| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 40bd4be5a652ce56068a8273b68caa38cb0d8f4b ]
Previously we masked PCIe Link Control 2 register values with "7 << 9",
which was apparently intended to be the Transmit Margin field, but instead
was the high order bit of Transmit Margin, the Enter Modified Compliance
bit, and the Compliance SOS bit.
Correct the mask to "7 << 7", which is the Transmit Margin field.
Link: https://lore.kernel.org/r/20191112173503.176611-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 7189576e8a82 ("drm/radeon: Use RMW accessors for changing LNKCTL")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ce7d88110b9ed5f33fe79ea6d4ed049fb0e57bce ]
Don't assume that only the driver would be accessing LNKCTL. ASPM policy
changes can trigger write to LNKCTL outside of driver's control. And in
the case of upstream bridge, the driver does not even own the device it's
changing the registers for.
Use RMW capability accessors which do proper locking to avoid losing
concurrent updates to the register value.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: a2e73f56fa62 ("drm/amdgpu: Add support for CIK parts")
Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10")
Link: https://lore.kernel.org/r/20230717120503.15276-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 88027c89ea146e32485251f1c2dddcde43c8d04e ]
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability")
added accessors for the PCI Express Capability so that drivers didn't
need to be aware of differences between v1 and v2 of the PCI
Express Capability.
Replace pci_read_config_word() and pci_write_config_word() calls with
pcie_capability_read_word() and pcie_capability_write_word().
[bhelgaas: fix a couple remaining instances in cik.c]
Link: https://lore.kernel.org/r/20191118003513.10852-1-fred@fredlawl.com
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: ce7d88110b9e ("drm/amdgpu: Use RMW accessors for changing LNKCTL")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 35e768e296729ac96a8c33b7810b6cb1673ae961 ]
Replace hard-coded magic numbers with the descriptive PCI_EXP_LNKCTL2
definitions. No functional change intended.
Link: https://lore.kernel.org/r/20191112173503.176611-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: ce7d88110b9e ("drm/amdgpu: Use RMW accessors for changing LNKCTL")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 19d7a95a8ba66b198f759cf610cc935ce9840d5b ]
Previously we masked PCIe Link Control 2 register values with "7 << 9",
which was apparently intended to be the Transmit Margin field, but instead
was the high order bit of Transmit Margin, the Enter Modified Compliance
bit, and the Compliance SOS bit.
Correct the mask to "7 << 7", which is the Transmit Margin field.
Link: https://lore.kernel.org/r/20191112173503.176611-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: ce7d88110b9e ("drm/amdgpu: Use RMW accessors for changing LNKCTL")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 379091e0f6d179d1a084c65de90fa44583b14a70 ]
Also return -ENOMEM if such a failure happens, the implement should take
responsibility for the error handling.
Fixes: 3df64d7b0a4f ("drm/mediatek: Implement gem prime vmap/vunmap function")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230706134000.130098-1-suijingfeng@loongson.cn/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fd0ad3b2365c1c58aa5a761c18efc4817193beb6 ]
Apparently no one noticed that mdp5 plane states leak like a sieve
ever since we introduced plane_state->commit refcount a few years ago
in 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too
early by tracking commits, v3.")
Fix it by using the right helpers.
Fixes: 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reported-and-tested-by: dorum@noisolation.com
Cc: dorum@noisolation.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/551236/
Link: https://lore.kernel.org/r/20230803204521.928582-1-daniel.vetter@ffwll.ch
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7a675a8fa598edb29a664a91adb80f0340649f6f ]
The connector type and pixel format are missing for this panel,
add them to prevent various drivers from failing to determine
either of those parameters.
Fixes: 7ee933a1d5c4 ("drm/panel: simple: Add support for AUO T215HVN01")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709134914.449328-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f0d984053f74983a287100a9519b2fabb785fb5 ]
As ffs() returns one more than the index of the first bit set (zero
means no bits set), the color key mode value is shifted one position too
much.
Fix this by using FIELD_GET() instead.
Fixes: c96103b6c49ff9a8 ("drm/armada: move colorkey properties into overlay plane state")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a4d779d954a7515ddbbf31cb0f0d8184c0e7c879.1689600265.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2a1ca44b654346cadfc538c4fb32eecd8daf3140 ]
When platform_get_irq fails, we should return dpaux->irq
instead of -ENXIO.
Fixes: 6b6b604215c6 ("drm/tegra: Add eDP support")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-13-frank.li@vivo.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d12919bb5da571ec50588ef97683d37e36dc2de5 ]
The platform_get_irq() prints error message telling that interrupt is
missing,hence there is no need to duplicated that message in the
drivers.
Signed-off-by: Tan Zhongjun <tanzhongjun@yulong.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Stable-dep-of: 2a1ca44b6543 ("drm/tegra: dpaux: Fix incorrect return value of platform_get_irq")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a0cc8e1512ad72c9f97cdcb76d42715730adaf62 ]
Fixes the following:
WARNING: min() should probably be min_t(size_t, size, sizeof(ip))
+ ret = copy_to_user(out, &ip, min((size_t)size, sizeof(ip)));
And other style fixes:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Missing a blank line after declarations
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d281eeaa4de2636ff0c8e6ae387bb07b50e5fcbb ]
For ADV7533 and ADV7535 low refresh rate is selected using
bits [3:2] of 0x4a main register.
So depending on ADV model write 0xfb or 0x4a register.
Fixes: 2437e7cd88e8 ("drm/bridge: adv7533: Initial support for ADV7533")
Reviewed-by: Robert Foss <rfoss@kernel.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719060143.63649-1-alex@shruggie.ro
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 20faf2005ec85fa1a6acc9a74ff27de667f90576 ]
gpu->mmu_context is the MMU context of the last job in the HW queue, which
isn't necessarily the same as the context from the bad job. Dump the MMU
context from the scheduler determined bad submit to make it work as intended.
Fixes: 17e4660ae3d7 ("drm/etnaviv: implement per-process address spaces on MMUv2")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 822130b5e8834ab30ad410cf19a582e5014b9a85 ]
On 32-bit architectures comparing a resource against a value larger than
U32_MAX can cause a warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1344:18: error: result of comparison of constant 4294967296 with expression of type 'resource_size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
res->start > 0x100000000ull)
~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
As gcc does not warn about this in dead code, add an IS_ENABLED() check at
the start of the function. This will always return success but not actually resize
the BAR on 32-bit architectures without high memory, which is exactly what
we want here, as the driver can fall back to bank switching the VRAM
access.
Fixes: 31b8adab3247 ("drm/amdgpu: require a root bus window above 4GB for BAR resize")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f947be02aab5b154427cb5b0fffe858fc387b02 ]
The debug print parameters were swapped in the output and they were
printed as decimal values, both the hardware address and the value.
Update the debug print to print the parameters in correct order, and
use hexadecimal print for both address and value.
Fixes: f38b7cca6d0e ("drm/bridge: tc358764: Add DSI to LVDS bridge driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615152817.359420-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5a25cefc0920088bb9afafeb80ad3dcd84fe278b ]
[Why & How]
If there is no TG allocation we can dereference a NULL pointer when
checking if the TG is enabled.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2513ed4f937999c0446fd824f7564f76b697d722 ]
[Why]
When booting, the driver waits for the MPC idle bit to be set as part of
pipe initialization. However, on some systems this occurs before OTG is
enabled, and since the MPC idle bit won't be set until the vupdate
signal occurs (which requires OTG to be enabled), this never happens and
the wait times out. This can add hundreds of milliseconds to the boot
time.
[How]
Do not wait for mpc idle if tg is disabled
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 5a25cefc0920 ("drm/amd/display: check TG is non-null before checking if enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2e54154b9f27262efd0cb4f903cc7d5ad1fe9628 ]
fence Decrements the reference count before exiting.
Avoid Race Vulnerabilities for fence use-after-free.
v2 (chk): actually fix the use after free and not just move it.
Signed-off-by: shanzhulig <shanzhulig@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f828b681d0cd566f86351c0b913e6cb6ed8c7b9c ]
The type of size is unsigned, if size is 0x40000000, there will be an
integer overflow, size will be zero after size *= sizeof(uint32_t),
will cause uninitialized memory to be referenced later
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: hackyzh002 <hackyzh002@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d5712cd22b9cf109fded1b7f178f4c1888c8b84b upstream.
The original commit adding that check tried to protect the kenrel against
a potential invalid NULL pointer access.
However we call nouveau_connector_detect_depth once without a native_mode
set on purpose for non LVDS connectors and this broke DP support in a few
cases.
Cc: Olaf Skibbe <news@kravcenko.com>
Cc: Lyude Paul <lyude@redhat.com>
Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/238
Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/245
Fixes: 20a2ce87fbaf8 ("drm/nouveau/dp: check for NULL nv_connector->native_mode")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230805101813.2603989-1-kherbst@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1cb9e2ef66d53b020842b18762e30d0eb4384de8 upstream.
We have a lurking bug where Fragment Shader Helper Invocations can't load
from memory. But this is actually required in OpenGL and is causing random
hangs or failures in random shaders.
It is unknown how widespread this issue is, but shaders hitting this can
end up with infinite loops.
We enable those only on all Kepler and newer GPUs where we use our own
Firmware.
Nvidia's firmware provides a way to set a kernelspace controlled list of
mmio registers in the gr space from push buffers via MME macros.
v2: drop code for gm200 and newer.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@gmail.com>
Cc: nouveau@lists.freedesktop.org
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230622152017.2512101-1-kherbst@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6e8a996563ecbe68e49c49abd4aaeef69f11f2dc ]
The msm_gem_get_vaddr() returns an ERR_PTR() on failure, and a null
is catastrophic here, so we should use IS_ERR_OR_NULL() to check
the return value.
Fixes: 6a8bd08d0465 ("drm/msm: add sudo flag to submit ioctl")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/547712/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bd846ceee9c478d0397428f02696602ba5eb264a ]
The incorrect size was causing "CP | AHB bus error" when snapshotting
the GPU state on a6xx gen4 (a660 family).
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/26
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Fixes: 1707add81551 ("drm/msm/a6xx: Add a6xx gpu state")
Patchwork: https://patchwork.freedesktop.org/patch/546763/
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8383f5cf1b3573ce140a80bfbfd809278ab16d6 ]
Drop the leftover of bus-client -> interconnect conversion, the enum
dpu_core_perf_data_bus_id.
Fixes: cb88482e2570 ("drm/msm/dpu: clean up references of DPU custom bus scaling")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546048/
Link: https://lore.kernel.org/r/20230707193942.3806526-2-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2329cc7a101af1a844fbf706c0724c0baea38365 upstream.
When a new mode is set to modeset->mode, the previous mode should be freed.
This fixes the following kmemleak report:
drm_mode_duplicate+0x45/0x220 [drm]
drm_client_modeset_probe+0x944/0xf50 [drm]
__drm_fb_helper_initial_config_and_unlock+0xb4/0x2c0 [drm_kms_helper]
drm_fbdev_client_hotplug+0x2bc/0x4d0 [drm_kms_helper]
drm_client_register+0x169/0x240 [drm]
ast_pci_probe+0x142/0x190 [ast]
local_pci_probe+0xdc/0x180
work_for_cpu_fn+0x4e/0xa0
process_one_work+0x8b7/0x1540
worker_thread+0x70a/0xed0
kthread+0x29f/0x340
ret_from_fork+0x1f/0x30
cc: <stable@vger.kernel.org>
Reported-by: Zhang Yi <yizhan@redhat.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711092203.68157-3-jfalempe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c2a88e8bdf5f6239948d75283d0ae7e0c7945b03 upstream.
dmt_mode is allocated and never freed in this function.
It was found with the ast driver, but most drivers using generic fbdev
setup are probably affected.
This fixes the following kmemleak report:
backtrace:
[<00000000b391296d>] drm_mode_duplicate+0x45/0x220 [drm]
[<00000000e45bb5b3>] drm_client_target_cloned.constprop.0+0x27b/0x480 [drm]
[<00000000ed2d3a37>] drm_client_modeset_probe+0x6bd/0xf50 [drm]
[<0000000010e5cc9d>] __drm_fb_helper_initial_config_and_unlock+0xb4/0x2c0 [drm_kms_helper]
[<00000000909f82ca>] drm_fbdev_client_hotplug+0x2bc/0x4d0 [drm_kms_helper]
[<00000000063a69aa>] drm_client_register+0x169/0x240 [drm]
[<00000000a8c61525>] ast_pci_probe+0x142/0x190 [ast]
[<00000000987f19bb>] local_pci_probe+0xdc/0x180
[<000000004fca231b>] work_for_cpu_fn+0x4e/0xa0
[<0000000000b85301>] process_one_work+0x8b7/0x1540
[<000000003375b17c>] worker_thread+0x70a/0xed0
[<00000000b0d43cd9>] kthread+0x29f/0x340
[<000000008d770833>] ret_from_fork+0x1f/0x30
unreferenced object 0xff11000333089a00 (size 128):
cc: <stable@vger.kernel.org>
Fixes: 1d42bbc8f7f9 ("drm/fbdev: fix cloning on fbcon")
Reported-by: Zhang Yi <yizhan@redhat.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711092203.68157-2-jfalempe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4e076c73e4f6e90816b30fcd4a0d7ab365087255 upstream.
This requires a bit of background. Properly done a modeset driver's
unload/remove sequence should be
drm_dev_unplug();
drm_atomic_helper_shutdown();
drm_dev_put();
The trouble is that the drm_dev_unplugged() checks are by design racy,
they do not synchronize against all outstanding ioctl. This is because
those ioctl could block forever (both for modeset and for driver
specific ioctls), leading to deadlocks in hotunplug. Instead the code
sections that touch the hardware need to be annotated with
drm_dev_enter/exit, to avoid accessing hardware resources after the
unload/remove has finished.
To avoid use-after-free issues all the involved userspace visible
objects are supposed to hold a reference on the underlying drm_device,
like drm_file does.
The issue now is that we missed one, the atomic modeset ioctl can be run
in a nonblocking fashion, and in that case it cannot rely on the implied
drm_device reference provided by the ioctl calling context. This can
result in a use-after-free if an nonblocking atomic commit is carefully
raced against a driver unload.
Fix this by unconditionally grabbing a drm_device reference for any
drm_atomic_state structures. Strictly speaking this isn't required for
blocking commits and TEST_ONLY calls, but it's the simpler approach.
Thanks to shanzhulig for the initial idea of grabbing an unconditional
reference, I just added comments, a condensed commit message and fixed a
minor potential issue in where exactly we drop the final reference.
Reported-by: shanzhulig <shanzhulig@gmail.com>
Suggested-by: shanzhulig <shanzhulig@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2bdba9d4a3baa758c2ca7f5b37b35c7b3391dc42 upstream.
If we disable vblank when entering self-refresh, vblank APIs (like
DRM_IOCTL_WAIT_VBLANK) no longer work. But user space is not aware when
we enter self-refresh, so this appears to be an API violation -- that
DRM_IOCTL_WAIT_VBLANK fails with EINVAL whenever the display is idle and
enters self-refresh.
The downstream driver used by many of these systems never used to
disable vblank for PSR, and in fact, even upstream, we didn't do that
until radically redesigning the state machine in commit 6c836d965bad
("drm/rockchip: Use the helpers for PSR").
Thus, it seems like a reasonable API fix to simply restore that
behavior, and leave vblank enabled.
Note that this appears to potentially unbalance the
drm_crtc_vblank_{off,on}() calls in some cases, but:
(a) drm_crtc_vblank_on() documents this as OK and
(b) if I do the naive balancing, I find state machine issues such that
we're not in sync properly; so it's easier to take advantage of (a).
This issue was exposed by IGT's kms_vblank tests, and reported by
KernelCI. The bug has been around a while (longer than KernelCI
noticed), but was only exposed once self-refresh was bugfixed more
recently, and so KernelCI could properly test it. Some other notes in:
https://lore.kernel.org/dri-devel/Y6OCg9BPnJvimQLT@google.com/
Re: renesas/master bisection: igt-kms-rockchip.kms_vblank.pipe-A-wait-forked on rk3399-gru-kevin
== Backporting notes: ==
Marking as 'Fixes' commit 6c836d965bad ("drm/rockchip: Use the helpers
for PSR"), but it probably depends on commit bed030a49f3e
("drm/rockchip: Don't fully disable vop on self refresh") as well.
We also need the previous patch ("drm/atomic: Allow vblank-enabled +
self-refresh "disable""), of course.
v3:
* no update
v2:
* skip unnecessary lock/unlock
Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR")
Cc: <stable@vger.kernel.org>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Link: https://lore.kernel.org/dri-devel/Y5itf0+yNIQa6fU4@sirena.org.uk/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109171809.v3.2.Ic07cba4ab9a7bd3618a9e4258b8f92ea7d10ae5a@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9d0e3cac3517942a6e00eeecfe583a98715edb16 upstream.
The self-refresh helper framework overloads "disable" to sometimes mean
"go into self-refresh mode," and this mode activates automatically
(e.g., after some period of unchanging display output). In such cases,
the display pipe is still considered "on", and user-space is not aware
that we went into self-refresh mode. Thus, users may expect that
vblank-related features (such as DRM_IOCTL_WAIT_VBLANK) still work
properly.
However, we trigger the WARN_ONCE() here if a CRTC driver tries to leave
vblank enabled.
Add a different expectation: that CRTCs *should* leave vblank enabled
when going into self-refresh.
This patch is preparation for another patch -- "drm/rockchip: vop: Leave
vblank enabled in self-refresh" -- which resolves conflicts between the
above self-refresh behavior and the API tests in IGT's kms_vblank test
module.
== Some alternatives discussed: ==
It's likely that on many display controllers, vblank interrupts will
turn off when the CRTC is disabled, and so in some cases, self-refresh
may not support vblank. To support such cases, we might consider
additions to the generic helpers such that we fire vblank events based
on a timer.
However, there is currently only one driver using the common
self-refresh helpers (i.e., rockchip), and at least as of commit
bed030a49f3e ("drm/rockchip: Don't fully disable vop on self refresh"),
the CRTC hardware is powered enough to continue to generate vblank
interrupts.
So we chose the simpler option of leaving vblank interrupts enabled. We
can reevaluate this decision and perhaps augment the helpers if/when we
gain a second driver that has different requirements.
v3:
* include discussion summary
v2:
* add 'ret != 0' warning case for self-refresh
* describe failing test case and relation to drm/rockchip patch better
Cc: <stable@vger.kernel.org> # dependency for "drm/rockchip: vop: Leave
# vblank enabled in self-refresh"
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109171809.v3.1.I3904f697863649eb1be540ecca147a66e42bfad7@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2c56a751845ddfd3078ebe79981aaaa182629163 ]
The innolux at043tn24 display is a parallel LCD. Pass the 'connector_type'
information to avoid the following warning:
panel-simple panel: Specify missing connector_type
Signed-off-by: Fabio Estevam <festevam@denx.de>
Fixes: 41bcceb4de9c ("drm/panel: simple: Add support for Innolux AT043TN24")
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620112202.654981-1-festevam@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9a2654c0f62a1704f36acb6329f9ccbd539f75ad ]
Add a type field to the drm_panel structure to report the panel type,
using DRM_MODE_CONNECTOR_* macros (the values that make sense are LVDS,
eDP, DSI and DPI). This will be used to initialise the corresponding
connector type.
Update all panel drivers accordingly. The panel-simple driver only
specifies the type for the known to be LVDS panels, while all other
panels are left as unknown and will be converted on a case-by-case
basis as they all need to be carefully reviewed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-2-laurent.pinchart@ideasonboard.com
Stable-dep-of: 2c56a751845d ("drm/panel: simple: Add connector_type for innolux_at043tn24")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6dbe0c4b0fc0646442b2b1580d022404e582fd7b ]
Instead of requiring all drivers to set the dev and funcs fields of
drm_panel manually after calling drm_panel_init(), pass the data as
arguments to the function. This simplifies the panel drivers, and will
help future refactoring when adding new arguments to drm_panel_init().
The panel drivers have been updated with the following Coccinelle
semantic patch, with manual inspection to verify that no call to
drm_panel_init() with a single argument still exists.
@@
expression panel;
expression device;
identifier ops;
@@
drm_panel_init(&panel
+ , device, &ops
);
...
(
-panel.dev = device;
-panel.funcs = &ops;
|
-panel.funcs = &ops;
-panel.dev = device;
)
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-3-laurent.pinchart@ideasonboard.com
Stable-dep-of: 2c56a751845d ("drm/panel: simple: Add connector_type for innolux_at043tn24")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1becc57cd1a905e2aa0e1eca60d2a37744525c4a ]
Function rv740_get_decoded_reference_divider() may return 0 due to
unpredictable reference divider value calculated in
radeon_atom_get_clock_dividers(). This will lead to
division-by-zero error once that value is used as a divider
in calculating 'clk_s'.
While unlikely, this issue should nonetheless be prevented so add a
sanity check for such cases by testing 'decoded_ref' value against 0.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
v2: minor coding style fixes (Alex)
In practice this should actually happen as the vbios should be
properly populated.
Fixes: 66229b200598 ("drm/radeon/kms: add dpm support for rv7xx (v4)")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cabbdea1f1861098991768d7bbf5a49ed1608213 ]
Pointer mqd_mem_obj can be deallocated in kfd_gtt_sa_allocate().
The function then returns non-zero value, which causes the second deallocation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d1f8f0d17d40 ("drm/amdkfd: Move non-sdma mqd allocation out of init_mqd")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f24b49550814fdee4a98b9552e35e243ccafd4a8 ]
The previous setting was related to the overall dimension and not to the
active display area.
In the "PHYSICAL SPECIFICATIONS" section, the datasheet shows the
following parameters:
----------------------------------------------------------
| Item | Specifications | unit |
----------------------------------------------------------
| Display area | 98.7 (W) x 57.5 (H) | mm |
----------------------------------------------------------
| Overall dimension | 105.5(W) x 67.2(H) x 4.96(D) | mm |
----------------------------------------------------------
Fixes: 966fea78adf2 ("drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
[narmstrong: fixed Fixes commit id length]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230516085039.3797303-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 123ee07ba5b7123e0ce0e0f9d64938026c16a2ce ]
Smatch reports:
drivers/gpu/drm/sun4i/sun4i_tcon.c:805 sun4i_tcon_init_clocks() warn:
'tcon->clk' from clk_prepare_enable() not released on lines: 792,801.
In the function sun4i_tcon_init_clocks(), tcon->clk and tcon->sclk0 are
not disabled in the error handling, which affects the release of
these variable. Although sun4i_tcon_bind(), which calls
sun4i_tcon_init_clocks(), use sun4i_tcon_free_clocks to disable the
variables mentioned, but the error handling branch of
sun4i_tcon_init_clocks() ignores the required disable process.
To fix this issue, use the devm_clk_get_enabled to automatically
balance enable and disabled calls. As original implementation use
sun4i_tcon_free_clocks() to disable clk explicitly, we delete the
related calls and error handling that are no longer needed.
Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Fixes: b14e945bda8a ("drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init")
Fixes: 8e9240472522 ("drm/sun4i: support TCONs without channel 1")
Fixes: 34d698f6e349 ("drm/sun4i: Add has_channel_0 TCON quirk")
Signed-off-by: XuDong Liu <m202071377@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230430112347.4689-1-m202071377@hust.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 20c3dffdccbd494e0dd631d1660aeecbff6775f2 ]
Several calls to ci_dpm_fini() will attempt to free resources that
either have been freed before or haven't been allocated yet. This
may lead to undefined or dangerous behaviour.
For instance, if r600_parse_extended_power_table() fails, it might
call r600_free_extended_power_table() as will ci_dpm_fini() later
during error handling.
Fix this by only freeing pointers to objects previously allocated.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)")
Co-developed-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a2b308044dcaca8d3e580959a4f867a1d5c37fac upstream.
None have been defined yet, so reject anybody setting any. Mesa sets
it to 0 anyway.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b79ffa914ede785a721f42d8ee3ce7b8eeede2bb upstream.
Just in case the caller passes in 0 for both slow&fast timeouts, make
sure we initialise the stack value returned. Add an assert so that we
don't make the mistake of passing 0 timeouts for the wait.
drivers/gpu/drm/i915/intel_uncore.c:2011 __intel_wait_for_register_fw() error: uninitialized symbol 'reg_value'.
References: 3f649ab728cd ("treewide: Remove uninitialized_var() usage")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916105022.28316-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 982b173a6c6d9472730c3116051977e05d17c8c5 ]
Userspace can race to free the gobj(robj converted from), robj should not
be accessed again after drm_gem_object_put, otherwith it will result in
use-after-free.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 48bfd02569f5db49cc033f259e66d57aa6efc9a3 ]
If it is async, runqueue_node is freed in g2d_runqueue_worker on another
worker thread. So in extreme cases, if g2d_runqueue_worker runs first, and
then executes the following if statement, there will be use-after-free.
Signed-off-by: Min Li <lm0963hack@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a059559809fd1ddbf16f847c4d2237309c08edf ]
Fix a wrong error return by dropping an error return.
When vidi driver is remvoed, if ctx->raw_edid isn't same as fake_edid_info
then only what we have to is to free ctx->raw_edid so that driver removing
can work correctly - it's not an error case.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 630f512280604eecae0ddc2b3f8402f7931c56fd upstream.
This oops manifests itself on the following hardware:
01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce G 103M] (rev a1)
Oct 09 14:17:46 lp-sasha kernel: BUG: kernel NULL pointer dereference, address: 0000000000000000
Oct 09 14:17:46 lp-sasha kernel: #PF: supervisor read access in kernel mode
Oct 09 14:17:46 lp-sasha kernel: #PF: error_code(0x0000) - not-present page
Oct 09 14:17:46 lp-sasha kernel: PGD 0 P4D 0
Oct 09 14:17:46 lp-sasha kernel: Oops: 0000 [#1] SMP PTI
Oct 09 14:17:46 lp-sasha kernel: CPU: 1 PID: 191 Comm: systemd-udevd Not tainted 5.9.0-rc8-next-20201009 #38
Oct 09 14:17:46 lp-sasha kernel: Hardware name: Hewlett-Packard Compaq Presario CQ61 Notebook PC/306A, BIOS F.03 03/23/2009
Oct 09 14:17:46 lp-sasha kernel: RIP: 0010:nouveau_connector_detect_depth+0x71/0xc0 [nouveau]
Oct 09 14:17:46 lp-sasha kernel: Code: 0a 00 00 48 8b 49 48 c7 87 b8 00 00 00 06 00 00 00 80 b9 4d 0a 00 00 00 75 1e 83 fa 41 75 05 48 85 c0 75 29 8b 81 10 0d 00 00 <39> 06 7c 25 f6 81 14 0d 00 00 02 75 b7 c3 80 b9 0c 0d 00 00 00 75
Oct 09 14:17:46 lp-sasha kernel: RSP: 0018:ffffc9000028f8c0 EFLAGS: 00010297
Oct 09 14:17:46 lp-sasha kernel: RAX: 0000000000014c08 RBX: ffff8880369d4000 RCX: ffff8880369d3000
Oct 09 14:17:46 lp-sasha kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: ffff8880369d4000
Oct 09 14:17:46 lp-sasha kernel: RBP: ffff88800601cc00 R08: ffff8880051da298 R09: ffffffff8226201a
Oct 09 14:17:46 lp-sasha kernel: R10: ffff88800469aa80 R11: ffff888004c84ff8 R12: 0000000000000000
Oct 09 14:17:46 lp-sasha kernel: R13: ffff8880051da000 R14: 0000000000002000 R15: 0000000000000003
Oct 09 14:17:46 lp-sasha kernel: FS: 00007fd0192b3440(0000) GS:ffff8880bc900000(0000) knlGS:0000000000000000
Oct 09 14:17:46 lp-sasha kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Oct 09 14:17:46 lp-sasha kernel: CR2: 0000000000000000 CR3: 0000000004976000 CR4: 00000000000006e0
Oct 09 14:17:46 lp-sasha kernel: Call Trace:
Oct 09 14:17:46 lp-sasha kernel: nouveau_connector_get_modes+0x1e6/0x240 [nouveau]
Oct 09 14:17:46 lp-sasha kernel: ? kfree+0xb9/0x240
Oct 09 14:17:46 lp-sasha kernel: ? drm_connector_list_iter_next+0x7c/0xa0
Oct 09 14:17:46 lp-sasha kernel: drm_helper_probe_single_connector_modes+0x1ba/0x7c0
Oct 09 14:17:46 lp-sasha kernel: drm_client_modeset_probe+0x27e/0x1360
Oct 09 14:17:46 lp-sasha kernel: ? nvif_object_sclass_put+0xc/0x20 [nouveau]
Oct 09 14:17:46 lp-sasha kernel: ? nouveau_cli_init+0x3cc/0x440 [nouveau]
Oct 09 14:17:46 lp-sasha kernel: ? ktime_get_mono_fast_ns+0x49/0xa0
Oct 09 14:17:46 lp-sasha kernel: ? nouveau_drm_open+0x4e/0x180 [nouveau]
Oct 09 14:17:46 lp-sasha kernel: __drm_fb_helper_initial_config_and_unlock+0x3f/0x4a0
Oct 09 14:17:46 lp-sasha kernel: ? drm_file_alloc+0x18f/0x260
Oct 09 14:17:46 lp-sasha kernel: ? mutex_lock+0x9/0x40
Oct 09 14:17:46 lp-sasha kernel: ? drm_client_init+0x110/0x160
Oct 09 14:17:46 lp-sasha kernel: nouveau_fbcon_init+0x14d/0x1c0 [nouveau]
Oct 09 14:17:46 lp-sasha kernel: nouveau_drm_device_init+0x1c0/0x880 [nouveau]
Oct 09 14:17:46 lp-sasha kernel: nouveau_drm_probe+0x11a/0x1e0 [nouveau]
Oct 09 14:17:46 lp-sasha kernel: pci_device_probe+0xcd/0x140
Oct 09 14:17:46 lp-sasha kernel: really_probe+0xd8/0x400
Oct 09 14:17:46 lp-sasha kernel: driver_probe_device+0x4a/0xa0
Oct 09 14:17:46 lp-sasha kernel: device_driver_attach+0x9c/0xc0
Oct 09 14:17:46 lp-sasha kernel: __driver_attach+0x6f/0x100
Oct 09 14:17:46 lp-sasha kernel: ? device_driver_attach+0xc0/0xc0
Oct 09 14:17:46 lp-sasha kernel: bus_for_each_dev+0x75/0xc0
Oct 09 14:17:46 lp-sasha kernel: bus_add_driver+0x106/0x1c0
Oct 09 14:17:46 lp-sasha kernel: driver_register+0x86/0xe0
Oct 09 14:17:46 lp-sasha kernel: ? 0xffffffffa044e000
Oct 09 14:17:46 lp-sasha kernel: do_one_initcall+0x48/0x1e0
Oct 09 14:17:46 lp-sasha kernel: ? _cond_resched+0x11/0x60
Oct 09 14:17:46 lp-sasha kernel: ? kmem_cache_alloc_trace+0x19c/0x1e0
Oct 09 14:17:46 lp-sasha kernel: do_init_module+0x57/0x220
Oct 09 14:17:46 lp-sasha kernel: __do_sys_finit_module+0xa0/0xe0
Oct 09 14:17:46 lp-sasha kernel: do_syscall_64+0x33/0x40
Oct 09 14:17:46 lp-sasha kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9
Oct 09 14:17:46 lp-sasha kernel: RIP: 0033:0x7fd01a060d5d
Oct 09 14:17:46 lp-sasha kernel: Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e3 70 0c 00 f7 d8 64 89 01 48
Oct 09 14:17:46 lp-sasha kernel: RSP: 002b:00007ffc8ad38a98 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
Oct 09 14:17:46 lp-sasha kernel: RAX: ffffffffffffffda RBX: 0000563f6e7fd530 RCX: 00007fd01a060d5d
Oct 09 14:17:46 lp-sasha kernel: RDX: 0000000000000000 RSI: 00007fd01a19f95d RDI: 000000000000000f
Oct 09 14:17:46 lp-sasha kernel: RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000007
Oct 09 14:17:46 lp-sasha kernel: R10: 000000000000000f R11: 0000000000000246 R12: 00007fd01a19f95d
Oct 09 14:17:46 lp-sasha kernel: R13: 0000000000000000 R14: 0000563f6e7fbc10 R15: 0000563f6e7fd530
Oct 09 14:17:46 lp-sasha kernel: Modules linked in: nouveau(+) ttm xt_string xt_mark xt_LOG vgem v4l2_dv_timings uvcvideo ulpi udf ts_kmp ts_fsm ts_bm snd_aloop sil164 qat_dh895xccvf nf_nat_sip nf_nat_irc nf_nat_ftp nf_nat nf_log_ipv6 nf_log_ipv4 nf_log_common ltc2990 lcd intel_qat input_leds i2c_mux gspca_main videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc drivetemp cuse fuse crc_itu_t coretemp ch7006 ath5k ath algif_hash
Oct 09 14:17:46 lp-sasha kernel: CR2: 0000000000000000
Oct 09 14:17:46 lp-sasha kernel: ---[ end trace 0ddafe218ad30017 ]---
Oct 09 14:17:46 lp-sasha kernel: RIP: 0010:nouveau_connector_detect_depth+0x71/0xc0 [nouveau]
Oct 09 14:17:46 lp-sasha kernel: Code: 0a 00 00 48 8b 49 48 c7 87 b8 00 00 00 06 00 00 00 80 b9 4d 0a 00 00 00 75 1e 83 fa 41 75 05 48 85 c0 75 29 8b 81 10 0d 00 00 <39> 06 7c 25 f6 81 14 0d 00 00 02 75 b7 c3 80 b9 0c 0d 00 00 00 75
Oct 09 14:17:46 lp-sasha kernel: RSP: 0018:ffffc9000028f8c0 EFLAGS: 00010297
Oct 09 14:17:46 lp-sasha kernel: RAX: 0000000000014c08 RBX: ffff8880369d4000 RCX: ffff8880369d3000
Oct 09 14:17:46 lp-sasha kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: ffff8880369d4000
Oct 09 14:17:46 lp-sasha kernel: RBP: ffff88800601cc00 R08: ffff8880051da298 R09: ffffffff8226201a
Oct 09 14:17:46 lp-sasha kernel: R10: ffff88800469aa80 R11: ffff888004c84ff8 R12: 0000000000000000
Oct 09 14:17:46 lp-sasha kernel: R13: ffff8880051da000 R14: 0000000000002000 R15: 0000000000000003
Oct 09 14:17:46 lp-sasha kernel: FS: 00007fd0192b3440(0000) GS:ffff8880bc900000(0000) knlGS:0000000000000000
Oct 09 14:17:46 lp-sasha kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Oct 09 14:17:46 lp-sasha kernel: CR2: 0000000000000000 CR3: 0000000004976000 CR4: 00000000000006e0
The disassembly:
Code: 0a 00 00 48 8b 49 48 c7 87 b8 00 00 00 06 00 00 00 80 b9 4d 0a 00 00 00 75 1e 83 fa 41 75 05 48 85 c0 75 29 8b 81 10 0d 00 00 <39> 06 7c 25 f6 81 14 0d 00 00 02 75 b7 c3 80 b9 0c 0d 00 00 00 75
All code
========
0: 0a 00 or (%rax),%al
2: 00 48 8b add %cl,-0x75(%rax)
5: 49 rex.WB
6: 48 c7 87 b8 00 00 00 movq $0x6,0xb8(%rdi)
d: 06 00 00 00
11: 80 b9 4d 0a 00 00 00 cmpb $0x0,0xa4d(%rcx)
18: 75 1e jne 0x38
1a: 83 fa 41 cmp $0x41,%edx
1d: 75 05 jne 0x24
1f: 48 85 c0 test %rax,%rax
22: 75 29 jne 0x4d
24: 8b 81 10 0d 00 00 mov 0xd10(%rcx),%eax
2a:* 39 06 cmp %eax,(%rsi) <-- trapping instruction
2c: 7c 25 jl 0x53
2e: f6 81 14 0d 00 00 02 testb $0x2,0xd14(%rcx)
35: 75 b7 jne 0xffffffffffffffee
37: c3 retq
38: 80 b9 0c 0d 00 00 00 cmpb $0x0,0xd0c(%rcx)
3f: 75 .byte 0x75
Code starting with the faulting instruction
===========================================
0: 39 06 cmp %eax,(%rsi)
2: 7c 25 jl 0x29
4: f6 81 14 0d 00 00 02 testb $0x2,0xd14(%rcx)
b: 75 b7 jne 0xffffffffffffffc4
d: c3 retq
e: 80 b9 0c 0d 00 00 00 cmpb $0x0,0xd0c(%rcx)
15: 75 .byte 0x75
objdump -SF --disassemble=nouveau_connector_detect_depth
[...]
if (nv_connector->edid &&
c85e1: 83 fa 41 cmp $0x41,%edx
c85e4: 75 05 jne c85eb <nouveau_connector_detect_depth+0x6b> (File Offset: 0xc866b)
c85e6: 48 85 c0 test %rax,%rax
c85e9: 75 29 jne c8614 <nouveau_connector_detect_depth+0x94> (File Offset: 0xc8694)
nv_connector->type == DCB_CONNECTOR_LVDS_SPWG)
duallink = ((u8 *)nv_connector->edid)[121] == 2;
else
duallink = mode->clock >= bios->fp.duallink_transition_clk;
if ((!duallink && (bios->fp.strapless_is_24bit & 1)) ||
c85eb: 8b 81 10 0d 00 00 mov 0xd10(%rcx),%eax
c85f1: 39 06 cmp %eax,(%rsi)
c85f3: 7c 25 jl c861a <nouveau_connector_detect_depth+0x9a> (File Offset: 0xc869a)
( duallink && (bios->fp.strapless_is_24bit & 2)))
c85f5: f6 81 14 0d 00 00 02 testb $0x2,0xd14(%rcx)
c85fc: 75 b7 jne c85b5 <nouveau_connector_detect_depth+0x35> (File Offset: 0xc8635)
connector->display_info.bpc = 8;
[...]
% scripts/faddr2line /lib/modules/5.9.0-rc8-next-20201009/kernel/drivers/gpu/drm/nouveau/nouveau.ko nouveau_connector_detect_depth+0x71/0xc0
nouveau_connector_detect_depth+0x71/0xc0:
nouveau_connector_detect_depth at /home/sasha/linux-next/drivers/gpu/drm/nouveau/nouveau_connector.c:891
It is actually line 889. See the disassembly below.
889 duallink = mode->clock >= bios->fp.duallink_transition_clk;
The NULL pointer being dereferenced is mode.
Git bisect has identified the following commit as bad:
f28e32d3906e drm/nouveau/kms: Don't change EDID when it hasn't actually changed
Here is the chain of events that causes the oops.
On entry to nouveau_connector_detect_lvds, edid is set to NULL. The call
to nouveau_connector_detect sets nv_connector->edid to valid memory,
with status set to connector_status_connected and the flow of execution
branching to the out label.
The subsequent call to nouveau_connector_set_edid erronously clears
nv_connector->edid, via the local edid pointer which remains set to NULL.
Fix this by setting edid to the value of the just acquired
nv_connector->edid and executing the body of nouveau_connector_set_edid
only if nv_connector->edid and edid point to different memory addresses
thus preventing nv_connector->edid from being turned into a dangling
pointer.
Fixes: f28e32d3906e ("drm/nouveau/kms: Don't change EDID when it hasn't actually changed")
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 55b94bb8c42464bad3d2217f6874aa1a85664eac ]
Pointer nv_encoder could be dereferenced at nouveau_connector.c
in case it's equal to NULL by jumping to goto label.
This patch adds a NULL-check to avoid it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 3195c5f9784a ("drm/nouveau: set encoder for lvds")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Fixed patch title]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512103320.82234-1-n.petrova@fintech.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f28e32d3906eac2e1cb3291b448f0d528ec93996 ]
Currently in nouveau_connector_ddc_detect() and
nouveau_connector_detect_lvds(), we start the connector probing process
by releasing the previous EDID and informing DRM of the change. However,
since commit 5186421cbfe2 ("drm: Introduce epoch counter to
drm_connector") drm_connector_update_edid_property() actually checks
whether the new EDID we've specified is different from the previous one,
and updates the connector's epoch accordingly if it is. But, because we
always set the EDID to NULL first in nouveau_connector_ddc_detect() and
nouveau_connector_detect_lvds() we end up making DRM think that the EDID
changes every single time we do a connector probe - which isn't needed.
So, let's fix this by not clearing the EDID at the start of the
connector probing process, and instead simply changing or removing it
once near the end of the probing process. This will help prevent us from
sending unneeded hotplug events to userspace when nothing has actually
changed.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-19-lyude@redhat.com
Stable-dep-of: 55b94bb8c424 ("drm/nouveau: add nv_encoder pointer check for NULL")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 20a2ce87fbaf81e4c3dcb631d738e423959eb320 ]
Add checking for NULL before calling nouveau_connector_detect_depth() in
nouveau_connector_get_modes() function because nv_connector->native_mode
could be dereferenced there since connector pointer passed to
nouveau_connector_detect_depth() and the same value of
nv_connector->native_mode is used there.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d4c2c99bdc83 ("drm/nouveau/dp: remove broken display depth function, use the improved one")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512111526.82408-1-n.petrova@fintech.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c8a5d5ea3ba6a18958f8d76430e4cd68eea33943 upstream.
This seems to have existed for ever but is now more apparant after
commit 9bff18d13473 ("drm/ttm: use per BO cleanup workers")
My analysis: two threads are running, one in the irq signalling the
fence, in dma_fence_signal_timestamp_locked, it has done the
DMA_FENCE_FLAG_SIGNALLED_BIT setting, but hasn't yet reached the
callbacks.
The second thread in nouveau_cli_work_ready, where it sees the fence is
signalled, so then puts the fence, cleanups the object and frees the
work item, which contains the callback.
Thread one goes again and tries to call the callback and causes the
use-after-free.
Proposed fix: lock the fence signalled check in nouveau_cli_work_ready,
so either the callbacks are done or the memory is freed.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Fixes: 11e451e74050 ("drm/nouveau: remove fence wait code from deferred client work handler")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/dri-devel/20230615024008.1600281-1-airlied@gmail.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 60ecaaf54886b0642d5c4744f7fbf1ff0d6b3e42 ]
smatch warning -
1) drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:3615 gfx_v9_0_kiq_resume()
warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'.
2) drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:6901 gfx_v10_0_kiq_resume()
warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'.
Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 439cf34c8e0a8a33d8c15a31be1b7423426bc765 upstream.
Make sure we don't assign an error pointer to crtc_state->mode_blob
as that will break all kinds of places that assume either NULL or a
valid pointer (eg. drm_property_blob_put()).
Cc: stable@vger.kernel.org
Reported-by: fuyufan <fuyufan@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220209091928.14766-1-ville.syrjala@linux.intel.com
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Bjorn Helgaas
Ilpo Järvinen
Frederick Lawler
Sui Jingfeng
Daniel Vetter
Marek Vasut
Geert Uytterhoeven
Yangtao Li
Tan Zhongjun
Srinivasan Shanmugam
Bogdan Togorean
Lucas Stach
Arnd Bergmann
Taimur Hassan
Josip Pavic
shanzhulig
hackyzh002
Karol Herbst
Gaosheng Cui
Rob Clark
Dmitry Baryshkov
Jocelyn Falempe
Brian Norris
Fabio Estevam
Laurent Pinchart
Nikita Zhandarovich
Daniil Dulov
Dario Binacchi
XuDong Liu
Bas Nieuwenhuizen
Chris Wilson
Min Li
Inki Dae
Alexander Kapshuk
Natalia Petrova
Lyude Paul
Dave Airlie
Sukrut Bellary
Ville Syrjälä