aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/radeon/rs600.c
AgeCommit message (Collapse)Author
2011-12-01drm/radeon/kms: add some loop timeouts in pageflip codeAlex Deucher
Avoid infinite loops waiting for surface updates if a GPU reset happens while waiting for a page flip. See: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Tested-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-04drm/radeon/kms: consolidate GART code, fix segfault after GPU lockup V2Jerome Glisse
After GPU lockup VRAM gart table is unpinned and thus its pointer becomes unvalid. This patch move the unpin code to a common helper function and set pointer to NULL so that page update code can check if it should update GPU page table or not. That way bo still bound to GART can be unbound (pci_unmap_page for all there page) properly while there is no need to update the GPU page table. V2 move the test for null gart out of the loop, small optimization Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-03drm/radeon/kms: set HPD polarity in hpd_init()Alex Deucher
Polarity needs to be set accordingly to connector status (connected or disconnected). Set it up in hpd_init() so first hotplug works reliably no matter what is the initial set of connector. hpd_init() also covers resume so HPD will work correctly after resume as well. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jerome Glisse <j.glisse@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-06drm/radeon: Print gart initialization details on all chipsetsTormod Volden
This was previously done for r300 only. Use %016llX instead of %08X for printing the table address. Also fix typos in gart warning messages. Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-26Merge branch 'drm-core-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (135 commits) drm/radeon/kms: fix DP training for DPEncoderService revision bigger than 1.1 drm/radeon/kms: add missing vddci setting on NI+ drm/radeon: Add a rmb() in IH processing drm/radeon: ATOM Endian fix for atombios_crtc_program_pll() drm/radeon: Fix the definition of RADEON_BUF_SWAP_32BIT drm/radeon: Do an MMIO read on interrupts when not uisng MSIs drm/radeon: Writeback endian fixes drm/radeon: Remove a bunch of useless _iomem casts drm/gem: add support for private objects DRM: clean up and document parsing of video= parameter DRM: Radeon: Fix section mismatch. drm: really make debug levels match in edid failure code drm/radeon/kms: fix i2c map for rv250/280 drm/nouveau/gr: disable fifo access and idle before suspend ctx unload drm/nouveau: pass flag to engine fini() method on suspend drm/nouveau: replace nv04_graph_fifo_access() use with direct reg bashing drm/nv40/gr: rewrite/split context takedown functions drm/nouveau: detect disabled device in irq handler and return IRQ_NONE drm/nouveau: ignore connector type when deciding digital/analog on DVI-I drm/nouveau: Add a quirk for Gigabyte NX86T ...
2011-07-25drm/radeon: Remove a bunch of useless _iomem castsBenjamin Herrenschmidt
Just defining rdev->rmmio properly in the first place should do the trick. In some cases, the cast were also complete dups as the original variable was already of the right type. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-12drm/radeon/kms: use correct BUS_CNTL reg on rs600Alex Deucher
BUS_CNTL is at 0x30 on rs600, not 0x4c. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-13drm/radeon/kms: add voltage type to atom set voltage functionAlex Deucher
This is needed for setting voltages other than vddc. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-04drm/radeon/kms: pageflipping cleanup for avivo+Alex Deucher
Avoid touching the flip setup regs while acceleration is running. Set them at modeset rather than during pageflip. Touching these regs while acceleration is active caused hangs on pre-avivo chips. These chips do not seem to be affected, but better safe than sorry, plus it avoids repeatedly reprogramming the regs every flip. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits) doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore Update cpuset info & webiste for cgroups dcdbas: force SMI to happen when expected arch/arm/Kconfig: remove one to many l's in the word. asm-generic/user.h: Fix spelling in comment drm: fix printk typo 'sracth' Remove one to many n's in a word Documentation/filesystems/romfs.txt: fixing link to genromfs drivers:scsi Change printk typo initate -> initiate serial, pch uart: Remove duplicate inclusion of linux/pci.h header fs/eventpoll.c: fix spelling mm: Fix out-of-date comments which refers non-existent functions drm: Fix printk typo 'failled' coh901318.c: Change initate to initiate. mbox-db5500.c Change initate to initiate. edac: correct i82975x error-info reported edac: correct i82975x mci initialisation edac: correct commented info fs: update comments to point correct document target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c ... Trivial conflict in fs/eventpoll.c (spelling vs addition)
2011-03-14drm/radeon: fix problem with changing active VRAM size. (v2)Dave Airlie
So we used to use lpfn directly to restrict VRAM when we couldn't access the unmappable area, however this was removed in 93225b0d7bc030f4a93165347a65893685822d70 as it also restricted the gtt placements. However it was only later noticed that this broke on some hw. This removes the active_vram_size, and just explicitly sets it when it changes, TTM/drm_mm will always use the real_vram_size, and the active vram size will change the TTM size used for lpfn setting. We should re-work the fpfn/lpfn to per-placement at some point I suspect, but that is too late for this kernel. Hopefully this addresses: https://bugs.freedesktop.org/show_bug.cgi?id=35254 v2: fix reported useful VRAM size to userspace to be correct. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-17drm: Fix printk typo 'failled'Paul Bolle
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-17drm/radeon/kms: balance asic_reset functionsAlex Deucher
First, we were calling mc_stop() at the top of the function which turns off all MC (memory controller) clients, then checking if the GPU is idle. If it was idle we returned without re-enabling the MC clients which would lead to a blank screen, etc. This patch checks if the GPU is idle before calling mc_stop(). Second, if the reset failed, we were returning without re-enabling the MC clients. This patch re-enables the MC clients before returning regardless of whether the reset was successful or not. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06drm/radeon: use system_wq instead of dev_priv->wqTejun Heo
With cmwq, there's no reason for radeon to use a dedicated workqueue. Drop dev_priv->wq and use system_wq instead. Because radeon_driver_irq_uninstall_kms() may be called from unsleepable context, the work items can't be flushed from there. Instead, init and flush from radeon_irq_kms_init/fini(). While at it, simplify canceling/flushing of rdev->pm.dynpm_idle_work. Always initialize and sync cancel instead of being unnecessarily smart about it. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Alex Deucher <alexdeucher@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22drm/kms/radeon: Reorder vblank and pageflip interrupt handling.Mario Kleiner
In the vblank irq handler, calls to actual vblank handling, or at least drm_handle_vblank(), need to happen before calls to radeon_crtc_handle_flip(). Reason: The high precision pageflip timestamping and some other pageflip optimizations will need the updated vblank count and timestamps for the current vblank interval. These are calculated in drm_handle_vblank(), therefore it must go first. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22drm/radeon/kms: add pageflip ioctl support (v3)Alex Deucher
This adds support for dri2 pageflipping. v2: precision updates from Mario Kleiner. v3: Multihead fixes from Mario Kleiner; missing crtc offset add note about update pending bit on pre-avivo chips Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drivers/gpu/drm: Update WARN usesJoe Perches
Coalesce long formats. Align arguments. Add missing newlines. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-19Merge branch 'drm-fixes' of /home/airlied/kernel/linux-2.6 into drm-core-nextDave Airlie
Conflicts: drivers/gpu/drm/i915/intel_fb.c drivers/gpu/drm/radeon/r600_blit_kms.c drivers/gpu/drm/ttm/ttm_bo.c
2010-10-12drm/radeon/kms: avoid corner case issue with unmappable vram V2Jerome Glisse
We should not allocate any object into unmappable vram if we have no means to access them which on all GPU means having the CP running and on newer GPU having the blit utility working. This patch limit the vram allocation to visible vram until we have acceleration up and running. Note that it's more than unlikely that we run into any issue related to that as when acceleration is not woring userspace should allocate any object in vram beside front buffer which should fit in visible vram. V2 use real_vram_size as mc_vram_size could be bigger than the actual amount of vram [airlied: fixup r700_cp_stop case] Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon/kms: enable writeback (v2)Alex Deucher
When writeback is enabled, the GPU shadows writes to certain registers into a buffer in memory. The driver can then read the values from the shadow rather than reading back from the register across the bus. Writeback can be disabled by setting the no_wb module param to 1. On r6xx/r7xx/evergreen, the following registers are shadowed: - CP scratch registers - CP read pointer - IH write pointer On r1xx-rr5xx, the following registers are shadowed: - CP scratch registers - CP read pointer v2: - Combine wb patches for r6xx-evergreen and r1xx-r5xx - Writeback is disabled on AGP boards since it tends to be unreliable on AGP using the gart. - Check radeon_wb_init return values properly. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-04drm/radeon/kms/igp: sideport is AMD onlyAlex Deucher
Intel variants don't support it. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02Merge tag 'v2.6.35-rc6' into drm-radeon-nextDave Airlie
Need this to avoid conflicts with future radeon fixes
2010-08-02drm/radeon/kms: check/restore sanity before doing anything else with GPU.Dave Airlie
On systems using kexec, the new kernel is booted straight from the old kernel, without any warning to the graphics driver. So the GPU is basically left as-is in a running state, however the CPU side is completly reset. Without stating the saneness of anyone using kexec on live systems, we should at least try not to crash the GPU. This patch resets 3 registers to 0 that could cause bad things to happen to the running system. This allows kexec to work on a Power6/RN50 system. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms: enable HDMI audio on RS600/RS690/RS740Rafał Miłecki
We will need method of selecting encoder that should receive HDMI block. For now we assign HDMI block to first enabled encoder. Hopefully there are not many RS6x0 chips with two digital encoders. [airlied: add RS740 checks as per Alex suggestion.] Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-16drm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asicsAlex Deucher
The asics in question have the following requirements with regard to their gart setups: 1. The GART aperture size has to be in the form of 2^X bytes, where X is from 25 to 31 2. The GART aperture MC base has to be aligned to a boundary equal to the size of the aperture. 3. The GART page table has to be aligned to the boundary equal to the size of the table. 4. The GART page table size is: table_entry_size * (aperture_size / page_size) 5. The GART page table has to be allocated in non-paged, non-cached, contiguous system memory. This patch takes care 2. The rest should already be handled properly. This fixes a regression noticed by: Torsten Kaiser <just.for.lkml@googlemail.com> Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-07Merge branch 'drm-platform' into drm-testingDave Airlie
* drm-platform: drm: Make sure the DRM offset matches the CPU drm: Add __arm defines to DRM drm: Add support for platform devices to register as DRM devices drm: Remove drm_resource wrappers
2010-06-03drm/radeon/kms/pm: add support for SetVoltage cmd table (V2)Alex Deucher
- This enables voltage adjustment on r6xx+ and certain r5xx asics. - Voltage drop support is already available for most r1xx-r5xx asics. V2: endian fix for voltage table. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01drm: Remove drm_resource wrappersJordan Crouse
Remove the drm_resource wrappers and directly use the actual PCI and/or platform functions in their place. [airlied: fixup nouveau properly to build] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms/pm: make pm spam debug onlyAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms/pm: rework power managementAlex Deucher
- Separate dynpm and profile based power management methods. You can select the pm method by echoing the selected method ("dynpm" or "profile") to power_method in sysfs. - Expose basic 4 profile in profile method "default" - default clocks "auto" - select between low and high based on ac/dc state "low" - DC, low power mode "high" - AC, performance mode The current base profile is "default", but it should switched to "auto" once we've tested on more systems. Switching the state is a matter of echoing the requested profile to power_profile in sysfs. The lowest power states are selected automatically when dpms turns the monitors off in all states but default. - Remove dynamic fence-based reclocking for the moment. We can revisit this later once we have basic pm in. - Move pm init/fini to modesetting path. pm is tightly coupled with display state. Make sure display side is initialized before pm. - Add pm suspend/resume functions to make sure pm state is properly reinitialized on resume. - Remove dynpm module option. It's now selectable via sysfs. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms: enable misc pm power state features on r5xx, rs6xxAlex Deucher
voltage drop, dynamic voltage, dynamic sclk, pcie lane adjust, etc, Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms/pm: add additional asic callbacksAlex Deucher
- pm_misc() - handles voltage, pcie lanes, and other non clock related power mode settings. Currently disabled. Needs further debugging - pm_prepare() - disables crtc mem requests right now. All memory clients need to be disabled when changing memory clocks. This function can be expanded to include disabling fb access as well. - pm_finish() - enable active memory clients. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms: add support for gui idle interrupts (v4)Alex Deucher
Useful for certain power management operations. You need to wait for the GUI engine (2D, 3D, CP, etc.) to be idle before changing clocks or adjusting engine parameters. (v2) Fix gui idle enable on pre-r6xx asics (v3) The gui idle interrrupt status bit is permanently asserted on pre-r6xx chips, but the interrrupt is still generated. workaround it in the driver. (v4) Add support for evergreen Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20Merge branch 'drm-radeon-lockup' into drm-core-nextDave Airlie
* drm-radeon-lockup: drm/radeon/kms: simplify & improve GPU reset V2 drm/radeon/kms: rename gpu_reset to asic_reset drm/radeon/kms: fence cleanup + more reliable GPU lockup detection V4 Conflicts: drivers/gpu/drm/radeon/r300.c
2010-04-19drm/radeon/kms: fix rs600 tlb flushJerome Glisse
Typo in in flush leaded to no flush of the RS600 tlb which ultimately leaded to massive system ram corruption, with this patch everythings seems to work properly. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06drm/radeon/kms: simplify & improve GPU reset V2Jerome Glisse
This simplify and improve GPU reset for R1XX-R6XX hw, it's not 100% reliable here are result: - R1XX/R2XX works bunch of time in a row, sometimes it seems it can work indifinitly - R3XX/R3XX the most unreliable one, sometimes you will be able to reset few times, sometimes not even once - R5XX more reliable than previous hw, seems to work most of the times but once in a while it fails for no obvious reasons (same status than previous reset just no same happy ending) - R6XX/R7XX are lot more reliable with this patch, still it seems that it can fail after a bunch (reset every 2sec for 3hour bring down the GPU & computer) This have been tested on various hw, for some odd reasons i wasn't able to lockup RS480/RS690 (while they use to love locking up). Note that on R1XX-R5XX the cursor will disapear after lockup haven't checked why, switch to console and back to X will restore cursor. Next step is to record the bogus command that leaded to the lockup. V2 Fix r6xx resume path to avoid reinitializing blit module, use the gpu_lockup boolean to avoid entering inifinite waiting loop on fence while reiniting the GPU Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06drm/radeon/kms: rename gpu_reset to asic_resetJerome Glisse
Patch rename gpu_reset to asic_reset in prevision of having gpu_reset doing more stuff than just basic asic reset. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-31drm/radeon/kms: display watermark updates (v2)Alex Deucher
- Add module option to force the display priority 0 = auto, 1 = normal, 2 = high - Default to high on r3xx/r4xx/rv515 chips Fixes flickering problems during heavy acceleration due to underflow to the display controllers - Fill in minimal support for RS600 v2 - update display priority when bandwidth is updated so the user can change the parameter at runtime and it will take affect on the next modeset. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-31drm/radeon/kms: avoid possible oops (call gart_fini before gart_disable)Jerome Glisse
radeon_gart_fini might call GART unbind callback function which might try to access GART table but if gart_disable is call first the GART table will be unmapped so any access to it will oops. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-31drm/radeon/kms: display watermark fixesAlex Deucher
- rs780/880 were using the wrong bandwidth functions - convert r1xx-r4xx to use the same pm sclk/mclk structs as r5xx+ - move bandwidth setup to a common function Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-31drm/radeon/kms: expose thermal/fan i2c busesAlex Deucher
Look up i2c bus in the power table and expose it. You'll need to load a hwmon driver for any chips on the bus, this patch just exposes the bus. Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
2010-03-15drm/radeon: include radeon_asic.h in the asic specific filesDaniel Vetter
In essence this creates a home for all asic specific declarations in radeon_asic.h Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: switch to condition waiting for reclockingRafał Miłecki
We tried to implement interruptible waiting with timeout (it was broken anyway) which was not a good idea as explained by Andrew. It's possible to avoid using additional variable but actually it inroduces using more complex in-kernel tools. So simply add one variable for condition. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-25drm/radeon/kms: force pinning buffer into visible VRAMJerome Glisse
This patch properly set visible VRAM and enforce any pinned buffer to be into visible VRAM. We might later add a flag to release this constraint for some newer hw more clever than previous. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-18drm/radeon/kms: simplify memory controller setup V2Jerome Glisse
Get rid of _location and use _start/_end also simplify the computation of vram_start|end & gtt_start|end. For R1XX-R2XX we place VRAM at the same address of PCI aperture, those GPU shouldn't have much memory and seems to behave better when setup that way. For R3XX and newer we place VRAM at 0. For R6XX-R7XX AGP we place VRAM before or after AGP aperture this might limit to limit the VRAM size but it's very unlikely. For IGP we don't change the VRAM placement. Tested on (compiz,quake3,suspend/resume): PCI/PCIE:RV280,R420,RV515,RV570,RV610,RV710 AGP:RV100,RV280,R420,RV350,RV620(RPB*),RV730 IGP:RS480(RPB*),RS690,RS780(RPB*),RS880 RPB: resume previously broken V2 correct commit message to reflect more accurately the bug and move VRAM placement to 0 for most of the GPU to avoid limiting VRAM. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-11drm/radeon/kms: set gart pages to invalid on unbind and point to dummy pageDave Airlie
this uses a new entrypoint to invalidate gart entries instead of using 0. Changed to rather than pointing to 0 address point empty entry to dummy page. This might help to avoid hard lockup if for some wrong reasons GPU try to access unmapped GART entry. I'm not 100% sure this is going to work, we probably need to allocate a dummy page and point all the GTT entries at it similiar to what AGP does. but we can test this first I suppose. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-09drm/radeon/kms: use wait queue (events) for VBLANK syncRafał Miłecki
This already simplifies code significally and makes it maintaible in case of adding memory reclocking plus voltage changing in future. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-09drm/radeon/kms: add dynamic engine reclocking (V9)Rafał Miłecki
V2: reorganize functions, fix modesetting calls V3: rebase patch, use radeon's workqueue V4: enable on tested chipsets only, request VBLANK IRQs V5: enable PM on older hardware (IRQs, mode_fixup, dpms) V6: use separate dynpm module parameter V7: drop RADEON_ prefix, set minimum mode for dpms off V8: update legacy encoder call, fix order in rs600 IRQ V9: update compute_clocks call in legacy, not only DPMS_OFF Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-05drm/radeon/kms: don't call suspend path before cleaning up GPUJerome Glisse
In suspend path we unmap the GART table while in cleaning up path we will unbind buffer and thus try to write to unmapped GART leading to oops. In order to avoid this we don't call the suspend path in cleanup path. Cleanup path is clever enough to desactive GPU like the suspend path is doing, thus this was redondant. Tested on: RV370, R420, RV515, RV570, RV610, RV770 (all PCIE) Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08drm/radeon/kms: Don't try to enable IRQ if we have no handler installedJerome Glisse
If for any reason we haven't installed handler we shouldn't try to enable IRQ/MSI on the hw so we don't get unhandled IRQ/MSI which makes the kernel sad. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>