summaryrefslogtreecommitdiffstats
path: root/drivers/edac
AgeCommit message (Collapse)Author
2017-12-16EDAC, i5000, i5400: Fix definition of NRECMEMB registerJérémy Lefaure
[ Upstream commit a8c8261425649da58bdf08221570e5335ad33a31 ] In the i5000 and i5400 drivers, the NRECMEMB register is defined as a 16-bit value, which results in wrong shifts in the code, as reported by sparse. In the datasheets ([1], section 3.9.22.20 and [2], section 3.9.22.21), this register is a 32-bit register. A u32 value for the register fixes the wrong shifts warnings and matches the datasheet. Also fix the mask to access to the CAS bits [27:16] in the i5000 driver. [1]: https://www.intel.com/content/dam/doc/datasheet/5000p-5000v-5000z-chipset-memory-controller-hub-datasheet.pdf [2]: https://www.intel.se/content/dam/doc/datasheet/5400-chipset-memory-controller-hub-datasheet.pdf Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170629005729.8478-1-jeremy.lefaure@lse.epita.fr Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macroJérémy Lefaure
[ Upstream commit e61555c29c28a4a3b6ba6207f4a0883ee236004d ] The MTR_DRAM_WIDTH macro returns the data width. It is sometimes used as if it returned a boolean true if the width if 8. Fix the tests where MTR_DRAM_WIDTH is misused. Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170309011809.8340-1-jeremy.lefaure@lse.epita.fr Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09EDAC, sb_edac: Fix missing break in switchGustavo A. R. Silva
[ Upstream commit a8e9b186f153a44690ad0363a56716e7077ad28c ] Add missing break statement in order to prevent the code from falling through. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20171016174029.GA19757@embeddedor.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-17EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callbackTony Luck
[ Upstream commit c4fc1956fa31003bfbe4f597e359d751568e2954 ] Both of these drivers can return NOTIFY_BAD, but this terminates processing other callbacks that were registered later on the chain. Since the driver did nothing to log the error it seems wrong to prevent other interested parties from seeing it. E.g. neither of them had even bothered to check the type of the error to see if it was a memory error before the return NOTIFY_BAD. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/72937355dd92318d2630979666063f8a2853495b.1461864507.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-05-10x86 EDAC, sb_edac.c: Repair damage introduced when "fixing" channel addressTony Luck
[ Upstream commit ff15e95c82768d589957dbb17d7eb7dba7904659 ] In commit: eb1af3b71f9d ("Fix computation of channel address") I switched the "sck_way" variable from holding the log2 value read from the h/w to instead be the actual number. Unfortunately it is needed in log2 form when used to shift the address. Tested-by: Patrick Geary <patrickg@supermicro.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac@vger.kernel.org Cc: stable@vger.kernel.org Fixes: eb1af3b71f9d ("Fix computation of channel address") Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18EDAC/sb_edac: Fix computation of channel addressLuck, Tony
[ Upstream commit eb1af3b71f9d83e45f2fd2fd649356e98e1c582c ] Large memory Haswell-EX systems with multiple DIMMs per channel were sometimes reporting the wrong DIMM. Found three problems: 1) Debug printouts for socket and channel interleave were not interpreting the register fields correctly. The socket interleave field is a 2^X value (0=1, 1=2, 2=4, 3=8). The channel interleave is X+1 (0=1, 1=2, 2=3. 3=4). 2) Actual use of the socket interleave value didn't interpret as 2^X 3) Conversion of address to channel address was complicated, and wrong. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-12EDAC, amd64_edac: Shift wrapping issue in f1x_get_norm_dct_addr()Dan Carpenter
[ Upstream commit 6f3508f61c814ee852c199988a62bd954c50dfc1 ] dct_sel_base_off is declared as a u64 but we're only using the lower 32 bits because of a shift wrapping bug. This can possibly truncate the upper 16 bits of DctSelBaseOffset[47:26], causing us to misdecode the CS row. Fixes: c8e518d5673d ('amd64_edac: Sanitize f10_get_base_addr_offset') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20160120095451.GB19898@mwanda Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-02-02EDAC: Robustify workqueues destructionBorislav Petkov
[ Upstream commit fcd5c4dd8201595d4c598c9cca5e54760277d687 ] EDAC workqueue destruction is really fragile. We cancel delayed work but if it is still running and requeues itself, we still go ahead and destroy the workqueue and the queued work explodes when workqueue core attempts to run it. Make the destruction more robust by switching op_state to offline so that requeuing stops. Cancel any pending work *synchronously* too. EDAC i7core: Driver loaded. general protection fault: 0000 [#1] SMP CPU 12 Modules linked in: Supported: Yes Pid: 0, comm: kworker/0:1 Tainted: G IE 3.0.101-0-default #1 HP ProLiant DL380 G7 RIP: 0010:[<ffffffff8107dcd7>] [<ffffffff8107dcd7>] __queue_work+0x17/0x3f0 < ... regs ...> Process kworker/0:1 (pid: 0, threadinfo ffff88019def6000, task ffff88019def4600) Stack: ... Call Trace: call_timer_fn run_timer_softirq __do_softirq call_softirq do_softirq irq_exit smp_apic_timer_interrupt apic_timer_interrupt intel_idle cpuidle_idle_call cpu_idle Code: ... RIP __queue_work RSP <...> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-09-16EDAC, ppc4xx: Access mci->csrows array elements properlyMichael Walle
[ Upstream commit 5c16179b550b9fd8114637a56b153c9768ea06a5 ] The commit de3910eb79ac ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") changed the memory allocation for the csrows member. But ppc4xx_edac was forgotten in the patch. Fix it. Signed-off-by: Michael Walle <michael@walle.cc> Cc: <stable@vger.kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.cc Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-07-13sb_edac: Fix erroneous bytes->gigabytes conversionJim Snow
[ Upstream commit ece9210859abb2cc0126f8adbfbbdee668d4906a ] commit 8c009100295597f23978c224aec5751a365bc965 upstream. Signed-off-by: Jim Snow <jim.snow@intel.com> Signed-off-by: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> [ vlee: Backported to 3.14. Adjusted context. ] Signed-off-by: Vinson Lee <vlee@twitter.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-09x86, mce, severity: Extend the the mce_severity mechanism to handle ↵Chen Yucong
UCNA/DEFERRED error [ Upstream commit e3480271f59253cb60d030aa5e615bf00b731fea ] Until now, the mce_severity mechanism can only identify the severity of UCNA error as MCE_KEEP_SEVERITY. Meanwhile, it is not able to filter out DEFERRED error for AMD platform. This patch extends the mce_severity mechanism for handling UCNA/DEFERRED error. In order to do this, the patch introduces a new severity level - MCE_UCNA/DEFERRED_SEVERITY. In addition, mce_severity is specific to machine check exception, and it will check MCIP/EIPV/RIPV bits. In order to use mce_severity mechanism in non-exception context, the patch also introduces a new argument (is_excp) for mce_severity. `is_excp' is used to explicitly specify the calling context of mce_severity. Reviewed-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Signed-off-by: Chen Yucong <slaoub@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-04-16sb_edac: Fix typo computing number of banksTony Luck
[ Upstream commit fec53af531dd040e41fe358abe00b33747af2688 ] Code will always think there are 16 banks because of a typo Reported-by: Misha Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-04-16sb_edac: Fix discovery of top-of-low-memory for HaswellTony Luck
[ Upstream commit f7cf2a22a2896d3b3595b71d7936b6d7a3316b00 ] Haswell moved the TOLM/TOHM registers to a different device and offset. The sb_edac driver accounted for the change of device, but not for the new offset. There was also a typo in the constant to fill in the low 26 bits (was 0x1ffffff, should be 0x3ffffff). This resulted in a bogus value for the top of low memory: EDAC DEBUG: get_memory_layout: TOLM: 0.032 GB (0x0000000001ffffff) which would result in EDAC refusing to translate addresses for errors above the bogus value and below 4GB: sbridge MC3: HANDLING MCE MEMORY ERROR sbridge MC3: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010090 sbridge MC3: TSC 0 sbridge MC3: ADDR 2000000 sbridge MC3: MISC 523eac86 sbridge MC3: PROCESSOR 0:306f3 TIME 1414600951 SOCKET 0 APIC 0 MC3: 1 CE Error at TOLM area, on addr 0x02000000 on any memory ( page:0x0 offset:0x0 grain:32 syndrome:0x0) With the fix we see the correct TOLM value: DEBUG: get_memory_layout: TOLM: 2.048 GB (0x000000007fffffff) and we decode address 2000000 correctly: sbridge MC3: HANDLING MCE MEMORY ERROR sbridge MC3: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010090 sbridge MC3: TSC 0 sbridge MC3: ADDR 2000000 sbridge MC3: MISC 523e1086 sbridge MC3: PROCESSOR 0:306f3 TIME 1414601319 SOCKET 0 APIC 0 DEBUG: get_memory_error_data: SAD interleave package: 0 = CPU socket 0, HA 0, shiftup: 0 DEBUG: get_memory_error_data: TAD#0: address 0x0000000002000000 < 0x000000007fffffff, socket interleave 1, channel interleave 4 (offset 0x00000000), index 0, base ch: 0, ch mask: 0x01 DEBUG: get_memory_error_data: RIR#0, limit: 4.095 GB (0x00000000ffffffff), way: 1 DEBUG: get_memory_error_data: RIR#0: channel address 0x00200000 < 0xffffffff, RIR interleave 0, index 0 DEBUG: sbridge_mce_output_error: area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0 MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x2000 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0) Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-03-06EDAC, amd64_edac: Prevent OOPS with >16 memory controllersDaniel J Blueman
commit 0c510cc83bdbaac8406f4f7caef34f4da0ba35ea upstream. When DRAM errors occur on memory controllers after EDAC_MAX_MCS (16), the kernel fatally dereferences unallocated structures, see splat below; this occurs on at least NumaConnect systems. Fix by checking if a memory controller info structure was found. BUG: unable to handle kernel NULL pointer dereference at 0000000000000320 IP: [<ffffffff819f714f>] decode_bus_error+0x2f/0x2b0 PGD 2f8b5a3067 PUD 2f8b5a2067 PMD 0 Oops: 0000 [#2] SMP Modules linked in: CPU: 224 PID: 11930 Comm: stream_c.exe.gn Tainted: G D 3.19.0 #1 Hardware name: Supermicro H8QGL/H8QGL, BIOS 3.5b 01/28/2015 task: ffff8807dbfb8c00 ti: ffff8807dd16c000 task.ti: ffff8807dd16c000 RIP: 0010:[<ffffffff819f714f>] [<ffffffff819f714f>] decode_bus_error+0x2f/0x2b0 RSP: 0000:ffff8907dfc03c48 EFLAGS: 00010297 RAX: 0000000000000001 RBX: 9c67400010080a13 RCX: 0000000000001dc6 RDX: 000000001dc61dc6 RSI: ffff8907dfc03df0 RDI: 000000000000001c RBP: ffff8907dfc03ce8 R08: 0000000000000000 R09: 0000000000000022 R10: ffff891fffa30380 R11: 00000000001cfc90 R12: 0000000000000008 R13: 0000000000000000 R14: 000000000000001c R15: 00009c6740001000 FS: 00007fa97ee18700(0000) GS:ffff8907dfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000320 CR3: 0000003f889b8000 CR4: 00000000000407e0 Stack: 0000000000000000 ffff8907dfc03df0 0000000000000008 9c67400010080a13 000000000000001c 00009c6740001000 ffff8907dfc03c88 ffffffff810e4f9a ffff8907dfc03ce8 ffffffff81b375b9 0000000000000000 0000000000000010 Call Trace: <IRQ> ? vprintk_default ? printk amd_decode_mce notifier_call_chain atomic_notifier_call_chain mce_log machine_check_poll mce_timer_fn ? mce_cpu_restart call_timer_fn.isra.29 run_timer_softirq __do_softirq irq_exit smp_apic_timer_interrupt apic_timer_interrupt <EOI> ? down_read_trylock __do_page_fault ? __schedule do_page_fault page_fault Signed-off-by: Daniel J Blueman <daniel@numascale.com> Link: http://lkml.kernel.org/r/1424144078-24589-1-git-send-email-daniel@numascale.com [ Boris: massage commit message ] Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06sb_edac: Fix detection on SNB machinesBorislav Petkov
commit 11249e73992981e31fd50e7231da24fad68e3320 upstream. d0585cd815fa ("sb_edac: Claim a different PCI device") changed the probing of sb_edac to look for PCI device 0x3ca0: 3f:0e.0 System peripheral: Intel Corporation Xeon E5/Core i7 Processor Home Agent (rev 07) 00: 86 80 a0 3c 00 00 00 00 07 00 80 08 00 00 80 00 ... but we're matching for 0x3ca8, i.e. PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA in sbridge_probe() therefore the probing fails. Changing it to probe for 0x3ca0 (PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0), .i.e., the 14.0 device, fixes the issue and driver loads successfully again: [ 2449.013120] EDAC DEBUG: sbridge_init: [ 2449.017029] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 2449.022368] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:3ca0 [ 2449.028498] EDAC sbridge: Seeking for: PCI ID 8086:3ca0 [ 2449.033768] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 [ 2449.039028] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:3ca8 [ 2449.045155] EDAC sbridge: Seeking for: PCI ID 8086:3ca8 ... Add a debug printk while at it to be able to catch the failure in the future and dump driver version on successful load. Fixes: d0585cd815fa ("sb_edac: Claim a different PCI device") Acked-by: Aristeu Rozanski <aris@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Acked-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-22e7xxx_edac: Report CE events properlyJason Baron
Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/e6dd616f2cd51583a7e77af6f639b86313c74144.1413405053.git.jbaron@akamai.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-22cpc925_edac: Report UE events properlyJason Baron
Fix UE event being reported as HW_EVENT_ERR_CORRECTED. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/8beb13803500076fef827eab33d523e355d83759.1413405053.git.jbaron@akamai.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-22i82860_edac: Report CE events properlyJason Baron
Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/7aee8e244a32ff86b399a8f966c4aae70296aae0.1413405053.git.jbaron@akamai.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-22i3200_edac: Report CE events properlyJason Baron
Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/d02465b4f30314b390c12c061502eda5e9d29c52.1413405053.git.jbaron@akamai.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-10-10Merge tag 'edac/v3.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull edac updates from Mauro Carvalho Chehab: "Nothing really exiting here: just one bug fix at sb_edac, and some changes to allow other drivers to use some shared PCI addresses" * tag 'edac/v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: Claim a different PCI device Move Intel SNB device ids from sb_edac to pci_ids.h sb_edac: avoid INTERNAL ERROR message in EDAC with unspecified channel
2014-10-08Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. Most of the new code is for the Keystone Navigator driver, which is new base support that is going to be needed for their hardware accelerated network driver and other units. Most of the commits are for moving old code around from at91 and omap for things that are done in device drivers nowadays. - at91: move reset, poweroff, memory and clocksource code into drivers directories - socfpga: add edac driver (through arm-soc, as requested by Boris) - omap: move omap-intc code to drivers/irqchip - sunxi: added an RTC driver for sun6i - omap: mailbox driver related changes - keystone: support for the "Navigator" component - versatile: new reboot, led and soc drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits) bus: arm-ccn: Fix spurious warning message leds: add device tree bindings for register bit LEDs soc: add driver for the ARM RealView power: reset: driver for the Versatile syscon reboot leds: add a driver for syscon-based LEDs drivers/soc: ti: fix build break with modules MAINTAINERS: Add Keystone Multicore Navigator drivers entry soc: ti: add Keystone Navigator DMA support Documentation: dt: soc: add Keystone Navigator DMA bindings soc: ti: add Keystone Navigator QMSS driver Documentation: dt: soc: add Keystone Navigator QMSS bindings rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc rtc: sun6i: Add sun6i RTC driver irqchip: omap-intc: remove unnecessary comments irqchip: omap-intc: correct maximum number or MIR registers irqchip: omap-intc: enable TURBO idle mode irqchip: omap-intc: enable IP protection irqchip: omap-intc: remove unnecesary of_address_to_resource() call irqchip: omap-intc: comment style cleanup irqchip: omap-intc: minor improvement to omap_irq_pending() ...
2014-10-08sb_edac: Claim a different PCI deviceAndy Lutomirski
sb_edac controls a large number of different PCI functions. Rather than registering as a normal PCI driver for all of them, it registers for just one so that it gets probed and, at probe time, it looks for all the others. Coincidentally, the device it registers for also contains the SMBUS registers, so the PCI core will refuse to probe both sb_edac and a future iMC SMBUS driver. The drivers don't actually conflict, so just change sb_edac's device table to probe a different device. An alternative fix would be to merge the two drivers, but sb_edac will also refuse to load on non-ECC systems, whereas i2c_imc would still be useful without ECC. The only user-visible change should be that sb_edac appears to bind a different device. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Rui Wang <ruiv.wang@gmail.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-08Move Intel SNB device ids from sb_edac to pci_ids.hAndy Lutomirski
The i2c_imc driver will use two of them, and moving only part of the list seems messier. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-08sb_edac: avoid INTERNAL ERROR message in EDAC with unspecified channelSeth Jennings
Intel IA32 SDM Table 15-14 defines channel 0xf as 'not specified', but EDAC doesn't know about this and returns and INTERNAL ERROR when the channel is greater than NUM_CHANNELS: kernel: [ 1538.886456] CPU 0: Machine Check Exception: 0 Bank 1: 940000000000009f kernel: [ 1538.886669] TSC 2bc68b22e7e812 ADDR 46dae7000 MISC 0 PROCESSOR 0:306e4 TIME 1390414572 SOCKET 0 APIC 0 kernel: [ 1538.971948] EDAC MC1: INTERNAL ERROR: channel value is out of range (15 >= 4) kernel: [ 1538.972203] EDAC MC1: 0 CE memory read error on unknown memory (slot:0 page:0x46dae7 offset:0x0 grain:0 syndrome:0x0 - area:DRAM err_code:0000:009f socket:1 channel_mask:1 rank:0) This commit changes sb_edac to forward a channel of -1 to EDAC if the channel is not specified. edac_mc_handle_error() sets the channel to -1 internally after the error message anyway, so this commit should have no effect other than avoiding the INTERNAL ERROR message when the channel is not specified. Signed-off-by: Seth Jennings <sjenning@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-30mpc85xx_edac: Make L2 interrupt shared tooBorislav Petkov
The other two interrupt handlers in this driver are shared, except this one. When loading the driver, it fails like this. So make the IRQ line shared. Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software mpc85xx_mc_err_probe: No ECC DIMMs discovered EDAC DEVICE0: Giving out device to module MPC85xx_edac controller mpc85xx_l2_err: DEV mpc85xx_l2_err (INTERRUPT) genirq: Flags mismatch irq 16. 00000000 ([EDAC] L2 err) vs. 00000080 ([EDAC] PCI err) mpc85xx_l2_err_probe: Unable to request irq 16 for MPC85xx L2 err remove_proc_entry: removing non-empty directory 'irq/16', leaking at least 'aerdrv' ------------[ cut here ]------------ WARNING: at fs/proc/generic.c:521 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc5-dirty #1 task: ee058000 ti: ee046000 task.ti: ee046000 NIP: c016c0c4 LR: c016c0c4 CTR: c037b51c REGS: ee047c10 TRAP: 0700 Not tainted (3.17.0-rc5-dirty) MSR: 00029000 <CE,EE,ME> CR: 22008022 XER: 20000000 GPR00: c016c0c4 ee047cc0 ee058000 00000053 00029000 00000000 c037c744 00000003 GPR08: c09aab28 c09aab24 c09aab28 00000156 20008028 00000000 c0002ac8 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000139 c0950394 GPR24: c09f0000 ee5585b0 ee047d08 c0a10000 ee047d08 ee15f808 00000002 ee03f660 NIP [c016c0c4] remove_proc_entry LR [c016c0c4] remove_proc_entry Call Trace: remove_proc_entry (unreliable) unregister_irq_proc free_desc irq_free_descs mpc85xx_l2_err_probe platform_drv_probe really_probe __driver_attach bus_for_each_dev bus_add_driver driver_register mpc85xx_mc_init do_one_initcall kernel_init_freeable kernel_init ret_from_kernel_thread Instruction dump: ... Reported-and-tested-by: <lpb_098@163.com> Acked-by: Johannes Thumshirn <johannes.thumshirn@men.de> Cc: stable@vger.kernel.org Signed-off-by: Borislav Petkov <bp@suse.de>
2014-09-23amd64_edac: Modify usage of amd64_read_dct_pci_cfg()Aravind Gopalakrishnan
Rationale behind this change: - F2x1xx addresses were stopped from being mapped explicitly to DCT1 from F15h (OR) onwards. They use _dct[0:1] mechanism to access the registers. So we should move away from using address ranges to select DCT for these families. - On newer processors, the address ranges used to indicate DCT1 (0x140, 0x1a0) have different meanings than what is assumed currently. Changes introduced: - amd64_read_dct_pci_cfg() now takes in dct value and uses it for 'selecting the dct' - Update usage of the function. Keep in mind that different families have specific handling requirements - Remove [k8|f10]_read_dct_pci_cfg() as they don't do much different from amd64_read_pci_cfg() - Move the k8 specific check to amd64_read_pci_cfg - Remove f15_read_dct_pci_cfg() and move logic to amd64_read_dct_pci_cfg() - Remove now needless .read_dct_pci_cfg Testing: - Tested on Fam 10h; Fam15h Models: 00h, 30h; Fam16h using 'EDAC_DEBUG' and mce_amd_inj - driver obtains info from F2x registers and caches it in pvt structures correctly - ECC decoding works fine Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com> Link: http://lkml.kernel.org/r/1410799058-3149-1-git-send-email-aravind.gopalakrishnan@amd.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-09-15ppc4xx_edac: Fix build error caused by wrong member accessPranith Kumar
Fix the following error drivers/edac/ppc4xx_edac.c:977:45: error: request for member 'dimm' in something not a structure or union by changing member access to pointer dereference. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Link: http://lkml.kernel.org/r/1408482646-22541-1-git-send-email-bobby.prani@gmail.com CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2014-09-04edac: altera: Add Altera SDRAM EDAC supportThor Thayer
This patch adds support for the CycloneV and ArriaV SDRAM controllers. Correction and reporting of SBEs, Panic on DBEs. There was a discussion thread on whether this driver should be an mfd driver or just make use of syscon, which is already a mfd. Ultimately, the decision to use a simple syscon interface was reached.[1] [1] https://lkml.org/lkml/2014/7/30/514 [dinguyen] Fixed Kconfig to have EDAC_ALTERA_MC as a tristate to prevent a build failure for allmodconfig. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Acked-by: Borislav Petkov <bp@suse.de> [dinguyen] cleaned up commit message Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2014-09-02EDAC: Fix mem_types strings typeBorislav Petkov
This one got forgotten during an earlier cleanup. Signed-off-by: Borislav Petkov <bp@suse.de>
2014-08-15Merge branch 'linux_next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull EDAC updates from Mauro Carvalho Chehab. * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: add support for Haswell based systems sb_edac: Fix mix tab/spaces alignments edac: add DDR4 and RDDR4 sb_edac: remove bogus assumption on mc ordering sb_edac: make minimal use of channel_mask sb_edac: fix socket detection on Ivy Bridge controllers sb_edac: update Kconfig description sb_edac: search devices using product id sb_edac: make RIR limit retrieval per model sb_edac: make node id retrieval per model sb_edac: make memory type detection per memory controller
2014-08-14Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull device tree updates from Grant Likely: "The branch contains the following device tree changes the v3.17 merge window: Group changes to the device tree. In preparation for adding device tree overlay support, OF_DYNAMIC is reworked so that a set of device tree changes can be prepared and applied to the tree all at once. OF_RECONFIG notifiers see the most significant change here so that users always get a consistent view of the tree. Notifiers generation is moved from before a change to after it, and notifiers for a group of changes are emitted after the entire block of changes have been applied Automatic console selection from DT. Console drivers can now use of_console_check() to see if the device node is specified as a console device. If so then it gets added as a preferred console. UART devices get this support automatically when uart_add_one_port() is called. DT unit tests no longer depend on pre-loaded data in the device tree. Data is loaded dynamically at the start of unit tests, and then unloaded again when the tests have completed. Also contains a few bugfixes for reserved regions and early memory setup" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: (21 commits) of: Fixing OF Selftest build error drivers: of: add automated assignment of reserved regions to client devices of: Use proper types for checking memory overflow of: typo fix in __of_prop_dup() Adding selftest testdata dynamically into live tree of: Add todo tasklist for Devicetree of: Transactional DT support. of: Reorder device tree changes and notifiers of: Move dynamic node fixups out of powerpc and into common code of: Make sure attached nodes don't carry along extra children of: Make devicetree sysfs update functions consistent. of: Create unlocked versions of node and property add/remove functions OF: Utility helper functions for dynamic nodes of: Move CONFIG_OF_DYNAMIC code into a separate file of: rename of_aliases_mutex to just of_mutex of/platform: Fix of_platform_device_destroy iteration of devices of: Migrate of_find_node_by_name() users to for_each_node_by_name() tty: Update hypervisor tty drivers to use core stdout parsing code. arm/versatile: Add the uart as the stdout device. of: Enable console on serial ports specified by /chosen/stdout-path ...
2014-08-04Merge branch 'x86-ras-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Ingo Molnar: "The main changes in this cycle are: - RAS tracing/events infrastructure, by Gong Chen. - Various generalizations of the APEI code to make it available to non-x86 architectures, by Tomasz Nowicki" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ras: Fix build warnings in <linux/aer.h> acpi, apei, ghes: Factor out ioremap virtual memory for IRQ and NMI context. acpi, apei, ghes: Make NMI error notification to be GHES architecture extension. apei, mce: Factor out APEI architecture specific MCE calls. RAS, extlog: Adjust init flow trace, eMCA: Add a knob to adjust where to save event log trace, RAS: Add eMCA trace event interface RAS, debugfs: Add debugfs interface for RAS subsystem CPER: Adjust code flow of some functions x86, MCE: Robustify mcheck_init_device trace, AER: Move trace into unified interface trace, RAS: Add basic RAS trace event x86, MCE: Kill CPU_POST_DEAD
2014-07-14EDAC, MCE, AMD: Add MCE decoding for F15h M60hAravind Gopalakrishnan
Add decoding logic for new Fam15h model 60h. Tested using mce_amd_inj module and works fine. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Link: http://lkml.kernel.org/r/1405098795-4678-1-git-send-email-Aravind.Gopalakrishnan@amd.com [ Boris: simplify a bit. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2014-07-10ie31200_edac: Allocate mci and map mchbar firstJason Baron
Check for memory allocation and mchbar mapping failures before initializing the dimm info tables needlessly. Signed-off-by: Jason Baron <jbaron@akamai.com> Suggested-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/ead8f53e699f1ce21c2e17f3cffb4685d4faf72a.1404939455.git.jbaron@akamai.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-07-04ie31200_edac: Introduce the driverJason Baron
Add a driver for the E3-1200 series of Intel DRAM controllers, based on the following E3-1200 specs: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e3-1200-family-vol-2-datasheet.html http://www.intel.com/content/www/us/en/processors/xeon/xeon-e3-1200v3-vol-2-datasheet.html I've tested this on bad memory hardware, and observed correlating bad reads and uncorrected memory errors as reported by the driver. Tested against: CPU E3-1270 v3 @ 3.50GHz : 8086:0c08 (haswell) CPU E3-1270 V2 @ 3.50GHz : 8086:0158 (ivy bridge) CPU E31270 @ 3.40GHz : 8086:0108 (sandy bridge) Signed-off-by: Jason Baron <jbaron@akamai.com> Link: http://lkml.kernel.org/r/95c83e80dd40b5377e8bb206285c5d95ac623872.1403818526.git.jbaron@akamai.com [ Boris: realign defines ] Signed-off-by: Borislav Petkov <bp@suse.de>
2014-07-04x38_edac: make use of lo_hi_readq()Jason Baron
Convert to the generic API. Signed-off-by: Jason Baron <jbaron@akamai.com> Link: http://lkml.kernel.org/r/bb9a4cbb980cc7b51be75cbfcf644553bf6a04cd.1403818526.git.jbaron@akamai.com Signed-off-by: Borislav Petkov <bp@suse.de>
2014-06-26sb_edac: add support for Haswell based systemsAristeu Rozanski
Haswell memory controllers are very similar to Ivy Bridge and Sandy Bridge ones. This patch adds support to Haswell based systems. [m.chehab@samsung.com: Fix CodingStyle issues] Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26sb_edac: Fix mix tab/spaces alignmentsMauro Carvalho Chehab
We should not have spaces before ^I on alignments. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26edac: add DDR4 and RDDR4Aristeu Rozanski
Haswell memory controller can make use of DDR4 and Registered DDR4 Cc: tony.luck@intel.com Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26sb_edac: remove bogus assumption on mc orderingAristeu Rozanski
When a MC is handled, the correct sbridge_dev is searched based on the node, checking again later with the assumption the first memory controller found is the first socket's memory controller is a bogus assumption. Get rid of it. Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26sb_edac: make minimal use of channel_maskAristeu Rozanski
channel_mask will be used in the future to determine which group of memory modules is causing the errors since when mirroring, lockstep and close page are enabled you can't. While that doesn't happen, use the channel_mask to determine the channel instead of relying on the MC event/exception. Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26sb_edac: fix socket detection on Ivy Bridge controllersAristeu Rozanski
This patch fixes the obvious bug while handling the socket/HA bitmask used in Ivy Bridge memory controllers. Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26sb_edac: update Kconfig descriptionAristeu Rozanski
Kconfig wasn't updated when Ivy Bridge support was added. Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26sb_edac: search devices using product idAristeu Rozanski
This patch changes the way devices are searched by using product id instead of device/function numbers. Tested in a Sandy Bridge and a Ivy Bridge machine to make sure everything works properly. Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26sb_edac: make RIR limit retrieval per modelAristeu Rozanski
Haswell has a different way to retrieve RIR limits, make this procedure per model. Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26sb_edac: make node id retrieval per modelAristeu Rozanski
Haswell has a different way to retrieve the node id, make so this procedure can be reimplemented. Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26sb_edac: make memory type detection per memory controllerAristeu Rozanski
Haswell has different register, offset to determine memory type and supports DDR4 in some models. This patch makes it easier to have a different method depending on the memory controller type. Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26of: Migrate of_find_node_by_name() users to for_each_node_by_name()Grant Likely
There are a bunch of users open coding the for_each_node_by_name() by calling of_find_node_by_name() directly instead of using the macro. This is getting in the way of some cleanups, and the possibility of removing of_find_node_by_name() entirely. Clean it up so that all the users are consistent. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Takashi Iwai <tiwai@suse.de>
2014-06-24EDAC, edac_module.c: Remove unnecessary test on unsigned valueFabian Frederick
unsigned long value is never < 0. Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Link: http://lkml.kernel.org/r/1402341618-10674-1-git-send-email-fabf@skynet.be Signed-off-by: Borislav Petkov <bp@suse.de>
2014-06-23trace, RAS: Add basic RAS trace eventChen, Gong
To avoid confuision and conflict of usage for RAS related trace event, add an unified RAS trace event stub. Start a RAS subsystem menu which will be fleshed out in time, when more features get added to it. Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Link: http://lkml.kernel.org/r/1402475691-30045-2-git-send-email-gong.chen@linux.intel.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-03 05:11:59 +0000