summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)Author
2019-03-13Input: wacom_serial4 - add support for Wacom ArtPad II tabletJason Gerecke
commit 44fc95e218a09d7966a9d448941fdb003f6bb69f upstream. Tablet initially begins communicating at 9600 baud, so this command should be used to connect to the device: $ inputattach --daemon --baud 9600 --wacom_iv /dev/ttyS0 https://github.com/linuxwacom/xf86-input-wacom/issues/40 Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780Matti Kurkela
commit e8b22d0a329f0fb5c7ef95406872d268f01ee3b1 upstream. Like Fujitsu CELSIUS H760, the H780 also has a three-button Elantech touchpad, but the driver needs to be told so to enable the middle touchpad button. The elantech_dmi_force_crc_enabled quirk was not necessary with the H780. Also document the fw_version and caps values detected for both H760 and H780 models. Signed-off-by: Matti Kurkela <Matti.Kurkela@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20Input: bma150 - register input device after setting private dataJonathan Bakker
commit 90cc55f067f6ca0e64e5e52883ece47d8af7b67b upstream. Otherwise we introduce a race condition where userspace can request input before we're ready leading to null pointer dereference such as input: bma150 as /devices/platform/i2c-gpio-2/i2c-5/5-0038/input/input3 Unable to handle kernel NULL pointer dereference at virtual address 00000018 pgd = (ptrval) [00000018] *pgd=55dac831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: bma150 input_polldev [last unloaded: bma150] CPU: 0 PID: 2870 Comm: accelerometer Not tainted 5.0.0-rc3-dirty #46 Hardware name: Samsung S5PC110/S5PV210-based board PC is at input_event+0x8/0x60 LR is at bma150_report_xyz+0x9c/0xe0 [bma150] pc : [<80450f70>] lr : [<7f0a614c>] psr: 800d0013 sp : a4c1fd78 ip : 00000081 fp : 00020000 r10: 00000000 r9 : a5e2944c r8 : a7455000 r7 : 00000016 r6 : 00000101 r5 : a7617940 r4 : 80909048 r3 : fffffff2 r2 : 00000000 r1 : 00000003 r0 : 00000000 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 54e34019 DAC: 00000051 Process accelerometer (pid: 2870, stack limit = 0x(ptrval)) Stackck: (0xa4c1fd78 to 0xa4c20000) fd60: fffffff3 fc813f6c fd80: 40410581 d7530ce3 a5e2817c a7617f00 a5e29404 a5e2817c 00000000 7f008324 fda0: a5e28000 8044f59c a5fdd9d0 a5e2945c a46a4a00 a5e29668 a7455000 80454f10 fdc0: 80909048 a5e29668 a5fdd9d0 a46a4a00 806316d0 00000000 a46a4a00 801df5f0 fde0: 00000000 d7530ce3 a4c1fec0 a46a4a00 00000000 a5fdd9d0 a46a4a08 801df53c fe00: 00000000 801d74bc a4c1fec0 00000000 a4c1ff70 00000000 a7038da8 00000000 fe20: a46a4a00 801e91fc a411bbe0 801f2e88 00000004 00000000 80909048 00000041 fe40: 00000000 00020000 00000000 dead4ead a6a88da0 00000000 ffffe000 806fcae8 fe60: a4c1fec8 00000000 80909048 00000002 a5fdd9d0 a7660110 a411bab0 00000001 fe80: dead4ead ffffffff ffffffff a4c1fe8c a4c1fe8c d7530ce3 20000013 80909048 fea0: 80909048 a4c1ff70 00000001 fffff000 a4c1e000 00000005 00026038 801eabd8 fec0: a7660110 a411bab0 b9394901 00000006 a696201b 76fb3000 00000000 a7039720 fee0: a5fdd9d0 00000101 00000002 00000096 00000000 00000000 00000000 a4c1ff00 ff00: a6b310f4 805cb174 a6b310f4 00000010 00000fe0 00000010 a4c1e000 d7530ce3 ff20: 00000003 a5f41400 a5f41424 00000000 a6962000 00000000 00000003 00000002 ff40: ffffff9c 000a0000 80909048 d7530ce3 a6962000 00000003 80909048 ffffff9c ff60: a6962000 801d890c 00000000 00000000 00020000 a7590000 00000004 00000100 ff80: 00000001 d7530ce3 000288b8 00026320 000288b8 00000005 80101204 a4c1e000 ffa0: 00000005 80101000 000288b8 00026320 000288b8 000a0000 00000000 00000000 ffc0: 000288b8 00026320 000288b8 00000005 7eef3bac 000264e8 00028ad8 00026038 ffe0: 00000005 7eef3300 76f76e91 76f78546 800d0030 000288b8 00000000 00000000 [<80450f70>] (input_event) from [<a5e2817c>] (0xa5e2817c) Code: e1a08148 eaffffa8 e351001f 812fff1e (e590c018) ---[ end trace 1c691ee85f2ff243 ]--- Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISKMauro Ciancio
commit 7ad222b3aed350adfc27ee7eec4587ffe55dfdce upstream. This adds ELAN0617 to the ACPI table to support Elan touchpad found in Lenovo V330-15ISK. Signed-off-by: Mauro Ciancio <mauro@acadeu.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20Revert "Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G"Dmitry Torokhov
commit f420c54e4b12c1361c6ed313002ee7bd7ac58362 upstream. This reverts commit 7db54c89f0b30a101584e09d3729144e6170059d as it breaks Acer Aspire V-371 and other devices. According to Elan: "Acer Aspire F5-573G is MS Precision touchpad which should use hid multitouch driver. ELAN0501 should not be added in elan_i2c." Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202503 Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31Input: uinput - fix undefined behavior in uinput_validate_absinfo()Dmitry Torokhov
commit d77651a227f8920dd7ec179b84e400cce844eeb3 upstream. An integer overflow may arise in uinput_validate_absinfo() if "max - min" can't be represented by an "int". We should check for overflow before trying to use the result. Reported-by: Kyungtae Kim <kt0755@gmail.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31Input: xpad - add support for SteelSeries Stratus DuoTom Panfil
commit fe2bfd0d40c935763812973ce15f5764f1c12833 upstream. Add support for the SteelSeries Stratus Duo, a wireless Xbox 360 controller. The Stratus Duo ships with a USB dongle to enable wireless connectivity, but it can also function as a wired controller by connecting it directly to a PC via USB, hence the need for two USD PIDs. 0x1430 is the dongle, and 0x1431 is the controller. Signed-off-by: Tom Panfil <tom@steelseries.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-13Input: synaptics - enable SMBus for HP EliteBook 840 G4Mantas Mikulėnas
[ Upstream commit 7a71712293ba303aad928f580b89addb0be2892e ] dmesg reports that "Your touchpad (PNP: SYN3052 SYN0100 SYN0002 PNP0f13) says it can support a different bus." I've tested the offered psmouse.synaptics_intertouch=1 with 4.18.x and 4.19.x and it seems to work well. No problems seen with suspend/resume. Also, it appears that RMI/SMBus mode is actually required for 3-4 finger multitouch gestures to work -- otherwise they are not reported at all. Information from dmesg in both modes: psmouse serio3: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3139, fw id: 2000742 psmouse serio3: synaptics: Trying to set up SMBus access rmi4_smbus 6-002c: registering SMbus-connected sensor rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3139-001, fw id: 2000742 Signed-off-by: Mantas Mikulėnas <grawity@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13Input: synaptics - enable RMI on ThinkPad T560Yussuf Khalil
[ Upstream commit ca5047286c9c93a01e1f471d00a6019536992954 ] Before commit 7fd6d98b89f3 ("i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus"), enabling RMI on the T560 would cause the touchpad to stop working after resuming from suspend. Now that this issue is fixed, RMI can be enabled safely and works fine. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Yussuf Khalil <dev@pp3345.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13Input: omap-keypad - fix idle configuration to not block SoC idle statesTony Lindgren
[ Upstream commit e2ca26ec4f01486661b55b03597c13e2b9c18b73 ] With PM enabled, I noticed that pressing a key on the droid4 keyboard will block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as suggested by Dmitry Torokhov <dmitry.torokhov@gmail.com>. From the hardware point of view, looks like we need to manage the registers for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE register now gone with IRQF_ONESHOT, also the SoC idle state problem is gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent blocking deeper SoC idle states after rmmod omap4-keypad. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-09Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573GPatrick Dreyer
commit 7db54c89f0b30a101584e09d3729144e6170059d upstream. This adds ELAN0501 to the ACPI table to support Elan touchpad found in ASUS Aspire F5-573G. Signed-off-by: Patrick Dreyer <Patrick.Dreyer@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-09Input: atmel_mxt_ts - don't try to free unallocated kernel memorySanjeev Chugh
commit 1e3c336ad8f40f88a8961c434640920fe35cc08b upstream. If the user attempts to update Atmel device with an invalid configuration cfg file, error handling code is trying to free cfg file memory which is not allocated yet hence results into kernel crash. This patch fixes the order of memory free operations. Signed-off-by: Sanjeev Chugh <sanjeev_chugh@mentor.com> Fixes: a4891f105837 ("Input: atmel_mxt_ts - zero terminate config firmware file") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-29Input: elantech - disable elan-i2c for P52 and P72Benjamin Tissoires
commit d21ff5d7f8c397261e095393a1a8e199934720bc upstream. The current implementation of elan_i2c is known to not support those 2 laptops. A proper fix is to tweak both elantech and elan_i2c to transmit the correct information from PS/2, which would make a bad candidate for stable. So to give us some time for fixing the root of the problem, disable elan_i2c for the devices we know are not behaving properly. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1803600 Link: https://bugs.archlinux.org/task/59714 Fixes: df077237cf55 Input: elantech - detect new ICs and setup Host Notify for them Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-21Input: omap-keypad - fix keyboard debounce configurationTony Lindgren
[ Upstream commit 6c3516fed7b61a3527459ccfa67fab130d910610 ] I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations. This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21Input: synaptics - enable SMBus for HP 15-ay000Teika Kazura
[ Upstream commit 5a6dab15f7a79817cab4af612ddd99eda793fce6 ] SMBus works fine for the touchpad with id SYN3221, used in the HP 15-ay000 series, This device has been reported in these messages in the "linux-input" mailing list: * https://marc.info/?l=linux-input&m=152016683003369&w=2 * https://www.spinics.net/lists/linux-input/msg52525.html Reported-by: Nitesh Debnath <niteshkd1999@gmail.com> Reported-by: Teika Kazura <teika@gmx.com> Signed-off-by: Teika Kazura <teika@gmx.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21Input: hyper-v - fix wakeup from suspend-to-idleVitaly Kuznetsov
[ Upstream commit 10f91c73cc41ceead210a905dbd196398e99c7d2 ] It makes little sense but still possible to put Hyper-V guests into suspend-to-idle state. To wake them up two wakeup sources were registered in the past: hyperv-keyboard and hid-hyperv. However, since commit eed4d47efe95 ("ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle") pm_wakeup_event() from these devices is ignored. Switch to pm_wakeup_hard_event() API as these devices are actually the only possible way to wakeup Hyper-V guests. Fixes: eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle) Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-08Input: elan_i2c - add support for ELAN0621 touchpadAdam Wong
commit bf87ade0dd7f8cf19dac4d3161d5e86abe0c062b upstream. Added the ability to detect the ELAN0621 touchpad found in some Lenovo laptops. Signed-off-by: Adam Wong <adam@adamwong.me> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-08Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARRNoah Westervelt
commit ad33429cd02565c28404bb16ae7a4c2bdfda6626 upstream. Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo IdeaPad 330-15ARR. Signed-off-by: Noah Westervelt <nwestervelt@outlook.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-08Input: elan_i2c - add ELAN0620 to the ACPI tablePatrick Gaskin
commit 3ed64da3b790be7c63601e8ca6341b7dff74a660 upstream. Add ELAN0620 to the ACPI table to support the elan touchpad in the Lenovo IdeaPad 130-15IKB. Signed-off-by: Patrick Gaskin <patrick@pgaskin.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-08Input: cros_ec_keyb - fix button/switch capability reportsBrian Norris
commit ac5722c1643a2fb75224c79b578214956d34f989 upstream. The cros_ec_keyb_bs array lists buttons and switches together, expecting that its users will match the appropriate type and bit fields. But cros_ec_keyb_register_bs() only checks the 'bit' field, which causes misreported input capabilities in some cases. For example, tablets (e.g., Scarlet -- a.k.a. Acer Chromebook Tab 10) were reporting a SW_LID capability, because EC_MKBP_POWER_BUTTON and EC_MKBP_LID_OPEN happen to share the same bit. (This has comedic effect on a tablet, in which a power-management daemon then thinks this "lid" is closed, and so puts the system to sleep as soon as it boots!) To fix this, check both the 'ev_type' and 'bit' fields before reporting the capability. Tested with a lid (Kevin / Samsung Chromebook Plus) and without a lid (Scarlet / Acer Chromebook Tab 10). This error got introduced when porting the feature from the downstream Chromium OS kernel to be upstreamed. Fixes: cdd7950e7aa4 ("input: cros_ec_keyb: Add non-matrix buttons and switches") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-08Input: matrix_keypad - check for errors from of_get_named_gpio()Christian Hoff
commit d55bda1b3e7c5a87f10da54fdda866a9a9cef30b upstream. "of_get_named_gpio()" returns a negative error value if it fails and drivers should check for this. This missing check was now added to the matrix_keypad driver. In my case "of_get_named_gpio()" returned -EPROBE_DEFER because the referenced GPIOs belong to an I/O expander, which was not yet probed at the point in time when the matrix_keypad driver was loading. Because the driver did not check for errors from the "of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER" is actually a GPIO number and continued as usual, which led to further errors like this later on: WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114 gpio_to_desc+0xc8/0xd0 invalid GPIO -517 Note that the "GPIO number" -517 in the error message above is actually "-EPROBE_DEFER". As part of the patch a misleading error message "no platform data defined" was also removed. This does not lead to information loss because the other error paths in matrix_keypad_parse_dt() already print an error. Signed-off-by: Christian Hoff <christian_hoff@gmx.net> Suggested-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Sebastian Reichel <sre@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-08Input: synaptics - add PNP ID for ThinkPad P50 to SMBusLyude Paul
commit 9df39bedbf292680655c6a947c77d6562c693d4a upstream. Noticed the other day the trackpoint felt different on my P50, then realized it was because rmi4 wasn't loading for this machine automatically. Suspend/resume, hibernate, and everything else seem to work perfectly fine on here. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-08Input: xpad - quirk all PDP Xbox One gamepadsCameron Gutman
commit a6754fae1e66e9a40fed406290d7ca3f2b4d227c upstream. Since we continue to find tons of new variants [0,1,2,3,4,5,6] that need the PDP quirk, let's just quirk all devices from PDP. [0]: https://github.com/paroj/xpad/pull/104 [1]: https://github.com/paroj/xpad/pull/105 [2]: https://github.com/paroj/xpad/pull/108 [3]: https://github.com/paroj/xpad/pull/109 [4]: https://github.com/paroj/xpad/pull/112 [5]: https://github.com/paroj/xpad/pull/115 [6]: https://github.com/paroj/xpad/pull/116 Fixes: e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers") Cc: stable@vger.kernel.org Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01Input: synaptics - avoid using uninitialized variable when probingDmitry Torokhov
commit f39f8688888ae74fa8deae2d01289b69b4727394 upstream. synaptics_detect() does not check whether sending commands to the device succeeds and instead relies on getting unique data from the device. Let's make sure we seed entire buffer with zeroes to make sure we will not use garbage on stack that just happen to be 0x47. Reported-by: syzbot+13cb3b01d0784e4ffc3f@syzkaller.appspotmail.com Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-21Input: wm97xx-ts - fix exit pathRandy Dunlap
[ Upstream commit a3f7c3fcf60868c1e90671df5d0cf9be5900a09b ] Loading then unloading wm97xx-ts.ko when CONFIG_AC97_BUS=m causes a WARNING: from drivers/base/driver.c: Unexpected driver unregister! WARNING: CPU: 0 PID: 1709 at ../drivers/base/driver.c:193 driver_unregister+0x30/0x40 Fix this by only calling driver_unregister() with the same condition that driver_register() is called. Fixes: ae9d1b5fbd7b ("Input: wm97xx: add new AC97 bus support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-20Merge branch 'for-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Dmitry writes: "Input updates for 4.19-rc8 Just an addition to elan touchpad driver ACPI table." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGM
2018-10-15Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGMMikhail Nikiforov
Add ELAN061C to the ACPI table to support Elan touchpad found in Lenovo IdeaPad 330-15IGM. Signed-off-by: Mikhail Nikiforov <jackxviichaos@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-12Merge branch 'for-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Dmitry writes: "Input updates for v4.19-rc7 - we added a few scheduling points into various input interfaces to ensure that large writes will not cause RCU stalls - fixed configuring PS/2 keyboards as wakeup devices on newer platforms - added a new Xbox gamepad ID." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: uinput - add a schedule point in uinput_inject_events() Input: evdev - add a schedule point in evdev_write() Input: mousedev - add a schedule point in mousedev_write() Input: i8042 - enable keyboard wakeups by default when s2idle is used Input: xpad - add support for Xbox1 PDP Camo series gamepad
2018-10-05Input: uinput - add a schedule point in uinput_inject_events()Dmitry Torokhov
Large writes to uinput interface may cause rcu stalls. Let's add cond_resched() to the loop to avoid this. Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-05Input: evdev - add a schedule point in evdev_write()Dmitry Torokhov
Large writes to evdev interface may cause rcu stalls. Let's add cond_resched() to the loop to avoid this. Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-04Input: mousedev - add a schedule point in mousedev_write()Eric Dumazet
syzbot was able to trigger rcu stalls by calling write() with large number of bytes. Add a cond_resched() in the loop to avoid this. Link: https://lkml.org/lkml/2018/8/23/1106 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+9436b02171ac0894d33e@syzkaller.appspotmail.com Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-01Input: i8042 - enable keyboard wakeups by default when s2idle is usedDaniel Drake
Previously, on typical consumer laptops, pressing a key on the keyboard when the system is in suspend would cause it to wake up (default or unconditional behaviour). This happens because the EC generates a SCI interrupt in this scenario. That is no longer true on modern laptops based on Intel WhiskeyLake, including Acer Swift SF314-55G, Asus UX333FA, Asus UX433FN and Asus UX533FD. We confirmed with Asus EC engineers that the "Modern Standby" design has been modified so that the EC no longer generates a SCI in this case; the keyboard controller itself should be used for wakeup. In order to retain the standard behaviour of being able to use the keyboard to wake up the system, enable serio wakeups by default on platforms that are using s2idle. Link: https://lkml.kernel.org/r/CAB4CAwfQ0mPMqCLp95TVjw4J0r5zKPWkSvvkK4cpZUGE--w8bQ@mail.gmail.com Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-01Input: xpad - add support for Xbox1 PDP Camo series gamepadRamses Ramírez
The "Xbox One PDP Wired Controller - Camo series" has a different product-id than the regular PDP controller and the PDP stealth series, but it uses the same initialization sequence. This patch adds the product-id of the camo series to the structures that handle the other PDP Xbox One controllers. Signed-off-by: Ramses Ramírez <ramzeto@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-09-28Merge branch 'for-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Dmitry writes: "Input updates for v4.19-rc5 Just a few driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: uinput - allow for max == min during input_absinfo validation Input: elantech - enable middle button of touchpad on ThinkPad P72 Input: atakbd - fix Atari CapsLock behaviour Input: atakbd - fix Atari keymap Input: egalax_ts - add system wakeup support Input: gpio-keys - fix a documentation index issue
2018-09-18Input: uinput - allow for max == min during input_absinfo validationPeter Hutterer
These values are inclusive, so a range of 1 requires min == max. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Reviewed-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-09-18Input: elantech - enable middle button of touchpad on ThinkPad P72Aaron Ma
Adding 2 new touchpad IDs to support middle button support. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-09-18Input: atakbd - fix Atari CapsLock behaviourMichael Schmitz
The CapsLock key on Atari keyboards is not a toggle, it does send the normal make and break scancodes. Drop the CapsLock toggle handling code, which did cause the CapsLock key to merely act as a Shift key. Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-09-18Input: atakbd - fix Atari keymapAndreas Schwab
Fix errors in Atari keymap (mostly in keypad, help and undo keys). Patch provided on debian-68k ML by Andreas Schwab <schwab@linux-m68k.org>, keymap array size and unhandled scancode limit adjusted to 0x73 by me. Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-09-18Input: egalax_ts - add system wakeup supportAnson Huang
This patch adds wakeup function support for egalax touch screen, if "wakeup-source" is added to device tree's egalax touch screen node, the wakeup function will be enabled, and egalax touch screen will be able to wakeup system from suspend. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-23Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 32-bit SoC platform updates from Olof Johansson: "Most of the SoC updates in this cycle are cleanups and moves to more modern infrastructure: - Davinci was moved to common clock framework - OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the keyboard interface (bitbanged AT keyboard via GPIO). - Removal of some stale code for Renesas platforms - Power management improvements for i.MX6LL" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (112 commits) ARM: uniphier: select RESET_CONTROLLER arm64: uniphier: select RESET_CONTROLLER ARM: uniphier: remove empty Makefile ARM: exynos: Clear global variable on init error path ARM: exynos: Remove outdated maintainer information ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15 ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill soc: r9a06g032: don't build SMP files for non-SMP config ARM: shmobile: Add the R9A06G032 SMP enabler driver ARM: at91: pm: configure wakeup sources for ULP1 mode ARM: at91: pm: add PMC fast startup registers defines ARM: at91: pm: Add ULP1 mode support ARM: at91: pm: Use ULP0 naming instead of slow clock ARM: hisi: handle of_iomap and fix missing of_node_put ARM: hisi: check of_iomap and fix missing of_node_put ARM: hisi: fix error handling and missing of_node_put ARM: mx5: Set the DBGEN bit in ARM_GPC register ARM: imx51: Configure M4IF to avoid visual artifacts ARM: imx: call imx6sx_cpuidle_init() conditionally for 6sll ARM: imx: fix i.MX6SLL build ...
2018-08-21Merge branch 'i2c/for-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - the core has now a lockless variant of i2c_smbus_xfer. Some open coded versions of this got removed in drivers. This also enables proper SCCB support in regmap. - locking got a more precise naming. i2c_{un}lock_adapter() had to go, and we know use i2c_lock_bus() consistently with flags like I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity. - the gpio fault injector got a new delicate testcase - the bus recovery procedure got fixed to handle the new testcase correctly - a new quirk flag for controllers not able to handle zero length messages together with driver updates to use it - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl family S900 - and a good set of driver improvements and bugfixes * 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits) i2c: rcar: implement STOP and REP_START according to docs i2c: rcar: refactor private flags i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes dt-bindings: i2c: rcar: Add r8a774a1 support dt-bindings: i2c: sh_mobile: Add r8a774a1 support i2c: imx: Simplify stopped state tracking i2c: imx: Fix race condition in dma read i2c: pasemi: remove hardcoded bus numbers on smbus i2c: designware: Add SPDX license tag i2c: designware: Convert to use struct i2c_timings i2c: core: Parse SDA hold time from firmware i2c: designware-pcidrv: Mark expected switch fall-through i2c: amd8111: Mark expected switch fall-through i2c: sh_mobile: use core to detect 'no zero length read' quirk i2c: xlr: use core to detect 'no zero length' quirk i2c: rcar: use core to detect 'no zero length' quirk i2c: stu300: use core to detect 'no zero length' quirk i2c: pmcmsp: use core to detect 'no zero length' quirk i2c: mxs: use core to detect 'no zero length' quirk ...
2018-08-20Merge tag 'mfd-next-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver - Add ChromeOS EC CEC driver - Add ROHM BD71837 PMIC driver New Device Support: - Add support for Dialog Semi DA9063L PMIC variant to DA9063 - Add support for Intel Ice Lake to Intel-PLSS-PCI - Add support for X-Powers AXP806 to AXP20x New Functionality: - Add support for USB Charging to the ChromeOS Embedded Controller - Add support for HDMI CEC to the ChromeOS Embedded Controller - Add support for HDMI CEC to Intel HDMI - Add support for accessory detection to Madera devices - Allow individual pins to be configured via DT' wlf,csnaddr-pd - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp Fix-upsL - Trivial renaming/spelling fixes; cros_ec, da9063-* - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc - Transition to helper macros/functions; da9063-* - Constify; kempld-core - Improve error path/messages; wm8994-core - Disable IRQs locally instead of relying on USB subsystem; dln2 - Remove unused code; rave-sp - New exports; sec-core Bug Fixes: - Fix possible false I2C transaction error; arizona-core - Fix declared memory area size; hi655x-pmic - Fix checksum type; rave-sp - Fix incorrect default serial port configuration: rave-sp - Fix incorrect coherent DMA mask for sub-devices; sm501" * tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: madera: Add register definitions for accessory detect mfd: sm501: Set coherent_dma_mask when creating subdevices mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC mfd: bd71837: Core driver for ROHM BD71837 PMIC media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC mfd: sec-core: Export OF module alias table mfd: as3722: Disable auto-power-on when AC OK mfd: axp20x: Support AXP806 in I2C mode mfd: axp20x: Add self-working mode support for AXP806 dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806 mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts mfd: wm8994: Allow to configure Speaker Mode Pullup from dts mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it mfd: rave-sp: Add legacy watchdog ping command translation mfd: rave-sp: Add legacy EEPROM access command translation mfd: rave-sp: Initialize flow control and parity of the port mfd: rave-sp: Fix incorrectly specified checksum type mfd: rave-sp: Remove unused defines mfd: hi655x: Fix regmap area declared size for hi655x mfd: ti_am335x_tscadc: Fix struct clk memory leak ...
2018-08-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for Rohm BU21029 touch controller - new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free - updates to Atmel, eeti. pxrc and iforce drivers - assorted driver cleanups and fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) MAINTAINERS: Add PhoenixRC Flight Controller Adapter Input: do not use WARN() in input_alloc_absinfo() Input: mark expected switch fall-throughs Input: raydium_i2c_ts - use true and false for boolean values Input: evdev - switch to bitmap API Input: gpio-keys - switch to bitmap_zalloc() Input: elan_i2c_smbus - cast sizeof to int for comparison bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free() md: Avoid namespace collision with bitmap API dm: Avoid namespace collision with bitmap API Input: pm8941-pwrkey - add resin entry Input: pm8941-pwrkey - abstract register offsets and event code Input: iforce - reorganize joystick configuration lists Input: atmel_mxt_ts - move completion to after config crc is updated Input: atmel_mxt_ts - don't report zero pressure from T9 Input: atmel_mxt_ts - zero terminate config firmware file Input: atmel_mxt_ts - refactor config update code to add context struct Input: atmel_mxt_ts - config CRC may start at T71 Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE ...
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-08-18Merge tag 'staging-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO updates from Greg KH: "Here are the big staging/iio patches for 4.19-rc1. Lots of churn here, with tons of cleanups happening in staging drivers, a removal of an old crypto driver that no one was using (skein), and the addition of some new IIO drivers. Also added was a "gasket" driver from Google that needs loads of work and the erofs filesystem. Even with adding all of the new drivers and a new filesystem, we are only adding about 1000 lines overall to the kernel linecount, which shows just how much cleanup happened, and how big the unused crypto driver was. All of these have been in the linux-next tree for a while now with no reported issues" * tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (903 commits) staging:rtl8192u: Remove unused macro definitions - Style staging:rtl8192u: Add spaces around '+' operator - Style staging:rtl8192u: Remove stale comment - Style staging: rtl8188eu: remove unused mp_custom_oid.h staging: fbtft: Add spaces around / - Style staging: fbtft: Erases some repetitive usage of function name - Style staging: fbtft: Adjust some empty-line problems - Style staging: fbtft: Removes one nesting level to help readability - Style staging: fbtft: Changes gamma table to define. staging: fbtft: A bit more information on dev_err. staging: fbtft: Fixes some alignment issues - Style staging: fbtft: Puts macro arguments in parenthesis to avoid precedence issues - Style staging: rtl8188eu: remove unused array dB_Invert_Table staging: rtl8188eu: remove whitespace, add missing blank line staging: rtl8188eu: use is_multicast_ether_addr in rtw_sta_mgt.c staging: rtl8188eu: remove whitespace - style staging: rtl8188eu: cleanup block comment - style staging: rtl8188eu: use is_multicast_ether_addr in rtl8188eu_xmit.c staging: rtl8188eu: use is_multicast_ether_addr in recv_linux.c staging: rtlwifi: refactor rtl_get_tcb_desc ...
2018-08-16Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 4.19 merge window.
2018-08-13Merge tag 'm68k-for-v4.19-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Enable mac_scsi PDMA on PowerBook 500 - Generic dma_noncoherent_ops conversion - Time handling improvements - I/O accessor improvements - Conversion to MEMBLOCK and NO_BOOTMEM, to bring m68k in line with other mainstream architectures - Miscellaneous fixes and cleanups - Defconfig updates * tag 'm68k-for-v4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/defconfig: Update defconfigs for v4.18-rc6 m68k: switch to MEMBLOCK + NO_BOOTMEM m68k/page_no.h: force __va argument to be unsigned long m68k/bitops: convert __ffs to match generic declaration m68k/io: Switch mmu variant to <asm-generic/io.h> m68k/io: Move mem*io define guards to <asm/kmap.h> Input: hilkbd - Add casts to HP9000/300 I/O accessors net: mac8390: Use standard memcpy_{from,to}io() m68k/io: Add missing ioremap define guards, fix typo m68k: Remove unused set_clock_mmss() helpers m68k: mac: Use time64_t in RTC handling m68k: Use generic dma_noncoherent_ops nubus: Set default dma mask for nubus_board devices m68k/mac: Enable PDMA for PowerBook 500 series
2018-08-08Input: do not use WARN() in input_alloc_absinfo()Dmitry Torokhov
Some of fuzzers set panic_on_warn=1 so that they can handle WARN()ings the same way they handle full-blown kernel crashes. We used WARN() in input_alloc_absinfo() to get a better idea where memory allocation failed, but since then kmalloc() and friends started dumping call stack on memory allocation failures anyway, so we are not getting anything extra from WARN(). Because of the above, let's replace WARN with dev_err(). We use dev_err() instead of simply removing message and relying on kcalloc() to give us stack dump so that we'd know the instance of hardware device to which we were trying to attach input device. Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-08Input: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-08Input: raydium_i2c_ts - use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-12 17:35:48 +0000