Age | Commit message (Collapse) | Author |
|
commit 9765635b30756eb74e05e260ac812659c296cd28 upstream.
This reverts commit:
c54c7374ff44 ("drm/dp_mst: Skip validating ports during destruction, just ref")
ugh.
In drm_dp_destroy_connector_work(), we have a pretty good chance of
freeing the actual struct drm_dp_mst_port. However, after destroying
things we send a hotplug through (*mgr->cbs->hotplug)(mgr) which is
where the problems start.
For i915, this calls all the way down to the fbcon probing helpers,
which start trying to access the port in a modeset.
[ 45.062001] ==================================================================
[ 45.062112] BUG: KASAN: use-after-free in ex_handler_refcount+0x146/0x180
[ 45.062196] Write of size 4 at addr ffff8882b4b70968 by task kworker/3:1/53
[ 45.062325] CPU: 3 PID: 53 Comm: kworker/3:1 Kdump: loaded Tainted: G O 4.20.0-rc4Lyude-Test+ #3
[ 45.062442] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018
[ 45.062554] Workqueue: events drm_dp_destroy_connector_work [drm_kms_helper]
[ 45.062641] Call Trace:
[ 45.062685] dump_stack+0xbd/0x15a
[ 45.062735] ? dump_stack_print_info.cold.0+0x1b/0x1b
[ 45.062801] ? printk+0x9f/0xc5
[ 45.062847] ? kmsg_dump_rewind_nolock+0xe4/0xe4
[ 45.062909] ? ex_handler_refcount+0x146/0x180
[ 45.062970] print_address_description+0x71/0x239
[ 45.063036] ? ex_handler_refcount+0x146/0x180
[ 45.063095] kasan_report.cold.5+0x242/0x30b
[ 45.063155] __asan_report_store4_noabort+0x1c/0x20
[ 45.063313] ex_handler_refcount+0x146/0x180
[ 45.063371] ? ex_handler_clear_fs+0xb0/0xb0
[ 45.063428] fixup_exception+0x98/0xd7
[ 45.063484] ? raw_notifier_call_chain+0x20/0x20
[ 45.063548] do_trap+0x6d/0x210
[ 45.063605] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.063732] do_error_trap+0xc0/0x170
[ 45.063802] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.063929] do_invalid_op+0x3b/0x50
[ 45.063997] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.064103] invalid_op+0x14/0x20
[ 45.064162] RIP: 0010:_GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.064274] Code: 00 48 c7 c7 80 fe 53 a0 48 89 e5 e8 5b 6f 26 e1 5d c3 48 8d 0e 0f 0b 48 8d 0b 0f 0b 48 8d 0f 0f 0b 48 8d 0f 0f 0b 49 8d 4d 00 <0f> 0b 49 8d 0e 0f 0b 48 8d 08 0f 0b 49 8d 4d 00 0f 0b 48 8d 0b 0f
[ 45.064569] RSP: 0018:ffff8882b789ee10 EFLAGS: 00010282
[ 45.064637] RAX: ffff8882af47ae70 RBX: ffff8882af47aa60 RCX: ffff8882b4b70968
[ 45.064723] RDX: ffff8882af47ae70 RSI: 0000000000000008 RDI: ffff8882b788bdb8
[ 45.064808] RBP: ffff8882b789ee28 R08: ffffed1056f13db4 R09: ffffed1056f13db3
[ 45.064894] R10: ffffed1056f13db3 R11: ffff8882b789ed9f R12: ffff8882af47ad28
[ 45.064980] R13: ffff8882b4b70968 R14: ffff8882acd86728 R15: ffff8882b4b75dc8
[ 45.065084] drm_dp_mst_reset_vcpi_slots+0x12/0x80 [drm_kms_helper]
[ 45.065225] intel_mst_disable_dp+0xda/0x180 [i915]
[ 45.065361] intel_encoders_disable.isra.107+0x197/0x310 [i915]
[ 45.065498] haswell_crtc_disable+0xbe/0x400 [i915]
[ 45.065622] ? i9xx_disable_plane+0x1c0/0x3e0 [i915]
[ 45.065750] intel_atomic_commit_tail+0x74e/0x3e60 [i915]
[ 45.065884] ? intel_pre_plane_update+0xbc0/0xbc0 [i915]
[ 45.065968] ? drm_atomic_helper_swap_state+0x88b/0x1d90 [drm_kms_helper]
[ 45.066054] ? kasan_check_write+0x14/0x20
[ 45.066165] ? i915_gem_track_fb+0x13a/0x330 [i915]
[ 45.066277] ? i915_sw_fence_complete+0xe9/0x140 [i915]
[ 45.066406] ? __i915_sw_fence_complete+0xc50/0xc50 [i915]
[ 45.066540] intel_atomic_commit+0x72e/0xef0 [i915]
[ 45.066635] ? drm_dev_dbg+0x200/0x200 [drm]
[ 45.066764] ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[ 45.066898] ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[ 45.067001] drm_atomic_commit+0xc4/0xf0 [drm]
[ 45.067074] restore_fbdev_mode_atomic+0x562/0x780 [drm_kms_helper]
[ 45.067166] ? drm_fb_helper_debug_leave+0x690/0x690 [drm_kms_helper]
[ 45.067249] ? kasan_check_read+0x11/0x20
[ 45.067324] restore_fbdev_mode+0x127/0x4b0 [drm_kms_helper]
[ 45.067364] ? kasan_check_read+0x11/0x20
[ 45.067406] drm_fb_helper_restore_fbdev_mode_unlocked+0x164/0x200 [drm_kms_helper]
[ 45.067462] ? drm_fb_helper_hotplug_event+0x30/0x30 [drm_kms_helper]
[ 45.067508] ? kasan_check_write+0x14/0x20
[ 45.070360] ? mutex_unlock+0x22/0x40
[ 45.073748] drm_fb_helper_set_par+0xb2/0xf0 [drm_kms_helper]
[ 45.075846] drm_fb_helper_hotplug_event.part.33+0x1cd/0x290 [drm_kms_helper]
[ 45.078088] drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper]
[ 45.082614] intel_fbdev_output_poll_changed+0x9f/0x140 [i915]
[ 45.087069] drm_kms_helper_hotplug_event+0x67/0x90 [drm_kms_helper]
[ 45.089319] intel_dp_mst_hotplug+0x37/0x50 [i915]
[ 45.091496] drm_dp_destroy_connector_work+0x510/0x6f0 [drm_kms_helper]
[ 45.093675] ? drm_dp_update_payload_part1+0x1220/0x1220 [drm_kms_helper]
[ 45.095851] ? kasan_check_write+0x14/0x20
[ 45.098473] ? kasan_check_read+0x11/0x20
[ 45.101155] ? strscpy+0x17c/0x530
[ 45.103808] ? __switch_to_asm+0x34/0x70
[ 45.106456] ? syscall_return_via_sysret+0xf/0x7f
[ 45.109711] ? read_word_at_a_time+0x20/0x20
[ 45.113138] ? __switch_to_asm+0x40/0x70
[ 45.116529] ? __switch_to_asm+0x34/0x70
[ 45.119891] ? __switch_to_asm+0x40/0x70
[ 45.123224] ? __switch_to_asm+0x34/0x70
[ 45.126540] ? __switch_to_asm+0x34/0x70
[ 45.129824] process_one_work+0x88d/0x15d0
[ 45.133172] ? pool_mayday_timeout+0x850/0x850
[ 45.136459] ? pci_mmcfg_check_reserved+0x110/0x128
[ 45.139739] ? wake_q_add+0xb0/0xb0
[ 45.143010] ? check_preempt_wakeup+0x652/0x1050
[ 45.146304] ? worker_enter_idle+0x29e/0x740
[ 45.149589] ? __schedule+0x1ec0/0x1ec0
[ 45.152937] ? kasan_check_read+0x11/0x20
[ 45.156179] ? _raw_spin_lock_irq+0xa3/0x130
[ 45.159382] ? _raw_read_unlock_irqrestore+0x30/0x30
[ 45.162542] ? kasan_check_write+0x14/0x20
[ 45.165657] worker_thread+0x1a5/0x1470
[ 45.168725] ? set_load_weight+0x2e0/0x2e0
[ 45.171755] ? process_one_work+0x15d0/0x15d0
[ 45.174806] ? __switch_to_asm+0x34/0x70
[ 45.177645] ? __switch_to_asm+0x40/0x70
[ 45.180323] ? __switch_to_asm+0x34/0x70
[ 45.182936] ? __switch_to_asm+0x40/0x70
[ 45.185539] ? __switch_to_asm+0x34/0x70
[ 45.188100] ? __switch_to_asm+0x40/0x70
[ 45.190628] ? __schedule+0x7d4/0x1ec0
[ 45.193143] ? save_stack+0xa9/0xd0
[ 45.195632] ? kasan_check_write+0x10/0x20
[ 45.198162] ? kasan_kmalloc+0xc4/0xe0
[ 45.200609] ? kmem_cache_alloc_trace+0xdd/0x190
[ 45.203046] ? kthread+0x9f/0x3b0
[ 45.205470] ? ret_from_fork+0x35/0x40
[ 45.207876] ? unwind_next_frame+0x43/0x50
[ 45.210273] ? __save_stack_trace+0x82/0x100
[ 45.212658] ? deactivate_slab.isra.67+0x3d4/0x580
[ 45.215026] ? default_wake_function+0x35/0x50
[ 45.217399] ? kasan_check_read+0x11/0x20
[ 45.219825] ? _raw_spin_lock_irqsave+0xae/0x140
[ 45.222174] ? __lock_text_start+0x8/0x8
[ 45.224521] ? replenish_dl_entity.cold.62+0x4f/0x4f
[ 45.226868] ? __kthread_parkme+0x87/0xf0
[ 45.229200] kthread+0x2f7/0x3b0
[ 45.231557] ? process_one_work+0x15d0/0x15d0
[ 45.233923] ? kthread_park+0x120/0x120
[ 45.236249] ret_from_fork+0x35/0x40
[ 45.240875] Allocated by task 242:
[ 45.243136] save_stack+0x43/0xd0
[ 45.245385] kasan_kmalloc+0xc4/0xe0
[ 45.247597] kmem_cache_alloc_trace+0xdd/0x190
[ 45.249793] drm_dp_add_port+0x1e0/0x2170 [drm_kms_helper]
[ 45.252000] drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper]
[ 45.254389] drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper]
[ 45.256803] drm_dp_mst_link_probe_work+0x6f/0xb0 [drm_kms_helper]
[ 45.259200] process_one_work+0x88d/0x15d0
[ 45.261597] worker_thread+0x1a5/0x1470
[ 45.264038] kthread+0x2f7/0x3b0
[ 45.266371] ret_from_fork+0x35/0x40
[ 45.270937] Freed by task 53:
[ 45.273170] save_stack+0x43/0xd0
[ 45.275382] __kasan_slab_free+0x139/0x190
[ 45.277604] kasan_slab_free+0xe/0x10
[ 45.279826] kfree+0x99/0x1b0
[ 45.282044] drm_dp_free_mst_port+0x4a/0x60 [drm_kms_helper]
[ 45.284330] drm_dp_destroy_connector_work+0x43e/0x6f0 [drm_kms_helper]
[ 45.286660] process_one_work+0x88d/0x15d0
[ 45.288934] worker_thread+0x1a5/0x1470
[ 45.291231] kthread+0x2f7/0x3b0
[ 45.293547] ret_from_fork+0x35/0x40
[ 45.298206] The buggy address belongs to the object at ffff8882b4b70968
which belongs to the cache kmalloc-2k of size 2048
[ 45.303047] The buggy address is located 0 bytes inside of
2048-byte region [ffff8882b4b70968, ffff8882b4b71168)
[ 45.308010] The buggy address belongs to the page:
[ 45.310477] page:ffffea000ad2dc00 count:1 mapcount:0 mapping:ffff8882c080cf40 index:0x0 compound_mapcount: 0
[ 45.313051] flags: 0x8000000000010200(slab|head)
[ 45.315635] raw: 8000000000010200 ffffea000aac2808 ffffea000abe8608 ffff8882c080cf40
[ 45.318300] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[ 45.320966] page dumped because: kasan: bad access detected
[ 45.326312] Memory state around the buggy address:
[ 45.329085] ffff8882b4b70800: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 45.331845] ffff8882b4b70880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 45.334584] >ffff8882b4b70900: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb
[ 45.337302] ^
[ 45.340061] ffff8882b4b70980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 45.342910] ffff8882b4b70a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 45.345748] ==================================================================
So, this definitely isn't a fix that we want. This being said; there's
no real easy fix for this problem because of some of the catch-22's of
the MST helpers current design. For starters; we always need to validate
a port with drm_dp_get_validated_port_ref(), but validation relies on
the lifetime of the port in the actual topology. So once the port is
gone, it can't be validated again.
If we were to try to make the payload helpers not use port validation,
then we'd cause another problem: if the port isn't validated, it could
be freed and we'd just start causing more KASAN issues. There are
already hacks that attempt to workaround this in
drm_dp_mst_destroy_connector_work() by re-initializing the kref so that
it can be used again and it's memory can be freed once the VCPI helpers
finish removing the port's respective payloads. But none of these really
do anything helpful since the port still can't be validated since it's
gone from the topology. Also, that workaround is immensely confusing to
read through.
What really needs to be done in order to fix this is to teach DRM how to
track the lifetime of the structs for MST ports and branch devices
separately from their lifetime in the actual topology. Simply put; this
means having two different krefs-one that removes the port/branch device
from the topology, and one that finally calls kfree(). This would let us
simplify things, since we'd now be able to keep ports around without
having to keep them in the topology at the same time, which is exactly
what we need in order to teach our VCPI helpers to only validate ports
when it's actually necessary without running the risk of trying to use
unallocated memory.
Such a fix is on it's way, but for now let's play it safe and just
revert this. If this bug has been around for well over a year, we can
wait a little while to get an actual proper fix here.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: c54c7374ff44 ("drm/dp_mst: Skip validating ports during destruction, just ref")
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: stable@vger.kernel.org # v4.6+
Acked-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128210005.24434-1-lyude@redhat.com
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e8dca30f7118461d47e1c3510d0e31b277439151 upstream.
CTA-861-F explicitly states that for RGB colorspace colorimetry should
be set to "none". Fix that.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304232512.51616-2-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c0fd99d659ba5582e09625c7a985d63fc2ca74b5 ]
Writing to the built-in strings arrays doesn't work if driver is loaded
as kernel module. This is also considered as a bad pattern. Fix this by
adding a call to clk_get() with legacy clock name. This fixes following
kernel oops if driver is loaded as module:
Unable to handle kernel paging request at virtual address bf047978
pgd = (ptrval)
[bf047978] *pgd=59344811, *pte=5903c6df, *ppte=5903c65f
Internal error: Oops: 80f [#1] SMP ARM
Modules linked in: mc exynosdrm(+) analogix_dp rtc_s3c exynos_ppmu i2c_gpio
CPU: 1 PID: 212 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219 #326
videodev: Linux video capture interface: v2.00
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at exynos_dsi_probe+0x1f0/0x384 [exynosdrm]
LR is at exynos_dsi_probe+0x1dc/0x384 [exynosdrm]
...
Process systemd-udevd (pid: 212, stack limit = 0x(ptrval))
...
[<bf03cf14>] (exynos_dsi_probe [exynosdrm]) from [<c09b1ca0>] (platform_drv_probe+0x6c/0xa4)
[<c09b1ca0>] (platform_drv_probe) from [<c09afcb8>] (really_probe+0x210/0x350)
[<c09afcb8>] (really_probe) from [<c09aff74>] (driver_probe_device+0x60/0x1a0)
[<c09aff74>] (driver_probe_device) from [<c09b0254>] (device_driver_attach+0x58/0x60)
[<c09b0254>] (device_driver_attach) from [<c09b02dc>] (__driver_attach+0x80/0xbc)
[<c09b02dc>] (__driver_attach) from [<c09ade00>] (bus_for_each_dev+0x68/0xb4)
[<c09ade00>] (bus_for_each_dev) from [<c09aefd8>] (bus_add_driver+0x130/0x1e8)
[<c09aefd8>] (bus_add_driver) from [<c09b0d64>] (driver_register+0x78/0x110)
[<c09b0d64>] (driver_register) from [<bf038558>] (exynos_drm_init+0xe8/0x11c [exynosdrm])
[<bf038558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220)
[<c0302fa8>] (do_one_initcall) from [<c03dd02c>] (do_init_module+0x60/0x210)
[<c03dd02c>] (do_init_module) from [<c03dbf44>] (load_module+0x1c0c/0x2310)
[<c03dbf44>] (load_module) from [<c03dc85c>] (sys_finit_module+0xac/0xbc)
[<c03dc85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
Exception stack(0xd979bfa8 to 0xd979bff0)
...
---[ end trace db16efe05faab470 ]---
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a9d1e3f3f038785ebc72d53f1c409d07f6b4ff5 ]
Properly propagate error value from devm_regulator_bulk_get() and don't
confuse user with meaningless warning about failure in getting regulators
in case of deferred probe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d785476c608c621b345dd9396e8b21e90375cb0e upstream.
Variable grph_obj_type is being assigned twice, one of these is
redundant so remove it.
Addresses-Coverity: ("Evaluation order violation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a1028dcfd0dd97884072288d0c8ed7f30399b528 ]
Save pll state before dsi host is powered off. Without this change
some register values gets resetted.
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7fd2dfc3694922eb7ace4801b7208cf9f62ebc7d ]
I was hitting kCFI crashes when building with clang, and after
some digging finally narrowed it down to the
dsi_mgr_connector_mode_valid() function being implemented as
returning an int, instead of an enum drm_mode_status.
This patch fixes it, and appeases the opaque word of the kCFI
gods (seriously, clang inlining everything makes the kCFI
backtraces only really rough estimates of where things went
wrong).
Thanks as always to Sami for his help narrowing this down.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Alistair Delva <adelva@google.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: freedreno@lists.freedesktop.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef8c9809acb0805c991bba8bdd4749fc46d44a98 ]
Add rate limiting of the 'pp done time out' warnings since these
warnings can quickly fill the dmesg buffer.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3eb55e6f753a379e293395de8d5f3be28351a7f8 upstream.
ALL_ENGINES reset doesn't clobber display with the current gvt-g
supported platforms. Thus ALL_ENGINES reset shouldn't reset the
display engine registers emulated by gvt-g.
This fixes guest warning like
[ 14.622026] [drm] Initialized i915 1.6.0 20200114 for 0000:00:03.0 on minor 0
[ 14.967917] fbcon: i915drmfb (fb0) is primary device
[ 25.100188] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] E RROR [CRTC:51:pipe A] flip_done timed out
[ 25.100860] -----------[ cut here ]-----------
[ 25.100861] pll on state mismatch (expected 0, found 1)
[ 25.101024] WARNING: CPU: 1 PID: 30 at drivers/gpu/drm/i915/display/intel_dis play.c:14382 verify_single_dpll_state.isra.115+0x28f/0x320 [i915]
[ 25.101025] Modules linked in: intel_rapl_msr intel_rapl_common kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel i915 aesni_intel cr ypto_simd cryptd glue_helper cec rc_core video drm_kms_helper joydev drm input_l eds i2c_algo_bit serio_raw fb_sys_fops syscopyarea sysfillrect sysimgblt mac_hid qemu_fw_cfg sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 e1000 psmouse i2c_piix4 pata_acpi floppy
[ 25.101052] CPU: 1 PID: 30 Comm: kworker/u4:1 Not tainted 5.5.0+ #1
[ 25.101053] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1 .12.1-0-ga5cab58 04/01/2014
[ 25.101055] Workqueue: events_unbound async_run_entry_fn
[ 25.101092] RIP: 0010:verify_single_dpll_state.isra.115+0x28f/0x320 [i915]
[ 25.101093] Code: e0 d9 ff e9 a3 fe ff ff 80 3d e9 c2 11 00 00 44 89 f6 48 c7 c7 c0 9d 88 c0 75 3b e8 eb df d9 ff e9 c7 fe ff ff e8 d1 e0 ae c4 <0f> 0b e9 7a fe ff ff 80 3d c0 c2 11 00 00 8d 71 41 89 c2 48 c7 c7
[ 25.101093] RSP: 0018:ffffb1de80107878 EFLAGS: 00010286
[ 25.101094] RAX: 0000000000000000 RBX: ffffb1de80107884 RCX: 0000000000000007
[ 25.101095] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff94fdfdd19740
[ 25.101095] RBP: ffffb1de80107938 R08: 0000000d6bfdc7b4 R09: 000000000000002b
[ 25.101096] R10: ffff94fdf82dc000 R11: 0000000000000225 R12: 00000000000001f8
[ 25.101096] R13: ffff94fdb3ca6a90 R14: ffff94fdb3ca0000 R15: 0000000000000000
[ 25.101097] FS: 0000000000000000(0000) GS:ffff94fdfdd00000(0000) knlGS:00000 00000000000
[ 25.101098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 25.101098] CR2: 00007fbc3e2be9c8 CR3: 000000003339a003 CR4: 0000000000360ee0
[ 25.101101] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 25.101101] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 25.101102] Call Trace:
[ 25.101139] intel_atomic_commit_tail+0xde4/0x1520 [i915]
[ 25.101141] ? flush_workqueue_prep_pwqs+0xfa/0x130
[ 25.101142] ? flush_workqueue+0x198/0x3c0
[ 25.101174] intel_atomic_commit+0x2ad/0x320 [i915]
[ 25.101209] drm_atomic_commit+0x4a/0x50 [drm]
[ 25.101220] drm_client_modeset_commit_atomic+0x1c4/0x200 [drm]
[ 25.101231] drm_client_modeset_commit_force+0x47/0x170 [drm]
[ 25.101250] drm_fb_helper_restore_fbdev_mode_unlocked+0x4e/0xa0 [drm_kms_hel per]
[ 25.101255] drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper]
[ 25.101287] intel_fbdev_set_par+0x1a/0x40 [i915]
[ 25.101289] ? con_is_visible+0x2e/0x60
[ 25.101290] fbcon_init+0x378/0x600
[ 25.101292] visual_init+0xd5/0x130
[ 25.101296] do_bind_con_driver+0x217/0x430
[ 25.101297] do_take_over_console+0x7d/0x1b0
[ 25.101298] do_fbcon_takeover+0x5c/0xb0
[ 25.101299] fbcon_fb_registered+0x199/0x1a0
[ 25.101301] register_framebuffer+0x22c/0x330
[ 25.101306] __drm_fb_helper_initial_config_and_unlock+0x31a/0x520 [drm_kms_h elper]
[ 25.101311] drm_fb_helper_initial_config+0x35/0x40 [drm_kms_helper]
[ 25.101341] intel_fbdev_initial_config+0x18/0x30 [i915]
[ 25.101342] async_run_entry_fn+0x3c/0x150
[ 25.101343] process_one_work+0x1fd/0x3f0
[ 25.101344] worker_thread+0x34/0x410
[ 25.101346] kthread+0x121/0x140
[ 25.101346] ? process_one_work+0x3f0/0x3f0
[ 25.101347] ? kthread_park+0x90/0x90
[ 25.101350] ret_from_fork+0x35/0x40
[ 25.101351] --[ end trace b5b47d44cd998ba1 ]--
Fixes: 6294b61ba769 ("drm/i915/gvt: add missing display part reset for vGPU reset")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200221023234.28635-1-tina.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit db735fc4036bbe1fbe606819b5f0ff26cc76cdff ]
Turning on CONFIG_DMA_API_DEBUG_SG results in the following error:
[ 12.078665] msm ae00000.mdss: DMA-API: mapping sg segment longer than device claims to support [len=3526656] [max=65536]
[ 12.089870] WARNING: CPU: 6 PID: 334 at /mnt/host/source/src/third_party/kernel/v4.19/kernel/dma/debug.c:1301 debug_dma_map_sg+0x1dc/0x318
[ 12.102655] Modules linked in: joydev
[ 12.106442] CPU: 6 PID: 334 Comm: frecon Not tainted 4.19.0 #2
[ 12.112450] Hardware name: Google Cheza (rev3+) (DT)
[ 12.117566] pstate: 60400009 (nZCv daif +PAN -UAO)
[ 12.122506] pc : debug_dma_map_sg+0x1dc/0x318
[ 12.126995] lr : debug_dma_map_sg+0x1dc/0x318
[ 12.131487] sp : ffffff800cc3ba80
[ 12.134913] x29: ffffff800cc3ba80 x28: 0000000000000000
[ 12.140395] x27: 0000000000000004 x26: 0000000000000004
[ 12.145868] x25: ffffff8008e55b18 x24: 0000000000000000
[ 12.151337] x23: 00000000ffffffff x22: ffffff800921c000
[ 12.156809] x21: ffffffc0fa75b080 x20: ffffffc0f7195090
[ 12.162280] x19: ffffffc0f1c53280 x18: 0000000000000000
[ 12.167749] x17: 0000000000000000 x16: 0000000000000000
[ 12.173218] x15: 0000000000000000 x14: 0720072007200720
[ 12.178689] x13: 0720072007200720 x12: 0720072007200720
[ 12.184161] x11: 0720072007200720 x10: 0720072007200720
[ 12.189641] x9 : ffffffc0f1fc6b60 x8 : 0000000000000000
[ 12.195110] x7 : ffffff8008132ce0 x6 : 0000000000000000
[ 12.200585] x5 : 0000000000000000 x4 : ffffff8008134734
[ 12.206058] x3 : ffffff800cc3b830 x2 : ffffffc0f1fc6240
[ 12.211532] x1 : 25045a74f48a7400 x0 : 25045a74f48a7400
[ 12.217006] Call trace:
[ 12.219535] debug_dma_map_sg+0x1dc/0x318
[ 12.223671] get_pages+0x19c/0x20c
[ 12.227177] msm_gem_fault+0x64/0xfc
[ 12.230874] __do_fault+0x3c/0x140
[ 12.234383] __handle_mm_fault+0x70c/0xdb8
[ 12.238603] handle_mm_fault+0xac/0xc4
[ 12.242473] do_page_fault+0x1bc/0x3d4
[ 12.246342] do_translation_fault+0x54/0x88
[ 12.250652] do_mem_abort+0x60/0xf0
[ 12.254250] el0_da+0x20/0x24
[ 12.257317] irq event stamp: 67260
[ 12.260828] hardirqs last enabled at (67259): [<ffffff8008132d0c>] console_unlock+0x214/0x608
[ 12.269693] hardirqs last disabled at (67260): [<ffffff8008080e0c>] do_debug_exception+0x5c/0x178
[ 12.278820] softirqs last enabled at (67256): [<ffffff8008081664>] __do_softirq+0x4d4/0x520
[ 12.287510] softirqs last disabled at (67249): [<ffffff80080be574>] irq_exit+0xa8/0x100
[ 12.295742] ---[ end trace e63cfc40c313ffab ]---
The root of the problem is that the default segment size for sgt is
(UINT_MAX & PAGE_MASK), and the default segment size for device dma is
64K. As such, if you compare the 2, you would deduce that the sg segment
will overflow the device's capacity. In reality, the hardware can
accommodate the larger sg segments, it's just not initializing its max
segment properly. This patch initializes the max segment size for the
mdss device, which gets rid of that pesky warning.
Reported-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121111813.REPOST.1.I92c66a35fb13f368095b05287bdabdbe88ca6922@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c657b936ea98630ef5ba4f130ab1ad5c534d0165 upstream.
It's 25 Mhz (refclk / 4). This fixes the interpretation
of the rlc clock counter.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ec3d65082d7dabad6fa8f66a8ef166f2d522d6b2 ]
Per at least one tester this is enough magic to recover the regression
introduced for some people (but not all) in
commit b8e2b0199cc377617dc238f5106352c06dcd3fa2
Author: Peter Rosin <peda@axentia.se>
Date: Tue Jul 4 12:36:57 2017 +0200
drm/fb-helper: factor out pseudo-palette
which for radeon had the side-effect of refactoring out a seemingly
redudant writing of the color palette.
10ms in a fairly slow modeset path feels like an acceptable form of
duct-tape, so maybe worth a shot and see what sticks.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=198123
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e6176c6d286316e9431b4f695940cfac4ffe6c2 ]
The implementations for most channel types contains a map of methods to
priv registers in order to provide debugging info when a disp exception
has been raised.
This info is missing from the implementation of PIO channels as they're
rather simplistic already, however, if an exception is raised by one of
them, we'd end up triggering a NULL-pointer deref. Not ideal...
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206299
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 40efb09a7f53125719e49864da008495e39aaa1e ]
In vmw_cmdbuf_res_add if drm_ht_insert_item fails the allocated memory
for cres should be released.
Fixes: 18e4a4669c50 ("drm/vmwgfx: Fix compat shader namespace")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1eb013473bff5f95b6fe1ca4dd7deda47257b9c2 ]
Like other cases, it should use rcu protected 'chan' rather
than 'fence->channel' in nouveau_fence_wait_uevent_handler.
Fixes: 0ec5f02f0e2c ("drm/nouveau: prevent stale fence->channel pointers, and protect with rcu")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7adc77aa0e11f25b0e762859219c70852cd8d56f ]
Method init is typically ordered by class in the FW image as ThreeD,
TwoD, Compute.
Due to a bug in parsing the FW into our internal format, we've been
accidentally sending Twod + Compute methods to the ThreeD class, as
well as Compute methods to the TwoD class - oops.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3613a9bea95a1470dd42e4ed1cc7d86ebe0a2dc0 ]
We accidentally set "psb" which is a no-op instead of "*psb" so it
generates a static checker warning. We should probably set it before
the first error return so that it's always initialized.
Fixes: 923f1bd27bf1 ("drm/nouveau/secboot/gm20b: add secure boot support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 72a848f5c46bab4c921edc9cbffd1ab273b2be17 ]
userspace may transfer a newline, and this terminating newline
is replaced by a '\0' to avoid followup issues.
'len-1' is the index to replace the newline of CRC source name.
v3: typo fix (Sam)
v2: update patch subject, body and format. (Sam)
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610134751.14356-1-dingchen.zhang@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 411f5c1eacfebb1f6e40b653d29447cdfe7282aa ]
The driver currently handles vblank events only when updating planes on
an already enabled CRTC. The atomic update API however allows requesting
an event when enabling or disabling a CRTC. This currently leads to
event objects being leaked in the kernel and to events not being sent
out. Fix it.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
amdgpu_atombios_get_connector_info_from_object_table
[ Upstream commit bae028e3e521e8cb8caf2cc16a455ce4c55f2332 ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c: In function
'amdgpu_atombios_get_connector_info_from_object_table':
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:376:26: warning: variable
'grph_obj_num' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:376:13: warning: variable
'grph_obj_id' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:341:37: warning: variable
'con_obj_type' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c:341:24: warning: variable
'con_obj_num' set but not used [-Wunused-but-set-variable]
They are never used, so can be removed.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd1a5e521c3c083bb43ea731aae0f8b95f12b9bd ]
psbfb_probe performs an evaluation of the required size from the stolen
GTT memory, but gets it wrong in two distinct ways:
- The resulting size must be page-size-aligned;
- The size to allocate is derived from the surface dimensions, not the fb
dimensions.
When two connectors are connected with different modes, the smallest will
be stored in the fb dimensions, but the size that needs to be allocated must
match the largest (surface) dimensions. This is what is used in the actual
allocation code.
Fix this by correcting the evaluation to conform to the two points above.
It allows correctly switching to 16bpp when one connector is e.g. 1920x1080
and the other is 1024x768.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107153048.843881-1-paul.kocialkowski@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2c1fb9d86f6820abbfaa38a6836157c76ccb4e7b ]
Changing pixel clock source without having this clock source enabled
will block the timing engine and the next operations after (in this case
setting ATMEL_HLCDC_CFG(5) settings in atmel_hlcdc_crtc_mode_set_nofb()
will fail). It is recomended (although in datasheet this is not present)
to actually enabled pixel clock source before doing any changes on timing
enginge (only SAM9X60 datasheet specifies that the peripheral clock and
pixel clock must be enabled before using LCD controller).
Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: <stable@vger.kernel.org> # v4.0+
Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-3-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 62d91dd2851e8ae2ca552f1b090a3575a4edf759 ]
The INTERRUPT_CNTL2 register expects a valid DMA address, but is
currently set with a GPU MC address. This can cause problems on
systems that detect the resulting DMA read from an invalid address
(found on a Power8 guest).
Instead, use the DMA address of the dummy page because it will always
be safe.
Fixes: d8f60cfc9345 ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)")
Fixes: 25a857fbe973 ("drm/radeon/kms: add support for interrupts on SI")
Fixes: a59781bbe528 ("drm/radeon: add support for interrupts on CIK (v5)")
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 78e31c42261779a01bc73472d0f65f15378e9de3 ]
On msm8998, vblank timeouts are observed because the DSI controller is not
reset properly, which ends up stalling the MDP. This is because the reset
logic is not correct per the hardware documentation.
The documentation states that after asserting reset, software should wait
some time (no indication of how long), or poll the status register until it
returns 0 before deasserting reset.
wmb() is insufficient for this purpose since it just ensures ordering, not
timing between writes. Since asserting and deasserting reset occurs on the
same register, ordering is already guaranteed by the architecture, making
the wmb extraneous.
Since we would define a timeout for polling the status register to avoid a
possible infinite loop, lets just use a static delay of 20 ms, since 16.666
ms is the time available to process one frame at 60 fps.
Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support")
Cc: Hai Li <hali@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Sean Paul <sean@poorly.run>
[seanpaul renamed RESET_DELAY to DSI_RESET_TOGGLE_DELAY_MS]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011133939.16551-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f47bee2ba447bebc304111c16ef1e1a73a9744dd ]
These regs are write-only, and the hw throws a hissy-fit (ie. reboots)
when we try to read them for GPU state snapshot, in response to a GPU
hang. It is rather impolite when GPU recovery triggers an insta-
reboot, so lets remove the TPL1 registers from the snapshot.
Fixes: 7198e6b03155 drm/msm: add a3xx gpu support
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fc19cbb785d7bbd1a1af26229b5240a3ab332744 ]
If mdp5_cfg_init fails because of an unknown major version, a null pointer
dereference occurs. This is because the caller of init expects error
pointers, but init returns NULL on error. Fix this by returning the
expected values on error.
Fixes: 2e362e1772b8 (drm/msm/mdp5: introduce mdp5_cfg module)
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b1d03fc36ec9834465a08c275c8d563e07f6f6bf ]
Currently the uninitialized values in the array reply are printed out
when exec is false and nvkm_pmu_send has not updated the array. Avoid
confusion by only dumping out these values if they have been actually
updated.
Detected by CoverityScan, CID#1271291 ("Uninitialized scaler variable")
Fixes: ebb58dc2ef8c ("drm/nouveau/pmu: rename from pwr (no binary change)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 13649101a25c53c87f4ab98a076dfe61f3636ab1 ]
Currently, the expression for calculating RON is always going to result
in zero no matter the value of ram->mr[1] because the ! operator has
higher precedence than the shift >> operator. I believe the missing
parentheses around the expression before appying the ! operator will
result in the desired result.
[ Note, not tested ]
Detected by CoveritScan, CID#1324005 ("Operands don't affect result")
Fixes: c25bf7b6155c ("drm/nouveau/bios/ramcfg: Separate out RON pull value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9e05352340d3a3e68c144136db9810b26ebb88c3 ]
The etnaviv_gem_prime_get_sg_table() is supposed to return error
pointers. Otherwise it can lead to a NULL dereference when it's called
from drm_gem_map_dma_buf().
Fixes: 5f4a4a73f437 ("drm/etnaviv: fix gem_prime_get_sg_table to return new SG table")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8261c376e7f8cb9024af5a6c54be540c7f9108e ]
The etnaviv_gem_get_pages() never returns NULL. It returns error
pointers on error.
Fixes: a8c21a5451d8 ("drm/etnaviv: add initial etnaviv DRM driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 06c3bbd3c12737a50c2e981821b5585e1786e73d ]
In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Fixes: 8f1597c8f1a5 ("drm: shmobile: Perform initialization/cleanup at probe/remove time")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c54c7374ff44de5e609506aca7c0deae4703b6d1 ]
Jerry Zuo pointed out a rather obscure hotplugging issue that it seems I
accidentally introduced into DRM two years ago.
Pretend we have a topology like this:
|- DP-1: mst_primary
|- DP-4: active display
|- DP-5: disconnected
|- DP-6: active hub
|- DP-7: active display
|- DP-8: disconnected
|- DP-9: disconnected
If we unplug DP-6, the topology starting at DP-7 will be destroyed but
it's payloads will live on in DP-1's VCPI allocations and thus require
removal. However, this removal currently fails because
drm_dp_update_payload_part1() will (rightly so) try to validate the port
before accessing it, fail then abort. If we keep going, eventually we
run the MST hub out of bandwidth and all new allocations will start to
fail (or in my case; all new displays just start flickering a ton).
We could just teach drm_dp_update_payload_part1() not to drop the port
ref in this case, but then we also need to teach
drm_dp_destroy_payload_step1() to do the same thing, then hope no one
ever adds anything to the that requires a validated port reference in
drm_dp_destroy_connector_work(). Kind of sketchy.
So let's go with a more clever solution: any port that
drm_dp_destroy_connector_work() interacts with is guaranteed to still
exist in memory until we say so. While said port might not be valid we
don't really care: that's the whole reason we're destroying it in the
first place! So, teach drm_dp_get_validated_port_ref() to use the all
mighty current_work() function to avoid attempting to validate ports
from the context of mgr->destroy_connector_work. I can't see any
situation where this wouldn't be safe, and this avoids having to play
whack-a-mole in the future of trying to work around port validation.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 263efde31f97 ("drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()")
Reported-by: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113224613.28809-1-lyude@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1e0ff648940e603cab6c52cf3723017d30d78f30 ]
The is_double flag is a boolean currently assigned to the value of the d
variable, that is either 1 or 2. It means that this is_double variable is
always set to true, even though the initial intent was to have it set to
true when d is 2.
Fix this.
Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181021163446.29135-2-maxime.ripard@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ff9f49646353ce31312411e7e7bd2281492a40e ]
Currently the driver overwrites the surface depth provided by the fb
helper to give an invalid bpp/surface depth combination.
This has been exposed by commit 70109354fed2 ("drm: Reject unknown legacy
bpp and depth for drm_mode_addfb ioctl"), which now causes the driver to
fail to probe.
Fix by not overwriting the surface depth.
Fixes: d1667b86795a ("drm/hisilicon/hibmc: Add support for frame buffer")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09c4b49457434fa74749ad6194ef28464d9f5df9 ]
This doesn't affect runtime because in the current code "idx" is always
valid.
First, we read from "vgdev->capsets[idx].max_size" before checking
whether "idx" is within bounds. And secondly the bounds check is off by
one so we could end up reading one element beyond the end of the
vgdev->capsets[] array.
Fixes: 62fb7a5e1096 ("virtio-gpu: add 3d/virgl support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180704094250.m7sgvvzg3dhcvv3h@kili.mountain
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 66e31a72dc38543b2d9d1ce267dc78ba9beebcfd ]
Removing the drm_bridge_remove call should avoid a NULL dereference
during list processing in drm_bridge_remove if the error path is ever
taken.
The more natural approach would perhaps be to add a drm_bridge_add,
but there are several other bridges that never call drm_bridge_add.
Just removing the drm_bridge_remove is the easier fix.
Fixes: 84601dbdea36 ("drm: sti: rework init sequence")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806061910.29914-2-peda@axentia.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This patch is a simplified fix to address a use-after-free in 4.14.x and
4.19.x stable kernels. The flaw is already fixed upstream, starting in
5.2, by commit 7dc40713618c ("drm/i915: Introduce a mutex for
file_priv->context_idr") as part of a more complex patch series that
isn't appropriate for backporting to stable kernels.
Expand mutex coverage, while destroying the GEM context, to include the
GEM context lookup step. This fixes a use-after-free detected by KASAN:
==================================================================
BUG: KASAN: use-after-free in i915_ppgtt_close+0x2ca/0x2f0
Write of size 1 at addr ffff8881368a8368 by task i915-poc/3124
CPU: 0 PID: 3124 Comm: i915-poc Not tainted 4.14.164 #1
Hardware name: HP HP Elite x2 1012 G1 /80FC, BIOS N85 Ver. 01.20 04/05/2017
Call Trace:
dump_stack+0xcd/0x12e
? _atomic_dec_and_lock+0x1b2/0x1b2
? i915_ppgtt_close+0x2ca/0x2f0
? printk+0x8f/0xab
? show_regs_print_info+0x53/0x53
? i915_ppgtt_close+0x2ca/0x2f0
print_address_description+0x65/0x270
? i915_ppgtt_close+0x2ca/0x2f0
kasan_report+0x251/0x340
i915_ppgtt_close+0x2ca/0x2f0
? __radix_tree_insert+0x3f0/0x3f0
? i915_ppgtt_init_hw+0x7c0/0x7c0
context_close+0x42e/0x680
? i915_gem_context_release+0x230/0x230
? kasan_kmalloc+0xa0/0xd0
? radix_tree_delete_item+0x1d4/0x250
? radix_tree_lookup+0x10/0x10
? inet_recvmsg+0x4b0/0x4b0
? kasan_slab_free+0x88/0xc0
i915_gem_context_destroy_ioctl+0x236/0x300
? i915_gem_context_create_ioctl+0x360/0x360
? drm_dev_printk+0x1d0/0x1d0
? memcpy+0x34/0x50
? i915_gem_context_create_ioctl+0x360/0x360
drm_ioctl_kernel+0x1b0/0x2b0
? drm_ioctl_permit+0x2a0/0x2a0
? avc_ss_reset+0xd0/0xd0
drm_ioctl+0x6fe/0xa20
? i915_gem_context_create_ioctl+0x360/0x360
? drm_getstats+0x20/0x20
? put_unused_fd+0x260/0x260
do_vfs_ioctl+0x189/0x12d0
? ioctl_preallocate+0x280/0x280
? selinux_file_ioctl+0x3a7/0x680
? selinux_bprm_set_creds+0xe30/0xe30
? security_file_ioctl+0x69/0xa0
? selinux_bprm_set_creds+0xe30/0xe30
SyS_ioctl+0x6f/0x80
? __sys_sendmmsg+0x4a0/0x4a0
? do_vfs_ioctl+0x12d0/0x12d0
do_syscall_64+0x214/0x5f0
? __switch_to_asm+0x31/0x60
? __switch_to_asm+0x25/0x60
? __switch_to_asm+0x31/0x60
? syscall_return_slowpath+0x2c0/0x2c0
? copy_overflow+0x20/0x20
? __switch_to_asm+0x25/0x60
? syscall_return_via_sysret+0x2a/0x7a
? prepare_exit_to_usermode+0x200/0x200
? __switch_to_asm+0x31/0x60
? __switch_to_asm+0x31/0x60
? __switch_to_asm+0x25/0x60
? __switch_to_asm+0x25/0x60
? __switch_to_asm+0x31/0x60
? __switch_to_asm+0x25/0x60
? __switch_to_asm+0x31/0x60
? __switch_to_asm+0x31/0x60
? __switch_to_asm+0x25/0x60
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7f7fda5115d7
RSP: 002b:00007f7eec317ec8 EFLAGS: 00000286 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7fda5115d7
RDX: 000055b306db9188 RSI: 000000004008646e RDI: 0000000000000003
RBP: 00007f7eec317ef0 R08: 00007f7eec318700 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000286 R12: 00007f7eec317fc0
R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffd8007ade0
Allocated by task 2898:
save_stack+0x32/0xb0
kasan_kmalloc+0xa0/0xd0
kmem_cache_alloc_trace+0x5e/0x180
i915_ppgtt_create+0xab/0x2510
i915_gem_create_context+0x981/0xf90
i915_gem_context_create_ioctl+0x1d7/0x360
drm_ioctl_kernel+0x1b0/0x2b0
drm_ioctl+0x6fe/0xa20
do_vfs_ioctl+0x189/0x12d0
SyS_ioctl+0x6f/0x80
do_syscall_64+0x214/0x5f0
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Freed by task 104:
save_stack+0x32/0xb0
kasan_slab_free+0x72/0xc0
kfree+0x88/0x190
i915_ppgtt_release+0x24e/0x460
i915_gem_context_free+0x90/0x480
contexts_free_worker+0x54/0x80
process_one_work+0x876/0x14e0
worker_thread+0x1b8/0xfd0
kthread+0x2f8/0x3c0
ret_from_fork+0x35/0x40
The buggy address belongs to the object at ffff8881368a8000
which belongs to the cache kmalloc-8192 of size 8192
The buggy address is located 872 bytes inside of
8192-byte region [ffff8881368a8000, ffff8881368aa000)
The buggy address belongs to the page:
page:ffffea0004da2a00 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x200000000008100(slab|head)
raw: 0200000000008100 0000000000000000 0000000000000000 0000000100030003
raw: dead000000000100 dead000000000200 ffff88822a002280 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881368a8200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881368a8280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881368a8300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881368a8380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881368a8400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: 1acfc104cdf8 ("drm/i915: Enable rcu-only context lookups")
Reported-by: 罗权 <luoquan@qianxin.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: stable@vger.kernel.org # 4.14.x
Cc: stable@vger.kernel.org # 4.19.x
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bc8a76a152c5f9ef3b48104154a65a68a8b76946 upstream.
Intel ID: PSIRT-TA-201910-001
CVEID: CVE-2019-14615
Intel GPU Hardware prior to Gen11 does not clear EU state
during a context switch. This can result in information
leakage between contexts.
For Gen8 and Gen9, hardware provides a mechanism for
fast cleardown of the EU state, by issuing a PIPE_CONTROL
with bit 27 set. We can use this in a context batch buffer
to explicitly cleardown the state on every context switch.
As this workaround is already in place for gen8, we can borrow
the code verbatim for Gen9.
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Kumar Valsan Prathap <prathap.kumar.valsan@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Balestrieri Francesco <francesco.balestrieri@intel.com>
Cc: Bloomfield Jon <jon.bloomfield@intel.com>
Cc: Dutt Sudeep <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c4e4fccc5d52d881afaac11d3353265ef4eccb8b upstream.
[Why]
According to DP spec, it should shift left 4 digits for NO_STOP_BIT
in REMOTE_I2C_READ message. Not 5 digits.
In current code, NO_STOP_BIT is always set to zero which means I2C
master is always generating a I2C stop at the end of each I2C write
transaction while handling REMOTE_I2C_READ sideband message. This issue
might have the generated I2C signal not meeting the requirement. Take
random read in I2C for instance, I2C master should generate a repeat
start to start to read data after writing the read address. This issue
will cause the I2C master to generate a stop-start rather than a
re-start which is not expected in I2C random read.
[How]
Correct the shifting value of NO_STOP_BIT for DP_REMOTE_I2C_READ case in
drm_dp_encode_sideband_req().
Changes since v1:(https://patchwork.kernel.org/patch/11312667/)
* Add more descriptions in commit and cc to stable
Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200103055001.10287-1-Wayne.Lin@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f30e27779d3031a092c2a177b7fb76adccc45241 upstream.
When userspace requests a video mode parameter value that is not
supported, frame buffer device drivers should round it up to a supported
value, if possible, instead of just rejecting it. This allows
applications to quickly scan for supported video modes.
Currently this rule is not followed for the number of bits per pixel,
causing e.g. "fbset -depth N" to fail, if N is smaller than the current
number of bits per pixel.
Fix this by returning an error only if bits per pixel is too large, and
setting it to the current value otherwise.
See also Documentation/fb/framebuffer.rst, Section 2 (Programmer's View
of /dev/fb*").
Fixes: 865afb11949e5bf4 ("drm/fb-helper: reject any changes to the fbdev")
Cc: stable@vger.kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191230132734.4538-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d8fd3722207f154b53c80eee2cf4977c3fc25a92 ]
Fix the breakage resulting in the stacktrace below, due to tx queue
being full when trying to send an up-reply. txmsg->seqno is -1 in this
case leading to a corruption of the mstb object by
txmsg->dst->tx_slots[txmsg->seqno] = NULL;
in process_single_up_tx_qlock().
[ +0,005162] [drm:process_single_tx_qlock [drm_kms_helper]] set_hdr_from_dst_qlock: failed to find slot
[ +0,000015] [drm:drm_dp_send_up_ack_reply.constprop.19 [drm_kms_helper]] failed to send msg in q -11
[ +0,000939] BUG: kernel NULL pointer dereference, address: 00000000000005a0
[ +0,006982] #PF: supervisor write access in kernel mode
[ +0,005223] #PF: error_code(0x0002) - not-present page
[ +0,005135] PGD 0 P4D 0
[ +0,002581] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ +0,004359] CPU: 1 PID: 1200 Comm: kworker/u16:3 Tainted: G U 5.2.0-rc1+ #410
[ +0,008433] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP, BIOS ICLSFWR1.R00.3175.A00.1904261428 04/26/2019
[ +0,013323] Workqueue: i915-dp i915_digport_work_func [i915]
[ +0,005676] RIP: 0010:queue_work_on+0x19/0x70
[ +0,004372] Code: ff ff ff 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 41 56 49 89 f6 41 55 41 89 fd 41 54 55 53 48 89 d3 9c 5d fa e8 e7 81 0c 00 <f0> 48 0f ba 2b 00 73 31 45 31 e4 f7 c5 00 02 00 00 74 13 e8 cf 7f
[ +0,018750] RSP: 0018:ffffc900007dfc50 EFLAGS: 00010006
[ +0,005222] RAX: 0000000000000046 RBX: 00000000000005a0 RCX: 0000000000000001
[ +0,007133] RDX: 000000000001b608 RSI: 0000000000000000 RDI: ffffffff82121972
[ +0,007129] RBP: 0000000000000202 R08: 0000000000000000 R09: 0000000000000001
[ +0,007129] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88847bfa5096
[ +0,007131] R13: 0000000000000010 R14: ffff88849c08f3f8 R15: 0000000000000000
[ +0,007128] FS: 0000000000000000(0000) GS:ffff88849dc80000(0000) knlGS:0000000000000000
[ +0,008083] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0,005749] CR2: 00000000000005a0 CR3: 0000000005210006 CR4: 0000000000760ee0
[ +0,007128] PKRU: 55555554
[ +0,002722] Call Trace:
[ +0,002458] drm_dp_mst_handle_up_req+0x517/0x540 [drm_kms_helper]
[ +0,006197] ? drm_dp_mst_hpd_irq+0x5b/0x9c0 [drm_kms_helper]
[ +0,005764] drm_dp_mst_hpd_irq+0x5b/0x9c0 [drm_kms_helper]
[ +0,005623] ? intel_dp_hpd_pulse+0x205/0x370 [i915]
[ +0,005018] intel_dp_hpd_pulse+0x205/0x370 [i915]
[ +0,004836] i915_digport_work_func+0xbb/0x140 [i915]
[ +0,005108] process_one_work+0x245/0x610
[ +0,004027] worker_thread+0x37/0x380
[ +0,003684] ? process_one_work+0x610/0x610
[ +0,004184] kthread+0x119/0x130
[ +0,003240] ? kthread_park+0x80/0x80
[ +0,003668] ret_from_fork+0x24/0x50
Cc: Lyude Paul <lyude@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523212433.9058-1-imre.deak@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 57177d214ee0816c4436c23d6c933ccb32c571f1 upstream.
When the HDMI unbinds drm_connector_cleanup() and drm_encoder_cleanup()
are called. This also happens when the connector and the encoder are
destroyed. This double call triggers a NULL pointer exception.
The patch fixes this by removing the cleanup calls in the unbind
function.
Cc: <stable@vger.kernel.org>
Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217124632.20820-1-stefan@olimex.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5bf8bec3f4ce044a223c40cbce92590d938f0e9c ]
The hardened usercpy code is too paranoid ever since commit 6a30afa8c1fb
("uaccess: disallow > INT_MAX copy sizes")
Code itself should have been fine as-is.
Link: http://lkml.kernel.org/r/20191106164755.31478-1-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reported-by: syzbot+fb77e97ebf0612ee6914@syzkaller.appspotmail.com
Fixes: 6a30afa8c1fb ("uaccess: disallow > INT_MAX copy sizes")
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 37a68eab4cd92b507c9e8afd760fdc18e4fecac6 ]
Place the declaration of struct nouveau_conn_atom above that of
struct nouveau_connector. This commit makes no changes to the moved
block what so ever, it just moves it up a bit.
This is a preparation patch to fix some issues with connector handling
on pre nv50 displays (which do not use atomic modesetting).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 946ab8db6953535a3a88c957db8328beacdfed9d ]
The object fence is not set to NULL after its reference is dropped. As a
result, its reference may be dropped again if error occurs after that,
which may lead to a use after free bug. To avoid the issue, fence is
explicitly set to NULL after dropping its reference.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ec3b7b6eb8c90b52f61adff11b6db7a8db34de19 ]
"clock" may be copied to "best_clock". Initializing best_clock
is not sufficient. The fix initializes clock as well to avoid
memory disclosures and informaiton leaks.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018044150.1899-1-kjlu@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fadfee3f9d8f114435a8a3e9f83a227600d89de7 ]
When setting a new display mode, dw_hdmi_setup() calls
dw_hdmi_enable_video_path(), which disables all hdmi clocks, including
the audio clock.
We should only (re-)enable the audio clock if audio was already enabled
when setting the new mode.
Without this patch, on RK3288, there will be HDMI audio on some monitors
if i2s was played to headphone when the monitor was plugged.
ACER H277HU and ASUS PB278 are two of the monitors showing this issue.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008102145.55134-1-cychiang@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bee447e224b2645911c5d06e35dc90d8433fcef6 ]
The DDC/CI protocol involves sending a multi-byte request to the
display via I2C, which is typically followed by a multi-byte
response. The internal I2C controller only allows single byte
reads/writes or reads of 8 sequential bytes, hence DDC/CI is not
supported when the internal I2C controller is used. The I2C
transfers complete without errors, however the data in the response
is garbage. Abort transfers to/from slave address 0x37 (DDC) with
-EOPNOTSUPP, to make it evident that the communication is failing.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002124354.v2.1.I709dfec496f5f0b44a7b61dcd4937924da8d8382@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2708e876272d89bbbff811d12834adbeef85f022 ]
Silence two warning messages that occur due to -EPROBE_DEFER errors to
help cleanup the system boot log.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-4-masneyb@onstation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 008037d4d972c9c47b273e40e52ae34f9d9e33e7 upstream.
Shift and mask were reversed. Noticed by chance.
Tested-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|