| Age | Commit message (Collapse) | Author |
|---|
|
|
|
[ Upstream commit 4e7c4d3652f96f41179aab3ff53025c7a550d689 ]
GDSCs have multiple transition delays which are used for the GDSC FSM
states. Older targets/designs required these values to be updated from
gdsc code to certain default values for the FSM state to work as
expected. But on the newer targets/designs the values updated from the
GDSC driver can hamper the FSM state to not work as expected.
On SC7180 we observe black screens because the gdsc is being
enabled/disabled very rapidly and the GDSC FSM state does not work as
expected. This is due to the fact that the GDSC reset value is being
updated from SW.
Thus add support to update the transition delay from the clock
controller gdscs as required.
Fixes: 45dd0e55317cc ("clk: qcom: Add support for GDSCs)
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/20220223185606.3941-1-tdas@codeaurora.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
commit 2f0754f27a230fee6e6d753f07585cee03bedfe3 upstream.
The mmc0 clock gate bit was mistakenly assigned to "i2s" clock.
You can find that the same bit is assigned to "mmc0" too.
It leads to mmc0 hang for a long time after any sound activity
also it prevented PM_SLEEP to work properly.
I guess it was introduced by copy-paste from jz4740 driver
where it is really controls I2S clock gate.
Fixes: 226dfa4726eb ("clk: Add Ingenic jz4725b CGU driver")
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Tested-by: Siarhei Volkau <lis8215@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220205171849.687805-2-lis8215@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
commit 49a8f2bc8d88702783c7e163ec84374e9a022f71 upstream.
The call to of_clk_add_hw_provider was not undone on remove or on probe
failure, which could cause an oops on a subsequent attempt to retrieve
clocks for the removed device. Switch to the devm version of the
function to avoid this issue.
Fixes: 3044a860fd09 ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220112203816.1784610-1-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ff54938dd190d85f740b9bf9dde59b550936b621 ]
There are reports that 48kHz audio does not work on the WeTek Play 2
(which uses a GXBB SoC), while 44.1kHz audio works fine on the same
board. There are also reports of 48kHz audio working fine on GXL and
GXM SoCs, which are using an (almost) identical AIU (audio controller).
Experimenting has shown that MPLL0 is causing this problem. In the .dts
we have by default:
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
assigned-clock-rates = <294912000>,
<270950400>,
<393216000>;
The MPLL0 rate is divisible by 48kHz without remainder and the MPLL1
rate is divisible by 44.1kHz without remainder. Swapping these two clock
rates "fixes" 48kHz audio but breaks 44.1kHz audio.
Everything looks normal when looking at the info provided by the common
clock framework while playing 48kHz audio (via I2S with mclk-fs = 256):
mpll_prediv 1 1 0 2000000000
mpll0_div 1 1 0 294909641
mpll0 1 1 0 294909641
cts_amclk_sel 1 1 0 294909641
cts_amclk_div 1 1 0 12287902
cts_amclk 1 1 0 12287902
meson-clk-msr however shows that the actual MPLL0 clock is off by more
than 38MHz:
mp0_out 333322917 +/-10416Hz
The rate seen by meson-clk-msr is very close to what we would get when
SDM (the fractional part) was ignored:
(2000000000Hz * 16384) / ((16384 * 6) = 333.33MHz
If SDM was considered the we should get close to:
(2000000000Hz * 16384) / ((16384 * 6) + 12808) = 294.9MHz
Further experimenting shows that HHI_MPLL_CNTL7[15] does not have any
effect on the rate of MPLL0 as seen my meson-clk-msr (regardless of
whether that bit is zero or one the rate is always the same according to
meson-clk-msr). Using HHI_MPLL_CNTL[25] on the other hand as SDM_EN
results in SDM being considered for the rate output by the hardware. The
rate - as seen by meson-clk-msr - matches with what we expect when
SDM_EN is enabled (fractional part is being considered, resulting in a
294.9MHz output) or disable (fractional part being ignored, resulting in
a 333.33MHz output).
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20211031135006.1508796-1-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
enter shell
[ Upstream commit 6fc058a72f3b7b07fc4de6d66ad1f68951b00f6e ]
stm32's clk driver register two ltdc gate clk to clk core by
clk_hw_register_gate() and clk_hw_register_composite()
first: 'stm32f429_gates[]', clk name is 'ltdc', which no user to use.
second: 'stm32f429_aux_clk[]', clk name is 'lcd-tft', used by ltdc driver
both of them point to the same offset of stm32's RCC register. after
kernel enter console, clk core turn off ltdc's clk as 'stm32f429_gates[]'
is no one to use. but, actually 'stm32f429_aux_clk[]' is in use.
stm32f469/746/769 have the same issue, fix it.
Fixes: daf2d117cbca ("clk: stm32f4: Add lcd-tft clock")
Link: https://lore.kernel.org/linux-arm-kernel/1590564453-24499-7-git-send-email-dillon.minfei@gmail.com/
Link: https://lore.kernel.org/lkml/CAPTRvHkf0cK_4ZidM17rPo99gWDmxgqFt4CDUjqFFwkOeQeFDg@mail.gmail.com/
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/1635232282-3992-10-git-send-email-dillon.minfei@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 570727e9acfac1c2330a01dd5e1272e9c3acec08 ]
When attempting to use sys_pll1_80m as the parent for clko1, the
system hangs. This is due to the fact that the source select
for sys_pll1_80m was incorrectly pointing to m7_alt_pll_clk, which
doesn't yet exist.
According to Rev 3 of the TRM, The imx8mn_clko1_sels also incorrectly
references an osc_27m which does not exist, nor does an entry for
source select bits 010b. Fix both by inserting a dummy clock into
the missing space in the table and renaming the incorrectly name clock
with dummy.
Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20211117133202.775633-1-aford173@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ca011ef4af48a7af7b15afd8a4a44039dd04cea ]
The driver, once it found a divider, tries to round it up by increasing
the least significant bit of the fractional part by one when the
round_up argument is set and there's a remainder.
However, since it increases the divider it will actually reduce the
clock rate below what we were asking for, leading to issues with
clk_set_min_rate() that will complain that our rounded clock rate is
below the minimum of the rate.
Since the dividers are fairly precise already, let's remove that part so
that we can have clk_set_min_rate() working.
This is effectively a revert of 9c95b32ca093 ("clk: bcm2835: add a round
up ability to the clock divisor").
Fixes: 9c95b32ca093 ("clk: bcm2835: add a round up ability to the clock divisor")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-3-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5517357a4733d7cf7c17fc79d0530cfa47add372 ]
The driver currently tries to pick the closest rate that is lower than
the rate being requested.
This causes an issue with clk_set_min_rate() since it actively checks
for the rounded rate to be above the minimum that was just set.
Let's change the logic a bit to pick the closest rate to the requested
rate, no matter if it's actually higher or lower.
Fixes: 6d18b8adbe67 ("clk: bcm2835: Support for clock parent selection")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Tested-by: Nicolas Saenz Julienne <nsaenz@kernel.org> # boot and basic functionality
Tested-by: Michael Stapelberg <michael@stapelberg.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922125419.4125779-2-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
[ Upstream commit 54baf56eaa40aa5cdcd02b3c20d593e4e1211220 ]
Before commit fc0c209c147f ("clk: Allow parents to be specified without
string names") child clks couldn't find their parent until the parent
clk was added to a list in __clk_core_init(). After that commit, child
clks can reference their parent clks directly via a clk_hw pointer, or
they can lookup that clk_hw pointer via DT if the parent clk is
registered with an OF clk provider.
The common clk framework treats hw->core being non-NULL as "the clk is
registered" per the logic within clk_core_fill_parent_index():
parent = entry->hw->core;
/*
* We have a direct reference but it isn't registered yet?
* Orphan it and let clk_reparent() update the orphan status
* when the parent is registered.
*/
if (!parent)
Therefore we need to be extra careful to not set hw->core until the clk
is fully registered with the clk framework. Otherwise we can get into a
situation where a child finds a parent clk and we move the child clk off
the orphan list when the parent isn't actually registered, wrecking our
enable accounting and breaking critical clks.
Consider the following scenario:
CPU0 CPU1
---- ----
struct clk_hw clkBad;
struct clk_hw clkA;
clkA.init.parent_hws = { &clkBad };
clk_hw_register(&clkA) clk_hw_register(&clkBad)
... __clk_register()
hw->core = core
...
__clk_register()
__clk_core_init()
clk_prepare_lock()
__clk_init_parent()
clk_core_get_parent_by_index()
clk_core_fill_parent_index()
if (entry->hw) {
parent = entry->hw->core;
At this point, 'parent' points to clkBad even though clkBad hasn't been
fully registered yet. Ouch! A similar problem can happen if a clk
controller registers orphan clks that are referenced in the DT node of
another clk controller.
Let's fix all this by only setting the hw->core pointer underneath the
clk prepare lock in __clk_core_init(). This way we know that
clk_core_fill_parent_index() can't see hw->core be non-NULL until the
clk is fully registered.
Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names")
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Link: https://lore.kernel.org/r/20211109043438.4639-1-quic_mdtipton@quicinc.com
[sboyd@kernel.org: Reword commit text, update comment]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
commit 9a61f813fcc8d56d85fcf9ca6119cf2b5ac91dd5 upstream.
The function mux_get_parent() uses qcom_find_src_index() to find the
parent clock index, which is incorrect: qcom_find_src_index() uses src
enum for the lookup, while mux_get_parent() should use cfg field (which
corresponds to the register value). Add qcom_find_cfg_index() function
doing this kind of lookup and use it for mux parent lookup.
Fixes: df964016490b ("clk: qcom: add parent map for regmap mux")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211115233407.1046179-1-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
|
|
[ Upstream commit 05cf3ec00d460b50088d421fb878a0f83f57e262 ]
The gcc_aggre1_pnoc_ahb_clk is crucial for the proper MSM8996/APQ8096
functioning. If it gets disabled, several subsytems will stop working
(including eMMC/SDCC and USB). There are no in-kernel users of this
clock, so it is much simpler to remove from the kernel.
The clock was first removed in the commit 9e60de1cf270 ("clk: qcom:
Remove gcc_aggre1_pnoc_ahb_clk from msm8996") by Stephen Boyd, but got
added back in the commit b567752144e3 ("clk: qcom: Add some missing gcc
clks for msm8996") by Rajendra Nayak.
Let's remove it again in hope that nobody adds it back.
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Fixes: b567752144e3 ("clk: qcom: Add some missing gcc clks for msm8996")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211104011155.2209654-1-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f45c5b1c27293f834682e89003f88b3512329ab4 ]
Move the soc revision parsing to the initial probe, saving the driver
from parsing the register multiple times.
Use this variable to select the correct divisor table for the AHB clock.
Before this fix the A2 would have used the A0 table.
Fixes: 2d491066ccd4 ("clk: ast2600: Fix AHB clock divider for A1")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210922235449.213631-1-joel@jms.id.au
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ed84ef1cd7eddf933d4ffce2caa8161d6f947245 ]
Two fixes in one:
- In the "impose hardware constraints" block, the "logical" divider
value (aka. not translated to the hardware) was clamped to fit in the
register area, but this totally ignored the fact that the divider
value can itself have a fixed divider.
- The code that made sure that the divider value returned by the
function was a multiple of its own fixed divider could result in a
wrong value being calculated, because it was rounded down instead of
rounded up.
Fixes: 4afe2d1a6ed5 ("clk: ingenic: Allow divider value to be divided")
Co-developed-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211001172033.122329-1-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2f9d61869640f732599ec36b984c2b5c46067519 ]
The csi_sel mux register is located in the CCM register base and not the
CCM_ANALOG register base. So move it to the correct position in code.
Otherwise changing the parent of the csi clock can lead to a complete
system failure due to the CCM_ANALOG_PLL_SYS_TOG register being falsely
modified.
Also remove the SET_RATE_PARENT flag since one possible supply for the
csi_sel mux is the system PLL which we don't want to modify.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210927072857.3940880-1-s.riedmueller@phytec.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c405f5c15e9f6094f2fa1658e73e56f3058e2122 ]
Currently, at91 pmc driver always register the syscore_ops whatever
the status of the pmc node that has been found. When set as secure
and disabled, the pmc should not be accessed or this will generate
abort exceptions.
To avoid this, add a check on node availability before registering
the syscore operations.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20210913082633.110168-1-clement.leger@bootlin.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Fixes: b3b02eac33ed ("clk: at91: Add sama5d2 suspend/resume")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit af9617b419f77cf0b99702a7b2b0519da0d27715 ]
If we exit the for_each_of_cpu_node loop early, the reference on the
current node must be decremented, otherwise there is a leak.
Fixes: f756e362d938 ("clk: mvebu: add CPU clock driver for Armada 7K/8K")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/545df946044fc1fc05a4217cdf0054be7a79e49e.1619161112.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
|
|
[ Upstream commit af7651e67b9d5f7e63ea23b118e3672ac662244a ]
On clk_generated_determine_rate(), the requested rate could be outside
of clk's range. Limit the rate to the clock's range to not return an
error.
Fixes: df70aeef6083 ("clk: at91: add generated clock driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20210707131213.3283509-1-codrin.ciubotariu@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 64c9247b9e87e96e41cea545eb64727cee10c55c ]
Pass the ID of changeable parent at registration. This will allow
the scalability of this clock driver with regards to the changeable
parent ID for versions of this IP where changeable parent is not the
last one in the parents list (e.g. SAMA7G5). With this the clock flags
are set to zero in case we have no changeable parent. Also in
clk_generated_best_diff() the *best_diff variable is check against
tmp_diff variable using ">=" operator instead of ">" so that in case
the requested frequency could be obtained using fix parents + gck
dividers but the clock also supports changeable parent to be able
to force the usage of the changeable parent.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-11-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5bf7f4a249387a6062b9a14c8a77e7ba2fd6a53b ]
On sam9x60, there is not audio PLL and so I2S and classD have to use one
of the best matching parents for their generated clock.
Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lkml.kernel.org/r/20200131115816.12483-1-codrin.ciubotariu@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit aaedb9e00e5400220a8871180d23a83e67f29f63 upstream.
Since a few kernel releases the Pogoplug 4 has crashed like this
during boot:
Unable to handle kernel NULL pointer dereference at virtual address 00000002
(...)
[<c04116ec>] (strlen) from [<c00ead80>] (kstrdup+0x1c/0x4c)
[<c00ead80>] (kstrdup) from [<c04591d8>] (__clk_register+0x44/0x37c)
[<c04591d8>] (__clk_register) from [<c04595ec>] (clk_hw_register+0x20/0x44)
[<c04595ec>] (clk_hw_register) from [<c045bfa8>] (__clk_hw_register_mux+0x198/0x1e4)
[<c045bfa8>] (__clk_hw_register_mux) from [<c045c050>] (clk_register_mux_table+0x5c/0x6c)
[<c045c050>] (clk_register_mux_table) from [<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0+0x13c/0x1ac)
[<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0) from [<c0aceae0>] (of_clk_init+0x12c/0x214)
[<c0aceae0>] (of_clk_init) from [<c0ab576c>] (time_init+0x20/0x2c)
[<c0ab576c>] (time_init) from [<c0ab3d18>] (start_kernel+0x3dc/0x56c)
[<c0ab3d18>] (start_kernel) from [<00000000>] (0x0)
Code: e3130020 1afffffb e12fff1e c08a1078 (e5d03000)
This is because the "powersave" mux clock 0 was provided in an unterminated
array, which is required by the loop in the driver:
/* Count, allocate, and register clock muxes */
for (n = 0; desc[n].name;)
n++;
Here n will go out of bounds and then call clk_register_mux() on random
memory contents after the mux clock.
Fix this by terminating the array with a blank entry.
Fixes: 105299381d87 ("cpufreq: kirkwood: use the powersave multiplexer")
Cc: stable@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210814235514.403426-1-linus.walleij@linaro.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
commit f828b0bcacef189edbd247e9f48864fc36bfbe33 upstream.
clk_bulk_get_all() allocates an array of struct clk_bulk data for us
(unlike clk_bulk_get()), so we need to free it. Let's use the
clk_bulk_put_all() helper.
kmemleak complains, on an RK3399 Gru/Kevin system:
unreferenced object 0xffffff80045def00 (size 128):
comm "swapper/0", pid 1, jiffies 4294667682 (age 86.394s)
hex dump (first 32 bytes):
44 32 60 fe fe ff ff ff 00 00 00 00 00 00 00 00 D2`.............
48 32 60 fe fe ff ff ff 00 00 00 00 00 00 00 00 H2`.............
backtrace:
[<00000000742860d6>] __kmalloc+0x22c/0x39c
[<00000000b0493f2c>] clk_bulk_get_all+0x64/0x188
[<00000000325f5900>] devm_clk_bulk_get_all+0x58/0xa8
[<00000000175b9bc5>] dwc3_probe+0x8ac/0xb5c
[<000000009169e2f9>] platform_drv_probe+0x9c/0xbc
[<000000005c51e2ee>] really_probe+0x13c/0x378
[<00000000c47b1f24>] driver_probe_device+0x84/0xc0
[<00000000f870fcfb>] __device_attach_driver+0x94/0xb0
[<000000004d1b92ae>] bus_for_each_drv+0x8c/0xd8
[<00000000481d60c3>] __device_attach+0xc4/0x150
[<00000000a163bd36>] device_initial_probe+0x1c/0x28
[<00000000accb6bad>] bus_probe_device+0x3c/0x9c
[<000000001a199f89>] device_add+0x218/0x3cc
[<000000001bd84952>] of_device_add+0x40/0x50
[<000000009c658c29>] of_platform_device_create_pdata+0xac/0x100
[<0000000021c69ba4>] of_platform_bus_create+0x190/0x224
Fixes: f08c2e2865f6 ("clk: add managed version of clk_bulk_get_all")
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20210731025950.2238582-1-briannorris@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 24b5b1978cd5a80db58e2a19db2f9c36fe8d4f7a ]
Enabling the framebuffer leads to a system hang. Running, as a debug
hack, the store_pan() function in drivers/video/fbdev/core/fbsysfs.c
without taking the console_lock, allows to see the crash backtrace on
the serial line.
~ # echo 0 0 > /sys/class/graphics/fb0/pan
[ 9.719414] Unhandled exception: IPSR = 00000005 LR = fffffff1
[ 9.726937] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9
[ 9.733008] Hardware name: STM32 (Device Tree Support)
[ 9.738296] PC is at clk_gate_is_enabled+0x0/0x28
[ 9.743426] LR is at stm32f4_pll_div_set_rate+0xf/0x38
[ 9.748857] pc : [<0011e4be>] lr : [<0011f9e3>] psr: 0100000b
[ 9.755373] sp : 00bc7be0 ip : 00000000 fp : 001f3ac4
[ 9.760812] r10: 002610d0 r9 : 01efe920 r8 : 00540560
[ 9.766269] r7 : 02e7ddb0 r6 : 0173eed8 r5 : 00000000 r4 : 004027c0
[ 9.773081] r3 : 0011e4bf r2 : 02e7ddb0 r1 : 0173eed8 r0 : 1d3267b8
[ 9.779911] xPSR: 0100000b
[ 9.782719] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9
[ 9.788791] Hardware name: STM32 (Device Tree Support)
[ 9.794120] [<0000afa1>] (unwind_backtrace) from [<0000a33f>] (show_stack+0xb/0xc)
[ 9.802421] [<0000a33f>] (show_stack) from [<0000a8df>] (__invalid_entry+0x4b/0x4c)
The `pll_num' field in the post_div_data configuration contained a wrong
value which also referenced an uninitialized hardware clock when
clk_register_pll_div() was called.
Fixes: 517633ef630e ("clk: stm32f4: Add post divisor for I2S & SAI PLLs")
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Link: https://lore.kernel.org/r/20210725160725.10788-1-dariobin@libero.it
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
[ Upstream commit a7196048cd5168096c2c4f44a3939d7a6dcd06b9 ]
The PLLU (USB) consists of the PLL configuration itself and configuration
of the PLLU outputs. The PLLU programming is inconsistent on T30 vs T114,
where T114 immediately bails out if PLLU is enabled and T30 re-enables
a potentially already enabled PLL (left after bootloader) and then fully
reprograms it, which could be unsafe to do. The correct way should be to
skip enabling of the PLL if it's already enabled and then apply
configuration to the outputs. This patch doesn't fix any known problems,
it's a minor improvement.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 790c06cc5df263cdaff748670cc65958c81b0951 ]
R-Car D3 ZA2 clock is from PLL0D3 or S0,
and it can be controlled by ZA2CKCR.
It is needed for R-Car Sound, but is not used so far.
Using default settings is very enough at this point.
This patch adds it by DEF_FIXED().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmxclrmy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
|
|
[ Upstream commit 3c9b49b0031aefb81adfdba5ab0ddf3ca3a2cdc9 ]
Update the default register settings to include the VCO_RESET_CALCODE
settings (set by the SiLabs ClockBuilder software but not described in
the datasheet). Also update part of the initialization sequence to match
ClockBuilder and the datasheet.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-6-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 78f6f406026d688868223d5dbeb197a4f7e9a9fd ]
If the Si5341 is being initially programmed and has no stored NVM
configuration, some of the register contents may contain unexpected
values, such as zeros, which could cause divide by zero errors during
driver initialization. Trap errors caused by zero registers or zero clock
rates which could result in divide errors later in the code.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-4-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a8f1f03caa51aa7a69c671aa87c475034db7d368 ]
The following clocks of the Actions Semi Owl S500 SoC have been defined
to use a shared clock factor table 'bisp_factor_table[]': DE[1-2], VCE,
VDE, BISP, SENSOR[0-1]
There are several issues involved in this approach:
* 'bisp_factor_table[]' describes the configuration of a regular 8-rates
divider, so its usage is redundant. Additionally, judging by the BISP
clock context, it is incomplete since it maps only 8 out of 12
possible entries.
* The clocks mentioned above are not identical in terms of the available
rates, therefore cannot rely on the same factor table. Specifically,
BISP and SENSOR* are standard 12-rate dividers so their configuration
should rely on a proper clock div table, while VCE and VDE require a
factor table that is a actually a subset of the one needed for DE[1-2]
clocks.
Let's fix this by implementing the following:
* Add new factor tables 'de_factor_table' and 'hde_factor_table' to
properly handle DE[1-2], VCE and VDE clocks.
* Add a common div table 'std12rate_div_table' for BISP and SENSOR[0-1]
clocks converted to OWL_COMP_DIV.
* Drop the now unused 'bisp_factor_table[]'.
Additionally, drop the CLK_IGNORE_UNUSED flag for SENSOR[0-1] since
there is no reason to always keep ON those clocks.
Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/e675820a46cd9930d8d576c6cae61d41c1a8416f.1623354574.git.cristian.ciocaltea@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fe1f71e338d77814da3ef44e9f64d32981a6ccdf ]
Drop the unsupported entries in the factor table used for the SD[0-2]
clocks definitions on the Actions Semi Owl S500 SoC.
Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/196c948d708a22b8198c95f064a0f6b6820f9980.1623354574.git.cristian.ciocaltea@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2dca2a619a907579e3e65e7c1789230c2b912e88 ]
Use correct divider registers for the Actions Semi Owl S500 SoC's UART
clocks.
Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/4714d05982b19ac5fec2ed74f54be42d8238e392.1623354574.git.cristian.ciocaltea@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bc794f8c56abddf709f1f84fcb2a3c9e7d9cc9b4 ]
While some SoC samples are able to lock with a PLL factor of 55, others
samples can't. ATM, a minimum of 60 appears to work on all the samples
I have tried.
Even with 60, it sometimes takes a long time for the PLL to eventually
lock. The documentation says that the minimum rate of these PLLs DCO
should be 3GHz, a factor of 125. Let's use that to be on the safe side.
With factor range changed, the PLL seems to lock quickly (enough) so far.
It is still unclear if the range was the only reason for the delay.
Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210429090325.60970-1-jbrunet@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
commit 25de4ce5ed02994aea8bc111d133308f6fd62566 upstream.
There is a timer wrap issue on dra7 for the ARM architected timer.
In a typical clock configuration the timer fails to wrap after 388 days.
To work around the issue, we need to use timer-ti-dm percpu timers instead.
Let's configure dmtimer3 and 4 as percpu timers by default, and warn about
the issue if the dtb is not configured properly.
For more information, please see the errata for "AM572x Sitara Processors
Silicon Revisions 1.1, 2.0":
https://www.ti.com/lit/er/sprz429m/sprz429m.pdf
The concept is based on earlier reference patches done by Tero Kristo and
Keerthy.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
[tony@atomide.com: backported to 5.4.y]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
commit 34138a59b92c1a30649a18ec442d2e61f3bc34dd upstream.
This clock must be always enabled to allow access to any registers in
fsys1 CMU. Until proper solution based on runtime PM is applied
(similar to what was done for Exynos5433), mark that clock as critical
so it won't be disabled.
It was observed on Samsung Galaxy S6 device (based on Exynos7420), where
UFS module is probed before pmic used to power that device.
In this case defer probe was happening and that clock was disabled by
UFS driver, causing whole boot to hang on next CMU access.
Fixes: 753195a749a6 ("clk: samsung: exynos7: Correct CMU_FSYS1 clocks names")
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/linux-clk/20201024154346.9589-1-pawel.mikolaj.chmiel@gmail.com
[s.nawrocki: Added comment in the code]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
[ Upstream commit f6b1340dc751a6caa2a0567b667d0f4f4172cd58 ]
The for-loop iterates with a u8 loop counter i and compares this
with the loop upper limit of num_parents that is an int type.
There is a potential infinite loop if num_parents is larger than
the u8 loop counter. Fix this by making the loop counter the same
type as num_parents. Also make num_parents an unsigned int to
match the return type of the call to clk_hw_get_num_parents.
Addresses-Coverity: ("Infinite loop")
Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210409090104.629722-1-colin.king@canonical.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 790b516ada10a4dcc0f0a56dc0ced475d86d5820 ]
CONFIG_QCOM_A53PLL is tristate option and therefore this driver can be
compiled as a module. This patch adds missing MODULE_DEVICE_TABLE
definition which generates correct modalias for automatic loading of
this driver when it is built as an external module.
Fixes: 0c6ab1b8f894 ("clk: qcom: Add A53 PLL support")
Signed-off-by: Chen Hui <clare.chenhui@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210409082352.233810-3-clare.chenhui@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d7fd3f9f53df8bb2212dff70f66f12cae0e1a653 ]
The round_rate callback should only perform rate calculation and not
involve calling zynqmp_pll_set_mode to change the pll mode. So let's
move zynqmp_pll_set_mode out of round_rate and to set_rate callback.
Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver")
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210406154015.602779-1-quanyang.wang@windriver.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
Bruce Ashfield
Taniya Das
Siarhei Volkau
Robert Hancock
Martin Blumenstingl
Dillon Min
Adam Ford
Maxime Ripard
Mike Tipton
Dmitry Baryshkov
Joel Stanley
Paul Cercueil
Stefan Riedmueller
Clément Léger
Christophe JAILLET
Codrin Ciubotariu
Claudiu Beznea
Linus Walleij
Brian Norris
Dario Binacchi
Dmitry Osipenko
Kuninori Morimoto
Cristian Ciocaltea
Jerome Brunet
Tony Lindgren
Paweł Chmiel
Colin Ian King
Chen Hui
Quanyang Wang