| Age | Commit message (Collapse) | Author |
|---|
|
IRQF_NO_SUSPEND flag is set for MU IRQ of IPC work, but with this
flag set, IRQD_WAKEUP_ARMED flag will NOT be set during
suspend_device_irq() phase, then when MU IRQ arrives, it will NOT
wake up system from suspend.
To fix this issue, pm_system_wakeup() is called in general MU IRQ
handler to make sure system can be waked up when MU IRQ arrives.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Include <linux/firmware/imx/sci.h> for the declarations of the
functions exported from this driver. This fixes the following
sparse warnings:
drivers/firmware/imx/imx-scu-irq.c:45:5: warning: symbol 'imx_scu_irq_register_notifier' was not declared. Should it be static?
drivers/firmware/imx/imx-scu-irq.c:52:5: warning: symbol 'imx_scu_irq_unregister_notifier' was not declared. Should it be static?
drivers/firmware/imx/imx-scu-irq.c:97:5: warning: symbol 'imx_scu_irq_group_enable' was not declared. Should it be static?
drivers/firmware/imx/imx-scu-irq.c:130:5: warning: symbol 'imx_scu_enable_general_irq_channel' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The imx_scu_irq_group_enable() is normally called during module driver
probe phase to enable SCU group irq, if SCU IPC is NOT ready, below
dump will show out:
[ 0.933001] Hardware name: Freescale i.MX8QXP MEK (DT)
[ 0.938129] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 0.942907] pc : imx_scu_call_rpc+0x114/0x158
[ 0.947251] lr : imx_scu_irq_group_enable+0x74/0xc4
[ 0.952113] sp : ffff00001005bae0
[ 0.955415] x29: ffff00001005bae0 x28: ffff0000111bb0a0
[ 0.960712] x27: ffff00001140b000 x26: ffff00001111068c
[ 0.966011] x25: ffff0000111bb100 x24: 0000000000000000
[ 0.971311] x23: ffff0000113d9cd8 x22: 0000000000000001
[ 0.976610] x21: 0000000000000001 x20: ffff80083b51a410
[ 0.981909] x19: ffff000011259000 x18: 0000000000000480
[ 0.987209] x17: 000000000023ffb8 x16: 0000000000000010
[ 0.992508] x15: 000000000000023f x14: ffffffffffffffff
[ 0.997807] x13: 0000000000000018 x12: 0000000000000030
[ 1.003107] x11: 0000000000000003 x10: 0101010101010101
[ 1.008406] x9 : ffffffffffffffff x8 : 7f7f7f7f7f7f7f7f
[ 1.013706] x7 : fefefeff646c606d x6 : 0000000000000000
[ 1.019005] x5 : ffff0000112596c8 x4 : 0000000000000008
[ 1.024304] x3 : 0000000000000003 x2 : 0000000000000001
[ 1.029604] x1 : ffff00001005bb58 x0 : 0000000000000000
[ 1.034905] Call trace:
[ 1.037341] imx_scu_call_rpc+0x114/0x158
[ 1.041334] imx_scu_irq_group_enable+0x74/0xc4
[ 1.045856] imx_sc_wdt_probe+0x24/0x150
[ 1.049766] platform_drv_probe+0x4c/0xb0
[ 1.053762] really_probe+0x1f8/0x2c8
[ 1.057407] driver_probe_device+0x58/0xfc
[ 1.061490] device_driver_attach+0x68/0x70
[ 1.065660] __driver_attach+0x94/0xdc
[ 1.069397] bus_for_each_dev+0x64/0xc0
[ 1.073220] driver_attach+0x20/0x28
[ 1.076782] bus_add_driver+0x148/0x1fc
[ 1.080601] driver_register+0x68/0x120
[ 1.084424] __platform_driver_register+0x4c/0x54
[ 1.089120] imx_sc_wdt_driver_init+0x18/0x20
[ 1.093463] do_one_initcall+0x58/0x1b8
[ 1.097287] kernel_init_freeable+0x1cc/0x288
[ 1.101630] kernel_init+0x10/0x100
[ 1.105101] ret_from_fork+0x10/0x18
[ 1.108669] ---[ end trace 9e03302114457de9 ]---
[ 1.113296] enable irq failed, group 1, mask 1, ret -22
To avoid such scenario, return -EPROBE_DEFER in imx_scu_irq_group_enable()
API if SCU IPC is NOT ready, then module driver which calls this API
in probe phase will defer probe after SCU IPC ready.
Fixes: 851826c7566e ("firmware: imx: enable imx scu general irq function")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The System Controller Firmware (SCFW) controls RTC, thermal
and WDOG etc., these resources' interrupt function are managed
by SCU. When any IRQ pending, SCU will notify Linux via MU general
interrupt channel #3, and Linux kernel needs to call SCU APIs
to get IRQ status and notify each module to handle the interrupt.
Since there is no data transmission for SCU IRQ notification, so
doorbell mode is used for this MU channel, and SCU driver will
use notifier mechanism to broadcast to every module which registers
the SCU block notifier.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
Anson Huang
Ben Dooks (Codethink)