| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 655603de68469adaff16842ac17a5aec9c9ce89b ]
The sysfs handler should return the number of bytes consumed, which in the
case of a successful write is the entire buffer. Also fix a bug where
param.data_len was being set to (count - (2 * sizeof(u32))) instead of just
(count - sizeof(u32)). The latter is correct because we skip over the
leading u32 which is our param.type, but we were also incorrectly
subtracting sizeof(u32) on the line where we were actually setting
param.data_len:
param.data_len = count - sizeof(u32);
This meant that for our example event.kernel_software_watchdog with total
length 10 bytes, param.data_len was just 2 prior to this change.
To test, successfully append an event to the log with gsmi sysfs.
This sample event is for a "Kernel Software Watchdog"
> xxd -g 1 event.kernel_software_watchdog
0000000: 01 00 00 00 ad de 06 00 00 00
> cat event.kernel_software_watchdog > /sys/firmware/gsmi/append_to_eventlog
> mosys eventlog list | tail -1
14 | 2012-06-25 10:14:14 | Kernl Event | Software Watchdog
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
[zwisler: updated changelog for 2nd bug fix and upstream]
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6aecee6ad41cf97c0270f72da032c10eef025bf0 ]
The dell_rbu driver takes firmware update payloads and puts them in memory so
the system BIOS can find them after a reboot. This sometimes fails (though
rarely), because the memory containing the payload is in the CPU cache but
never gets written back to main memory before the system is rebooted (CPU
cache contents are lost on reboot).
With this patch, the payload memory will be changed to uncachable to ensure
that the payload is actually in main memory before the system is rebooted.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ca64b719a1e665ac7449b6a968059176af7365a8 ]
Replace all the memcpy() for copying name strings from the firmware with
strlcpy() to make sure we are bounded by the source buffer size and we
also always have NULL-terminated strings.
This is needed to avoid out of bounds accesses if the firmware returns
a non-terminated string.
Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6fb9367a15d1a126d222d738b2702c7958594a5f ]
The CPER parser assumes that the class code is big endian, but at least
on this edk2-derived Intel Purley platform it's little endian:
efi: EFI v2.50 by EDK II BIOS ID:PLYDCRB1.86B.0119.R05.1701181843
DMI: Intel Corporation PURLEY/PURLEY, BIOS PLYDCRB1.86B.0119.R05.1701181843 01/18/2017
{1}[Hardware Error]: device_id: 0000:5d:00.0
{1}[Hardware Error]: slot: 0
{1}[Hardware Error]: secondary_bus: 0x5e
{1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2030
{1}[Hardware Error]: class_code: 000406
^^^^^^ (should be 060400)
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Talbert <swt@techie.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Link: https://lkml.kernel.org/r/20191002165904.8819-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 442f1e746e8187b9deb1590176f6b0ff19686b11 ]
Commit 4b708b7b1a2c ("firmware: google: check if size is valid when
decoding VPD data") adds length checks, but the new vpd_decode_entry()
function botched the logic -- it adds the key length twice, instead of
adding the key and value lengths separately.
On my local system, this means vpd.c's vpd_section_create_attribs() hits
an error case after the first attribute it parses, since it's no longer
looking at the correct offset. With this patch, I'm back to seeing all
the correct attributes in /sys/firmware/vpd/...
Fixes: 4b708b7b1a2c ("firmware: google: check if size is valid when decoding VPD data")
Cc: <stable@vger.kernel.org>
Cc: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20190930214522.240680-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c05f8f92b701576b615f30aac31fabdc0648649b upstream.
The kernel command line option efivar_ssdt= allows the name to be
specified of an EFI variable containing an ACPI SSDT table that should
be loaded into memory by the OS, and treated as if it was provided by
the firmware.
Currently, that code will always iterate over the EFI variables and
compare each name with the provided name, even if the command line
option wasn't set to begin with.
So bail early when no variable name was provided. This works around a
boot regression on the 2012 Mac Pro, as reported by Scott.
Tested-by: Scott Talbert <swt@techie.net>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Fixes: 475fb4e8b2f4 ("efi / ACPI: load SSTDs from EFI variables")
Link: https://lkml.kernel.org/r/20191002165904.8819-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9dc34d635c67e57051853855c43249408641a5ab ]
Sometimes platfom may take too long to respond to the command and OS
might timeout before platform transfer the ownership of the shared
memory region to the OS with the response.
Since the mailbox channel associated with the channel is freed and new
commands are dispatch on the same channel, OS needs to wait until it
gets back the ownership. If not, either OS may end up overwriting the
platform response for the last command(which is fine as OS timed out
that command) or platform might overwrite the payload for the next
command with the response for the old.
The latter is problematic as platform may end up interpretting the
response as the payload. In order to avoid such race, let's wait until
the OS gets back the ownership before we prepare the shared memory with
the payload for the next command.
Reported-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b194a77fcc4001dc40aecdd15d249648e8a436d1 ]
AER info of PCIe fatal error is not printed in the current driver.
Because APEI driver will panic directly for fatal error, and can't
run to the place of printing AER info.
An example log is as following:
{763}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 11
{763}[Hardware Error]: event severity: fatal
{763}[Hardware Error]: Error 0, type: fatal
{763}[Hardware Error]: section_type: PCIe error
{763}[Hardware Error]: port_type: 0, PCIe end point
{763}[Hardware Error]: version: 4.0
{763}[Hardware Error]: command: 0x0000, status: 0x0010
{763}[Hardware Error]: device_id: 0000:82:00.0
{763}[Hardware Error]: slot: 0
{763}[Hardware Error]: secondary_bus: 0x00
{763}[Hardware Error]: vendor_id: 0x8086, device_id: 0x10fb
{763}[Hardware Error]: class_code: 000002
Kernel panic - not syncing: Fatal hardware error!
This issue was imported by the patch, '37448adfc7ce ("aerdrv: Move
cper_print_aer() call out of interrupt context")'. To fix this issue,
this patch adds print of AER info in cper_print_pcie() for fatal error.
Here is the example log after this patch applied:
{24}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 10
{24}[Hardware Error]: event severity: fatal
{24}[Hardware Error]: Error 0, type: fatal
{24}[Hardware Error]: section_type: PCIe error
{24}[Hardware Error]: port_type: 0, PCIe end point
{24}[Hardware Error]: version: 4.0
{24}[Hardware Error]: command: 0x0546, status: 0x4010
{24}[Hardware Error]: device_id: 0000:01:00.0
{24}[Hardware Error]: slot: 0
{24}[Hardware Error]: secondary_bus: 0x00
{24}[Hardware Error]: vendor_id: 0x15b3, device_id: 0x1019
{24}[Hardware Error]: class_code: 000002
{24}[Hardware Error]: aer_uncor_status: 0x00040000, aer_uncor_mask: 0x00000000
{24}[Hardware Error]: aer_uncor_severity: 0x00062010
{24}[Hardware Error]: TLP Header: 000000c0 01010000 00000001 00000000
Kernel panic - not syncing: Fatal hardware error!
Fixes: 37448adfc7ce ("aerdrv: Move cper_print_aer() call out of interrupt context")
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
[ardb: put parens around terms of && operator]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6e37ccf78a53296c6c7bf426065762c27829eb84 ]
We need to use the proper types and convert between physical addresses
and dma addresses here to avoid mismatch warnings. This is especially
important on systems with a different size for dma addresses and
physical addresses. Otherwise, we get the following warning:
drivers/firmware/qcom_scm.c: In function "qcom_scm_assign_mem":
drivers/firmware/qcom_scm.c:469:47: error: passing argument 3 of "dma_alloc_coherent" from incompatible pointer type [-Werror=incompatible-pointer-types]
We also fix the size argument to dma_free_coherent() because that size
doesn't need to be aligned after it's already aligned on the allocation
size. In fact, dma debugging expects the same arguments to be passed to
both the allocation and freeing sides of the functions so changing the
size is incorrect regardless.
Reported-by: Ian Jackson <ian.jackson@citrix.com>
Cc: Ian Jackson <ian.jackson@citrix.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4b708b7b1a2c09fbdfff6b942ebe3a160213aacd upstream.
The VPD implementation from Chromium Vital Product Data project used to
parse data from untrusted input without checking if the meta data is
invalid or corrupted. For example, the size from decoded content may
be negative value, or larger than whole input buffer. Such invalid data
may cause buffer overflow.
To fix that, the size parameters passed to vpd_decode functions should
be changed to unsigned integer (u32) type, and the parsing of entry
header should be refactored so every size field is correctly verified
before starting to decode.
Fixes: ad2ac9d5c5e0 ("firmware: Google VPD: import lib_vpd source files")
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190830022402.214442-1-hungte@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 66f030eac257a572fbedab3d9646d87d647351fd upstream.
TI-SCI firmware will only respond to messages when the
TI_SCI_FLAG_REQ_ACK_ON_PROCESSED flag is set. Most messages already do
this, set this for the ones that do not.
This will be enforced in future firmware that better match the TI-SCI
specifications, this patch will not break users of existing firmware.
Fixes: aa276781a64a ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol")
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Tested-by: Alejandro Hernandez <ajhernandez@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 94bccc34071094c165c79b515d21b63c78f7e968 ]
iscsi_ibft can use ACPI to find the iBFT entry during bootup,
currently, ISCSI_IBFT depends on ISCSI_IBFT_FIND which is
a X86 legacy way to find the iBFT by searching through the
low memory. This patch changes the dependency so that other
arch like ARM64 can use ISCSI_IBFT as long as the arch supports
ACPI.
ibft_init() needs to use the global variable ibft_addr declared
in iscsi_ibft_find.c. A #ifndef CONFIG_ISCSI_IBFT_FIND is needed
to declare the variable if CONFIG_ISCSI_IBFT_FIND is not selected.
Moving ibft_addr into the iscsi_ibft.c does not work because if
ISCSI_IBFT is selected as a module, the arch/x86/kernel/setup.c won't
be able to find the variable at compile time.
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 92e074acf6f7694e96204265eb18ac113f546e80 ]
Since commit 85f1abe0019f ("kthread, sched/wait: Fix kthread_parkme()
completion issue"), kthreads that are bound to a CPU must be parked
before being stopped. At the moment the PSCI checker calls
kthread_stop() directly on the suspend kthread, which triggers the
following warning:
[ 6.068288] WARNING: CPU: 1 PID: 1 at kernel/kthread.c:398 __kthread_bind_mask+0x20/0x78
...
[ 6.190151] Call trace:
[ 6.192566] __kthread_bind_mask+0x20/0x78
[ 6.196615] kthread_unpark+0x74/0x80
[ 6.200235] kthread_stop+0x44/0x1d8
[ 6.203769] psci_checker+0x3bc/0x484
[ 6.207389] do_one_initcall+0x48/0x260
[ 6.211180] kernel_init_freeable+0x2c8/0x368
[ 6.215488] kernel_init+0x10/0x100
[ 6.218935] ret_from_fork+0x10/0x1c
[ 6.222467] ---[ end trace e05e22863d043cd3 ]---
kthread_unpark() tries to bind the thread to its CPU and aborts with a
WARN() if the thread wasn't in TASK_PARKED state. Park the kthreads
before stopping them.
Fixes: 85f1abe0019f ("kthread, sched/wait: Fix kthread_parkme() completion issue")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a483fcab38b43fb34a7f12ab1daadd3907f150e2 ]
Starting with ACPI 6.2 bits 1 and 2 of the BGRT status field are no longer
reserved. These bits are now used to indicate if the image needs to be
rotated before being displayed.
The first device using these bits has now shown up (the GPD MicroPC) and
the reserved bits check causes us to reject the valid BGRT table on this
device.
Rather then changing the reserved bits check, allowing only the 2 new bits,
instead just completely remove it so that we do not end up with a similar
problem when more bits are added in the future.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ea84b580b95521644429cc6748b6c2bf27c8b0f3 upstream.
Instead of running with interrupts disabled, use a semaphore. This should
make it easier for backends that may need to sleep (e.g. EFI) when
performing a write:
|BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
|in_atomic(): 1, irqs_disabled(): 1, pid: 2236, name: sig-xstate-bum
|Preemption disabled at:
|[<ffffffff99d60512>] pstore_dump+0x72/0x330
|CPU: 26 PID: 2236 Comm: sig-xstate-bum Tainted: G D 4.20.0-rc3 #45
|Call Trace:
| dump_stack+0x4f/0x6a
| ___might_sleep.cold.91+0xd3/0xe4
| __might_sleep+0x50/0x90
| wait_for_completion+0x32/0x130
| virt_efi_query_variable_info+0x14e/0x160
| efi_query_variable_store+0x51/0x1a0
| efivar_entry_set_safe+0xa3/0x1b0
| efi_pstore_write+0x109/0x140
| pstore_dump+0x11c/0x330
| kmsg_dump+0xa4/0xd0
| oops_exit+0x22/0x30
...
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: 21b3ddd39fee ("efi: Don't use spinlocks for efi vars")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ef1491e791308317bb9851a0ad380c4a68b58d54 ]
The following commit:
9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler")
converted 'efi_rts_work' from an auto variable to a global variable.
However, when submitting the work, INIT_WORK_ONSTACK() was still used,
causing the following complaint from debugobjects:
ODEBUG: object 00000000ed27b500 is NOT on stack 00000000c7d38760, but annotated.
Change the macro to just INIT_WORK() to eliminate the warning.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler")
Link: http://lkml.kernel.org/r/20181114175544.12860-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4e46c2a956215482418d7b315749fb1b6c6bc224 ]
The UEFI spec revision 2.7 errata A section 8.4 has the following to
say about the virtual memory runtime services:
"This section contains function definitions for the virtual memory
support that may be optionally used by an operating system at runtime.
If an operating system chooses to make EFI runtime service calls in a
virtual addressing mode instead of the flat physical mode, then the
operating system must use the services in this section to switch the
EFI runtime services from flat physical addressing to virtual
addressing."
So it is pretty clear that calling SetVirtualAddressMap() is entirely
optional, and so there is no point in doing so unless it achieves
anything useful for us.
This is not the case for 64-bit ARM. The identity mapping used by the
firmware is arbitrarily converted into another permutation of userland
addresses (i.e., bits [63:48] cleared), and the runtime code could easily
deal with the original layout in exactly the same way as it deals with
the converted layout. However, due to constraints related to page size
differences if the OS is not running with 4k pages, and related to
systems that may expose the individual sections of PE/COFF runtime
modules as different memory regions, creating the virtual layout is a
bit fiddly, and requires us to sort the memory map and reason about
adjacent regions with identical memory types etc etc.
So the obvious fix is to stop calling SetVirtualAddressMap() altogether
on arm64 systems. However, to avoid surprises, which are notoriously
hard to diagnose when it comes to OS<->firmware interactions, let's
start by making it an opt-out feature, and implement support for the
'efi=novamap' kernel command line parameter on ARM and arm64 systems.
( Note that 32-bit ARM generally does require SetVirtualAddressMap() to be
used, given that the physical memory map and the kernel virtual address
map are not guaranteed to be non-overlapping like on arm64. However,
having support for efi=novamap,noruntime on 32-bit ARM, combined with
the recently proposed support for earlycon=efifb, is likely to be useful
to diagnose boot issues on such systems if they have no accessible serial
port. )
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190202094119.13230-8-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5de0fef0230f3c8d75cff450a71740a7bf2db866 ]
The EFI memory attributes code cross-references the EFI memory map with
the more granular EFI memory attributes table to ensure that they are in
sync before applying the strict permissions to the regions it describes.
Since we always install virtual mappings for the EFI runtime regions to
which these strict permissions apply, we currently perform a sanity check
on the EFI memory descriptor, and ensure that the EFI_MEMORY_RUNTIME bit
is set, and that the virtual address has been assigned.
However, in cases where a runtime region exists at physical address 0x0,
and the virtual mapping equals the physical mapping, e.g., when running
in mixed mode on x86, we encounter a memory descriptor with the runtime
attribute and virtual address 0x0, and incorrectly draw the conclusion
that a runtime region exists for which no virtual mapping was installed,
and give up altogether. The consequence of this is that firmware mappings
retain their read-write-execute permissions, making the system more
vulnerable to attacks.
So let's only bail if the virtual address of 0x0 has been assigned to a
physical region that does not reside at address 0x0.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 10f0d2f577053 ("efi: Implement generic support for the Memory ...")
Link: http://lkml.kernel.org/r/20190202094119.13230-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45b14a4ffcc1e0b5caa246638f942cbe7eaea7ad ]
When checking a generic status block, we iterate over all the generic
data blocks. The loop condition only checks that the start of the
generic data block is valid (within estatus->data_length) but not the
whole block. Because the size of data blocks (excluding error data) may
vary depending on the revision and the revision is contained within the
data block, ensure that enough of the current data block is valid before
dereferencing any members otherwise an out-of-bounds access may occur if
estatus->data_length is invalid.
This relies on the fact that struct acpi_hest_generic_data_v300 is a
superset of the earlier version. Also rework the other checks to avoid
potential underflow.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Tyler Baicar <baicar.tyler@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit df997abeebadaa4824271009e2d2b526a70a11cb upstream.
Add missing break statement in order to prevent the code from falling
through to case ISCSI_BOOT_TGT_NAME, which is unnecessary.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: b33a84a38477 ("ibft: convert iscsi_ibft module to iscsi boot lib")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f331e766c4be33f4338574f3c9f7f77e98ab4571 upstream.
Calls into UV firmware must be protected against concurrency, expose the
efi_runtime_lock to the UV platform, and use it to serialise UV BIOS
calls.
Signed-off-by: Hedi Berriche <hedi.berriche@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Russ Anderson <rja@hpe.com>
Reviewed-by: Dimitri Sivanich <sivanich@hpe.com>
Reviewed-by: Mike Travis <mike.travis@hpe.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-efi <linux-efi@vger.kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: stable@vger.kernel.org # v4.9+
Cc: Steve Wahl <steve.wahl@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190213193413.25560-5-hedi.berriche@hpe.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 46edb8d1322c1763dd04e179992f8e9996085047 upstream.
The device/driver model clearly mandates that bus driver that discover
and allocate the device must set the release callback. This callback
will be used to free the device after all references have gone away.
scmi bus driver is missing the obvious callback which will result in
the following warning if the device is unregistered:
Device 'scmi_dev.1' does not have a release() function, it is broken and
must be fixed. See Documentation/kobject.txt.
WARNING at drivers/base/core.c:922 device_release+0x8c/0xa0
Hardware name: ARM LTD Juno Development Platform BIOS EDK II Jan 21 2019
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : device_release+0x8c/0xa0
lr : device_release+0x8c/0xa0
Call trace:
device_release+0x8c/0xa0
kobject_put+0x8c/0x208
device_unregister+0x30/0x78
scmi_device_destroy+0x28/0x50
scmi_probe+0x354/0x5b0
platform_drv_probe+0x58/0xa8
really_probe+0x2c4/0x3e8
driver_probe_device+0x12c/0x148
__device_attach_driver+0xac/0x150
bus_for_each_drv+0x78/0xd8
__device_attach+0xe0/0x168
device_initial_probe+0x24/0x30
bus_probe_device+0xa0/0xa8
deferred_probe_work_func+0x8c/0xe0
process_one_work+0x1f0/0x478
worker_thread+0x22c/0x450
kthread+0x134/0x138
ret_from_fork+0x10/0x1c
---[ end trace 420bdb7f6af50937 ]---
Fix the issue by providing scmi_device_release callback. We have
everything required for device release already in scmi_device_destroy,
so we just need to move freeing of the device to scmi_device_release.
Fixes: 933c504424a2 ("firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org # 4.17+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ab2180a15ce54739fed381efb4cb12e78dfb1561 ]
Since commit:
ce2e6db554fa ("brcmfmac: Add support for getting nvram contents from EFI variables")
we have a device driver accessing the efivars API. Several functions in
the efivars API assume __efivars is set, i.e., that they will be accessed
only after efivars_register() has been called. However, the following NULL
pointer access was reported calling efivar_entry_size() from the brcmfmac
device driver:
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = 60bfa5f1
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
...
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: events request_firmware_work_func
PC is at efivar_entry_size+0x28/0x90
LR is at brcmf_fw_complete_request+0x3f8/0x8d4 [brcmfmac]
pc : [<c0c40718>] lr : [<bf2a3ef4>] psr: a00d0113
sp : ede7fe28 ip : ee983410 fp : c1787f30
r10: 00000000 r9 : 00000000 r8 : bf2b2258
r7 : ee983000 r6 : c1604c48 r5 : ede7fe88 r4 : edf337c0
r3 : 00000000 r2 : 00000000 r1 : ede7fe88 r0 : c17712c8
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: ad16804a DAC: 00000051
Disassembly showed that the local static variable __efivars is NULL,
which is not entirely unexpected given that it is a non-EFI platform.
So add a NULL pointer check to efivar_entry_size(), and to related
functions while at it. In efivars_register() a couple of sanity checks
are added as well.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-9-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3db5e0ba8b8f4aee631d7ee04b7a11c56cfdc213 ]
When building the kernel with Clang, some disabled warnings appear
because this Makefile overrides KBUILD_CFLAGS for x86{,_64}. Add them to
this list so that the build is clean again.
-Wpointer-sign was disabled for the whole kernel before the beginning of Git history.
-Waddress-of-packed-member was disabled for the whole kernel and for
the early boot code in these commits:
bfb38988c51e ("kbuild: clang: Disable 'address-of-packed-member' warning")
20c6c1890455 ("x86/boot: Disable the address-of-packed-member compiler warning").
-Wgnu was disabled for the whole kernel and for the early boot code in
these commits:
61163efae020 ("kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang")
6c3b56b19730 ("x86/boot: Disable Clang warnings about GNU extensions").
[ mingo: Made the changelog more readable. ]
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-8-ard.biesheuvel@linaro.org
Link: https://github.com/ClangBuiltLinux/linux/issues/112
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 33412b8673135b18ea42beb7f5117ed0091798b6 ]
Commit:
3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory map longer for BGRT")
deferred the unmap of the early mapping of the UEFI memory map to
accommodate the ACPI BGRT code, which looks up the memory type that
backs the BGRT table to validate it against the requirements of the UEFI spec.
Unfortunately, this causes problems on ARM, which does not permit
early mappings to persist after paging_init() is called, resulting
in a WARN() splat. Since we don't support the BGRT table on ARM anway,
let's revert ARM to the old behaviour, which is to take down the
early mapping at the end of efi_init().
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory ...")
Link: http://lkml.kernel.org/r/20181114175544.12860-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 41f1c48420709470c51ee0e54b6fb28b956bb4e0 upstream.
When building with CONFIG_EFI and CONFIG_EFI_STUB on ARM, the libstub
Makefile would use -mno-single-pic-base without checking it was
supported by the compiler. As the ARM (32-bit) clang backend does not
support this flag, the build would fail.
This changes the Makefile to check the compiler's support for
-mno-single-pic-base before using it, similar to c1c386681bd7 ("ARM:
8767/1: add support for building ARM kernel with clang").
Signed-off-by: Alistair Strachan <astrachan@google.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 72a58a63a164b4e9d2d914e65caeb551846883f1 upstream.
Commit:
24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size")
increased the allocation size for the FDT image created by the stub to a
fixed value of 2 MB, to simplify the former code that made several
attempts with increasing values for the size. This is reasonable
given that the allocation is of type EFI_LOADER_DATA, which is released
to the kernel unless it is explicitly memblock_reserve()d by the early
boot code.
However, this allocation size leaked into the 'size' field of the FDT
header metadata, and so the entire allocation remains occupied by the
device tree binary, even if most of it is not used to store device tree
information.
So call fdt_pack() to shrink the FDT data structure to its minimum size
after populating all the fields, so that the remaining memory is no
longer wasted.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.12+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size")
Link: http://lkml.kernel.org/r/20181114175544.12860-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 20edec388277b62ddfddb8b2b376a937a2cd6d1b ]
Both callers of coreboot_table_init() ioremap the pointer that comes in
but they don't unmap the memory on failure. Both of them also fail probe
immediately with the return value of coreboot_table_init(), leaking a
mapping when it fails. The mapping isn't necessary at all after devices
are populated either, so we can just drop the mapping here when we exit
the function. Let's do that to simplify the code a bit and plug the leak.
Cc: Wei-Ning Huang <wnhuang@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Samuel Holland <samuel@sholland.org>
Fixes: 570d30c2823f ("firmware: coreboot: Expose the coreboot table as a bus")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Default EFI_ARMSTUB_DTB_LOADER to y to allow the dtb= command
line parameter to function with efi loader.
Required for development purposes and to boot on existing bootloaders
that do not support devicetree provided by the firmware or by the
bootloader.
Fixes: 3d7ee348aa41 ("efi/libstub/arm: Add opt-in Kconfig option ...")
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Firmware can provide zero as values for sustained performance level and
corresponding sustained frequency in kHz in order to hide the actual
frequencies and provide only abstract values. It may endup with divide
by zero scenario resulting in kernel panic.
Let's set the multiplication factor to one if either one or both of them
(sustained_perf_level and sustained_freq) are set to zero.
Fixes: a9e3fbfaa0ff ("firmware: arm_scmi: add initial support for performance protocol")
Reported-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"Mostly small fixes and cleanups for fb drivers (the biggest updates
are for udlfb and pxafb drivers). This also adds deferred console
takeover support to the console code and efifb driver.
Summary:
- add support for deferred console takeover, when enabled defers
fbcon taking over the console from the dummy console until the
first text is displayed on the console - together with the "quiet"
kernel commandline option this allows fbcon to still be used
together with a smooth graphical bootup (Hans de Goede)
- improve console locking debugging code (Thomas Zimmermann)
- copy the ACPI BGRT boot graphics to the framebuffer when deferred
console takeover support is used in efifb driver (Hans de Goede)
- update udlfb driver - fix lost console when the user unplugs a USB
adapter, fix the screen corruption issue, fix locking and add some
performance optimizations (Mikulas Patocka)
- update pxafb driver - fix using uninitialized memory, switch to
devm_* API, handle initialization errors and add support for
lcd-supply regulator (Daniel Mack)
- add support for boards booted with a DeviceTree in pxa3xx_gcu
driver (Daniel Mack)
- rename omap2 module to omap2fb.ko to avoid conflicts with omap1
driver (Arnd Bergmann)
- enable ACPI-based enumeration for goldfishfb driver (Yu Ning)
- fix goldfishfb driver to make user space Android code use 60 fps
(Christoffer Dall)
- print big fat warning when nomodeset kernel parameter is used in
vgacon driver (Lyude Paul)
- remove VLA usage from fsl-diu-fb driver (Kees Cook)
- misc fixes (Julia Lawall, Geert Uytterhoeven, Fredrik Noring,
Yisheng Xie, Dan Carpenter, Daniel Vetter, Anton Vasilyev, Randy
Dunlap, Gustavo A. R. Silva, Colin Ian King, Fengguang Wu)
- misc cleanups (Roman Kiryanov, Yisheng Xie, Colin Ian King)"
* tag 'fbdev-v4.19' of https://github.com/bzolnier/linux: (54 commits)
Documentation/fb: corrections for fbcon.txt
fbcon: Do not takeover the console from atomic context
dummycon: Stop exporting dummycon_[un]register_output_notifier
fbcon: Only defer console takeover if the current console driver is the dummycon
fbcon: Only allow FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER if fbdev is builtin
fbdev: omap2: omapfb: fix ifnullfree.cocci warnings
fbdev: omap2: omapfb: fix bugon.cocci warnings
fbdev: omap2: omapfb: fix boolreturn.cocci warnings
fb: amifb: fix build warnings when not builtin
fbdev/core: Disable console-lock warnings when fb.lockless_register_fb is set
console: Replace #if 0 with atomic var 'ignore_console_lock_warning'
udlfb: use spin_lock_irq instead of spin_lock_irqsave
udlfb: avoid prefetch
udlfb: optimization - test the backing buffer
udlfb: allow reallocating the framebuffer
udlfb: set line_length in dlfb_ops_set_par
udlfb: handle allocation failure
udlfb: set optimal write delay
udlfb: make a local copy of fb_ops
udlfb: don't switch if we are switching to the same videomode
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Some of the larger changes this merge window:
- Removal of drivers for Exynos5440, a Samsung SoC that never saw
widespread use.
- Uniphier support for USB3 and SPI reset handling
- Syste control and SRAM drivers and bindings for Allwinner platforms
- Qualcomm AOSS (Always-on subsystem) reset controller drivers
- Raspberry Pi hwmon driver for voltage
- Mediatek pwrap (pmic) support for MT6797 SoC"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits)
drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
soc: fsl: cleanup Kconfig menu
soc: fsl: dpio: Convert DPIO documentation to .rst
staging: fsl-mc: Remove remaining files
staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
staging: fsl-dpaa2: eth: move generic FD defines to DPIO
soc: fsl: qe: gpio: Add qe_gpio_set_multiple
usb: host: exynos: Remove support for Exynos5440
clk: samsung: Remove support for Exynos5440
soc: sunxi: Add the A13, A23 and H3 system control compatibles
reset: uniphier: add reset control support for SPI
cpufreq: exynos: Remove support for Exynos5440
ata: ahci-platform: Remove support for Exynos5440
soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata
soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs
soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs
soc: mediatek: pwrap: fix cipher init setting error
dt-bindings: pwrap: mediatek: add pwrap support for MT6797
reset: uniphier: add USB3 core reset control
dt-bindings: reset: uniphier: add USB3 core reset support
...
|
|
To allow existing C code to be incorporated into the decompressor or the
UEFI stub, introduce a CPP macro that turns all EXPORT_SYMBOL_xxx
declarations into nops, and #define it in places where such exports are
undesirable. Note that this gets rid of a rather dodgy redefine of
linux/export.h's header guard.
Link: http://lkml.kernel.org/r/20180704083651.24360-3-ard.biesheuvel@linaro.org
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morris <james.morris@microsoft.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the bit set of char/misc drivers for 4.19-rc1
There is a lot here, much more than normal, seems like everyone is
writing new driver subsystems these days... Anyway, major things here
are:
- new FSI driver subsystem, yet-another-powerpc low-level hardware
bus
- gnss, finally an in-kernel GPS subsystem to try to tame all of the
crazy out-of-tree drivers that have been floating around for years,
combined with some really hacky userspace implementations. This is
only for GNSS receivers, but you have to start somewhere, and this
is great to see.
Other than that, there are new slimbus drivers, new coresight drivers,
new fpga drivers, and loads of DT bindings for all of these and
existing drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
android: binder: Rate-limit debug and userspace triggered err msgs
fsi: sbefifo: Bump max command length
fsi: scom: Fix NULL dereference
misc: mic: SCIF Fix scif_get_new_port() error handling
misc: cxl: changed asterisk position
genwqe: card_base: Use true and false for boolean values
misc: eeprom: assignment outside the if statement
uio: potential double frees if __uio_register_device() fails
eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
misc: ti-st: Fix memory leak in the error path of probe()
android: binder: Show extra_buffers_size in trace
firmware: vpd: Fix section enabled flag on vpd_section_destroy
platform: goldfish: Retire pdev_bus
goldfish: Use dedicated macros instead of manual bit shifting
goldfish: Add missing includes to goldfish.h
mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
dt-bindings: mux: add adi,adgs1408
Drivers: hv: vmbus: Cleanup synic memory free path
Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new Socionext MN88443x ISDB-S/T demodulator driver: mn88443x
- new sensor drivers: ak7375, ov2680 and rj54n1cb0c
- an old soc-camera sensor driver converted to the V4L2 framework:
mt9v111
- a new Voice-Coil Motor (VCM) driver: dw9807-vcm
- some cleanups at cx25821, removing legacy unused code
- some improvements at ddbridge driver
- new platform driver: vicodec
- some DVB API cleanups, removing ioctls and compat code for old
out-of-tree drivers that were never merged upstream
- improvements at DVB core to support frontents that support both
Satellite and non-satellite delivery systems
- got rid of the unused VIDIOC_RESERVED V4L2 ioctl
- some cleanups/improvements at gl861 ISDB driver
- several improvements on ov772x, ov7670 and ov5640, imx274, ov5645,
and smiapp sensor drivers
- fixes at em28xx to support dual TS devices
- some cleanups at V4L2/VB2 locking logic
- some API improvements at media controller
- some cec core and drivers improvements
- some uvcvideo improvements
- some improvements at platform drivers: stm32-dcmi, rcar-vin, coda,
reneseas-ceu, imx, vsp1, venus, camss
- lots of other cleanups and fixes
* tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (406 commits)
Revert "media: vivid: shut up warnings due to a non-trivial logic"
siano: get rid of an unused return code for debugfs register
media: isp: fix a warning about a wrong struct initializer
media: radio-wl1273: fix return code for the polling routine
media: s3c-camif: fix return code for the polling routine
media: saa7164: fix return codes for the polling routine
media: exynos-gsc: fix return code if mutex was interrupted
media: mt9v111: Fix build error with no VIDEO_V4L2_SUBDEV_API
media: xc4000: get rid of uneeded casts
media: drxj: get rid of uneeded casts
media: tuner-xc2028: don't use casts for printing sizes
media: cleanup fall-through comments
media: vivid: shut up warnings due to a non-trivial logic
media: rtl28xxu: be sure that it won't go past the array size
media: mt9v111: avoid going past the buffer
media: vsp1_dl: add a description for cmdpool field
media: sta2x11: add a missing parameter description
media: v4l2-mem2mem: add descriptions to MC fields
media: i2c: fix warning in Aptina MT9V111
media: imx: shut up a false positive warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A bunch of good stuff in here. Worth noting is that we've pulled in
the x86/mm branch from -tip so that we can make use of the core
ioremap changes which allow us to put down huge mappings in the
vmalloc area without screwing up the TLB. Much of the positive
diffstat is because of the rseq selftest for arm64.
Summary:
- Wire up support for qspinlock, replacing our trusty ticket lock
code
- Add an IPI to flush_icache_range() to ensure that stale
instructions fetched into the pipeline are discarded along with the
I-cache lines
- Support for the GCC "stackleak" plugin
- Support for restartable sequences, plus an arm64 port for the
selftest
- Kexec/kdump support on systems booting with ACPI
- Rewrite of our syscall entry code in C, which allows us to zero the
GPRs on entry from userspace
- Support for chained PMU counters, allowing 64-bit event counters to
be constructed on current CPUs
- Ensure scheduler topology information is kept up-to-date with CPU
hotplug events
- Re-enable support for huge vmalloc/IO mappings now that the core
code has the correct hooks to use break-before-make sequences
- Miscellaneous, non-critical fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
arm64: alternative: Use true and false for boolean values
arm64: kexec: Add comment to explain use of __flush_icache_range()
arm64: sdei: Mark sdei stack helper functions as static
arm64, kaslr: export offset in VMCOREINFO ELF notes
arm64: perf: Add cap_user_time aarch64
efi/libstub: Only disable stackleak plugin for arm64
arm64: drop unused kernel_neon_begin_partial() macro
arm64: kexec: machine_kexec should call __flush_icache_range
arm64: svc: Ensure hardirq tracing is updated before return
arm64: mm: Export __sync_icache_dcache() for xen-privcmd
drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memory
arm64: Add support for STACKLEAK gcc plugin
arm64: Add stack information to on_accessible_stack
drivers/perf: hisi: update the sccl_id/ccl_id when MT is supported
arm64: fix ACPI dependencies
rseq/selftests: Add support for arm64
arm64: acpi: fix alignment fault in accessing ACPI
efi/arm: map UEFI memory map even w/o runtime services enabled
efi/arm: preserve early mapping of UEFI memory map longer for BGRT
drivers: acpi: add dependency of EFI for arm64
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Thomas Gleixner:
- Make lazy TLB mode even lazier to avoid pointless switch_mm()
operations, which reduces CPU load by 1-2% for memcache workloads
- Small cleanups and improvements all over the place
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove redundant check for kmem_cache_create()
arm/asm/tlb.h: Fix build error implicit func declaration
x86/mm/tlb: Make clear_asid_other() static
x86/mm/tlb: Skip atomic operations for 'init_mm' in switch_mm_irqs_off()
x86/mm/tlb: Always use lazy TLB mode
x86/mm/tlb: Only send page table free TLB flush to lazy TLB CPUs
x86/mm/tlb: Make lazy TLB mode lazier
x86/mm/tlb: Restructure switch_mm_irqs_off()
x86/mm/tlb: Leave lazy TLB mode at page table free time
mm: Allocate the mm_cpumask (mm->cpu_bitmap[]) dynamically based on nr_cpu_ids
x86/mm: Add TLB purge to free pmd/pte page interfaces
ioremap: Update pgtable free interfaces with addr
x86/mm: Disable ioremap free page handling on x86-PAE
|
|
A couple of drivers produced build errors after the mod_devicetable.h
header was split out from the platform_device one, e.g.
drivers/media/platform/davinci/vpbe_osd.c:42:40: error: array type has incomplete element type 'struct platform_device_id'
drivers/media/platform/davinci/vpbe_venc.c:42:40: error: array type has incomplete element type 'struct platform_device_id'
This adds the inclusion where needed.
Fixes: ac3167257b9f ("headers: separate linux/mod_devicetable.h from linux/platform_device.h")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
static struct ro_vpd and rw_vpd are initialized by vpd_sections_init()
in vpd_probe() based on header's ro and rw sizes.
In vpd_remove() vpd_section_destroy() performs deinitialization based
on enabled flag, which is set to true by vpd_sections_init().
This leads to call of vpd_section_destroy() on already destroyed section
for probe-release-probe-release sequence if first probe performs
ro_vpd initialization and second probe does not initialize it.
The patch adds changing enabled flag on vpd_section_destroy and adds
cleanup on the error path of vpd_sections_init.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
arm64 uses the full KBUILD_CFLAGS for building libstub as opposed
to x86 which doesn't. This means that x86 doesn't pick up
the gcc-plugins. We need to disable the stackleak plugin but
doing this unconditionally breaks x86 build since it doesn't
have any plugins. Switch to disabling the stackleak plugin for
arm64 only.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
This adds support for the STACKLEAK gcc plugin to arm64 by implementing
stackleak_check_alloca(), based heavily on the x86 version, and adding the
two helpers used by the stackleak common code: current_top_of_stack() and
on_thread_stack(). The stack erasure calls are made at syscall returns.
Additionally, this disables the plugin in hypervisor and EFI stub code,
which are out of scope for the protection.
Acked-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
hotplug tests
Commit 7f9545aa1a91 ("arm64: smp: remove cpu and numa topology
information when hotplugging out CPU") updates the cpu topology when
the CPU is hotplugged out. However the PSCI checker code uses the
topology_core_cpumask pointers for some of the cpu hotplug testing.
Since the pointer to the core_cpumask of the first CPU in the group
is used, which when that CPU itself is hotpugged out is just set to
itself, the testing terminates after that particular CPU is tested out.
But the intention of this tests is to cover all the CPU in the group.
In order to support that, we need to stash the topology_core_cpumask
before the start of the test and use that value instead of pointer to
a cpumask which will be updated on CPU hotplug.
Fixes: 7f9545aa1a91a9a4 ("arm64: smp: remove cpu and numa topology
information when hotplugging out CPU")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Under the current implementation, UEFI memory map will be mapped and made
available in virtual mappings only if runtime services are enabled.
But in a later patch, we want to use UEFI memory map in acpi_os_ioremap()
to create mappings of ACPI tables using memory attributes described in
UEFI memory map.
See the following commit:
arm64: acpi: fix alignment fault in accessing ACPI tables
So, as a first step, arm_enter_runtime_services() is modified, alongside
Ard's patch[1], so that UEFI memory map will not be freed even if
efi=noruntime.
[1] https://marc.info/?l=linux-efi&m=152930773507524&w=2
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The BGRT code validates the contents of the table against the UEFI
memory map, and so it expects it to be mapped when the code runs.
On ARM, this is currently not the case, since we tear down the early
mapping after efi_init() completes, and only create the permanent
mapping in arm_enable_runtime_services(), which executes as an early
initcall, but still leaves a window where the UEFI memory map is not
mapped.
So move the call to efi_memmap_unmap() from efi_init() to
arm_enable_runtime_services().
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: fold in EFI_MEMMAP attribute check from Ard]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The commit:
2f74f09bce4f ("efi: parse ARM processor error")
... brought inconsistency in UUID types which are used across the CPER.
Fix this by moving to use guid_t API everywhere.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tyler Baicar <tbaicar@codeaurora.org>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180720014726.24031-9-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There's one ARM, one x86_32 and one x86_64 version of efi_open_volume()
which can be folded into a single shared version by masking their
differences with the efi_call_proto() macro introduced by commit:
3552fdf29f01 ("efi: Allow bitness-agnostic protocol calls").
To be able to dereference the device_handle attribute from the
efi_loaded_image_t table in an arch- and bitness-agnostic manner,
introduce the efi_table_attr() macro (which already exists for x86)
to arm and arm64.
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180720014726.24031-7-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The mm_struct always contains a cpumask bitmap, regardless of
CONFIG_CPUMASK_OFFSTACK. That means the first step can be to
simplify things, and simply have one bitmask at the end of the
mm_struct for the mm_cpumask.
This does necessitate moving everything else in mm_struct into
an anonymous sub-structure, which can be randomized when struct
randomization is enabled.
The second step is to determine the correct size for the
mm_struct slab object from the size of the mm_struct
(excluding the CPU bitmap) and the size the cpumask.
For init_mm we can simply allocate the maximum size this
kernel is compiled for, since we only have one init_mm
in the system, anyway.
Pointer magic by Mike Galbraith, to evade -Wstringop-overflow
getting confused by the dynamically sized array.
Tested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Rik van Riel <riel@surriel.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@fb.com
Cc: luto@kernel.org
Link: http://lkml.kernel.org/r/20180716190337.26133-2-riel@surriel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The following commit:
7e1550b8f208 ("efi: Drop type and attribute checks in efi_mem_desc_lookup()")
refactored the implementation of efi_mem_desc_lookup() so that the type
check is moved to the callers, one of which is the x86 version of
efi_arch_mem_reserve(), where we added a modified check that only takes
EFI_BOOT_SERVICES_DATA regions into account.
This is reasonable, since it is the only memory type that requires this,
but doing so uncovered some unexpected behavior in the ESRT code, which
permits the ESRT table to reside in other types of memory than what the
UEFI spec mandates (i.e., EFI_BOOT_SERVICES_DATA), and unconditionally
calls efi_mem_reserve() on the region in question. This may result in
errors such as
esrt: Reserving ESRT space from 0x000000009c810318 to 0x000000009c810350.
efi: Failed to lookup EFI memory descriptor for 0x000000009c810318
when the ESRT table is not in EFI_BOOT_SERVICES_DATA memory, but we try
to reserve it nonetheless.
So make the call to efi_mem_reserve() conditional on the memory type.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The current implementation of efi_mem_desc_lookup() includes the
following check on the memory descriptor it returns:
if (!(md->attribute & EFI_MEMORY_RUNTIME) &&
md->type != EFI_BOOT_SERVICES_DATA &&
md->type != EFI_RUNTIME_SERVICES_DATA) {
continue;
}
This means that only EfiBootServicesData or EfiRuntimeServicesData
regions are considered, or any other region type provided that it
has the EFI_MEMORY_RUNTIME attribute set.
Given what the name of the function implies, and the fact that any
physical address can be described in the UEFI memory map only a single
time, it does not make sense to impose this condition in the body of the
loop, but instead, should be imposed by the caller depending on the value
that is returned to it.
Two such callers exist at the moment:
- The BGRT code when running on x86, via efi_mem_reserve() and
efi_arch_mem_reserve(). In this case, the region is already known to
be EfiBootServicesData, and so the check is redundant.
- The ESRT handling code which introduced this function, which calls it
both directly from efi_esrt_init() and again via efi_mem_reserve() and
efi_arch_mem_reserve() [on x86].
So let's move this check into the callers instead. This preserves the
current behavior both for BGRT and ESRT handling, and allows the lookup
routine to be reused by other [upcoming] users that don't have this
limitation.
In the ESRT case, keep the entire condition, so that platforms that
deviate from the UEFI spec and use something other than
EfiBootServicesData for the ESRT table will keep working as before.
For x86's efi_arch_mem_reserve() implementation, limit the type to
EfiBootServicesData, since it is the only type the reservation code
expects to operate on in the first place.
While we're at it, drop the __init annotation so that drivers can use it
as well.
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-8-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There are various ways a platform can provide a device tree binary
to the kernel, with different levels of sophistication:
- ideally, the UEFI firmware, which is tightly coupled with the
platform, provides a device tree image directly as a UEFI
configuration table, and typically permits the contents to be
manipulated either via menu options or via UEFI environment
variables that specify a replacement image,
- GRUB for ARM has a 'devicetree' directive which allows a device
tree image to be loaded from any location accessible to GRUB, and
supersede the one provided by the firmware,
- the EFI stub implements a dtb= command line option that allows a
device tree image to be loaded from a file residing in the same
file system as the one the kernel image was loaded from.
The dtb= command line option was never intended to be more than a
development feature, to allow the other options to be implemented
in parallel. So let's make it an opt-in feature that is disabled
by default, but can be re-enabled at will.
Note that we already disable the dtb= command line option when we
detect that we are running with UEFI Secure Boot enabled.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-7-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
Duncan Laurie
Stuart Hayes
Sudeep Holla
Lukas Wunner
Brian Norris
Ard Biesheuvel
Xiaofei Tan
Stephen Boyd
Hung-Te Lin
Andrew F. Davis
Thomas Tai
Jean-Philippe Brucker
Hans de Goede
Kees Cook
Waiman Long
Ross Lagerwall
Gustavo A. R. Silva
Hedi Berriche
Arend van Spriel
Nathan Chancellor
Alistair Strachan
Scott Branden
Linus Torvalds
Arnd Bergmann
Anton Vasilyev
Laura Abbott
AKASHI Takahiro
Andy Shevchenko
Rik van Riel