summaryrefslogtreecommitdiffstats
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2020-06-26Merge tag 'gpio-fixes-for-v5.8-rc3' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes gpio fixes for v5.8-rc3 - several fixes for gpio-pca953x
2020-06-22gpio: pca953x: Fix GPIO resource leak on Intel Galileo Gen 2Andy Shevchenko
When adding a quirk for IRQ on Intel Galileo Gen 2 the commit ba8c90c61847 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2") missed GPIO resource release. We can safely do this in the same quirk, since IRQ will be locked by GPIO framework when requested and unlocked on freeing. Fixes: ba8c90c61847 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-06-16gpio: pca953x: disable regmap locking for automatic address incrementingAndy Shevchenko
It's a repetition of the commit aa58a21ae378 ("gpio: pca953x: disable regmap locking") which states the following: This driver uses its own locking but regmap silently uses a mutex for all operations too. Add the option to disable locking to the regmap config struct. Fixes: bcf41dc480b1 ("gpio: pca953x: fix handling of automatic address incrementing") Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-06-16gpio: pca953x: Fix direction setting when configure an IRQAndy Shevchenko
The commit 0f25fda840a9 ("gpio: pca953x: Zap ad-hoc reg_direction cache") seems inadvertently made a typo in pca953x_irq_bus_sync_unlock(). When the direction bit is 1 it means input, and the piece of code in question was looking for output ones that should be turned to inputs. Fix direction setting when configure an IRQ by injecting a bitmap complement operation. Fixes: 0f25fda840a9 ("gpio: pca953x: Zap ad-hoc reg_direction cache") Depends-on: 35d13d94893f ("gpio: pca953x: convert to use bitmap API") Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-06-16gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2Andy Shevchenko
ACPI table on Intel Galileo Gen 2 has wrong pin number for IRQ resource of one of the I²C GPIO expanders. Since we know what that number is and luckily have GPIO bases fixed for SoC's controllers, we may use a simple DMI quirk to match the platform and retrieve GpioInt() pin on it for the expander in question. Mika suggested the way to avoid a quirk in the GPIO ACPI library and here is the second, almost rewritten version of it. Fixes: f32517bf1ae0 ("gpio: pca953x: support ACPI devices found on Galileo Gen2") Depends-on: 25e3ef894eef ("gpio: acpi: Split out acpi_gpio_get_irq_resource() helper") Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-06-16gpio: pca953x: Synchronize interrupt handler properlyAndy Shevchenko
Since the commit aa58a21ae378 ("gpio: pca953x: disable regmap locking") the locking of regmap is disabled and that immediately introduces a synchronization issue. It's easy to see when we try to monitor more than one interrupt from the same chip. It seems that the problem exists from the day one and even commit 6e20fb18054c ("drivers/gpio/pca953x.c: add a mutex to fix race condition") missed this. Below are the traces and shell reproducers before and after proposed change. Note duplicates in the IRQ events. /proc/interrupts also shows a deviation, i.e. sum of children interrupts higher than parent's one. When locking is disabled for regmap and no protection in IRQ handler ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... gpioset-194 regmap_hw_write_start: i2c-INT3491:02 reg=2 count=1 irq/31-i2c-INT3-139 regmap_hw_read_start: i2c-INT3491:02 reg=4c count=2 gpioset-194 regmap_hw_write_done: i2c-INT3491:02 reg=2 count=1 gpioset-194 regmap_reg_read_cache: i2c-INT3491:02 reg=6 val=f5 gpioset-194 regmap_reg_write: i2c-INT3491:02 reg=6 val=f5 gpioset-194 regmap_hw_write_start: i2c-INT3491:02 reg=6 count=1 irq/31-i2c-INT3-139 regmap_hw_read_done: i2c-INT3491:02 reg=4c count=2 ... % gpiomon gpiochip3 0 & % gpioset gpiochip3 1=0 % gpioset gpiochip3 1=1 event: RISING EDGE offset: 0 timestamp: [ 302.782583765] % gpiomon gpiochip3 2 & % gpioset gpiochip3 1=0 event: RISING EDGE offset: 2 timestamp: [ 312.033148829] event: FALLING EDGE offset: 0 timestamp: [ 312.022757525] % gpioset gpiochip3 1=1 event: RISING EDGE offset: 2 timestamp: [ 316.201148473] event: RISING EDGE offset: 0 timestamp: [ 316.191759599] When locking is disabled for regmap and protection in IRQ handler ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... gpioset-202 regmap_hw_write_start: i2c-INT3491:02 reg=2 count=1 gpioset-202 regmap_hw_write_done: i2c-INT3491:02 reg=2 count=1 gpioset-202 regmap_reg_read_cache: i2c-INT3491:02 reg=6 val=fd gpioset-202 regmap_reg_write: i2c-INT3491:02 reg=6 val=fd gpioset-202 regmap_hw_write_start: i2c-INT3491:02 reg=6 count=1 gpioset-202 regmap_hw_write_done: i2c-INT3491:02 reg=6 count=1 irq/31-i2c-INT3-139 regmap_hw_read_start: i2c-INT3491:02 reg=4c count=2 irq/31-i2c-INT3-139 regmap_hw_read_done: i2c-INT3491:02 reg=4c count=2 ... % gpiomon gpiochip3 0 & % gpioset gpiochip3 1=0 event: FALLING EDGE offset: 0 timestamp: [ 531.330078107] % gpioset gpiochip3 1=1 event: RISING EDGE offset: 0 timestamp: [ 532.912239128] % gpiomon gpiochip3 2 & % gpioset gpiochip3 1=0 event: FALLING EDGE offset: 0 timestamp: [ 539.633669484] % gpioset gpiochip3 1=1 event: RISING EDGE offset: 0 timestamp: [ 542.256978461] Fixes: 6e20fb18054c ("drivers/gpio/pca953x.c: add a mutex to fix race condition") Depends-on: 35d13d94893f ("gpio: pca953x: convert to use bitmap API") Depends-on: 49427232764d ("gpio: pca953x: Perform basic regmap conversion") Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Roland Stigge <stigge@antcom.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-06-16gpio: arizona: put pm_runtime in case of failureNavid Emamdoost
Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count if pm_runtime_put is not called in error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200605030052.78235-1-navid.emamdoost@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-16gpio: arizona: handle pm_runtime_get_sync failure caseNavid Emamdoost
Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count. Call pm_runtime_put if pm_runtime_get_sync fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200605025207.65719-1-navid.emamdoost@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-07Merge tag 'usb-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY driver updates from Greg KH: "Here are the large set of USB and PHY driver updates for 5.8-rc1. Nothing huge, just lots of little things: - USB gadget fixes and additions all over the place - new PHY drivers - PHY driver fixes and updates - XHCI driver updates - musb driver updates - more USB-serial driver ids added - various USB quirks added - thunderbolt minor updates and fixes - typec updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits) usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings" Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180" Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver" USB: serial: ch341: fix lockup of devices with limited prescaler USB: serial: ch341: add basis for quirk detection CDC-ACM: heed quirk also in error handling USB: serial: option: add Telit LE910C1-EUX compositions usb: musb: Fix runtime PM imbalance on error usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle usb: musb: use true for 'use_dma' usb: musb: start session in resume for host port usb: musb: return -ESHUTDOWN in urb when three-strikes error happened USB: serial: qcserial: add DW5816e QDL support thunderbolt: Add trivial .shutdown usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML ...
2020-06-05Merge tag 'gpio-v5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.8 kernel cycle. Core changes: - A new GPIO aggregator driver has been merged: this can join a few select GPIO lines into a new aggregated GPIO chip. This can be used for security: a process can be granted access to only these lines, for example for industrial control. Another way to use this is to reexpose certain select lines to a virtual machine or container. - Warn if the gpio-line-names is too long in he DT parser core. - GPIO lines can now be looked up by line name in addition to being looked up by offset. New drivers: - A new generic regmap GPIO driver has been merged. Too many regmap drivers are starting to look like each other so we need to create some common ground and try to move drivers over to using that. - The F7188X driver now supports F81865. Driver improvements: - Large improvements to the PCA953x expander, get multiple lines and several cleanups. - Large improvements to the DesignWare DWAPB driver, and Sergey Semin has volunteered to maintain it. - PL061 can now be built as a module, this is part of a bigger effort to make the ARM platforms more modular" * tag 'gpio-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: pca953x: Drop unneeded ACPI_PTR() MAINTAINERS: Add gpio regmap section gpio: add a reusable generic gpio_chip using regmap gpiolib: Introduce gpiochip_irqchip_add_domain() gpio: gpiolib: Allow GPIO IRQs to lazy disable gpiolib: Separate GPIO_GET_LINEINFO_WATCH_IOCTL conditional gpio: rcar: Fix runtime PM imbalance on error gpio: pca935x: Allow IRQ support for driver built as a module gpio: pxa: Add COMPILE_TEST support dt-bindings: gpio: Add renesas,em-gio bindings MAINTAINERS: Fix file name for DesignWare GPIO DT schema gpio: dwapb: Remove unneeded has_irq member in struct dwapb_port_property gpio: dwapb: Don't use IRQ 0 as valid Linux interrupt gpio: dwapb: avoid error message for optional IRQ gpio: dwapb: Call acpi_gpiochip_free_interrupts() on GPIO chip de-registration gpio: max730x: bring gpiochip_add_data after port config MAINTAINERS: Add GPIO Aggregator section docs: gpio: Add GPIO Aggregator documentation gpio: Add GPIO Aggregator gpiolib: Add support for GPIO lookup by line name ...
2020-06-03Merge tag 'irq-core-2020-06-02' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The generic interrupt departement provides: - Cleanup of the irq_domain API - Overhaul of the interrupt chip simulator - The usual pile of new interrupt chip drivers - Cleanups, improvements and fixes all over the place" * tag 'irq-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) irqchip: Fix "Loongson HyperTransport Vector support" driver build on all non-MIPS platforms dt-bindings: interrupt-controller: Add Loongson PCH MSI irqchip: Add Loongson PCH MSI controller dt-bindings: interrupt-controller: Add Loongson PCH PIC irqchip: Add Loongson PCH PIC controller dt-bindings: interrupt-controller: Add Loongson HTVEC irqchip: Add Loongson HyperTransport Vector support genirq: Check irq_data_get_irq_chip() return value before use irqchip/sifive-plic: Improve boot prints for multiple PLIC instances irqchip/sifive-plic: Setup cpuhp once after boot CPU handler is present irqchip/sifive-plic: Set default irq affinity in plic_irqdomain_map() irqchip/gic-v2, v3: Drop extra IRQ_NOAUTOEN setting for (E)PPIs irqdomain: Allow software nodes for IRQ domain creation irqdomain: Get rid of special treatment for ACPI in __irq_domain_add() irqdomain: Make __irq_domain_add() less OF-dependent iio: dummy_evgen: Fix use after free on error in iio_dummy_evgen_create() irqchip/gic-v3-its: Balance initial LPI affinity across CPUs irqchip/gic-v3-its: Track LPI distribution on a per CPU basis genirq/irq_sim: Simplify the API irqdomain: Make irq_domain_reset_irq_data() available to non-hierarchical users ...
2020-06-03gpio: pca953x: Drop unneeded ACPI_PTR()Andy Shevchenko
ACPI_PTR() becomes a no-op when !CONFIG_ACPI. This is not needed since we always have ID table enabled. Moreover, in the mentioned case compiler will complain about defined but not used variable. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200520211916.25727-3-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-03gpio: add a reusable generic gpio_chip using regmapMichael Walle
There are quite a lot simple GPIO controller which are using regmap to access the hardware. This driver tries to be a base to unify existing code into one place. This won't cover everything but it should be a good starting point. It does not implement its own irq_chip because there is already a generic one for regmap based devices. Instead, the irq_chip will be instantiated in the parent driver and its irq domain will be associate to this driver. For now it consists of the usual registers, like set (and an optional clear) data register, an input register and direction registers. Out-of-the-box, it supports consecutive register mappings and mappings where the registers have gaps between them with a linear mapping between GPIO offset and bit position. For weirder mappings the user can register its own .xlate(). Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200528145845.31436-3-michael@walle.cc Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-03gpiolib: Introduce gpiochip_irqchip_add_domain()Michael Walle
The function connects an IRQ domain to a gpiochip and reuses gpiochip_to_irq() which is provided by gpiolib. gpiochip_irqchip_* and regmap_irq partially provide the same functionality. This function will help to connect just the minimal functionality of the gpiochip_irqchip which is needed to work together with regmap-irq. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200528145845.31436-2-michael@walle.cc Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-30Merge tag 'irqchip-5.8' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - A few new drivers for the Loongson MIPS platform (HTVEC, PIC, MSI) - A cleanup of the __irq_domain_add() API - A cleanup of the IRQ simulator to actually use some of the irq infrastructure - Some fixes for the Sifive PLIC when used in a multi-controller context - Fixes for the GICv3 ITS to spread interrupts according to the load of each CPU, and to honor managed interrupts - Numerous cleanups and documentation fixes
2020-05-29gpio: fix locking open drain IRQ linesLinus Walleij
We provided the right semantics on open drain lines being by definition output but incidentally the irq set up function would only allow IRQs on lines that were "not output". Fix the semantics to allow output open drain lines to be used for IRQs. Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Hans Verkuil <hverkuil@xs4all.nl> Cc: Russell King <linux@armlinux.org.uk> Cc: stable@vger.kernel.org # v5.3+ Link: https://lore.kernel.org/r/20200527140758.162280-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-28gpio: gpiolib: Allow GPIO IRQs to lazy disableMaulik Shah
With 'commit 461c1a7d4733 ("gpiolib: override irq_enable/disable")' gpiolib overrides irqchip's irq_enable and irq_disable callbacks. If irq_disable callback is implemented then genirq takes unlazy path to disable irq. Underlying irqchip may not want to implement irq_disable callback to lazy disable irq when client drivers invokes disable_irq(). By overriding irq_disable callback, gpiolib ends up always unlazy disabling IRQ. Allow gpiolib to lazy disable IRQs by overriding irq_disable callback only if irqchip implemented irq_disable. In cases where irq_disable is not implemented irq_mask is overridden. Similarly override irq_enable callback only if irqchip implemented irq_enable otherwise irq_unmask is overridden. Fixes: 461c1a7d4733 ("gpiolib: override irq_enable/disable") Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://lore.kernel.org/r/1590253873-11556-2-git-send-email-mkshah@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-27gpiolib: Separate GPIO_GET_LINEINFO_WATCH_IOCTL conditionalAndy Shevchenko
We already have two conditionals inside the outer one to check if the command is GPIO_GET_LINEINFO_WATCH_IOCTL. I think it's time to actually do what I have proposed in the first place, i.e. to separate GPIO_GET_LINEINFO_WATCH_IOCTL from GPIO_GET_LINEINFO_IOCTL. It's +13 LOCs, and surprisingly only +13 bytes of binary on x86_32, but for the price of much better readability. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200525194028.74236-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-27Merge tag 'v5.7-rc7' into develLinus Walleij
Linux 5.7-rc7
2020-05-27Merge tag 'gpio-updates-for-v5.8-part2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio: updates for v5.8 - part 2 - fix the initialization ordering in gpio-max730x - make gpio-pxa buildable for compile testing - make gpio-pca953x buildable as a module
2020-05-25gpio: rcar: Fix runtime PM imbalance on errorDinghao Liu
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20200522080839.32612-1-dinghao.liu@zju.edu.cn Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-25gpio: pca935x: Allow IRQ support for driver built as a moduleAndy Shevchenko
Perhaps by some historical reasons the IRQ support has been allowed only for built-in driver. However, there is nothing prevents us to build it as module an use as IRQ chip. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-05-25gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe()Tiezhu Yang
Propagate the error code returned by devm_platform_ioremap_resource() out of probe() instead of overwriting it. Fixes: 72d8cb715477 ("drivers: gpio: bcm-kona: use devm_platform_ioremap_resource()") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> [Bartosz: tweaked the commit message] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-05-25gpio: pxa: Add COMPILE_TEST supportTiezhu Yang
Add COMPILE_TEST support to the PXA GPIO driver for better compile testing coverage. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-05-25gpio: pxa: Fix return value of pxa_gpio_probe()Tiezhu Yang
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Fixes: 542c25b7a209 ("drivers: gpio: pxa: use devm_platform_ioremap_resource()") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-05-25gpio: mlxbf2: Fix sleeping while holding spinlockAxel Lin
mutex_lock() can sleep, don't call mutex_lock() while holding spin_lock. Fixes: bc0ae0e737f5 ("gpio: add driver for Mellanox BlueField 2 GPIO controller") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: asmaa@mellanox.com Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-05-25gpio: dwapb: Remove unneeded has_irq member in struct dwapb_port_propertyAndy Shevchenko
has_irq member of struct dwapb_port_property is used only in one place, so, make it local test instead and remove from the structure. This local test is using memchr_inv() which is quite efficient in comparison to the original loop and possible little overhead can be neglected. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20200519131233.59032-4-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-25gpio: dwapb: Don't use IRQ 0 as valid Linux interruptAndy Shevchenko
IRQ 0 is not valid in Linux interrupt number space. Refactor the code with this kept in mind. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20200519131233.59032-3-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-25gpio: dwapb: avoid error message for optional IRQAndy Shevchenko
platform_get_irq() will generate an error message if the requested IRQ is not present. Use platform_get_irq_optional() to avoid the error message being generated. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20200519131233.59032-2-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-25gpio: dwapb: Call acpi_gpiochip_free_interrupts() on GPIO chip de-registrationAndy Shevchenko
Add missed acpi_gpiochip_free_interrupts() call when unregistering ports. While at it, drop extra check to call acpi_gpiochip_request_interrupts(). There is no need to have an additional check to call acpi_gpiochip_request_interrupts(). Even without any interrupts available the registered ACPI Event handlers can be useful for debugging purposes. Fixes: e6cb3486f5a1 ("gpio: dwapb: add gpio-signaled acpi event support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20200519131233.59032-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-22gpio: max730x: bring gpiochip_add_data after port configRodrigo Alencar
gpiochip_add_data being called before might cause premature calls of the gpiochip operations before the port_config values are initialized, which would possibily write zeros to port configuration registers, an operation not allowed. For example, if there are gpio-hog nodes in a device-tree, the sequence of function calls are performed gpiochip_add_data of_gpiochip_add of_gpiochip_scan_gpios of_gpiochip_add_hog gpiod_hog gpiochip_request_own_desc gpiod_configure_flags gpiod_direction_output/gpiod_direction_input which would call later the gpiochip operation direction_output or direction_input prior the port_config[] initialization. Moreover, gpiochip_get_data is replaced by the container_of macro inside the gpiochip operations, which would allow the calling of max7301_direction_input prior to gpiochip_add_data Signed-off-by: Rodrigo Alencar <455.rodrigo.alencar@gmail.com> [Bartosz: tweaked the commit message] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-05-18genirq/irq_sim: Simplify the APIBartosz Golaszewski
The interrupt simulator API exposes a lot of custom data structures and functions and doesn't reuse the interfaces already exposed by the irq subsystem. This patch tries to address it. We hide all the simulator-related data structures from users and instead rely on the well-known irq domain. When creating the interrupt simulator the user receives a pointer to a newly created irq_domain and can use it to create mappings for simulated interrupts. It is also possible to pass a handle to fwnode when creating the simulator domain and retrieve it using irq_find_matching_fwnode(). The irq_sim_fire() function is dropped as well. Instead we implement the irq_get/set_irqchip_state interface. We modify the two modules that use the simulator at the same time as adding these changes in order to reduce the intermediate bloat that would result when trying to migrate the drivers in separate patches. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Link: https://lore.kernel.org/r/20200514083901.23445-3-brgl@bgdev.pl
2020-05-18Merge branch 'ib-gpio-aggregator' into develLinus Walleij
2020-05-18gpio: Add GPIO AggregatorGeert Uytterhoeven
GPIO controllers are exported to userspace using /dev/gpiochip* character devices. Access control to these devices is provided by standard UNIX file system permissions, on an all-or-nothing basis: either a GPIO controller is accessible for a user, or it is not. Currently no mechanism exists to control access to individual GPIOs. Hence add a GPIO driver to aggregate existing GPIOs, and expose them as a new gpiochip. This supports the following use cases: - Aggregating GPIOs using Sysfs This is useful for implementing access control, and assigning a set of GPIOs to a specific user or virtual machine. - Generic GPIO Driver This is useful for industrial control, where it can provide userspace access to a simple GPIO-operated device described in DT, cfr. e.g. spidev for SPI-operated devices. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20200511145257.22970-5-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-18gpiolib: Add support for GPIO lookup by line nameGeert Uytterhoeven
Currently a GPIO lookup table can only refer to a specific GPIO by a tuple, consisting of a GPIO controller label and a GPIO offset inside the controller. However, a GPIO may also carry a line name, defined by DT or ACPI. If present, the line name is the most use-centric way to refer to a GPIO. Hence add support for looking up GPIOs by line name. Note that there is no guarantee that GPIO line names are globally unique, so this will use the first match found. Implement this by reusing the existing gpiod_lookup infrastructure. Rename gpiod_lookup.chip_label to gpiod_lookup.key, to make it clear that this field can have two meanings, and update the kerneldoc and GPIO_LOOKUP*() macros. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20200511145257.22970-4-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-18Merge tag 'gpio-fixes-for-v5.7-rc6' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes gpio fixes for v5.7-rc6 - fix probing for chips without PWM in gpio-mvebu - fix ida_simple_get() error path in gpio-exar - fix user-space notifications for line state changes
2020-05-18gpio: xgene-sb: Drop extra check to call acpi_gpiochip_request_interrupts()Andy Shevchenko
There is no need to have an additional check to call acpi_gpiochip_request_interrupts(). Even without any interrupts available the registered ACPI Event handlers can be useful for debugging purposes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200512182721.55127-3-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-18gpio: xgene-sb: Allow driver to be built with COMPILE_TESTAndy Shevchenko
Allow driver to be built with COMPILE_TEST for better test coverage. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200512182721.55127-2-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-18gpio: xgene-sb: Drop redundant OF_GPIO dependencyAndy Shevchenko
There is nothing in the driver requires OF_GPIO. Moreover, driver supports ACPI and OF_GPIO may be a quite overhead on such configurations. Drop dependency for good and replace of_gpio.h to of.h since we have one function to be defined from there. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200512182721.55127-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-18gpio: mb86s7x: Remove superfluous test for ACPI companionAndy Shevchenko
acpi_gpiochip_request_interrupts() will check for ACPI handle of the GPIO chip parent device and bail out if there is none defined. Thus, has_acpi_companion() is effectively repeating above and is not needed in the individual driver. Assigning ->to_irq() unconditionally doesn't change anything, except an error code, but this we fix as well by propagating it from platform_get_irq(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200512182623.54990-2-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-18gpio: mb86s7x: Use devm_clk_get_optional() to get the input clockAndy Shevchenko
Simplify the code which fetches the input clock by using devm_clk_get_optional(). If no input clock is present devm_clk_get_optional() will return NULL instead of an error which matches the behavior of the old code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200512182623.54990-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-18Merge 5.7-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-16gpiolib: Document that GPIO line names are not globally uniqueGeert Uytterhoeven
gpiochip_set_desc_names() no longer rejects GPIO line name collisions. Hence GPIO line names are not guaranteed to be globally unique. In case of multiple GPIO lines with the same name, gpio_name_to_desc() will return the first match found. Update the comments for gpio_name_to_desc() and gpiochip_set_desc_names() to match reality. Fixes: f881bab038c9667d ("gpio: keep the GPIO line names internal") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200511101828.30046-1-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-13gpiolib: notify user-space about line status changes after flags are setBartosz Golaszewski
Currently we emit the REQUESTED line state event after the line is requested but before the flags are configured. This is obviously wrong as we want to pass the updated lineinfo to user-space together with the event. Since the flags can be configured in different ways depending on how the line is being requested - we need to call the notifier chain in different places separately. Fixes: 51c1064e82e7 ("gpiolib: add new ioctl() for monitoring changes in line info") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-05-12Merge tag 'intel-gpio-v5.8-1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into devel intel-gpio for v5.8-1 * MSI support for Intel Merrifield * Refactor gpio-pch to be up-to-date with recent kernel APIs * Miscellaneous cleanups here and there The following is an automated git shortlog grouped by driver: ich: - fix a typo merrifield: - Better show how GPIO and IRQ bases are derived from hardware - Switch over to MSI interrupts pch: - Use in pch_irq_type() macros provided by IRQ core - Refactor pch_irq_type() to avoid unnecessary locking - Get rid of unneeded variable in IRQ handler - Use BIT() and GENMASK() where it's appropriate
2020-05-09Merge tag 'gpio-updates-for-v5.8-part1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio updates for v5.8-rc1 - part1 - correct the IRQ type used in to_irq() in gpio-xgene-sb - add new item to the TODO list - support building gpio-pl061 as module - improve pull-up/down support on GPIO expanders in device-tree - several improvements in gpio-pca953x - emit a warning for too long GPIO line names - add MODULE_DEVICE_TABLE to gpio-tegra186 - add support for new variant to gpio-f7188x - lsgpio can now display bias flags
2020-05-05gpio: exar: Fix bad handling for ida_simple_get error pathTakashi Iwai
The commit 7ecced0934e5 ("gpio: exar: add a check for the return value of ida_simple_get fails") added a goto jump to the common error handler for ida_simple_get() error, but this is wrong in two ways: it doesn't set the proper return code and, more badly, it invokes ida_simple_remove() with a negative index that shall lead to a kernel panic via BUG_ON(). This patch addresses those two issues. Fixes: 7ecced0934e5 ("gpio: exar: add a check for the return value of ida_simple_get fails") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-05-05gpio-f7188x: Add GPIO support for F81865Petteri Jokinen
Add GPIO support for Fintek F81865 chip. Datasheet: http://www.hardwaresecrets.com/datasheets/F81865_V028P.pdf Signed-off-by: Petteri Jokinen <petteri@kiho.fi> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-05-05gpio: tegra186: export MODULE_DEVICE_TABLEMian Yousaf Kaukab
Export MODULE_DEVICE_TABLE since the driver can be built as a module. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-19 13:42:40 +0000