summaryrefslogtreecommitdiffstats
path: root/drivers/edac/sb_edac.c
AgeCommit message (Collapse)Author
2020-08-26EDAC/{i7core,sb,pnd2,skx}: Fix error event severityTony Luck
commit 45bc6098a3e279d8e391d22428396687562797e2 upstream. IA32_MCG_STATUS.RIPV indicates whether the return RIP value pushed onto the stack as part of machine check delivery is valid or not. Various drivers copied a code fragment that uses the RIPV bit to determine the severity of the error as either HW_EVENT_ERR_UNCORRECTED or HW_EVENT_ERR_FATAL, but this check is reversed (marking errors where RIPV is set as "FATAL"). Reverse the tests so that the error is marked fatal when RIPV is not set. Reported-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200707194324.14884-1-tony.luck@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-14EDAC: Drop the EDAC report status checksTony Luck
When acpi_extlog was added, we were worried that the same error would be reported more than once by different subsystems. But in the ensuing years I've seen complaints that people could not find an error log (because this mechanism suppressed the log they were looking for). Rip it all out. People are smart enough to notice the same address from different reporting mechanisms. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20200214222720.13168-8-tony.luck@intel.com
2020-04-14x86/mce: Fix all mce notifiers to update the mce->kflags bitmaskTony Luck
If the handler took any action to log or deal with the error, set a bit in mce->kflags so that the default handler on the end of the machine check chain can see what has been done. Get rid of NOTIFY_STOP returns. Make the EDAC and dev-mcelog handlers skip over errors already processed by CEC. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20200214222720.13168-5-tony.luck@intel.com
2020-03-24EDAC: Convert to new X86 CPU match macrosThomas Gleixner
The new macro set has a consistent namespace and uses C99 initializers instead of the grufty C89 ones. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20200320131509.673579000@linutronix.de
2019-11-09EDAC: Replace EDAC_DIMM_PTR() macro with edac_get_dimm() functionRobert Richter
The EDAC_DIMM_PTR() macro takes 3 arguments from struct mem_ctl_info. Clean up this interface to only pass the mci struct and replace this macro with a new function edac_get_dimm(). Also introduce an edac_get_dimm_by_index() function for later use. This allows it to get a DIMM pointer only by a given index. This can be useful if the DIMM's position within the layers of the memory controller or the exact size of the layers are unknown. Small style changes made for some hunks after applying the semantic patch. Semantic patch used: @@ expression mci, a, b,c; @@ -EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, a, b, c) +edac_get_dimm(mci, a, b, c) [ bp: Touchups. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jason Baron <jbaron@akamai.com> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-2-rrichter@marvell.com
2019-09-30EDAC: sb_edac: get rid of unused varsMauro Carvalho Chehab
There are several vars unused on this driver, probably because it was a modified copy of another driver. Get rid of them. drivers/edac/sb_edac.c: In function ‘knl_get_dimm_capacity’: drivers/edac/sb_edac.c:1343:16: warning: variable ‘sad_size’ set but not used [-Wunused-but-set-variable] 1343 | u64 sad_base, sad_size, sad_limit = 0; | ^~~~~~~~ drivers/edac/sb_edac.c: In function ‘sbridge_mce_output_error’: drivers/edac/sb_edac.c:2955:8: warning: variable ‘type’ set but not used [-Wunused-but-set-variable] 2955 | char *type, *optype, msg[256]; | ^~~~ drivers/edac/sb_edac.c: In function ‘sbridge_unregister_mci’: drivers/edac/sb_edac.c:3203:22: warning: variable ‘pvt’ set but not used [-Wunused-but-set-variable] 3203 | struct sbridge_pvt *pvt; | ^~~ At top level: drivers/edac/sb_edac.c:266:18: warning: ‘correrrthrsld’ defined but not used [-Wunused-const-variable=] 266 | static const u32 correrrthrsld[] = { | ^~~~~~~~~~~~~ drivers/edac/sb_edac.c:257:18: warning: ‘correrrcnt’ defined but not used [-Wunused-const-variable=] 257 | static const u32 correrrcnt[] = { | ^~~~~~~~~~ Acked-by: Borislav Petkov <bp@alien8.de> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-28x86/intel: Aggregate microserver namingPeter Zijlstra
Currently big microservers have _XEON_D while small microservers have _X, Make it uniformly: _D. for i in `git grep -l "\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*_\(X\|XEON_D\)"` do sed -i -e 's/\(\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*ATOM.*\)_X/\1_D/g' \ -e 's/\(\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*\)_XEON_D/\1_D/g' ${i} done Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: x86@kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20190827195122.677152989@infradead.org
2019-06-20EDAC/sb_edac: Remove redundant update of tad_baseColin Ian King
The variable tad_base is being set to a value that is never read and is being over-written on the next iteration of a for-loop. This assignment is therefore redundant and can be removed. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Tony Luck <tony.luck@intel.com> Cc: James Morse <james.morse@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lkml.kernel.org/r/20190508224201.27120-1-colin.king@canonical.com
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 172Thomas Gleixner
Based on 1 normalized pattern(s): this file may be distributed under the terms of the gnu general public license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 9 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.395589349@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29EDAC, {i7core,sb,skx}_edac: Fix uncorrected error countingTony Luck
The count of errors is picked up from bits 52:38 of the machine check bank status register. But this is the count of *corrected* errors. If an uncorrected error is being logged, the h/w sets this field to 0. Which means that when edac_mc_handle_error() is called, the EDAC core will carefully add zero to the appropriate uncorrected error counts. Signed-off-by: Tony Luck <tony.luck@intel.com> [ Massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Cc: Aristeu Rozanski <aris@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180928213934.19890-1-tony.luck@intel.com
2018-09-22EDAC: Correct DIMM capacity unit symbolQiuxu Zhuo
The {i3200|i7core|sb|skx}_edac drivers show DIMM capacity using the wrong unit symbol: 'Mb' - megabit. Fix them by replacing 'Mb' with 'MiB' - mebibyte. [Tony: These are all "edac_dbg()" messages, so this won't break scripts that parse console logs.] Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Aristeu Rozanski <aris@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/20180919003433.16475-1-tony.luck@intel.com
2018-09-15EDAC, sb_edac: Fix signedness bugs in *_get_ha() functionsLuck, Tony
A static checker gave the following warnings: drivers/edac/sb_edac.c:1030 ibridge_get_ha() warn: signedness bug returning '(-22)' drivers/edac/sb_edac.c:1037 knl_get_ha() warn: signedness bug returning '(-22)' Both because the functions are declared to return a "u8", but try to return -EINVAL for the error case. Fix by returning 0xff (since the caller doesn't look at, or pass on, the return value). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180914201905.GA30946@agluck-desk Signed-off-by: Borislav Petkov <bp@suse.de>
2018-09-11EDAC, sb_edac: Fix reporting for patrol scrubber errorsQiuxu Zhuo
sb_edac sometimes reports the wrong DIMM for a memory error found by the patrol scrubber. That is because the hardware provides only a 4KB page-aligned address for the error case. This means that the EDAC driver will point at the DIMM matching offset 0x0 in the 4KB page, but because of interleaving across channels and ranks, the actual DIMM involved may be different if the error is on some other cache line within the page. Therefore, reconstruct the socket/iMC/channel information from the "mce" structure passed to the EDAC driver. The DIMM cannot be determined, so pass "dimm=-1" to the EDAC core. It will report that all the DIMMs on that channel may be affected. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180907230828.13901-3-tony.luck@intel.com [ Improve comments on the functions to convert bank number to memory controller number. Minor cleanup to commit message. ] Signed-off-by: Tony Luck <tony.luck@intel.com> [ Massage commit message more. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2018-09-11EDAC, sb_edac: Return early on ADDRV bit and address type testQiuxu Zhuo
Users of the mce_register_decode_chain() are called for every logged error. EDAC drivers should check: 1) Is this a memory error? [bit 7 in status register] 2) Is there a valid address? [bit 58 in status register] 3) Is the address a system address? [bitfield 8:6 in misc register] The sb_edac driver performed test "1" twice. Waited far too long to perform check "2". Didn't do check "3" at all. Fix it by moving the test for valid address from sbridge_mce_output_error() into sbridge_mce_check_error() and add a test for the type immediately after. Delete the redundant check for the type of the error from sbridge_mce_output_error(). Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180907230828.13901-2-tony.luck@intel.com [ Re-word commit message. ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2018-09-03EDAC: Get rid of custom ICPU() macroAndy Shevchenko
Replace custom grown macro with generic INTEL_CPU_FAM6() one. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180831082341.72363-1-andriy.shevchenko@linux.intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2018-07-25EDAC, sb_edac: Add support for systems with segmented PCI busesMasayoshi Mizuma
Extend the driver to check whether segment number and bus number matches when deciding how to group memory controller PCI devices to CPU sockets. Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180724190213.26359-1-msys.mizuma@gmail.com [ Cleanup commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2018-03-17EDAC, sb_edac: Remove variable length array usageGustavo A. R. Silva
In preparation for enabling -Wvla, remove VLA and replace it with a fixed-length array instead. Also, remove max_interleave as it is no longer needed. Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180314182131.GA25259@embeddedgus Signed-off-by: Borislav Petkov <bp@suse.de>
2018-02-23EDAC, sb_edac: Fix out of bound writes during DIMM configuration on KNLAnna Karbownik
Commit 3286d3eb906c ("EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4") decreased NUM_CHANNELS from 8 to 4, but this is not enough for Knights Landing which supports up to 6 channels. This caused out-of-bounds writes to pvt->mirror_mode and pvt->tolm variables which don't pay critical role on KNL code path, so the memory corruption wasn't causing any visible driver failures. The easiest way of fixing it is to change NUM_CHANNELS to 6. Do that. An alternative solution would be to restructure the KNL part of the driver to 2MC/3channel representation. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Anna Karbownik <anna.karbownik@intel.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: jim.m.snow@intel.com Cc: krzysztof.paliswiat@intel.com Cc: lukasz.odzioba@intel.com Cc: qiuxu.zhuo@intel.com Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Fixes: 3286d3eb906c ("EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4") Link: http://lkml.kernel.org/r/1519312693-4789-1-git-send-email-anna.karbownik@intel.com [ Massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-10-19EDAC, sb_edac: Fix missing break in switchGustavo A. R. Silva
Add missing break statement in order to prevent the code from falling through. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20171016174029.GA19757@embeddedor.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-10-11EDAC, sb_edac: Fix missing DIMM sysfs entries with KNL SNC2/SNC4 modeLuis Felipe Sandoval Castro
When figuring out the size of the DIMMs and the cluster mode is SNC2 or SNC4 the current algorithm ignores the contribution of some of the channels resulting in EDAC never knowing of the existence of some DIMMs attached to such channels (thus sysfs is not populated). Instead of selectively iterating from 0 to interlv_ways when looking for all the participants in the interleave, do an exhaustive search and iterate from 0 to KNL_MAX_CHANNELS. The algorithm is already smart enough to consider participants only one time. This works fine in all KNL cluster modes and even when there are missing DIMMs as the contribution of those channels is 0. Signed-off-by: Luis Felipe Sandoval Castro <luis.felipe.sandoval.castro@intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: arozansk@redhat.com Cc: linux-edac <linux-edac@vger.kernel.org> Cc: qiuxu.zhuo@intel.com Link: http://lkml.kernel.org/r/1506606882-90521-1-git-send-email-luis.felipe.sandoval.castro@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-09-27EDAC, sb_edac: Don't create a second memory controller if HA1 is not presentQiuxu Zhuo
Yi Zhang reported the following failure on a 2-socket Haswell (E5-2603v3) server (DELL PowerEdge 730xd): EDAC sbridge: Some needed devices are missing EDAC MC: Removed device 0 for sb_edac.c Haswell SrcID#0_Ha#0: DEV 0000:7f:12.0 EDAC MC: Removed device 1 for sb_edac.c Haswell SrcID#1_Ha#0: DEV 0000:ff:12.0 EDAC sbridge: Couldn't find mci handler EDAC sbridge: Couldn't find mci handler EDAC sbridge: Failed to register device with error -19. The refactored sb_edac driver creates the IMC1 (the 2nd memory controller) if any IMC1 device is present. In this case only HA1_TA of IMC1 was present, but the driver expected to find HA1/HA1_TM/HA1_TAD[0-3] devices too, leading to the above failure. The document [1] says the 'E5-2603 v3' CPU has 4 memory channels max. Yi Zhang inserted one DIMM per channel for each CPU, and did random error address injection test with this patch: 4024 addresses fell in TOLM hole area 12715 addresses fell in CPU_SrcID#0_Ha#0_Chan#0_DIMM#0 12774 addresses fell in CPU_SrcID#0_Ha#0_Chan#1_DIMM#0 12798 addresses fell in CPU_SrcID#0_Ha#0_Chan#2_DIMM#0 12913 addresses fell in CPU_SrcID#0_Ha#0_Chan#3_DIMM#0 12674 addresses fell in CPU_SrcID#1_Ha#0_Chan#0_DIMM#0 12686 addresses fell in CPU_SrcID#1_Ha#0_Chan#1_DIMM#0 12882 addresses fell in CPU_SrcID#1_Ha#0_Chan#2_DIMM#0 12934 addresses fell in CPU_SrcID#1_Ha#0_Chan#3_DIMM#0 106400 addresses were injected totally. The test result shows that all the 4 channels belong to IMC0 per CPU, so the server really only has one IMC per CPU. In the 1st page of chapter 2 in datasheet [2], it also says 'E5-2600 v3' implements either one or two IMCs. For CPUs with one IMC, IMC1 is not used and should be ignored. Thus, do not create a second memory controller if the key HA1 is absent. [1] http://ark.intel.com/products/83349/Intel-Xeon-Processor-E5-2603-v3-15M-Cache-1_60-GHz [2] https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e5-v3-datasheet-vol-2.pdf Reported-and-tested-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: e2f747b1f42a ("EDAC, sb_edac: Assign EDAC memory controller per h/w controller") Link: http://lkml.kernel.org/r/20170913104214.7325-1-qiuxu.zhuo@intel.com [ Massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-09-25EDAC: Add owner check to the x86 platform driversToshi Kani
Change x86 EDAC platform drivers to verify the module owner at the beginning of their module init functions. This allows them to fail their init immediately when ghes_edac is enabled. Similar change can be made to other edac drivers if necessary. Also, remove ".c" from module names of pnp2_edac, sb_edac, and skx_edac. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Suggested-by: Borislav Petkov <bp@alien8.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170823225447.15608-6-toshi.kani@hpe.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-09-21EDAC: Handle return value of kasprintf()Arvind Yadav
kasprintf() can fail and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: linux-edac@vger.kernel.org [ Merged into a single patch, small formatting fixups. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-08-02EDAC, sb_edac: Classify memory mirroring modesQiuxu Zhuo
Basically, there are full memory mirroring and address range partial memory mirroring (supported by Haswell EX and Broadwell EX) modes. a) In full memory mirroring, the memory behind each memory controller is mirrored, i.e. the memory is split into two identical mirrors (primary and secondary), half of the memory is reserved for redundancy. b) In address range partial memory mirroring, the memory size (range) of primary and secondary behind each memory controller can be user defined by the TAD0 register. The rest of memory ranges defined by TAD1/TAD2/... in that memory controller are non-mirrored. For more detail on memory mirroring, see the following link written by Tony Luck: https://01.org/lkp/blogs/tonyluck/2016/address-range-partial-memory-mirroring-linux Currently the sb_edac driver only supports address decoding in full memory mirroring and non-mirroring modes. In address range partial memory mirroring mode, it may fail to decode an address that falls in a non-mirroring area (the following was one of this kind of failed logs). mce: Uncorrected hardware memory error in user-access at 566d53a400 Memory failure: 0x566d53a: Killing einj_mem_uc:4647 due to hardware memory corruption Memory failure: 0x566d53a: recovery action for dirty LRU page: Recovered mce: [Hardware Error]: Machine check events logged EDAC sbridge MC1: HANDLING MCE MEMORY ERROR EDAC sbridge MC1: CPU 48: Machine Check Event: 0 Bank 7: ec00000000010090 EDAC sbridge MC1: TSC 4b914aa5a99dab EDAC sbridge MC1: ADDR 566d53a400 EDAC sbridge MC1: MISC 1443a0c86 EDAC sbridge MC1: PROCESSOR 0:406f1 TIME 1499712764 SOCKET 2 APIC 80 EDAC MC1: 0 UE Can't discover the memory rank for ch addr 0x7fb54e900 on any memory ( page:0x0 offset:0x0 grain:32) mce: [Hardware Error]: Machine check events logged Therefore, classify memory mirroring modes and make the address decoding in address range partial memory mode correct. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170730180651.30060-1-qiuxu.zhuo@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-07-17EDAC: Get rid of mci->mod_verBorislav Petkov
It is a write-only variable so get rid of it. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Robert Richter <rric@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Jason Baron <jbaron@akamai.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Loc Ho <lho@apm.com> Cc: linux-edac@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org
2017-06-14EDAC, sb_edac: Avoid creating SOCK memory controllerQiuxu Zhuo
Xiaolong Ye reported the following failure on Broadwell D server: EDAC sbridge: Some needed devices are missing EDAC MC: Removed device 0 for sbridge_edac.c Broadwell SrcID#0_Ha#0: DEV 0000:ff:12.0 EDAC sbridge: Couldn't find mci handler EDAC sbridge: Failed to register device with error -19. Broadwell D (only IMC0 per socket) and Broadwell X (IMC0 and IMC1 per socket) use the same PCI device IDs for IMC0 per socket, then they share pci_dev_descr_broadwell_table (n_imcs_per_sock=2). In this case, Broadwell D wrongly creates the nonexistent SOCK EDAC memory controller and reports above error messages, since it has no IMC1 per socket. Avoid creating the nonexistent SOCK memory controller. Reported-and-tested-by: Xiaolong Ye <xiaolong.ye@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170608113351.25323-1-qiuxu.zhuo@intel.com [ Massage. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Bump driver version and do some cleanupsQiuxu Zhuo
Collapse 'case:' in *_mci_bind_devs() and update driver version from 1.1.1 to 1.1.2. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170523000934.87971-1-qiuxu.zhuo@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Check if ECC enabled when at least one DIMM is presentQiuxu Zhuo
This is based on previous work by Patrick Geary, see Link. Additional cleanups ontop: - Remove the code to read MCMTR from pci_ha1_ta and CHN_TO_HA macro, now that TA0 and TA1 are unified. - Remove get_pdev_same_bus(), since in get_dimm_config() the variable "pvt->pci_ta" for KNL is also ready, we can simply use pci_read_config_dword(pvt->pci_ta, KNL_MCMTR, &pvt->info.mcmtr) to read MCMTR. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: https://lkml.kernel.org/r/57884350.1030401@supermicro.com Link: http://lkml.kernel.org/r/20170523000910.87925-1-qiuxu.zhuo@intel.com [ Make __populate_dimms() return int. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4Qiuxu Zhuo
We don't need this quirk anymore now that the EDAC memory controller representation matches the hardware. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170523000834.87881-1-qiuxu.zhuo@intel.com [ Commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Carve out dimm-populating loopBorislav Petkov
... to slim down get_dimm_config(). No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Fix mod_nameBorislav Petkov
It is called "sb_edac.c" now. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Assign EDAC memory controller per h/w controllerQiuxu Zhuo
Tony pointed out: "currently the driver pretends there is one big 8-channel memory controller per socket instead of 2 4-channel controllers. This is fine with all memory controller populated with symmetrical DIMM configurations, but runs into difficulties on asymmetrical setups". Restructure the driver to assign an EDAC memory controller to each real h/w memory controller to resolve the issue. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170523000731.87793-1-qiuxu.zhuo@intel.com [ Break some lines at convenient points. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Don't use "Socket#" in the memory controller nameTony Luck
EDAC assigns logical memory controller numbers in the order that we find memory controllers, which depends on which PCI bus they are on. Some systems end up with MC0 on socket0, others (e.g Haswell) have MC0 on socket3. All this is made more confusing for users because we use the string "Socket" while generating names for memory controllers, but the number that we attach there is the memory controller number. E.g. EDAC MC0: Giving out device to module sbridge_edac.c controller Haswell Socket#0: DEV 0000:ff:12.0 (INTERRUPT) Change the names to say "SrcID#%d" (where the number we use is read from the h/w associated with the memory controller instead of some logical number internal to the EDAC driver). New message: EDAC MC0: Giving out device to module sbridge_edac.c controller Haswell SrcID#3: DEV 0000:ff:12.0 (INTERRUPT) Reported-by: Andrey Korolyov <andrey@xdel.ru> Reported-by: Patrick Geary <patrickg@supermicro.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170523000603.87748-1-qiuxu.zhuo@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2017-05-25EDAC, sb_edac: Classify PCI-IDs by topologyQiuxu Zhuo
Each of the PCI device IDs belongs to a CPU socket, or to one of the integrated memory controllers. Provide an enum to specify the domain of each, and distinguish the resource number in each domain: the number of the PCI device IDs per integrated memory controller/socket, and the number of integrated memory controllers per socket. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170523000533.87704-1-qiuxu.zhuo@intel.com [ Realign pci_dev_descr_knl members. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-10EDAC: Rename report status accessorsBorislav Petkov
Change them to have the edac_ prefix. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de>
2017-02-20Merge branch 'ras-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Ingo Molnar: "The main changes in this cycle were: - Assign notifier chain priorities for all RAS related handlers to make the ordering explicit (Borislav Petkov) - Improve the AMD MCA banks sysfs output (Yazen Ghannam) - Various cleanups and restructuring of the x86 RAS code (Borislav Petkov)" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ras, EDAC, acpi: Assign MCE notifier handlers a priority x86/ras: Get rid of mce_process_work() EDAC/mce/amd: Dump TSC value EDAC/mce/amd: Unexport amd_decode_mce() x86/ras/amd/inj: Change dependency x86/ras: Flip the TSC-adding logic x86/ras/amd: Make sysfs names of banks more user-friendly x86/ras/therm_throt: Do not log a fake MCE for thermal events x86/ras/inject: Make it depend on X86_LOCAL_APIC=y
2017-01-24x86/ras, EDAC, acpi: Assign MCE notifier handlers a priorityBorislav Petkov
Assign all notifiers on the MCE decode chain a priority so that they get called in the correct order. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Yazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170123183514.13356-10-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-23EDAC, sb_edac: Get rid of ->show_interleave_mode()Nicolas Iooss
Function sbridge_register_mci() sets pvt->info.show_interleave_mode to knl_show_interleave_mode() on Knight's Landing and show_interleave_mode() anywhere else. Merge show_interleave_mode() and knl_show_interleave_mode() in a single implementation and use it without an indirect function pointer. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170122172806.10412-1-nicolas.iooss_linux@m4x.org [ Call it get_intlv_mode_str(). ] Signed-off-by: Borislav Petkov <bp@suse.de>
2016-12-15edac: rename edac_core.h to edac_mc.hMauro Carvalho Chehab
Now, all left at edac_core.h are at drivers/edac/edac_mc.c, so rename it to edac_mc.h. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-19EDAC, sb_edac: Add Knights Mill supportPiotr Luc
Add Knights Mill (KNM) to the list of CPU models supported by sb_edac. Signed-off-by: Piotr Luc <piotr.luc@intel.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20161013153105.2517-6-piotr.luc@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-10-19EDAC, {sb,skx}_edac: Use Intel model macros instead of open-coding themDave Hansen
We now have symbolic names for a bunch of Intel CPU models via asm/intel-family.h. The original conversion missed the EDAC drivers. Convert them. Signed-off-by: Dave Hansen <dave.hansen@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20160929204321.9FAE5F84@viggo.jf.intel.com [ Remove comment, macro name is descriptive enough. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2016-10-04Merge tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
Pull EDAC updates from Borislav Petkov: "A lot of movement in the EDAC tree this time around, coarse summary below: - Altera Arria10 enablement of NAND, DMA, USB, QSPI and SD-MMC FIFO buffers (Thor Thayer) - split the memory controller part out of mpc85xx and share it with a new Freescale ARM Layerscape driver (York Sun) - amd64_edac fixes (Yazen Ghannam) - misc cleanups, refactoring and fixes all over the place" * tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (37 commits) EDAC, altera: Add IRQ Flags to disable IRQ while handling EDAC, altera: Correct EDAC IRQ error message EDAC, amd64: Autoload module using x86_cpu_id EDAC, sb_edac: Remove NULL pointer check on array pci_tad EDAC: Remove NO_IRQ from powerpc-only drivers EDAC, fsl_ddr: Fix error return code in fsl_mc_err_probe() EDAC, fsl_ddr: Add entry to MAINTAINERS EDAC: Move Doug Thompson to CREDITS EDAC, I3000: Orphan driver EDAC, fsl_ddr: Replace simple_strtoul() with kstrtoul() EDAC, layerscape: Add Layerscape EDAC support EDAC, fsl_ddr: Fix IRQ dispose warning when module is removed EDAC, fsl_ddr: Add support for little endian EDAC, fsl_ddr: Add missing DDR DRAM types EDAC, fsl_ddr: Rename macros and names EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx EDAC, mpc85xx: Replace printk() with pr_* format EDAC, mpc85xx: Drop setting/clearing RFXE bit in HID1 EDAC, altera: Rename MC trigger to common name EDAC, altera: Rename device trigger to common name ...
2016-09-12EDAC, sb_edac: Remove NULL pointer check on array pci_tadColin Ian King
pvt->pci_tad is a NUM_CHANNELS array of struct pci_dev pointers and hence cannot be NULL, so the NULL pointer check on pci_tad is redundant. Remove it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20160908083801.14766-1-colin.king@canonical.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-08-08EDAC, sb_edac: Fix channel reporting on Knights LandingLukasz Odzioba
On Intel Xeon Phi Knights Landing processor family the channels of the memory controller have untypical arrangement - MC0 is mapped to CH3,4,5 and MC1 is mapped to CH0,1,2. This causes the EDAC driver to report the channel name incorrectly. We missed this change earlier, so the code already contains similar comment, but the translation function is incorrect. Without this patch: errors in DIMM_A and DIMM_D were reported in DIMM_D errors in DIMM_B and DIMM_E were reported in DIMM_E errors in DIMM_C and DIMM_F were reported in DIMM_F Correct this. Hubert Chrzaniuk: - rebased to 4.8 - comments and code cleanup Fixes: d0cdf9003140 ("sb_edac: Add Knights Landing (Xeon Phi gen 2) support") Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: lukasz.anaczkowski@intel.com Cc: lukasz.odzioba@intel.com Cc: mchehab@kernel.org Cc: <stable@vger.kernel.org> # v4.5.. Link: http://lkml.kernel.org/r/1469231089-22837-1-git-send-email-lukasz.odzioba@intel.com Signed-off-by: Lukasz Odzioba <lukasz.odzioba@intel.com> [ Boris: Simplify a bit by removing char mc. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2016-07-16EDAC, sb_edac: Fix Knights LandingTony Luck
In commit 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver detection") I broke Knights Landing because I failed to notice that it called a wrapper macro "sbridge_get_all_devices_knl" instead of "sbridge_get_all_devices" like all the other types. Now that we include the processor type in the pci_id_table structure we can skip the wrappers and just have the sbridge_get_all_devices() check the type to decide whether to allow duplicate devices and controllers to have registers spread across buses. Fixes: 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver detection") Tested-by: Lukasz Odzioba <lukasz.odzioba@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-03EDAC, sb_edac: Readd accidentally dropped Broadwell-D supportTony Luck
In commit 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver detection") we switched from using PCI ids to determine which platform we are running on to using CPU model instead. I forgot that Broadwell-DE has its own distinct model number different from Broadwell-EP or -EX. Fixing this isn't just adding a line to the array of cpuids - the exising code assumed a 1:1 mapping between entries in that array and the "enum type" values. Added the type to pci_id_table structure to remove this dependency and allows two Broadwell cpu models. Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: 2c1ea4c700af ("EDAC, sb_edac: Use cpu family/model in driver detection") Link: http://lkml.kernel.org/r/b3cffe40dec6dfe0235a5d52a504f0ba86a07ce7.1464902605.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-06-03EDAC, sb_edac: Fix rank lookup on BroadwellTony Luck
Broadwell made a small change to the rank target register moving the target rank ID field up from bits 16:19 to bits 20:23. Also found that the offset field grew by one bit in the IVY_BRIDGE to HASWELL transition, so fix the RIR_OFFSET() macro too. Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: stable@vger.kernel.org # v3.19+ Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/2943fb819b1f7e396681165db9c12bb3df0e0b16.1464735623.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-05-16Merge tag 'edac_for_4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
Pull EDAC updates from Borislav Petkov: "It was pretty busy in EDAC land this time: - Altera Arria10 L2 cache and On-Chip RAM ECC handling (Thor Thayer) - Remove ad-hoc buffering of MCE records in sb_edac and i7core_edac (Tony Luck) - Do not register sb_edac with pci_register_driver() (Tony Luck) - Add support for Skylake to ie31200_edac (Jason Baron) - Do not register amd64_edac with pci_register_driver() (Borislav Petkov) ... plus the usual round of cleanups and fixes all over the place" * tag 'edac_for_4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (25 commits) EDAC, amd64_edac: Drop pci_register_driver() use EDAC, ie31200_edac: Add Skylake support EDAC, sb_edac: Use cpu family/model in driver detection EDAC, i7core: Remove double buffering of error records EDAC, amd64_edac: Issue driver banner only on success ARM: socfpga: Initialize Arria10 OCRAM ECC on startup EDAC: Increment correct counter in edac_inc_ue_error() EDAC, sb_edac: Remove double buffering of error records EDAC: Fix used after kfree() error in edac_unregister_sysfs() EDAC, altera: Avoid unused function warnings EDAC, altera: Remove useless casts ARM: socfpga: Enable Arria10 OCRAM ECC on startup EDAC, altera: Add Arria10 OCRAM ECC support Documentation: dt: socfpga: Add Altera Arria10 OCRAM binding EDAC, altera: Make OCRAM ECC dependency check generic EDAC, altera: Add register offset for ECC Enable EDAC, altera: Extract error inject operations to a struct fops ARM: socfpga: Enable Arria10 L2 cache ECC on startup EDAC, altera: Add Arria10 L2 Cache ECC handling Documentation, dt, socfpga: Add Altera Arria10 L2 cache binding ...
2016-05-02EDAC, sb_edac: Use cpu family/model in driver detectionTony Luck
Instead of picking a random PCI ID from the dozen or so we need to access, just use x86_match_cpu() to pick based on CPU model number. The choosing of PCI devices has been problematic in the past, see 11249e739929 ("sb_edac: Fix detection on SNB machines") which fixed problems introduced by d0585cd815fa ("sb_edac: Claim a different PCI device"). This is especially ugly if future hardware might not even have EDAC-relevant registers in PCI config space and we would still be required to choose some "random" PCI devices to scan for just so our driver loads. Is this cleaner/clearer? It deletes much more code than it adds. Only tested on Broadwell. The driver loads/unloads and loads again. Still decodes errors too. Signed-off-by: Tony Luck <tony.luck@intel.com> Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-29EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callbackTony Luck
Both of these drivers can return NOTIFY_BAD, but this terminates processing other callbacks that were registered later on the chain. Since the driver did nothing to log the error it seems wrong to prevent other interested parties from seeing it. E.g. neither of them had even bothered to check the type of the error to see if it was a memory error before the return NOTIFY_BAD. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/72937355dd92318d2630979666063f8a2853495b.1461864507.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-20 15:32:19 +0000