aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc/dce80
AgeCommit message (Collapse)Author
2019-12-05drm/amd/display: add separate of private hwss functionsAnthony Koo
[Why] Some function pointers in the hwss function pointer table are meant to be hw sequencer entry points to be called from dc. However some of those function pointers are not meant to be entry points, but instead used as a code reuse/inheritance tool called directly by other hwss functions, not by dc. Therefore, we want a more clear separation of which functions we determine to be interface functions vs the functions we use within hwss. [How] DC interface functions will be stored in: struct hw_sequencer_funcs Functions used within HWSS will be stored in: struct hwseq_private_funcs Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: cleanup of construct and destruct funcsAnthony Koo
[Why] Too many construct functions which makes searching difficult, especially on some debuggers. [How] Append all construct and destruct functions with dcn number and object type to make each construct function name unique Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: map TRANSMITTER_UNIPHY_x to LINK_REGS_xYogesh Mohan Marimuthu
[Why] The enum value for TRANSMITTER_UNIPHY_G is 9. In resource dc_xx_resource file structure link_enc_regs[], the TRANSMITTER_UNIPHY_G registers are initialized at index 6. Due to this mismatch, if monitor is attached to port using TRANSMITTER_UNIPHY_G then the monitor blanks out. [How] add function map_transmitter_id_to_phy_instance() and use the function to map enum transmitter to link regs. Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-17drm/amd/display: configurable aux timeout supportabdoulaye berthe
[Description] 1-add configurable timeout support to aux engine. 2-add timeout support field to dc_caps 3-add reg_key to override extended timeout support Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-17drm/amd/display: update register field access mechanismabdoulaye berthe
1-add timeout length and multiplier fields to aux_control1 register 2-update access mechanism from macro constructed name to uint32_t defined addresses. 3-define registers and field per asic family Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amd/display: memory leakNavid Emamdoost
In dcn*_clock_source_create when dcn20_clk_src_construct fails allocated clk_src needs release. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: make firmware info only load once during dc_bios createDmytro Laktyushkin
Currently every time DC wants to access firmware info we make a call into VBIOS. This makes no sense as there is nothing that can change runtime inside fw info and can cause issues when calling unstable bios during bringup. This change eliminate this behavior by only calling bios once for fw info and keeping it stored as part of dc_bios. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-12drm/amd/display: Fix a typo - dce_aduio_mask --> dce_audio_maskChristophe JAILLET
This should be 'dce_audio_mask', not 'dce_aduio_mask'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-14Merge tag 'drm-misc-next-2019-06-14' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.3: UAPI Changes: Cross-subsystem Changes: - Add code to signal all dma-fences when freed with pending signals. - Annotate reservation object access in CONFIG_DEBUG_MUTEXES Core Changes: - Assorted documentation fixes. - Use irqsave/restore spinlock to add crc entry. - Move code around to drm_client, for internal modeset clients. - Make drm_crtc.h and drm_debugfs.h self-contained. - Remove drm_fb_helper_connector. - Add bootsplash to todo. - Fix lock ordering in pan_display_legacy. - Support pinning buffers to current location in gem-vram. - Remove the now unused locking functions from gem-vram. - Remove the now unused kmap-object argument from vram helpers. - Stop checking return value of debugfs_create. - Add atomic encoder enable/disable helpers. - pass drm_atomic_state to atomic connector check. - Add atomic support for bridge enable/disable. - Add self refresh helpers to core. Driver Changes: - Add extra delay to make MTP SDM845 work. - Small fixes to virtio, vkms, sii902x, sii9234, ast, mcde, analogix, rockchip. - Add zpos and ?BGR8888 support to meson. - More removals of drm_os_linux and drmP headers for amd, radeon, sti, r128, r128, savage, sis. - Allow synopsis to unwedge the i2c hdmi bus. - Add orientation quirks for GPD panels. - Edid cleanups and fixing handling for edid < 1.2. - Add runtime pm to stm. - Handle s/r in dw-hdmi. - Add hooks for power on/off to dsi for stm. - Remove virtio dirty tracking code, done in drm core. - Rework BO handling in ast and mgag200. Tiny conflict in drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c, needed #include <linux/slab.h> to make it compile. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0e01de30-9797-853c-732f-4a5bd6e61445@linux.intel.com
2019-06-10drm/amd: drop use of drmp.h in os_types.hSam Ravnborg
Drop use of the deprecated drmP.h from display/dc/os_types.h Fix all fallout after this change. Most of the fixes was adding a missing include of vmalloc.h. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-4-sam@ravnborg.org
2019-05-31drm/amd/display: make clk mgr soc specificEric Yang
[Why] First step of refactoring clk mgr to better handle different ways of handling clock operations. Clock operation policies are soc specific and not just DCN vesion specific. It is not a hw resource, should not be in the resource pool. [How] Change clock manager creation to be based on HW internal ID, rename clock manager members to be more clear. Move clock manager out of resource. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Engine-specific encoder allocationWesley Chalmers
[WHY] From DCE110 onward, we have the ability to assign DIG BE and FE separately for any display connector type; before, we could only do this for DP. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: stop external access to internal optc sync paramsDmytro Laktyushkin
These are internal otg params and should be handled as such. Thich change passes the params as function arguments. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-15drm/amd/display: Add fast_validate parameterJoshua Aberback
Add a fast_validate parameter in dc_validate_global_state for future use Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-15drm/amd/display: expand plane caps to include fp16 and scaling capabilityJun Lei
[why] there are some scaling capabilities such as fp16 which are known to be unsupported on a given ASIC. exposing these static capabilities allows much simpler implementation for OS interfaces which require to report such static capabilities to reduce the number of dynamic validation calls [how] refactor the existing plane caps to be more extensible, and add fp16 and scaling capabilities Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-03drm/amd/display: Fix multi-thread writing to 1 stateAidan Wood
[Why] Multiple threads were writing back to one global VBA in DC resulting in multiple threads overwriting eachother's data [How] Add an instance of DML (which contains VBA) to each context and change all calls that used dc->dml to use context->dml. Created a seperate copy constructor for linux in a case where there is no access to DC. Signed-off-by: Aidan Wood <Aidan.Wood@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-03Merge branch 'drm-next-5.2' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next amdgpu: - Switch to HMM for userptr (reverted until HMM fixes land) - New experimental SMU 11 replacement for powerplay for vega20 (not enabled by default) - Initial RAS support for vega20 - BACO support for vega12 - BACO fixes for vega20 - Rework IH handling for page fault and retry interrupts - Cleanly split CPU and GPU paths for GPUVM updates - Powerplay fixes - XGMI fixes - Rework how DC interacts with atomic for planes - Clean up and simplify DC/Powerplay interfaces - Misc cleanups and bug fixes amdkfd: - Switch to HMM for userptr (reverted until HMM fixes land) - Add initial RAS support - MQD fixes ttm: - Unify DRM_FILE_PAGE_OFFSET handling - Account for kernel allocations in kernel zone only - Misc cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190402170820.22197-1-alexander.deucher@amd.com
2019-03-19drm/amd/display: Add plane capabilities to dc_capsNicholas Kazlauskas
[Why] The current dc_caps doesn't provide the information needed to determine the count and type of each plane to be exposed to userspace. There are three types of DRM planes that are exposed to userspace: 1. Primary planes (can be used for modesetting) 2. Overlay planes (can be blended below or above a primary plane) 3. Cursor planes (blended topmost) We need to know the number and type of each in amdgpu_dm to expose to userspace. Hardware supports blending planes below, above or both ways depending on the ASIC. Alpha support is also ASIC dependent. Some hardware has dedicated pipes for overlays and other hardware combines the pipes. All of this should be exposed in a way that DM can query and use. [How] Introduce the dc_plane_cap structure that describes the capabilities for the hw planes. It describes: - the type of the plane - whether the plane can blend with planes below it - whether the plane can blend with planes above it - whether the plane supports per pixel alpha blending - supported formats on the plane (partial list for now) Pre DCN ASICs don't have their full capabilities described for now. They can be updated as needed in the future. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-04Merge v5.0 into drm-nextDave Airlie
There is a really hairy resolution involving amdgpu fixes, that I'd rather confirm here. Also some misc fixes are landed by me, but the pr has them as well. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-02-20drm/amd/display: set clocks to 0 on suspend on dce80Bhawanpreet Lakha
[Why] When a dce80 asic was suspended, the clocks were not set to 0. Upon resume, the new clock was compared to the existing clock, they were found to be the same, and so the clock was not set. This resulted in a blackscreen. [How] In atomic commit, check to see if there are any active pipes. If no, set clocks to 0 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-02-20drm/amd/display: fix optimize_bandwidth func pointer for dce80Bhawanpreet Lakha
[Why] optimize_bandwidth was using dce100_prepare_bandwidth this is incorrect [How] change it to dce100_optimize_bandwidth Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-01-25drm/amd/display: fix eDP fast bootup for pre-raven asichersen wu
[Why] For fastboot, Bios will light up eDP before SW driver is loaded. SW driver will check if eDP is lit by bios through reading the BIOS_SCRATCH_3 register. If lit, SW driver will not power down eDP power and phy to save time. Definition of BIOS_SCRATCH_3 are missing for pre-raven asic. This causes eDP fast boot to not work property. For some eDP panels, even if dp tx sends NoVideoStream_flag =1 and dpcd 0x600=2, eDP rx may not handle properly. This may cause a short flash on screen. [How] Add definition of BIOS_SCRATCH_3 for all asic Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Yongqiang Sun <yongqiang.sun@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Change from aux_engine to dce_auxDavid Francis
[Why] The aux_engine struct is needlessly complex and is defined multiple times. It contains function pointers that each have only one version and are called only from inside dce_aux. [How] Replace aux_engine with a new struct called dce_aux. Remove all function pointers and call functions directly. Remove unused functions Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Fix 64-bit division for 32-bit buildsKen Chalmers
[Why] 32-bit builds break when doing 64-bit division directly. [How] Use the div_u64() function instead to perform the division. Fixes: https://lists.freedesktop.org/archives/dri-devel/2018-December/201008.html Signed-off-by: Ken Chalmers <ken.chalmers@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Use 100 Hz precision for pipe pixel clocksKen Chalmers
[Why] Users would like more accurate pixel clocks, especially for fractional "TV" frame rates like 59.94 Hz. [How] Store and communicate pixel clocks with 100 Hz accuracy from dc_crtc_timing through to BIOS command table setpixelclock call. Signed-off-by: Ken Chalmers <ken.chalmers@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26drm/amd/display: Remove duplicate headerBrajeswar Ghosh
Remove dce/dce_mem_input.h which is included more than once Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: rename dccg to clk_mgrDmytro Laktyushkin
In preparation for adding the actual dccg block since the current implementation of dccg is mor eof a clock manager than a hw block Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: split dccg clock manager into asic foldersDmytro Laktyushkin
Currently dccg contains code related to every dcn revision in a single file. This change splits out the dcn parts of code into correct folders Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: clean up base dccg structDmytro Laktyushkin
Move things not accessed outside dccg block into dce specific struct Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: remove safe_to_lower flag from dc, use 2 functions insteadDmytro Laktyushkin
This is done to keep things more readable, avoids a true/false flag in dc interface layer. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: move pplib/smu notification to dccg blockDmytro Laktyushkin
This is done to clear up the clock programming sequence since the only time we need to notify pplib is after clock update. This also renames the clk block to dccg, at the moment this block contains both clock management and dccg functionality. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09drm/amd/display: fix memory leak in resource poolsJun Lei
[why] ddc engines were recently changed to be independently tracked from pipe count. the change was reflected in resource constructor but not in destructor. this manifests as a memory leak when pipe harvesting is enabled, since not all constructed ddc engines are freed [how] make destructor symmetric with constructor for all dcX_resource Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09drm/amd/display: clean up encoding checksEric Yang
[Why] All ASICS we support has YCbCr support, so the check is unnecessary, the currently logic in validate output also returns true all the time, so the unneccessary logic is removed Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: num of sw i2c/aux engines less than num of connectorsHersen Wu
[why] AMD Stoney reference board, there are only 2 pipes (not include underlay), and 3 connectors. resource creation, only 2 I2C/AUX engines are created. Within dc_link_aux_transfer, when pin_data_en =2, refer to enengines[ddc_pin->pin_data->en] = NULL. NULL point is referred later causing system crash. [how] each asic design has fixed number of ddc engines at hw side. for each ddc engine, create its i2x/aux engine at sw side. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amd/display: Create new i2c resourceDavid Francis
[Why] I2C code did not match dc resource model and was generally unpleasant [How] Move code into new svelte dce_i2c files, replacing various i2c objects with two structs: dce_i2c_sw and dce_i2c_hw. Fully split sw and hw code paths. Remove all redundant declarations. Use address lists to distinguish between versions. Change dce80 code to newer register access macros. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-06drm/amd/display: Don't share clk source between DP and HDMIMikita Lipski
[why] Prevent clock source sharing between HDMI and DP connectors. DP shouldn't be sharing its ref clock with phy clock, which caused an issue of older ASICS booting up with multiple diplays plugged in. [how] Add an extra check that would prevent HDMI and DP sharing clk. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-07-27drm/amd/display: flatten aux_engine and engineBhawanpreet Lakha
[Why] engine and aux_engine are unnecessary layers we want to remove this layer. [How] flatten engine and aux engine structs into one struct called aux_engine and remove all references to the engine struct. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-24drm/amd/display: Decouple aux from i2cBhawanpreet Lakha
[Why] Aux engine is created from i2caux layer. We want to remove this layer and use the engine directly. [How] Decouple aux engine from i2caux. Move aux engine related code to dce folder and use dc resource pool to manage the engine. And use the engine functions directly Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/display: rename dce_disp_clk to dccgDmytro Laktyushkin
No functional change. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/display: rename display clock block to dccgDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-11drm/amd/display: drop dc_validate_guaranteedJulian Parkin
Block FP16 scaling in validate_resources codepath. Signed-off-by: Julian Parkin <jparkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14drm/amd/display: Enable backlight support for pre-DCE11 ASICsMikita Lipski
Initializing ABM and DMCU modules for dce 80/81/83/100 as in DCE110 Adding constructors and destructors for each module. Adding register list for DMCU in dce80 as some registers are missing in dce80 from the basic list. DMCU is never used, so it would not have any functional impact. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Expose DCE110 CRC functions for DCE8Leo (Sunpeng) Li
Implement CRC for DCE8. Registers remain the same, so call DCE110 code directly. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Make couple functions in DCE80 TG staticHarry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Re-use DCE100 display_power_gating for DCE80Harry Wentland
Both functions are the same Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Remove unused DCE80 compressorHarry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Add timing generator count to resource pool.Yongqiang Sun
Use tg count in resource pool for further reference. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Don't allow dual-link DVI on all ASICs.Harry Wentland
Our APUs (Carrizo, Stoney, Raven) don't support it. v2: Don't use is_apu as other ASICs might also not support it Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-19BackMerge tag 'v4.15-rc4' into drm-nextDave Airlie
Linux 4.15-rc4 Daniel requested it to fix some messy conflicts.
2017-12-04drm/amd/display: Add APU cap in dc_capsAnthony Koo
Some features should only be enabled on APUs or should not be enabled on APUs. Signed-off-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>