summaryrefslogtreecommitdiffstats
path: root/drivers/hwtracing/coresight/coresight-priv.h
AgeCommit message (Collapse)Author
2018-09-25coresight: Add support for CLAIM tag protocolSuzuki K Poulose
Coresight architecture defines CLAIM tags for a device to negotiate control of the components (external agent vs self-hosted). Each device has a pair of registers (CLAIMSET & CLAIMCLR) for managing the CLAIM tags. However, the protocol for the CLAIM tags is IMPLEMENTATION DEFINED. PSCI has recommendations for the use of the CLAIM tags to negotiate controls for external agent vs self-hosted use. This patch implements the recommended protocol by PSCI. The claim/disclaim operations are performed from the device specific drivers. The disadvantage is that the calls are sprinkled in each driver, but this makes the operation much simpler. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25coresight: perf: Remove set_buffer call backSuzuki K Poulose
In coresight perf mode, we need to prepare the sink before starting a session, which is done via set_buffer call back. We then proceed to enable the tracing. If we fail to start the session successfully, we leave the sink configuration unchanged. In order to make the operation atomic and to avoid yet another call back to clear the buffer, we get rid of the "set_buffer" call back and pass the buffer details via enable() call back to the sink. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15coresight: Add helper for inserting synchronization packetsSuzuki K Poulose
Right now we open code filling the trace buffer with synchronization packets when the circular buffer wraps around in different drivers. Move this to a common place. While at it, clean up the barrier_pkt array to strip off the trailing '\0'. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14coresight: Moving framework and drivers to SPDX identifierMathieu Poirier
Moving all kernel side CoreSight framework and drivers to SPDX identifier. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight tmc: Add helpers for accessing 64bit registersSuzuki K Poulose
Coresight TMC splits 64bit registers into a pair of 32bit registers (e.g DBA, RRP, RWP). Provide helpers to read/write to these registers. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: Add support for reading 64bit registersSuzuki K Poulose
Add support for reading a lower and upper 32bits of a register as a single 64bit register. Also add simplified macros for direct register accesses. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: Add barrier packet for synchronisationMathieu Poirier
When a buffer overflow happens the synchronisation patckets usually present at the beginning of the buffer are lost, a situation that prevents the decoder from knowing the context of the traces being decoded. This patch adds a barrier packet to be used by sink IPs when a buffer overflow condition is detected. These barrier packets are then used by the decoding library as markers to force re-synchronisation. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-16perf/core: Keep AUX flags in the output handleWill Deacon
In preparation for adding more flags to perf AUX records, introduce a separate API for setting the flags for a session, rather than appending more bool arguments to perf_aux_output_end. This allows to set each flag at the time a corresponding condition is detected, instead of tracking it in each driver's private state. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20170220133352.17995-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-29coresight: reset "enable_sink" flag when need beMathieu Poirier
When using coresight from the perf interface sinks are specified as part of the perf command line. As such the sink needs to be disabled once it has been acknowledged by the coresight framework. Otherwise the sink stays enabled, which may interfere with other sessions. This patch removes the sink selection check from the build path process and make it a function on it's own. The function is then used when operating from sysFS or perf to determine what sink has been selected. If operated from perf the status of the "enable_sink" flag is reset so that concurrent session can use a different sink. When used from sysFS the status of the flag is left untouched since users have full control. The implementation doesn't handle a scenario where a sink has been enabled from sysFS and another sink is selected from the perf command line as both modes of operation are mutually exclusive. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31coresight: remove duplicated enumerationMathieu Poirier
Both ETMv3 and ETMv4 drivers are declaring an 'enum etm_addr_type', creating reduncancy. This patch removes the enumeration from the driver files and adds it to a common header. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31coresight: fix handling of ETM trace register access via sysfsSudeep Holla
The ETM registers are classified into 2 categories: trace and management. The core power domain contains most of the trace unit logic including all(except TRCOSLAR and TRCOSLSR) the trace registers. The debug power domain contains the external debugger interface including all management registers. This patch adds coresight unit specific function coresight_simple_func which can be used for ETM trace registers by providing a ETM specific read function which does smp cross call to ensure the trace core is powered up before the register is accessed. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31coresight: add PM runtime calls to coresight_simple_func()Mathieu Poirier
It is mandatory to enable a coresight block's power domain before trying to access management registers. Otherwise the transaction simply stalls, leading to a system hang. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03coresight: moving struct cs_buffers to header fileMathieu Poirier
That way we can re-use the structure in other drivers. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01coresight: moving coresight_simple_func() to header fileMathieu Poirier
Macro "coresight_simple_func()" can be used by several drivers. As such making the structure type generic and moving to a globally available header file. That way individual drivers can use the functionality by simply specifying the structure they need to work with. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20coresight: etb10: adding operation mode for sink->enable()Mathieu Poirier
Adding an operation mode to the sink->enable() API in order to prevent simultaneous access from different callers. TPIU and TMC won't be supplemented with the AUX area API immediately and as such ignore the new mode. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20coresight: etm3x: implementing user/kernel mode tracingMathieu Poirier
Adding new mode to limit tracing to kernel or user space. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20coresight: etm3x: adding operation mode for etm_enable()Mathieu Poirier
Adding a new mode to source API enable() in order to distinguish where the request comes from. That way it is possible to perform different operations based on where the request was issued from. The ETM4x driver is also modified to keep in sync with the new interface. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20coresight: add API to get sink from pathMathieu Poirier
Add an API allowing external code to quickly get a handle on the sink within a path. The sink is always last, but adding an API allows to keep the path's node structure private and remove redundant checks. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20coresight: associating path with session rather than tracerMathieu Poirier
When using the Coresight framework from the sysFS interface a tracer is always handling a single session and as such, a path can be associated with a tracer. But when supporting multiple session per tracer there is no guarantee that sessions will always have the same path from source to sink. This patch is removing the automatic association between path and tracers. The building of a path and enablement of the components in the path are decoupled, allowing for the association of a path with a session rather than a tracer. To keep backward functionality with the current sysFS access methods a per-cpu place holder is used to keep a handle on the path built when tracers are enabled. Lastly APIs to build paths and enable tracers are made public so that other subsystem can interact with the Coresight framework. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-03coresight: moving to new "hwtracing" directoryMathieu Poirier
Keeping drivers related to HW tracing on ARM, i.e coresight, under "drivers/coresight" doesn't make sense when other architectures start rolling out technologies of the same nature. As such creating a new "drivers/hwtracing" directory where all drivers of the same kind can reside, reducing namespace pollution under "drivers/". Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>