aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/dma
AgeCommit message (Collapse)Author
2018-04-04dmaengine: stm32-dma: Improve memory burst managementPierre Yves MORDRET
This patch improves memory burst capability using best burst size according to transferred buffer size from/to memory. >From now on, memory burst is not necessarily same as with peripheral burst one and fifo threshold is directly managed by this driver in order to fit with computed memory burst. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-04-04dmaengine: stm32-dma: fix typo and reported checkpatch warningsPierre Yves MORDRET
Fix typo in a comment and solved reported checkpatch warnings. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-04-04dmaengine: stm32-dma: fix incomplete configuration in cyclic modePierre Yves MORDRET
When in cyclic mode, the configuration is updated after having started the DMA hardware (STM32_DMA_SCR_EN) leading to incomplete configuration of SMxAR registers. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-04-04dmaengine: stm32-dma: threshold manages with bitfield featurePierre Yves MORDRET
>From now on, DMA bitfield is to manage DMA FIFO Threshold. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-04-04dmaengine: rcar-dmac: Fix too early/late system suspend/resume callbacksGeert Uytterhoeven
If serial console wake-up is enabled ("echo enabled > /sys/.../ttySC0/power/wakeup"), and any serial input is received while the system is suspended, serial port input no longer works after system resume. Note that: 1) The system can still be woken up using the serial console, 2) Serial port input keeps working if the system is woken up in some other way (e.g. Wake-on-LAN or gpio-keys), and no serial input was received while suspended. To fix this, replace SET_LATE_SYSTEM_SLEEP_PM_OPS() by SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(), as the callbacks installed by the former happen too early resp. late in the suspend resp. resume process. Reported-by: RVC test team via Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 1131b0a4af911de5 ("dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-27dmaengine: dw-axi-dmac: fix spelling mistake: "catched" -> "caught"Colin Ian King
Trivial fix to spelling mistake in dev_err error message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-27dmaengine: edma: Check the memory allocation for the memcpy dma devicePeter Ujfalusi
If the allocation fails then disable the memcpy support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-27dmaengine: at_xdmac: fix rare residue corruptionMaxime Jayat
Despite the efforts made to correctly read the NDA and CUBC registers, the order in which the registers are read could sometimes lead to an inconsistent state. Re-using the timeline from the comments, this following timing of registers reads could lead to reading NDA with value "@desc2" and CUBC with value "MAX desc1": INITD -------- ------------ |____________________| _______________________ _______________ NDA @desc2 \/ @desc3 _______________________/\_______________ __________ ___________ _______________ CUBC 0 \/ MAX desc1 \/ MAX desc2 __________/\___________/\_______________ | | | | Events:(1)(2) (3)(4) (1) check_nda = @desc2 (2) initd = 1 (3) cur_ubc = MAX desc1 (4) cur_nda = @desc2 This is allowed by the condition ((check_nda == cur_nda) && initd), despite cur_ubc and cur_nda being in the precise state we don't want. This error leads to incorrect residue computation. Fix it by inversing the order in which CUBC and INITD are read. This makes sure that NDA and CUBC are always read together either _before_ INITD goes to 0 or _after_ it is back at 1. The case where NDA is read before INITD is at 0 and CUBC is read after INITD is back at 1 will be rejected by check_nda and cur_nda being different. Fixes: 53398f488821 ("dmaengine: at_xdmac: fix residue corruption") Cc: stable@vger.kernel.org Signed-off-by: Maxime Jayat <maxime.jayat@mobile-devices.fr> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-27dmaengine: mediatek: Add MediaTek High-Speed DMA controller for MT7622 and ↵Sean Wang
MT7623 SoC MediaTek High-Speed DMA controller (HSDMA) on MT7622 and MT7623 SoC has a single ring is dedicated to memory-to-memory transfer through ring based descriptor management. Even though there is only one physical ring available inside HSDMA, the driver can be easily extended to the support of multiple virtual channels processing simultaneously by means of DMA_VIRTUAL_CHANNELS effort. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-22dmaengine: stm32-dmamux: fix a potential buffer overflowPierre-Yves MORDRET
The bitfield dma_inuse is allocated of size dma_requests bits, thus a valid bit address is from 0 to (dma_requests - 1). When find_first_zero_bit() fails, it returns dma_requests as invalid address. Using such address for the following set_bit() is incorrect and, if dma_requests is a multiple of BITS_PER_LONG, it will cause a buffer overflow. Currently this driver is only used in DT stm32h743.dtsi where a safe value dma_requests=16 is not triggering the buffer overflow. Fixed by checking the return value of find_first_zero_bit() _before_ using it. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-19dmaengine: Introduce DW AXI DMAC driverEugeniy Paltsev
This patch adds support for the DW AXI DMAC controller. DW AXI DMAC is a part of HSDK development board from Synopsys. In this driver implementation only DMA_MEMCPY transfers are supported. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-11dmaengine: mv_xor_v2: Fix clock resource by adding a register clockGregory CLEMENT
On the CP110 components which are present on the Armada 7K/8K SoC we need to explicitly enable the clock for the registers. However it is not needed for the AP8xx component, that's why this clock is optional. With this patch both clock have now a name, but in order to be backward compatible, the name of the first clock is not used. It allows to still use this clock with a device tree using the old binding. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-06dmaengine: pl330: fix a race condition in case of threaded irqsQi Hou
When booting up with "threadirqs" in command line, all irq handlers of the DMA controller pl330 will be threaded forcedly. These threads will race for the same list, pl330->req_done. Before the callback, the spinlock was released. And after it, the spinlock was taken. This opened an race window where another threaded irq handler could steal the spinlock and be permitted to delete entries of the list, pl330->req_done. If the later deleted an entry that was still referred to by the former, there would be a kernel panic when the former was scheduled and tried to get the next sibling of the deleted entry. The scenario could be depicted as below: Thread: T1 pl330->req_done Thread: T2 | | | | -A-B-C-D- | Locked | | | | Waiting Del A | | | -B-C-D- | Unlocked | | | | Locked Waiting | | | | Del B | | | | -C-D- Unlocked Waiting | | | Locked | get C via B \ - Kernel panic The kernel panic looked like as below: Unable to handle kernel paging request at virtual address dead000000000108 pgd = ffffff8008c9e000 [dead000000000108] *pgd=000000027fffe003, *pud=000000027fffe003, *pmd=0000000000000000 Internal error: Oops: 96000044 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 85 Comm: irq/59-66330000 Not tainted 4.8.24-WR9.0.0.12_standard #2 Hardware name: Broadcom NS2 SVK (DT) task: ffffffc1f5cc3c00 task.stack: ffffffc1f5ce0000 PC is at pl330_irq_handler+0x27c/0x390 LR is at pl330_irq_handler+0x2a8/0x390 pc : [<ffffff80084cb694>] lr : [<ffffff80084cb6c0>] pstate: 800001c5 sp : ffffffc1f5ce3d00 x29: ffffffc1f5ce3d00 x28: 0000000000000140 x27: ffffffc1f5c530b0 x26: dead000000000100 x25: dead000000000200 x24: 0000000000418958 x23: 0000000000000001 x22: ffffffc1f5ccd668 x21: ffffffc1f5ccd590 x20: ffffffc1f5ccd418 x19: dead000000000060 x18: 0000000000000001 x17: 0000000000000007 x16: 0000000000000001 x15: ffffffffffffffff x14: ffffffffffffffff x13: ffffffffffffffff x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000840 x9 : ffffffc1f5ce0000 x8 : ffffffc1f5cc3338 x7 : ffffff8008ce2020 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : dead000000000200 x2 : dead000000000100 x1 : 0000000000000140 x0 : ffffffc1f5ccd590 Process irq/59-66330000 (pid: 85, stack limit = 0xffffffc1f5ce0020) Stack: (0xffffffc1f5ce3d00 to 0xffffffc1f5ce4000) 3d00: ffffffc1f5ce3d80 ffffff80080f09d0 ffffffc1f5ca0c00 ffffffc1f6f7c600 3d20: ffffffc1f5ce0000 ffffffc1f6f7c600 ffffffc1f5ca0c00 ffffff80080f0998 3d40: ffffffc1f5ce0000 ffffff80080f0000 0000000000000000 0000000000000000 3d60: ffffff8008ce202c ffffff8008ce2020 ffffffc1f5ccd668 ffffffc1f5c530b0 3d80: ffffffc1f5ce3db0 ffffff80080f0d70 ffffffc1f5ca0c40 0000000000000001 3da0: ffffffc1f5ce0000 ffffff80080f0cfc ffffffc1f5ce3e20 ffffff80080bf4f8 3dc0: ffffffc1f5ca0c80 ffffff8008bf3798 ffffff8008955528 ffffffc1f5ca0c00 3de0: ffffff80080f0c30 0000000000000000 0000000000000000 0000000000000000 3e00: 0000000000000000 0000000000000000 0000000000000000 ffffff80080f0b68 3e20: 0000000000000000 ffffff8008083690 ffffff80080bf420 ffffffc1f5ca0c80 3e40: 0000000000000000 0000000000000000 0000000000000000 ffffff80080cb648 3e60: ffffff8008b1c780 0000000000000000 0000000000000000 ffffffc1f5ca0c00 3e80: ffffffc100000000 ffffff8000000000 ffffffc1f5ce3e90 ffffffc1f5ce3e90 3ea0: 0000000000000000 ffffff8000000000 ffffffc1f5ce3eb0 ffffffc1f5ce3eb0 3ec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3ee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fc0: 0000000000000000 0000000000000005 0000000000000000 0000000000000000 3fe0: 0000000000000000 0000000000000000 0000000275ce3ff0 0000000275ce3ff8 Call trace: Exception stack(0xffffffc1f5ce3b30 to 0xffffffc1f5ce3c60) 3b20: dead000000000060 0000008000000000 3b40: ffffffc1f5ce3d00 ffffff80084cb694 0000000000000008 0000000000000e88 3b60: ffffffc1f5ce3bb0 ffffff80080dac68 ffffffc1f5ce3b90 ffffff8008826fe4 3b80: 00000000000001c0 00000000000001c0 ffffffc1f5ce3bb0 ffffff800848dfcc 3ba0: 0000000000020000 ffffff8008b15ae4 ffffffc1f5ce3c00 ffffff800808f000 3bc0: 0000000000000010 ffffff80088377f0 ffffffc1f5ccd590 0000000000000140 3be0: dead000000000100 dead000000000200 0000000000000001 0000000000000000 3c00: 0000000000000000 ffffff8008ce2020 ffffffc1f5cc3338 ffffffc1f5ce0000 3c20: 0000000000000840 0000000000000001 0000000000000000 ffffffffffffffff 3c40: ffffffffffffffff ffffffffffffffff 0000000000000001 0000000000000007 [<ffffff80084cb694>] pl330_irq_handler+0x27c/0x390 [<ffffff80080f09d0>] irq_forced_thread_fn+0x38/0x88 [<ffffff80080f0d70>] irq_thread+0x140/0x200 [<ffffff80080bf4f8>] kthread+0xd8/0xf0 [<ffffff8008083690>] ret_from_fork+0x10/0x40 Code: f2a00838 f9405763 aa1c03e1 aa1503e0 (f9000443) ---[ end trace f50005726d31199c ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 0-1 Kernel Offset: disabled Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt To fix this, re-start with the list-head after dropping the lock then re-takeing it. Reviewed-by: Frank Mori Hess <fmh6jj@gmail.com> Tested-by: Frank Mori Hess <fmh6jj@gmail.com> Signed-off-by: Qi Hou <qi.hou@windriver.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-05dmaengine: imx-sdma: fix pagefault when channel is disabled during interruptThierry Bultel
Add a spinlock and a 'enabled' boolean on channel descriptor, to avoid using buffer descriptors in the interrupt context, when sdma_disable_channel is called meanwhile. Signed-off-by: Thierry Bultel <tbultel@pixelsurmer.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-05dmaengine: rcar-dmac: Check the done lists in rcar_dmac_chan_get_residue()Yoshihiro Shimoda
This patch fixes an issue that a race condition happens between a client driver and the rcar-dmac driver: - The rcar_dmac_isr_transfer_end() is called. - The done list appears, and desc.running is the next active list. - rcar_dmac_chan_get_residue() is called by a client driver before rcar_dmac_isr_channel_thread() is called. - The rcar_dmac_chan_get_residue() will not find any descriptors. - And, the following WARNING happens: WARN(1, "No descriptor for cookie!"); The sh-sci driver with HSCIF (921,600bps) on R-Car H3 can cause this situation. So, this patch checks the done lists in rcar_dmac_chan_get_residue() and returns zero if the done lists has the argument cookie. Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-01dmaengine: qcom: bam_dma: disable runtime pm on remote controlledSrinivas Kandagatla
Remotely controlled BAM instance should not do any power management from CPU side, as cpu can not reliably say if the BAM is busy or not. Disable it for such instances. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-01dmaengine: qcom: bam_dma: do not write to global regs in remote modeSrinivas Kandagatla
BAM_DESC_CNT_TRSHLD register is global register, which can only be written when BAM is in master mode, So check the mode of operation before writing it. Without this check SOC's xPU would catch such access and crash the system. First noticed on DB820c while testing SLIMBus BAM. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-01dmaengine: qcom: bam_dma: get num-channels and num-ees from dtSrinivas Kandagatla
When Linux is master of BAM, it can directly read registers to know number of supported channels, however when its remotely controlled reading these registers would trigger a crash if the BAM is not yet initialized or powered up on the remote side. This patch allows driver to read num-channels and num-ees from Device Tree for remotely controlled BAM. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-01dmaengine: qcom: bam_dma: make bam clk optionalSrinivas Kandagatla
When BAM is remotely controlled it does not sound correct to control its clk on Linux side. Make it optional, so that its not mandatory for remote controlled BAM instances. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-02-27dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3Yoshihiro Shimoda
According to R-Car Gen3 Rev.0.80 manual, the DMATCR can be set to 16,777,215 as maximum. So, this patch fixes the max_chunk_size for safety on all of SoCs. Otherwise, a system may hang if the DMATCR is set to 0 on R-Car Gen3. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-02-12dmaengine: dmatest: add norandom optionYang Shunyong
Existing option noverify disables both random src/dst address offset setup and data verification. Sometimes, we need to control random src/dst address setup and verification separately, such as disabling random to make sure that test covers addresses in all interleaving banks, but data verification is still performed. This patch adds option norandom to disable random offset setup. Option noverify has been changed to disable data verification only. Cc: Joey Zheng <yu.zheng@hxt-semitech.com> Signed-off-by: Yang Shunyong <shunyong.yang@hxt-semitech.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-02-02Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - StrongARM SA1111 updates to modernise and remove cruft - Add StrongARM gpio drivers for board GPIOs - Verify size of zImage is what we expect to avoid issues with appended DTB - nommu updates from Vladimir Murzin - page table read-write-execute checking from Jinbum Park - Broadcom Brahma-B15 cache updates from Florian Fainelli - Avoid failure with kprobes test caused by inappropriately placed kprobes - Remove __memzero optimisation (which was incorrectly being used directly by some drivers) * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits) ARM: 8745/1: get rid of __memzero() ARM: 8744/1: don't discard memblock for kexec ARM: 8743/1: bL_switcher: add MODULE_LICENSE tag ARM: 8742/1: Always use REFCOUNT_FULL ARM: 8741/1: B15: fix unused label warnings ARM: 8740/1: NOMMU: Make sure we do not hold stale data in mem[] array ARM: 8739/1: NOMMU: Setup VBAR/Hivecs for secondaries cores ARM: 8738/1: Disable CONFIG_DEBUG_VIRTUAL for NOMMU ARM: 8737/1: mm: dump: add checking for writable and executable ARM: 8736/1: mm: dump: make the page table dumping seq_file ARM: 8735/1: mm: dump: make page table dumping reusable ARM: sa1100/neponset: add GPIO drivers for control and modem registers ARM: sa1100/assabet: add BCR/BSR GPIO driver ARM: 8734/1: mm: idmap: Mark variables as ro_after_init ARM: 8733/1: hw_breakpoint: Mark variables as __ro_after_init ARM: 8732/1: NOMMU: Allow userspace to access background MPU region ARM: 8727/1: MAINTAINERS: Update brcmstb entries to cover B15 code ARM: 8728/1: B15: Register reboot notifier for KEXEC ARM: 8730/1: B15: Add suspend/resume hooks ARM: 8726/1: B15: Add CPU hotplug awareness ...
2018-01-31Merge tag 'dmaengine-4.16-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This time is smallish update with updates mainly to drivers: - updates to xilinx and zynqmp dma controllers - update reside calculation for rcar controller - more RSTify fixes for documentation - add support for race free transfer termination and updating for users for that - support for new rev of hidma with addition new APIs to get device match data in ACPI/OF - random updates to bunch of other drivers" * tag 'dmaengine-4.16-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (47 commits) dmaengine: dmatest: fix container_of member in dmatest_callback dmaengine: stm32-dmamux: Remove unnecessary platform_get_resource() error check dmaengine: sprd: statify 'sprd_dma_prep_dma_memcpy' dmaengine: qcom_hidma: simplify DT resource parsing dmaengine: xilinx_dma: Free BD consistent memory dmaengine: xilinx_dma: Fix warning variable prev set but not used dmaengine: xilinx_dma: properly configure the SG mode bit in the driver for cdma dmaengine: doc: format struct fields using monospace dmaengine: doc: fix bullet list formatting dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63 dmaengine: cppi41: Fix channel queues array size check dmaengine: imx-sdma: Add MODULE_FIRMWARE dmaengine: xilinx_dma: Fix typos dmaengine: xilinx_dma: Differentiate probe based on the ip type dmaengine: xilinx_dma: fix style issues from checkpatch dmaengine: xilinx_dma: Fix kernel doc warnings dmaengine: xilinx_dma: Fix race condition in the driver for multiple descriptor scenario dmaeninge: xilinx_dma: Fix bug in multiple frame stores scenario in vdma dmaengine: xilinx_dma: Check for channel idle state before submitting dma descriptor dmaengine: zynqmp_dma: Fix race condition in the probe ...
2018-01-31Merge branch 'topic/xilinx' into for-linusVinod Koul
2018-01-31Merge branch 'topic/virt-dma' into for-linusVinod Koul
2018-01-31Merge branch 'topic/timb' into for-linusVinod Koul
2018-01-31Merge branch 'topic/ti' into for-linusVinod Koul
2018-01-31Merge branch 'topic/tegra' into for-linusVinod Koul
2018-01-31Merge branch 'topic/stm' into for-linusVinod Koul
2018-01-31Merge branch 'topic/sprd' into for-linusVinod Koul
2018-01-31Merge branch 'topic/rcar' into for-linusVinod Koul
2018-01-31Merge branch 'topic/qcom_hidma' into for-linusVinod Koul
2018-01-31Merge branch 'topic/qcom' into for-linusVinod Koul
2018-01-31Merge branch 'topic/mic' into for-linusVinod Koul
2018-01-31Merge branch 'topic/imx' into for-linusVinod Koul
2018-01-31Merge branch 'topic/cppi' into for-linusVinod Koul
2018-01-30Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main RCU changes in this cycle were: - Updates to use cond_resched() instead of cond_resched_rcu_qs() where feasible (currently everywhere except in kernel/rcu and in kernel/torture.c). Also a couple of fixes to avoid sending IPIs to offline CPUs. - Updates to simplify RCU's dyntick-idle handling. - Updates to remove almost all uses of smp_read_barrier_depends() and read_barrier_depends(). - Torture-test updates. - Miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) torture: Save a line in stutter_wait(): while -> for torture: Eliminate torture_runnable and perf_runnable torture: Make stutter less vulnerable to compilers and races locking/locktorture: Fix num reader/writer corner cases locking/locktorture: Fix rwsem reader_delay torture: Place all torture-test modules in one MAINTAINERS group rcutorture/kvm-build.sh: Skip build directory check rcutorture: Simplify functions.sh include path rcutorture: Simplify logging rcutorture/kvm-recheck-*: Improve result directory readability check rcutorture/kvm.sh: Support execution from any directory rcutorture/kvm.sh: Use consistent help text for --qemu-args rcutorture/kvm.sh: Remove unused variable, `alldone` rcutorture: Remove unused script, config2frag.sh rcutorture/configinit: Fix build directory error message rcutorture: Preempt RCU-preempt readers more vigorously torture: Reduce #ifdefs for preempt_schedule() rcu: Remove have_rcu_nocb_mask from tree_plugin.h rcu: Add comment giving debug strategy for double call_rcu() tracing, rcu: Hide trace event rcu_nocb_wake when not used ...
2018-01-30dmaengine: dmatest: fix container_of member in dmatest_callbackYang Shunyong
The type of arg passed to dmatest_callback is struct dmatest_done. It refers to test_done in struct dmatest_thread, not done_wait. Fixes: 6f6a23a213be ("dmaengine: dmatest: move callback wait ...") Signed-off-by: Yang Shunyong <shunyong.yang@hxt-semitech.com> Acked-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-21Merge branches 'fixes', 'misc', 'sa1111' and 'sa1100-for-next' into for-nextRussell King
2018-01-21ARM: 8745/1: get rid of __memzero()Nicolas Pitre
The __memzero assembly code is almost identical to memset's except for two orr instructions. The runtime performance of __memset(p, n) and memset(p, 0, n) is accordingly almost identical. However, the memset() macro used to guard against a zero length and to call __memzero at compile time when the fill value is a constant zero interferes with compiler optimizations. Arnd found tha the test against a zero length brings up some new warnings with gcc v8: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82103 And successively rremoving the test against a zero length and the call to __memzero optimization produces the following kernel sizes for defconfig with gcc 6: text data bss dec hex filename 12248142 6278960 413588 18940690 1210312 vmlinux.orig 12244474 6278960 413588 18937022 120f4be vmlinux.no_zero_test 12239160 6278960 413588 18931708 120dffc vmlinux.no_memzero So it is probably not worth keeping __memzero around given that the compiler can do a better job at inlining trivial memset(p,0,n) on its own. And the memset code already handles a zero length just fine. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-01-19dmaengine: stm32-dmamux: Remove unnecessary platform_get_resource() error checkWei Yongjun
devm_ioremap_resource() already checks if the resource is NULL, so remove the unnecessary platform_get_resource() error check. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-18Merge branch 'pm-core'Rafael J. Wysocki
* pm-core: (29 commits) dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit PM / runtime: Allow no callbacks in pm_runtime_force_suspend|resume() PM / runtime: Check ignore_children in pm_runtime_need_not_resume() PM / runtime: Rework pm_runtime_force_suspend/resume() PM / wakeup: Print warn if device gets enabled as wakeup source during sleep PM / core: Propagate wakeup_path status flag in __device_suspend_late() PM / core: Re-structure code for clearing the direct_complete flag PM: i2c-designware-platdrv: Optimize power management PM: i2c-designware-platdrv: Use DPM_FLAG_SMART_PREPARE PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPEND PCI / PM: Use SMART_SUSPEND and LEAVE_SUSPENDED flags for PCIe ports PM / wakeup: Add device_set_wakeup_path() helper to control wakeup path PM / core: Assign the wakeup_path status flag in __device_prepare() PM / wakeup: Do not fail dev_pm_attach_wake_irq() unnecessarily PM / core: Direct DPM_FLAG_LEAVE_SUSPENDED handling PM / core: Direct DPM_FLAG_SMART_SUSPEND optimization PM / core: Add helpers for subsystem callback selection PM / wakeup: Drop redundant check from device_init_wakeup() PM / wakeup: Drop redundant check from device_set_wakeup_enable() PM / wakeup: only recommend "call"ing device_init_wakeup() once ...
2018-01-17dmaengine: rcar-dmac: Make DMAC reinit during system resume explicitGeert Uytterhoeven
The current (empty) system sleep callbacks rely on the PM core to force a runtime resume to reinitialize the DMAC registers during system resume. Without a reinitialization, e.g. SCIF DMA will hang silently after a system resume on R-Car Gen3. Make this explicit by using pm_runtime_force_{suspend,resume}() as the system sleep callbacks instead. Use SET_LATE_SYSTEM_SLEEP_PM_OPS() as DMA engines must be initialized before all DMA slave devices. Fixes: 17218e0092f8 "PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume()" Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-15dmaengine: sprd: statify 'sprd_dma_prep_dma_memcpy'Vinod Koul
Sparse warns that 'sprd_dma_prep_dma_memcpy' should be static so make it static. drivers/dma/sprd-dma.c:713:32: warning: symbol'sprd_dma_prep_dma_memcpy' was not declared. Should it be static? Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-08dmaengine: qcom_hidma: simplify DT resource parsingRob Herring
The hidma driver open codes populating address and IRQ resources from DT. We have standard functions of_address_to_resource and of_irq_to_resource for this, so use them instead. The DT binding states each child should have 2 addresses and 1 IRQ, so we can simplify the logic and do a fixed size resource allocation. Using the standard of_address_to_resource will also do any address translation which was missing. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-08dmaengine: xilinx_dma: Free BD consistent memoryKedareswara rao Appana
Free BD consistent memory while freeing the channel i.e in free_chan_resources. Signed-off-by: Radhey Shyam Pandey <radheys@xilinx.com> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-08dmaengine: xilinx_dma: Fix warning variable prev set but not usedKedareswara rao Appana
This patch fixes the below sparse warning in the driver drivers/dma/xilinx/xilinx_dma.c: In function ‘xilinx_vdma_dma_prep_interleaved’: drivers/dma/xilinx/xilinx_dma.c:1614:43: warning: variable ‘prev’ set but not used [-Wunused-but-set-variable] struct xilinx_vdma_tx_segment *segment, *prev = NULL; Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-08dmaengine: xilinx_dma: properly configure the SG mode bit in the driver for cdmaKedareswara rao Appana
If the hardware is configured for Scatter Gather(SG) mode, and hardware is idle, in the control register SG mode bit must be set to a 0 then back to 1 by the software, to force the CDMA SG engine to use a new value written to the CURDESC_PNTR register, failure to do so could result errors from the dmaengine. This patch updates the same. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-03Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Updates to use cond_resched() instead of cond_resched_rcu_qs() where feasible (currently everywhere except in kernel/rcu and in kernel/torture.c). Also a couple of fixes to avoid sending IPIs to offline CPUs. - Updates to simplify RCU's dyntick-idle handling. - Updates to remove almost all uses of smp_read_barrier_depends() and read_barrier_depends(). - Miscellaneous fixes. - Torture-test updates. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-22dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63Vignesh R
Register layout of a typical TPCC_EVT_MUX_M_N register is such that the lowest numbered event is at the lowest byte address and highest numbered event at highest byte address. But TPCC_EVT_MUX_60_63 register layout is different, in that the lowest numbered event is at the highest address and highest numbered event is at the lowest address. Therefore, modify ti_am335x_xbar_write() to handle TPCC_EVT_MUX_60_63 register accordingly. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-07-02 20:49:08 +0000