aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/devfreq
AgeCommit message (Collapse)Author
2024-05-02PM / devfreq: Fix buffer overflow in trans_stat_showChristian Marangi
commit 08e23d05fa6dc4fc13da0ccf09defdd4bbc92ff4 upstream. Fix buffer overflow in trans_stat_show(). Convert simple snprintf to the more secure scnprintf with size of PAGE_SIZE. Add condition checking if we are exceeding PAGE_SIZE and exit early from loop. Also add at the end a warning that we exceeded PAGE_SIZE and that stats is disabled. Return -EFBIG in the case where we don't have enough space to write the full transition table. Also document in the ABI that this function can return -EFBIG error. Link: https://lore.kernel.org/all/20231024183016.14648-2-ansuelsmth@gmail.com/ Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218041 Fixes: e552bbaf5b98 ("PM / devfreq: Add sysfs node for representing frequency transition information.") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23PM / devfreq: Synchronize devfreq_monitor_[start/stop]Mukesh Ojha
[ Upstream commit aed5ed595960c6d301dcd4ed31aeaa7a8054c0c6 ] There is a chance if a frequent switch of the governor done in a loop result in timer list corruption where timer cancel being done from two place one from cancel_delayed_work_sync() and followed by expire_timers() can be seen from the traces[1]. while true do echo "simple_ondemand" > /sys/class/devfreq/1d84000.ufshc/governor echo "performance" > /sys/class/devfreq/1d84000.ufshc/governor done It looks to be issue with devfreq driver where device_monitor_[start/stop] need to synchronized so that delayed work should get corrupted while it is either being queued or running or being cancelled. Let's use polling flag and devfreq lock to synchronize the queueing the timer instance twice and work data being corrupted. [1] ... .. <idle>-0 [003] 9436.209662: timer_cancel timer=0xffffff80444f0428 <idle>-0 [003] 9436.209664: timer_expire_entry timer=0xffffff80444f0428 now=0x10022da1c function=__typeid__ZTSFvP10timer_listE_global_addr baseclk=0x10022da1c <idle>-0 [003] 9436.209718: timer_expire_exit timer=0xffffff80444f0428 kworker/u16:6-14217 [003] 9436.209863: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2b now=0x10022da1c flags=182452227 vendor.xxxyyy.ha-1593 [004] 9436.209888: timer_cancel timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216390: timer_init timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216392: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2c now=0x10022da1d flags=186646532 vendor.xxxyyy.ha-1593 [005] 9436.220992: timer_cancel timer=0xffffff80444f0428 xxxyyyTraceManag-7795 [004] 9436.261641: timer_cancel timer=0xffffff80444f0428 [2] 9436.261653][ C4] Unable to handle kernel paging request at virtual address dead00000000012a [ 9436.261664][ C4] Mem abort info: [ 9436.261666][ C4] ESR = 0x96000044 [ 9436.261669][ C4] EC = 0x25: DABT (current EL), IL = 32 bits [ 9436.261671][ C4] SET = 0, FnV = 0 [ 9436.261673][ C4] EA = 0, S1PTW = 0 [ 9436.261675][ C4] Data abort info: [ 9436.261677][ C4] ISV = 0, ISS = 0x00000044 [ 9436.261680][ C4] CM = 0, WnR = 1 [ 9436.261682][ C4] [dead00000000012a] address between user and kernel address ranges [ 9436.261685][ C4] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 9436.261701][ C4] Skip md ftrace buffer dump for: 0x3a982d0 ... [ 9436.262138][ C4] CPU: 4 PID: 7795 Comm: TraceManag Tainted: G S W O 5.10.149-android12-9-o-g17f915d29d0c #1 [ 9436.262141][ C4] Hardware name: Qualcomm Technologies, Inc. (DT) [ 9436.262144][ C4] pstate: 22400085 (nzCv daIf +PAN -UAO +TCO BTYPE=--) [ 9436.262161][ C4] pc : expire_timers+0x9c/0x438 [ 9436.262164][ C4] lr : expire_timers+0x2a4/0x438 [ 9436.262168][ C4] sp : ffffffc010023dd0 [ 9436.262171][ C4] x29: ffffffc010023df0 x28: ffffffd0636fdc18 [ 9436.262178][ C4] x27: ffffffd063569dd0 x26: ffffffd063536008 [ 9436.262182][ C4] x25: 0000000000000001 x24: ffffff88f7c69280 [ 9436.262185][ C4] x23: 00000000000000e0 x22: dead000000000122 [ 9436.262188][ C4] x21: 000000010022da29 x20: ffffff8af72b4e80 [ 9436.262191][ C4] x19: ffffffc010023e50 x18: ffffffc010025038 [ 9436.262195][ C4] x17: 0000000000000240 x16: 0000000000000201 [ 9436.262199][ C4] x15: ffffffffffffffff x14: ffffff889f3c3100 [ 9436.262203][ C4] x13: ffffff889f3c3100 x12: 00000000049f56b8 [ 9436.262207][ C4] x11: 00000000049f56b8 x10: 00000000ffffffff [ 9436.262212][ C4] x9 : ffffffc010023e50 x8 : dead000000000122 [ 9436.262216][ C4] x7 : ffffffffffffffff x6 : ffffffc0100239d8 [ 9436.262220][ C4] x5 : 0000000000000000 x4 : 0000000000000101 [ 9436.262223][ C4] x3 : 0000000000000080 x2 : ffffff889edc155c [ 9436.262227][ C4] x1 : ffffff8001005200 x0 : ffffff80444f0428 [ 9436.262232][ C4] Call trace: [ 9436.262236][ C4] expire_timers+0x9c/0x438 [ 9436.262240][ C4] __run_timers+0x1f0/0x330 [ 9436.262245][ C4] run_timer_softirq+0x28/0x58 [ 9436.262255][ C4] efi_header_end+0x168/0x5ec [ 9436.262265][ C4] __irq_exit_rcu+0x108/0x124 [ 9436.262274][ C4] __handle_domain_irq+0x118/0x1e4 [ 9436.262282][ C4] gic_handle_irq.30369+0x6c/0x2bc [ 9436.262286][ C4] el0_irq_naked+0x60/0x6c Link: https://lore.kernel.org/all/1700860318-4025-1-git-send-email-quic_mojha@quicinc.com/ Reported-by: Joyyoung Huang <huangzaiyang@oppo.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20PM / devfreq: rockchip-dfi: Make pmu regmap mandatorySascha Hauer
[ Upstream commit 1e0731c05c985deb68a97fa44c1adcd3305dda90 ] As a matter of fact the regmap_pmu already is mandatory because it is used unconditionally in the driver. Bail out gracefully in probe() rather than crashing later. Link: https://lore.kernel.org/lkml/20230704093242.583575-2-s.hauer@pengutronix.de/ Fixes: b9d1262bca0af ("PM / devfreq: event: support rockchip dfi controller") Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-19PM / devfreq: Fix leak in devfreq_dev_release()Boris Brezillon
commit 5693d077595de721f9ddbf9d37f40e5409707dfe upstream. srcu_init_notifier_head() allocates resources that need to be released with a srcu_cleanup_notifier_head() call. Reported by kmemleak. Fixes: 0fe3a66410a3 ("PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-14PM/devfreq: governor: Add a private governor_data for governorKant Fan
commit 5fdded8448924e3631d466eea499b11606c43640 upstream. The member void *data in the structure devfreq can be overwrite by governor_userspace. For example: 1. The device driver assigned the devfreq governor to simple_ondemand by the function devfreq_add_device() and init the devfreq member void *data to a pointer of a static structure devfreq_simple_ondemand_data by the function devfreq_add_device(). 2. The user changed the devfreq governor to userspace by the command "echo userspace > /sys/class/devfreq/.../governor". 3. The governor userspace alloced a dynamic memory for the struct userspace_data and assigend the member void *data of devfreq to this memory by the function userspace_init(). 4. The user changed the devfreq governor back to simple_ondemand by the command "echo simple_ondemand > /sys/class/devfreq/.../governor". 5. The governor userspace exited and assigned the member void *data in the structure devfreq to NULL by the function userspace_exit(). 6. The governor simple_ondemand fetched the static information of devfreq_simple_ondemand_data in the function devfreq_simple_ondemand_func() but the member void *data of devfreq was assigned to NULL by the function userspace_exit(). 7. The information of upthreshold and downdifferential is lost and the governor simple_ondemand can't work correctly. The member void *data in the structure devfreq is designed for a static pointer used in a governor and inited by the function devfreq_add_device(). This patch add an element named governor_data in the devfreq structure which can be used by a governor(E.g userspace) who want to assign a private data to do some private things. Fixes: ce26c5bb9569 ("PM / devfreq: Add basic governors") Cc: stable@vger.kernel.org # 5.10+ Reviewed-by: Chanwoo Choi <cwchoi00@gmail.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kant Fan <kant@allwinnertech.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-07PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_eventsMiaoqian Lin
commit f44b799603a9b5d2e375b0b2d54dd0b791eddfc2 upstream. of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. This function only calls of_node_put() in normal path, missing it in error paths. Add missing of_node_put() to avoid refcount leak. Fixes: f262f28c1470 ("PM / devfreq: event: Add devfreq_event class") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09PM / devfreq: rk3399_dmc: Disable edev on remove()Brian Norris
[ Upstream commit 2fccf9e6050e0e3b8b4cd275d41daf7f7fa22804 ] Otherwise we hit an unablanced enable-count when unbinding the DFI device: [ 1279.659119] ------------[ cut here ]------------ [ 1279.659179] WARNING: CPU: 2 PID: 5638 at drivers/devfreq/devfreq-event.c:360 devfreq_event_remove_edev+0x84/0x8c ... [ 1279.659352] Hardware name: Google Kevin (DT) [ 1279.659363] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [ 1279.659371] pc : devfreq_event_remove_edev+0x84/0x8c [ 1279.659380] lr : devm_devfreq_event_release+0x1c/0x28 ... [ 1279.659571] Call trace: [ 1279.659582] devfreq_event_remove_edev+0x84/0x8c [ 1279.659590] devm_devfreq_event_release+0x1c/0x28 [ 1279.659602] release_nodes+0x1cc/0x244 [ 1279.659611] devres_release_all+0x44/0x60 [ 1279.659621] device_release_driver_internal+0x11c/0x1ac [ 1279.659629] device_driver_detach+0x20/0x2c [ 1279.659641] unbind_store+0x7c/0xb0 [ 1279.659650] drv_attr_store+0x2c/0x40 [ 1279.659663] sysfs_kf_write+0x44/0x58 [ 1279.659672] kernfs_fop_write_iter+0xf4/0x190 [ 1279.659684] vfs_write+0x2b0/0x2e4 [ 1279.659693] ksys_write+0x80/0xec [ 1279.659701] __arm64_sys_write+0x24/0x30 [ 1279.659714] el0_svc_common+0xf0/0x1d8 [ 1279.659724] do_el0_svc_compat+0x28/0x3c [ 1279.659738] el0_svc_compat+0x10/0x1c [ 1279.659746] el0_sync_compat_handler+0xa8/0xcc [ 1279.659758] el0_sync_compat+0x188/0x1c0 [ 1279.659768] ---[ end trace cec200e5094155b4 ]--- Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14PM / devfreq: Add missing error code in devfreq_add_device()YueHaibing
[ Upstream commit 18b380ed61f892ed06838d1f1a5124d966292ed3 ] Set err code in the error path before jumping to the end of the function. Fixes: 4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14PM / devfreq: Use more accurate returned new_freq as resume_freqDong Aisheng
[ Upstream commit 62453f1ba5d5def9d58e140a50f3f168f028da38 ] Use the more accurate returned new_freq as resume_freq. It's the same as how devfreq->previous_freq was updated. Fixes: 83f8ca45afbf0 ("PM / devfreq: add support for suspend/resume of a devfreq device") Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14PM / devfreq: Unlock mutex and free devfreq struct in error pathLukasz Luba
commit 8b50a7995770d41a2e8d9c422cd2882aca0dedd2 upstream. The devfreq->lock is held for time of setup. Release the lock in the error path, before jumping to the end of the function. Change the goto destination which frees the allocated memory. Cc: v5.9+ <stable@vger.kernel.org> # v5.9+ Fixes: 4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode") Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-29PM / devfreq: tegra30: Improve initial hardware resettingDmitry Osipenko
It's safe to enable the ACTMON clock at any time during driver probing, even if we don't know the state of hardware, because it's used only for collecting and processing stats, and interrupt is kept disabled. This allows us to slightly improve code which performs initial hardware resetting by making use of a single reset_control_reset() instead of assert/deassert pair. Secondly, a potential error of the reset-control API is handled nicely now. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-29PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle ↵Chanwoo Choi
function Previously, devfreq core support 'devfreq-events' property in order to get the devfreq-event device by phandle. But, 'devfreq-events' property name is not proper on devicetree binding because this name doesn't mean the any h/w attribute. The devfreq-event core hand over the rights to decide the property name for getting the devfreq-event device on devicetree. Each devfreq-event driver will decide the property name on devicetree binding and then pass the their own property name to devfreq_event_get_edev_by_phandle function. And change the prototype of devfreq_event_get_edev_count function because of used deprecated 'devfreq-events' property. Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-29PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle functionChanwoo Choi
Previously, devfreq core support 'devfreq' property in order to get the devfreq device by phandle. But, 'devfreq' property name is not proper on devicetree binding because this name doesn't mean the any h/w attribute. The devfreq core hand over the right to decide the property name for getting the devfreq device on devicetree. Each devfreq driver will decide the property name on devicetree binding and pass the their own property name to devfreq_get_devfreq_by_phandle function. Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-29PM / devfreq: Add devfreq_get_devfreq_by_node functionLeonard Crestez
Split off part of devfreq_get_devfreq_by_phandle into a separate function. This allows callers to fetch devfreq instances by enumerating devicetree instead of explicit phandles. Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> [cw00.choi: Export devfreq_get_devfreq_by_node function and add function to devfreq.h when CONFIG_PM_DEVFREQ is enabled.] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-23PM / devfreq: tegra30: Disable clock on error in probeDan Carpenter
This error path needs to call clk_disable_unprepare(). Fixes: 7296443b900e ("PM / devfreq: tegra30: Handle possible round-rate error") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-09-23PM / devfreq: Add timer type to devfreq_summary debugfsChanwoo Choi
The commit 4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode") supports the delayed timer but this commit missed the adding the timer type to devfreq_summary debugfs node. Add the timer type to devfreq_summary debugfs. Fixes: 4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: Fix the wrong end with semicolonChanwoo Choi
Fix the wrong grammar at the end of code line by using semicolon. Cc: stable vger.kernel.org Fixes: 490a421bc575 ("PM / devfreq: Add debugfs support with devfreq_summary file") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: Fix indentaion of devfreq_summary debugfs nodeChanwoo Choi
The commit 66d0e797bf09 ("Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"") roll back the device name from 'devfreqX' to device name explained in DT. After applied commit 66d0e797bf09, the indentation of devfreq_summary debugfs node was broken. So, fix indentaion of devfreq_summary debugfs node as following: For example on Exynos5422-based Odroid-XU3 board, $ cat /sys/kernel/debug/devfreq/devfreq_summary dev parent_dev governor polling_ms cur_freq_Hz min_freq_Hz max_freq_Hz ------------------------------ ------------------------------ --------------- ---------- ------------ ------------ ------------ 10c20000.memory-controller null simple_ondemand 0 413000000 165000000 825000000 soc:bus_wcore null simple_ondemand 50 88700000 88700000 532000000 soc:bus_noc soc:bus_wcore passive 0 66600000 66600000 111000000 soc:bus_fsys_apb soc:bus_wcore passive 0 111000000 111000000 222000000 soc:bus_fsys soc:bus_wcore passive 0 75000000 75000000 200000000 soc:bus_fsys2 soc:bus_wcore passive 0 75000000 75000000 200000000 soc:bus_mfc soc:bus_wcore passive 0 83250000 83250000 333000000 soc:bus_gen soc:bus_wcore passive 0 88700000 88700000 266000000 soc:bus_peri soc:bus_wcore passive 0 66600000 66600000 66600000 soc:bus_g2d soc:bus_wcore passive 0 83250000 83250000 333000000 soc:bus_g2d_acp soc:bus_wcore passive 0 0 66500000 266000000 soc:bus_jpeg soc:bus_wcore passive 0 0 75000000 300000000 soc:bus_jpeg_apb soc:bus_wcore passive 0 0 83250000 166500000 soc:bus_disp1_fimd soc:bus_wcore passive 0 0 120000000 200000000 soc:bus_disp1 soc:bus_wcore passive 0 0 120000000 300000000 soc:bus_gscl_scaler soc:bus_wcore passive 0 0 150000000 300000000 soc:bus_mscl soc:bus_wcore passive 0 0 84000000 666000000 Cc: stable@vger.kernel.org Fixes: 66d0e797bf09 ("Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: Clean up the devfreq instance name in sysfs attrChanwoo Choi
The sysfs attr interface used eithere 'df' or 'devfreq' for devfreq instance name. In order to keep the consistency and to improve the readabilty, unify the instance name as 'df'. Add add the missing conditional statement to prevent the fault. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: Add support delayed timer for polling modeChanwoo Choi
Until now, the devfreq driver using polling mode like simple_ondemand governor have used only deferrable timer for reducing the redundant power consumption. It reduces the CPU wake-up from idle due to polling mode which check the status of Non-CPU device. But, it has a problem for Non-CPU device like DMC device with DMA operation. Some Non-CPU device need to do monitor continuously regardless of CPU state in order to decide the proper next status of Non-CPU device. So, add support the delayed timer for polling mode to support the repetitive monitoring. The devfreq driver and user can select the kind of timer on either deferrable and delayed timer. For example, change the timer type of DMC device based on Exynos5422-based Odroid-XU3 as following: - If want to use deferrable timer as following: echo deferrable > /sys/class/devfreq/10c20000.memory-controller/timer - If want to use delayed timer as following: echo delayed > /sys/class/devfreq/10c20000.memory-controller/timer Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: event: Fix trivial spellingKieran Bingham
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptors -> descriptors Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absentMarc Zyngier
Booting a recent kernel on a rk3399-based system (nanopc-t4), equipped with a recent u-boot and ATF results in an Oops due to a NULL pointer dereference. This turns out to be due to the rk3399-dmc driver looking for an *undocumented* property (rockchip,pmu), and happily using a NULL pointer when the property isn't there. Instead, make most of what was brought in with 9173c5ceb035 ("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.") conditioned on finding this property in the device-tree, preventing the driver from exploding. Cc: stable@vger.kernel.org Fixes: 9173c5ceb035 ("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-28PM / devfreq: Use lockdep asserts instead of manual checks for locked mutexKrzysztof Kozlowski
Instead of warning when mutex_is_locked(), just use the lockdep framework. The code is smaller and checks could be disabled for production environments (it is useful only during development). Put asserts at beginning of function, even before validating arguments. The behavior of update_devfreq() is now changed because lockdep assert will only print a warning, not return with EINVAL. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-28PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERRGustavo A. R. Silva
Fix inconsistent IS_ERR and PTR_ERR in imx_bus_init_icc(). The proper pointer to be passed as argument to PTR_ERR() is priv->icc_pdev. This bug was detected with the help of Coccinelle. Fixes: 16c1d2f1b0bd ("PM / devfreq: imx: Register interconnect device") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> [cw00.choi: Edit the patch title from 'imx' to 'imx-bus'] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-28PM / devfreq: Replace strncpy with strscpyDmitry Osipenko
GCC produces this warning when kernel compiled using `make W=1`: warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation] 772 | strncpy(devfreq->governor_name, governor_name, DEVFREQ_NAME_LEN); The strncpy doesn't take care of NULL-termination of the destination buffer, while the strscpy does. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-28PM / devfreq: imx: Register interconnect deviceLeonard Crestez
There is no single device which can represent the imx interconnect. Instead of adding a virtual one just make the main &noc act as the global interconnect provider. The imx interconnect provider driver will scale the NOC and DDRC based on bandwidth request. More scalable nodes can be added in the future, for example for audio/display/vpu/gpu NICs. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-28PM / devfreq: Add generic imx bus scaling driverLeonard Crestez
Add initial support for dynamic frequency switching on pieces of the imx interconnect fabric. All this driver does is set a clk rate based on an opp table, it does not map register areas. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-28PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()Markus Elfring
The function “platform_get_irq” can log an error already. Thus omit a redundant message for the exception handling in the calling function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-05-28PM / devfreq: tegra30: Make CPUFreq notifier to take into account boostingDmitry Osipenko
We're taking into account both HW memory-accesses + CPU activity based on current CPU's frequency. For memory-accesses there is a kind of hysteresis in a form of "boosting" which is managed by the tegra30-devfreq driver. If current HW memory activity is higher than activity judged based of the CPU's frequency, then there is no need to schedule cpufreq_update_work because the result of the work will be a NO-OP. And thus, tegra_actmon_cpufreq_contribution() should return 0, meaning that at the moment CPU frequency doesn't contribute anything to the final decision about required memory clock rate. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25PM / devfreq: Fix handling dev_pm_qos_remove_request resultLeonard Crestez
The dev_pm_qos_remove_request function can return 1 if "aggregated constraint value has changed" so only negative values should be reported as errors. Fixes: 27dbc542f651 ("PM / devfreq: Use PM QoS for sysfs min/max_freq") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25PM / devfreq: Fix a typo in a commentChristophe JAILLET
'govenror' was used in place of 'governor' Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event nameChanwoo Choi
DEVFREQ_GOV_INTERVAL event indicates that update the interval for polling mode of devfreq device. But, this event name doesn't specify exactly what to do. Change DEVFREQ_GOV_INTERVAL event name to DEVFREQ_GOV_UPDATE_INTERVAL which specifies what to do by event name. And modify the function name to DEVFREQ_GOV_UPDATE_INTERVAL with 'devfreq_' prefix + verb + object as following: - devfreq_interval_update -> devfreq_updatee_interval Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25PM / devfreq: Remove unneeded extern keywordChanwoo Choi
Remove unneeded extern keyword from devfreq-related header file and adjust the indentation of function parameter to keep the consistency in header file Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25PM / devfreq: Use constant name of userspace governorpierre Kuo
Based on commit aa7c352f9841 ("PM / devfreq: Define the constant governor name"), use constant name for userspace governor. Signed-off-by: pierre Kuo <vichy.kuo@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-02-24Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"Orson Zhai
This reverts commit 4585fbcb5331fc910b7e553ad3efd0dd7b320d14. The name changing as devfreq(X) breaks some user space applications, such as Android HAL from Unisoc and Hikey [1]. The device name will be changed unexpectly after every boot depending on module init sequence. It will make trouble to setup some system configuration like selinux for Android. So we'd like to revert it back to old naming rule before any better way being found. [1] https://lkml.org/lkml/2018/5/8/1042 Cc: John Stultz <john.stultz@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by: Orson Zhai <orson.unisoc@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-01-16PM / devfreq: Add debugfs support with devfreq_summary fileChanwoo Choi
Add debugfs interface to provide debugging information of devfreq device. It contains 'devfreq_summary' entry to show the summary of registered devfreq devices as following and the additional debugfs file will be added. - /sys/kernel/debug/devfreq/devfreq_summary [Detailed description of each field of 'devfreq_summary' debugfs file] - dev_name : Device name of h/w - dev : Device name made by devfreq core - parent_dev : If devfreq device uses the passive governor, show parent devfreq device name. Otherwise, show 'null'. - governor : Devfreq governor name - polling_ms : If devfreq device uses the simple_ondemand governor, polling_ms is necessary for the period. (unit: millisecond) - cur_freq_Hz : Current frequency (unit: Hz) - min_freq_Hz : Minimum frequency (unit: Hz) - max_freq_Hz : Maximum frequency (unit: Hz) [For example on Exynos5422-based Odroid-XU3 board] $ cat /sys/kernel/debug/devfreq/devfreq_summary dev_name dev parent_dev governor polling_ms cur_freq_Hz min_freq_Hz max_freq_Hz ------------------------------ ---------- ---------- --------------- ---------- ------------ ------------ ------------ 10c20000.memory-controller devfreq0 null simple_ondemand 0 165000000 165000000 825000000 soc:bus_wcore devfreq1 null simple_ondemand 50 532000000 88700000 532000000 soc:bus_noc devfreq2 devfreq1 passive 0 111000000 66600000 111000000 soc:bus_fsys_apb devfreq3 devfreq1 passive 0 222000000 111000000 222000000 soc:bus_fsys devfreq4 devfreq1 passive 0 200000000 75000000 200000000 soc:bus_fsys2 devfreq5 devfreq1 passive 0 200000000 75000000 200000000 soc:bus_mfc devfreq6 devfreq1 passive 0 333000000 83250000 333000000 soc:bus_gen devfreq7 devfreq1 passive 0 266000000 88700000 266000000 soc:bus_peri devfreq8 devfreq1 passive 0 66600000 66600000 66600000 soc:bus_g2d devfreq9 devfreq1 passive 0 333000000 83250000 333000000 soc:bus_g2d_acp devfreq10 devfreq1 passive 0 266000000 66500000 266000000 soc:bus_jpeg devfreq11 devfreq1 passive 0 300000000 75000000 300000000 soc:bus_jpeg_apb devfreq12 devfreq1 passive 0 166500000 83250000 166500000 soc:bus_disp1_fimd devfreq13 devfreq1 passive 0 200000000 120000000 200000000 soc:bus_disp1 devfreq14 devfreq1 passive 0 300000000 120000000 300000000 soc:bus_gscl_scaler devfreq15 devfreq1 passive 0 300000000 150000000 300000000 soc:bus_mscl devfreq16 devfreq1 passive 0 666000000 84000000 666000000 [lkp: Reported the build error] Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-01-06PM / devfreq: exynos: Rename Exynos to lowercaseKrzysztof Kozlowski
Fix up inconsistent usage of upper and lowercase letters in "Exynos" name. "EXYNOS" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-31PM / devfreq: imx8m-ddrc: Fix inconsistent IS_ERR and PTR_ERRYueHaibing
Fix inconsistent IS_ERR and PTR_ERR in imx8m_ddrc_probe(). Detected using Coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-bus: Add error log when fail to get devfreq-eventYangtao Li
Adding an error log makes it easier to trace the function's error path. Because the error code may be rewritten on return, print error code here. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-bus: Disable devfreq-event device when failsYangtao Li
The exynos_bus_profile_init process may fail, but the devfreq event device remains enabled. Call devfreq_event_disable_edev on the error return path. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: rk3399_dmc: Disable devfreq-event device when failsYangtao Li
The probe process may fail, but the devfreq event device remains enabled. Call devfreq_event_disable_edev on the error return path. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: imx8m-ddrc: Remove unused definesLeonard Crestez
The IMX_SIP_DDR_DVFS_WAIT_CHANGE and IMX_SIP_DDR_FREQ_SET_HIGH defines are not used so they can be removed. Fixes: 518e99e2a22e ("PM / devfreq: Add dynamic scaling for imx8m ddr controller") Reported-by: Shawn Guo <shawn.guo@kernel.org> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-bus: Reduce goto statements and remove unused headersArtur Świgoń
Improve code readability by changing the goto statements as well as eliminating a few more goto statements (related to return paths). Moreover, remove unused header file and adds a missing <linux/of.h>. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> [cw00.choi: Edit patch title and description] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependencyChanwoo Choi
To build test, add COMPILE_TEST depedency to both ARM_RK3399_DMC_DEVFREQ and DEVFREQ_EVENT_ROCKCHIP_DFI configuration. And ARM_RK3399_DMC_DEVFREQ used the SMCCC interface so that add HAVE_ARM_SMCCC dependency to prevent the build break. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: rockchip-dfi: Convert to devm_platform_ioremap_resourceYangtao Li
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: rk3399_dmc: Add missing of_node_put()Yangtao Li
of_node_put() needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: rockchip-dfi: Add missing of_node_put()Yangtao Li
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Fix multiple kernel-doc warningsRandy Dunlap
Fix kernel-doc warnings in devfreq files. Also fix a typo. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-bus: Extract exynos_bus_profile_init_passive()Artur Świgoń
This patch adds a new exynos_bus_profile_init_passive() extracted from exynos_bus_probe() for devfreq device using passive governor. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> [cw00.choi: Edit description to indicate that function is for devfreq device using passive governor] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-bus: Extract exynos_bus_profile_init()Artur Świgoń
This patch adds a new exynos_bus_profile_init() extracted from exynos_bus_probe() for devfreq device using simple_ondemand governor like parent devfreq device. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> [cw00.choi: Edit description to indicate that new function is for parent devfreq device] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-26 17:01:09 +0000