aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
AgeCommit message (Collapse)Author
2020-06-03drm/amd/powerplay: perform PG ungate prior to CG ungateEvan Quan
[ Upstream commit f4fcfa4282c1a1bf51475ebb0ffda623eebf1191 ] Since gfxoff should be disabled first before trying to access those GC registers. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20drm/amd/powerplay: avoid using pm_en before it is initialized revisedTiecheng Zhou
[ Upstream commit 690ae30be163d5262feae01335b2a6f30569e5aa ] hwmgr->pm_en is initialized at hwmgr_hw_init. during amdgpu_device_init, there is amdgpu_asic_reset that calls to soc15_asic_reset (for V320 usecase, Vega10 asic), in which: 1) soc15_asic_reset_method calls to pp_get_asic_baco_capability (pm_en) 2) soc15_asic_baco_reset calls to pp_set_asic_baco_state (pm_en) pm_en is used in the above two cases while it has not yet been initialized So avoid using pm_en in the above two functions for V320 passthrough. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-07drm/amd/powerplay: refine code to support no-dpm caseEvan Quan
With "dpm=0", there will be no DPM enabled. The code needs to be refined to support this. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amdgpu/sriov: Tonga sriov also need load firmware with smuEmily Deng
Fix Tonga sriov load driver fail issue. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewd-by Yintian Tao <Yintian.tao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amd/powerplay: fix various dereferences of a pointer before it is null ↵Colin Ian King
checked There are several occurrances of the pointer hwmgr being dereferenced before it is null checked. Fix these by performing the dereference of hwmgr after it has been null checked. Addresses-Coverity: ("Dereference before null check") Fixes: c9ffa427db34e6 ("drm/amd/powerplay: enable pp one vf mode for vega10") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-11drm/amd/powerplay: enable pp one vf mode for vega10Yintian Tao
Originally, due to the restriction from PSP and SMU, VF has to send message to hypervisor driver to handle powerplay change which is complicated and redundant. Currently, SMU and PSP can support VF to directly handle powerplay change by itself. Therefore, the old code about the handshake between VF and PF to handle powerplay will be removed and VF will use new the registers below to handshake with SMU. mmMP1_SMN_C2PMSG_101: register to handle SMU message mmMP1_SMN_C2PMSG_102: register to handle SMU parameter mmMP1_SMN_C2PMSG_103: register to handle SMU response v2: remove module parameter pp_one_vf v3: fix the parens v4: forbid vf to change smu feature v5: use hwmon_attributes_visible to skip sepicified hwmon atrribute v6: change skip condition at vega10_copy_table_to_smc Signed-off-by: Yintian Tao <yttao@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-08drm/amd/powerplay: dynamically disable ds and ulv for computeKenneth Feng
This is to improve the performance in the compute mode for vega10. For example, the original performance for a rocm bandwidth test: 2G internal GPU copy, is about 99GB/s. With the idle power features disabled dynamically, the porformance is promoted to about 215GB/s. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amd/powerplay: support xgmi pstate setting on powerplay routine V2Evan Quan
Add xgmi pstate setting on powerplay routine. V2: split the change of is_support_sw_smu_xgmi into a separate patch Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amdgpu/vi: silence an uninitialized variable warningDan Carpenter
Smatch complains that we need to initialized "*cap" otherwise it can lead to an uninitialized variable bug in the caller. This seems like a reasonable warning and it doesn't hurt to silence it at least. drivers/gpu/drm/amd/amdgpu/vi.c:767 vi_asic_reset_method() error: uninitialized symbol 'baco_reset'. Fixes: 425db2553e43 ("drm/amdgpu: expose BACO interfaces to upper level from PP") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amd/powerplay: enable df cstate control on powerplay routineEvan Quan
Currently this is only supported on Vega20 with 40.50 and later SMC firmware. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Add smu lock around in pp_smu_i2c_bus_accessAndrey Grodzovsky
Protect from concurrent SMU accesses. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-27drm/amd/powerplay: Add interface to lock SMU HW I2C.Andrey Grodzovsky
v2: PPSMC_MSG_RequestI2CBus seems not to work and so to avoid conflict over I2C bus and engine disable thermal control access to force SMU stop using the I2C bus until the issue is reslolved. Expose and call vega20_is_smc_ram_running to skip locking when SMU FW is not yet loaded. v3: Remove the prevoius hack as the SMU found the bug. v5: Typo fix Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/poweplay: Add amd_pm_funcs callback for mode 2Andrey Grodzovsky
Add callback to call the new mode2 reset interface. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu/powerplay: return success if set_mp1_state is not setAlex Deucher
Some asics (APUs) don't have this callback so we want to return success. Avoids spurious error messages on APUs. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-30drm/amdgpu/powerplay: add a new interface to set the mp1 stateAlex Deucher
This is required for certain cases such as various GPU resets (mode1, mode2), BACO, shutdown, unload, etc. to put the SMU into the appropriate state for when the hw is re-initialized. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19drm/amd/powerplay: fix semicolon code style issueYang Wei
Delete superfluous semicolons. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19drm/amd/powerplay: add limit of pp_feature for smu (v3)Likun Gao
Move pp_feature from the struct of amd_powerplay to amdgpu_device. Add pp_feature limit for overdrive interface. v2: put pp_feature into struct amdgpu_pm. v3: merge feature_mask with pp_feature. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Suggested-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-25drm/amd/powerplay: support enabled ppfeatures retrieving and setting V3Evan Quan
User can use "ppfeatures" sysfs interface to retrieve and set enabled powerplay features. V2: expose this feature for Vega10 and later dGPUs V3: squash in removal of unused variable (Alex) Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-25drm/amdgpu: expose BACO interfaces to upper level from PPJim Qu
Signed-off-by: Jim Qu <Jim.Qu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-07drm/amd/powerplay: rv dal-pplib interface refactor powerplay parthersen wu
[WHY] clarify dal input parameters to pplib interface, remove un-used parameters. dal knows exactly which parameters needed and their effects at pplib and smu sides. current dal sequence for dcn1_update_clock to pplib: 1.smu10_display_clock_voltage_request for dcefclk 2.smu10_display_clock_voltage_request for fclk 3.phm_store_dal_configuration_data { set_min_deep_sleep_dcfclk set_active_display_count store_cc6_data --- this data never be referenced new sequence will be: 1. set_display_count --- need add new pplib interface 2. set_min_deep_sleep_dcfclk -- new pplib interface 3. set_hard_min_dcfclk_by_freq 4. set_hard_min_fclk_by_freq after this code refactor, smu10_display_clock_voltage_request, phm_store_dal_configuration_data will not be needed for rv. [HOW] step 1: add new functions at pplib interface step 2: add new functions at amdgpu dm and dc Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-19drm/amd/powerplay: Ratelimit all "was not implemented" messagesJoerg Roedel
Running kfdtest on an AMD Carizzo flooded the kernel log with thousands of these "was not implemented" messages, making it impossible to see other messages there. Ratelimit the messages to prevent user-space from flooding the kernel log. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-01drm/amd/powerplay: no MGPU fan boost enablement on DPM disabledEvan Quan
As MGPU fan boost feature will be definitely not needed when DPM is disabled. So, there is no need to error out. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-22drm/amd/pp: enable power limit increase in OD modeJoseph Greathouse
OverDrive mode allows users to increase the maximum SCLK and MCLK frequencies beyond the default on the GPU. However, this may not results in large performance gains if the GPU then runs into its TDP power limit. This patch adds the capability to increase the power limit of a GPU above its default maximum. This is only allowed when overdrive is enabled in the ppfeaturemask, since this is an overdrive feature. The TDPODLimit value from the VBIOS describes how how much higher the TDP should be allowed to go over its default, in percentage. v2: Moved dereference of hwmgr to after its validity check Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-22drm/amd/powerplay: error out when force clock level under auto dpm mode V2Evan Quan
Forcing clock level is supported under manual dpm mode only. Error out when trying to set under manual mode. Instead of doing nothing and reporting success. V2: update for mclk/pcie clock level settings also Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-12drm/amd/powerplay: hint when power profile setting is not supportedEvan Quan
Give user some hints when the power profile setting is not supported. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-10drm/amdgpu: Remove amdgpu_ucode_fini_boRex Zhu
The variable clean is unnecessary. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09drm/amd/pp: Implement load_firmware interfaceRex Zhu
with this interface, gfx/sdma can be initialized before smu. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09drm/amd/pp: Allocate ucode bo in request_smu_load_fwRex Zhu
ucode bo is needed by request_smu_load_fw, the request_smu_load_fw maybe called by gfx/sdma before smu hw init. so move amdgpu_ucode_bo_init to request_smu_lowd_fw from smu hw init. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09drm/amd/pp: Fix memory leak on CI/AIRex Zhu
On CI/AI, fw was not loaded by smu, but smu's fw still need to be released when driver fini. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09drm/amdgpu: Add fan RPM setting via sysfsRex Zhu
Add fan1_target for get/set fan speed in RPM unit Add fan1_min/fan1_max for get min, max fan speed in RPM unit Add fan1_enable to enable/disable the fan1 sensor v3: drop the hardcode value of min/max rpm in comments pointed out by Alex. v2: query the min/max rpm gpu support instand of hardcode value. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09drm/amd/pp: Implement AMDGPU_PP_SENSOR_MIN/MAX_FAN_RPMRex Zhu
so user can query the RPM range Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09drm/amd/pp: Expose the smu support for SDMA PG cntlRex Zhu
SDMA IP can be power up/down via smu message Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09drm/amd/powerplay: helper interfaces for MGPU fan boost featureEvan Quan
MGPU fan boost feature is enabled only when two or more dGPUs in the system. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/pp: Add ACP PG support in SMURex Zhu
when ACP block not enabled, we power off acp block to save power. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-20drm/amd/pp: Set Max clock level to display by defaultRex Zhu
avoid the error in dmesg: [drm:dm_pp_get_static_clocks] *ERROR* DM_PPLIB: invalid powerlevel state: 0! Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-10drm/amd/pp: fix semicolon.cocci warningskbuild test robot
drivers/gpu/drm/amd/amdgpu/../powerplay/amd_powerplay.c:1209:17-18: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: ea870e44415a ("drm/amd/pp: Export notify_smu_enable_pwe to display") CC: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/pp: Export notify_smu_enable_pwe to displayRex Zhu
Display can notify smu to enable pwe after gpu suspend. It is used in case when display resumes from S3 and wants to start audio driver by enabling pwe Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/pp: Refine the interface exported to displayRex Zhu
use void * as function parameter type in order for extension. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amdgpu: Add gfx_off support in smu through pp_set_powergating_by_smuRex Zhu
we can take gfx off feature as gfx power gate. gfx off feature is also controled by smu. so add gfx_off support in pp_set_powergating_by_smu. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/pp: Add gfx pg support in smu through set_powergating_by_smuRex Zhu
gfx ip block can call set_powergating_by_smu to set gfx pg state if necessary. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/pp: Unify powergate_uvd/vce/mmhub to set_powergating_by_smuRex Zhu
Some HW ip blocks need call SMU to enter/leave power gate state. So export common set_powergating_by_smu interface. 1. keep consistent with set_clockgating_by_smu 2. scales easily to powergate other ip(gfx) if necessary Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/pp: Rename enable_per_cu_power_gating to powergate_gfxRex Zhu
keep consistent with powergate_uvd/vce/mmhub Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amdgpu: Rename set_mmhub_powergating_by_smu to powergate_mmhubRex Zhu
In order to keep consistent with powergate_uvd/vce. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-13drm/amd/powerplay: remove uncessary extra gfxoff control callEvan Quan
Gfxoff is already enabled in amdgpu_device_ip_set_powergating_state. So, no need to enable it again in pp_late_init. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-13drm/amd/powerplay: fix missed hwmgr check warning before call ↵Huang Rui
gfx_off_control handler Patch 9667849bbb8d: "drm/amd/powerplay: add control gfxoff enabling in late init" from Mar 13, 2018, leads to the following static checker warning: drivers/gpu/drm/amd/amdgpu/../powerplay/amd_powerplay.c:194 pp_late_init() error: we previously assumed 'hwmgr' could be null (see line 185) drivers/gpu/drm/amd/amdgpu/../powerplay/amd_powerplay.c This patch fixes the warning to add hwmgr checking. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-06-13drm/amdgpu: fix CG enabling hang with gfxoff enabledHuang Rui
After defer the execution of clockgating enabling, at that time, gfx already enter into "off" state. Howerver, clockgating enabling will use MMIO to access the gfx registers, then get the gfx hung. So here we should move the gfx powergating and gfxoff enabling behavior at the end of initialization behind clockgating. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-15drm/amd/powerplay: add control gfxoff enabling in late initHuang Rui
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-15drm/amdgpu: use pp_feature member to store the maskHuang Rui
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-15drm/amd/powerplay: enable/disable gfxoff through smuHuang Rui
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-15drm/amd/pp: Remove dead interfaceRex Zhu
Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-22 12:43:51 +0000