aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/armada
AgeCommit message (Collapse)Author
2016-08-01Merge tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Merge drm updates from Dave Airlie: "This is the main drm pull request for 4.8. I'm down with a cold at the moment so hopefully this isn't in too bad a state, I finished pulling stuff last week mostly (nouveau fixes just went in today), so only this message should be influenced by illness. Apologies to anyone who's major feature I missed :-) Core: Lockless GEM BO freeing Non-blocking atomic work Documentation changes (rst/sphinx) Prep for new fencing changes Simple display helpers Master/auth changes Register/unregister rework Loads of trivial patches/fixes. New stuff: ARM Mali display driver (not the 3D chip) sii902x RGB->HDMI bridge Panel: Support for new panels Improved backlight support Bridge: Convert ADV7511 to bridge driver ADV7533 support TC358767 (DSI/DPI to eDP) encoder chip support i915: BXT support enabled by default GVT-g infrastructure GuC command submission and fixes BXT workarounds SKL/BKL workarounds Demidlayering device registration Thundering herd fixes Missing pci ids Atomic updates amdgpu/radeon: ATPX improvements for better dGPU power control on PX systems New power features for CZ/BR/ST Pipelined BO moves and evictions in TTM GPU scheduler improvements GPU reset improvements Overclocking on dGPUs with amdgpu Polaris powermanagement enabled nouveau: GK20A/GM20B volt and clock improvements. Initial support for GP100/GP104 GPUs, GP104 will not yet support acceleration due to NVIDIA having not released firmware for them as of yet. exynos: Exynos5433 SoC with IOMMU support. vc4: Shader validation for branching imx-drm: Atomic mode setting conversion Reworked DMFC FIFO allocation External bridge support analogix-dp: RK3399 eDP support Lots of fixes. rockchip: Lots of small fixes. msm: DT bindings cleanups Shrinker and madvise support ASoC HDMI codec support tegra: Host1x driver cleanups SOR reworking for DP support Runtime PM support omapdrm: PLL enhancements Header refactoring Gamma table support arcgpu: Simulator support virtio-gpu: Atomic modesetting fixes. rcar-du: Misc fixes. mediatek: MT8173 HDMI support sti: ASOC HDMI codec support Minor fixes fsl-dcu: Suspend/resume support Bridge support amdkfd: Minor fixes. etnaviv: Enable GPU clock gating hisilicon: Vblank and other fixes" * tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits) drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup drm/nouveau/acpi: fix lockup with PCIe runtime PM drm/nouveau/acpi: check for function 0x1B before using it drm/nouveau/acpi: return supported DSM functions drm/nouveau/acpi: ensure matching ACPI handle and supported functions drm/nouveau/fbcon: fix font width not divisible by 8 drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce drm/amdgpu: add query device id and revision id into system info entry at CGS drm/amdgpu: add new definition in bif header drm/amd/powerplay: rename smum header guards drm/amdgpu: enable UVD context buffer for older HW drm/amdgpu: fix default UVD context size drm/amdgpu: fix incorrect type of info_id drm/amdgpu: make amdgpu_cgs_call_acpi_method as static drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build drm/amdgpu: enable UVD VM only on polaris drm/amdgpu: increase timeout of IB test drm/amdgpu: add destroy session when generate VCE destroy msg. drm/amd: fix deadlock of job_list_lock V2 ...
2016-07-18drm/armada: make fbdev support really optionalTobias Jakobi
Currently enabling Marvell Armada DRM support automatically pulls in fbdev dependency. However this dep is unnecessary since DRM core already handles this for us (DRM_FBDEV_EMULATION). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1468586897-32298-3-git-send-email-tjakobi@math.uni-bielefeld.de
2016-07-12drm/armada: use drm_crtc_handle_vblank()Gustavo Padovan
Remove legacy usage of drm_handle_vblank() Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1467677092-5089-2-git-send-email-gustavo@padovan.org
2016-06-21drm: Lobotomize set_busid nonsense for !pci driversDaniel Vetter
We already have a fallback in place to fill out the unique from dev->unique, which is set to something reasonable in drm_dev_alloc. Which means we only need to have a special set_busid for pci devices, to be able to care the backwards compat code for drm 1.1 around, which libdrm still needs. While developing and testing this patch things blew up in really interesting ways, and the code is rather confusing in naming things between the kernel code, ioctl #defines and libdrm. For the next brave dragon slayer, document all this madness properly in the userspace interface section of gpu.tmpl. v2: Make drm_dev_set_unique static and update kerneldoc. v3: Entire rewrite, plus document what's going on for posterity in the gpu docbook uapi section. v4: Drop accidental amdgpu hunk (Emil). v5: Drop accidental omapdrm vblank counter change (Emil). v6: Rebase on top of the sphinx conversion. Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Emil Velikov <emil.l.velikov@gmail.com> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> (virt_gpu) Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-06-17drm: Deal with rotation in drm_plane_helper_check_update()Ville Syrjälä
drm_plane_helper_check_update() needs to account for the plane rotation for correct clipping/scaling calculations. Do so. There was an earlier attempt [1] to add this into intel_check_primary_plane() but I requested that it'd be put into the helper instead. An updated patch never materialized AFAICS, so I went ahead and cooked one up myself. v2: Deal with new drm_plane_helper_check_update() callers [1] https://patchwork.freedesktop.org/patch/65177/ Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1466172790-10025-1-git-send-email-ville.syrjala@linux.intel.com
2016-06-09Merge tag 'topic/drm-misc-2016-06-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next As promised, piles of prep work all around: - drm_atomic_state rework, prep for nonblocking commit helpers - fence patches from Gustavo and Christian to prep for atomic fences and some cool work in ttm/amdgpu from Christian - drm event prep for both nonblocking commit and atomic fences - Gustavo seems on a crusade against the non-kms-native version of the vblank functions. - prep work from Boris to nuke all the silly ->best_encoder implementations we have (we really only need that for truly dynamic cases like dvi-i vs dvi-d or dp mst selecting the right transcoder on intel) - prep work from Laurent to rework the format handling functions - and few small things all over * tag 'topic/drm-misc-2016-06-07' of git://anongit.freedesktop.org/drm-intel: (47 commits) drm/dsi: Implement set tear scanline drm/fb_cma_helper: Implement fb_mmap callback drm/qxl: Remove useless drm_fb_get_bpp_depth() call drm/ast: Remove useless drm_fb_get_bpp_depth() call drm/atomic: Fix remaining places where !funcs->best_encoder is valid drm/core: Change declaration for gamma_set. Documentation: add fence-array to kernel DocBook drm/shmobile: use drm_crtc_vblank_{get,put}() drm/radeon: use drm_crtc_vblank_{get,put}() drm/qxl: use drm_crtc_vblank_{get,put}() drm/atmel: use drm_crtc_vblank_{get,put}() drm/armada: use drm_crtc_vblank_{get,put}() drm/amdgpu: use drm_crtc_vblank_{get,put}() drm/virtio: use drm_crtc_send_vblank_event() drm/udl: use drm_crtc_send_vblank_event() drm/qxl: use drm_crtc_send_vblank_event() drm/atmel: use drm_crtc_send_vblank_event() drm/armada: use drm_crtc_send_vblank_event() drm/doc: Switch to sphinx/rst fixed-width quoting drm/doc: Drop kerneldoc for static functions in drm_irq.c ...
2016-06-06drm/armada: use drm_crtc_vblank_{get,put}()Gustavo Padovan
Replace the legacy drm_vblank_{get,put}() with the new helper functions. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465224105-21485-9-git-send-email-gustavo@padovan.org
2016-06-06drm/armada: use drm_crtc_send_vblank_event()Gustavo Padovan
Replace the legacy drm_send_vblank_event() with the new helper function. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465224105-21485-2-git-send-email-gustavo@padovan.org
2016-06-01drm/armada: Use lockless gem BO free callbackDaniel Vetter
No dev->struct_mutex anywhere to be seen. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-2-git-send-email-daniel.vetter@ffwll.ch
2016-05-29file_inode(f)->i_mapping is f->f_mappingAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-21drm: Nuke ->vblank_disable_allowedDaniel Vetter
This was added in commit 0a3e67a4caac273a3bfc4ced3da364830b1ab241 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Tue Sep 30 12:14:26 2008 -0700 drm: Rework vblank-wait handling to allow interrupt reduction. to stay backwards-compatible with old UMS code that didn't even tell the kernel when it did a modeset, so that the kernel could save/restore vblank counters. At worst this means vblanks will be somewhat funky on a setup that very likely no one still runs. So let's just nuke it. Plan B would be to set it unconditionally in drm_vblank_init for kms drivers, instead of in each driver separately. So if this patch breaks anything please only restore the hunks in drmP.h and drm_irq.c, plus add a check for DRIVER_MODESET in drm_vblank_init. Stumbled over this in a discussion on irc with Chris. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-18drm: remove unused dev variablesArnd Bergmann
After drm_gem_object_lookup() was changed along with all its callers, we have several drivers that have unused variables: drm/armada/armada_crtc.c: In function 'armada_drm_crtc_cursor_set': drm/armada/armada_crtc.c:900:21: error: unused variable 'dev' [-Werror=unused-variable] drm/nouveau/nouveau_gem.c: In function 'validate_init': drm/nouveau/nouveau_gem.c:371:21: error: unused variable 'dev' [-Werror=unused-variable] drm/nouveau/nv50_display.c: In function 'nv50_crtc_cursor_set': drm/nouveau/nv50_display.c:1308:21: error: unused variable 'dev' [-Werror=unused-variable] drm/radeon/radeon_cs.c: In function 'radeon_cs_parser_relocs': drm/radeon/radeon_cs.c:77:21: error: unused variable 'ddev' [-Werror=unused-variable] This fixes all the instances I found with ARM randconfig builds so far. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: a8ad0bd84f98 ("drm: Remove unused drm_device from drm_gem_object_lookup()") Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1463587653-3035181-6-git-send-email-arnd@arndb.de
2016-05-17drm: Remove unused drm_device from drm_gem_object_lookup()Chris Wilson
drm_gem_object_lookup() has never required the drm_device for its file local translation of the user handle to the GEM object. Let's remove the unused parameter and save some space. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: Fixup kerneldoc too.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-25drm/armada: Remove NULL open/pre/postclose hooksDaniel Vetter
The compiler will do this, but the void hits when grepping all the hooks for a subsystem wide audit are slightly annoying. So remove them for next time around. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452548477-15905-8-git-send-email-daniel.vetter@ffwll.ch Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-12-23Merge branch 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm ↵Dave Airlie
into drm-next These are the patches from Daniel Vetter, getting rid of struct_mutex from the Armada DRM driver. * 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm/armada: use a private mutex to protect priv->linear drm/armada: drop struct_mutex from cursor paths drm/armada: don't grab dev->struct_mutex for in mmap offset ioctl drm/armada: plug leak in dumb_map_offset drm/armada: use unlocked gem unreferencing
2015-12-15drm/armada: Constify function pointer structsVille Syrjälä
Moves a bunch of junk to .rodata from .data. drivers/gpu/drm/armada/armada.ko: -.rodata 1040 +.rodata 1100 -.data 1156 +.data 1096 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-12-git-send-email-boris.brezillon@free-electrons.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-11drm: Pass 'name' to drm_universal_plane_init()Ville Syrjälä
Done with coccinelle for the most part. It choked on msm/mdp/mdp5/mdp5_plane.c like so: "BAD:!!!!! enum drm_plane_type type;" No idea how to deal with that, so I just fixed that up by hand. Also it thinks '...' is part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder in its place and got rid of it with sed afterwards. I didn't convert drm_plane_init() since passing the varargs through would mean either cpp macros or va_list, and I figured we don't care about these legacy functions enough to warrant the extra pain. @@ typedef uint32_t; identifier dev, plane, possible_crtcs, funcs, formats, format_count, type; @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, unsigned long possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, enum drm_plane_type type + ,const char *name, int DOTDOTDOT ) { ... } @@ identifier dev, plane, possible_crtcs, funcs, formats, format_count, type; @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, unsigned long possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, enum drm_plane_type type + ,const char *name, int DOTDOTDOT ); @@ expression E1, E2, E3, E4, E5, E6, E7; @@ drm_universal_plane_init(E1, E2, E3, E4, E5, E6, E7 + ,NULL ) v2: Split crtc and plane changes apart Pass NUL for no-name instead of "" Leave drm_plane_init() alone v3: Add ', or NULL...' to @name kernel doc (Jani) Annotate the function with __printf() attribute (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449670795-2853-1-git-send-email-ville.syrjala@linux.intel.com
2015-12-11drm: Pass 'name' to drm_crtc_init_with_planes()Ville Syrjälä
Done with coccinelle for the most part. However, it thinks '...' is part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder in its place and got rid of it with sed afterwards. I didn't convert drm_crtc_init() since passing the varargs through would mean either cpp macros or va_list, and I figured we don't care about these legacy functions enough to warrant the extra pain. @@ identifier dev, crtc, primary, cursor, funcs; @@ int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, struct drm_plane *primary, struct drm_plane *cursor, const struct drm_crtc_funcs *funcs + ,const char *name, int DOTDOTDOT ) { ... } @@ identifier dev, crtc, primary, cursor, funcs; @@ int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, struct drm_plane *primary, struct drm_plane *cursor, const struct drm_crtc_funcs *funcs + ,const char *name, int DOTDOTDOT ); @@ expression E1, E2, E3, E4, E5; @@ drm_crtc_init_with_planes(E1, E2, E3, E4, E5 + ,NULL ) v2: Split crtc and plane changes apart Pass NULL for no-name instead of "" Leave drm_crtc_init() alone v3: Add ', or NULL...' to @name kernel doc (Jani) Annotate the function with __printf() attribute (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449670771-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-12-05drm/armada: use a private mutex to protect priv->linearDaniel Vetter
Reusing the Big DRM Lock just leaks, and the few things left that dev->struct_mutex protected are very well contained - it's just the linear drm_mm manager. With this armada is completely struct_mutex free! v2: Convert things properly and also take the lock in armada_gem_free_object, and remove the stale comment (Russell). Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-05drm/armada: drop struct_mutex from cursor pathsDaniel Vetter
The kms state itself is already protected by the modeset locks acquired by the drm core. The only thing left is gem bo state, and since the cursor code expects small objects which are statically mapped at create time and then invariant over the lifetime of the gem bo there's nothing to protect. See armada_gem_dumb_create -> armada_gem_linear_back which assigns obj->addr which is the only thing used by the cursor code. Only tricky bit is to switch to the _unlocked unreference function. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-03drm/armada: don't grab dev->struct_mutex for in mmap offset ioctlDaniel Vetter
Since David Herrmann's mmap vma manager rework we don't need to grab dev->struct_mutex any more to prevent races when looking up the mmap offset. Drop it and instead don't forget to use the unref_unlocked variant (since the drm core still cares). v2: Split out the leak fix in dump_map_offset into a separate patch as requested by Russell. Also align labels the same way as before to stick with local coding style. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-03drm/armada: plug leak in dumb_map_offsetDaniel Vetter
We need to drop the gem bo reference if it's an imported one. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-03drm/armada: use unlocked gem unreferencingDaniel Vetter
For drm_gem_object_unreference callers are required to hold dev->struct_mutex, which these paths don't. Enforcing this requirement has become a bit more strict with commit ef4c6270bf2867e2f8032e9614d1a8cfc6c71663 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Oct 15 09:36:25 2015 +0200 drm/gem: Check locking in drm_gem_object_unreference Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-11-24drm: Pass the user drm_mode_fb_cmd2 as const to .fb_create()Ville Syrjälä
Drivers shouldn't clobber the passed in addfb ioctl parameters. i915 was doing just that. To prevent it from happening again, pass the struct around as const, starting all the way from internal_framebuffer_create(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-20drm/armada: Convert the probe function to the generic drm_of_component_probe()Liviu Dudau
The armada DRM driver keeps some old platform data compatibility in the probe function that makes moving to the generic drm_of_component_probe() a bit more complicated that it should. Refactor the probe function to do the platform_data processing after the generic probe (and only if that fails). This way future cleanup can further remove support for it. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1445332995-11212-5-git-send-email-Liviu.Dudau@arm.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-20Merge tag 'topic/drm-misc-2015-10-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next More drm-misc for 4.4. - fb refcount fix in atomic fbdev - various locking reworks to reduce drm_global_mutex and dev->struct_mutex - rename docbook to gpu.tmpl and include vga_switcheroo stuff, plus more vga_switcheroo (Lukas Wunner) - viewport check fixes for atomic drivers from Ville - DRM_DEBUG_VBL from Ville - non-contentious header fixes from Mikko Rapeli - small things all over * tag 'topic/drm-misc-2015-10-19' of git://anongit.freedesktop.org/drm-intel: (31 commits) drm/fb-helper: Fix fb refcounting in pan_display_atomic drm/fb-helper: Set plane rotation directly drm: fix mutex leak in drm_dp_get_mst_branch_device drm: Check plane src coordinates correctly during page flip for atomic drivers drm: Check crtc viewport correctly with rotated primary plane on atomic drivers drm: Refactor plane src coordinate checks drm: Swap w/h when converting the mode to src coordidates for a rotated primary plane drm: Don't leak fb when plane crtc coodinates are bad ALSA: hda - Spell vga_switcheroo consistently drm/gem: Use kref_get_unless_zero for the weak mmap references drm/vgem: Drop vgem_drm_gem_mmap drm: Fix return value of drm_framebuffer_init() drm/gem: Use container_of in drm_gem_object_free drm/gem: Check locking in drm_gem_object_unreference drm/gem: Drop struct_mutex requirement from drm_gem_mmap_obj drm/i810_drm.h: include drm/drm.h r128_drm.h: include drm/drm.h savage_drm.h: include <drm/drm.h> gpu/doc: Convert to markdown harder gpu/doc: Add vga_switcheroo documentation ...
2015-10-16drm/<drivers>: Drop DRM_UNLOCKED from modeset driversDaniel Vetter
Just one special case (since i915 lost its ums code, yay): - radeon: Has slots for the old ums ioctls which don't have DRM_UNLOCKED, but all filled with drm_invalid_op. So ok to drop it everywhere. Every other kms driver just has DRM_UNLOCKED for all their ioctls, as they should. v2: admgpu happened, include that one too. And i915 lost its UMS support which means we can change all the i915 ioctls too. v3: Rebased on top of new vmwgfx DX interface extensions. v4: Rebase on top of render-node support in exynos. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-16Merge tag 'topic/drm-misc-2015-10-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next Another round of drm-misc. Unfortunately the DRM_UNLOCKED removal for DRIVER_MODESET isn't complete yet for lack of review on 1-2 patches. Otherwise just various stuff all over. * tag 'topic/drm-misc-2015-10-08' of git://anongit.freedesktop.org/drm-intel: drm: Stop using drm_vblank_count() as the hw frame counter drm/irq: Use unsigned int pipe in public API drm: Use DRM_ROTATE_MASK and DRM_REFLECT_MASK drm: Add DRM_ROTATE_MASK and DRM_REFLECT_MASK vga_switcheroo: Add missing locking vgaarb: use kzalloc in vga_arbiter_add_pci_device() drm: Don't zero vblank timestamps from the irq handler drm: Hack around CONFIG_AGP=m build failures drm/i915: Remove setparam ioctl drm: Remove dummy agp ioctl wrappers drm/vmwgfx: Stop checking for DRM_UNLOCKED drm/drm_ioctl.c: kerneldoc drm: Define a drm_invalid_op ioctl implementation drm: Remove __OS_HAS_AGP drm/doc: Update docs about device instance setup
2015-10-15Merge branch 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm ↵Dave Airlie
into drm-next * remove support for the non-component support from the Armada DRM driver, switching it to component-only mode. * create a "armada plane" to allow the primary and overlay planes to share some code. * increase efficiency by using inherently atomic operations, rather than spinlocking to achieve atomicity. Eg, if we want to exchange a value, using xchg(). * increase PM savings by stopping the external pixel clock when we're in DPMS mode. * 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm/armada: move frame wait wakeup into plane work drm/armada: convert overlay plane vbl worker to a armada plane worker drm/armada: move CRTC flip work to primary plane work drm/armada: move frame wait into armada_frame drm/armada: move the locking for armada_drm_vbl_event_remove() drm/armada: move the update of dplane->ctrl0 out of spinlock drm/armada: move write to dma_ctrl0 to armada_drm_crtc_plane_disable() drm/armada: provide a common helper to disable a plane drm/armada: allocate primary plane ourselves drm/armada: add primary plane creation drm/armada: introduce generic armada_plane struct drm/armada: update armada overlay to use drm_universal_plane_init() drm/armada: use xchg() to atomically update dplane->old_fb drm/armada: factor out retirement of old fb drm/armada: rename overlay identifiers drm/armada: redo locking and atomics for armada_drm_crtc_complete_frame_work() drm/armada: disable CRTC clock during DPMS drm/armada: use drm_plane_force_disable() to disable the overlay plane drm/armada: move vbl code into armada_crtc drm/armada: remove non-component support
2015-10-07drm: Stop using drm_vblank_count() as the hw frame counterVille Syrjälä
drm_vblank_count() returns the software counter. We should not pretend it's the hw counter since we use the hw counter to figuere out what the software counter value should be. So instead provide a new function drm_vblank_no_hw_counter() for drivers that don't have a real hw counter. The new function simply returns 0, which is about the only thing it can do. Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Vincent Abriou <vincent.abriou@st.com> [danvet: s/int pipe/unsigned int pipe/ to follow Thierry's interface change.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-06drm/irq: Use unsigned int pipe in public APIThierry Reding
This continues the pattern started in commit cc1ef118fc09 ("drm/irq: Make pipe unsigned and name consistent"). This is applied to the public APIs and driver callbacks, so pretty much all drivers need to be updated to match the new prototypes. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Inki Dae <inki.dae@samsung.com> Cc: Jianwei Wang <jianwei.wang.chn@gmail.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Rob Clark <robdclark@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-01drm/armada: move frame wait wakeup into plane workRussell King
Move the wakeup for the frame wait into the armada plane work, to ensure that it is woken up every time we run a work. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-10-01drm/armada: convert overlay plane vbl worker to a armada plane workerRussell King
Convert the overlay plane to use the generic armada plane worker infrastructure which is shared with the primary plane. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-10-01drm/armada: move CRTC flip work to primary plane workRussell King
Add a plane work implementation, and move the CRTC framebuffer flip work to it for the primary plane. The idea is to have a common plane work implementation for both the primary and overlay planes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-10-01drm/armada: move frame wait into armada_frameRussell King
Both the CRTC and overlay frames have their own wait queues. It would make more sense if these were part of the plane - the primary plane for the CRTC and overlay plane for the overlay. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-10-01drm/armada: move the locking for armada_drm_vbl_event_remove()Russell King
Move the locking for armada_drm_vbl_event_remove() into itself, which makes this function symmetrical with armada_drm_vbl_event_add(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-10-01drm/armada: move the update of dplane->ctrl0 out of spinlockRussell King
It is not necessary to write dplane->ctrl0 under the CRTC spinlock, as this is only accessed under process context where the DRM locks will protect us instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-10-01drm/armada: move write to dma_ctrl0 to armada_drm_crtc_plane_disable()Russell King
Move the write to clear the DMA enable bit, and augment it with clearing the graphics enable bit for the primary plane. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-10-01drm/armada: provide a common helper to disable a planeRussell King
Provide a common helper to disable either the overlay or the primary plane. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-10-01drm/armada: allocate primary plane ourselvesRussell King
Allocate our own primary plane as an armada_plane. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-10-01drm/armada: add primary plane creationRussell King
Use drm_primary_helper_create_plane() to create our primary plane, and register the CRTC with drm_crtc_init_with_planes(). This enables the primary plane to be initialised with the supported format information. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-10-01drm/armada: introduce generic armada_plane structRussell King
Introduce a generic armada_plane struct which will eventually be used for both the primary and overlay planes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-10-01drm/armada: update armada overlay to use drm_universal_plane_init()Russell King
Use the new drm_universal_plane_init() rather than the legacy drm_plane_init(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-10-01drm/armada: use xchg() to atomically update dplane->old_fbRussell King
Rather than using a spinlock, use xchg() to atomically update dplane->old_fb. This allows us to eliminate dplane->lock. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-15drm/armada: factor out retirement of old fbRussell King
We have two identical places in the overlay code which retire the drm framebuffer. Factor these out into a common function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-15drm/armada: rename overlay identifiersRussell King
Include an _ovl infix into the overlay identifiers to separate them from the primary plane. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-15drm/armada: redo locking and atomics for armada_drm_crtc_complete_frame_work()Russell King
We can do better with armada_drm_crtc_complete_frame_work() - we can avoid taking the event lock unless a call to drm_send_vblank_event() is required, and using cmpxchg() and xchg(), we can eliminate the locking around dcrtc->frame_work entirely. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-15drm/armada: disable CRTC clock during DPMSRussell King
When the CRTC is in low power mode, it isn't running, and so there's no point keeping the CRTC clock enabled. Disable the CRTC clock during DPMS. We need to re-enable it in the mode_set callback to ensure that the variant's compute_clock() continues to see its clock in the expected state (enabled). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-15drm/armada: use drm_plane_force_disable() to disable the overlay planeRussell King
Use drm_plane_force_disable() to disable the overlay plane on a mode_set rather than coding this ourselves. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-28 02:45:58 +0000