aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/mouse/synaptics.c
AgeCommit message (Collapse)Author
2015-10-02Revert "Input: synaptics - fix handling of disabling gesture mode"Dmitry Torokhov
This reverts commit e51e38494a8ecc18650efb0c840600637891de2c: we actually do want the device to work in extended W mode, as this is the mode that allows us receiving multiple contact information. Cc: stable@vger.kernel.org
2015-08-26Input: synaptics - fix handling of disabling gesture modeDmitry Torokhov
Bit 2 of the mode byte has dual meaning: it can disable reporting of gestures when touchpad works in Relative mode or normal Absolute mode, or it can enable so called Extended W-Mode when touchpad uses enhanced Absolute mode (W-mode). The extended W-Mode confuses our driver and causes missing button presses on some Thinkpads (x250, T450s), so let's make sure we do not enable it. Also, according to the spec W mode "... bit is defined only in Absolute mode on pads whose capExtended capability bit is set. In Relative mode and in TouchPads without this capability, the bit is reserved and should be left at 0.", so let's make sure we respect this requirement as well. Reported-by: Nick Bowler <nbowler@draconx.ca> Suggested-by: Gabor Balla <gaborwho@gmail.com> Tested-by: Gabor Balla <gaborwho@gmail.com> Tested-by: Nick Bowler <nbowler@draconx.ca> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-27Input: synaptics - dump ext10 capabilities as wellJiri Kosina
Make extended capabilities obtained through $10 query also available in touchpad identification. Signed-off-by: Jiri Kosina <jkosina@suse.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-10Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors"Dmitry Torokhov
This reverts commit 63c4fda3c0bb841b1aad1298fc7fe94058fc79f8 as it causes issues with detecting 3-finger taps. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100481 Cc: stable@vger.kernel.org Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2015-06-08Input: synaptics - add min/max quirk for Lenovo S540Peter Hutterer
https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2 Cc: stable@vger.kernel.org Tested-by: tommy.gagnes@gmail.com Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-07Merge tag 'v4.0-rc7' into nextDmitry Torokhov
Sync up with Linux 4.0-rc7 to bring in ALPS changes.
2015-04-06Input: synaptics - allocate 3 slots to keep stability in image sensorsBenjamin Tissoires
When slowly dropping 1, 2 and then 3 fingers on an image sensor touchpad, we can see that the first finger gets reassigned a new slot while it did not move. This is due to the kernel tracking algorithm which can not assign correctly the 3 touches, being out of slots. Declaring that we support 3 slots allows to actually forward: slot 0 -> down, slot 1 -> up, slot 2 -> down Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Henrik Rydberg <rydberg@bitmath.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06Input: Revert "Revert "synaptics - use dmax in input_mt_assign_slots""Benjamin Tissoires
This reverts commit 09d042a2eb90 ("Revert "Input: synaptics - use dmax in input_mt_assign_slots"") Now that balanced slots assignments seem to be fixed, let's re-enable the use in synaptics.c and wait for users to complain if there are still problems. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Henrik Rydberg <rydberg@bitmath.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-31Input: synaptics - fix min-max quirk value for E440Filip Ayazi
Commit 98dc070373 ("Input: synaptics - add quirk for Thinkpad E440") had a typo in ymax, this changes the value to the one reported by touchpad-edge-detector and mentioned in the commit. Signed-off-by: Filip Ayazi <filipayazi@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-23Input: synaptics - add quirk for Thinkpad E440Ramiro Morales
Its ClickPad shares PNP ID "LEN2006" with the one in model E540 which is already handled by the driver (both are Haswell iterations of the Edge line, launched in 2014) but the dimensions it reports are different: $ sudo ./touchpad-edge-detector /dev/input/event3 Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event3 Move one finger around the touchpad to detect the actual edges Kernel says: x [1472..5044], y [1408..3398] Touchpad sends: x [1024..5045], y [2457..4832] /^C Fortunately we can use the board ID, which is also different, to distinguish among them. $ dmesg | grep -i synaptics psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00, board id: 2691, fw id: 1494646 psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4 Board ID in E540 is 2722: psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00, board id: 2722, fw id: 1484859 (from https://launchpadlibrarian.net/179702965/BootDmesg.txt) Signed-off-by: Ramiro Morales <cramm0@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-23Merge tag 'v4.0-rc5' into nextDmitry Torokhov
Merge with the latest upstream to synchronize Synaptics changes and bring in new infrastructure pieces. Conflicts: drivers/input/mouse/synaptics.c
2015-03-16Revert "Input: synaptics - use dmax in input_mt_assign_slots"Dmitry Torokhov
This reverts commit 6ab17a8484f03c188a93713369912f1545eb26e9 since it, according to Benjamin, causes issues with slot assignment: E: 15.669119 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 15.954242 0003 002f 0000 # EV_ABS / ABS_MT_SLOT 0 E: 15.954242 0003 0039 0505 # EV_ABS / ABS_MT_TRACKING_ID 505 E: 15.954242 0003 0035 3851 # EV_ABS / ABS_MT_POSITION_X 3851 E: 15.954242 0003 0036 4076 # EV_ABS / ABS_MT_POSITION_Y 4076 E: 15.954242 0003 003a 0034 # EV_ABS / ABS_MT_PRESSURE 34 E: 15.954242 0001 014a 0001 # EV_KEY / BTN_TOUCH 1 E: 15.954242 0003 0000 3851 # EV_ABS / ABS_X 3851 E: 15.954242 0003 0001 4076 # EV_ABS / ABS_Y 4076 E: 15.954242 0003 0018 0034 # EV_ABS / ABS_PRESSURE 34 E: 15.954242 0001 0145 0001 # EV_KEY / BTN_TOOL_FINGER 1 E: 15.954242 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- ... (bunch of regular events)... E: 16.020614 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 16.043601 0003 0035 3873 # EV_ABS / ABS_MT_POSITION_X 3873 E: 16.043601 0003 0036 3903 # EV_ABS / ABS_MT_POSITION_Y 3903 E: 16.043601 0003 003a 0050 # EV_ABS / ABS_MT_PRESSURE 50 E: 16.043601 0003 0035 3032 # EV_ABS / ABS_MT_POSITION_X 3032 E: 16.043601 0003 0036 3832 # EV_ABS / ABS_MT_POSITION_Y 3832 E: 16.043601 0003 003a 0044 # EV_ABS / ABS_MT_PRESSURE 44 E: 16.043601 0003 0000 3032 # EV_ABS / ABS_X 3032 E: 16.043601 0003 0001 3832 # EV_ABS / ABS_Y 3832 E: 16.043601 0003 0018 0044 # EV_ABS / ABS_PRESSURE 44 E: 16.043601 0001 0145 0000 # EV_KEY / BTN_TOOL_FINGER 0 E: 16.043601 0001 014d 0001 # EV_KEY / BTN_TOOL_DOUBLETAP 1 E: 16.043601 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 16.068837 0003 002f 0001 # EV_ABS / ABS_MT_SLOT 1 E: 16.068837 0003 0039 0506 # EV_ABS / ABS_MT_TRACKING_ID 506 E: 16.068837 0003 0035 3912 # EV_ABS / ABS_MT_POSITION_X 3912 E: 16.068837 0003 0036 3743 # EV_ABS / ABS_MT_POSITION_Y 3743 E: 16.068837 0003 003a 0056 # EV_ABS / ABS_MT_PRESSURE 56 E: 16.068837 0003 002f 0000 # EV_ABS / ABS_MT_SLOT 0 E: 16.068837 0003 0035 3026 # EV_ABS / ABS_MT_POSITION_X 3026 E: 16.068837 0003 0036 3708 # EV_ABS / ABS_MT_POSITION_Y 3708 E: 16.068837 0003 003a 0052 # EV_ABS / ABS_MT_PRESSURE 52 E: 16.068837 0003 0000 3026 # EV_ABS / ABS_X 3026 E: 16.068837 0003 0001 3708 # EV_ABS / ABS_Y 3708 E: 16.068837 0003 0018 0052 # EV_ABS / ABS_PRESSURE 52 E: 16.068837 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- Slot 0 and 1 gets inverted in the second report above, which introduces a cursor jump. The problem is that this cursor jump is often enough to leave the current widget, and X sends the scrolling events to whoever is now under the cursor. Reported-by: Benjamin Tissoires <btissoir@redhat.com> Reported-by: Hans de Goede <hdegoede@redhat.com>
2015-03-16Merge branch 'synaptics' into for-linusDmitry Torokhov
Bring in changes needed to properly handle Lenovo 2015 lineup.
2015-03-08Input: synaptics - remove X250 from the topbuttonpad listBenjamin Tissoires
Lenovo X250 has a PnpID of LEN0046, but it does not have the top software button requirement. For the record, Lenovo T450s and W541 have a PnpID of LEN200f and LEN004a, so they are not on the top software button list. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Daniel Martin <consume.noise@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08Input: synaptics - remove X1 Carbon 3rd gen from the topbuttonpad listBenjamin Tissoires
Lenovo decided to switch back to physical buttons for the trackstick on their latest series. The PNPId list was provided before they reverted back to physical buttons, so it contains the new models too. We can know from the touchpad capabilities that the touchpad has physical buttons, so removing the ids from the list is not mandatory. It is still nicer to remove the wrong ids, so start by removing the X1 Carbon 3rd gen, with the PNPId of LEN0048. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08Input: synaptics - re-route tracksticks buttons on the Lenovo 2015 seriesBenjamin Tissoires
The 2015 series of the Lenovo thinkpads added back the hardware buttons on top of the touchpad for the trackstick. Unfortunately, they are wired to the touchpad, and not the trackstick. Thus, they are seen as extra buttons from the kernel point of view. This leads to a problem in user space because extra buttons on synaptics devices used to be used as scroll up/down buttons. So in the end, the experience for the user is scroll events for buttons left and right when using the trackstick. Yay! Fortunately, the firmware advertises such behavior in the extended capability $10, and so we can re-route the buttons through the pass-through interface. Hallelujah-expressed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08Input: synaptics - remove TOPBUTTONPAD property for Lenovos 2015Benjamin Tissoires
The 2015 series of the Lenovo thinkpads added back the hardware buttons on top of the touchpad for the trackstick. Unfortunately, Lenovo used the PNPIDs that are supposed to be "5 buttons" touchpads, so the new laptops also have the INPUT_PROP_TOPBUTTONPAD. Yay! Instead of manually removing each of the new ones, or hoping that we know all the current ones, we can consider that the PNPIDs list that were given contains touchpads that have the trackstick buttons, either physically wired to them, or emulated with the top software button property. Thanks to the extra buttons capability in query $10, we can reliably detect the physical buttons from the software ones, and so we can remove the TOPBUTTONPAD property even if it was declared as such. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08Input: synaptics - retrieve the extended capabilities in query $10Benjamin Tissoires
Newer Synaptics touchpads need to get information from the query $10. Retrieve it if available. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08Input: synaptics - do not retrieve the board id on old firmwaresBenjamin Tissoires
The board id capability has been added in firmware 7.5. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08Input: synaptics - handle spurious release of trackstick buttonsBenjamin Tissoires
The Fimware 8.1 has a bug in which the extra buttons are only sent when the ExtBit is 1. This should be fixed in a future FW update which should have a bump of the minor version. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08Input: synaptics - fix middle button on Lenovo 2015 productsDmitry Torokhov
On the X1 Carbon 3rd gen (with a 2015 broadwell cpu), the physical middle button of the trackstick (attached to the touchpad serio device, of course) seems to get lost. Actually, the touchpads reports 3 extra buttons, which falls in the switch below to the '2' case. Let's handle the case of odd numbers also, so that the middle button finds its way back. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08Input: synaptics - skip quirks when post-2013 dimensionsBenjamin Tissoires
Post-2013 Lenovo laptops provide correct min/max dimensions, which are different with the ones currently quirked. According to https://bugzilla.kernel.org/show_bug.cgi?id=91541 the following board ids are assigned in the post-2013 touchpads: t440p/t440s: LEN0036 -> 2964/2962 t540p: LEN0034 -> 2964 Using 2961 as the common minimum makes these 3 laptops OK. We may need to update those values later if other pnp_ids has a lower board_id. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08Input: synaptics - support min/max board id in min_max_pnpid_tableDaniel Martin
Add a min/max range for board ids to the min/max coordinates quirk. This makes it possible to restrict quirks to specific models based upon their board id. The define ANY_BOARD_ID (0) serves as a wild card. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=91541 Cc: stable@vger.kernel.org Signed-off-by: Daniel Martin <daniel.martin@secunet.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08Input: synaptics - remove obsolete min/max quirk for X240Daniel Martin
The firmware of the X240 (LEN0035, 2013/12) exposes the same values x [1232..5710], y [1156..4696] as the quirk applies. Cc: stable@vger.kernel.org Signed-off-by: Daniel Martin <consume.noise@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08Input: synaptics - query min dimensions for fw v8.1Daniel Martin
Query the min dimensions even if the check SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 fails, but we know that the firmware version 8.1 is safe. With that we don't need quirks for post-2013 models anymore as they expose correct min and max dimensions. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=91541 Cc: stable@vger.kernel.org Signed-off-by: Daniel Martin <consume.noise@gmail.com> re-order the tests to check SYN_CAP_MIN_DIMENSIONS even on FW 8.1 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08Input: synaptics - log queried and quirked dimension valuesDaniel Martin
Logging the dimension values we queried and the values we use from a quirk to overwrite can be helpful for debugging. This partly relates to bug: https://bugzilla.kernel.org/show_bug.cgi?id=91541 Cc: stable@vger.kernel.org Signed-off-by: Daniel Martin <consume.noise@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08Input: synaptics - split synaptics_resolution(), query firstDaniel Martin
Split the function synaptics_resolution() into synaptics_resolution() and synaptics_quirks(). synaptics_resolution() will be called before synaptics_quirks() to query dimensions and resolutions before overwriting them with quirks. Cc: stable@vger.kernel.org Signed-off-by: Daniel Martin <consume.noise@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-06Input: synaptics - switch ForcePad detection to PNP IDsDmitry Torokhov
According to Synaptics devices with ForcePads use SYN300D and SYN3014 as PNP IDs, so let's switch from DMI-bases detection scheme to PNP-based one, which should be more reliable. Suggested-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15Input: psmouse - use IS_ENABLED instead of homegrown codeDmitry Torokhov
Instead of having various protocols provide <protocol>_supported() functions, let's use IS_ENABLED() macro that works well in "if" statements. Acked-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15Merge branch 'bfin_rotary' into nextDmitry Torokhov
Merge bfin_rotary driver changes from Sonic Zhang.
2015-02-03Input: synaptics - use dmax in input_mt_assign_slotsBenjamin Tissoires
When tapping a clickpad with two fingers, there is a chance that the sensor sees first only one finger, and at the next scan only the second one. In this case, the sensors says that there has been only one finger on the clickpad, which moved really fast between two scans. We can try to counter this by adding a limit to what an actual finger can move between 2 scans. A distance of 1cm between two scans for one finger seems reasonable. However, this is not really accurate because the resolution in X and in Y differs. But heh, that's how the in-kernel tracking works right now, and its job is quite good, even with this approximation. This parameter solves most of the jumps observed, not all of them however. But this is a hardware defect, and we might not be able to get something better without much heavier computations. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76722 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-01Input: MT - add support for balanced slot assignmentHenrik Rydberg
Some devices are not fast enough to differentiate between a fast-moving contact and a new contact. This problem cannot be fully resolved because information is truly missing, but it is possible to safe-guard against obvious mistakes by restricting movement with a maximum displacement. The new problem formulation for dmax > 0 cannot benefit from the speedup for positive definite matrices, but since the convergence is faster, the result is about the same. For a handful of contacts, the latency difference is truly negligible. Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Henrik Rydberg <rydberg@bitmath.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-01-19Input: synaptics - adjust min/max for Lenovo ThinkPad X1 Carbon 2ndPeter Hutterer
LEN0037 found in the Lenovo ThinkPad X1 Carbon 2nd (2014 model) Cc: stable@vger.kernel.org Reported-and-tested-by: Bjoern Olausson <bjoern@olausson.de> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-01-15Merge tag 'v3.19-rc4' into nextDmitry Torokhov
Merge with mainline to bring in the latest thermal and other changes.
2014-12-29Input: synaptics - remove duplicated codeBenjamin Tissoires
synaptics_profile_sensor_process() and synaptics_report_mt_data() now share the exact same code. Remove one implementation and rely on the other where it was used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-29Input: synaptics - use in-kernel tracking for reporting mt dataBenjamin Tissoires
The current code tries to consider all states and transitions to properly detect which finger is attached to which slot. The code is quite huge and difficult to read. If the sensor manages to group the touch points but is not reliable in giving tracking ids, we can simply use the kernel tracking method. Note that it is already used by Cr-48 Chromebooks. Incidentaly, this fixes a bug reported by Peter Hutterer: """ on the Lenovo T440, run: evemu-record /dev/input/event4 | grep BTN_ then put one, two, three, two fingers down when you go from 3 to 2 fingers the driver sends a spurious BTN_TOUCH 0 event: E: 0.000000 0001 014a 0001 # EV_KEY / BTN_TOUCH 1 E: 0.000000 0001 0145 0001 # EV_KEY / BTN_TOOL_FINGER 1 E: 0.770008 0001 0145 0000 # EV_KEY / BTN_TOOL_FINGER 0 E: 0.770008 0001 014d 0001 # EV_KEY / BTN_TOOL_DOUBLETAP 1 E: 1.924716 0001 014d 0000 # EV_KEY / BTN_TOOL_DOUBLETAP 0 E: 1.924716 0001 014e 0001 # EV_KEY / BTN_TOOL_TRIPLETAP 1 .. changing from 3 to 2 fingers now E: 3.152641 0001 014a 0000 # EV_KEY / BTN_TOUCH 0 E: 3.152641 0001 014d 0001 # EV_KEY / BTN_TOOL_DOUBLETAP 1 E: 3.152641 0001 014e 0000 # EV_KEY / BTN_TOOL_TRIPLETAP 0 E: 3.176948 0001 014a 0001 # EV_KEY / BTN_TOUCH 1 quick look in the kernel shows it's caused by hw.z going to 0 for a packet, so probably a firmware bug. either way, it makes it hard to track BTN_TOUCH as signal that at least one finger is down. """ The in-kernel tracking is enough to remove this spurious BTN_TOUCH 0. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-16Input: synaptics - adjust min/max on Thinkpad E540Ben Sagal
The LEN2006 Synaptics touchpad (as found in Thinkpad E540) returns wrong min max values. touchpad-edge-detector output: > Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event6 > Move one finger around the touchpad to detect the actual edges > Kernel says: x [1472..5674], y [1408..4684] > Touchpad sends: x [1264..5675], y [1171..4688] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88211 Cc: stable@vger.kernel.org Signed-off-by: Binyamin Sagal <bensagal@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-06Input: synaptics - add min/max quirk for Lenovo T440sTakashi Iwai
The new Lenovo T440s laptop has a different PnP ID "LEN0039", and it needs the similar min/max quirk to make its clickpad working. BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=903748 Reported-and-tested-by: Joschi Brauchle <joschibrauchle@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-11Input: synaptics - gate forcepad support by DMI checkDmitry Torokhov
Unfortunately, ForcePad capability is not actually exported over PS/2, so we have to resort to DMI checks. Cc: stable@vger.kernel.org Reported-by: Nicole Faerber <nicole.faerber@kernelconcepts.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-11Merge tag 'v3.17' into nextDmitry Torokhov
Synchronize with mainline to bring in changes to Synaptics and i8042 drivers.
2014-09-12Input: psmouse - add psmouse_matches_pnp_id helper functionHans de Goede
The matches_pnp_id function from the synaptics driver is useful for other drivers too. Make it a generic psmouse helper function. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-09Input: synaptics - add support for ForcePadsDmitry Torokhov
ForcePads are found on HP EliteBook 1040 laptops. They lack any kind of physical buttons, instead they generate primary button click when user presses somewhat hard on the surface of the touchpad. Unfortunately they also report primary button click whenever there are 2 or more contacts on the pad, messing up all multi-finger gestures (2-finger scrolling, multi-finger tapping, etc). To cope with this behavior we introduce a delay (currently 50 msecs) in reporting primary press in case more contacts appear. Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-14Merge branch 'next' into for-linusDmitry Torokhov
Prepare second round of input updates for 3.17.
2014-08-08Input: synaptics - use firmware data for Cr-48Henrik Rydberg
The profile sensor clickpad in a Cr-48 Chromebook does a reasonable job of tracking individual fingers. This tracking isn't perfect, but, experiments show that it works better than just passing "semi-mt" data to userspace, and making userspace try to deduce where the fingers are given a bounding box. This patch tries to report correct two-finger positions instead of the {(min_x, min_y), (max_x, max_y)} for profile sensor clickpads on Cr-48 chromebooks. Note that this device's firmware always reports the higher (smaller y) finger in the "sgm" packet, and the lower (larger y) finger in the "agm" packet. Thus, when a new finger arrives on the pad, the kernel driver uses input core's contact tracking facilities to match contacts with slots. Inspired by patch by Daniel Kurtz <djkurtz@chromium.org> and Chung-yih Wang <cywang@chromium.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-07Input: synaptics - properly initialize slots for semi-MTDmitry Torokhov
Semi-MT devices are pointers too, so let's tell that to input_mt_init_slots(), as well as let it set up the devices as semi-MT, instead of us doing it manually. Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-14Input: synaptics - add min/max quirk for pnp-id LEN2002 (Edge E531)Hans de Goede
https://bugzilla.redhat.com/show_bug.cgi?id=1114768 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-06-07Input: synaptics - fix resolution for manually provided min/maxBenjamin Tissoires
commit 421e08c41fda fixed the reported min/max for the X and Y axis, but unfortunately, it broke the resolution of those same axis. On the t540p, the resolution is the same regarding X and Y. It is not a problem for xf86-input-synaptics because this driver is only interested in the ratio between X and Y. Unfortunately, xf86-input-cmt uses directly the resolution, and having a null resolution leads to some divide by 0 errors, which are translated by -infinity in the resulting coordinates. Reported-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-26Input: synaptics - change min/max quirk table to pnp-id matchingHans de Goede
Most of the affected models share pnp-ids for the touchpad. So switching to pnp-ids give us 2 advantages: 1) It shrinks the quirk list 2) It will lower the new quirk addition frequency, ie the recently added W540 quirk would not have been necessary since it uses the same LEN0034 pnp ids as other models already added before it As an added bonus it actually puts the quirk on the actual psmouse, rather then on the machine, which is technically more correct. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-26Input: synaptics - add a matches_pnp_id helper functionHans de Goede
This is a preparation patch for simplifying the min/max quirk table. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-26Input: synaptics - T540p - unify with other LEN0034 modelsHans de Goede
The T540p has a touchpad with pnp-id LEN0034, all the models with this pnp-id have the same min/max values, except the T540p where the values are slightly off. Fix them to be identical. This is a preparation patch for simplifying the quirk table. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-26 19:26:12 +0000