| Age | Commit message (Collapse) | Author |
|---|
|
commit 8c7f0a44b4b4ef16df8f44fbaee6d1f5d1593c83 upstream.
Should prevent flicker if PP_OVERDRIVE_MASK is set.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=102646
bug: https://bugs.freedesktop.org/show_bug.cgi?id=108941
bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1088
bug: https://gitlab.freedesktop.org/drm/amd/-/issues/628
Signed-off-by: Sergei Lopatin <magist3r@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DDI IO power well must not be enabled for a TypeC port in TBT mode,
ensure this during driver loading/system resume.
This gets rid of error messages like
[drm] *ERROR* power well DDI E TC2 IO state mismatch (refcount 1/enabled 0)
and avoids leaking the power ref when disabling the output.
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330152244.11316-1-imre.deak@intel.com
(cherry picked from commit f77a2db27f26c3ccba0681f7e89fef083718f07f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 487eca11a321ef33bcf4ca5adb3c0c4954db1b58 ]
The system will be hang up during S3 suspend because of SMU is pending
for GC not respose the register CP_HQD_ACTIVE access request.This issue
root cause of accessing the GC register under enter GFX CGGPG and can
be fixed by disable GFX CGPG before perform suspend.
v2: Use disable the GFX CGPG instead of RLC safe mode guard.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8732fe46b20c951493bfc4dba0ad08efdf41de81 ]
The issues caused by:
commit 64e62bdf04ab ("drm/dp_mst: Remove VCPI while disabling topology
mgr")
Prompted me to take a closer look at how we clear the payload state in
general when disabling the topology, and it turns out there's actually
two subtle issues here.
The first is that we're not grabbing &mgr.payload_lock when clearing the
payloads in drm_dp_mst_topology_mgr_set_mst(). Seeing as the canonical
lock order is &mgr.payload_lock -> &mgr.lock (because we always want
&mgr.lock to be the inner-most lock so topology validation always
works), this makes perfect sense. It also means that -technically- there
could be racing between someone calling
drm_dp_mst_topology_mgr_set_mst() to disable the topology, along with a
modeset occurring that's modifying the payload state at the same time.
The second is the more obvious issue that Wayne Lin discovered, that
we're not clearing proposed_payloads when disabling the topology.
I actually can't see any obvious places where the racing caused by the
first issue would break something, and it could be that some of our
higher-level locks already prevent this by happenstance, but better safe
then sorry. So, let's make it so that drm_dp_mst_topology_mgr_set_mst()
first grabs &mgr.payload_lock followed by &mgr.lock so that we never
race when modifying the payload state. Then, we also clear
proposed_payloads to fix the original issue of enabling a new topology
with a dirty payload state. This doesn't clear any of the drm_dp_vcpi
structures, but those are getting destroyed along with the ports anyway.
Changes since v1:
* Use sizeof(mgr->payloads[0])/sizeof(mgr->proposed_vcpis[0]) instead -
vsyrjala
Cc: Sean Paul <sean@poorly.run>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122194321.14953-1-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a86675968e2300fb567994459da3dbc4cd1b322a ]
This reverts commit 64e62bdf04ab8529f45ed0a85122c703035dec3a.
This commit ends up causing some lockdep splats due to trying to grab the
payload lock while holding the mgr's lock:
[ 54.010099]
[ 54.011765] ======================================================
[ 54.018670] WARNING: possible circular locking dependency detected
[ 54.025577] 5.5.0-rc6-02274-g77381c23ee63 #47 Not tainted
[ 54.031610] ------------------------------------------------------
[ 54.038516] kworker/1:6/1040 is trying to acquire lock:
[ 54.044354] ffff888272af3228 (&mgr->payload_lock){+.+.}, at:
drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[ 54.054957]
[ 54.054957] but task is already holding lock:
[ 54.061473] ffff888272af3060 (&mgr->lock){+.+.}, at:
drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4
[ 54.071193]
[ 54.071193] which lock already depends on the new lock.
[ 54.071193]
[ 54.080334]
[ 54.080334] the existing dependency chain (in reverse order) is:
[ 54.088697]
[ 54.088697] -> #1 (&mgr->lock){+.+.}:
[ 54.094440] __mutex_lock+0xc3/0x498
[ 54.099015] drm_dp_mst_topology_get_port_validated+0x25/0x80
[ 54.106018] drm_dp_update_payload_part1+0xa2/0x2e2
[ 54.112051] intel_mst_pre_enable_dp+0x144/0x18f
[ 54.117791] intel_encoders_pre_enable+0x63/0x70
[ 54.123532] hsw_crtc_enable+0xa1/0x722
[ 54.128396] intel_update_crtc+0x50/0x194
[ 54.133455] skl_commit_modeset_enables+0x40c/0x540
[ 54.139485] intel_atomic_commit_tail+0x5f7/0x130d
[ 54.145418] intel_atomic_commit+0x2c8/0x2d8
[ 54.150770] drm_atomic_helper_set_config+0x5a/0x70
[ 54.156801] drm_mode_setcrtc+0x2ab/0x833
[ 54.161862] drm_ioctl+0x2e5/0x424
[ 54.166242] vfs_ioctl+0x21/0x2f
[ 54.170426] do_vfs_ioctl+0x5fb/0x61e
[ 54.175096] ksys_ioctl+0x55/0x75
[ 54.179377] __x64_sys_ioctl+0x1a/0x1e
[ 54.184146] do_syscall_64+0x5c/0x6d
[ 54.188721] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 54.194946]
[ 54.194946] -> #0 (&mgr->payload_lock){+.+.}:
[ 54.201463]
[ 54.201463] other info that might help us debug this:
[ 54.201463]
[ 54.210410] Possible unsafe locking scenario:
[ 54.210410]
[ 54.217025] CPU0 CPU1
[ 54.222082] ---- ----
[ 54.227138] lock(&mgr->lock);
[ 54.230643] lock(&mgr->payload_lock);
[ 54.237742] lock(&mgr->lock);
[ 54.244062] lock(&mgr->payload_lock);
[ 54.248346]
[ 54.248346] *** DEADLOCK ***
[ 54.248346]
[ 54.254959] 7 locks held by kworker/1:6/1040:
[ 54.259822] #0: ffff888275c4f528 ((wq_completion)events){+.+.},
at: worker_thread+0x455/0x6e2
[ 54.269451] #1: ffffc9000119beb0
((work_completion)(&(&dev_priv->hotplug.hotplug_work)->work)){+.+.},
at: worker_thread+0x455/0x6e2
[ 54.282768] #2: ffff888272a403f0 (&dev->mode_config.mutex){+.+.},
at: i915_hotplug_work_func+0x4b/0x2be
[ 54.293368] #3: ffffffff824fc6c0 (drm_connector_list_iter){.+.+},
at: i915_hotplug_work_func+0x17e/0x2be
[ 54.304061] #4: ffffc9000119bc58 (crtc_ww_class_acquire){+.+.},
at: drm_helper_probe_detect_ctx+0x40/0xfd
[ 54.314855] #5: ffff888272a40470 (crtc_ww_class_mutex){+.+.}, at:
drm_modeset_lock+0x74/0xe2
[ 54.324385] #6: ffff888272af3060 (&mgr->lock){+.+.}, at:
drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4
[ 54.334597]
[ 54.334597] stack backtrace:
[ 54.339464] CPU: 1 PID: 1040 Comm: kworker/1:6 Not tainted
5.5.0-rc6-02274-g77381c23ee63 #47
[ 54.348893] Hardware name: Google Fizz/Fizz, BIOS
Google_Fizz.10139.39.0 01/04/2018
[ 54.357451] Workqueue: events i915_hotplug_work_func
[ 54.362995] Call Trace:
[ 54.365724] dump_stack+0x71/0x9c
[ 54.369427] check_noncircular+0x91/0xbc
[ 54.373809] ? __lock_acquire+0xc9e/0xf66
[ 54.378286] ? __lock_acquire+0xc9e/0xf66
[ 54.382763] ? lock_acquire+0x175/0x1ac
[ 54.387048] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[ 54.393177] ? __mutex_lock+0xc3/0x498
[ 54.397362] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[ 54.403492] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[ 54.409620] ? drm_dp_dpcd_access+0xd9/0x101
[ 54.414390] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[ 54.420517] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[ 54.426645] ? intel_digital_port_connected+0x34d/0x35c
[ 54.432482] ? intel_dp_detect+0x227/0x44e
[ 54.437056] ? ww_mutex_lock+0x49/0x9a
[ 54.441242] ? drm_helper_probe_detect_ctx+0x75/0xfd
[ 54.446789] ? intel_encoder_hotplug+0x4b/0x97
[ 54.451752] ? intel_ddi_hotplug+0x61/0x2e0
[ 54.456423] ? mark_held_locks+0x53/0x68
[ 54.460803] ? _raw_spin_unlock_irqrestore+0x3a/0x51
[ 54.466347] ? lockdep_hardirqs_on+0x187/0x1a4
[ 54.471310] ? drm_connector_list_iter_next+0x89/0x9a
[ 54.476953] ? i915_hotplug_work_func+0x206/0x2be
[ 54.482208] ? worker_thread+0x4d5/0x6e2
[ 54.486587] ? worker_thread+0x455/0x6e2
[ 54.490966] ? queue_work_on+0x64/0x64
[ 54.495151] ? kthread+0x1e9/0x1f1
[ 54.498946] ? queue_work_on+0x64/0x64
[ 54.503130] ? kthread_unpark+0x5e/0x5e
[ 54.507413] ? ret_from_fork+0x3a/0x50
The proper fix for this is probably cleanup the VCPI allocations when we're
enabling the topology, or on the first payload allocation. For now though,
let's just revert.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 64e62bdf04ab ("drm/dp_mst: Remove VCPI while disabling topology mgr")
Cc: Sean Paul <sean@poorly.run>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117205149.97262-1-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2960758cce2310774de60bbbd8d6841d436c54d9 upstream.
Make the fw_write_wait default case true since presumably all new
gfx9 asics will have updated firmware. That is using unique WAIT_REG_MEM
packet with opration=1.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Yuxian Dai <Yuxian.Dai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 022ac4c9c55be35a2d1f71019a931324c51b0dab upstream.
1.Using the FCLK DPM table to set the MCLK for DPM states consist of
three entities:
FCLK
UCLK
MEMCLK
All these three clk change together, MEMCLK from FCLK, so use the fclk
frequency.
2.we should show the current working clock freqency from clock table metric
Signed-off-by: Yuxian Dai <Yuxian.Dai@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ea36ec8623f56791c6ff6738d0509b7920f85220 upstream.
drm_pci_alloc/drm_pci_free are very thin wrappers around the core dma
facilities, and we have no special reason within the drm layer to behave
differently. In particular, since
commit de09d31dd38a50fdce106c15abd68432eebbd014
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Date: Fri Jan 15 16:51:42 2016 -0800
page-flags: define PG_reserved behavior on compound pages
As far as I can see there's no users of PG_reserved on compound pages.
Let's use PF_NO_COMPOUND here.
it has been illegal to combine GFP_COMP with SetPageReserved, so lets
stop doing both and leave the dma layer to its own devices.
Reported-by: Taketo Kabe
Bug: https://gitlab.freedesktop.org/drm/intel/issues/1027
Fixes: de09d31dd38a ("page-flags: define PG_reserved behavior on compound pages")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.5+
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202171635.4039044-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ed1dd899baa32d47d9a93d98336472da50564346 upstream.
Report the correct perfmon domains and signals depending
on the supported feature flags.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 9e2c2e273012 ("drm/etnaviv: add infrastructure to query perf counter")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1aaea8476d9f014667d2cb24819f9bcaf3ebb7a4 upstream.
__i915_gem_object_flush_map() takes a byte range, so feed it the written
bytes and do not mistake the u32 index as bytes!
Fixes: a679f58d0510 ("drm/i915: Flush pages on acquisition")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406114821.10949-1-chris@chris-wilson.co.uk
(cherry picked from commit 30c88a47f1abd5744908d3681f54dcf823fe2a12)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 77bb2f204f1f0a53a602a8fd15816d6826212077 ]
There is one one corner case at dma_fence_signal_locked
which will raise the NULL pointer problem just like below.
->dma_fence_signal
->dma_fence_signal_locked
->test_and_set_bit
here trigger dma_fence_release happen due to the zero of fence refcount.
->dma_fence_put
->dma_fence_release
->drm_sched_fence_release_scheduled
->call_rcu
here make the union fled “cb_list” at finished fence
to NULL because struct rcu_head contains two pointer
which is same as struct list_head cb_list
Therefore, to hold the reference of finished fence at drm_sched_process_job
to prevent the null pointer during finished fence dma_fence_signal
[ 732.912867] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 732.914815] #PF: supervisor write access in kernel mode
[ 732.915731] #PF: error_code(0x0002) - not-present page
[ 732.916621] PGD 0 P4D 0
[ 732.917072] Oops: 0002 [#1] SMP PTI
[ 732.917682] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G OE 5.4.0-rc7 #1
[ 732.918980] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
[ 732.920906] RIP: 0010:dma_fence_signal_locked+0x3e/0x100
[ 732.938569] Call Trace:
[ 732.939003] <IRQ>
[ 732.939364] dma_fence_signal+0x29/0x50
[ 732.940036] drm_sched_fence_finished+0x12/0x20 [gpu_sched]
[ 732.940996] drm_sched_process_job+0x34/0xa0 [gpu_sched]
[ 732.941910] dma_fence_signal_locked+0x85/0x100
[ 732.942692] dma_fence_signal+0x29/0x50
[ 732.943457] amdgpu_fence_process+0x99/0x120 [amdgpu]
[ 732.944393] sdma_v4_0_process_trap_irq+0x81/0xa0 [amdgpu]
v2: hold the finished fence at drm_sched_process_job instead of
amdgpu_fence_process
v3: resume the blank line
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
|
|
|
|
The following deadlock exists in i915_active_wait() due to a double lock
on ref->mutex (call chain listed in order from top to bottom):
i915_active_wait();
mutex_lock_interruptible(&ref->mutex); <-- ref->mutex first acquired
i915_active_request_retire();
node_retire();
active_retire();
mutex_lock_nested(&ref->mutex, SINGLE_DEPTH_NESTING); <-- DEADLOCK
Fix the deadlock by skipping the second ref->mutex lock when
active_retire() is called through i915_active_request_retire().
Note that this bug only affects 5.4 and has since been fixed in 5.5.
Normally, a backport of the fix from 5.5 would be in order, but the
patch set that fixes this deadlock involves massive changes that are
neither feasible nor desirable for backporting [1][2][3]. Therefore,
this small patch was made to address the deadlock specifically for 5.4.
[1] 274cbf20fd10 ("drm/i915: Push the i915_active.retire into a worker")
[2] 093b92287363 ("drm/i915: Split i915_active.mutex into an irq-safe spinlock for the rbtree")
[3] 750bde2fd4ff ("drm/i915: Serialise with remote retirement")
Fixes: 12c255b5dad1 ("drm/i915: Provide an i915_active.acquire callback")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit acfc62dc68770aa665cc606891f6df7d6d1e52c0 ]
fix typo for vcn1 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8c34cd1a7f089dc03933289c5d4a4d1489549828 ]
Shutdown of firmware framebuffer has a bunch of problems. Because
of this the framebuffer region might still be reserved even after
drm_fb_helper_remove_conflicting_pci_framebuffers() returned.
Don't consider pci_request_region() failure for the framebuffer
region as fatal error to workaround this issue.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200313084152.2734-1-kraxel@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dec9de2ada523b344eb2428abfedf9d6cd0a0029 ]
This fixes a problem found on the MacBookPro 2017 Retina panel:
The panel reports 10 bpc color depth in its EDID, and the
firmware chooses link settings at boot which support enough
bandwidth for 10 bpc (324000 kbit/sec aka LINK_RATE_RBR2
aka 0xc), but the DP_MAX_LINK_RATE dpcd register only reports
2.7 Gbps (multiplier value 0xa) as possible, in direct
contradiction of what the firmware successfully set up.
This restricts the panel to 8 bpc, not providing the full
color depth of the panel on Linux <= 5.5. Additionally, commit
'4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")'
introduced into Linux 5.6-rc1 will unclamp panel depth to
its full 10 bpc, thereby requiring a eDP bandwidth for all
modes that exceeds the bandwidth available and causes all modes
to fail validation -> No modes for the laptop panel -> failure
to set any mode -> Panel goes dark.
This patch adds a quirk specific to the MBP 2017 15" Retina
panel to override reported max link rate to the correct maximum
of 0xc = LINK_RATE_RBR2 to fix the darkness and reduced display
precision.
Please apply for Linux 5.6+ to avoid regressing Apple MBP panel
support.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 07dc3678bacc2a75b1900febea7d996a31f178a2 ]
Store the IOMMU mapping created by the device core of each Exynos DRM
sub-device and restore it when the Exynos DRM driver is unbound. This
fixes IOMMU initialization failure for the second time when a deferred
probe is triggered from the bind() callback of master's compound DRM
driver. This also fixes the following issue found using kmemleak
detector:
unreferenced object 0xc2137640 (size 64):
comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s)
hex dump (first 32 bytes):
50 a3 14 c2 80 a2 14 c2 01 00 00 00 20 00 00 00 P........... ...
00 10 00 00 00 80 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<3acd268d>] arch_setup_dma_ops+0x4c/0x104
[<9f7d2cce>] of_dma_configure+0x19c/0x3a4
[<ba07704b>] really_probe+0xb0/0x47c
[<4f510e4f>] driver_probe_device+0x78/0x1c4
[<7481a0cf>] device_driver_attach+0x58/0x60
[<0ff8f5c1>] __driver_attach+0xb8/0x158
[<86006144>] bus_for_each_dev+0x74/0xb4
[<10159dca>] bus_add_driver+0x1c0/0x200
[<8a265265>] driver_register+0x74/0x108
[<e0f3451a>] exynos_drm_init+0xb0/0x134
[<db3fc7ba>] do_one_initcall+0x90/0x458
[<6da35917>] kernel_init_freeable+0x188/0x200
[<db3f74d4>] kernel_init+0x8/0x110
[<1f3cddf9>] ret_from_fork+0x14/0x20
[<8cd12507>] 0x0
unreferenced object 0xc214a280 (size 128):
comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s)
hex dump (first 32 bytes):
00 a0 ec ed 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<3acd268d>] arch_setup_dma_ops+0x4c/0x104
[<9f7d2cce>] of_dma_configure+0x19c/0x3a4
[<ba07704b>] really_probe+0xb0/0x47c
[<4f510e4f>] driver_probe_device+0x78/0x1c4
[<7481a0cf>] device_driver_attach+0x58/0x60
[<0ff8f5c1>] __driver_attach+0xb8/0x158
[<86006144>] bus_for_each_dev+0x74/0xb4
[<10159dca>] bus_add_driver+0x1c0/0x200
[<8a265265>] driver_register+0x74/0x108
[<e0f3451a>] exynos_drm_init+0xb0/0x134
[<db3fc7ba>] do_one_initcall+0x90/0x458
[<6da35917>] kernel_init_freeable+0x188/0x200
[<db3f74d4>] kernel_init+0x8/0x110
[<1f3cddf9>] ret_from_fork+0x14/0x20
[<8cd12507>] 0x0
unreferenced object 0xedeca000 (size 4096):
comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<3acd268d>] arch_setup_dma_ops+0x4c/0x104
[<9f7d2cce>] of_dma_configure+0x19c/0x3a4
[<ba07704b>] really_probe+0xb0/0x47c
[<4f510e4f>] driver_probe_device+0x78/0x1c4
[<7481a0cf>] device_driver_attach+0x58/0x60
[<0ff8f5c1>] __driver_attach+0xb8/0x158
[<86006144>] bus_for_each_dev+0x74/0xb4
[<10159dca>] bus_add_driver+0x1c0/0x200
[<8a265265>] driver_register+0x74/0x108
[<e0f3451a>] exynos_drm_init+0xb0/0x134
[<db3fc7ba>] do_one_initcall+0x90/0x458
[<6da35917>] kernel_init_freeable+0x188/0x200
[<db3f74d4>] kernel_init+0x8/0x110
[<1f3cddf9>] ret_from_fork+0x14/0x20
[<8cd12507>] 0x0
unreferenced object 0xc214a300 (size 128):
comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s)
hex dump (first 32 bytes):
00 a3 14 c2 00 a3 14 c2 00 40 18 c2 00 80 18 c2 .........@......
02 00 02 00 ad 4e ad de ff ff ff ff ff ff ff ff .....N..........
backtrace:
[<08cbd8bc>] iommu_domain_alloc+0x24/0x50
[<b835abee>] arm_iommu_create_mapping+0xe4/0x134
[<3acd268d>] arch_setup_dma_ops+0x4c/0x104
[<9f7d2cce>] of_dma_configure+0x19c/0x3a4
[<ba07704b>] really_probe+0xb0/0x47c
[<4f510e4f>] driver_probe_device+0x78/0x1c4
[<7481a0cf>] device_driver_attach+0x58/0x60
[<0ff8f5c1>] __driver_attach+0xb8/0x158
[<86006144>] bus_for_each_dev+0x74/0xb4
[<10159dca>] bus_add_driver+0x1c0/0x200
[<8a265265>] driver_register+0x74/0x108
[<e0f3451a>] exynos_drm_init+0xb0/0x134
[<db3fc7ba>] do_one_initcall+0x90/0x458
[<6da35917>] kernel_init_freeable+0x188/0x200
[<db3f74d4>] kernel_init+0x8/0x110
[<1f3cddf9>] ret_from_fork+0x14/0x20
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f1c2cd3f8fb959123a9beba18c0e8112dcb2e137 ]
The ROMC_INDEX/DATA offset was changed to e4/e5 since
from smuio_v11 (vega20/arcturus).
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Tested-by: Candice Li <Candice.Li@amd.com>
Reviewed-by: Candice Li <Candice.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d5349775c1726ce997b8eb4982cd85a01f1c8b42 ]
[why]
nv14 previously inherited soc bb from generic dcn 2, did not match
watermark values according to memory team
[how]
add nv14 specific soc bb: copy nv2 generic that it was
using from before, but changed num channels to 8
Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
commit e8dca30f7118461d47e1c3510d0e31b277439151 upstream.
CTA-861-F explicitly states that for RGB colorspace colorimetry should
be set to "none". Fix that.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304232512.51616-2-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b216a8e7908cd750550c0480cf7d2b3a37f06954 upstream.
drm_lease_create takes ownership of leases. And leases will be released
by drm_master_put.
drm_master_put
->drm_master_destroy
->idr_destroy
So we needn't call idr_destroy again.
Reported-and-tested-by: syzbot+05835159fe322770fe3d@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1584518030-4173-1-git-send-email-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5bbc6604a62814511c32f2e39bc9ffb2c1b92cbe upstream.
The offset into the array was specified in bytes but should
be in terms of 32-bit words. Also prevent large reads that
would also cause a buffer overread.
v2: Read from correct offset from internal storage buffer.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f053c83ad5c88427644e06746bfddcefa409c27d ]
This reverts commit f25c7a006cd1 ("drm/fbdev: Fallback to non tiled mode
if all tiles not present"). The commit causes flip done timeouts in CI.
Below are the sample errors thrown in logs:
[IGT] core_getversion: executing
[IGT] core_getversion: exiting, ret=0
Setting dangerous option reset - tainting kernel
drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out
drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out
drm:drm_atomic_helper_wait_for_dependencies] ERROR [PLANE:92:plane 1B] flip_done timed out
[drm:drm_atomic_helper_wait_for_flip_done] ERROR [CRTC:152:pipe B] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] ERROR [PLANE:92:plane 1B] flip_done timed out
[drm:drm_atomic_helper_wait_for_flip_done] ERROR [CRTC:152:pipe B] flip_done timed out
Console: switching to colour frame buffer device 480x135
[drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out
Reverting the change for now to unblock CI execution.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Fixes: f25c7a006cd1 ("drm/fbdev: Fallback to non tiled mode if all tiles not present")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/6
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191123091840.32382-1-uma.shankar@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a0275dfc82c9034eefbeffd556cca6dd239d7925 ]
[Why]
Swath sizes are being calculated incorrectly. The horizontal swath size
should be the product of block height, viewport width, and bytes per
element, but the calculation uses viewport height instead of width. The
vertical swath size is similarly incorrectly calculated. The effect of
this is that we report the wrong DCC caps.
[How]
Use viewport width in the horizontal swath size calculation and viewport
height in the vertical swath size calculation.
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5ac7fd2f597b88ee81f4748ee50cab06192a8dc3 ]
[Why]
If we have a single MST display and we disconnect it, we dont disable that
link. This causes the old link settings to still exist
Now on a replug for MST we think its a link loss and will try to reallocate
mst payload which will fail, throwing warning below.
[ 129.374192] [drm] Failed to updateMST allocation table forpipe idx:0
[ 129.374206] ------------[ cut here ]------------
[ 129.374284] WARNING: CPU: 14 PID: 1710 at
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc_link.c:3153
dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu]
[ 129.374285] Modules linked in: amdgpu(OE) amd_iommu_v2 gpu_sched ttm
drm_kms_helper drm fb_sys_fops syscopyarea sysfillrect sysimgblt
binfmt_misc nls_iso8859_1 edac_mce_amd snd_hda_codec_realtek
snd_hda_codec_generic ledtrig_audio kvm snd_hda_codec_hdmi snd_hda_intel
snd_intel_nhlt snd_hda_codec irqbypass snd_hda_core snd_hwdep snd_pcm
snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul snd_seq
crc32_pclmul ghash_clmulni_intel snd_seq_device snd_timer snd aesni_intel
eeepc_wmi crypto_simd asus_wmi joydev cryptd sparse_keymap input_leds
soundcore video glue_helper wmi_bmof mxm_wmi k10temp ccp mac_hid
sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4
hid_generic usbhid hid igb i2c_algo_bit ahci dca i2c_piix4 libahci
gpio_amdpt wmi gpio_generic
[ 129.374318] CPU: 14 PID: 1710 Comm: kworker/14:2 Tainted: G W OE 5.4.0-rc7bhawan+ #480
[ 129.374318] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 0515 03/30/2017
[ 129.374397] Workqueue: events dm_irq_work_func [amdgpu]
[ 129.374468] RIP: 0010:dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu]
[ 129.374470] Code: 52 20 e8 1c 63 ad f4 48 8b 5d d0 65 48 33 1c 25 28 00
00 00 b8 01 00 00 00 75 16 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3
<0f> 0b e9 fa fe ff ff e8 ed 5b d6 f3 41 0f b6 b6 c4 02 00 00 48 c7
[ 129.374471] RSP: 0018:ffff9f9141e7fcc0 EFLAGS: 00010246
[ 129.374472] RAX: 0000000000000000 RBX: ffff91ef0762f800 RCX: 0000000000000000
[ 129.374473] RDX: 0000000000000005 RSI: ffffffffc0c4a988 RDI: 0000000000000004
[ 129.374474] RBP: ffff9f9141e7fd10 R08: 0000000000000005 R09: 0000000000000000
[ 129.374475] R10: 0000000000000002 R11: 0000000000000001 R12: ffff91eebd510c00
[ 129.374475] R13: ffff91eebd510e58 R14: ffff91ef052c01b8 R15: 0000000000000006
[ 129.374476] FS: 0000000000000000(0000) GS:ffff91ef0ef80000(0000) knlGS:0000000000000000
[ 129.374477] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 129.374478] CR2: 000055623ea01d50 CR3: 0000000408a8c000 CR4: 00000000003406e0
[ 129.374479] Call Trace:
[ 129.374550] dc_link_reallocate_mst_payload+0x12e/0x150 [amdgpu]
[ 129.374617] dc_link_handle_hpd_rx_irq+0x6d4/0x6e0 [amdgpu]
[ 129.374693] handle_hpd_rx_irq+0x77/0x310 [amdgpu]
[ 129.374768] dm_irq_work_func+0x53/0x70 [amdgpu]
[ 129.374774] process_one_work+0x1fd/0x3f0
[ 129.374776] worker_thread+0x255/0x410
[ 129.374778] kthread+0x121/0x140
[ 129.374780] ? process_one_work+0x3f0/0x3f0
[ 129.374781] ? kthread_park+0x90/0x90
[ 129.374785] ret_from_fork+0x22/0x40
[How]
when we disable MST we should clear the cur link settings (lane_count=0 is
good enough). This will cause us to not reallocate payloads earlier than
expected and not throw the warning
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2ab7e274b86739f4ceed5d94b6879f2d07b2802f ]
The TDR will be randomly failed due to compute ring
test failure. If the compute ring wptr & 0x7ff(ring_buf_mask)
is 0x100 then after map mqd the compute ring rptr will be
synced with 0x100. And the ring test packet size is also 0x100.
Then after invocation of amdgpu_ring_commit, the cp will not
really handle the packet on the ring buffer because rptr is equal to wptr.
Signed-off-by: Yintian Tao <yttao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3b6a9b19ab652efac7ad4c392add6f1235019568 ]
Move enabling and disabling HDMI_EN optional regulator to probe() function
to keep track on the regulator status. This fixes following warning if
probe() fails (for example when I2C DDC adapter cannot be yet gathered
due to the missing driver). This fixes following warning observed on
Arndale5250 board with multi_v7_defconfig:
[drm] Failed to get ddc i2c adapter by node
------------[ cut here ]------------
WARNING: CPU: 0 PID: 214 at drivers/regulator/core.c:2051 _regulator_put+0x16c/0x184
Modules linked in: ...
CPU: 0 PID: 214 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219-00040-g38af1dfafdbb #7570
Hardware name: Samsung Exynos (Flattened Device Tree)
[<c0312258>] (unwind_backtrace) from [<c030cc10>] (show_stack+0x10/0x14)
[<c030cc10>] (show_stack) from [<c0f0d3a0>] (dump_stack+0xcc/0xe0)
[<c0f0d3a0>] (dump_stack) from [<c0346a58>] (__warn+0xe0/0xf8)
[<c0346a58>] (__warn) from [<c0346b20>] (warn_slowpath_fmt+0xb0/0xb8)
[<c0346b20>] (warn_slowpath_fmt) from [<c0893f58>] (_regulator_put+0x16c/0x184)
[<c0893f58>] (_regulator_put) from [<c0893f8c>] (regulator_put+0x1c/0x2c)
[<c0893f8c>] (regulator_put) from [<c09b2664>] (release_nodes+0x17c/0x200)
[<c09b2664>] (release_nodes) from [<c09aebe8>] (really_probe+0x10c/0x350)
[<c09aebe8>] (really_probe) from [<c09aefa8>] (driver_probe_device+0x60/0x1a0)
[<c09aefa8>] (driver_probe_device) from [<c09af288>] (device_driver_attach+0x58/0x60)
[<c09af288>] (device_driver_attach) from [<c09af310>] (__driver_attach+0x80/0xbc)
[<c09af310>] (__driver_attach) from [<c09ace34>] (bus_for_each_dev+0x68/0xb4)
[<c09ace34>] (bus_for_each_dev) from [<c09ae00c>] (bus_add_driver+0x130/0x1e8)
[<c09ae00c>] (bus_add_driver) from [<c09afd98>] (driver_register+0x78/0x110)
[<c09afd98>] (driver_register) from [<bf139558>] (exynos_drm_init+0xe8/0x11c [exynosdrm])
[<bf139558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220)
[<c0302fa8>] (do_one_initcall) from [<c03dc02c>] (do_init_module+0x60/0x210)
[<c03dc02c>] (do_init_module) from [<c03daf44>] (load_module+0x1c0c/0x2310)
[<c03daf44>] (load_module) from [<c03db85c>] (sys_finit_module+0xac/0xbc)
[<c03db85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
Exception stack(0xecca3fa8 to 0xecca3ff0)
...
---[ end trace 276c91214635905c ]---
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c0fd99d659ba5582e09625c7a985d63fc2ca74b5 ]
Writing to the built-in strings arrays doesn't work if driver is loaded
as kernel module. This is also considered as a bad pattern. Fix this by
adding a call to clk_get() with legacy clock name. This fixes following
kernel oops if driver is loaded as module:
Unable to handle kernel paging request at virtual address bf047978
pgd = (ptrval)
[bf047978] *pgd=59344811, *pte=5903c6df, *ppte=5903c65f
Internal error: Oops: 80f [#1] SMP ARM
Modules linked in: mc exynosdrm(+) analogix_dp rtc_s3c exynos_ppmu i2c_gpio
CPU: 1 PID: 212 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219 #326
videodev: Linux video capture interface: v2.00
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at exynos_dsi_probe+0x1f0/0x384 [exynosdrm]
LR is at exynos_dsi_probe+0x1dc/0x384 [exynosdrm]
...
Process systemd-udevd (pid: 212, stack limit = 0x(ptrval))
...
[<bf03cf14>] (exynos_dsi_probe [exynosdrm]) from [<c09b1ca0>] (platform_drv_probe+0x6c/0xa4)
[<c09b1ca0>] (platform_drv_probe) from [<c09afcb8>] (really_probe+0x210/0x350)
[<c09afcb8>] (really_probe) from [<c09aff74>] (driver_probe_device+0x60/0x1a0)
[<c09aff74>] (driver_probe_device) from [<c09b0254>] (device_driver_attach+0x58/0x60)
[<c09b0254>] (device_driver_attach) from [<c09b02dc>] (__driver_attach+0x80/0xbc)
[<c09b02dc>] (__driver_attach) from [<c09ade00>] (bus_for_each_dev+0x68/0xb4)
[<c09ade00>] (bus_for_each_dev) from [<c09aefd8>] (bus_add_driver+0x130/0x1e8)
[<c09aefd8>] (bus_add_driver) from [<c09b0d64>] (driver_register+0x78/0x110)
[<c09b0d64>] (driver_register) from [<bf038558>] (exynos_drm_init+0xe8/0x11c [exynosdrm])
[<bf038558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220)
[<c0302fa8>] (do_one_initcall) from [<c03dd02c>] (do_init_module+0x60/0x210)
[<c03dd02c>] (do_init_module) from [<c03dbf44>] (load_module+0x1c0c/0x2310)
[<c03dbf44>] (load_module) from [<c03dc85c>] (sys_finit_module+0xac/0xbc)
[<c03dc85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
Exception stack(0xd979bfa8 to 0xd979bff0)
...
---[ end trace db16efe05faab470 ]---
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a9d1e3f3f038785ebc72d53f1c409d07f6b4ff5 ]
Properly propagate error value from devm_regulator_bulk_get() and don't
confuse user with meaningless warning about failure in getting regulators
in case of deferred probe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 318caac7c81cdf5806df30c3d72385659a5f0f53 ]
The cursor and primary planes were hard coded.
Now search for them for passing to drm_crtc_init_with_planes
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
vmw_fifo_ping_host() disables preemption around a test and a register
write via vmw_write(). The write function acquires a spinlock_t typed
lock which is not allowed in a preempt_disable()ed section on
PREEMPT_RT. This has been reported in the bugzilla.
It has been explained by Thomas Hellstrom that this preempt_disable()ed
section is not required for correctness.
Remove the preempt_disable() section.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206591
Link: https://lkml.kernel.org/r/0b5e1c65d89951de993deab06d1d197b40fd67aa.camel@vmware.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
|
|
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
[ Upstream commit 4829f89855f1d3a3d8014e74cceab51b421503db ]
fix system memory leak
v2:
fix coding style
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 37c58ddf57364d1a636850bb8ba6acbe1e16195e ]
Use a more meaningful variable name for the invalidation request
that is distinct from the tmp variable that gets overwritten when
acquiring the invalidation semaphore.
Fixes: 4ed8a03740d0 ("drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 04d6067f1f19e70a418f92fa3170cf7fe53b7fdf upstream.
From commit f25a49ab8ab9 ("drm/i915/gvt: Use vgpu_lock to protect per
vgpu access") the vgpu idr destroy is moved later than vgpu resource
destroy, then it would fail to stop timer for schedule policy clean
which to check vgpu idr for any left vGPU. So this trys to destroy
vgpu idr earlier.
Cc: Colin Xu <colin.xu@intel.com>
Fixes: f25a49ab8ab9 ("drm/i915/gvt: Use vgpu_lock to protect per vgpu access")
Acked-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200229055445.31481-1-zhenyuw@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 259170cb4c84f4165a36c0b05811eb74c495412c upstream.
Commit c3b5a8430daad ("drm/i915/gvt: Enable gfx virtualiztion for CFL")
added the support on CFL. The vgpu emulation hotplug support on CFL was
supposed to be included in that patch. Without the vgpu emulation
hotplug support, the dma-buf based display gives us a blur face.
So fix this issue by adding the vgpu emulation hotplug support on CFL.
Fixes: c3b5a8430daad ("drm/i915/gvt: Enable gfx virtualiztion for CFL")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200227010041.32248-1-tina.zhang@intel.com
(cherry picked from commit 135dde8853c7e00f6002e710f7e4787ed8585c0e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 14a0d527a479eb2cb6067f9e5e163e1bf35db2a9 upstream.
Since the semaphore fence may be signaled from inside an interrupt
handler from inside a request holding its request->lock, we cannot then
enter into the engine->active.lock for processing the semaphore priority
bump as we may traverse our call tree and end up on another held
request.
CPU 0:
[ 2243.218864] _raw_spin_lock_irqsave+0x9a/0xb0
[ 2243.218867] i915_schedule_bump_priority+0x49/0x80 [i915]
[ 2243.218869] semaphore_notify+0x6d/0x98 [i915]
[ 2243.218871] __i915_sw_fence_complete+0x61/0x420 [i915]
[ 2243.218874] ? kmem_cache_free+0x211/0x290
[ 2243.218876] i915_sw_fence_complete+0x58/0x80 [i915]
[ 2243.218879] dma_i915_sw_fence_wake+0x3e/0x80 [i915]
[ 2243.218881] signal_irq_work+0x571/0x690 [i915]
[ 2243.218883] irq_work_run_list+0xd7/0x120
[ 2243.218885] irq_work_run+0x1d/0x50
[ 2243.218887] smp_irq_work_interrupt+0x21/0x30
[ 2243.218889] irq_work_interrupt+0xf/0x20
CPU 1:
[ 2242.173107] _raw_spin_lock+0x8f/0xa0
[ 2242.173110] __i915_request_submit+0x64/0x4a0 [i915]
[ 2242.173112] __execlists_submission_tasklet+0x8ee/0x2120 [i915]
[ 2242.173114] ? i915_sched_lookup_priolist+0x1e3/0x2b0 [i915]
[ 2242.173117] execlists_submit_request+0x2e8/0x2f0 [i915]
[ 2242.173119] submit_notify+0x8f/0xc0 [i915]
[ 2242.173121] __i915_sw_fence_complete+0x61/0x420 [i915]
[ 2242.173124] ? _raw_spin_unlock_irqrestore+0x39/0x40
[ 2242.173137] i915_sw_fence_complete+0x58/0x80 [i915]
[ 2242.173140] i915_sw_fence_commit+0x16/0x20 [i915]
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1318
Fixes: b7404c7ecb38 ("drm/i915: Bump ready tasks ahead of busywaits")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310101720.9944-1-chris@chris-wilson.co.uk
(cherry picked from commit 209df10bb4536c81c2540df96c02cd079435357f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1d61c5d711a2dc0b978ae905535edee9601f9449 upstream.
The alignment is u64, and yet is_power_of_2() assumes unsigned long,
which might give different results between 32b and 64b kernel.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305203534.210466-1-matthew.auld@intel.com
Cc: stable@vger.kernel.org
(cherry picked from commit 2920516b2f719546f55079bc39a7fe409d9e80ab)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d785476c608c621b345dd9396e8b21e90375cb0e upstream.
Variable grph_obj_type is being assigned twice, one of these is
redundant so remove it.
Addresses-Coverity: ("Evaluation order violation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b0138364da17617db052c4a738b58bf45e42f500 upstream.
Fixes: 3e93bc2a58aa ("drm/virtio: make resource id workaround runtime switchable.")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://patchwork.freedesktop.org/patch/msgid/20190828185516.22b03da8@canb.auug.org.au
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f4aaa44e8b20f7e0d4ea68d3bca4968b6ae5aaff upstream.
The assert_mmap_offset() returns type bool so if we return an error
pointer that is "return true;" or success. If we have an error, then
we should return false.
Fixes: 3d81d589d6e3 ("drm/i915: Test exhaustion of the mmap space")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228141413.qfjf4abr323drlo4@kili.mountain
(cherry picked from commit efbf928824820f2738f41271934f6ec2c6ebd587)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c725161924f9a5872a3e53b73345a6026a5c170e upstream.
It wasn't terribly clear from the bspec's wording, but after discussion
with the hardware folks, it turns out that we need to preserve the
pre-existing contents of the MBUS ABOX control register when
initializing a few specific bits.
Bspec: 49213
Bspec: 50096
Fixes: 4cb4585e5a7f ("drm/i915/icl: initialize MBus during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-1-matthew.d.roper@intel.com
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
(cherry picked from commit 837b63e6087838d0f1e612d448405419199d8033)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228004320.127142-1-matthew.d.roper@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a4769905f0ae32cae4f096f646ab03b8b4794c74 upstream.
YUV444 and YVU444 are planar formats, but HW format RGB888 is packed.
This means that those two mappings were never correct. Remove them.
Fixes: 60a3dcf96aa8 ("drm/sun4i: Add DE2 definitions for YUV formats")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-2-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 20896ef137340e9426cf322606f764452f5eb960 upstream.
DE2 VI layer doesn't support blending which means alpha channel is
ignored. Replace all formats with alpha with "don't care" (X) channel.
Fixes: 7480ba4d7571 ("drm/sun4i: Add support for DE2 VI planes")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-4-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Sergei Lopatin
Imre Deak
Prike Liang
Lyude Paul
Sasha Levin
Aaron Liu
Yuxian Dai
Chris Wilson
Christian Gmeiner
Yintian Tao
Bruce Ashfield
Sultan Alsawaf
James Zhu
Gerd Hoffmann
Mario Kleiner
Marek Szyprowski
Hawking Zhang
Martin Leung
Jernej Skrabec
Qiujun Huang
Tom St Denis
Josip Pavic
Bhawanpreet Lakha
Evan Benn
Sebastian Andrzej Siewior
Monk Liu
Felix Kuehling
Zhenyu Wang
Tina Zhang
Matthew Auld
Colin Ian King
Stephen Rothwell
Dan Carpenter
Matt Roper