| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 89e637c19b2441aabc8dbf22a8745b932fd6996e ]
Although the code for residual handling in the SRP initiator follows the
SCSI documentation, that documentation has never been correct. Because
scsi_finish_command() starts from the data buffer length and subtracts the
residual, scsi_set_resid() must not be called if a residual overflow
occurs. Hence remove the scsi_set_resid() calls from the SRP initiator if a
residual overflow occurrs.
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Fixes: 9237f04e12cc ("scsi: core: Fix scsi_get/set_resid() interface")
Fixes: e714531a349f ("IB/srp: Fix residual handling")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230724200843.3376570-3-bvanassche@acm.org
Acked-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
|
|
Make it explicit that the SRP host template is not modified.
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230322195515.1267197-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, in dynamic_debug.h we only provide
DEFINE_DYNAMIC_DEBUG_METADATA() and DYNAMIC_DEBUG_BRANCH()
definitions if CONFIG_DYNAMIC_CORE is enabled. Thus, drivers
such as infiniband srp (see: drivers/infiniband/ulp/srp/ib_srp.c)
must provide their own definitions for !CONFIG_DYNAMIC_CORE.
Thus, let's move this !CONFIG_DYNAMIC_CORE case into dynamic_debug.h.
However, the dynamic debug interfaces should really only be defined
if CONFIG_DYNAMIC_DEBUG is set or CONFIG_DYNAMIC_CORE is set along
with DYNAMIC_DEBUG_MODULE, (see:
Documentation/admin-guide/dynamic-debug-howto.rst). Thus, the
undefined case becomes: !((CONFIG_DYNAMIC_DEBUG ||
(CONFIG_DYNAMIC_CORE && DYNAMIC_DEBUG_MODULE)).
With those changes in place, we can remove the !CONFIG_DYNAMIC_CORE
case from ib_srp.c
This change was prompted by a build breakeage in ib_srp.c stemming
from the inclusion of dynamic_debug.h unconditionally in module.h, due
to commit 7deabd674988 ("dyndbg: use the module notifier callbacks").
In that case, if we have CONFIG_DYNAMIC_CORE=y and
CONFIG_DYNAMIC_DEBUG=n then the definitions for
DEFINE_DYNAMIC_DEBUG_METADATA() and DYNAMIC_DEBUG_BRANCH() are defined
once in ib_srp.c and then again in the dynamic_debug.h. This had been
working prior to the above referenced commit because dynamic_debug.h
was only pulled into ib_srp.c conditinally via printk.h if
CONFIG_DYNAMIC_DEBUG was set.
Also, the exported functions in lib/dynamic_debug.c itself may
not have a prototype if CONFIG_DYNAMIC_DEBUG=n and
CONFIG_DYNAMIC_CORE=y. This would trigger the -Wmissing-prototypes
warning.
The exported functions are behind (include/linux/dynamic_debug.h):
if defined(CONFIG_DYNAMIC_DEBUG) || \
(defined(CONFIG_DYNAMIC_DEBUG_CORE) && defined(DYNAMIC_DEBUG_MODULE))
Thus, by adding -DDYNAMIC_CONFIG_MODULE to the lib/Makefile we
can ensure that the exported functions have a prototype in all cases,
since lib/dynamic_debug.c is built whenever
CONFIG_DYNAMIC_DEBUG_CORE=y.
Fixes: 7deabd674988 ("dyndbg: use the module notifier callbacks")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303071444.sIbZTDCy-lkp@intel.com/
Signed-off-by: Jason Baron <jbaron@akamai.com>
[mcgrof: adjust commit log, and remove urldefense from URL]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Refactors based on comments [1] of the multiple path records support
patchset:
- Return failure if not able to set inbound/outbound PRs;
- Simplify the flow when receiving the PRs from netlink channel: When
a good PR response is received, unpack it and call the path_query
callback directly. This saves two memory allocations;
- Define RDMA_PRIMARY_PATH_MAX_REC_NUM in a proper place.
[1] https://lore.kernel.org/linux-rdma/Yyxp9E9pJtUids2o@nvidia.com/
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org> #srp
Link: https://lore.kernel.org/r/7610025d57342b8b6da0f19516c9612f9c3fdc37.1672819376.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In the previous iteration of the while loop, the "ret" may have been
assigned a value of 0, so the error return code -EINVAL may have been
incorrectly set to 0. To fix set valid return code before calling to
goto. Also investigate each case separately as Andy suggessted.
Fixes: e711f968c49c ("IB/srp: replace custom implementation of hex2bin()")
Fixes: 2a174df0c602 ("IB/srp: Use kstrtoull() instead of simple_strtoull()")
Fixes: 19f313438c77 ("IB/srp: Add RDMA/CM support")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1669953638-11747-2-git-send-email-wangyufen@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Trvial merge conflicts against rdma.git for-rc resolved matching
linux-next:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c
drivers/infiniband/hw/hns/hns_roce_main.c
https://lore.kernel.org/r/20220929124005.105149-1-broonie@kernel.org
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Currently ib_srp module does not support devices with more than 256
ports. Switch from u8 to u32 to fix the problem.
Fixes: 1fb7f8973f51 ("RDMA: Support more than 255 rdma ports")
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Mikhael Goikhman <migo@nvidia.com>
Link: https://lore.kernel.org/r/7d80d8844f1abb3a54170b7259f0a02be38080a6.1663747327.git.leonro@nvidia.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Support receiving inbound and outbound IB path records (along with GMP
PathRecord) from user-space service through the RDMA netlink channel.
The LIDs in these 3 PRs can be used in this way:
1. GMP PR: used as the standard local/remote LIDs;
2. DLID of outbound PR: Used as the "dlid" field for outbound traffic;
3. DLID of inbound PR: Used as the "dlid" field for outbound traffic in
responder side.
This is aimed to support adaptive routing. With current IB routing
solution when a packet goes out it's assigned with a fixed DLID per
target, meaning a fixed router will be used.
The LIDs in inbound/outbound path records can be used to identify group
of routers that allow communication with another subnet's entity. With
them packets from an inter-subnet connection may travel through any
router in the set to reach the target.
As confirmed with Jason, when sending a netlink request, kernel uses
LS_RESOLVE_PATH_USE_ALL so that the service knows kernel supports
multiple PRs.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/2fa2b6c93c4c16c8915bac3cfc4f27be1d60519d.1662631201.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Fix the code for converting a SCSI command pointer into an SRP request
pointer.
Cc: Xiao Yang <yangx.jy@fujitsu.com>
Fixes: ad215aaea4f9 ("RDMA/srp: Make struct scsi_cmnd and struct srp_request adjacent")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220908233139.3042628-1-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This change fixes the following kernel NULL pointer dereference
which is reproduced by blktests srp/007 occasionally.
BUG: kernel NULL pointer dereference, address: 0000000000000170
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 9 Comm: kworker/0:1H Kdump: loaded Not tainted 6.0.0-rc1+ #37
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-29-g6a62e0cb0dfe-prebuilt.qemu.org 04/01/2014
Workqueue: 0x0 (kblockd)
RIP: 0010:srp_recv_done+0x176/0x500 [ib_srp]
Code: 00 4d 85 ff 0f 84 52 02 00 00 48 c7 82 80 02 00 00 00 00 00 00 4c 89 df 4c 89 14 24 e8 53 d3 4a f6 4c 8b 14 24 41 0f b6 42 13 <41> 89 87 70 01 00 00 41 0f b6 52 12 f6 c2 02 74 44 41 8b 42 1c b9
RSP: 0018:ffffaef7c0003e28 EFLAGS: 00000282
RAX: 0000000000000000 RBX: ffff9bc9486dea60 RCX: 0000000000000000
RDX: 0000000000000102 RSI: ffffffffb76bbd0e RDI: 00000000ffffffff
RBP: ffff9bc980099a00 R08: 0000000000000001 R09: 0000000000000001
R10: ffff9bca53ef0000 R11: ffff9bc980099a10 R12: ffff9bc956e14000
R13: ffff9bc9836b9cb0 R14: ffff9bc9557b4480 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff9bc97ec00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000170 CR3: 0000000007e04000 CR4: 00000000000006f0
Call Trace:
<IRQ>
__ib_process_cq+0xb7/0x280 [ib_core]
ib_poll_handler+0x2b/0x130 [ib_core]
irq_poll_softirq+0x93/0x150
__do_softirq+0xee/0x4b8
irq_exit_rcu+0xf7/0x130
sysvec_apic_timer_interrupt+0x8e/0xc0
</IRQ>
Fixes: ad215aaea4f9 ("RDMA/srp: Make struct scsi_cmnd and struct srp_request adjacent")
Link: https://lore.kernel.org/r/20220831081626.18712-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Simplify the SRP driver by using the attribute group mechanism instead
of calling device_create_file() explicitly.
Link: https://lore.kernel.org/r/20220825213900.864587-5-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Instead of ignoring dev_set_name() failure, handle dev_set_name()
failure. Convert a device_register() call into device_initialize() and
device_add() calls.
Link: https://lore.kernel.org/r/20220825213900.864587-4-bvanassche@acm.org
Reported-by: Bo Liu <liubo03@inspur.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Move the kfree(host) calls into srp_release_dev(). Convert a
device_unregister() call into a device_del() and a device_put() call.
Remove the host->released completion object. This patch prepares for
handling dev_set_name() failure in srp_add_port().
Link: https://lore.kernel.org/r/20220825213900.864587-3-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
device_register() always calls device_initialize() so calling device_del()
is safe even if device_register() fails. Implement the following advice
from the comment block above device_register(): "NOTE: _Never_ directly free
@dev after calling this function, even if it returned an error! Always use
put_device() to give up the reference initialized in this function instead."
Keep the kfree() call in the error path since srp_release_dev() does not
free the host.
Link: https://lore.kernel.org/r/20220825213900.864587-2-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
We no longer use the 'reserved' arg in busy_tag_iter_fn for any iter
function so it may be dropped.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me> #nvme
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/1657109034-206040-6-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split out flags from ib_device::device_cap_flags that are only used
internally to the kernel into kernel_cap_flags that is not part of the
uapi. This limits the device_cap_flags to being the same bitmap that will
be copied to userspace.
This cleanly splits out the uverbs flags from the kernel flags to avoid
confusion in the flags bitmap.
Add some short comments describing which each of the kernel flags is
connected to. Remove unused kernel flags.
Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Remove the flush_workqueue(system_long_wq) call since flushing
system_long_wq is deadlock-prone and since that call is redundant with a
preceding cancel_work_sync()
Link: https://lore.kernel.org/r/20220215210511.28303-3-bvanassche@acm.org
Fixes: ef6c49d87c34 ("IB/srp: Eliminate state SRP_TARGET_DEAD")
Reported-by: syzbot+831661966588c802aae9@syzkaller.appspotmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-5-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Conditional statements are faster than indirect calls. Hence call
scsi_done() directly.
Link: https://lore.kernel.org/r/20211007202923.2174984-6-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-10-bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers.
The major core change is a rework to drop the status byte handling
macros and the old bit shifted definitions and the rest of the updates
are minor fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
scsi: aha1740: Avoid over-read of sense buffer
scsi: arcmsr: Avoid over-read of sense buffer
scsi: ips: Avoid over-read of sense buffer
scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
scsi: elx: libefc: Fix less than zero comparison of a unsigned int
scsi: elx: efct: Fix pointer error checking in debugfs init
scsi: elx: efct: Fix is_originator return code type
scsi: elx: efct: Fix link error for _bad_cmpxchg
scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
scsi: elx: efct: Fix error handling in efct_hw_init()
scsi: elx: efct: Remove redundant initialization of variable lun
scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
scsi: lpfc: Fix build error in lpfc_scsi.c
scsi: target: iscsi: Remove redundant continue statement
scsi: qla4xxx: Remove redundant continue statement
scsi: ppa: Switch to use module_parport_driver()
scsi: imm: Switch to use module_parport_driver()
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
...
|
|
Originally the SCSI subsystem has been using 'special' SCSI status codes,
which were the SAM-specified ones but shifted by 1. As most drivers have
now been modified to use the SAM-specified ones, having two nearly
identical sets of definitions only causes confusion.
The Linux-specifed SCSI status codes have been marked obsolete for several
years so drop them and use the SAM-specified status codes throughout.
Link: https://lore.kernel.org/r/20210427083046.31620-41-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use DEVICE_ATTR_*() helpers instead of plain DEVICE_ATTR, which makes the
code a bit shorter and easier to read.
Link: https://lore.kernel.org/r/20210528125750.20788-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Define .init_cmd_priv and .exit_cmd_priv callback functions in struct
scsi_host_template. Set .cmd_size such that the SCSI core allocates
per-command private data. Use scsi_cmd_priv() to access that private
data. Remove the req_ring pointer from struct srp_rdma_ch since it is no
longer necessary. Convert srp_alloc_req_data() and srp_free_req_data()
into functions that initialize one instance of the SRP-private command
data. This is a micro-optimization since this patch removes several
pointer dereferences from the hot path.
Note: due to commit e73a5e8e8003 ("scsi: core: Only return started
requests from scsi_host_find_tag()"), it is no longer necessary to protect
the completion path against duplicate responses.
Link: https://lore.kernel.org/r/20210524041211.9480-6-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Only allocate a memory registration list if it will be used and if it will
be freed.
Link: https://lore.kernel.org/r/20210524041211.9480-5-bvanassche@acm.org
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Fixes: f273ad4f8d90 ("RDMA/srp: Remove support for FMR memory registration")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Before modifying how the __packed attribute is used, add compile time
size checks for the structures that will be modified.
Link: https://lore.kernel.org/r/20210524041211.9480-3-bvanassche@acm.org
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Cc: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The current code computes a number of channels per SRP target and spreads
them equally across all online NUMA nodes. Each channel is then assigned
a CPU within this node.
In the case of unbalanced, or even unpopulated nodes, some channels do not
get a CPU associated and thus do not get connected. This causes the SRP
connection to fail.
This patch solves the issue by rewriting channel computation and
allocation:
- Drop channel to node/CPU association as it had no real effect on
locality but added unnecessary complexity.
- Tweak the number of channels allocated to reduce CPU contention when
possible:
- Up to one channel per CPU (instead of up to 4 by node)
- At least 4 channels per node, unless ch_count module parameter is
used.
Link: https://lore.kernel.org/r/9cb4d9d3-30ad-2276-7eff-e85f7ddfb411@suse.com
Signed-off-by: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Manual changes for sysfs_emit as cocci scripts can't easily convert them.
Link: https://lore.kernel.org/r/ecde7791467cddb570c6f6d2c908ffbab9145cac.1602122880.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Make changes to use sysfs_emit in the RDMA code as cocci scripts can not
be written to handle _all_ the possible variants of various sprintf family
uses in sysfs show functions.
While there, make the code more legible and update its style to be more
like the typical kernel styles.
Miscellanea:
o Use intermediate pointers for dereferences
o Add and use string lookup functions
o return early when any intermediate call fails so normal return is
at the bottom of the function
o mlx4/mcg.c:sysfs_show_group: use scnprintf to format intermediate strings
Link: https://lore.kernel.org/r/f5c9e4c9d8dafca1b7b70bd597ee7f8f219c31c8.1602122880.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Done with cocci script:
@@
identifier d_show;
identifier dev, attr, buf;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- sprintf(buf,
+ sysfs_emit(buf,
...);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- snprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- scnprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
expression chr;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- strcpy(buf, chr);
+ sysfs_emit(buf, chr);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
len =
- sprintf(buf,
+ sysfs_emit(buf,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
len =
- snprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
len =
- scnprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
- len += scnprintf(buf + len, PAGE_SIZE - len,
+ len += sysfs_emit_at(buf, len,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
expression chr;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
...
- strcpy(buf, chr);
- return strlen(buf);
+ return sysfs_emit(buf, chr);
}
Link: https://lore.kernel.org/r/7f406fa8e3aa2552c022bec680f621e38d1fe414.1602122879.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
FMR is not supported on most recent RDMA devices (that use fast memory
registration mechanism). Also, FMR was recently removed from NFS/RDMA
ULP.
Link: https://lore.kernel.org/r/2-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Increase the flexibility of the SRP initiator driver by making the channel
count configurable per target instead of only providing a kernel module
parameter for configuring the channel count.
Link: https://lore.kernel.org/r/20200525172212.14413-2-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When a client is added it isn't allowed to fail, but all the client's have
various failure paths within their add routines.
This creates the very fringe condition where the client was added, failed
during add and didn't set the client_data. The core code will then still
call other client_data centric ops like remove(), rename(), get_nl_info(),
and get_net_dev_by_params() with NULL client_data - which is confusing and
unexpected.
If the add() callback fails, then do not call any more client ops for the
device, even remove.
Remove all the now redundant checks for NULL client_data in ops callbacks.
Update all the add() callbacks to return error codes
appropriately. EOPNOTSUPP is used for cases where the ULP does not support
the ib_device - eg because it only works with IB.
Link: https://lore.kernel.org/r/20200421172440.387069-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Some SRP targets that do not support specification SRP-2, put the garbage
to the reserved bits of the SRP login response. The problem was not
detected for a long time because the SRP initiator ignored those bits. But
now one of them is used as SRP_LOGIN_RSP_IMMED_SUPP. And it causes a
critical error on the target when the initiator sends immediate data.
The ib_srp module has a use_imm_date parameter to enable or disable
immediate data manually. But it does not help in the above case, because
use_imm_date is ignored at handling the SRP login response. The problem is
definitely caused by a bug on the target side, but the initiator's
behavior also does not look correct. The initiator should not use
immediate data if use_imm_date is disabled by a user.
This commit adds an additional checking of use_imm_date at the handling of
SRP login response to avoid unexpected use of immediate data.
Fixes: 882981f4a411 ("RDMA/srp: Add support for immediate data")
Link: https://lore.kernel.org/r/20200115133055.30232-1-sergeygo@mellanox.com
Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Long-time missing new-line in sysfs output.
Simply add it.
Signed-off-by: Donald Dutile <ddutile@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20191009164937.21989-1-ddutile@redhat.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The default maximum immediate size is too big for old srp clients, which
do not support immediate data.
According to the SRP and SRP-2 specifications, the IOControllerProfile
attributes for SRP target ports contains the maximum initiator to target
iu length.
The maximum initiator to target iu length can be obtained by sending MAD
packets to query subnet manager port and SRP target ports. We should
calculate the max_it_iu_size instead of the default value, when remote
maximum initiator to target iu length available.
Link: https://lore.kernel.org/r/20190927174352.7800-2-honli@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
According to SRP specifications 'srp-r16a' and 'srp2r06',
IOControllerProfile attributes for SRP target port include the maximum
initiator to target IU size.
SRP connection daemons, such as srp_daemon, can get the value from the
subnet manager. The SRP connection daemon can pass this value to kernel.
This patch adds a parse function for it.
Upstream commit [1] enables the kernel parameter, 'use_imm_data', by
default. [1] also use (8 * 1024) as the default value for kernel parameter
'max_imm_data'. With those default values, the maximum initiator to target
IU size will be 8260.
In case the SRPT modules, which include the in-tree 'ib_srpt.ko' module,
do not support SRP-2 'immediate data' feature, the default maximum
initiator to target IU size is significantly smaller than 8260. For
'ib_srpt.ko' module, which built from source before [2], the default
maximum initiator to target IU is 2116.
[1] introduces a regression issue for old srp targets with default kernel
parameters, as the connection will be rejected because of a too large
maximum initiator to target IU size.
[1] commit 882981f4a411 ("RDMA/srp: Add support for immediate data")
[2] commit 5dabcd0456d7 ("RDMA/srpt: Add support for immediate data")
Link: https://lore.kernel.org/r/20190927174352.7800-1-honli@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The IPv6 scope ID is essential when setting up an iWARP connection
between IPv6 link-local addresses. Report the scope ID in error messages.
Link: https://lore.kernel.org/r/20190930231707.48259-9-bvanassche@acm.org
Cc: Honggang LI <honli@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Instead of assuming that max_send_sge >= 3, restrict the number of scatter
gather elements to what is supported by the RDMA adapter.
Link: https://lore.kernel.org/r/20190930231707.48259-8-bvanassche@acm.org
Cc: Honggang LI <honli@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch does not change any functionality.
Link: https://lore.kernel.org/r/20190930231707.48259-7-bvanassche@acm.org
Cc: Honggang LI <honli@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is the final round of mostly small fixes in our initial submit.
It's mostly minor fixes and driver updates. The only change of note is
adding a virt_boundary_mask to the SCSI host and host template to
parametrise this for NVMe devices instead of having them do a call in
slave_alloc. It's a fairly straightforward conversion except in the
two NVMe handling drivers that didn't set it who now have a virtual
infinity parameter added"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: megaraid_sas: set an unlimited max_segment_size
scsi: mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs
scsi: IB/srp: set virt_boundary_mask in the scsi host
scsi: IB/iser: set virt_boundary_mask in the scsi host
scsi: storvsc: set virt_boundary_mask in the scsi host template
scsi: ufshcd: set max_segment_size in the scsi host template
scsi: core: take the DMA max mapping size into account
scsi: core: add a host / host template field for the virt boundary
scsi: core: Fix race on creating sense cache
scsi: sd_zbc: Fix compilation warning
scsi: libfc: fix null pointer dereference on a null lport
scsi: zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized
scsi: zfcp: fix request object use-after-free in send path causing wrong traces
scsi: zfcp: fix request object use-after-free in send path causing seqno errors
scsi: megaraid_sas: Update driver version to 07.710.50.00
scsi: megaraid_sas: Add module parameter for FW Async event logging
scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllers
scsi: megaraid_sas: Fix calculation of target ID
scsi: lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE
scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade
...
|
|
This ensures all proper DMA layer handling is taken care of by the SCSI
midlayer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull rdma updates from Jason Gunthorpe:
"A smaller cycle this time. Notably we see another new driver, 'Soft
iWarp', and the deletion of an ancient unused driver for nes.
- Revise and simplify the signature offload RDMA MR APIs
- More progress on hoisting object allocation boiler plate code out
of the drivers
- Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib,
i40iw
- Tree wide cleanups: struct_size, put_user_page, xarray, rst doc
conversion
- Removal of obsolete ib_ucm chardev and nes driver
- netlink based discovery of chardevs and autoloading of the modules
providing them
- Move more of the rdamvt/hfi1 uapi to include/uapi/rdma
- New driver 'siw' for software based iWarp running on top of netdev,
much like rxe's software RoCE.
- mlx5 feature to report events in their raw devx format to userspace
- Expose per-object counters through rdma tool
- Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
from netdev"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits)
RMDA/siw: Require a 64 bit arch
RDMA/siw: Mark expected switch fall-throughs
RDMA/core: Fix -Wunused-const-variable warnings
rdma/siw: Remove set but not used variable 's'
rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS
RDMA/siw: Add missing rtnl_lock around access to ifa
rdma/siw: Use proper enumerated type in map_cqe_status
RDMA/siw: Remove unnecessary kthread create/destroy printouts
IB/rdmavt: Fix variable shadowing issue in rvt_create_cq
RDMA/core: Fix race when resolving IP address
RDMA/core: Make rdma_counter.h compile stand alone
IB/core: Work on the caller socket net namespace in nldev_newlink()
RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
RDMA/mlx5: Set RDMA DIM to be enabled by default
RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink
RDMA/core: Provide RDMA DIM support for ULPs
linux/dim: Implement RDMA adaptive moderation (DIM)
IB/mlx5: Report correctly tag matching rendezvous capability
docs: infiniband: add it to the driver-api bookset
IB/mlx5: Implement VHCA tunnel mechanism in DEVX
...
|
|
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
removal of the osst driver (I heard from Willem privately that he
would like the driver removed because all his test hardware has
failed). Plus number of minor changes, spelling fixes and other
trivia.
The big merge conflict this time around is the SPDX licence tags.
Following discussion on linux-next, we believe our version to be more
accurate than the one in the tree, so the resolution is to take our
version for all the SPDX conflicts"
Note on the SPDX license tag conversion conflicts: the SCSI tree had
done its own SPDX conversion, which in some cases conflicted with the
treewide ones done by Thomas & co.
In almost all cases, the conflicts were purely syntactic: the SCSI tree
used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the
treewide conversion had used the new-style ones ("GPL-2.0-only" and
"GPL-2.0-or-later").
In these cases I picked the new-style one.
In a few cases, the SPDX conversion was actually different, though. As
explained by James above, and in more detail in a pre-pull-request
thread:
"The other problem is actually substantive: In the libsas code Luben
Tuikov originally specified gpl 2.0 only by dint of stating:
* This file is licensed under GPLv2.
In all the libsas files, but then muddied the water by quoting GPLv2
verbatim (which includes the or later than language). So for these
files Christoph did the conversion to v2 only SPDX tags and Thomas
converted to v2 or later tags"
So in those cases, where the spdx tag substantially mattered, I took the
SCSI tree conversion of it, but then also took the opportunity to turn
the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag.
Similarly, when there were whitespace differences or other differences
to the comments around the copyright notices, I took the version from
the SCSI tree as being the more specific conversion.
Finally, in the spdx conversions that had no conflicts (because the
treewide ones hadn't been done for those files), I just took the SCSI
tree version as-is, even if it was old-style. The old-style conversions
are perfectly valid, even if the "-only" and "-or-later" versions are
perhaps more descriptive.
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits)
scsi: qla2xxx: move IO flush to the front of NVME rport unregistration
scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition
scsi: qla2xxx: on session delete, return nvme cmd
scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices
scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1
scsi: megaraid_sas: Introduce various Aero performance modes
scsi: megaraid_sas: Use high IOPS queues based on IO workload
scsi: megaraid_sas: Set affinity for high IOPS reply queues
scsi: megaraid_sas: Enable coalescing for high IOPS queues
scsi: megaraid_sas: Add support for High IOPS queues
scsi: megaraid_sas: Add support for MPI toolbox commands
scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver
scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
scsi: megaraid_sas: Handle sequence JBOD map failure at driver level
scsi: megaraid_sas: Don't send FPIO to RL Bypass queue
scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
scsi: megaraid_sas: Call disable_irq from process IRQ poll
scsi: megaraid_sas: Remove few debug counters from IO path
...
|
|
For dependencies in next patches.
Resolve conflicts:
- Use uverbs_get_cleared_udata() with new cq allocation flow
- Continue to delete nes despite SPDX conflict
- Resolve list appends in mlx5_command_str()
- Use u16 for vport_rule stuff
- Resolve list appends in struct ib_client
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The previous patch guarantees that srp_queuecommand() does not get
invoked while reconnecting occurs. Hence remove the code from
srp_queuecommand() that prevents command queueing while reconnecting.
This patch avoids that the following can appear in the kernel log:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747
in_atomic(): 1, irqs_disabled(): 0, pid: 5600, name: scsi_eh_9
1 lock held by scsi_eh_9/5600:
#0: (rcu_read_lock){....}, at: [<00000000cbb798c7>] __blk_mq_run_hw_queue+0xf1/0x1e0
Preemption disabled at:
[<00000000139badf2>] __blk_mq_delay_run_hw_queue+0x78/0xf0
CPU: 9 PID: 5600 Comm: scsi_eh_9 Tainted: G W 4.15.0-rc4-dbg+ #1
Hardware name: Dell Inc. PowerEdge R720/0VWT90, BIOS 2.5.4 01/22/2016
Call Trace:
dump_stack+0x67/0x99
___might_sleep+0x16a/0x250 [ib_srp]
__mutex_lock+0x46/0x9d0
srp_queuecommand+0x356/0x420 [ib_srp]
scsi_dispatch_cmd+0xf6/0x3f0
scsi_queue_rq+0x4a8/0x5f0
blk_mq_dispatch_rq_list+0x73/0x440
blk_mq_sched_dispatch_requests+0x109/0x1a0
__blk_mq_run_hw_queue+0x131/0x1e0
__blk_mq_delay_run_hw_queue+0x9a/0xf0
blk_mq_run_hw_queue+0xc0/0x1e0
blk_mq_start_hw_queues+0x2c/0x40
scsi_run_queue+0x18e/0x2d0
scsi_run_host_queues+0x22/0x40
scsi_error_handler+0x18d/0x5f0
kthread+0x11c/0x140
ret_from_fork+0x24/0x30
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Doug Ledford <dledford@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The function srp_parse_in() is used both for parsing source address
specifications and for target address specifications. Target addresses
must have a port number. Having to specify a port number for source
addresses is inconvenient. Make sure that srp_parse_in() supports again
parsing addresses with no port number.
Cc: <stable@vger.kernel.org>
Fixes: c62adb7def71 ("IB/srp: Fix IPv6 address parsing")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
SRP logic used device name and port index as symlink to relevant
kobject. If the IB device is renamed then the prior name will be re-used
by the next device plugged in and sysfs will panic as SRP will try to
re-use the same name.
mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0
sysfs: cannot create duplicate filename '/class/infiniband_srp/srp-mlx5_0-1'
CPU: 3 PID: 1107 Comm: modprobe Not tainted 5.1.0-for-upstream-perf-2019-05-12_15-09-52-87 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
dump_stack+0x5a/0x73
sysfs_warn_dup+0x58/0x70
sysfs_do_create_link_sd.isra.2+0xa3/0xb0
device_add+0x33f/0x660
srp_add_one+0x301/0x4f0 [ib_srp]
add_client_context+0x99/0xe0 [ib_core]
enable_device_and_get+0xd1/0x1b0 [ib_core]
ib_register_device+0x533/0x710 [ib_core]
? mutex_lock+0xe/0x30
__mlx5_ib_add+0x23/0x70 [mlx5_ib]
mlx5_add_device+0x4e/0xd0 [mlx5_core]
mlx5_register_interface+0x85/0xc0 [mlx5_core]
? 0xffffffffa0791000
do_one_initcall+0x4b/0x1cb
? kmem_cache_alloc_trace+0xc6/0x1d0
? do_init_module+0x22/0x21f
do_init_module+0x5a/0x21f
load_module+0x17f2/0x1ca0
? m_show+0x1c0/0x1c0
__do_sys_finit_module+0x94/0xe0
do_syscall_64+0x48/0x120
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f157cce10d9
The module load/unload sequence was used to trigger such kernel panic:
sudo modprobe ib_srp
sudo modprobe -r mlx5_ib
sudo modprobe -r mlx5_core
sudo modprobe mlx5_core
Have SRP track the name of the core device so that it can't have a name
collision.
Fixes: d21943dd19b5 ("RDMA/core: Implement IB device rename function")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Pull rdma updates from Jason Gunthorpe:
"This has been a slightly more active cycle than normal with ongoing
core changes and quite a lot of collected driver updates.
- Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe
- A new data transfer mode for HFI1 giving higher performance
- Significant functional and bug fix update to the mlx5
On-Demand-Paging MR feature
- A chip hang reset recovery system for hns
- Change mm->pinned_vm to an atomic64
- Update bnxt_re to support a new 57500 chip
- A sane netlink 'rdma link add' method for creating rxe devices and
fixing the various unregistration race conditions in rxe's
unregister flow
- Allow lookup up objects by an ID over netlink
- Various reworking of the core to driver interface:
- drivers should not assume umem SGLs are in PAGE_SIZE chunks
- ucontext is accessed via udata not other means
- start to make the core code responsible for object memory
allocation
- drivers should convert struct device to struct ib_device via a
helper
- drivers have more tools to avoid use after unregister problems"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits)
net/mlx5: ODP support for XRC transport is not enabled by default in FW
IB/hfi1: Close race condition on user context disable and close
RDMA/umem: Revert broken 'off by one' fix
RDMA/umem: minor bug fix in error handling path
RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp
cxgb4: kfree mhp after the debug print
IB/rdmavt: Fix concurrency panics in QP post_send and modify to error
IB/rdmavt: Fix loopback send with invalidate ordering
IB/iser: Fix dma_nents type definition
IB/mlx5: Set correct write permissions for implicit ODP MR
bnxt_re: Clean cq for kernel consumers only
RDMA/uverbs: Don't do double free of allocated PD
RDMA: Handle ucontext allocations by IB/core
RDMA/core: Fix a WARN() message
bnxt_re: fix the regression due to changes in alloc_pbl
IB/mlx4: Increase the timeout for CM cache
IB/core: Abort page fault handler silently during owning process exit
IB/mlx5: Validate correct PD before prefetch MR
IB/mlx5: Protect against prefetch of invalid MR
RDMA/uverbs: Store PR pointer before it is overwritten
...
|
Bart Van Assche
Linus Torvalds
Jason Baron
Mark Zhang
Wang Yufen
Jason Gunthorpe
Mikhael Goikhman
yangx.jy@fujitsu.com
John Garry
Hannes Reinecke
YueHaibing
Nicolas Morey-Chaisemartin
Joe Perches
Max Gurtovoy
Jason Gunthorpe
Sergey Gorenko
Donald Dutile
Honggang Li
Christoph Hellwig
Leon Romanovsky