aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/dma
AgeCommit message (Collapse)Author
2021-12-22dmaengine: st_fdma: fix MODULE_ALIASAlyssa Ross
[ Upstream commit 822c9f2b833c53fc67e8adf6f63ecc3ea24d502c ] modprobe can't handle spaces in aliases. Fixes: 6b4cd727eaf1 ("dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support") Signed-off-by: Alyssa Ross <hi@alyssa.is> Link: https://lore.kernel.org/r/20211125154441.2626214-1-hi@alyssa.is Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26dmaengine: dmaengine_desc_callback_valid(): Check for `callback_result`Lars-Peter Clausen
[ Upstream commit e7e1e880b114ca640a2f280b0d5d38aed98f98c6 ] Before the `callback_result` callback was introduced drivers coded their invocation to the callback in a similar way to: if (cb->callback) { spin_unlock(&dma->lock); cb->callback(cb->callback_param); spin_lock(&dma->lock); } With the introduction of `callback_result` two helpers where introduced to transparently handle both types of callbacks. And drivers where updated to look like this: if (dmaengine_desc_callback_valid(cb)) { spin_unlock(&dma->lock); dmaengine_desc_callback_invoke(cb, ...); spin_lock(&dma->lock); } dmaengine_desc_callback_invoke() correctly handles both `callback_result` and `callback`. But we forgot to update the dmaengine_desc_callback_valid() function to check for `callback_result`. As a result DMA descriptors that use the `callback_result` rather than `callback` don't have their callback invoked by drivers that follow the pattern above. Fix this by checking for both `callback` and `callback_result` in dmaengine_desc_callback_valid(). Fixes: f067025bc676 ("dmaengine: add support to provide error result from a DMA transation") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20211023134101.28042-1-lars@metafoo.de Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26dmaengine: at_xdmac: fix AT_XDMAC_CC_PERID() macroClaudiu Beznea
[ Upstream commit 320c88a3104dc955f928a1eecebd551ff89530c0 ] AT_XDMAC_CC_PERID() should be used to setup bits 24..30 of XDMAC_CC register. Using it without parenthesis around 0x7f & (i) will lead to setting all the time zero for bits 24..30 of XDMAC_CC as the << operator has higher precedence over bitwise &. Thus, add paranthesis around 0x7f & (i). Fixes: 15a03850ab8f ("dmaengine: at_xdmac: fix macro typo") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211007111230.2331837-3-claudiu.beznea@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: xilinx_dma: Set DMA mask for coherent APIsRadhey Shyam Pandey
[ Upstream commit aac6c0f90799d66b8989be1e056408f33fd99fe6 ] The xilinx dma driver uses the consistent allocations, so for correct operation also set the DMA mask for coherent APIs. It fixes the below kernel crash with dmatest client when DMA IP is configured with 64-bit address width and linux is booted from high (>4GB) memory. Call trace: [ 489.531257] dma_alloc_from_pool+0x8c/0x1c0 [ 489.535431] dma_direct_alloc+0x284/0x330 [ 489.539432] dma_alloc_attrs+0x80/0xf0 [ 489.543174] dma_pool_alloc+0x160/0x2c0 [ 489.547003] xilinx_cdma_prep_memcpy+0xa4/0x180 [ 489.551524] dmatest_func+0x3cc/0x114c [ 489.555266] kthread+0x124/0x130 [ 489.558486] ret_from_fork+0x10/0x3c [ 489.562051] ---[ end trace 248625b2d596a90a ]--- Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Harini Katakam <harini.katakam@xilinx.com> Link: https://lore.kernel.org/r/1629363528-30347-1-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: ioat: depends on !UMLJohannes Berg
[ Upstream commit bbac7a92a46f0876e588722ebe552ddfe6fd790f ] Now that UML has PCI support, this driver must depend also on !UML since it pokes at X86_64 architecture internals that don't exist on ARCH=um. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20210809112409.a3a0974874d2.I2ffe3d11ed37f735da2f39884a74c953b258b995@changeid Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26dmaengine: acpi: Avoid comparison GSI with Linux vIRQAndy Shevchenko
commit 67db87dc8284070adb15b3c02c1c31d5cf51c5d6 upstream. Currently the CRST parsing relies on the fact that on most of x86 devices the IRQ mapping is 1:1 with Linux vIRQ. However, it may be not true for some. Fix this by converting GSI to Linux vIRQ before checking it. Fixes: ee8209fd026b ("dma: acpi-dma: parse CSRT to extract additional resources") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210730202715.24375-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not ↵Peter Ujfalusi
yet available [ Upstream commit eda97cb095f2958bbad55684a6ca3e7d7af0176a ] If the router_xlate can not find the controller in the available DMA devices then it should return with -EPORBE_DEFER in a same way as the of_dma_request_slave_channel() does. The issue can be reproduced if the event router is registered before the DMA controller itself and a driver would request for a channel before the controller is registered. In of_dma_request_slave_channel(): 1. of_dma_find_controller() would find the dma_router 2. ofdma->of_dma_xlate() would fail and returned NULL 3. -ENODEV is returned as error code with this patch we would return in this case the correct -EPROBE_DEFER and the client can try to request the channel later. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20210717190021.21897-1-peter.ujfalusi@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()Yu Kuai
[ Upstream commit 1da569fa7ec8cb0591c74aa3050d4ea1397778b4 ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by moving the error_pm label above the pm_runtime_put() in the error path. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20210706124521.1371901-1-yukuai3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-30dmaengine: pl330: fix wrong usage of spinlock flags in dma_cyclcBumyong Lee
commit 4ad5dd2d7876d79507a20f026507d1a93b8fff10 upstream. flags varible which is the input parameter of pl330_prep_dma_cyclic() should not be used by spinlock_irq[save/restore] function. Signed-off-by: Jongho Park <jongho7.park@samsung.com> Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20210507063647.111209-1-chanho61.park@samsung.com Fixes: f6f2421c0a1c ("dmaengine: pl330: Merge dma_pl330_dmac and pl330_dmac structs") Cc: stable@vger.kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-30dmaengine: stedma40: add missing iounmap() on error in d40_probe()Yang Yingliang
[ Upstream commit fffdaba402cea79b8d219355487d342ec23f91c6 ] Add the missing iounmap() before return from d40_probe() in the error handling case. Fixes: 8d318a50b3d7 ("DMAENGINE: Support for ST-Ericssons DMA40 block v3") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210518141108.1324127-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-30dmaengine: QCOM_HIDMA_MGMT depends on HAS_IOMEMRandy Dunlap
[ Upstream commit 0cfbb589d67f16fa55b26ae02b69c31b52e344b1 ] When CONFIG_HAS_IOMEM is not set/enabled, certain iomap() family functions [including ioremap(), devm_ioremap(), etc.] are not available. Drivers that use these functions should depend on HAS_IOMEM so that they do not cause build errors. Rectifies these build errors: s390-linux-ld: drivers/dma/qcom/hidma_mgmt.o: in function `hidma_mgmt_probe': hidma_mgmt.c:(.text+0x780): undefined reference to `devm_ioremap_resource' s390-linux-ld: drivers/dma/qcom/hidma_mgmt.o: in function `hidma_mgmt_init': hidma_mgmt.c:(.init.text+0x126): undefined reference to `of_address_to_resource' s390-linux-ld: hidma_mgmt.c:(.init.text+0x16e): undefined reference to `of_address_to_resource' Fixes: 67a2003e0607 ("dmaengine: add Qualcomm Technologies HIDMA channel driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Link: https://lore.kernel.org/r/20210522021313.16405-3-rdunlap@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-30dmaengine: ALTERA_MSGDMA depends on HAS_IOMEMRandy Dunlap
[ Upstream commit 253697b93c2a1c237d34d3ae326e394aeb0ca7b3 ] When CONFIG_HAS_IOMEM is not set/enabled, certain iomap() family functions [including ioremap(), devm_ioremap(), etc.] are not available. Drivers that use these functions should depend on HAS_IOMEM so that they do not cause build errors. Repairs this build error: s390-linux-ld: drivers/dma/altera-msgdma.o: in function `request_and_map': altera-msgdma.c:(.text+0x14b0): undefined reference to `devm_ioremap' Fixes: a85c6f1b2921 ("dmaengine: Add driver for Altera / Intel mSGDMA IP core") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Stefan Roese <sr@denx.de> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Reviewed-by: Stefan Roese <sr@denx.de> Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de Link: https://lore.kernel.org/r/20210522021313.16405-2-rdunlap@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-03dmaengine: qcom_hidma: comment platform_driver_register callPhillip Potter
[ Upstream commit 4df2a8b0ad634d98a67e540a4e18a60f943e7d9f ] Place a comment in hidma_mgmt_init explaining why success must currently be assumed, due to the cleanup issue that would need to be considered were this module ever to be unloadable or were this platform_driver_register call ever to fail. Acked-By: Vinod Koul <vkoul@kernel.org> Acked-By: Sinan Kaya <okaya@kernel.org> Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20210503115736.2104747-52-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-28dmaengine: dw: Make it dependent to HAS_IOMEMAndy Shevchenko
[ Upstream commit 88cd1d6191b13689094310c2405394e4ce36d061 ] Some architectures do not provide devm_*() APIs. Hence make the driver dependent on HAVE_IOMEM. Fixes: dbde5c2934d1 ("dw_dmac: use devm_* functions to simplify code") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20210324141757.24710-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-03dmaengine: hsu: disable spurious interruptFerry Toth
[ Upstream commit 035b73b2b3b2e074a56489a7bf84b6a8012c0e0d ] On Intel Tangier B0 and Anniedale the interrupt line, disregarding to have different numbers, is shared between HSU DMA and UART IPs. Thus on such SoCs we are expecting that IRQ handler is called in UART driver only. hsu_pci_irq was handling the spurious interrupt from HSU DMA by returning immediately. This wastes CPU time and since HSU DMA and HSU UART interrupt occur simultaneously they race to be handled causing delay to the HSU UART interrupt handling. Fix this by disabling the interrupt entirely. Fixes: 4831e0d9054c ("serial: 8250_mid: handle interrupt correctly in DMA case") Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210112223749.97036-1-ftoth@exalondelft.nl Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-03dmaengine: fsldma: Fix a resource leak in an error handling path of the ↵Christophe JAILLET
probe function [ Upstream commit b202d4e82531a62a33a6b14d321dd2aad491578e ] In case of error, the previous 'fsl_dma_chan_probe()' calls must be undone by some 'fsl_dma_chan_remove()', as already done in the remove function. It was added in the remove function in commit 77cd62e8082b ("fsldma: allow Freescale Elo DMA driver to be compiled as a module") Fixes: d3f620b2c4fe ("fsldma: simplify IRQ probing and handling") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201212160614.92576-1-christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-03dmaengine: fsldma: Fix a resource leak in the remove functionChristophe JAILLET
[ Upstream commit cbc0ad004c03ad7971726a5db3ec84dba3dcb857 ] A 'irq_dispose_mapping()' call is missing in the remove function. Add it. This is needed to undo the 'irq_of_parse_and_map() call from the probe function and already part of the error handling path of the probe function. It was added in the probe function only in commit d3f620b2c4fe ("fsldma: simplify IRQ probing and handling") Fixes: 77cd62e8082b ("fsldma: allow Freescale Elo DMA driver to be compiled as a module") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201212160516.92515-1-christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17dmaengine: xilinx_dma: fix mixed_enum_type coverity warningShravya Kumbham
commit 2d5efea64472469117dc1a9a39530069e95b21e9 upstream. Typecast the fls(width -1) with (enum dmaengine_alignment) in xilinx_dma_chan_probe function to fix the coverity warning. Addresses-Coverity: Event mixed_enum_type. Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support") Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1608722462-29519-4-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17dmaengine: xilinx_dma: check dma_async_device_register return valueShravya Kumbham
commit 99974aedbd73523969afb09f33c6e3047cd0ddae upstream. dma_async_device_register() can return non-zero error code. Add condition to check the return value of dma_async_device_register function and handle the error path. Addresses-Coverity: Event check_return. Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support") Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1608722462-29519-2-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-02dmaengine: pl330: _prep_dma_memcpy: Fix wrong burst sizeSugar Zhang
[ Upstream commit e773ca7da8beeca7f17fe4c9d1284a2b66839cc1 ] Actually, burst size is equal to '1 << desc->rqcfg.brst_size'. we should use burst size, not desc->rqcfg.brst_size. dma memcpy performance on Rockchip RV1126 @ 1512MHz A7, 1056MHz LPDDR3, 200MHz DMA: dmatest: /# echo dma0chan0 > /sys/module/dmatest/parameters/channel /# echo 4194304 > /sys/module/dmatest/parameters/test_buf_size /# echo 8 > /sys/module/dmatest/parameters/iterations /# echo y > /sys/module/dmatest/parameters/norandom /# echo y > /sys/module/dmatest/parameters/verbose /# echo 1 > /sys/module/dmatest/parameters/run dmatest: dma0chan0-copy0: result #1: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #2: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #3: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #4: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #5: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #6: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #7: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #8: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 Before: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 48 iops 200338 KB/s (0) After this patch: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 179 iops 734873 KB/s (0) After this patch and increase dma clk to 400MHz: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 259 iops 1062929 KB/s (0) Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1605326106-55681-1-git-send-email-sugar.zhang@rock-chips.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-02dmaengine: xilinx_dma: use readl_poll_timeout_atomic variantMarc Ferland
[ Upstream commit 0ba2df09f1500d3f27398a3382b86d39c3e6abe2 ] The xilinx_dma_poll_timeout macro is sometimes called while holding a spinlock (see xilinx_dma_issue_pending() for an example) this means we shouldn't sleep when polling the dma channel registers. To address it in xilinx poll timeout macro use readl_poll_timeout_atomic instead of readl_poll_timeout variant. Signed-off-by: Marc Ferland <ferlandm@amotus.ca> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1604473206-32573-2-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05dmaengine: dma-jz4780: Fix race in jz4780_dma_tx_statusPaul Cercueil
commit baf6fd97b16ea8f981b8a8b04039596f32fc2972 upstream. The jz4780_dma_tx_status() function would check if a channel's cookie state was set to 'completed', and if not, it would enter the critical section. However, in that time frame, the jz4780_dma_chan_irq() function was able to set the cookie to 'completed', and clear the jzchan->vchan pointer, which was deferenced in the critical section of the first function. Fix this race by checking the channel's cookie state after entering the critical function and not before. Fixes: d894fc6046fe ("dmaengine: jz4780: add driver for the Ingenic JZ4780 DMA controller") Cc: stable@vger.kernel.org # v4.0 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reported-by: Artur Rojek <contact@artur-rojek.eu> Tested-by: Artur Rojek <contact@artur-rojek.eu> Link: https://lore.kernel.org/r/20201004140307.885556-1-paul@crapouillou.net Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01dmaengine: tegra-apb: Prevent race conditions on channel's freeingDmitry Osipenko
[ Upstream commit 8e84172e372bdca20c305d92d51d33640d2da431 ] It's incorrect to check the channel's "busy" state without taking a lock. That shouldn't cause any real troubles, nevertheless it's always better not to have any race conditions in the code. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20200209163356.6439-5-digetx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01dmaengine: zynqmp_dma: fix burst length configurationMatthias Fend
[ Upstream commit cc88525ebffc757e00cc5a5d61da6271646c7f5f ] Since the dma engine expects the burst length register content as power of 2 value, the burst length needs to be converted first. Additionally add a burst length range check to avoid corrupting unrelated register bits. Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net> Link: https://lore.kernel.org/r/20200115102249.24398-1-matthias.fend@wolfvision.net Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23dmaengine: acpi: Put the CSRT table after using itHanjun Guo
[ Upstream commit 7eb48dd094de5fe0e216b550e73aa85257903973 ] The acpi_get_table() should be coupled with acpi_put_table() if the mapped table is not used at runtime to release the table mapping, put the CSRT table buf after using it. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1595411661-15936-1-git-send-email-guohanjun@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-09dmaengine: pl330: Fix burst length if burst size is smaller than bus widthMarek Szyprowski
[ Upstream commit 0661cef675d37e2c4b66a996389ebeae8568e49e ] Move the burst len fixup after setting the generic value for it. This finally enables the fixup introduced by commit 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width"), which otherwise was overwritten by the generic value. Reported-by: kernel test robot <lkp@intel.com> Fixes: 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200825064617.16193-1-m.szyprowski@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-09dmaengine: at_hdmac: check return value of of_find_device_by_node() in ↵Yu Kuai
at_dma_xlate() [ Upstream commit 0cef8e2c5a07d482ec907249dbd6687e8697677f ] The reurn value of of_find_device_by_node() is not checked, thus null pointer dereference will be triggered if of_find_device_by_node() failed. Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20200817115728.1706719-2-yukuai3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-09dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handlingPeter Ujfalusi
[ Upstream commit 5b2aa9f918f6837ae943557f8cec02c34fcf80e7 ] of_dma_xlate callback can return ERR_PTR as well NULL in case of failure. If error code is returned (not NULL) then the route should be released and the router should not be registered for the channel. Fixes: 56f13c0d9524c ("dmaengine: of_dma: Support for DMA routers") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200806104928.25975-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-29dmaengine: ioat setting ioat timeout as module parameterLeonid Ravich
[ Upstream commit 87730ccbddcb48478b1b88e88b14e73424130764 ] DMA transaction time to completion is a function of PCI bandwidth, transaction size and a queue depth. So hard coded value for timeouts might be wrong for some scenarios. Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20200701184816.29138-1-leonid.ravich@dell.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-29dmaengine: tegra210-adma: Fix runtime PM imbalance on errorDinghao Liu
[ Upstream commit 5b78fac4b1ba731cf4177fdbc1e3a4661521bcd0 ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20200624064626.19855-1-dinghao.liu@zju.edu.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22dmaengine: fsl-edma: Fix NULL pointer exception in fsl_edma_tx_handlerKrzysztof Kozlowski
commit f5e5677c420346b4e9788051c2e4d750996c428c upstream. NULL pointer exception happens occasionally on serial output initiated by login timeout. This was reproduced only if kernel was built with significant debugging options and EDMA driver is used with serial console. col-vf50 login: root Password: Login timed out after 60 seconds. Unable to handle kernel NULL pointer dereference at virtual address 00000044 Internal error: Oops: 5 [#1] ARM CPU: 0 PID: 157 Comm: login Not tainted 5.7.0-next-20200610-dirty #4 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (fsl_edma_tx_handler) from [<8016eb10>] (__handle_irq_event_percpu+0x64/0x304) (__handle_irq_event_percpu) from [<8016eddc>] (handle_irq_event_percpu+0x2c/0x7c) (handle_irq_event_percpu) from [<8016ee64>] (handle_irq_event+0x38/0x5c) (handle_irq_event) from [<801729e4>] (handle_fasteoi_irq+0xa4/0x160) (handle_fasteoi_irq) from [<8016ddcc>] (generic_handle_irq+0x34/0x44) (generic_handle_irq) from [<8016e40c>] (__handle_domain_irq+0x54/0xa8) (__handle_domain_irq) from [<80508bc8>] (gic_handle_irq+0x4c/0x80) (gic_handle_irq) from [<80100af0>] (__irq_svc+0x70/0x98) Exception stack(0x8459fe80 to 0x8459fec8) fe80: 72286b00 e3359f64 00000001 0000412d a0070013 85c98840 85c98840 a0070013 fea0: 8054e0d4 00000000 00000002 00000000 00000002 8459fed0 8081fbe8 8081fbec fec0: 60070013 ffffffff (__irq_svc) from [<8081fbec>] (_raw_spin_unlock_irqrestore+0x30/0x58) (_raw_spin_unlock_irqrestore) from [<8056cb48>] (uart_flush_buffer+0x88/0xf8) (uart_flush_buffer) from [<80554e60>] (tty_ldisc_hangup+0x38/0x1ac) (tty_ldisc_hangup) from [<8054c7f4>] (__tty_hangup+0x158/0x2bc) (__tty_hangup) from [<80557b90>] (disassociate_ctty.part.1+0x30/0x23c) (disassociate_ctty.part.1) from [<8011fc18>] (do_exit+0x580/0xba0) (do_exit) from [<801214f8>] (do_group_exit+0x3c/0xb4) (do_group_exit) from [<80121580>] (__wake_up_parent+0x0/0x14) Issue looks like race condition between interrupt handler fsl_edma_tx_handler() (called as result of fsl_edma_xfer_desc()) and terminating the transfer with fsl_edma_terminate_all(). The fsl_edma_tx_handler() handles interrupt for a transfer with already freed edesc and idle==true. Fixes: d6be34fbd39b ("dma: Add Freescale eDMA engine driver support") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Robin Gong <yibin.gong@nxp.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1591877861-28156-2-git-send-email-krzk@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27dmaengine: tegra210-adma: Fix an error handling path in 'tegra_adma_probe()'Christophe JAILLET
commit 3a5fd0dbd87853f8bd2ea275a5b3b41d6686e761 upstream. Commit b53611fb1ce9 ("dmaengine: tegra210-adma: Fix crash during probe") has moved some code in the probe function and reordered the error handling path accordingly. However, a goto has been missed. Fix it and goto the right label if 'dma_async_device_register()' fails, so that all resources are released. Fixes: b53611fb1ce9 ("dmaengine: tegra210-adma: Fix crash during probe") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200516214205.276266-1-christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20dmaengine: mmp_tdma: Reset channel error on releaseLubomir Rintel
[ Upstream commit 0c89446379218698189a47871336cb30286a7197 ] When a channel configuration fails, the status of the channel is set to DEV_ERROR so that an attempt to submit it fails. However, this status sticks until the heat end of the universe, making it impossible to recover from the error. Let's reset it when the channel is released so that further use of the channel with correct configuration is not impacted. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200419164912.670973-5-lkundrak@v3.sk Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20dmaengine: pch_dma.c: Avoid data race between probe and irq handlerMadhuparna Bhowmik
[ Upstream commit 2e45676a4d33af47259fa186ea039122ce263ba9 ] pd->dma.dev is read in irq handler pd_irq(). However, it is set to pdev->dev after request_irq(). Therefore, set pd->dma.dev to pdev->dev before request_irq() to avoid data race between pch_dma_probe() and pd_irq(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Link: https://lore.kernel.org/r/20200416062335.29223-1-madhuparnabhowmik10@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-05dmaengine: dmatest: Fix iteration non-stop logicAndy Shevchenko
commit b9f960201249f20deea586b4ec814669b4c6b1c0 upstream. Under some circumstances, i.e. when test is still running and about to time out and user runs, for example, grep -H . /sys/module/dmatest/parameters/* the iterations parameter is not respected and test is going on and on until user gives echo 0 > /sys/module/dmatest/parameters/run This is not what expected. The history of this bug is interesting. I though that the commit 2d88ce76eb98 ("dmatest: add a 'wait' parameter") is a culprit, but looking closer to the code I think it simple revealed the broken logic from the day one, i.e. in the commit 0a2ff57d6fba ("dmaengine: dmatest: add a maximum number of test iterations") which adds iterations parameter. So, to the point, the conditional of checking the thread to be stopped being first part of conjunction logic prevents to check iterations. Thus, we have to always check both conditions to be able to stop after given iterations. Since it wasn't visible before second commit appeared, I add a respective Fixes tag. Fixes: 2d88ce76eb98 ("dmatest: add a 'wait' parameter") Cc: Dan Williams <dan.j.williams@intel.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200424161147.16895-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11dmaengine: coh901318: Fix a double lock bug in dma_tc_handle()Dan Carpenter
commit 36d5d22090d13fd3a7a8c9663a711cbe6970aac8 upstream. The caller is already holding the lock so this will deadlock. Fixes: 0b58828c923e ("DMAENGINE: COH 901 318 remove irq counting") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200217144050.3i4ymbytogod4ijn@kili.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11dmaengine: tegra-apb: Prevent race conditions of tasklet vs free listDmitry Osipenko
commit c33ee1301c393a241d6424e36eff1071811b1064 upstream. The interrupt handler puts a half-completed DMA descriptor on a free list and then schedules tasklet to process bottom half of the descriptor that executes client's callback, this creates possibility to pick up the busy descriptor from the free list. Thus, let's disallow descriptor's re-use until it is fully processed. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200209163356.6439-3-digetx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11dmaengine: tegra-apb: Fix use-after-freeDmitry Osipenko
commit 94788af4ed039476ff3527b0e6a12c1dc42cb022 upstream. I was doing some experiments with I2C and noticed that Tegra APB DMA driver crashes sometime after I2C DMA transfer termination. The crash happens because tegra_dma_terminate_all() bails out immediately if pending list is empty, and thus, it doesn't release the half-completed descriptors which are getting re-used before ISR tasklet kicks-in. tegra-i2c 7000c400.i2c: DMA transfer timeout elants_i2c 0-0010: elants_i2c_irq: failed to read data: -110 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 142 at lib/list_debug.c:45 __list_del_entry_valid+0x45/0xac list_del corruption, ddbaac44->next is LIST_POISON1 (00000100) Modules linked in: CPU: 0 PID: 142 Comm: kworker/0:2 Not tainted 5.5.0-rc2-next-20191220-00175-gc3605715758d-dirty #538 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events_freezable_power_ thermal_zone_device_check [<c010e5c5>] (unwind_backtrace) from [<c010a1c5>] (show_stack+0x11/0x14) [<c010a1c5>] (show_stack) from [<c0973925>] (dump_stack+0x85/0x94) [<c0973925>] (dump_stack) from [<c011f529>] (__warn+0xc1/0xc4) [<c011f529>] (__warn) from [<c011f7e9>] (warn_slowpath_fmt+0x61/0x78) [<c011f7e9>] (warn_slowpath_fmt) from [<c042497d>] (__list_del_entry_valid+0x45/0xac) [<c042497d>] (__list_del_entry_valid) from [<c047a87f>] (tegra_dma_tasklet+0x5b/0x154) [<c047a87f>] (tegra_dma_tasklet) from [<c0124799>] (tasklet_action_common.constprop.0+0x41/0x7c) [<c0124799>] (tasklet_action_common.constprop.0) from [<c01022ab>] (__do_softirq+0xd3/0x2a8) [<c01022ab>] (__do_softirq) from [<c0124683>] (irq_exit+0x7b/0x98) [<c0124683>] (irq_exit) from [<c0168c19>] (__handle_domain_irq+0x45/0x80) [<c0168c19>] (__handle_domain_irq) from [<c043e429>] (gic_handle_irq+0x45/0x7c) [<c043e429>] (gic_handle_irq) from [<c0101aa5>] (__irq_svc+0x65/0x94) Exception stack(0xde2ebb90 to 0xde2ebbd8) Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200209163356.6439-2-digetx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28dmaengine: Store module owner in dma_device structLogan Gunthorpe
[ Upstream commit dae7a589c18a4d979d5f14b09374e871b995ceb1 ] dma_chan_to_owner() dereferences the driver from the struct device to obtain the owner and call module_[get|put](). However, if the backing device is unbound before the dma_device is unregistered, the driver will be cleared and this will cause a NULL pointer dereference. Instead, store a pointer to the owner module in the dma_device struct so the module reference can be properly put when the channel is put, even if the backing device was destroyed first. This change helps to support a safer unbind of DMA engines. If the dma_device is unregistered in the driver's remove function, there's no guarantee that there are no existing clients and a users action may trigger the WARN_ONCE in dma_async_device_unregister() which is unlikely to leave the system in a consistent state. Instead, a better approach is to allow the backing driver to go away and fail any subsequent requests to it. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20191216190120.21374-2-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27dmaengine: ti: edma: fix missed failure handlingChuhong Yuan
[ Upstream commit 340049d453682a9fe8d91fe794dd091730f4bb25 ] When devm_kcalloc fails, it forgets to call edma_free_slot. Replace direct return with failure handler to fix it. Fixes: 1be5336bc7ba ("dmaengine: edma: New device tree binding") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191118073802.28424-1-hslester96@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27dmaengine: imx-sdma: fix size check for sdma script_numberRobin Gong
[ Upstream commit bd73dfabdda280fc5f05bdec79b6721b4b2f035f ] Illegal memory will be touch if SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 (41) exceed the size of structure sdma_script_start_addrs(40), thus cause memory corrupt such as slob block header so that kernel trap into while() loop forever in slob_free(). Please refer to below code piece in imx-sdma.c: for (i = 0; i < sdma->script_number; i++) if (addr_arr[i] > 0) saddr_arr[i] = addr_arr[i]; /* memory corrupt here */ That issue was brought by commit a572460be9cf ("dmaengine: imx-sdma: Add support for version 3 firmware") because SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 (38->41 3 scripts added) not align with script number added in sdma_script_start_addrs(2 scripts). Fixes: a572460be9cf ("dmaengine: imx-sdma: Add support for version 3 firmware") Cc: stable@vger.kernel Link: https://www.spinics.net/lists/arm-kernel/msg754895.html Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reported-by: Jurgen Lambrecht <J.Lambrecht@TELEVIC.com> Link: https://lore.kernel.org/r/1569347584-3478-1-git-send-email-yibin.gong@nxp.com [vkoul: update the patch title] Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27dmaengine: dw: platform: Switch to acpi_dma_controller_register()Andy Shevchenko
[ Upstream commit e7b8514e4d68bec21fc6385fa0a66797ddc34ac9 ] There is a possibility to have registered ACPI DMA controller while it has been gone already. To avoid the potential crash, move to non-managed acpi_dma_controller_register(). Fixes: 42c91ee71d6d ("dw_dmac: add ACPI support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190820131546.75744-8-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"Andy Shevchenko
[ Upstream commit c24a5c735f87d0549060de31367c095e8810b895 ] The commit 080edf75d337 ("dmaengine: hsu: set HSU_CH_MTSR to memory width") has been mistakenly submitted. The further investigations show that the original code does better job since the memory side transfer size has never been configured by DMA users. As per latest revision of documentation: "Channel minimum transfer size (CHnMTSR)... For IOSF UART, maximum value that can be programmed is 64 and minimum value that can be programmed is 1." This reverts commit 080edf75d337d35faa6fc3df99342b10d2848d16. Fixes: 080edf75d337 ("dmaengine: hsu: set HSU_CH_MTSR to memory width") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27dmaengine: tegra210-adma: Fix crash during probeJon Hunter
[ Upstream commit b53611fb1ce9b1786bd18205473e0c1d6bfa8934 ] Commit f33e7bb3eb92 ("dmaengine: tegra210-adma: restore channel status") added support to save and restore the DMA channel registers when runtime suspending the ADMA. This change is causing the kernel to crash when probing the ADMA, if the device is probed deferred when looking up the channel interrupts. The crash occurs because not all of the channel base addresses have been setup at this point and in the clean-up path of the probe, pm_runtime_suspend() is called invoking its callback which expects all the channel base addresses to be initialised. Although this could be fixed by simply checking for a NULL address, on further review of the driver it seems more appropriate that we only call pm_runtime_get_sync() after all the channel interrupts and base addresses have been configured. Therefore, fix this crash by moving the calls to pm_runtime_enable(), pm_runtime_get_sync() and tegra_adma_init() after the DMA channels have been initialised. Fixes: f33e7bb3eb92 ("dmaengine: tegra210-adma: restore channel status") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27dmaengine: tegra210-adma: restore channel statusSameer Pujar
[ Upstream commit f33e7bb3eb922618612a90f0a828c790e8880773 ] Status of ADMA channel registers is not saved and restored during system suspend. During active playback if system enters suspend, this results in wrong state of channel registers during system resume and playback fails to resume properly. Fix this by saving following channel registers in runtime suspend and restore during runtime resume. * ADMA_CH_LOWER_SRC_ADDR * ADMA_CH_LOWER_TRG_ADDR * ADMA_CH_FIFO_CTRL * ADMA_CH_CONFIG * ADMA_CH_CTRL * ADMA_CH_CMD * ADMA_CH_TC Runtime PM calls will be inovked during system resume path if a playback or capture needs to be resumed. Hence above changes work fine for system suspend case. Fixes: f46b195799b5 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA") Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27dmaengine: axi-dmac: Don't check the number of frames for alignmentAlexandru Ardelean
[ Upstream commit 648865a79d8ee3d1aa64aab5eb2a9d12eeed14f9 ] In 2D transfers (for the AXI DMAC), the number of frames (numf) represents Y_LENGTH, and the length of a frame is X_LENGTH. 2D transfers are useful for video transfers where screen resolutions ( X * Y ) are typically aligned for X, but not for Y. There is no requirement for Y_LENGTH to be aligned to the bus-width (or anything), and this is also true for AXI DMAC. Checking the Y_LENGTH for alignment causes false errors when initiating DMA transfers. This change fixes this by checking only that the Y_LENGTH is non-zero. Fixes: 0e3b67b348b8 ("dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-27dmaengine: mv_xor: Use correct device for DMA APIRobin Murphy
[ Upstream commit 3e5daee5ecf314da33a890fabaa2404244cd2a36 ] Using dma_dev->dev for mappings before it's assigned with the correct device is unlikely to work as expected, and with future dma-direct changes, passing a NULL device may end up crashing entirely. I don't know enough about this hardware or the mv_xor_prep_dma_interrupt() operation to implement the appropriate error-handling logic that would have revealed those dma_map_single() calls failing on arm64 for as long as the driver has been enabled there, but moving the assignment earlier will at least make the current code operate as intended. Fixes: 22843545b200 ("dma: mv_xor: Add support for DMA_INTERRUPT") Reported-by: John David Anglin <dave.anglin@bell.net> Tested-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-17ioat: ioat_alloc_ring() failure handling.Alexander.Barabash@dell.com
[ Upstream commit b0b5ce1010ffc50015eaec72b0028aaae3f526bb ] If dma_alloc_coherent() returns NULL in ioat_alloc_ring(), ring allocation must not proceed. Until now, if the first call to dma_alloc_coherent() in ioat_alloc_ring() returned NULL, the processing could proceed, failing with NULL-pointer dereferencing further down the line. Signed-off-by: Alexander Barabash <alexander.barabash@dell.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/75e9c0e84c3345d693c606c64f8b9ab5@x13pwhopdag1307.AMER.DELL.COM Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-17dmaengine: k3dma: Avoid null pointer traversalJohn Stultz
[ Upstream commit 2f42e05b942fe2fbfb9bbc6e34e1dd8c3ce4f3a4 ] In some cases we seem to submit two transactions in a row, which causes us to lose track of the first. If we then cancel the request, we may still get an interrupt, which traverses a null ds_run value. So try to avoid starting a new transaction if the ds_run value is set. While this patch avoids the null pointer crash, I've had some reports of the k3dma driver still getting confused, which suggests the ds_run/ds_done value handling still isn't quite right. However, I've not run into an issue recently with it so I think this patch is worth pushing upstream to avoid the crash. Signed-off-by: John Stultz <john.stultz@linaro.org> [add ss tag] Link: https://lore.kernel.org/r/20191218190906.6641-1-john.stultz@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17dmaengine: dw-dmac: implement dma protection control settingChristian Lamparter
[ Upstream commit 7b0c03ecc42fb223baf015877fee9d517c2c8af1 ] This patch adds a new device-tree property that allows to specify the dma protection control bits for the all of the DMA controller's channel uniformly. Setting the "correct" bits can have a huge impact on the PPC460EX and APM82181 that use this DMA engine in combination with a DesignWare' SATA-II core (sata_dwc_460ex driver). In the OpenWrt Forum, the user takimata reported that: |It seems your patch unleashed the full power of the SATA port. |Where I was previously hitting a really hard limit at around |82 MB/s for reading and 27 MB/s for writing, I am now getting this: | |root@OpenWrt:/mnt# time dd if=/dev/zero of=tempfile bs=1M count=1024 |1024+0 records in |1024+0 records out |real 0m 13.65s |user 0m 0.01s |sys 0m 11.89s | |root@OpenWrt:/mnt# time dd if=tempfile of=/dev/null bs=1M count=1024 |1024+0 records in |1024+0 records out |real 0m 8.41s |user 0m 0.01s |sys 0m 4.70s | |This means: 121 MB/s reading and 75 MB/s writing! | |The drive is a WD Green WD10EARX taken from an older MBL Single. |I repeated the test a few times with even larger files to rule out |any caching, I'm still seeing the same great performance. OpenWrt is |now completely on par with the original MBL firmware's performance. Another user And.short reported: |I can report that your fix worked! Boots up fine with two |drives even with more partitions, and no more reboot on |concurrent disk access! A closer look into the sata_dwc_460ex code revealed that the driver did initally set the correct protection control bits. However, this feature was lost when the sata_dwc_460ex driver was converted to the generic DMA driver framework. BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/55 BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/50 Fixes: 8b3444852a2b ("sata_dwc_460ex: move to generic DMA driver") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-24 00:16:14 +0000