summaryrefslogtreecommitdiffstats
path: root/drivers/crypto/omap-aes.c
AgeCommit message (Collapse)Author
2013-03-10crypto: omap-aes - Use module_platform_driver macroSachin Kamat
module_platform_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-03-10crypto: omap-aes - Use pm_runtime_put instead of pm_runtime_put_sync in taskletJoel A Fernandes
After DMA is complete, the omap_aes_finish_req function is called as a part of the done_task tasklet. During this its atomic and any calls to pm functions should not assume they wont sleep. The patch replaces a call to pm_runtime_put_sync (which can sleep) with pm_runtime_put thus fixing a kernel panic observed on AM33xx SoC during AES operation. Tested on an AM33xx SoC device (beaglebone board). To reproduce the problem, I used the tcrypt kernel module as: modprobe tcrypt sec=2 mode=500 Signed-off-by: Joel A Fernandes <joelagnel@ti.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-20crypto: omap-aes - Add CTR algorithm SupportMark A. Greer
The OMAP3 and OMAP4/AM33xx versions of the AES crypto module support the CTR algorithm in addition to ECB and CBC that the OMAP2 version of the module supports. So, OMAP2 and OMAP3 share a common register set but OMAP3 supports CTR while OMAP2 doesn't. OMAP4/AM33XX uses a different register set from OMAP2/OMAP3 and also supports CTR. To add this support, use the platform_data introduced in an ealier commit to hold the list of algorithms supported by the current module. The probe routine will use that list to register the correct algorithms. Note: The code being integrated is from the TI AM33xx SDK and was written by Greg Turner <gkmturner@gmail.com> and Herman Schuurman (current email unknown) while at TI. CC: Greg Turner <gkmturner@gmail.com> CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-20crypto: omap-aes - Add OMAP4/AM33XX AES SupportMark A. Greer
Add support for the OMAP4 version of the AES module that is present on OMAP4 and AM33xx SoCs. The modules have several differences including register offsets and how DMA is triggered. To handle these differences, a platform_data structure is defined and contains routine pointers, register offsets, and bit offsets within registers. OMAP2/OMAP3-specific routines are suffixed with '_omap2' and OMAP4/AM33xx routines are suffixed with '_omap4'. Note: The code being integrated is from the TI AM33xx SDK and was written by Greg Turner <gkmturner@gmail.com> and Herman Schuurman (current email unknown) while at TI. CC: Greg Turner <gkmturner@gmail.com> CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-20crypto: omap-aes - Convert to dma_request_slave_channel_compat()Mark A. Greer
Use the dma_request_slave_channel_compat() call instead of the dma_request_channel() call to request a DMA channel. This allows the omap-aes driver use different DMA engines. CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-20crypto: omap-aes - Add Device Tree SupportMark A. Greer
Add Device Tree suport to the omap-aes crypto driver. Currently, only support for OMAP2 and OMAP3 is being added but support for OMAP4 will be added in a subsequent patch. CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-20crypto: omap-aes - Remove usage of private DMA APIMark A. Greer
Remove usage of the private OMAP DMA API. The dmaengine API will be used instead. CC: Russell King <rmk+kernel@arm.linux.org.uk> CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-20crypto: omap-aes - Add code to use dmaengine APIMark A. Greer
Add code to use the new dmaengine API alongside the existing DMA code that uses the private OMAP DMA API. The API to use is chosen by defining or undefining 'OMAP_AES_DMA_PRIVATE'. CC: Russell King <rmk+kernel@arm.linux.org.uk> CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-20crypto: omap-aes - Add suspend/resume supportMark A. Greer
Add suspend/resume support to the OMAP AES driver. CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-20crypto: omap-aes - Convert to use pm_runtime APIMark A. Greer
Convert the omap-aes crypto driver to use the pm_runtime API instead of the clk API. CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-20crypto: omap-aes - Don't reset controller for every operationMark A. Greer
The AES controller only needs to be reset once and that will be done by the hwmod infrastructure, if possible. Therefore, remove the reset code from the omap-aes driver. CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-20crypto: omap-aes - Remmove unnecessary pr_info noiseMark A. Greer
Remove the unnecessary pr_info() calls from omap_aes_probe() and omap_aes_mod_init(). CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-11-30ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.hTony Lindgren
Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the <plat-omap/dma-omap.h> path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King <linux@arm.linux.org.uk> cc: Kevin Hilman <khilman@ti.com> cc: "Benoît Cousson" <b-cousson@ti.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Vinod Koul <vinod.koul@intel.com> cc: Dan Williams <djbw@fb.com> cc: Mauro Carvalho Chehab <mchehab@infradead.org> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> cc: David Woodhouse <dwmw2@infradead.org> cc: Kyungmin Park <kyungmin.park@samsung.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tomi Valkeinen <tomi.valkeinen@ti.com> cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> cc: Hans Verkuil <hans.verkuil@cisco.com> cc: Vaibhav Hiremath <hvaibhav@ti.com> cc: Lokesh Vutla <lokeshvutla@ti.com> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> cc: Afzal Mohammed <afzal@ti.com> cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17Merge branch 'omap-for-v3.8/cleanup-headers-dma' into ↵Tony Lindgren
omap-for-v3.8/cleanup-headers Conflicts: drivers/crypto/omap-aes.c drivers/crypto/omap-sham.c drivers/dma/omap-dma.c
2012-10-15ARM: OMAP: Trivial driver changes to remove include plat/cpu.hTony Lindgren
Drivers should not use cpu_is_omap or cpu_class_is_omap macros, they should be private to the platform init code. And we'll be removing plat/cpu.h and only have a private soc.h for the arch/arm/*omap* code. This patch is intended as preparation for the core omap changes and removes the need to include plat/cpu.h from several drivers. This is needed for the ARM common zImage support. These changes are OK to do because: - omap-rng.c does not need plat/cpu.h - omap-aes.c and omap-sham.c get the proper platform_data passed to them so they don't need extra checks in the driver - omap-dma.c and omap-pcm.c can test the arch locally as omap1 and omap2 cannot be compiled together because of conflicting compiler flags Cc: Deepak Saxena <dsaxena@plexity.net> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Venkatraman S <svenkatr@ti.com> Cc: Chris Ball <cjb@laptop.org> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: linux-crypto@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org [tony@atomide.com: mmc changes folded in to an earlier patch] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-15ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.hLokesh Vutla
Move plat/dma.h to plat-omap/dma-omap.h as part of single zImage work Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-01crypto: drivers - remove cra_list initializationJussi Kivilinna
Initialization of cra_list is currently mixed, most ciphers initialize this field and most shashes do not. Initialization however is not needed at all since cra_list is initialized/overwritten in __crypto_register_alg() with list_add(). Therefore perform cleanup to remove all unneeded initializations of this field in 'crypto/drivers/'. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linux-geode@lists.infradead.org Cc: Michal Ludvig <michal@logix.cz> Cc: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Cc: Varun Wadekar <vwadekar@nvidia.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Kent Yoder <key@linux.vnet.ibm.com> Acked-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-01-13crypto: Add CRYPTO_ALG_KERN_DRIVER_ONLY flagNikos Mavrogiannopoulos
The added CRYPTO_ALG_KERN_DRIVER_ONLY indicates whether a cipher is only available via a kernel driver. If the cipher implementation might be available by using an instruction set or by porting the kernel code, then it must not be set. Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-01-29crypto: omap-aes - don't treat NULL clk as an errorJamie Iles
clk_get() returns a struct clk cookie to the driver and some platforms may return NULL if they only support a single clock. clk_get() has only failed if it returns a ERR_PTR() encoded pointer. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Reviewed-and-tested-by: Tobias Karnat <tobias.karnat@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-12-02crypto: omap-aes - checkpatch --file warning fixesDmitry Kasatkin
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-12-02crypto: omap-aes - initialize aes module once per requestDmitry Kasatkin
AES module was initialized for every DMA transaction. That is redundant. Now it is initialized once per request. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-12-02crypto: omap-aes - unnecessary code removedDmitry Kasatkin
Key and IV should always be set before AES operation. So no need to check if it has changed or not. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-12-02crypto: omap-aes - error handling implementation improvedDmitry Kasatkin
Previous version had not error handling. Request could remain uncompleted. Also in the case of DMA error, FLAGS_INIT is unset and accelerator will be initialized again. Buffer size allignment is checked. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-12-02crypto: omap-aes - redundant locking is removedDmitry Kasatkin
Submitting request involved double locking for enqueuing and dequeuing. Now it is done under the same lock. FLAGS_BUSY is now handled under the same lock. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-12-02crypto: omap-aes - DMA initialization fixes for OMAP off modeDmitry Kasatkin
DMA parameters for constant data were initialized during driver probe(). It seems that those settings sometimes are lost when devices goes to off mode. This patch makes DMA initialization just before use. It solves off mode problems. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-09-03crypto: omap-aes - OMAP2/3 AES hw accelerator driverDmitry Kasatkin
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>