not flush()Brendan Shanks
input_flush_device() should only be called once the struct file is being released and no open descriptors remain, but evdev_flush() was calling it whenever a file descriptor was closed. This caused uploaded force-feedback effects to be erased when a process did a dup()/close() on the event FD, called system(), etc. Call input_flush_device() from evdev_release() instead. Reported-by: Mathieu Maret <mathieu.maret@gmail.com> Signed-off-by: Brendan Shanks <bshanks@codeweavers.com> Link: https://lore.kernel.org/r/20200421231003.7935-1-bshanks@codeweavers.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-20Input: i8042 - add ThinkPad S230u to i8042 nomux listKevin Locke
On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version "GDETC1WW (1.81 ) 06/27/2019", whether booted in UEFI or Legacy/CSM mode the keyboard, Synaptics TouchPad, and TrackPoint either do not function or stop functioning a few minutes after boot. This problem has been noted before, perhaps only occurring on BIOS 1.57 and later.[1][2][3][4][5] This model does not have an external PS/2 port, so mux does not appear to be useful. Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago and although the [BIOS changelog] notes "Fixed an issue of UEFI touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be insufficient. Adding 33474HU to the nomux list avoids the issue on my system. [1]: https://bugs.launchpad.net/bugs/1210748 [2]: https://bbs.archlinux.org/viewtopic.php?pid=1360425 [3]: https://forums.linuxmint.com/viewtopic.php?f=46&t=41200 [4]: https://forums.linuxmint.com/viewtopic.php?f=49&t=157115 [5]: https://forums.lenovo.com/topic/findpost/27/1337119 [BIOS changelog]: https://download.lenovo.com/pccbbs/mobiles/gduj33uc.txt Signed-off-by: Kevin Locke <kevin@kevinlocke.name> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/feb8a8339a67025dab3850e6377eb6f3a0e782ba.1587400635.git.kevin@kevinlocke.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-18Input: usbtouchscreen - add support for BonXeon TPJames Hilliard
Based on available information this uses the singletouch irtouch protocol. This is tested and confirmed to be fully functional on the BonXeon TP hardware I have. Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20200413184217.55700-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-18Input: cros_ec_keyb - use cros_ec_cmd_xfer_status helperEnric Balletbo i Serra
This patch makes use of cros_ec_cmd_xfer_status() instead of cros_ec_cmd_xfer(). In this case there is no advantage of doing this apart from that we want to make cros_ec_cmd_xfer() a private function for the EC protocol and let people only use the cros_ec_cmd_xfer_status() to return Linux standard error codes. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20200414210434.1534982-1-enric.balletbo@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-14Input: mms114 - fix handling of mms345lStephan Gerhold
MMS345L is another first generation touch screen from Melfas, which uses the same registers as MMS152. However, using I2C_M_NOSTART for it causes errors when reading: i2c i2c-0: sendbytes: NAK bailout. mms114 0-0048: __mms114_read_reg: i2c transfer failed (-5) The driver works fine as soon as I2C_M_NOSTART is removed. Reviewed-by: Andi Shyti <andi@etezian.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200405170904.61512-1-stephan@gerhold.net [dtor: removed separate mms345l handling, made everyone use standard transfer mode, propagated the 10bit addressing flag to the read part of the transfer as well.] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-14Input: elants_i2c - support palm detectionJohnny Chuang
Elan uses the least significant bit of byte 33 to signal the type of contact (finger versus palm). The default value is 1 for all firmwares, which is reported as MT_TOOL_FINGER. If firmware supports palm detection, the bit will change to 0 and the driver will report such contact as MT_TOOL_PALM. Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Link: https://lore.kernel.org/r/1585551756-29066-1-git-send-email-johnny.chuang.emc@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "An update to the Goodix touchscreen driver to enable it work properly on various Bay Trail and Cherry Trail devices, and a few other assorted changes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits) Input: update SPDX tag for input-event-codes.h Input: i8042 - add Acer Aspire 5738z to nomux list Input: goodix - fix compilation when ACPI support is disabled dt-bindings: touchscreen: Convert edt-ft5x06 to json-schema Input: of_touchscreen - explicitly choose axis Input: goodix - support gt9147 touchpanel dt-bindings: touchscreen: goodix: support of gt9147 Input: goodix - add support for Goodix GT917S Input: goodix - use string-based chip ID dt-bindings: input: touchscreen: add compatible string for Goodix GT917S Input: goodix - add support for more then one touch-key Input: goodix - fix spurious key release events Input: goodix - try to reset the controller if the i2c-test fails Input: goodix - restore config on resume if necessary Input: goodix - make goodix_send_cfg() take a raw buffer as argument Input: goodix - add minimum firmware size check Input: goodix - save a copy of the config from goodix_read_config() Input: goodix - move defines to above struct goodix_ts_data declaration Input: goodix - add support for controlling the IRQ pin through ACPI methods Input: goodix - add support for getting IRQ + reset GPIOs on Bay Trail devices ...
2020-04-07Merge tag 'mfd-next-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mfd updates from Lee Jones: "New Drivers: - Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors New Device Support: - Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC - Add support for Comet Lake to Intel LPSS New Functionality: - Add support for Charger Detection to Spreadtrum SC27xx PMICs - Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC - Add ACPI enumeration support to Diolan DLN2 USB Adaptor Fix-ups: - Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847 - I2C registration; rn5t618 - Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1 - Use flexible-array members; omap-usb-tll, qcom-pm8xxx - Remove unnecessary casts; omap-usb-host, omap-usb-tll - Power (suspend/resume/poweroff) enhancements; rk808 - Improve error/sanity checking; dln2 - Use snprintf(); aat2870-core Bug Fixes: - Fix PCI IDs in intel-lpss-pci" * tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (33 commits) mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clock mfd: aat2870: Use scnprintf() for avoiding potential buffer overflow mfd: dln2: Allow to be enumerated via ACPI mfd: da9062: Add support for interrupt polarity defined in device tree dt-bindings: bd718x7: Yamlify and add BD71850 mfd: dln2: Fix sanity checking for endpoints mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDs mfd: sc27xx: Add USB charger type detection support dt-bindings: mfd: Document STM32 low power timer bindings mfd: rk808: Convert RK805 to shutdown/suspend hooks mfd: rk808: Reduce shutdown duplication mfd: rk808: Stop using syscore ops mfd: rk808: Ensure suspend/resume hooks always work mfd: rk808: Always use poweroff when requested mfd: omap: Remove useless cast for driver.name mfd: Kconfig: Fix some misspelling of the word functionality mfd: pm8xxx: Replace zero-length array with flexible-array member mfd: omap-usb-tll: Replace zero-length array with flexible-array member mfd: cpcap: Fix compile if MFD_CORE is not selected mfd: cros_ec: Check DT node for usbpd-notify add ...
2020-04-06Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 5.7 merge window.
2020-04-01Input: i8042 - add Acer Aspire 5738z to nomux listHans de Goede
The Acer Aspire 5738z has a button to disable (and re-enable) the touchpad next to the touchpad. When this button is pressed a LED underneath indicates that the touchpad is disabled (and an event is send to userspace and GNOME shows its touchpad enabled / disable OSD thingie). So far so good, but after re-enabling the touchpad it no longer works. The laptop does not have an external ps2 port, so mux mode is not needed and disabling mux mode fixes the touchpad no longer working after toggling it off and back on again, so lets add this laptop model to the nomux list. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200331123947.318908-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-01Input: goodix - fix compilation when ACPI support is disabledHans de Goede
acpi_evaluate_object() and acpi_execute_simple_method() are not part of the group of ACPI related functions which get stubbed by include/linux/acpi.h when ACPI support is disabled, so the IRQ_PIN_ACCESS_ACPI_METHOD handling code must be stubbed out. For consistency use the same #if condition as which is used to replace goodix_add_acpi_gpio_mappings with a stub. Fixes: c5fca485320e ("Input: goodix - add support for controlling the IRQ pin through ACPI methods") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200401014529.GL75430@dtor-ws [dtor: stubbed out the ACPI method accessors] Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-30Merge tag 'driver-core-5.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core changes for 5.7-rc1. Nothing huge in here, just lots of little firmware core changes and use of new apis, a libfs fix, a debugfs api change, and some driver core deferred probe rework. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits) Revert "driver core: Set fw_devlink to "permissive" behavior by default" driver core: Set fw_devlink to "permissive" behavior by default driver core: Replace open-coded list_last_entry() driver core: Read atomic counter once in driver_probe_done() libfs: fix infoleak in simple_attr_read() driver core: Add device links from fwnode only for the primary device platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet platform/x86: touchscreen_dmi: Add EFI embedded firmware info support Input: icn8505 - Switch to firmware_request_platform for retreiving the fw Input: silead - Switch to firmware_request_platform for retreiving the fw selftests: firmware: Add firmware_request_platform tests test_firmware: add support for firmware_request_platform firmware: Add new platform fallback mechanism and firmware_request_platform() Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking" drivers: base: power: wakeup.c: Use built-in RCU list checking component: allow missing unbind callback debugfs: remove return value of debugfs_create_file_size() debugfs: Check module state before warning in {full/open}_proxy_open() firmware: fix a double abort case with fw_load_sysfs_fallback arch_topology: Fix putting invalid cpu clk ...
2020-03-27input: keyboard: Add support for Azoteq IQS620A/621/622/624/625Jeff LaBundy
This patch adds key and switch support for the Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix to generate proper timestamps on key autorepeat events that were broken recently - a fix for Synaptics driver to only activate reduced reporting mode when explicitly requested - a new keycode for "selective screenshot" function - other assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: fix stale timestamp on key autorepeat events Input: move the new KEY_SELECTIVE_SCREENSHOT keycode Input: avoid BIT() macro usage in the serio.h UAPI header Input: synaptics-rmi4 - set reduced reporting mode only when requested Input: synaptics - enable RMI on HP Envy 13-ad105ng Input: allocate keycode for "Selective Screenshot" key Input: tm2-touchkey - add support for Coreriver TC360 variant dt-bindings: input: add Coreriver TC360 binding dt-bindings: vendor-prefixes: Add Coreriver vendor prefix Input: raydium_i2c_ts - fix error codes in raydium_i2c_boot_trigger()
2020-03-26Input: fix stale timestamp on key autorepeat eventsDmitry Torokhov
We need to refresh timestamp when emitting key autorepeat events, otherwise they will carry timestamp of the original key press event. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206929 Fixes: 3b51c44bd693 ("Input: allow drivers specify timestamp for input events") Cc: stable@vger.kernel.org Reported-by: teika kazura <teika@gmx.com> Tested-by: teika kazura <teika@gmx.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: synaptics-rmi4 - set reduced reporting mode only when requestedAndrew Duggan
The previous patch "c5ccf2ad3d33 (Input: synaptics-rmi4 - switch to reduced reporting mode)" enabled reduced reporting mode unintentionally on some devices, if the firmware was configured with default Delta X/Y threshold values. The result unintentionally degrade the performance of some touchpads. This patch checks to see that the driver is modifying the delta X/Y thresholds before modifying the reporting mode. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Fixes: c5ccf2ad3d33 ("Input: synaptics-rmi4 - switch to reduced reporting mode") Link: https://lore.kernel.org/r/20200312005549.29922-1-aduggan@synaptics.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: synaptics - enable RMI on HP Envy 13-ad105ngYussuf Khalil
This laptop (and perhaps other variants of the same model) reports an SMBus-capable Synaptics touchpad. Everything (including suspend and resume) works fine when RMI is enabled via the kernel command line, so let's add it to the whitelist. Signed-off-by: Yussuf Khalil <dev@pp3345.net> Link: https://lore.kernel.org/r/20200307213508.267187-1-dev@pp3345.net Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: of_touchscreen - explicitly choose axisAndy Shevchenko
The 'axis + 1' calculation is implicit and potentially error prone. Moreover, few lines before the axis is set explicitly for both X and Y. Do the same when retrieving different properties for X and Y. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200303180917.12563-1-andriy.shevchenko@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - support gt9147 touchpanelYannick Fertre
Add support for it by adding compatible and supported chip data (default settings used). The chip data on GT9147 is similar to GT912, like - config data register has 0x8047 address - config data register max len is 240 - config data checksum has 8-bit Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/1583144308-3781-3-git-send-email-yannick.fertre@st.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - add support for Goodix GT917SIcenowy Zheng
Goodix GT917S is a touchscreen chip from Goodix that is in the GT1x family. Add its support by assigning the gt1x config to it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20200228010146.12215-4-icenowy@aosc.io Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - use string-based chip IDIcenowy Zheng
For Goodix GT917S chip, the chip ID string is "917S", which contains not only numbers now. Use string-based chip ID in the driver to support this chip and further chips with alphanumber ID. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20200228010146.12215-3-icenowy@aosc.io Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - add support for more then one touch-keyDmitry Mastykin
Some devices with a goodix touchscreen have more then 1 capacitive touch-key. This commit replaces the current support for a single touch-key, which ignored the reported key-code. With support for up to 7 touch-keys, based upon checking the key-code which is post-fixed to any reported touch-data. KEY_LEFTMETA is assigned to the first touch-key (it will still be the default keycode for devices with a single touch-key). KEY_F1, KEY_F2... are assigned as default keycode for the other touch-keys. This commit also add supports for keycode remapping, so that systemd-udev's hwdb can be used to remap the codes to send keycodes to match the icons on the buttons for devices with more then 1 touch-key. Signed-off-by: Dmitry Mastykin <dmastykin@astralinux.ru> Reviewed-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20200316075302.3759-1-dmastykin@astralinux.ru Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - fix spurious key release eventsDmitry Mastykin
The goodix panel sends spurious interrupts after a 'finger up' event, which always cause a timeout. We were exiting the interrupt handler by reporting touch_num == 0, but this was still processed as valid and caused the code to use the uninitialised point_data, creating spurious key release events. Report an error from the interrupt handler so as to avoid processing invalid point_data further. Signed-off-by: Dmitry Mastykin <dmastykin@astralinux.ru> Reviewed-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20200316075302.3759-2-dmastykin@astralinux.ru Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - try to reset the controller if the i2c-test failsHans de Goede
On some ACPI/x86 devices (where we use one of the ACPI IRQ pin access methods) the firmware is buggy, it does not properly reset the controller at boot, and we cannot communicate with it. Normally on ACPI/x86 devices we do not want to reset the controller at probe time since in some cases this causes the controller to loose its configuration and this is loaded into it by the system's firmware. So on these systems we leave the reset_controller_at_probe flag unset, even though we have a access to both the IRQ and reset pins and thus could reset it. In the case of the buggy firmware we have to reset the controller to actually be able to talk to it. This commit adds a special case for this, if the goodix_i2c_test() fails, and we have not reset the controller yet; and we do have a way to reset the controller then retry the i2c-test after resetting the controller. This fixes the driver failing at probe on ACPI/x86 systems with this firmware bug. Reported-and-tested-by: Dmitry Mastykin <dmastykin@astralinux.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200311191013.10826-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - restore config on resume if necessaryHans de Goede
Some devices, e.g the Trekstor Primetab S11B, lose there config over a suspend/resume cycle (likely the controller loses power during suspend). This commit reads back the config version on resume and if matches the expected config version it resets the controller and resends the config we read back and saved at probe time. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200307121505.3707-11-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - make goodix_send_cfg() take a raw buffer as argumentHans de Goede
Make goodix_send_cfg() take a raw buffer as argument instead of a struct firmware *cfg, so that it can also be used to restore the config on resume if necessary. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200307121505.3707-10-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - add minimum firmware size checkHans de Goede
Our goodix_check_cfg_* helpers do things like: int i, raw_cfg_len = cfg->size - 2; ... if (check_sum != cfg->data[raw_cfg_len]) { When cfg->size < 2, this will end up indexing the cfg->data array with a negative value, which will not end well. To fix this this commit adds a new GOODIX_CONFIG_MIN_LENGTH define and adds a minimum size check for firmware-config files using this new define. For consistency this commit also adds a new GOODIX_CONFIG_GT9X_LENGTH for the length used for recent gt9xx and gt1xxx chips, instead of using GOODIX_CONFIG_MAX_LENGTH for this, so that if other length defines get added in the future it will be clear that the MIN and MAX defines should contain the min and max values of all the other defines. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20200307121505.3707-9-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - save a copy of the config from goodix_read_config()Hans de Goede
Save a copy of the config in goodix_read_config(), this is a preparation patch for restoring the config if it was lost after a supend/resume cycle. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200307121505.3707-8-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - move defines to above struct goodix_ts_data declarationHans de Goede
Move the defines to above the struct goodix_ts_data declaration, so that the MAX defines can be used inside the struct goodix_ts_data declaration. No functional changes, just moving a block of code. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200307121505.3707-7-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - add support for controlling the IRQ pin through ACPI methodsHans de Goede
Some Apollo Lake (x86, UEFI + ACPI) devices only list the reset GPIO in their _CRS table and the bit-banging of the IRQ line necessary to wake-up the controller from suspend can be done by calling 2 Goodix custom / specific ACPI methods. This commit adds support for controlling the IRQ line in this matter, allowing us to properly suspend the touchscreen controller on such devices. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200307121505.3707-6-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - add support for getting IRQ + reset GPIOs on Bay Trail devicesHans de Goede
On most Bay Trail (x86, UEFI + ACPI) devices the ACPI tables do not have a _DSD with a "daffd814-6eba-4d8c-8a91-bc9bbf4aa301" UUID, adding "irq-gpios" and "reset-gpios" mappings, so we cannot get the GPIOS by name without first manually adding mappings ourselves. These devices contain 2 GpioIo resource in their _CRS table, on all 4 such devices which I have access to, the order of the 2 GPIOs is reset, int. Note that the GPIO to which the touchscreen controller irq pin is connected is configured in direct-irq mode on these Bay Trail devices, the pinctrl-baytrail.c driver still allows controlling the pin as a GPIO in this case, but this is not necessarily the case on other X86 ACPI platforms, nor do we have a guarantee that the GPIO order is the same elsewhere, so we limit the use of a _CRS table with 2 GpioIo resources to Bay Trail devices only. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200307121505.3707-5-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - add support for getting IRQ + reset GPIOs on Cherry Trail ↵Hans de Goede
devices On most Cherry Trail (x86, UEFI + ACPI) devices the ACPI tables do not have a _DSD with a "daffd814-6eba-4d8c-8a91-bc9bbf4aa301" UUID, adding "irq-gpios" and "reset-gpios" mappings, so we cannot get the GPIOS by name without first manually adding mappings ourselves. These devices contain 1 GpioInt and 1 GpioIo resource in their _CRS table: Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { I2cSerialBusV2 (0x0014, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C2", 0x00, ResourceConsumer, , Exclusive, ) GpioInt (Edge, ActiveLow, Shared, PullDefault, 0x0000, "\\_SB.GPO1", 0x00, ResourceConsumer, , ) { // Pin list 0x0013 } GpioIo (Shared, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO1", 0x00, ResourceConsumer, , ) { // Pin list 0x0019 } }) Return (RBUF) /* \_SB_.PCI0.I2C2.TCS1._CRS.RBUF */ } There is no fixed order for these 2. This commit adds code to check that there is 1 of each as expected and then registers a mapping matching their order using devm_acpi_dev_add_driver_gpios(). This gives us access to both GPIOs allowing us to properly suspend the controller during suspend, and making it possible to reset the controller if necessary. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20200307121505.3707-4-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - make resetting the controller at probe independent from the ↵Hans de Goede
GPIO setup Before this commit we would always reset the controller at probe when we have access to the GPIOs which are necessary to do a reset. Doing the reset requires access to the GPIOs, but just because we have access to the GPIOs does not mean that we should always reset the controller at probe. On X86 ACPI platforms the BIOS / UEFI firmware will already have reset the controller and it will have loaded the device specific config into the controller. Doing the reset sometimes causes the controller to lose its configuration, so on X86 ACPI platforms this is not a good idea. This commit adds a new reset_controller_at_probe boolean to control the reset at probe behavior. This commits sets the new bool to true when we set irq_pin_access_method to IRQ_PIN_ACCESS_GPIO, so there are no functional changes. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200307121505.3707-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - make loading the config from disk independent from the GPIO ↵Hans de Goede
setup At least on X86 ACPI platforms it is not necessary to load the touchscreen controller config from disk, if it needs to be loaded this has already been done by the BIOS / UEFI firmware. Even on other (e.g. devicetree) platforms the config-loading as currently done has the issue that the loaded cfg file is based on the controller model, but the actual cfg is device specific, so the cfg files are not part of linux-firmware and this can only work with a device specific OS image which includes the cfg file. And we do not need access to the GPIOs at all to load the config, if we do not have access we can still load the config. So all in all tying the decision to try to load the config from disk to being able to access the GPIOs is not desirable. This commit adds a new load_cfg_from_disk boolean to control the firmware loading instead. This commits sets the new bool to true when we set irq_pin_access_method to IRQ_PIN_ACCESS_GPIO, so there are no functional changes. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200307121505.3707-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: goodix - refactor IRQ pin GPIO accessesHans de Goede
Suspending Goodix touchscreens requires changing the interrupt pin to output before sending them a power-down command. Followed by wiggling the interrupt pin to wake the device up, after which it is put back in input mode. So far we have only effectively supported this on devices which use devicetree. On X86 ACPI platforms both looking up the pins; and using a pin as both IRQ and GPIO is a bit more complicated. E.g. on some devices we cannot directly access the IRQ pin as GPIO and we need to call ACPI methods to control it instead. This commit adds a new irq_pin_access_method field to the goodix_chip_data struct and adds goodix_irq_direction_output and goodix_irq_direction_input helpers which together abstract the GPIO accesses to the IRQ pin. This is a preparation patch for adding support for properly suspending the touchscreen on X86 ACPI platforms. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317 BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20200307121505.3707-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-20Input: icn8505 - Switch to firmware_request_platform for retreiving the fwHans de Goede
Unfortunately sofar we have been unable to get permission to redistribute icn8505 touchscreen firmwares in linux-firmware. This means that people need to find and install the firmware themselves before the touchscreen will work Some UEFI/x86 tablets with an icn8505 touchscreen have a copy of the fw embedded in their UEFI boot-services code. This commit makes the icn8505 driver use the new firmware_request_platform function, which will fallback to looking for such an embedded copy when direct filesystem lookup fails. This will make the touchscreen work OOTB on devices where there is a fw copy embedded in the UEFI code. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200115163554.101315-9-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-20Input: silead - Switch to firmware_request_platform for retreiving the fwHans de Goede
Unfortunately sofar we have been unable to get permission to redistribute Silead touchscreen firmwares in linux-firmware. This means that people need to find and install the firmware themselves before the touchscreen will work Some UEFI/x86 tablets with a Silead touchscreen have a copy of the fw embedded in their UEFI boot-services code. This commit makes the silead driver use the new firmware_request_platform function, which will fallback to looking for such an embedded copy when direct filesystem lookup fails. This will make the touchscreen work OOTB on devices where there is a fw copy embedded in the UEFI code. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200115163554.101315-8-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-06Input: tm2-touchkey - add support for Coreriver TC360 variantNick Reitemeyer
The Coreriver TouchCore 360 is like the midas board touchkey, but it is using a fixed regulator. Signed-off-by: Nick Reitemeyer <nick.reitemeyer@web.de> Link: https://lore.kernel.org/r/20200121141525.3404-3-nick.reitemeyer@web.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-30 15:26:13 +0000