aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc/inc/hw
AgeCommit message (Collapse)Author
2020-06-03drm/amd/display: Use cursor locking to prevent flip delaysAric Cyr
[ Upstream commit b2a7b0ce0773bfa4406bc0a78e41979532a1edd7 ] [Why] Current locking scheme for cursor can result in a flip missing its vsync, deferring it for one or more vsyncs. Result is a potential for stuttering when cursor is moved. [How] Use cursor update lock so that flips are not blocked while cursor is being programmed. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-16drm/amd/display: Only program surface flip for video plane via dmcubYongqiang Sun
Only need to do surface flip for video plane via dmcub. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: make PSR static screen entry within 30 msAnthony Koo
[Why] With different refresh rate panels, the PSR entry/exit time is different since it is dependent on 2 frame entry time today [How] Make static screen num frame entry time to be calculated such that entry time is within 30 ms instead of fixed num frames. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: Fix double buffering in dcn2 ICSCNoah Abradjian
[Why] When rapidly adjusting video brightness, screen tearing was observed. This was due to overwritten values in ICSC registers. In dcn10, this issue had been fixed by implementing double buffering via alternating ICSC modes. However, the second register set used in dcn1 doesn't exist in dcn2. [How] Create new program_input_csc for dcn20. Use ICSC_B registers instead of COMA registers as second set. Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amd/display: Add warmup escape call supportCharlene Liu
Add warmup escape support, for diags, in a way that is possible to choose a new or an existing sequence. For achieving this goal, this commit adds separated MCIF buffer as VCN request. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amd/display: update chroma viewport waEric Yang
[Why] Need previously implemented chroma vp wa to work for rotation cases. [How] Implement rotation specific wa. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-05drm/amd/display: Disable chroma viewport w/a when rotated 180 degreesMichael Strauss
[WHY] Previous Renoir chroma viewport workaround fixed an MPO flicker by increasing the chroma viewport size. However, when the MPO plane is rotated 180 degrees, the viewport is read in reverse. Since the workaround increases viewport size, when reading in reverse it causes a vertical chroma offset. [HOW] Pass rotation value to viewport set functions Temporarily disable the chroma viewport w/a when hubp is rotated 180 degrees Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-05drm/amd/display: fix dprefclk and ss percentage reading on RNEric Yang
[Why] Before was using HW counter value to determine the dprefclk. Which take into account ss, but has large variation, not good enough for generating audio dto. Also, the bios parser code to get the ss percentage was not working. [How] After this change, dprefclk is hard coded, same as on RV. We don't expect this to change on Renoir. Modified bios parser code to get the right ss percentage. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-05drm/amd/display: update sr and pstate latencies for RenoirEric Yang
[Why] DF team has produced more optimized latency numbers. [How] Add sr latencies to the wm table, use different latencies for different wm sets. Also fix bb override from registery key for these latencies. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: DML Validation Dump/Check with LoggingJaehyun Chung
[Why] Need validation that we are programming the expected values (rq, ttu, dlg) from DML. This debug feature will output logs if we are programming incorrect values and may help differentiate DAL issues from HW issues. [How] Dump relevant registers for each pipe with active stream. Compare current reg values with the converted DML output. Log mismatches when found. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: add color space option when sending link test patternWenjing Liu
[why] In the TEST_MSIC dpcd register field definition, the test equipment has the option to choose between YCbCr601 or YCbCr709. We will apply corresponding YCbCr coefficient based on this test request. [how] Add a new input parameter in dc_link_dp_set_test_pattern to allow the selection between different color space. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: rename DCN1_0 kconfig to DCNBhawanpreet Lakha
Since dcn20 and dcn21 are under dcn1 it doesnt make sense to have it named dcn1. Change it to "dcn" to make it generic Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_1 flagBhawanpreet Lakha
[Why] DCN21 is stable enough to be build by default. So drop the flags. [How] Remove them using the unifdef tool. The following commands were executed in sequence: $ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DCN2_1 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_1 '{}' ';' $ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DCN2_1 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_1 '{}' ';' In addition: * Remove from kconfig, and replace any dependencies with DCN1_0. * Remove from any makefiles. * Fix and cleanup Renoir definitions in dal_asic_id.h * Expand DCN1 ifdef to include DCN21 code in the following files: * clk_mgr/clk_mgr.c: dc_clk_mgr_create() * core/dc_resources.c: dc_create_resource_pool() * gpio/hw_factory.c: dal_hw_factory_init() * gpio/hw_translate.c: dal_hw_translate_init() Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_0 and DSC_SUPPORTEDBhawanpreet Lakha
[Why] DCN2 and DSC are stable enough to be build by default. So drop the flags. [How] Remove them using the unifdef tool. The following commands were executed in sequence: $ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' $ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' In addition: * Remove from kconfig, and replace any dependencies with DCN1_0. * Remove from any makefiles. * Fix and cleanup NV defninitions in dal_asic_id.h * Expand DCN1 ifdef to include DCN2 code in the following files: * clk_mgr/clk_mgr.c: dc_clk_mgr_create() * core/dc_resources.c: dc_create_resource_pool() * dce/dce_dmcu.c: dcn20_*lock_phy() * dce/dce_dmcu.c: dcn20_funcs * dce/dce_dmcu.c: dcn20_dmcu_create() * gpio/hw_factory.c: dal_hw_factory_init() * gpio/hw_translate.c: dal_hw_translate_init() Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: Add some hardware status in DTN log debugfsLeo (Hanghong) Ma
[Why] For debug purpose, we need to check the following hardware status in DTN log debugfs: 1.dpp & hubp clock enable; 2.crtc blank enable; 3.link phy status; [How] Add the upper information in the amdgpu_dm_dtn_log debugfs. For CRTC blanked status, since DCN2 and greater reports it on the OPP instead of OTG, we patch it in after calling optc1_read_otg_states. Ideally, this should be done in the DCN version specific function hooks. It has been left as a TODO item. Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: set MSA MISC1 bit 6 while sending colorimetry in VSC SDPAnthony Koo
[Why] It is confusing to sinks if we send VSC SDP only on some format. Today we signal colorimetry format using MSA while in formats like sRGB. But when we switch to BT2020 we set the bit to ignore MSA colorimetry and instead use the colorimetry information in the VSC SDP. But if sink supports signaling of colorimetry via VSC SDP we should always set the MSA MISC1 bit 6, instead of doing so selectively. [How] If sink supports signaling of colorimetry via VSC SDP, and we are sending the colorimetry info via VSC SDP with packet revision 05h, then always set MSA MISC1 bit 6. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: Change dmcu init sequence for dmcub loading dmcu FW.Yongqiang Sun
[Why] DMCU isn't intiliazed properly by dmcub loading due to dmcub initialize sequence. [How] Change dmcu init sequece to meet dmcub initilize. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: move wm ranges reporting to end of init hwEric Yang
[Why] SMU does not keep the wm table across S3, S4, need to re-send the table. Also defer sending the cable to after DCN bave initialized [How] Send table at end of init hw Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: move dispclk vco freq to clk mgr baseDmytro Laktyushkin
This value will be needed by dml and therefore should be externally accessible. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-17drm/amd/display: Temporary workaround to toggle watermark settingLewis Huang
[Why] Watermarks not propagated to DCHUBP after it is powered on [How] Add temoprary function apply_DEDCN21_147_wa to apply wm settings for Renoir Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-17drm/amd/display: add REFCYC_PER_TRIP_TO_MEMORY programmingBhawanpreet Lakha
it allows us to do urgent latency programming Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-17drm/amd/display: configurable aux timeout supportabdoulaye berthe
[Description] 1-add configurable timeout support to aux engine. 2-add timeout support field to dc_caps 3-add reg_key to override extended timeout support Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: add renoir specific watermark range and clk helperDmytro Laktyushkin
Doing this allows us to split it for diffrent asics. This design will be helpful for future Asciis. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: use vbios message to call smu for dpm levelCharlene Liu
[Description] use vbios message to call smu for dpm level also only program dmdata in vsyncflip as HW requirement. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: add more checks to validate seamless boot timingMartin Leung
[why] we found using an active DP to HDMI panel that we weren't validating dp_pixel_format and hardware timing v_front_porch, causing screen to blank and/or corrupt while attempting a seamless boot. [how] added checks during dc_validate_seamless_boot_timing for these values Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: exit PSR during detectionEric Yang
[Why] If 48mhz refclk is turned off during PSR, we will have issue doing link training during detection. [How] Get out of PSR before detection Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Restore should_update_pstate_support after bad revertJoshua Aberback
[Why] This function was mistakenly reverted as part of a legitimate revert. The old version that was reverted to has bad logic, and is causing situations where p-state change support is being toggled when it shouldn't be, resulting in hangs. Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: check phy dpalt lane count configLewis Huang
[Why] Type-c PHY config is not align with dpcd lane count. When those values didn't match, it cause driver do link training with 4 lane but phy only can output 2 lane. The link trainig always fail. [How] 1. Modify get_max_link_cap function. According DPALT_DP4 to update max lane count. 2. Add dp_mst_verify_link_cap to handle MST case because we didn't call dp_mst_verify_link_cap for MST case. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: add explicit comparator as default optimization checkJun Lei
[why] memcmp is vulnerable to regression due to dc_clocks structures not being organized properly (not "current" clock related structures being at the beginning of the structure) and causes unnecessary setting of the optimize bit [how] add a dcn sepcific comparator, implement for dcn2 Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Added pixel dynamic expansion control.Robin Singh
[Why] To compare the crc of the framebuffer data at input of display pipeline with the crc of the otg, we need to disable pixel formatter's dynamic expansion feature during crc capture and keep it enable in the normal operation. [HOW] Expose a new interface in DM and dc for pixel formatter (fmt dynamic bitdepth expansion control). Interface control the FMT_DYNAMIC_EXP_EN bit, during crc capture keep it disabled. Signed-off-by: Robin Singh <robin.singh@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: Revert fixup DPP programming sequenceWesley Chalmers
[WHY] This change was made because DTO programming was double-buffered, which is itself an issue. After deactivating the DTO double buffer, this change becomes unnecessary. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: Isolate DSC module from driver dependenciesBayan Zabihiyan
[Why] Edid Utility wishes to include DSC module from driver instead of doing it's own logic which will need to be updated every time someone modifies the driver logic. [How] Modify some functions such that we dont need to pass the entire DC structure as parameter. -Remove DC inclusion from module. -Filter out problematic types and inclusions Signed-off-by: Bayan Zabihiyan <bayan.zabihiyan@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: add dcn21 core DC changesBhawanpreet Lakha
Add missing parameters, to make dcn21 compile without errors Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Add Renoir clock managerBhawanpreet Lakha
Controls display clocks and interfaces with powerplay for clock and power requirements. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: Expose OTG_V_TOTAL_MID for HW DiagsBayan Zabihiyan
[Why] Existing HW Features, HW Diags test requested that the registers be exposed. [How] Add V_TOTAL_MID to existing DC structures. Make sure values are passed down throughout DC Add Register definition. Program the additional registers Add additional Logic for V_TOTAL_CONTROL. Signed-off-by: Bayan Zabihiyan <bayan.zabihiyan@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: set av_mute in hw_init for HDMICharlene Liu
[Description] OS will reserve HW state in UEFI mode. Driver init_hw reset to RGB which caused HDMI green in YCbCr mode. read HW blank_color based on acc_mode. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: add Cursor Degamma logic for DCN2Bayan Zabihiyan
[Why] We need to have the ability to to tell us set degamma on the cursor. [How] Pass a flag down to register programming that tells us if the current surface format needs cursor degamma. Signed-off-by: Bayan Zabihiyan <bayan.zabihiyan@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: remove unused functionQingqing Zhuo
[Why] This function is not being used, it was left in when introducing DCN2 [How] Remove the function Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: Add VM page fault handle implementationJaehyun Chung
[How] Allocate memory for default page and program memory block addr into default page addr register. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: re structure odm to allow 4 to 1 supportDmytro Laktyushkin
Currently odm is handled using top_bottom pipe by special casing the differing opps to differentiate from mpc combine. Since top/bottom pipe list was made to track mpc muxing this creates difficulties in adding a 4 pipe odm case support. Rather than continue using mpc combine list, this change reworks odm to use it's own linked list to keep track of odm combine pipes. This also opens up options for using mpo with odm, if a practical use case is ever found. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-22Revert "drm/amd/display: add global master update lock for DCN2"David Francis
This reverts commit 6c5be4ac630805d3a3b20157a0c6421ef815fe78. This commit was accidentally promoted twice Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Remove redundant definition of dwb_source enumsJulian Parkin
There are repeated (but guarded) definitions of dwb_src enums. There are also unused entires. Clean them up. Signed-off-by: Julian Parkin <julian.parkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Add enum for H-timing divider modeQingqing Zhuo
Add h_timing_div_mode enum to better reflect possible register values. Replace previously programmed values with enum Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: wake up ogam mem pwr before programming ocscCharlene Liu
[Description] OGAM_MEM_PWR could stay in light up when driver woke up to update gamma. either disable MEM_LOW power feature or set to OGAM_bypass could make artificial color distortion goes away. Easy reproduce after LOW_MEM Power feature enables and resume from S3. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Julian Parkin <jparkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Enable type C hotplugEric Yang
[Why and How] We want to change where timing is done for alt mode. Some of the commented out #ifs are needed for DCN20 so we enable them for that case. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: HUBP/HUBBUB register programming fixesIlya Bakoulin
[Why] - Need to change interface function signature / add an enum to reflect the available register field values [How] - Add a new enum and modify existing functions to use it instead of bool Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: update optc odm interface for more than 2 oppsDmytro Laktyushkin
Current optc odm interface only accepts 2 opps, we need to expand this to allow 4 to 1 odm combine. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Remove duplicate interface for programming FBJulian Parkin
[Why] There are currently two interfaces for exactly the same thing: hupb_update_dchub in hupb and update_dchub in hubbub. The hubbub version is currently unused past dcn10, largely because the call from the dcn10 hardware sequencer does not call through the interface, so the hupb interface was used instead. This is confusing because of the duplicate code, the unused functions, and the fact that more that one block currently owns this set of registers. [How] Remove the hubp interface entirely, as well as the register declarations that are not longer needed because of this. Change the call site to always call the hubbub version through the interface. Fix the update_dchub function in dcn20_hubbub.c to program the correct registers for dcn20. Signed-off-by: Julian Parkin <julian.parkin@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Set DSC before DIG front-end is connected to its back-endNikola Cornij
[why] At the time DIG FE is connected to its BE, the clocks in OTG are enabled and PHY will also be set up. When DSC has to be used to fit the stream into the available bandwidth, without DSC being set DIG could get exposed to the higer bandwidth it (or link) could handle. This causes the HW to "reject" video enable setup (the register shows that video enable was attempted, but the status bit shows it as disabled). [how] - Separate DSC setup into DSC register config and DSC PPS SDP setup - Move most of the DSC setup (register config) to before dcn10_link_encoder_connect_dig_be_to_fe() is called - Set up DSC PPS SDP after DIG FE is connected to its BE. This is because setting DSC PPS SDP before that has no effect. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: enabling seamless boot sequence for dcn2Martin Leung
[Why] Seamless boot (building SW state inheriting BIOS-initialized timing) was enabled on DCN2, including fixes [How] Includes fixes for MPC, DPPCLK, and DIG FE mapping/OTG source select/ Pixel clock. This is part 2 of 2 for seamless boot NV10 Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-30 04:43:25 +0000