| Age | Commit message (Collapse) | Author |
|---|
|
rmk requested this for armada and I think we've had a few
conflicts build up.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
changed gvt display transcode DDI mode from DP_SST to
DVI to address below calltrace issue during guest booting
up which is caused by zero dotclock initial value with DP_SST
mode. transcode DVI mode emulation also align with native with DP
connection.
[drm:drm_calc_timestamping_constants]
ERROR crtc 41: Can't calculate constants, dotclock = 0!
WARNING: at drivers/gpu/drm/drm_vblank.c:620
drm_calc_vbltimestamp_from_scanoutpos
Call Trace:
? drm_calc_timestamping_constants+0x144/0x150 [drm]
drm_get_last_vbltimestamp+0x54/0x90 [drm]
drm_reset_vblank_timestamp+0x59/0xd0 [drm]
drm_crtc_vblank_on+0x7b/0xd0 [drm]
intel_modeset_setup_hw_state+0xb67/0xfd0 [i915]
? gen2_read32+0x110/0x110 [i915]
? drm_modeset_lock+0x30/0xa0 [drm]
intel_modeset_init+0x794/0x19d0 [i915]
? intel_setup_gmbus+0x232/0x2e0 [i915]
i915_driver_load+0xb4a/0xf40 [i915]
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Virtual monitor on BXT start from port B.
Unlike SKL/KBL, digital display port connectivity is detected via
GEN8_DE_PORT_ISR so emulate monitor state change by setting it.
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Backmerge for recent request->hw_context change and
new vGPU huge page capability definition.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Use MCURSOR_ instead of CURSOR_ as the prefix for the non-845/865
cursor defines consistently, and move the pipe CSC enable bit next
to the other non-845/865 cursor defines.
v2: Take care of gvt uses as well
v3: Another gvt use popped up
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180131143709.875-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com> #v2
|
|
The patch set splits out 2 small locks from the original big gvt lock:
- vgpu_lock protects per-vGPU data and logic, especially the vGPU
trap emulation path.
- sched_lock protects gvt scheudler structure, context schedule logic
and vGPU's schedule data.
Use vgpu_lock to replace the gvt big lock. By doing this, the
mmio read/write trap path, vgpu virtual event emulation and other
vgpu related process, would be protected under per vgpu_lock.
v9:
- Change commit author since the patches are improved a lot compared
with original version.
Original author: Pei Zhang <pei.zhang@intel.com>
- Rebase to latest gvt-staging.
v8:
- Correct coding and comment style.
- Rebase to latest gvt-staging.
v7:
- Remove gtt_lock since already proteced by gvt_lock and vgpu_lock.
- Fix a typo in intel_gvt_deactivate_vgpu, unlock the wrong lock.
v6:
- Rebase to latest gvt-staging.
v5:
- Rebase to latest gvt-staging.
- intel_vgpu_page_track_handler should use vgpu_lock.
v4:
- Rebase to latest gvt-staging.
- Protect vgpu->active access with vgpu_lock.
- Do not wait gpu idle in vgpu_lock.
v3: update to latest code base
v2: add gvt->lock in function gvt_check_vblank_emulation
Performance comparison on Kabylake platform.
- Configuration:
Host: Ubuntu 16.04.
Guest 1 & 2: Ubuntu 16.04.
glmark2 score comparison:
- Configuration:
Host: glxgears.
Guests: glmark2.
+--------------------------------+-----------------+
| Setup | glmark2 score |
+--------------------------------+-----------------+
| unified lock, iommu=on | 58~62 (avg. 60) |
+--------------------------------+-----------------+
| unified lock, iommu=igfx_off | 57~61 (avg. 59) |
+--------------------------------+-----------------+
| per-logic lock, iommu=on | 60~68 (avg. 64) |
+--------------------------------+-----------------+
| per-logic lock, iommu=igfx_off | 61~67 (avg. 64) |
+--------------------------------+-----------------+
lock_stat comparison:
- Configuration:
Stop lock stat immediately after boot up.
Boot 2 VM Guests.
Run glmark2 in guests.
Start perf lock_stat for 20 seconds and stop again.
- Legend: c - contentions; w - waittime-avg
+------------+-----------------+-----------+---------------+------------+
| | gvt_lock |sched_lock | vgpu_lock | gtt_lock |
+ lock type; +-----------------+-----------+---------------+------------+
| iommu set | c | w | c | w | c | w | c | w |
+------------+-------+---------+----+------+------+--------+-----+------+
| unified; | 20697 | 839 |N/A | N/A | N/A | N/A | N/A | N/A |
| on | | | | | | | | |
+------------+-------+---------+----+------+------+--------+-----+------+
| unified; | 21838 | 658.15 |N/A | N/A | N/A | N/A | N/A | N/A |
| igfx_off | | | | | | | | |
+------------+-------+---------+----+------+------+--------+-----+------+
| per-logic; | 1553 | 1599.96 |9458|429.97| 5846 | 274.33 | 0 | 0.00 |
| on | | | | | | | | |
+------------+-------+---------+----+------+------+--------+-----+------+
| per-logic; | 1911 | 1678.32 |8335|445.16| 5451 | 244.80 | 0 | 0.00 |
| igfx_off | | | | | | | | |
+------------+-------+---------+----+------+------+--------+-----+------+
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
initialization
Much error exist in host dmesg during guest boot up with loca display
enabled.
gvt: vgpu 1: invalid range gmadr 0x0 size 0x0
This error happens when qemu get dmabuf info in case that the virtual
display plane is enabled but its base address is an invalid 0, such
case may be true before guest enable its plane. At this moment, its
state is copied from host where the plane may be enabled.
This patch disable primary/sprite/cursor plane at virtual display
initialization, so intel_vgpu_decode_primary/cursor/sprite could
return early as plane is disabled, then plane base check is skipped and
error message disapper.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
We had previous hack that tried to accept either i915_reg_t or offset
value to access vGPU virtual/shadow regs which broke that purpose to
be type safe in context. This one trys to explicitly separate the usage
of typed mmio reg with real offset.
Old vgpu_vreg(offset) helper is used only for offset now with new
vgpu_vreg_t(reg) is used for i915_reg_t only. Convert left usage
of that to new helper.
Also fixed left KASAN warning issues caused by previous hack.
v2: rebase, fixup against recent mmio switch change
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
observed igt drv_module_reload test case failure on 4.15.0
rc2 kernel with panic due to no active pipe available.
the gpu will reset during unload/load and make pipe config reg
lost which can cause kernel panic issue happen.
this patch is to move pipe enabling to emulate_mointor_status_chagne
to handle vgpu reset case as well.
Fixes: 7e6059020894 ("drm/i915/gvt: enabled pipe A default on creating vgpu")
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit f5f00e7dcc4161f07b76ff1a854e8b1ea7a1ed41)
|
|
Chris requested this backmerge for a reconciliation on
drm_print.h between drm-misc-next and drm-intel-next-queued
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This patch is to introduce the framebuffer decoder which can decode guest
OS's framebuffer information, including primary, cursor and sprite plane.
v16:
- rebase to 4.14.0-rc6.
v14:
- refine pixel format table. (Zhenyu)
v9:
- move drm format change to a separate patch. (Xiaoguang)
v8:
- fix a bug in decoding primary plane. (Tina)
v7:
- refine framebuffer decoder code. (Zhenyu)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
when i915 driver unloading, it will shutdown all CRTCs and
it will introudce kernel panic when conducting igt drv_module_reload
test case under guest environment (bug reported by XENGT-468) as below:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000070
IP: intel_edp_backlight_off+0xe/0x7c [i915]
RIP: 0010:intel_edp_backlight_off+0xe/0x7c [i915]
Call Trace:
intel_disable_ddi+0xb3/0xbc [i915]
intel_modeset_setup_hw_state+0x654/0xb4c [i915]
intel_modeset_init+0x9f1/0xe69 [i915]
? intel_i2c_reset+0x3d/0x40 [i915]
? intel_setup_gmbus+0xba/0x249 [i915]
i915_driver_load+0xae5/0xcc0 [i915]
i915_pci_probe+0x3a/0x3c [i915]
local_pci_probe+0x38/0x7b
pci_device_probe+0xec/0x12b
driver_probe_device+0x134/0x294
__driver_attach+0x6a/0x8c
? driver_probe_device+0x294/0x294
bus_for_each_dev+0x68/0x80
driver_attach+0x19/0x1b
bus_add_driver+0xea/0x1d3
? 0xffffffffa03cd000
driver_register+0x85/0xc1
? 0xffffffffa03cd000
__pci_register_driver+0x55/0x57
i915_init+0x57/0x5a [i915]
do_one_initcall+0x8a/0x12e
? __vunmap+0x8d/0x93
? kmem_cache_alloc_trace+0x96/0x11c
do_init_module+0x5a/0x1e1
in this case, active connector detected but no active pipe
available, so it will hang to disable connector.
to fix, on vgpu creating, to report active pipe available for
guest.
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
git://anongit.freedesktop.org/git/drm-intel into drm-next
Final pile of features for 4.14
- New ioctl to change NOA configurations, plus prep (Lionel)
- CCS (color compression) scanout support, based on the fancy new
modifier additions (Ville&Ben)
- Document i915 register macro style (Jani)
- Many more gen10/cnl patches (Rodrigo, Pualo, ...)
- More gpu reset vs. modeset duct-tape to restore the old way.
- prep work for cnl: hpd_pin reorg (Rodrigo), support for more power
wells (Imre), i2c pin reorg (Anusha)
- drm_syncobj support (Jason Ekstrand)
- forcewake vs gpu reset fix (Chris)
- execbuf speedup for the no-relocs fastpath, anv/vk low-overhead ftw (Chris)
- switch to idr/radixtree instead of the resizing ht for execbuf id->vma
lookups (Chris)
gvt:
- MMIO save/restore optimization (Changbin)
- Split workload scan vs. dispatch for more parallel exec (Ping)
- vGPU full 48bit ppgtt support (Joonas, Tina)
- vGPU hw id expose for perf (Zhenyu)
Bunch of work all over to make the igt CI runs more complete/stable.
Watch https://intel-gfx-ci.01.org/tree/drm-tip/shards-all.html for
progress in getting this ready. Next week we're going into production
mode (i.e. will send results to intel-gfx) on hsw, more platforms to
come.
Also, a new maintainer tram, I'm stepping out. Huge thanks to Jani for
being an awesome co-maintainer the past few years, and all the best
for Jani, Joonas&Rodrigo as the new maintainers!
* tag 'drm-intel-next-2017-08-18' of git://anongit.freedesktop.org/git/drm-intel: (179 commits)
drm/i915: Update DRIVER_DATE to 20170818
drm/i915/bxt: use NULL for GPIO connection ID
drm/i915: Mark the GT as busy before idling the previous request
drm/i915: Trivial grammar fix s/opt of/opt out of/ in comment
drm/i915: Replace execbuf vma ht with an idr
drm/i915: Simplify eb_lookup_vmas()
drm/i915: Convert execbuf to use struct-of-array packing for critical fields
drm/i915: Check context status before looking up our obj/vma
drm/i915: Don't use MI_STORE_DWORD_IMM on Sandybridge/vcs
drm/i915: Stop touching forcewake following a gen6+ engine reset
MAINTAINERS: drm/i915 has a new maintainer team
drm/i915: Split pin mapping into per platform functions
drm/i915/opregion: let user specify override VBT via firmware load
drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake.
drm/i915/gen10: implement gen 10 watermarks calculations
drm/i915/cnl: Fix LSPCON support.
drm/i915/vbt: ignore extraneous child devices for a port
drm/i915/cnl: Setup PAT Index.
drm/i915/edp: Allow alternate fixed mode for eDP if available.
drm/i915: Add support for drm syncobjs
...
|
|
The pattern of a power well backing a set of fuses whose initialization
we need to wait for during power well enabling is common to all GEN9+
platforms. Adding support for this to the HSW power well enable helper
allows us to use the HSW/BDW power well code for GEN9+ as well in a
follow-up patch.
v2:
- Use an enum for power gates instead of raw numbers. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170711204236.5618-6-imre.deak@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Once the Windows guest is shutdown, the display pipe will be disabled
and intel_gvt_check_vblank_emulation will be called to check if the
vblank timer is turned off. Given the scenario of creating VM1 ,VM2,
destoying VM2 in current code, VM1 has pipe enabled and continues to
check VM2, the flag have_enabled_pipe is always false since all the VM2
pipes are disabled, so the vblank timer will be canceled and TDR happens
in Windows VM1 guest due to the vsync timeout.
In this patch the vblank timer will be never canceled once one pipe is
enabled.
v2:
- remove have_enabled_pipe flag and check pipe enabled directly. (Zhenyu)
Cc: Wang Hongbo <hongbo.wang@intel.com>
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
When host connects a crt screen, linux guest will detect two
screens: crt and dp. This is wrong as linux guest has only
one dp.
In order to avoid guest get host crt screen, we should set
ADPA_CRT_HOTPLUG_MONITOR to none. But MMIO_RO(PCH_ADPA) prevent
from that. So MMIO_DH should be used instead of MMIO_RO.
v2: Clear its staus to none at initialize, so guest don't
get host crt.(Zhangyu)
v3: SKL doesn't have this register, limit it to pre_skl.(xiong)
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
On BDW, when host physical screen and guest virtual screen aren't on
the same DDI port, guest i915 driver prints the following error and
stop running.
[ 6.775873] BUG: unable to handle kernel NULL pointer dereference
at 0000000000000068
[ 6.775928] IP: intel_ddi_clock_get+0x81/0x430 [i915]
[ 6.776206] Call Trace:
[ 6.776233] ? vgpu_read32+0x4f/0x100 [i915]
[ 6.776264] intel_ddi_get_config+0x11c/0x230 [i915]
[ 6.776298] intel_modeset_setup_hw_state+0x313/0xd40 [i915]
[ 6.776334] intel_modeset_init+0xe49/0x18d0 [i915]
[ 6.776368] ? vgpu_write32+0x53/0x100 [i915]
[ 6.776731] ? intel_i2c_reset+0x42/0x50 [i915]
[ 6.777085] ? intel_setup_gmbus+0x32a/0x350 [i915]
[ 6.777427] i915_driver_load+0xabc/0x14d0 [i915]
[ 6.777768] i915_pci_probe+0x4f/0x70 [i915]
The null pointer is guest intel_crtc_state->shared_dpll which is
setted in haswell_get_ddi_pll(). When guest and host screen are
on different DDI port, host driver won't set PORT_CLK_SET(guest_port),
so haswell_get_ddi_pll() will return null and don't set
pipe_config->shared_dpll, once the following program refernce this
structure, it will print the above error.
This patch set the initial val of guest PORT_CLK_SEL(guest_port) to
LCPLL_810. And guest i915 driver will reset this value according to
guest screen mode.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
GVT implements a purely virtual monitor for virtual GPU independent of
the host. Some DDI related MMIO are not initialized in current code
which cause the display initialization failure in guest. This patch
fills the gap.
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Extend function dispatch logic to support KBL platform.
Signed-off-by: Xu Han <xu.han@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
GVT-g will emulate a fixed DPCD data to VM for DP/eDP panel. Update
this data to latest DP1.2 with the maximum lane bandwidth of 5.4G/s
to support 4K resolution in VM.
V3: modify patch comment
V2: add inline comment to describe the dpcd_fix_data.
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
detection
Initialize the correct vreg for virtual monitor.
Set PG0/1/2 distribution and fuse download done in SKL_FUSE_STATUS.
Set PLL_ENABLE and PLL_LOCK in LCPLL_CTL.
Guest may need to check these registers for display monitor detection
on Skylake platforms.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
update the correct virtual montior connection status to vreg
v2: address yulei's comment on commit message
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This assigns resolution definition for each vGPU type. For smaller
resource type we should limit max resolution, so e.g limit to 1024x768
for 64M type, others are still default to 1920x1200.
v2: Fix for actual 1920x1200 resolution
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
We'll need to apply different resolution for vgpu types, so this
adds more EDID types definition.
v2: fix typo for actual 1920x1200 resolution
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
We also need reset vGPU virtual display emulation. Since all vreg has
been cleared, we need reset display related vreg to reflect our display
setting.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
The current virtual edid can only support the resolution up
to 1024x768. Update the virtual edid so that can support more
resoltions. With this new virtual edid, resolution can
be up to 1920x1200.
V2: add detailed modeline description in edid code comments
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Mark all local functions & variables as static.
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
i915 core should only call functions and structures exposed through
intel_gvt.h. Remove internal gvt.h and i915_pvinfo.h.
Change for internal intel_gvt structure as private handler which
not requires to expose gvt internal structure for i915 core.
v2: Fix per Chris's comment
- carefully handle dev_priv->gvt assignment
- add necessary bracket for macro helper
- forward declartion struct intel_gvt
- keep free operation within same file handling alloc
v3: fix use after free and remove intel_gvt.initialized
v4: change to_gvt() to an inline
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This patch introduces the GVT-g display virtualization.
It consists a collection of display MMIO handlers, like power well register
handler, pipe register handler, plane register handler, which will emulate
all display MMIOs behavior to support virtual mode setting sequence for
guest.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
Dave Airlie
Xiaolin Zhang
Colin Xu
Zhenyu Wang
Ville Syrjälä
Xiong Zhang
Rodrigo Vivi
Tina Zhang
Imre Deak
fred gao
Pei Zhang
Xu Han
Weinan Li
Bing Niu
Changbin Du
Chuanxiao Dong
Zhi Wang